Panasonic KX-T7050 IP Phone User Manual
Contents
1. should never be placed near or over a radiator or heat register This product should not be placed in a built in installation unless proper ventilation is provided Do not allow anything to rest on the telephone cord Do not locate this product where the cord will be abused by persons walking on it Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock Never spill liquid of any kind on the product To reduce the risk of electric shock do not disassemble this product but take it to a qualified serviceman when some service or repair work is required Opening or removing covers may expose you to dangerous voltages or other risks Incorrect reassembly can cause electric shock when the appliance is subsequently used 11 Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions A When the power supply cord or plug is damaged or frayed B If liquid has been spilled into the product C If the product has been exposed to rain or water D If the product does not operate normally by following the operating instructions Adjust only those controls that are covered by the operating instructions because im2. Panasonic Proprietary Telephone for Electronic Modular Switching System MODEL NO KX 17050 Reference Manual Illustrated Model White KX T7050 is compatible with all of the Panasonic Electronic Modular Switching Systems and can perform most functions within each system Please read before use Home Automation Systems Inc 800 SMART HOME 949 221 9200 http smarthome com Important Safety Instructions When using your telephone equipment basic safety precautions should always be followed to reduce the risk of fire electric shock and injury to persons including the following 1 Read and understand all instructions Follow all warnings and instructions marked on the product Unplug this product from the wall outlet before cleaning Do not use liquid cleaners or aerosol cleaners Use a damp cloth for cleaning Do not use this product near water for example near a bath tub wash bowl kitchen sink or laundry tub in a wet basement or near a swimming pool Do not place this product on an unstable cart stand or table The product may fall causing serious damage to the product Slots and openings in the cabinet and the back or bottom are provided for ventilation to protect it from overheating these openings must not be blocked or covered The openings should never be blocked by placing the product on the 8 10 bed sofa rug or other similar _ surface This product
3. ccess number and the phone number AUTO DIAL STORE Button and Indicator Used for dialing the system speed dialing For storing functions into memory CONFERENCE Button Used for speaking with three parties at the same time 4 MONITOR Button and Indicator Used for making a call without using the handset 42 HOLD Button Places a call on hold These functions are limited to the specified EMSS Control Units Refer to the Installation manual KX T7050 is compatible with the Panasonic Electronic Modular Switching Systems and can perform most functions within each system aie 8 Home Automation Systems Inc 800 SMART HOME 949 221 9200 hitp smarthome com Accessory order information Replacement parts and accessories are available through your local authorized parts distributor Part No i Picture Description Comment l KX JO7W B 7 feet X J15W B Handset cord 15 feet KX J25W B 25 feet Important information Keep the unit away from heating appliances and electrical noise generating devices such as fluorescent lamps and motors e The unit should be kept free of dust moisture and vibration and should not be exposed to direct sunlight Do not use benzine thinner or the like or any abrasive powder to clean the cabinet Wipe it with a soft cloth Do not use any handset other than Panasonic handset If there is any trouble disconnect the unit from the extension line and
4. ce pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful Interference In a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur Ina particular installation If this equipment does cause harmful Interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help
5. connect a known working phone If the known working phone operates properly have it repaired by one of the specified Panasonic Factory Service Centers If the known working phone does not operate properly check the Electronic Modular Switching System and the internal extension wiring 9 Home Automation Systems Inc 800 SMART HOME 949 221 9200 http smarthome com Important information won WARNING TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS PRODUCT TO RAIN OR ANY TYPE OF MOISTURE CAUTION To assure continued compliance with FCC rules do not make any unauthorized modifications When programming emergency numbers and or making test calls to emergency numbers 1 Remain on the line and briefly explain to the dispatcher the reason for the call before hanging up 2 Perform such activities in the off peak hours such as early morning hours or late evenings This telephone provides magnetic coupling to hearing aids INSTALLATION 1 Never install telephone wiring during a lightning storm 2 Never install telephone jacks in wet locations unless the jack Is specifically designed for wet locations 3 Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network Interface 4 Use caution when installing or modifying telephone lines NOTE This equipment has been tested and found to comply with the limits for a Class B digital devi
6. me level of the speaker volume MAX Loud voice MIN Low voice MEMORY Switch Set to SET For station programming set to PROGRAM eee To adjust the volume level of the handset Wall mounting This unit can be mounted on the wall phone plate Turn the handset hook upside down SE SS a f reel ES ES 3 Rotate the stand 1 2 turn so that the arrow on the stand shows UP for WALL Place the stand on the center of the unit Mount the unit on the wall phone plate To temporarily place the handset down during a conversation hook as shown 36 Home Automation Systems Inc 800 SMART HOME 949 221 9200 hitp smarthome com Location of controls HAVYBRID SYSTEM INTERCOM Button and Indicator Used for making or receiving an intercom call REDIAL Button Redials the last number dialed FLASH Button Used for sending the hook flash signal to the CO line Programmable Feature Buttons Dials or accesses the system feature with one touch Flexible CO Line Buttons and Indicators Used for dialing via CO line Direct Station Selection or Programmable Feature buttons Flexible Message Waiting Button and Indicator Used for Message Waiting Direct Station Selection or Programmable Feature button TRANSFER Button Transfers a call to any extension PAUSE Button Inserts a pause between the a
7. proper adjustment of other controls may result in damage and will often require extensive work by a qualified technician lo restore the product to normal operation 12 13 E If the product has been dropped or the cabinet has been damaged F If the product exhibits a distinct change in performance Avoid using a telephone other than a cordless type during an electrical storm There may be a remote risk of electric shock from lightning Do not use the telephone to report a gas leak in the vicinity of the leak SAVE THESE INSTRUCTIONS 2 Home Automation Systems Inc 800 SMART HOME 949 221 9200 hitp smarthome com Thank you for purchasing the Panasonic Telephone Table of Contents Important safety instructions Connection Initial setting Wall mounting Location of controls Accessory order information Important information igs o ON OO OH D Connection Connect as shown oy A Z ILD K TCin a To the EMSS control unit Included accessories Handset one Telephone line cord one one Home Automation Systems Inc 800 SMART HOME 949 221 9200 hitp smarthome com Initial setting VOLUME HANDSET MAX Sem MIN RINGER VOLUME TO HANDSET HANDSET VOLUME Selector NORMAL Normal voice HIGH Loud voice RINGER VOLUME Selector To adjust the volume level of the ringer HIGH Loud ringer LOW Low ringer OFF No ringer VOLUME Control To adjust the volu
Download Pdf Manuals
Related Search