Motorola H9 Bluetooth Headset User Manual
Contents
1. ALLS cowrinuep Function Toggle between two active calls Join a 3 way call Put an active call on hold or resume a call on hold Transfer a call from the phone to the headset Transfer a call from the headset to the phone Mute or unmute a call Action Press and hold the Call button until you hear a medium beep Press and hold both Volume buttons until you hear a medium beep Press and hold the Call button until you hear a medium beep Tap the Call button Press and hold the Call button until you hear a low beep Tap both Volume buttons Note Some features are phone network dependent AUDIO TONES conrinuep Audio Tone Single high tone Single medium tone Single low tone Single high tone repeated every 5 sec Two ascending tones Two descending tones Four ascending tones Four descending tones Headset Status Tapping Call button or both Volume buttons Pressing Call button or both Volume buttons for 1 2 sec Pressing and holding Call button or both Volume buttons for greater than 2 secs Phone network not available Mute enabled Mute disabled Headset powering on Headset powering oft MAKING CALLS cowrinuep Function Disable or enable the indicator light Action Press and hold both Volume buttons until you hear a low beep AUDIO TONES The audio tones provide information about your headset s status Audio Tone Single high tone when pressing Volu2. BEFORE Y Before using this product read the Important Safety anc Take a moment before you get started to tar Handstree Headset Along with your headse storage and on the go remote charging Buttons Speaker Eartip Button Indicator MOTOSTART lihi Get connected in 4 quick steps OU BEGIN 1 CHARGE Your Headset s Battery 1 Legal Information pamphlet and follow its instructions 1 Plug Motorola power supply into charger port on portable charger base The Charger Battery indicator light turns on Note If using a Dual Charging Adapter sold separately plug the Phone side of cable into the charger base Insert headset snugly into portable charger base Ihe Headset Battery Indicator light Q turns on niliarize yourself with your new H9 Bluetooth t a portable charger base is provided for both Headset Battery l ani p ug Charger _ ki z Battery Indicator When headset s battery is fully charged about 3 hours the Headset Battery indicator light turns off When headset is fully charged proceed to step 2 Do not remove the headset from the charger base until step 3 Note Once the headset is fully charged the charger base will continue to charge When fully charged about 6 5 hours the Charger Battery indicator light turns off START BLUETOOTH FEATURE Your Phone Your phone s Bluetooth feature is off by default To use your headset you must turn on the Blueto
3. e neste ght flashes To turn your headset off press and hold the Call button until the indicator light flashes rapidly and then turns off To conserve battery power store your headset in the included charger base IMPOR sure to first TC OOS WA AA ck Start Guide the reverse side a Call of this guide EA Button to complete initial setup of your HY EARTIPS AND YOUR INSTALLING EARTIP HEADSET When installing an eartip carefully place it onto the tip of the earpiece speaker Your H9 headset is supplied with multiple eartios The eartip is fitted onto the end of your headsets earpiece speaker and placed into your ear when using your headset D 1 Pull back largest flange on eartip 2 Twist eartip onto earpiece starting at an Flanged Tip angle and pushing onto headset Your headset s performance is greatly dependent upon achieving a good seal in your ear Therefore we recommend trying all the Supplied eartios with your headset To verify you are using the proper eartio you can leave yourself a voicemail and check for optimal ear seal to ensure good performance 3 Pull flange back to wearing position WEARING HEADSET CHANGING VOLUME To wear your headset insert the headset s BUTTON ORIENTATION earpiece speaker with installed eartip into your ear The eartio should form a comfortable seal You can also change the orientation of the in your ear volume buttons on your headset 1 Turn the headset
4. es to pair your headset with your phone Enter the passkey 0000 select OK When your headset successfully pairs and connects with your phone the Indicator light changes from steadily lit to flashing blue Note These steps are for most Motorola phones For other phones see your phone s user s guide 4 TEST AND USE Your phone and headset are now paired and ready to make and receive calls To make a call Place the headset in your ear The eartip should be inserted so that the headset feels comfortable and forms a seal in the ear Note See Eartips and Your Headset on the reverse side of this guide for more information on using eartips with your headset On the phone dial the number you want to call and press SEND key on your phone If your phone and headset are successfully paired you will hear ringing on the headset After you have successfully paired your phone and headset you don t need to repeat these steps For daily use ensure that your headset is turned ON and that your phone s Bluetooth feature is ON USING YOUR H9 see Features and Functions Guide on the reverse side for information on using your H9 USING YOUR PORTABLE CHARGER BASE The portable charger base provided with your headset can be used to cordlessly recharge your headset anywhere Once charged the portable charger base provides power on the go extending your talk time by constantly topping off your headset s ba
5. me button Five rapid high tones repeated every 20 sec No audio indications deteriorating quality Ring tone Single very high tone Headset Status Volume at minimum or maximum Low battery Out of range Incoming call All calls ended INDICATOR LIGHTS Indicator lights provide information about your headset and charger base status Charger Base Status Indicator Charger Battery On Charging 42 Flashing Battery low Off Headset Battery On Q Off Charging complete Charging Charging complete Headset Indicator Off On steady 10 rapid flashes Slow pulse Quick flash Status Power off Pairing mode Pairing successful Connected on a call Standby not on call Note After 5 minutes of inactivity the light stops flashing to conserve power but the headset remains in standby mode
6. oth feature in your phone For most Motorola phones at the main menu 1 Press CE Menu gt Settings gt Connection gt Bluetooth Link gt Setup scroll to Power select Change scroll to On Press Select to turn on the Bluetooth feature The Bluetooth feature remains on until you turn the feature off Note These steps are for most Motorola phones For other phones see your phone s user s guide Motorola Inc Consumer Advocacy Office 1307 East Algonquin Road schaumburg IL 60196 www hellomoto com 1 877 MOTOBLU 1 888 390 6456 TTY TDD United States for hearing impaired Guide Number 6809510A99 O 3 PAIR Your Headset Before you can use your headset you must pair link it with your phone Step A ENSURE HEADSET IS IN PAIRING MODE Power on headset by removing trom charger base The indicator light flashes to initiate easy pairing After a few moments the indicator light will be steadily lit in blue to indicate headset Is In pairing mode Indicator Light steadily blue A for pairing mode M y If the headset does not enter pairing mode see TROUBLESHOOTING for help 3 PAIR CONTINUED Your Phone Step B SET YOUR PHONE TO LOOK FOR YOUR HEADSET For most Motorola phones On your Motorola phone press Menu gt Settings gt Connection gt Bluetooth Link gt Handsfree gt Look for Devices The phone lists Bluetooth devices It finds select Motorola H9 select OK or Y
7. power off 2 Press both the Call button and Volume button you want to assign as the volume up button until the indicator A D light flashes twice J Ed Volume Buttons Call AUi Button Va Indicator Light European Union Directives MAKING CALLS Conformance Statement Function Action C T A E Ue Unle Make a voice dial call Tap the Call button product is in compliance with and speak the name e The essential requirements and after the tone other relevant provisions of Directive 1999 5 EC End a call Tap the Call button e All other relevant EU Directives Receive a Call Tap the Call button Reject a call Press and hold the IMEI 350034 40 394721 9 Call button until you C hear a medium beep Product Aaa Redial last call Press and hold the Call button until you The above gives an example of a typical Product hear a medium beep Approval Number Answer a second Press and hold the You can view your product s Declaration of Conformity incoming call Call button until you DoC to Directive 1999 5 EC to R amp TTE Directive at hear a medium beep www motorola com rtte To find your DoC enter the product Approval Number from your product s label in places first call on the Search bar on the web site hold Note Your H9 supports both Handsfree and Headset Profiles Accessing call functions depends upon which profile your phone supports See your phone s user s guide for more information MAKING C
8. ttery Using the included Motorola power supply you can charge both the portable charger base and headset at the same time The portable base charger provides two indicator lights for charging status See Indicator Lights in the reverse side of this guide for information on these indicator lights Note Using your PCs USB port as a power source for charging is not recommended TROUBLESHOOTING My headset will not enter pairing mode Make sure that any devices previously paired with the headset are turned off If the indicator light is not steadily lit in blue turn off both the other device and headset wait 10 seconds then turn headset back on Wait for the indicator light to become steadily lit in blue indicating the headset IS NOW in pairing mode My phone doesn t find my headset Make sure the indicator light on your headset is on lit in blue and steady when your phone is searching for devices see step 3 My headset worked before but now it s not working Make sure your phone is on and the Bluetooth feature is turned on in your phone see step 2 If the Bluetooth feature was turned off or was turned on only temporarily you may need to restart the Bluetooth feature see step 2 and pair your phone and headset again see step 3 Support If you need more help contact us at 1 877 MOTOBLU or visit us at www hellomoto com Bluetoothsupport Features and TURNING ON AND OFF Functions Guide he Cal ator ant n
Download Pdf Manuals
Related Search