Home

Panasonic NN-H765 Microwave Oven User Manual

1. Store To store the changes press gt Ex key The programme is now stored D Repeat steps Q to for each programme to be stored bi To return to previous menu press the key To exit the menu press the key Naming of Channel of Channel If required you can give a name to the TV channel 1 Press the key With the w key select Install and the Ex key to enter the Install menu e Use the v key to select Name and the gt key to enter name mode Use the A Y keys to select the programme you want to name and the key to enter naming mode Use the A Y keys to select the characters maximum of 5 characters and use the 4 keys to move around the name display area O Press gt 16 key until the name appears at the top right hand corner of the TV screen The name is now stored 21 Using the Contrast and NR Noise Reduction features Press the key With the v key select Features and the gt key to enter the Features menu Use the A Y keys to select Contrast or NR Noise Reduction and the lt keys to select an On or Off option To return to previous menu press the key Goo 000 To exit the menu press the key Definition of the feature settings Contrast optimise the total contrast of the picture for improved picture visibility select On option to activate feature NR Noise Reduction improves no
2. Description Picture settings Brightness Contrast Adjusts the brightness and contrast Colour Temp Changes the colour rendering Cool bluer Normal balance or Warm redder Audio Selection Chooses the sound reproduced on the TV PC or TV Supported PC Resolutions 640 x 480 60 Hz 800 x 600 72 Hz 640 x 480 67 Hz 800 x 600 75 Hz 1024 x 768 60 Hz 1024 x 768 70 Hz 1024 x 768 75 Hz 640 x 480 72 Hz 640 x 480 75 Hz 800 x 600 56 Hz 800 x 600 60 Hz Description of Features Format Chooses between full screen or native format of the PC screen PIP Picture in Picture Displays a PIP screen to watch TV programmes at the same time Mode Selection When you connect PC or HD equipment supporting resolutions of 480p 576p or 720p the Mode Selection in the Features menu will be highlighted This will allow you to select between the PC and HD mode If it does not support the 480p 576p or 720p resolutions you cannot access this function Using the PIP feature The PIP Picture in Picture feature allows you to call up a PIP screen of a TV programme while you are in PC mode IMPORTANT To call up a PIP screen of the TV programme the following step must be taken HDMI 1 or HDMI 2 input MUST be connected to the DVI output of the PC equipment Use a HDMI to DVI adaptor cable to do the connection The PIP menu items PIP Size Horizontal and Verti
3. VOLUME POWER CAUTION This a Class 1 apparatus It must be connected to a MAINS socket out with a protective earthing connection ANTENNA 150 42 Plasma 37 TV LCD TV Television keys and connectors O POWER b to switch the TV on and off The power remains on even when the Power switch is turned off 2 VOLUME to adjust sound level MENU to access or close menus The PROGRAM keys can be used to select a menu item and the VOLUME key to enter into the selected menu item and make adjustments PROGRAM CHANNEL to select programmes e POWER socket Insert the mains plug into a wall socket 6 DVI Audio Input for connecting a HD high definition equipment or computer with DVI output 9 Component Video Inputs Audio Inputs to connect to equipment like DVD Set top box which have the same sockets Connect the audio inputs of the TV to the outputs of the device together with the Component Video Inputs Cl Common Interface slot to connect a CAM Conditional Access Module and a smartcard DATA socket for Service use only SPDIF socket to connect to an amplifier with coaxial digital input only available in Digital Mode o HDMI 1 HDMI 2 sockets to connect to set top boxes DVD player recorder High Definition receiver equipment or Personal Computer EXT1 and EXT2 socket connect to equipmen
4. The Conditional Access Module CAM menu provides access to functions contained on the CAM The module can be inserted into the Common Interface Cl slot located at the side of the 26 32 TV and at the rear bottom of the 37 42 TV Remove the sticker before inserting module Remove sticker Common Interface slot 26 1 32 TV Front side of module s 2 s Reverse side of module 26 1 32 TV Remove sticker AUDIO R IN AUDIO IN ols 37 42 TV Reverse side of module IMPORTANT Always switch the TV off before inserting or removing the module Inserting the CAM O switch off the TV Some modules come with a viewing card When using this type of module first insert the viewing card into the module before inserting the module into the Cl slot on the TV insert the module If you are inserting the module from the rear of the TV 26 32 the 2 arrows indicated on top side of the card should be facing you If you are inserting the module from the front of the TV screen 26 32 the reverse side of the module without the arrows should be facing you For 37 42 TV if you inserting the module from behind of the TV the reverse side of the module without the arrows should be facing you Switch on the TV MENU Press the key to switch the TV to Digital mode move to the Access Restrictions menu the Conditional Access
5. fe O Close O O Use the 4 keys to set to On option and press 0K key to exit You can then access the other adjustments Warning the moment you use any kind of access restriction you need to fill in the pin code when you schedule a programme for recording Maturity rating select your preferred rating to lock the channel Maturity rating will only block certain programmes if the broadcaster provides data with the programme TV channels select the TV channel you want to lock and press key Radio station select the radio station you want to lock and press key Change pin code press gt keyto enter the menu Follow the on screen instruction to change your access code The default pin code is 1234 If you have forgotten your personal code you can reset to the default pin code 1234 by enter the universal code 0711 To return to previous menu press the lt key DIGITAL TV O Press the key to exit the menu The TV is equipped with a Common Interface Cl slot see page 19 A Cl module can enable additional services for example Pay TV The Access Restrictions menu will show the Cl Access Restrictions when a Cl module is installed The module is responsible for the messages and texts on screen In case of failure or strange behaviour you must call your Cl service provider Setting up your favourite list This menu enables you to create a favourite list with your prefered TV cha
6. Basque Catalan Croatian Czech Danish Dutch English Finnish French Gaelic Gallegan German Greek Hungarian Italian Norwegian Polish Portuguese Russian Serb Slovak Spanish Swedish Turkish Welsh On Off Auto Yes No Cesky Deutsch English Espa ol Francais Italiano Magyar Norski Polski Portugu s Suomi Svenska Australia Austria Belgium Czech Denmark Finland France Germany Hungary Italy Netherlands Norway Poland Portugal Spain Sweden Switzerland United Kingdom PCM MPEG AC3 PCM MPEG Yes No On Off Overview of Digital main menu and sub menus Setup Installation Service lists Rearrange services View new TV channels Listen to new Radio Stations Service setup Add new services Search TV channels found Radio station found Other services found Store Discard Reinstall all services Search TV channels found Radio station found Other services found Store Discard Test reception Frequency Network name Signal quality Signal strength Switch on for the first time The first time the TV set is switched on a With the cursor keys select Language congratulation message will appear on screen Country or Time Zone and check if the The language of which changes every 5 seconds adjustment is according to your preferences If the message is not displayed press and hold If necessary use the cursor keys to make down the MENU key on the side of the TV
7. O Use the v key to enter into the Preset service list or press gt key to access Today list Press the RED key to call up the Record menu Name See it saw Service Enter your pin code if locked 2 BBC 2 Day Month Start time End time Audio language 16 02 12 15 12 30 O Store Cancel OClose O Use the a v keys to select a setting and press gt to enter into the sub menu Make your adjustment and press key or 4 key to exit D Name the selected programme will be displayed here Service you can change the number of the programme you want to record Press key to confirm E Note it is only bossible to change to a number that is in the currently selected favourite list Enter your pin code if locked enter your secret code only if you have activated the access restriction feature see page 14 Press key to confirm Day amp Month enter the date by using the or P age keys Press key to exit Start time enter the start time End time enter the end time Audio language select your language and confirm with key Subtitle language make your selection and confirm with key Subtitles for hearing oa select Yes or No and confirm with key Occurrence select Once Daily or Weekly and confirm with key O Press the RED key to store your recording The TV guide reappears You can press the GREEN key to display the list of recordings you
8. Emphasize sensation to action Bass and Treble boosted Music Emphasize low tone Bass boosted Voice Emphasize high tone Treble boosted Personal Sound settings are set to your preference NOTE The Personal setting is the setting that you set up using the Picture Sound menu in the main menu This is the only setting in the Smart Picture Sound settings that can be changed All other settings are pre set at the factory A o 1 Teletext is an information system broadcast by certain channels which can be consulted like a newspaper It also offers access to subtitles for viewers with hearing problems or who are not familiar with the transmission language cable networks satellite channels etc 1 Teletext call This is used to switch on or off teletext display The summary appears with a list of items that can be accessed Each item has a corresponding 3 digit page number If channel selected does not broadcast teletext the indication 100 will be displayed and the screen will remain blank 3 Proceed to exit teletext and select another channel o Selecting a page Enter the number of the page required 5 using the 0 to 9 keys or P keys u Example page 120 enter 120 The pie OO number is displayed at the top left corner un u of the screen When the page is located the counter stops searching Repeat this operation to view another page If the counter continues to search this means that the page i
9. Audio CDs and digital audio tapes DATs AC3 Audio Coding 3 also known as Dolby Digital is supported as optional audio standard by Digital Video Broadcast Dolby Digtial signal adapts to the viewer s playback system delivering the best posible sound to all viewers regardless of their equipment MPEG Moving Picture Experts Group is the nickname given to a family of International Standards used for coding audio visual information in a digital compressed format 33 Centre Frequencies Table in KHz Digital Frequency Nominal Centre Digital Frequency Nominal Centre Channel Frequency KHz Channel Frequency KHz UK United Kingdom 35 25 87 61 France 03 8717 0033 Espa a 9 17 45 62 46 Italia 02 48 27 11 53 Deutschland 0696 698 4712 Suomi 09 2290 1908 Sverige 08 632 0016 34 26PF5521D 32PF5521D 37PF5521D 42PF5521D Panel screen size 660 mm 26 800 mm 32 940 mm 37 1070 mm 42 Audio output 2 15 W 2 15 W 2 15 W TV System PAL SECAM Video playback NTSC PAL SECAM Sound System Mono Nicam Stereo Virtual Dolby Surround Connectivity Rear Antenna In 75 Scart 1 Scart 2 HDMI 1 HDMI 2 Component Video Input SPDIF socket 37 42 TV Common Interface slot 37 42 TV Audio In Video In S Video In Headphone SPDIF socket 26 32 Common Interface slot 26 32 TV Power consumption 120 W 152 W 160 W Set dimensions with stand Width Depth Height N
10. Module menu is displayed as the last item in the list o Access the Conditional Access Module menu 9 Press button as indicated on the screen to access the CAM s functions If no module is inserted or the module is not inserted properly the Conditional Access Module menu will not be displayed If you have inserted a module check that it is fully inserted in the correct manner as mentioned in step 3 above The functions that now appear on screen are dependent on the contents of the selected Conditional Access Module in your country Refer to the instruction supplied with the module or contact the vendor 19 20 Automatic tuning of analogue programmes This menu allows you to automatically search for all the analogue programmes available in your region Before you automatically search for all the analogue programmes ensure the TV is in analogue mode If it is in digital mode press the Analogue Digital key to enter the analogue mode 1 From the analogue mode press the key 2 Using the v key select Install and the gt key to enter the Install menu Using the_v key select Auto Store and the gt key to start automatic searching of the channels All the available TV programmes will be stored This operation takes a few minutes The display shows the progress of the search and the number of programmes found e Auto Important To exit or interrupt the search befor
11. a position where light does not fall directly on the screen and at some distance away from radiators or other sources of heat Leave a space of at least 5 cm all around the TV for ventilation making sure that curtains cupboards etc cannot obstruct the air flow through the ventilation apertures The TV is intended for use in a domestic environment only and should never be operated or stored in excessively hot or humid atmospheres General Points Please take note of the section entitled Tips at the end of this booklet Interference The Department of Trade and Industry operates a Radio Interference Investigation Service to help TV licence holders improve reception of BBC and IBA programmes where they are being spoilt by interference If your dealer cannot help ask at a main Post Office for the booklet How to Improve Television and Radio Reception Mains connection Before connecting the TV to the mains check that the mains supply voltage corresponds to the voltage printed on the type plate on the rear panel of the TV If the mains voltage is different consult your dealer This apparatus is fitted with an approved moulded 13AMP plug Should it become necessary to replace the mains fuse this must be replaced with a fuse of the same value as indicated on the plug 1 Remove fuse cover and fuse 2 The replacement fuse must comply with BS 1362 and have the ASTA approval mark If the fuse is lost make contact with yo
12. display the selected mode The remote control automatically returns to TV mode NOTE Functions not available to Philips DVD R device The following keys are operational depending on the equipment standby confirm selection adjustment fast forward cance fast rewind 9 Y bs navigation and adjustment of menu items am fast forward e 8 recording digit keys for direct program selection pause program selection ii O stop gt audio selection gg exit menu display menu 2 What is Digital Television Digital Television offers a far wider choice of TV viewing free from the interference that you may experience on analogue TV It promises to transform television viewing into a whole new experience There is a greater selection of widescreen programming Many of your favourite programmes are in widescreen on the digital channels something the analogue TV cannot do properly There is new whole experience of interactivity on digital TV By using your remote control you can access all kinds of information like the digital text which is much clearer than the old teletext system It gives you the added enjoyment of related information running alongside the programme you are watching You can also access an Electronic Programme Guide that provides you with a quick and easy way to view a complete list of digital programmes as you would in a newspaper or TV magazine Digital or ENE When t
13. favourite list is displayed O Use the v key to enter into the Preset service list or press gt key to access Today list Use the lt keys to select a programme O The TV guide features are displayed at the bottom of the screen Use the coloured keys red green yellow blue or white to activate them Record red key this feature enables you to record a digital channel even the TV is in standby mode You will still have to programme your video recorder If you wish to continue watching another digital channel after setting a timer you can do so by changing channels in the normal way If your recorder supports pin 8 recording switch your recorder to that mode Pin 8 recording refers to the technique of using the pin 8 signal on a Scart cable normally used to indicate the presence of a signal for display on the TV connected between an idTV Set top box and a VCR to switch the recorder into record mode The pin 8 signal effectively acts as a record on off switch whilst additionally signalling thes aspect ratio of the video signal carried on the cable IMPORTANT In digital mode if you change the channel when recording starts a message will appear on the screen to confirm whether you want to stop recording Select Yes if you want to stop recording The TV will switch to the channel you have changed If you select No the TV will record the last channel you have selected During recording you are u
14. have set O If you have finished watching television you must leave it in standby in order for the recording programme to be activated IMPORTANT never switch off the TV with the power button when a recording has been programmed but use the key on the remote control O If you wish to continue watching another digital channel after setting a timer you can do so by changing channels in the normal way Important In digital mode if you change the channel when the recording starts the TV will record the last channel you have selected O If you are watching another digital channel when the timer is due to start the timer alarm will sound and present you with the option of switching channels or continuing to watch the current channel O You can also watch analogue channels while recording digital channels Press the 4 0 key to switch the TV to analogue mode 17 18 Digital Teletext Available in U K only Digital teletext services differ greatly from analogue teletext When you switch to a Digital teletext service the images you see contain graphics and text which are laid out and controlled in a manner decided by the broadcaster Some digital channels which you select like any other channel offer dedicated teletext services Some digital channels also offer information on the programme being broadcast a message or an instruction may appear on the screen 1 To
15. the to keys to enter the frequency of the digital channel you want to test Use the gt key to move to the next character space Your TV magazine can provide the list of digital channel numbers Refer to the frequency table on page 36 If after keying the frequency the reception is still poor you can try improving renewing adjusting or updating the aerial It is however advisable to contact a specialised aerial installer in order to achieve best results O After entering the frequency use the key to exit Frequency slot i O To return to previous menu press the 4 key DIGITALTV Press the key to exit the menu Language and location preferences This menu allows you to select your preferred language for audio subtitle teletext and menu and make changes to the location country and time zone DIGITAL TV O From the digital mode press the key to display the setup menu O Use the v key to select Preferences and press gt key Setup 11 46 Preferences Audio Subtitle Teletext Subtitling Mode Subtitling for hearing impaired Language Location Digital Audio Output e System Select your preferred language O O O Close O Select Language Location or Digital Audio Output vw and press gt key O Use the A Y keys to select a setting and press gt key to enter into the sub menu Make your adjustment and press key or 4 key to exit u Language default settings Audio to se
16. to the selected language However you can still change your preferences before you start a service scan This activity will reset both the Digital and Analogue mode to factory default settings 10 Understanding the information on the banner When you select a digital programme an information banner is displayed for a few seconds at the top of the screen Banner description programme preset start and number time symbols clock 11 06 11 09 Snooker O m 11 46 Minutes left 14 channel name programme title remaining time of programme The banner contains information on the preset number channel name programme duration transmission clock programme title and the time remaining of the current programme Symbols description i More information about this programme is available press the key once to display and the second time or remove it GJ Subtitling is available if you want to o display them press the key or the key to access the options menu and select subtitles Indicates Analogue Teletext is available in Digital mode HI Other audio languages are availables and can be selected in the options menu selected Favourite list is displayed in the one of the colour red green yellow or blue of the activated list Note A white colour will appear if the programme is stored in one or more of the favourite list which is currently not activat
17. way as the TV Picture and Sound settings see page 23 HD Features Timer Functions of the Sleeptimer and Timer are the same as the TV Sleeptimer and Timer functions and work in exactly the same way as the TV Sleeptimer and Timer functions see page 22 PIP Display a PIP screen to watch TV programmes at the same time The PIP menu items PIP Size Horizontal and Vertical work in exactly the same way as when calling a PIP screen in TV mode For description of PIP menu items and how it works refer to the section on Using the PIP Picture in Picture Feature page 24 Horizontal Shift Adjust the horizontal position of the image Mode Selection When you connect PC or HD equipment supporting resolutions of 480p 576p or 720p the Mode Selection in the Features menu will be highlighted This will allow you to select between the PC and HD mode If it does not support the 480p 576p or 720p resolutions you cannot access this function Mode Selection Supported HD format 480p 576p 720p 1080i NOTE For more details on connection to the HD equipment see CONNECTION GUIDE Your Philips TV is HDMI compliant If you do not get a good picture please change the video format on your device DVD player cable set top box etc to a standard format For example for DVD player select 576p 720p or 1080i For PC select 640 x 480 800 x 600 or 1024 x 768 If the problem persists please refer to yo
18. 26PF5521D 32PF5521D 37PF5521D 42PF5521D PHILIDS kaka E E E E ES SE Introduction Thank you for purchasing this television set This handbook has been designed to help you install and operate your TV set We strongly recommend that you read it thoroughly Table of Contents of Contents Safety Information Useful Tips ise a aa ee EE 2 Television keys and connectors coi a Rar et e ee RR ee d 3 Remote control keys i u u tor Er RUE gia dh bod dc RE eqs 5 Remote control keys Other 6 What is Digital Television Digital and Analogue channels Overview of Digital main menu and sub menus Switch on for the first time Understanding the information on the banner Rearrange services View or Listen to new TV services Add new services Reinstall all services Test reception Language and location preferences Access restrictions Setting up your favourite list Information Downloading new software Using the Options menu TV guide Recording function Digital text Using the Conditional Access Module CAM Automatic tuning of analogue programmes Programme sort Manual tuning of analogue programmes Naming of channel Using the Sleeptimer feature Using the Contrast and NR Noise Reduction features Timer function Picture and Sound settings Using the PIP Picture in Picture feature Screen Formats Using the Active Control feature Usi
19. ION GUIDE Screen Formats The pictures you receive may be transmitted in 16 9 format wide screen or 4 3 format conventional screen 4 3 pictures sometimes have a black band at the left and right of the screen letterbox format This function allows you to optimise the picture display on screen If your televison is equipped with a 16 9 screen automatic switching which will select the correct screen format provided the specific signals are transmitted with the programmes 4 3 The picture is reproduced in 4 3 format and a black band is displayed on either side of the picture Movie Expand 14 9 The picture is enlarged to 14 9 format a thin black band remains on both sides of the picture Movie Expand 16 9 The picture is enlarged to 16 9 format This mode is recommended when displaying pictures which have black bands at the top and bottom letterbox format Subtitle Zoom This mode is used to display 4 3 pictures using the full surface of the screen leaving the sub titles visible Superzoom This mode is used to display 4 3 pictures using the full surface of the screen by enlarging the sides of the picture Widescreen O CO The picture is displayed in the correct proportions of images transmitted in 16 9 O Note If you display a 4 3 picture in this mode it will be enlarged horizontally 25 26 Using the Active Control feature Using the Active Control feature Active Control feature automatic
20. TV mode it is used to display the Source the current programme list to select TV or peripheral equipment It also used as an edit or back space key when connected to EXT1 EXT2 SVHS2 EXT3 SVHS3 you are naming your favourite channel see page EXT 4 HDMI 1 HDMI 2 or switch to Digital TV 14 do digital mode and page 21 for anlaogue TV mode Digital TV Radi D pisita ae Teletext On Off E See pages 27 28 In digital mode it is used to access digital radio stations Press the OK key to access radio list Note To return to digital video mode press the PIP on off Display PIP screen on TV Subsequent pressing of the key changes size of the window see page Dgital TV Radio key again 24 Smart Picture Sound O O Pixel O Accesses a series of picture and sound settings Unused key see page 26 Active control CONTROL Options DVD AUX a I For Options function see page 15 Optimises the picture quality depending on the quality of the incoming signal and ambient light For DVD AUX function see page 6 conditions see page 26 Digital menu To display or exit from the digital menu when e Photo viewer TV is in digital mode Unused key D ok Confirms selection Also access program list in Digital mode Remote Control keys DVD or AUX Press the SELECT SELECT key to select the required mode DVD or AUX amplifier The remote control indicator lights up to
21. able to always accept and download the software ln case new software is available you will see a message when you switch on the TV A message indicating the date and the duration of download is indicated in the menu Press the key to proceed Important Leave your TV in standby to allow upgrade to take place Do not power on your main switch problem occurred during the download of the new software you will be informed of the next scheduled software download Press the 0K key to proceed to use your TV normally f download is successful a congratulatory message will appear Press the key to accept New software and upgrade instructions may be obtained from the website www philips com To return to previous menu press the lt key DIGITALTV Press the key to exit the menu Using the Options menu the Options menu This menu gives you direct access to the favourite list the language selection and some other selections O From the digital mode press the white OPTIONS key to display the options menu O Use the A Y keys to select a setting and press gt key to enter the sub menu Options Favourites lt gt None Subtitle language List 1 Audio language List 2 Mode List 3 List 4 Selects the active favourite list Favourites use the a Y keys to select your favourite list and confirm with 0K key The none option deactivate any favourite list To create your ow
22. al keys For direct access to programmes For a 2 3 digit programme number the second third digit must be entered before the dash disappears The number the name and the sound mode in analogue mode are displayed for a few seconds Screen information In digital mode press the key once to display the information banner and the second time to exit information banner see page 11 In analogue mode display remove the programme number the sound mode the remaining time of the sleeptimer and the signal strength indicator E Teletext Sound mode In teletext mode it functions as a teletext key see pages 27 28 In TV mode it is used to force programmes in Stereo and Nicam Stereo to Mono or for bilingual programmes to choose between Dualror Dual TI The Mono indication is red when in forced position Subtitle mode In digital mode it activates or deactivates the subtitle mode Remote Control keys Control keys Teletext Screen Format D TV Guide See page 16 In teletext mode it functions as a teletext key see pages 27 28 Programme selection In TV mode it is used to access different To access the next or previous programme or screen formats Es page 25 page in digital menu BACK AV Teletext CJ D Alternate channel Edit or back space In teletext mode it functions as a teletext In Analogue Digital mode it allows you to key see page 27 28 alternate the previously viewed programme and In
23. ally adjusts the picture setting for optimal picture quality continuously under any signal conditions ACTIVE 1 Press the e key repeatedly to toggle between Active Control Off and Active Control On options Active Control Off Active Control On L Select the Active Control On option to activate the Active Control feature Select the Active Control Off option to deactivate the Active Control feature Using the Smart Picture and Sound Features Smart Picture feature offers you a choice of 5 picture settings namely Multimedia Personal Rich Natural and Soft SMART Press the button repeatedly to cycle through the settings to select your desired mode cs or Smart Sound feature offers you a choice of 4 sound settings namely Theatre Music Voice and Personal SMART Press the button repeatedly to cycle through the settings to select your desired mode Music or Personal pe o Definition of Picture Settings Rich Brilliant and sharp picture settings suitable for bright environment and for use in demonstrations to show off the quality of the TV on good sources Natural Reference mode for living room conditions and average signals Soft Intended for bad quality signals Suitable for living room viewing Multimedia Best for graphical applications Personal Pictures settings are set to your preference Definition of Sound Settings Theatre
24. cal works in exactly the same way as when calling a PIP screen in TV mode Except for HDMI there is no selection for other source No Selection For description of PIP menu items and how it works refer to the section on Using the PIP Picture in Picture Feature page 24 NOTE For more details on connection to the PC equipment see CONNECTION GUIDE 29 Using the TV in HD High Definition Mode HD Mode The HD High Definition mode allows you to enjoy clearer and sharper pictures if you are using a HD equipment that can transmit high definition programming IMPORTANT For the TV to function in HD mode the following steps must be taken O HDMI 1 or HDMI 2 input MUST be connected to the HDMI DVI output of the HD equipment Use a HDMI to DVI adaptor if DVI is connected For more information refer to Connection Guide Press the key to display Source List and use the A Y key to select HDMI 1 or HDMI 2 e Use the p key to switch to the selected source Source Source Using the HD menus Press the key to display the HD menu Use the Y key to access the settings and the lt key to select or adjust setting HD Install menu Note You cannot access Install in the HD menu There is NO Install function in HD mode HD Picture and Sound settings Functions of HD Picture and Sound settings are the same as the TV Picture and Sound settings and work in exactly the same
25. connections Wrong source selected Wrong display resolution Wrong setting of PC graphic card S Video colour becomes faint Wrong detection of signal Black bar on top and bottom of screen in PC mode PC refresh rate too high What you should do DIGITAL TV Press the key to exit menu from screen Press the AY key again to display menu Press the W key to select the menu second item on the menu and the P key to enter into the next menu level Press the gt key again and use the Y key to select the fifth menu item Press the gt key enter into the next menu level Use the A keys to to select correct language Press the key confirm selection DIGITAL TV Press the key to exit menu from screen Press AV key and select TV mode You can now access Install menu by the analogue TV menu key Check whether connections are correct For more details on connection to the PC equipment see Connection Guide Check whether the source is correctly selected Press button to enter Source list and select the correct source Check whether you have configured the computer on a compatible display resolution see Using your TV as PC Monitor on page 29 Check graphic card setting of PC Check whether power cord is properly connected Press the P key on the remote control and do a channel up followed by a channel down Change PC refresh rate to 60 Hz Cannot access dig
26. ctivate the settings include Once for a single alarm Daily for each day Off to cancel to put the TV set in standby It will automatically come on at the time programmed If you leave the TV set on it will just change programmes at the time entered and will go to standby mode at the Stop Time Picture and Sound Settings E Picture and Sound Settings 1 Press the key Use the A Y key to select Picture or Sound Use the lt 99 key to enter Picture or Sound menu Equalizer Use the A Y keys to select a Picture or Sound setting and the 4 key to adjust TV To return to previous menu press the key 16 To exit the menu press the key Description of the Picture settings Brightness this changes picture brilliance Colour this changes the intensity of the colour Contrast this changes the difference between the light and dark tones Sharpness this increases or decreases the sharpness level to improve details in the picture Colour Temp this changes the colour rendering Cool bluer Normal balanced or Warm redder Store to store the picture adjustments and settings Description of the Sound settings Equalizer to adjust the sound tone from bass 120 Hz to treble 10 KHz Balance this balances the sound on the left and right speakers Delta Volume this is used to compensate any volume differences between the different pro
27. d press gt key O From the digital mode press the key Select Reinstall all services v and press key Press key to start the installation A search is then made for all digital services Service lists Add new services which are then stored automatically Service setup ees Reinstall all services to display the setup menu Setu Installation When the search is completed the menu will Test reception ste T 8 indicate the number of digital services found When the search is complete press key to store the services i Install and manage services e OClose O To return to previous menu press the 4 key DIGITAL TV Q Press the key to exit the menu Test reception reception This menu allows you to check the strengh of the signal you are receiving through your aerial DIGITAL TV O From the digital mode press the key to display the setup menu Use the v key to select installation and press gt key to display the installation menu Setu Installation Service lists e Frequency Network name Service setup e Signal quality Signal strength Test reception eg Test signal quality Use the v key to select Test reception and press gt key You obtain an indication of the actual programme frequency the network name the signal quality and strength O Use the key to enter the Frequency slot and use
28. e it is completed press the tv key If you interrupt search during auto store not all channels will be stored For all channels to be stored you need to do a complete auto store search again NOTE ATS Automatic Tuning System feature If the transmitter or cable network sends the automatic sort signal the programmes will be numbered correctly In this case the installation is complete If this is not the case you need to use the Sort menu to number the programmes correctly ACI Automatic Channel Installation feature If a cable system or a TV channel which broadcasts ACI is detected a programme list appears Without ACI broadcast the channels are numbered according to your language and country selection You can use the Sort menu to renumber them You cannot select Language or Country in Analogue mode If you want to select Language or Country you have to exit Analogue mode and enter into Digital mode to do so refer to Language and location preferences on page 13 Program Sort rogram Sort 1 Press the key The TV Menu is displayed on the screen Use the v key select the Install menu and the gt 99 key to enter the Install menu Use the v key to select Sort and the key to enter sort mode 0 Select the programme number you want to move using the A Y keys and the gt key to enter sorting mode The arrow cursor now points to the left Use the A Y keys to sel
29. ect the new programme number and confirm with the 4 key The arrow points to the right and sorting is completed Repeat steps Oo and o for each programme number you wish to re number To return to previous menu press the TV key To exit the menu press the key Manual tuning of analogue programmes This menu is used to store the programmes one at a time 1 Press the key 12 With the w key select Install and the Ex key to enter the Install menu Use the v key to select Manual Store and the gt Ex key to enter Manual Store menu Use the A Y keys to select the items in the Manual Store menu to adjust or activate System Use the lt gt keys to select Europe automatic detection or France LL standard or UK 1 standard West Europe BG standard East Europe DK standard or Except for France LL standard you must select France System Europe Install 6 Search Press the key The search starts Once a programme is found the scanning stops and its name is displayed if available Go to the next step If you know the frequency of the required programme this can be entered directly using the 0 keys If no picture is found see Troubleshooting Tips on page 31 Q Program No Enter the required number with the 0 9 4 p keys Fine If the reception is not satisfactory adjust using the 4 keys
30. ed Rearrange services gt services This menu allows you to change the order of the stored digital channels and radio stations DIGITAL TV O From the digital mode press the key to display the setup menu O Use the v key to select Installation and press gt twice to select the Service lists menu Setu Installation Service lists ces Rearrange services Service setup View new TV channels Test reception Listen to new Radio stations e Manage service lists O O O OClose O Use the a Y keys to select Rearrange services and press gt key O Use the Y keys to select the channel you want to exchange O Press 9 to activate If you want to uninstall the selected channel press the red key O Select A Y the new channel number you want to exchange it with O Press key to confirm The exchange is done O Repeat the operations to until all the channels are in the required order O To return to previous menu press the 4 key DIGITAL TV Press the key to exit the menu 12 View or Listen to new services This menu allows you to check the availability Use the A Y keys to select View new TV of new TV channels or new radio stations that channels or Listen to new Radio station have been launched by the broadcaster after If new services are availables press gt to the initial installation aay enter into the list and use the A Y keys to O From the dig
31. ett Weight with stand 13 3 kg 19 kg 25 kg 35 Table of TV frequencies Frequenztabelle der Fernsehsender Liste des fr quences TV Frequentietabel TV Zenders Tabella delle frequenze TV Lista de frecuencias TV Lista das frequ ncias TV Liste over TV senderne Tabell over TV frekvenser Tabell ver TV frekvenser TV taajuustaulukko Kat Aoyog GUXVOT TWV rroprrov televizi ad llom sok frekvenci inak a list ja Lista cz stotliwo ci stacji nadawczych Seznam frekven n ch p sem vys la Zoznam frekven n ch p siem vysiela ov EUROPE FRANCE CANAL FREQ MHz CANAL FREQ MHz CANAL FREQ MHz CANAL 5 oe E2 515 33 4 63 75 S16 34 5 176 0 E4 517 5 6 184 0 5 175 S18 36 7 192 0 E6 182 519 37 8 200 0 E7 189 S20 38 9 208 0 EB 196 H1 39 10 E9 203 H2 40 B E10 210 H3 41 11 217 H4 42 D E12 224 H5 43 E R1 44 F R2 45 G R3 46 H R4 47 li R5 48 J R6 49 K R7 50 TN R8 51 M R9 52 N R10 53 R11 54 P R12 55 Q S1 56 52 57 Sa 20 ITALY EEN 60 CANALE FREQ MHz Se 61 A 53 75 S7 62 B S8 63 59 64 D 510 65 511 66 F S12 67 G S13 68 H S14 69 Hi Information for users in the UK not applicable outside the UK Positioning the TV Important For the best results choose
32. ey to exit the menu information gt This menu provides information about the software version and the installation of new software DIGITAL TV From the digital mode press the to display the setup menu Use the v key to select information and press gt key twice key Favourites e Preferences e Information Access restrictions e Installation System software Provide information on problem reports and installing new software O O O Close O The software version is displayed Use the key to enter the selection mode O Use the lt keys to select Yes or No mode You can activate the menu to automatically accept any software update of your digital TV Normally the product will detect if an update is available while it is in standby mode Next time the television is turned on a message will appear on the screen indicating new software is available Selecting the key activates the software download E The software download menu will give a description of the software together with the date and time of the download This may update certain menus functions or add new features but the general way in which the TV operate will not change Once accepted the download will take place at the designated time and date Note The TV must be put into standby when the download is due in order for it to take place Off Air Downloading of new software Whenever a new software is available it is advis
33. grammes or EXT sockets Note Programmes 0 to 40 have individual volume setting and programmes 41 and above share common setting AVL Automatic Volume Leveller this is used to limit sudden increases in sound especially on programme change or advertising slots Dolby Virtual To activate deactivate the surround sound effect You can also access these settings with the key Store this is used to store the sound settings 23 Using the PIP Picture in Picture Feature The PIP Picture in Picture feature allows you to call up a PIP screen of the PC Personal Computer or HD High Defintion device while watching a TV programme IMPORTANT To call up a PIP screen of the PC equipment the following step must be taken HDMI 1 or HDMI 2 input MUST be connected to the DVI output of the PC equipment Use a HDMI to DVI adaptor cable to do the connection To call up a PIP screen of the HD equipment the following steps must be taken HDMI 1 or HDMI 2 input MUST be connected to the HDMI output of the HD equipment NOTE While you are watching TV programmes you can only call up a PIP screen from only one source Go to the PIP menu and select HDMI See below on how to access the PIP menu Select HDMI 1 or HDMI 2 depending on connection 24 Accessing the PIP screen via the PIP menu Note This is only possible when PIP signal is detected 1 Press the Qem key to display main menu
34. he television is powered on for the first time it will always be in DIGITAL mode To receive TV channels your television is equipped with 2 tuners One is for digital channels the other is for analogue channels Use the key of the remote control to switch the TV between analogue and digital mode Use the P age or O to 9 keys to select channels Overview of Digital main menu and sub menus Q Use the key of the remote control to select Digital mode DIGITAL TV O From the digital mode press the key to display the setup menu Use the a Y lt P keys to navigate select and adjust menu items Setup Favourites List 1 Name Select TV channels Select Radio stations Add all services Remove all services List 2 Name Select TV channels Select Radio stations Add all services Remove all services List 3 Name Select TV channels Select Radio stations Add all services Remove all services List 4 Name Select TV channels Select Radio stations Add all services Remove all services Overview of Digital main menu and sub menus Setup Preferences Language Audio Subtitle Teletext Subtitling Mode Subtitles for hearing impaired System Location Country Time zone Digital Audio Output Information System software Current software version Always accept new software Access restrictions Set pin protection Maturity rating TV channels Radio stations Change pin code Type of Selection
35. ion of multimedia hypermedia information objects that are interchanged among applications and services using a variety of media The objects define the structure of a multimedia hypermedia presentation HDMI High Definition Multimedia Interface Provides an uncompressed all digital audio video interface between the TV and any HDMI equipped audio video component such as set top box DVD player and A V receiver HDMI supports enhanced or high definition video plus two channel digital audio System Television pictures are not broadcast in the same way in all countries There are different standards BG DK I and LL The System setting page 24 is used to select these different standards This is not to be confused with PAL or SECAM colour coding PAL is used in most countries in Europe SECAM in France Russia and most African countries The United States and Japan use a different system called NTSC HDCP High bandwidth Digital Content Protection HDCP encrypts the transmission of digital content between the video source or transmitter such as a computer DVD player or set top box and the digital display or receiver such as a monitor television or projector PCM Pulse Code Modulation is a common method of storing and transmitting uncompressed digital audio Since it is a generic format it can be read by most audio applications similar to the way a plain text file can be read by any word processing program PCM is used by
36. is connected Disconnect headphone connection Sound interference Electrical appliances Try switching off any electrical appliances for interference example hairdryer vacuum cleaner that are in use TV not responding Wrong polarity of batteries Check polarity of the batteries to remote control Flat batteries Try changing the batteries Occasional appearance Characteristic of liquid This symptom is not a problem The liquid crystal of red blue green crystal panel panel is built with very high precision technology and black spots on giving you the fine picture details Occasionally a few screen non active pixels may appear on the screen as a fixed point of red blue green or black Note that this does not affect the performance of the set Intermittent or HDCP see glossary Noise is displayed if the connected digital equipment s flickering picture on authentication failed DVD player or Set Top box HDCP authentication in HD mode failed Check user manual for the digital equipment you are connecting Use a standard HDMI to DVI cable No sound or picture but Set on standby mode Press the key on the remote control front panel red light is on 31 32 Troubleshooting Tips Tips Unable to understand the language on screen to operate set Wrong language selected accidently AV EXTERNAL or HD mode is selected Cannot access Install menu PC modes do not work Wrong
37. isy picture little dots on picture due to weak signal transmission select On option to activate feature AMET 8 8 Using the Sleeptimer Feature Sleep feature allows you to select a time period in which the set will switch to standby mode automatically upon reaching the selected time period Select Off option to deactivate feature O Press the key With the w key select Features and the gt key to enter the Features menu Use the 4 key to select a time period TV To return to previous menu press the key To exit the menu press the key time period 15 30 45 or 60 minutes OR 90 or 120 minutes OR 180 or 240 minutes NOTE During the last minute of a Sleep time setting an on screen countdown will be displayed Pressing any button on the remote control will cancel the Sleep feature eu E _ 1 This menu lets you use the TV set as an alarm 1 Press the key 2 With the v key select the Features menu then Timer Sleep to select an automatic standby period O Time enter the current time Note the time is updated automatically each time the TV set is switched on via the teletext information on programme 1 If this programme does not have teletext the update will not take place 22 Start Time enter the start time Stop Time enter the standby time 9 Program No enter the number of the programme for the wake up alarm O A
38. ital Still in Analogue mode Press the key to switch to Digital mode menu Some channels or no channels are found after channel scan TV antenna not properly connected to the digital equipment Antenna wall socket may be damaged Check connection of TV antenna to digital equipment Check condition of antenna wall socket and replace if antenna wall socket is damaged A DVI Digital Visual Interface A digital interface standard created by the Digital Display Working Group DDWG to convert analog signals into digital signals to accommodate both analog and digital monitors RGB signals These are the three video signals Red Green Blue which make up the picture Using these signals improves picture quality S VHS signals These are 2 separate Y C video signals from the S VHS and Hi 8 recording standards The luminance signals Y black and white and chrominance signals C colour are recorded separately on the tape This provides better picture quality than with standard video VHS and 8 mm where the Y C signals are combined to provide only one video signal NICAM sound Process by which digital sound can be transmitted 16 9 Refers to the ratio between the length and height of the screen Wide screen televisions have a ratio of 16 9 conventional screen TV sets have a ratio of 4 3 MHEG Multimedia and Hypermedia information coding Expert Group provides standards for the coded representat
39. ital mode press the key move through the list to display the setup menu To return to previous menu press the lt key DIGITALTV Use the v key to select Installation and Press the key to exit the menu press gt twice to select the Service lists menu Add new services new services DIGITAL TV This menu allows you to search for new TV O From the digital mode press the key to channels or radio stations that have been launched display the setup menu by the broadcaster after the initial installation Use the v key to select installation and press key 11 46 Select Service setup v and press gt key pstallati n Press to add new services and press Service lists Add new services key to activate the installation gt Service setup Reinstall all services The search begins and only new channels will be stored and added to the channel list menu Test reception The percentage of the installation that has been completed and the number of channels found is displayed When the search is completed press the key to accept the new services Install and manage services O O e O Close O To return to previous menu press the 4 key DIGITAL TV O Press the key to exit the menu Reinstall all services all services Use the v key to select installation and press gt key This menu allows you to reinstall all the digital TV channels and radio stations Paw Select Service setup v an
40. lect the audio sound language Subtitle Teletext to select the subtitle teletext language Subtitling mode off on or auto subtitle only displayed in case of original audio transmission Subtitles for hearing impaired to activate or deactivate the specific subtitle for hearing impaired if made available by the broadcaster System to select the menu language Location settings Country to select the country where you are located Time zone to select the time zone where you are located al Audio Output settings To select AC3 if the amplifier supports the Dolby Digital format or PCM MPEG if it does not support Dolby Digital format Note If you select AC3 sound you must have your TV connected to a Home Theatre System or amplifier In this mode no sound will be heard from the TV speakers only To return to previous menu press the lt key DIGITAL TV O Press the key to exit the menu 13 14 Access restrictions restrictions This menu allows you to setup the access restrictions of the digital channels 9 DIGITALTV From the digital mode press the to display the setup menu key Use the v key to select Access restriction and press p key O Press the gt key to enter into the Set pin code protection menu Access restrictions Set pin code protection eg e On Maturity rating TV channels Radio stations Change pin code Switch pin code protection on or of
41. n favourite list see page 14 Subtitle language use the A Y keys to temporarily change the language and confirm Audio language to temporarily change the audio sound language To permanently change the audio and subtitle languages use the Preferences menu p 13 Mode you can choose to only have radio stations TV channels or services without audio or video Remark for the UK only the TV list will contain both radio stations and TV channels Banner duration to select the duration for which the banner is visible Press the white OPTIONS key to exit the menu 15 16 guide guide The TV guide is an Electronic Programme Guide that provides you with a quick and easy way to view a complete list of digital programmes as you would in a newspaper or TV magazine You can navigate through the list of digital programmes and obtain detailed information on the programmes You can also program the TV to provide a digital channel to be recorded O From the digital mode press the key to display the TV guide 1 17 24 BBC 17 24 e Now Next Today Preset Service Now Next 1 BBC 2 BBC TWO 3 ITC Channel 3 4 Channel 4 SITZ 6 BBC CHOICE eio See It Saw Snooker Trisha Microsoap Ice Skating This morning Gmtv2 Oakie Doke Bodger amp Badger e ORecord O Record list OTop OClose OOptions This afternoon e A list of all the digital programmes in the currently selected
42. nable to access the Digital menu If you press the key the same message will appear when you change the channel when recording starts Record list green key this menu gives the list of recording schedules You can check modify delete or add a new schedule by using the cursor or coloured keys as indicated on the screen Top yellow key to go directly to the top of the list Close blue key to exit from the TV guide e Options white gt gt key with this menu you can select your favourite list mode or themes Themes are areas of interest you can for example decide to display only drama news movie O Press the 5 key if you want to display more information about the selected programme if available O Press the amp key to exit the menu Recording function function This feature enables you to record a digital channel while the TV is in standby mode You will still have to programme your video recorder If you wish to continue watching another digital channel after setting a timer you can do so by changing channels in the normal way IMPORTANT The video recorder must be connected to EXT2 SVHS2 Please note that it is NOT possible to record one digital channel and watch another digital channel at the same time You can however record a digital channel and watch an analogue channel on your TV or vice versa From the digital mode press the key to display the TV guide
43. ng the Smart Picture and Sound features Teletext Using the TV as PC monitor Using the TV in HD High Definition Mode Troubleshooting Tips Glossary Centre Frequencies Table in KHz Helpline Specifications ANALOGUE OY Recycling The packaging of this product is intended to be recycled Apply to the local authorities for correct disposal Disposal of your old product Your product is designed and manufactured with highly quality material and components which can be recycled and reused When this crossed out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002 976 EC Please inform yourself about the local seperate collection system for electrical and electronic products Please act according to your local rules and do not dispose of your old products with your normal household waste The correct disposal of your product will help prevent potential negative consequences for the environment and human health Safety Information 10 cm 10 cm LC Leave at least 10 cm around each side of the TV set to allow for proper ventilation Place the set on a stable level surface Never cover the ventilation slots of the TV with a cloth or other material It may cause overheating Do not insert anything in the ventilation holes If metal or something flammable is inserted in these holes it may result in fire or electric shock 10 cm Take care not to co
44. nnect too many equipment to the same mains socket as it may cause overloading resulting in fire or electric shock To prevent fire or shock hazard do not expose your TV to rain or moisture VJ x y Avoid placing your TV set under direct sunlight or heat Installation of the TV set on the wall should be carried out by qualified serviceman Improper and incorrect installation may render the set unsafe Lal Hi When cleaning the surface or the screen of the set wipe gently with absorbent cotton or cloth or other soft material like chamois Do not use too wet a cloth which is dripping with water Do not use acetone toulene or alcohol to clean the TV As a safety precaution unplug the power cord from the mains a Pull the power lead by the plug Do not pull on the power lead Do not use a poor fitting mains socket Insert the plug fully into the mains If it is loose it may cause arching and result in fire No naked flame sources lighted candles should be placed on the top of the set or near it As a safety precaution do not touch any part of the TV power lead or aerial lead during lightning storms Avoid placing vase filled with water on the TV Water spilled into the set could result in electric shock Do not operate set if water is spilled into it Have it checked immediately by a qualified serviceman Televison keys and connectors 26 32 TV PROGRAM
45. nnels and radio stations For example each member of your family can create his her own favourite list DIGITALTV From the digital mode press the key to display the setup menu Favourites 82 List 1 Preferences Information Access restrictions Installation Make changes to your lists of favourite services O O O O Close Press gt to enter into the favourites list menu You have the choice to create 4 different favourite lists Use the A v keys to select your Favourite list List 1 List 2 List 3 or List 4 and press gt key O Use the a keys to select a setting and press gt key to enter into the sub menu Name use the 4 keys to move around the name display area 16 characters and the P age keys to select the characters When the name has been entered press key to exit Select TV channels use the A Y keys to select your favourite TV channels and confirm with ox key Press 4 key to exit Select radio stations use the A Y keys to select your favourite radio station and confirm with key Press 4 key to exit Add all services press key if you want to add all the service into your favourite list Remove all services press key if you want to remove all the service from your favourite list To return to previous menu press the 4 key DIGITALTV O Press the Your favourite list can be selected via the options menu see next page k
46. s not transmitted Select another number Direct access to Coloured areas are displayed at the the items bottom of the screen The 4 colour e O keys are used to access the items or corresponding pages The coloured areas 1 flash when the item or the page is not yet available This returns you to the contents page usually page 100 O Contents o Sub page display Certain pages contain sub pages which are automatically displayed successively This key is used to stop or resume sub page display The indication E appears top left PHILIPS You can use the 4 keys to select previous or next sub page applicable to 37 42 TVs only 27 28 Double page teletext To activate or deactivate the double page teletext display mode The active page is displayed on the left and the following page is displayed on the right Press E if you want to hold a page i e the contents page The active page is then displayed on the right To return to normal mode B press the key Note This feature is not applicable to 377 42 TVs To display or hide the concealed information games solutions This allows you to display the top or bottom part of the page Pressing it again will return the page to normal size 9 Hidden B information O Enlarge a page o Favourite pages E E Os PHILIPS eeoe Instead of the standard coloured areas displayed at the bottom of the screen
47. set your adjustment and press ok key to exit for 5 seconds to display the message CAUTION if you select a wrong country the channel numbering will not be according to the standard for your country and you may not receive all services or nothing at all O Select Service Scan from the menu and Congratulations for selecting this Philips television press key to start the installation The Press OK to start enjoying your digital television service scan menu is displayed All the digital and analogue programmes are searched for and stored automatically When the search is complete the menu will indicate the number O Press the key on the remote control the of digital services and analogue programmes moment your prefered language is visible found on the screen The Setup menu is displayed O Press the key twice to start watching TV The television then displays the current program The installation is now complete Language ce English C e Espa ol eau Francais Italiano e Suomi Time Zone Service Scan NOTE If at some point of time you decide to reset to the factory default settings press and hold down the MENU key on the side of the TV set for 5 seconds A congratulation message will appear on screen Repeat steps 1 5as if this was the first time you have turned on the TV Set options and start a service scan o The Language corresponding Country and Time Zone is now preselected according
48. t like DVD player recorder VCR Decoder box which have scart connections Important In order to connect your decoder box please use EXT1 scart only TV Aerial socket Insert the aerial plug into the 75 TV antenna socket Side connections for connecting to devices like video camera or camcorder Also allows you to connect your headphone for your personal listening pleasure NOTE For more details on connections see CONNECTION GUIDE Remote Control keys Control keys Standby DIGITAL TV Po gt gt Y m r mn e MT J Z J r PHILPS The signal strength indicator shows the signal strength of the transmission of the programme you are watching To set the TV to standby mode To switch the TV set on again press O to O or the P age key Mode selector To activate the remote control in TV DVD or AUX mode see page 6 Cancel In digital mode it functions as an exit key for MHEG teletext when no coloured key links are available to exit teletext mode TV TV menu To display or edit from the analogue menus Cursor lt gt 4 v These 4 keys are used to move within the menu or to directly access the screen formats Analogue or Digital mode To switch the television between analogue and digital mode Volume To adjust the sound level Mute To disable or enable the sound Numeric
49. ur PC user manual on possible software upgrades to your graphics card Please note that this is not a defect of the TV set Troubleshooting Tips Below is a list of symptoms you may encounter with your TV Before you call for service make these simple checks Possible Causes What you should do No display on screen Faulty power supply Check whether power cord is properly connected TV s Power not turned into the mains socket and to your TV If there is still on no power disconnect plug Wait for 60 seconds and re insert plug Switch on TV again Press the key on the remote control Poor reception Faulty antenna connection Check antenna connection at rear of TV snowish picture and Weak transmission Try manually adjusting your picture refer to page 21 noise Wrong TV system Have you chosen the right TV system refer to page 21 No picture Faulty aerial and cable Check whether euroconnector cables or aerial sockets are properly connected Wrong source selected Check whether the source is correctly selected Press button to enter Source list and select the correct source No sound on Wrong TV system Check whether the correct TV system is selected certain channels refer to page 21 Zero volume level Try increasing volume Sound muted e Check that the mute st mode is not on If mute mode is on press the iK key to deactivate mute mode m Aim remote control directly at sensor on front of TV Headphone
50. ur retailer in order to verify the correct type 3 Refit the fuse cover In order to maintain conformity to the EMC directive the mains plug on this product must not be removed Connecting the aerial Fitt The aerial should be connected to the socket marked IM at the back of the set An inferior aerial is likely to result in a poor perhaps unstable picture with ghost images and lack of contrast Make shift loft or set top aerials are often inadequate Your dealer will know from experience the most suitable type for your locality Should you wish to use the set in conjunction with other equipment which connects to the aerial socket such as TV games or a video camera it is recommended that these be connected via a combiner unit to avoid repeated connection and disconnection of the aerial plug ing the stand if provided Use only the stand provided with the set making sure that the fixings are properly tightened A diagram showing how to assemble the stand is packed with the stand Never use a make shift stand or legs fixed with woodscrews PHILIPS Be responsible Respect copyrights Specifications are subject to change without notice Trademarks are the property of Koninklijke Philips Electronics N V or their respective owners 2005 Koninklijke Philips Electronics N V All rights reserved www philips com 3139 125 35742
51. use the digital teletext follow the instructions on screen 2 Depending on the service you can be asked to use the lt gt A Y cursor keys 0000 coloured keys Teletext On Off key and sometimes the O O numerical keys Note If no coloured key links are not available in the Digital Teletext to allow you to exit teletext mode use the key on the remote control to exit teletext mode When you have finished watching teletext select a different channel with P keys or follow the on screen instructions to return to picture When you switch to a digital channel with links to a telext service software is downloaded in the background to enable the teletext function You should wait for a while before you press key to allow the software download to complete If you press the key before the download is complete there will be a short delay before the teletext screen is displayed While navigating the digital teletext there is a short delay while the page downloads A prompt or message is often seen on the page to let you know the progress Analogue teletext in Digital mode Available in all countries If you see an icon TXT on a digital channel without digital telextext services it indicates Analogue Teletext is available in Digital mode key to access Analogue teletext To use Analogue Teletext functions see page 27 and 28 Using the Conditional Access Module CAM
52. y play With the a v key select Features and the p key to enter the Features menu Features Use the a Y keys to select PIP O Use the key to enter PIP menu PIP Size Use the A Y keys to select PIP menu items Use the 4 p A Y keys to access the PIP menu items make the following adjustments or options To exit the PIP screen select PIP Size followed by the Off option Definitions of PIP items oo o PIP Size Select your PIP size Off Small Medium Large and Side by Side Horizontal Move the PIP screen horizontally from left to right and vice versa Vertical Move the PIP screen vertically from top to bottom and vice versa HDMI If HDMI 1 or HDMI 2 are both connected you can only select one source HDMI 1 or HDMI 2 Accessing the PIP screen via the PIP key Note This is only possible when PIP signal is detected o Press the key on the remote control to display PIP screen A small PIP screen will appear on the TV screen O Press the key a second time to change the small PIP screen to a medium PIP screen size Press the O Press the key a third time to change the medium PIP screen to large PIP screen size O Press the key a fourth time to change the large PIP screen to a Side by Side a TV screen on one side and the PIP screen on the other side O Press the key a fifth time exit PIP screen NOTE For more details on connections to the PC and HD equipment see CONNECT
53. you can store 4 favourite pages on the first 40 channels which can then be accessed using the coloured keys red green yellow blue Once set these favourite pages will become the default every time teletext is selected TV 1 Press the key to change to favourite pages mode e Use the 9 keys to enter the teletext page that you want to store as a favourite page Press and hold the colour key of your choice for about 5 seconds The page is now stored Repeat steps 2 to 3 with the other coloured keys To exit favourite page mode press the O To exit teletext mode press the key iu NOTE To clear favourite pages press and hold qq key for about 5 seconds Using the TV as a PC Monitor NOTE PC connection is only available via HDMI DVI connector VGA connection is not supported Your TV can be used as a computer monitor IMPORTANT For the TV to function as PC monitor the following steps must be taken 0 HDMI 1 or HDMI 2 input MUST be connected to the DVI output of the PC Use a DVI to HDMI adaptor to do the connection O Press the key to display Source List and use the A Y key to select HDMI 1 or HDMI 2 ve key to switch to the selected source Source Using the PC menus w 1 Press the key to display the PC menu Use the A Y key to access the settings and the lt key to select or adjust setting the settings are automatically saved

Panasonic NN-H765 Microwave Oven User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents