Oregon Scientific IWA-80055 Clock User Manual
Contents
1. 2 seconds until the HOUR digit flashes 2 Press ADJ C F key to change its value 3 Repeat the above operations to set time and calendar in this order Hour gt Minute gt Second gt 12 24 Hr gt Year gt Month gt Date 4 Press MODE key to save and exit the setting mode or let it exit automatically 30 seconds later without pressing any key ALARM TIME SETTING In normal time mode press MODE key to enter the alarm time mode Press and hold MODE key for 2 seconds to enter the alarm time setting mode until the HOUR digit flashes Press ADJ C F key to change its value Repeat the above operations to set the alarm Minute a mae 5 Press MODE key to save and exit the setting mode or let it exit automatically 30 seconds later without pressing any key NOTE The alarm will be automatically turned on when you set the alarm time USING ALARM amp TEMPERATURE ALARM FUNCTIONS 1 Set the alarm time as described in the previous section 2 Press ALM ON OFF key once to turn on the alarm and snooze with the bell icon and snooze icon Zz displayed on the LCD 3 Press it twice to turn on the temperature alarm with the icon 3 displayed 4 Press it again to turn off all of them until the icons disappear NOTE 1 To activate the temperature alarm function ALARM must be on The temperature alarm can be turned on 30 minutes e2. DECLARE THAT THE PRODUCT IWA 80055 Remote Thermo Clock Product No Product Name is in conformity with Part 15 of the FCC Rules Operation is subject to the following two conditions This device may not cause harmful interference This device must accept any interference received including interference that may cause undesired operation N C Remote Thermo Clock IWA 80055 2008 Oregon Scientific All rights reserved
3. again to turn off all of them Press it to stop the current alarm when it is sounding 4 MODE Press it to switch between normal time mode and alarm time mode Press and hold it for 2 seconds to enter the time setting mode In setting mode press it to step the setting items 5 ADJ C F Press it to switch between Celsius and Fahrenheit In setting mode press it to change the setting values 6 MAX MIN Press it to check the minimum and maximum temperature records Press and hold it for 3 seconds to delete the maximum and minimum temperature records 7 RESET Press it to reset all values to default values In case of malfunction the unit may be required to reset 8 BATTERY COMPARTMENT Accommodates 3 AA size batteries 9 FIXED TABLE STAND Use it to stand the clock on the desktop TRANSMITTER 1 LED indicator Flashes when the remote unit transmits a reading 2 CHANNEL SLIDE SWITCH Assign the transmitter to Channel 1 2 or 3 NOTE The default and only effective channel for receiver is Channel 1 3 RESET Press it to restart the transmitter 4 BATTERY COMPARTMENT Requires 2 AA si
4. C8257 PD08423M Size A4 OreGon SCIENTIFIC WIRELESS THERMO CLOCK MODEL IWA 80055 USER S INSTRUCTIONS aps la Bes i 1238 ic cB MG NS e Thank you for your purchase of this wireless thermo clock The utmost care has gone into the design and manufacture of your clock Please read the instructions carefully and keep the manual for future reference The receiver unit has a clear easy to read display that shows the indoor outdoor temperature time date month and day of the week It is able to receive and display readings from the remote sensor The 433 MHz technology means no wire installation is required and you can place the sensor anywhere you like MAIN FEATURES ca i o f 000 000 000 000 000 000 00 400 RESET 1 SNOOZE LIGHT Press it to turn on the backlight for 5 seconds Press it to stop the current alarm when it is sounding 2 LCD display Displays the time date month day of the week indoor outdoor current temperature as well as the maximum and minimum indoor outdoor temperature 3 ALM ON OFF Press it once to turn on the Alarm and Snooze press it twice to turn on the Temperature Alarm press it
5. arlier than the alarm only when the transmitter s temperature is below 3 C 26 F Once the snooze function is turned on the 4 step crescendo alarm will sound 7 times in 5 minute interval The alarm duration is 60 seconds Enter the snooze mode press the ALM ON OFF D o m key to stop the alarm completely and exit the snooze mode Alarm and Snooze ON Temperature Alarm ON Alarm Temperature Alarm Snooze OFF ia m r 0 y D LI LIF LI LIF NF 4AIL IC IC 20 F 20 F 0 F mri Tir Fir IE LILI 0 IE IL E ILI a two Ho MD ewe Ho HU Cul H Ht HOW TO READ INDOOR AND OUTDOOR TEMPERATURE RECORDS Change the temperature unit to C for Celsius or F for Fahrenheit by pressing the ADJ C F key NOTE If no signals are received or the transmission is interfered will appear on the LCD 2 Relocate the clock or the transmitter in other positions and make sure the transmission is within the effective range of 100 feet approx 3 After several unsuccessful attempts to receive the temperature signal please remove the batteries from the sensor and main display unit and start the setup procedure again and decrease the distance between the sensor and main display unit CHECKING AND DELETING MAX MIN TEMPERATURE RECORDS 1 Press MAX MIN key once to check the maximum temperature records Press it twice to check the minimum records Press i
6. e equipment NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help DECLARATION OF CONFORMITY The following information is not to be used as contact for support or sales Please call our customer service number listed on our website at www oregonscientific com or on the warranty card for this product for all inquiries instead We Name Oregon Scientific Inc Address 19861 SW 95th Place Tualatin Oregon 97062 USA
7. t again to exit 2 Press and hold MAX MIN key for 3 seconds to delete the maximum and minimum temperature records MAX temperature record MIN temperature record w WY SI g1 H cf m 1 IE o 0e JRF Bet 2 28 Mo CEN LOW BATTERY INDICATOR When the LCD becomes dim replace with 3 AA size batteries at once while if the low battery indicator a appears on the LCD it indicates that the battery power of the transmitter is not enough and you should replace the batteries at once Transmitter s low battery indicator shows on the main unit hes Jp NOTE Attention Please dispose of used unit or batteries in an ecologically safe manner PLACING THE TRANSMITTER OUTSIDE The transmitter should be located in an area protected from direct sunlight and rain Place the sensor under a covered location like a roof overhand or under the eaves This will ensure accurate temperature readings The transmitter comes with a wall mounting desktop holder When mounting on a wall screw in place the holder using the top and bottom holes Then secure the transmitter in the holder The holder is also equipped with a table stand With the transmitter secured on the holder retract the leg on the rear of the holder and place on a flat surface SPECIFICATIONS MAIN UNIT 0 C to 45 C 32 F to 113 F Recommended operating range Resolu
8. tion 0 1 C above 10 C 1 C below 10 C 0 1 F 9 9 F 99 9 F 1 F above 100 F amp below 10 F REMOTE SENSOR 20 C to 55 C 4 F to 131 F Recommended operating range RF transmission frequency 433 MHz No of remote unit 1 unit RF transmission range maximum 100 feet Temperature sensing cycle around 60 64 seconds Power Main unit 4 5V use 3 x AA 1 5V alkaline battery Remote sensor 3 V use 2 x AA 1 5V alkaline battery Weight Main unit 8 57 oz Remote sensor 3 74 oz Dimension Main unit 3 78 W x 5 71 H x 2 20 D inch Remote sensor 1 57 W x 1 26 H x 0 94 D inch ABOUT OREGON SCIENTIFIC Visit our website www oregonscientific com to learn more about Oregon Scientific products If you re in the US and would like to contact our Customer Care department directly please visit wwwz2 oregonscientific com service support asp OR For international inquiries please visit wwwz2 oregonscientific com about international asp FCC STATEMENT This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation WARNING Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user s authority to operate th
9. ze batteries not included 5 BATTERY DOOR 6 WALL MOUNTING HOLDER Supports the transmitter in the wall mounting 7 TABLE STAND Use it to support the the sensor on a flat surface BEFORE USING THE TRANSMITTER 1 Remove the transmitter from the stand and open the battery door 2 Insert 2 AA size batteries into the battery compartment Make sure you insert them the right way according to the polarity information marked on the battery compartment Replace the battery door Channel 1 must be selected for this model ee NOTE Avoid placing the transmitter in direct sunlight rain or snow WEATHER STATION Remove the battery door and insert 3 AA size batteries into the battery compartment Make sure you insert them the right way according to the polarity information marked on the battery compartment Replace the battery door Press RESET key to restart the clock and it will synchronize with the transmitter automatically _ ai ted NOTE The building material and the position of receiver and transmitter affect the effective range So try various locations to obtain the best result Place the unit away from metal objects and electrical appliances to minimize the interference Position the receiver and transmitter within the effective transmission range 100 feet in usual circumstances TIME AND CALENDAR SETTING Y 1 In normal time mode press and hold MODE key for
Download Pdf Manuals
Related Search