Home

LG Electronics 660T Flat Panel Television User Manual

1. A 5 Approvals and Certification 00 A 5 UK Electricity at Work Regulation A 6 Environmental COM NAICS a A 9 ENERGY STAR 9 Environmental 9 5 2000 50504 a pra tone ic 9 Telecommunications Requirements ne A 10 European Fax Approvals and Certification A 10 FCC Regulations E ia A 11 Send Header Requirements A 11 Data Coupler Information sco e toe hoe oia A 11 Canadian Certification rta lionel A 13 Not available in all markets WorkCentre Pro 665 685 765 785 WorkCentre Pro 665 685 765 785 Introduction 1 Introduction Thank you for purchasing the Xerox Workcentre Pro The WorkCentre is designed for ease of use but to use your machine to its fullest potential take some time to read the User Documentation You will be ready to send and receive faxes and make copies with your machine as soon as you have read chapters 1 through 4 You can then refer to topics in the remaining documentation as needed Finding Information in the User s Guide The User s Guide contains the following sections Table of Contents Use the Table of Contents
2. Item Description Function 1 Display Displays the machine status and messages The display provides information about the current operation mode The machine has the following operating modes Standby Mode Communication Mode Menu Mode Copy Mode PC Printing Mode see Operation Modes later in this Chapter 2 PCLED Illuminates when a PC communication is in progress 3 Line 1 LED Illuminates when a fax communication is in progress on line 1 4 Line 2 LED Illuminates when a fax communication is in progress on line 2 5 The Menu key is used to access menu items listed in the menu map which are not available from the direct access keys The AN Menu key is also used as a navigation key for scrolling up a menu list 6 Delete Deletes the character at the position of the cursor C Used on International machines 7 Used to Exit a menu list Exit or 1 8 Left or Back navigation key used for going back to a previous menu list Also used for positioning the cursor for character delete or insert when you enter names 9 Down navigation key used for scrolling down a menu list 10 Right navigation key used for going to the next level of menus of the highlighted item Also used when you enter names for positioning the cursor for character delete or insert WorkCentre Pro 665 685 765 785 3 7 Machine Overview 3 8 Item Description Function 11 Ent Used to sel
3. A WARNING When programming emergency numbers and or making test calls to emergency numbers Remain on the line and briefly explain to the dispatcher the reason for the call before hanging up Perform such activities in the off peak hours such as early morning hours or late evenings Canadian Certification Notice The Industry Canada Label on the machine identifies certified equipment This certification means that the equipment meets certain telecommunications networks protective operational and safety requirements Industry Canada does not guarantee the equipment will operate to the user s satisfaction Before installing this equipment users should ensure that it is permissible to be connected to the facilities of the local telecommunications company The equipment must also be installed using an acceptable method of connection In some cases the company s inside wiring associated with a single line individual service may be extended by means of a certified connector assembly telephone extension cord The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier Any repairs or alterations made by the user to this equipment or equipment malfunctions may give the telecommunications company cause to request the user to disconnect the
4. Setting the Receive Footer A Receive Footer option is available which enables the WorkCentre to print a receive footer on each received page The Receive Footer displays the following information Footer Message Date Start Time Transmitting Station ID Receiving Station ID Page Number To set the Receive Footer 1 Press Menu 9900 Receive footer 1 On 2 Off Select the Receive Footer option To set the Receive Footer On press 1j To set the Receive Footer Off press Oley The menu selection screen redisplays Press Exit or Stop to return to the Standby Mode Please refer to your Menu Map WorkCentre Pro 665 685 765 785 4 9 Getting Started Loading Documents The Document Tray holds up to 50 documents for transmitting or copying Refer to the following size specifications for the range of documents that can reliably scan through the machine If a document does not meet these specifications make a copy on a copier using an accepted paper size then insert the copied image in the Document Tray Document Specifications The following table lists the sizes types and quantities of paper that can be loaded into the Document Feeder for copying or faxing Single Sheet Multiple Sheets Max Document 8 5 in W x 16 5 in L 8 5 in W x 16 5 in L Size 216mm W x 420mm L 216mm W x 420mm L Min Document 5 8 in W x 3 9 in L Same as singl
5. 2 2 Chapter 3 Machine 3 1 System OVSIVI Un 3 1 System io 3 2 Hardware ROQUES 3 4 Control PANG TTC c a iti 3 6 Control Panel Components and Function 3 7 Direct Access Function IKGys ciet paie a aa 3 11 TONES EE NOE 3 13 Operation Modes oa iii 3 14 Standby MIE 3 14 Communication Mode acciaio etam SE Spp QE acr ti SE poe rS 3 14 Copy MOG 6 ai 3 15 WorkCentre Pro 665 685 765 785 Menu Mode i 3 15 PC Printing Mode as 3 15 DecuLAN FaeMode sr renale 3 15 Types of CommunicationS deos er orien eto ad ie 3 16 cet xu EUREN 3 16 ROCOSO eund 3 18 Multi Access Communications 3 18 Multi Access Function Table Local 3 19 Multi Access Function Table Fax Communication 3 20 Multi Access Function Table PC 3 21 Chapter 4 Getting Started uisaii 4 1 Printing your Menu cruce ide ocaeca ein ease taketh 4 1 Setting the Machine Langu
6. WorkCentre Pro 665 685 765 785 Machine Overview Multi Access Function Table Local Local o 8 3 2nd Access t gt gt o o a 6 x x og 95 t t t O o5 crz tg gt gt O O Qe a SS 32 t5 2 w5 1st Access oo sol amp El amp sa c zs zo k t Single Copy Multi Copy Scan Multi Copy Print Print Report Manual 3 Print Report Auto 5 Print Transmission Report Mailbox Input X X X X X Mailbox Output x Print Received File Manual Print Received File Auto Direct Send X X X X X X Delayed Start X X X X X E Memory Send X X X X X Print Memory Transmission X X X X X 9 Report Receive to Printer X Receive to Memory X X X X X x X Data from PC o Data to PC PC Printing PC Scanning X X X X X X Not available when box type and number are the same WorkCentre Pro 665 685 765 785 3 19 Machine Overview Multi Access Function Table Fax Communication Fax Communication y n 2nd Access Direct Send Transmit Reservation Send Print Memor x Transmissio Report Receive to Printer to Memory 1st Access Single Copy Multi Copy Scan Multi Copy Print Print Report Manual Print Report Auto x Receive XXX
7. Local Print Transmission Report Mailbox Input Mailbox Output Print Received File Manual Print Received File Auto Direct Send Delayed Start Memory Send xix x x x x x x x x x x x x Memory X X lt Xx x Xx Print Memory Transmission Report Comm Receive to Printer Receive to Memory Data from PC Data to PC x K Xx XxX XI XI XXX PC PC Printing XXXI XXX Scanning Not available when box type and number are the same 3 20 WorkCentre Pro 665 685 765 785 Machine Overview Multi Access Function Table PC U 9 2nd Access Data from PC PC Printing PC Scanning Data to PC 1st Access Single Copy Multi Copy Scan Multi Copy Print Print Report Manual Print Report Auto Local Print Transmission Report Mailbox Input Mailbox Output Print Received File Manual Print Received File Auto Direct Send Delayed Start Memory Send XI XI XIXI X XI XXIX X X XI XI K K XIX X X XI XIX X X x lt Print Memory Transmission Report Comm Receive to Printer Receive to Memory X X X Data from PC Data to PC PC PC Printing PC Scanning Not available whe
8. 1HE England Tel 44 0 1707 353434 A 8 WorkCentre Pro 665 685 765 785 Safety Certification and Environmental Compliance Environmental Compliance ENERGY STAR Xerox Corporation designed this product to comply with the guidelines of the ENERGY STAR program of the Environmental os Protection Agency As an ENERGY STAR a Partner Xerox has determined that this product meets the ENERGY STAR guidelines for energy efficiency Low Power and Sleep Mode The Workcentre Pro 665 685 765 785 switch to a standby mode of operation when each task has been completed In this mode of operation the power consumption is less than the Sleep Mode energy efficiency limit required to satisfy energy start requirements The machine recovers from standby mode when any task is initiated within 20 seconds Environmental Choice 120v 60Hz products for Canada Terra Choice Environmental Services Inc of Canada has verified that this Xerox product conforms to all applicable Environmental Choice EcoLogo requirements for minimized impact on the environment SWISS ENERGY 2000 230V 50Hz Xerox Corporation has designed and tested this product to meet the energy restrictions required by Swiss Energy 2000 compliance has been notified to the registration authorities WorkCentre Pro 665 685 765 785 A 9 Safety Certification and Environmental Compliance Telecommunications Requirements Europ
9. for the information necessary to program each feature Several of the features accessed through the Direct Access Function Keys also use menu access For a complete overview of the programmable features refer to the Menu Flow Map in the System Administrator s Guide o n your CD ROM PC Printing Mode Using the ControlCentre software and appropriate printer drivers the WorkCentre can communicate with your PC to allow PC printing and programming of features DocuLAN Fax Mode When the optional DocuLAN Fax software is installed the LAN Mode is available through the connected PC WorkCentre Pro 665 685 765 785 3 15 Machine Overview Types of Communications 3 16 Transmissions Memory Send The job is first scanned into memory then sent to the remote party Using this method multiple jobs can be stored and the machine transmits each job as the line becomes available Direct Send The job is transmitted page by page without being stored in memory Using this method you can observe the transmission procedure one page at a time Speed Dialing This dialing method allows you to send a job to a programmed destination by entering the 3 digit Speed Dial number Alpha Dialing This dialing method allows you to send a job to a programmed destination by alphabetically searching the phonebooks for the remote name One Touch Dialing This dialing method allows you to send a job to a programmed des
10. reception described 3 18 polling transmission described 3 17 power saver mode described 3 3 print darkness setting the contrast 4 13 printing from a PC 3 1 phonebook reports 4 16 4 19 Priority Key described 3 12 priority send described 3 16 programming date and time 4 2 dial mode 4 7 language 4 1 machine ID 4 5 pulse dial mode 4 7 see also dial mode Q quick start 4 14 R receive footer enabling 4 9 receiving documents 4 14 paper jams 5 2 polling reception described 3 18 WorkCentre Pro 665 685 765 785 receptions types described 3 18 recording on plain paper 3 2 Redial Pause Key described 3 8 refuse junk mail described 3 3 3 18 relay operations described 3 17 reports see also individual report names Group Phonebook 4 19 One Touch Phonebook 4 20 Speed Dial Phonebook 4 18 requirements space 2 2 system 2 1 Resend Key described 3 12 reserved operations see also delayed operations resolution see also contrast changing 4 12 high resolution described 3 2 for scanning 4 12 selections 4 12 Resolution Key described 3 9 selecting the scan resolution 4 12 retrieving documents polling 3 17 Right Arrow Key described 3 7 right side cover described 3 4 5 safety certification 1 14 Canada A 13 CE marking A 5 European certification A 5 INDEX 5 fax approvals A 10 FCC regulations A 11 safety requirements ampere ratings A 2 building codes A 2 cleaning A 1 covers A 2 data coupler A 11 earth
11. to find topics easily Introduction Chapter 1 Describes the information in this User s Guide and System Administrator s Guide Machine Requirements Chapter 2 Describes the system and space requirements Machine Overview Chapter 3 Describes the system and hardware features of the machine and provides an overview of how the machine operates Each key on the Control Panel is described Getting Started Chapter 4 Includes the procedures for setting up the basic machine information such as date time language machine ID send header and receive footer Simple instructions to send receive print and copy are also provided WorkCentre Pro 665 685 765 785 1 1 Introduction Basic Troubleshooting Chapter 5 Guides the user through problem solving and recommended corrective actions Environment Specifications A Provides the safety data coupler and Canadian certification information Index Refer to the Index to locate specific information Information provided by the System Administrator s Guide SAG In addition the System Administrator s Guide contains the following sections Table of Contents Use the Table of Contents to find topics easily Introduction Chapter 1 Describes the information in this User s Guide and System Administrator s Guide Programming the Machine Chapter 2 Describes Menu Mode operation and the steps required to enter information when programming the m
12. 15 copying 4 14 preventing document jams 5 8 Cover Sheet Key described 3 12 covers right side cover described 3 4 D darken contrast 4 13 date setting 4 2 Delay Start Key described 3 12 delayed operations delayed start 3 16 Delete Key described 3 7 dial directory see also one touch directory speed dial numbers dial mode setting 4 7 Direct Access Function Keys described 3 11 3 12 Direct Send Key described 3 12 disabling receive footer 4 9 INDEX 2 send header 4 8 display see also LCD document feeder document specifications 4 10 document tray described 3 4 loading documents 4 10 document guides described 3 4 document jams 5 8 causes 5 8 clearing 5 8 paper types to avoid 4 10 document out tray described 3 4 document size 4 10 document tray described 3 4 loading documents 4 10 maximum documents 4 10 documents document jams 5 8 loading 4 10 4 11 specifications 4 10 types to avoid 4 10 Down Arrow Key described 3 7 drum assembly see also drum kit E enabling receive footer 4 9 send header 4 8 enriched system functions described 3 2 Enter Key described 3 8 environmental compliance A 1 A 14 ENERGY STAR A 9 Environmental Choice A 9 SWISS ENERGY 2000 A 9 extended tone 3 13 WorkCentre Pro 665 685 765 785 F fax communications see receiving documents retrieving doc uments transmitting fax headers setting 4 8 features hardware features listed 3 4 system features listed 3 2 3 3 fine reso
13. 3 Getting Started To display the date in the order of Day Month Year 2 digit press To display the date in the order of Year 2 digit Month Day press Month format 1 Numeric gt 2 Select the Month format To display the Month number press 1 To display the abbreviated Month name press 2 The menu selection screen redisplays Press Exit or Stop to return to the Standby Mode WorkCentre Pro 665 685 765 785 Getting Started Setting your Machine ID The Machine ID identifies your machine to the remote machine when they communicate The Machine ID must identify the person or company that sends the documents and appear on each transmitted page Note For assistance entering alpha or Special Characters refer to the System Administrator s Guide Note U S Regulations require that your fax transmittals include your name business or individual telephone number date and time To set your Machine ID 1 Press Menu kkk Machine ID Name 40 max Enter name After 2 seconds Name 40 max In some markets this feature must be set by your Xerox service representative Please refer to your Menu Map WorkCentre Pro 665 685 765 785 4 5 Getting Started Using the Keyboard and Numeric Keypad enter your identification name and press Enter Country code 1 Yes 2 No Note If 1 is selected the symbol is aut
14. 5 785 Getting Started Menu Map The Menu Map is a list of all machine features in a flow chart format Refer to System Administrator s Guide To print the Menu Map 1 Press Menu Map lt gt kkk or 2 The Menu Map prints then the machine returns to the Standby mode Please refer to your Menu Map WorkCentre Pro 665 685 765 785 4 15 Getting Started Phonebook Reports Individual Phonebook reports can be printed for Alphabet Speed Dial One Touch and Group stored in the WorkCentre You can also print Speed Dial One Touch and Group Phonebooks in a single operation by selecting All reports Note Refer to the individual report printing procedures for the report contents tables To print all Speed Dial One Touch and Group Phonebooks Reports 1 Press Phonebook 5 Phonebook 1 By name 2 Speed dials 3 Groups 14 One touch keys 5 All reports GSS Phonebook Report prints then the machine returns to the Standby Mode WorkCentre Pro 665 685 765 785 Getting Started By Name Phonebook The Alphabet Phonebook Reports prints a list of all Remote Station names assigned to Speed Dial numbers One Touch Keys and Groups in alphabetical order The following information is printed on the Alphabet Phonebook Report Item Description Name Names assigned to Speed Dial numbers One Touch Keys or Groups Location Number
15. 65 785 A 1 Safety Certification and Environmental Compliance A WARNING This product must be earthed This product is equipped with a 3 wire grounding type plug e g a plug having a third grounding pin This plug will fit only into a grounding type power outlet This is a safety feature To avoid risk of electric shock contact your electrician to replace the receptacle if you are unable to insert the plug into the outlet Never us a grounding adapter plug to connect the copier to a power source receptacle that lacks a ground connection terminal This product should be operated from the type of power source indicated on the marking label If you are not sure of the type of power available consult your local power company Do not allow anything to rest on the power cord Do not locate the product where persons will step or trip on the cord Your equipment is equipped with an energy saving device to conserve power when the machine is not in use The machine may be left on continuously Slots and Openings in the cabinet and in the back and sides of the product are provided for ventilation To ensure reliable operation of the product and to protect it from overheating these openings must not be blocked or covered The product should never be located near or over a radiator or heat register This product should not be placed in a built in installation unless proper ventilation is provided Never push objects of any kind into the slots
16. Copy Used to copy documents 21 Manual Used to create a one time group of phone Group numbers for Group Sending or Polling Speed O dial and one touch numbers can be used 22 Reduce Copies Used to set the copy reduction The following settings are available b 100 Auto Fit 86 75 50 23 Bedini Used to set the resolution for copying scanning or faxing The following settings are available Standard no LED lit fax only Fine Superfine Photo Fine and Photo Superfine 24 Sets the contrast of the printout to Normal no LED lit Lighten or Darken This is a scanner C setting affecting send and copy 25 id Deletes pending and active jobs You must SOR select the appropriate job type to display the desired job for cancellation Once the job is displayed pressing Cancel Job again displays the Cancel Job Confirmation screen When used in conjunction with the Job Status key active jobs can be canceled quickly by pressing this key then confirming the cancellation 26 This feature turns power off to minimize power Power Save consumption if the machine has not been used for a period of time C e Used on International machines WorkCentre Pro 665 685 765 785 3 9 Machine Overview 3 10 Item Description Function 27 Job Status Sa Displays the active job if a communication is in progress If there are no communications in progress a summary of the Pending Jobs is displayed Us
17. ED is not illuminated the Contrast setting is Normal The Contrast setting adjusts the print darkness of the copy or transmitted document The default contrast setting is normal on base machine The machine returns to the default setting after each transmission Refer to the System Administrator s Guide for details about changing the default setting for contrast The following table describes the available contrast selections Contrast selection Description Normal For documents printed with ordinary image density Selected when the Contrast LED is off Lighten For documents with dark print that need to be adjusted to print lighter Darken For documents with light or faint print that need to be adjusted to print darker WorkCentre Pro 665 685 765 785 4 13 Getting Started Quick Start To Receive The default answer mode is Auto answer When the remote party calls to send you a document your WorkCentre automatically receives and prints the document To Send 1 Loada document face down in the Document Tray 2 Using the Numeric Keypad enter the telephone number of the remote fax 3 Press Start To Copy Load a document face down in the Document Tray 2 Press Copy 3 Enter the number of copies 4 Press Start To Print From your PC application please refer to the printer setting in your System Administrator s Guide WorkCentre Pro 665 685 76
18. NG Shielded cables must be used with this equipment to maintain compliance with FCC regulations WorkCentre Pro 665 685 765 785 Safety Certification and Environmental Compliance Unique European Certification Approvals and Certification The CE marking applied to this product symbolizes Xerox Limited Declaration of Conformity with the following applicable Directives of the European Union as of the dates indicated January 1 1995 Council Directive 73 23 EEC amended by Council Directive 93 68 EEC approximation of the laws of the member states related to low voltage equipment January 1 1996 Council Directive 89 336 EEC approximation of the laws of the member states related to electromagnetic compatibility March 9 2000 Council Directive 99 5 EEC approximation of the laws of the member states related to R amp TTE A full declaration defining the relevant directives and referenced standards can be obtained from your Xerox Limited representative or by contacting Xerox Limited Environment Health and Safety Xerox Limited Technical Centre PO Box 17 Bessemer Road Welwyn Garden City Herts AL7 1HE England Tel Number 44 0 1707 353434 WARNING This product is certified manufactured and tested in compliance with strict safety and radio frequency interference regulations Any unauthorized alteration which includes the addition of new functions or the connection of external devices may impact this cert
19. REN If requested provide this information to your telephone company The REN is useful to determine the quantity of devices you may connect to your telephone line and still have all of those devices ring when your number is called In most but not all areas the sum of the RENS of all devices should not exceed five 5 0 To be certain of the number of devices you may connect to your line as determined by the REN you should call your local telephone company to determine the maximum REN for your calling area A WARNING Ask your local telephone company for the modular jack type installed on your line Connecting this machine to an unauthorized jack can severely damage telephone company equipment You not Xerox assume all WorkCentre Pro 665 685 765 785 A 11 Safety Certification and Environmental Compliance responsibility and or liability for any damage caused by the connection of this machine to an unauthorized jack You may safely connect the machine to the following standard modular jack USOC RJ 11C Use the standard line cord with modular plugs provided with the installation kit to connect it An FCC compliant telephone cord and modular plug is provided with this equipment This equipment is designed to be connected to the telephone network or premises wiring using a compatible modular jack which is Part 68 compliant Do not connect this machine to a party or coin operated phone line Repairs to the machine should be
20. XEROX Workcentre Pro 665 685 765 785 User s Guide Xerox Limited Global knowledge and Language Services Enterprise Centre Bessemer Road WELWYN GARDEN CITY AL7 1HL United Kingdom 1999 by Xerox Corporation All rights reserved Xerox Xerox Limited and all the products mentioned in this publication are trademarks of Xerox Corporation and Xerox Limited Products and trademarks of other companies are also acknowledged Copyright protection claimed includes all forms and matters of copyrightable material and information now allowed by statutory or judicial law or hereinafter granted including without limitation material generated from the software programs which are displayed on the screen such as icons screen display looks etc Changes are periodically made to the document Revisions changes any technical inaccuracies and typographical errors will be corrected in any subsequent editions Table of Contents Chapter 1 Introductioni s uciiiiii iaia 1 1 Finding Information in the User s Guide 1 1 Information provided by the System Administrator s Guide SAG 1 2 Document Conventions rd ds 1 5 Notes Cautions and 05 1 6 Chapter 2 Machine RequirementS rrnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnen 2 1 System Regilrermetlls alia 2 1 Space Requirements
21. Y PERSONS WHO POSSESS THE RELEVANT SKILL KNOWLEDGE AND EXPERIENCE TO CARRY OUT SUCH TESTS Please contact the Xerox Limited Customer Service Organization for further information WorkCentre Pro 665 685 765 785 A 7 Safety Certification and Environmental Compliance THE USE OF INAPPROPRIATE TEST PROCEDURES AND TEST EQUIPMENT MAY PROVIDE MISLEADING RESULTS AND MAY CAUSE DEATH PERSONAL INJURY AND OR DAMAGE TO PROPERTY QUESTION would like to carry out my own safety tests on the Xerox equipment in my premises ANSWER You may of course request such tests as you deem necessary to satisfy yourself that your Xerox equipment is safe Your Xerox Limited Customer Support will be pleased to advise you on such testing QUESTION require records of all tests ANSWER After safety testing your Xerox Limited Customer Service Engineer will provide you with a certificate which details the results of all tests completed In the event of any defect being noted the Xerox equipment will be switched off and disconnected from the supply until the defect has been corrected You will be advised of such action to enable such defects to be corrected PLEASE NOTE YOU MUST ENSURE THAT YOUR XEROX EQUIPMENT IS SAFE AT ALL TIMES Please contact us if you have any queries regarding the information provided in this document Xerox Limited Product Safety Xerox Limited Technical Centre PO Box 17 Bessemer Road Welwyn Garden City Herts AL7
22. achine Instructions for storing frequently dialed numbers are also provided Receiving Documents Chapter 3 Describes the Receive functions and instructs how to perform each function Dialing Methods Chapter 4 Describes the Dialing methods and instructs how to use each method Transmitting Documents Chapter 5 Describes the Transmit functions and instructs how to perform each function Cancelling Jobs Chapter 6 Provides the instructions for cancelling the various types of jobs WorkCentre Pro 665 685 765 785 Introduction Polling Chapter 7 Describes the Polling functions and instructs how to perform each function Mailbox Communications Chapter 8 Describes both the Xerox Mailbox system and the standard ITU T Mailbox system and instructs how to use the mailbox functions for each system Reports Chapter 9 Describes the reports and lists and instructs how to setup or print each report Copying Documents Chapter 10 Describes the Copy functions and instructs how to perform each function Scan Functionality Chapter 11 Describes the TWAIN settings PCL Printing Functionality Chapter 12 This option will be made available soon Network Functionality Chapter 13 This option will be made available soon Internet FAX Functionality Chapter 14 This option will be made available soon Control Centre and Web Control Centre Chapter 15 Describes how to use Control Centre and Web Control Ce
23. age ci n in 4 1 Setting the Date and sss alias ii 4 2 Setting your Machine st lola alare ue 4 5 Setlingiihe Dial Modefs cede os ir 4 7 Setting the Send Header 4 8 Setting the Receive Footer 000 4 9 L oading iDacumenis 4 10 Document 00 4 10 Selecting the Scan Resolution 440 404 111 4 12 Selecting the Scan ani 4 13 Q ick Stats ld tna 4 14 A A a 4 14 TOSE ae Ge 4 14 OO 4 14 A 4 14 Met MD it 4 15 ii WorkCentre Pro 665 685 765 785 Phonebook RepottS i 4 16 By Name Phonebook 4 17 Speed Dial PhonebDOOK cr Ee ico ces 4 18 ea 4 19 Touch PhonebOOK merase tii 4 20 Chapter 5 Basic Troubleshooting eese 5 1 Gallind f r SENGEN 5 1 Pre 5 1 Misia ei ali m 5 8 Bypass Tray Limitations senago idos 5 11 Chapter A Safety Certification and Environmental Compliance A 1 Laser Safety Informationen aaa A 3 Third Party Certification ii elia A 4 Radio Frequency Emissions USA A 4 Unique European
24. al Key described 3 11 tone dial mode 4 7 see also dial mode tones 3 13 top cover open button described 3 4 transmission features see transmitting transmitting see also dialing transmission features transmission types described 3 16 3 18 tray described 3 4 troubleshooting 5 1 5 11 document jams 5 8 paper jams 5 1 5 7 types of communications 3 16 3 18 WorkCentre Pro 665 685 765 785 INDEX 7
25. as a paper jam and cannot print the received documents the data is stored in memory As soon as the problem is corrected the documents are printed automatically Polling Reception Allows your machine to retrieve a document set up on a remote machine even when the remote machine is unattended Refuse Junk Mail This function prevents your machine from receiving documents from unknown parties Documents are only received from parties whose fax numbers are assigned Speed Dial or One Touch dialing numbers on your machine Collated Printing Incoming documents are stored in memory as they are received The documents are then printed last page to first page in order Reduce Receive When a document is received and it is longer than the copy paper this feature selects whether to reduce the document or divide the document into multiple pages Secure Receive When enabled the machine receives all documents into memory during the specified time The documents automatically print at the end of the specified time Multi Access Communications Using the built in memory as many as 100 operations can be programmed whilst other operations are being carried out for maximum equipment utilization and efficiency For example you can store a document to memory while the machine is receiving a document Refer to the Multi Access Function Tables that follow X indicates that the functions can be performed at the same time
26. dows Printer Driver installed on your PC and the parallel print cable attached to the parallel port the WorkCentre can be used to print from the PC Network printing is supported by installing an optional Network card DocuLAN Fax Using the optional DocuLAN Fax kit the Workcentre may be used on a Local Area Network Additional In box Software Please refer to the individual software packages for information regarding installation and usage WorkCentre Pro 665 685 765 785 Machine Overview Hardware Features Feature Description Document Output Tray Collects the document pages following a transmission or copy operation Contains an extension to support larger documents Control Panel Contains the keys to program system features or operate the machine Document Guides Guides the document pages into the scanner Transmission Cover Open Button Releases the Transmission Cover to clear a document jam Document Tray Supports the documents to be copied or transmitted Handset Connector Provides a jack for connecting the optional handset Telephone Connector Provides a standard modular jack for connecting a telephone Line Connector Lines 1 amp 2 A standard modular jack for connecting the phone line to line 1 or line 2 for fax communications Right Side Cover Allows access for clearing paper jams Top Cover Open Lever Release
27. e direction of the arrow Avoid tearing the paper Fuser Unit 068 069 5 6 WorkCentre Pro 665 685 765 785 Basic Troubleshooting 7 Install the Developer Assembly with the Drum Unit Place it in the machine press firmly on the green squares on the Drum Unit until the Drum Unit clicks into place Close the Right Side Cover then close the Top Cover Press down on the Top Cover until a click is heard to ensure the latches engage Top Cover 070 Right Side Cover WorkCentre Pro 665 685 765 785 5 7 Basic Troubleshooting Document Jam 5 8 If a document jam occurs during a transmission the message DOCUMENT JAM is displayed If this occurs follow the procedure below It is recommended that a duplicate from a copier of the jammed document be used to reduce the chance of a jam when resending the document See Chapter 4 Loading Documents for document specifications and recommendations which may help avoid paper jams Note The power can be left ON when clearing a paper jam Typical Causes of Document Jams Recommended Procedure The document is fed at an angle Adjust the Document Guides to the edges of the document The document paper is too thin or too thick Make a duplicate using a copier and use the copy as the sending document Document has tape or pieces of paper taped to it Remove the tape or make a duplicate using a copier and use t
28. e returns to the default setting after each transaction Refer to the System Administrator s Guide for details about changing the default setting for resolution The following table describes the available resolution selections Resolution selection Description Standard Use for sending normal text and graphics Selected when the Resolution LED is off Fine Use for documents with small characters newspaper print etc Superfine Use for documents containing very detailed print Photo Fine Use for photos or documents with colors or shading with low contrast images Photo Superfine Use for very detailed photos or documents with colors or shading with high contrast images If you choose a resolution and the receiving machine does not have an equivalent the WorkCentre chooses the next highest resolution compatible with the remote machine If you do not know the remote machines resolution capability it is recommended that you use the Direct Send mode when Superfine Photo is selected In Direct Send mode the WorkCentre determines the receive resolution prior to scanning the document The document is then scanned at the compatible receiver resolution resulting in better print quality WorkCentre Pro 665 685 765 785 Getting Started Selecting the Scan Contrast To select the Scan Contrast Press the Contrast key until the required contrast mode is indicated by a Contrast LED Note When a Contrast L
29. e sheet Size 148mm W x 100mm L Effective 8 5 inches Same as single sheet Scanning Width 216 mm Max capacity of N A 50 sheets Letter A4 size the Document Feeder 20 sheets Legal size Weight of Paper 45 g m to 120 g m 50 g m to 100 g m Stock 14 lbs to 32 Ibs 14 lbs to 28 lbs Avoid the following types of documents which can cause jams e Torn wrinkled curled or folded sheets e Sheets with punched holes Transparencies Sheets with paper notes attached Coated or shiny sheets Carbon or carbon backed sheets WorkCentre Pro 665 685 765 785 Getting Started To load documents Load the document face down in the document tray Adjust the document guide to fit the width of the document Angle the stack to optimize feeding performance To cancel a document in the ADF press Stop Document 062 WorkCentre Pro 665 685 765 785 4 11 Getting Started Selecting the Scan Resolution The Resolution key selects the scan mode for copying transmitting or storing a document in memory The scan resolution can be set to one of five settings based on the type of image you are scanning To select the Scan Resolution Press the Resolution key until the required resolution mode is indicated by the Resolution LED Note When the resolution LED is not illuminated the Resolution setting is Standard The default resolution setting is standard only on the base machine The machin
30. ean Fax Approvals and Certification This Xerox product has been self certified by Xerox for pan European single terminal connection to the analogue public switched telephone network PSTN in accordance Directive 1999 5 EC The product has been designed to work with the national PSTNs and compatible PBXs of the following countries Austria Germany Luxembourg Sweden Belgium Greece Netherlands Switzerland Denmark Iceland Norway United Kingdom France Ireland Portugal Finland Italy Spain In the event of problems you should contact your local Xerox representative in the first instance The product has been tested against TBR21 To assist in the use and application of terminal equipment which complies with this standard the European Telecommunication Standards Institute ETSI has issued an advisory document EG 201 121 which contains notes and additional requirements to ensure network compatibility of TBR21 terminals The product has been designed against and is fully compliant with all of the relevant advisory notes contained in this document The product may be configured to be compatible with other country networks Please contact your Xerox representative if it needs to be reconnected to another country s network There are no user adjustable settings on this product NOTE Although this product can use either loop disconnect pulse or DTMF tone signalling it is recommended that it is set to use DTMF signalling DTMF signall
31. ect the displayed menu item to start a communication or to accept name and C number entries 12 insert Sets the insert mode allowing a character to be i inserted at the position of the cursor instead of x overwriting the character in the current position Used on International machines 13 Alarm LED Illuminates when an error occurs or when the machine is out of paper toner or drum 14 Numeric Used for numeric alphabetical or special Keypad character input for direct dialing directory dialing and menu item input 15 During on hook or off hook dialing this key is Redial used to redial the last number dialed Pressing 4 Redial Pause displays the jobs waiting to be redialed Pressing the Enter key forces an Pause immediate redial When entering a telephone number pressing this key enters a pause in the telephone number sequence 16 EE Used to access programmed Speed Dial 4 Alpha and or Groups Pressing this key initially C displays the phonebook menu 17 adi Starts a job that is ready for transmitting scanning or copying 18 Stops a Direct Send job and ejects the Stop document from the scanner Also used to clear an error message displayed on the display WorkCentre Pro 665 685 765 785 Machine Overview Item Description Function 19 Manual Used for interactive dialing Digits are dialed as Dial the key is pressed The line monitor automatically turns on 20
32. ed on International machines 28 One Touch Keys Used to select phone numbers that have been stored in memory 29 Flip Door Opening the flip door to the right enables to use the control panel as a keyboard to program the machine ID ID names for the phonebook Email addresses for Internet FAXT etc 30 Shift O Used to select one touch numbers form 35 to 68 and for case character changes on the letter keyboard 31 Email t O Used to program the Email addresses when programming the phonebook Pressing this key at transmission the Email address can be entered for Internet transmission 32 Alphabetic Keypad Used to enter alphabetic characters while programming the phonebooks etc More information can be found in the Chapter 2 of the System Administrator s Guide on your CD ROM 33 Int l or k e gt Used to enter alphabetic characters while programming the phonebooks etc More information can be found in the Chapter 2 of the System Administrator s Guide your CD ROM t Available as an optional upgrade WorkCentre Pro 665 685 765 785 Machine Overview Direct Access Function Keys The following table lists the 5 Direct Access Function Keys which are located in the left of the Control Panel The Direct Access Function Keys automate 14 of the most frequently used WorkCentre features Direct Access Funct
33. eleted Displays the menu to set up or modify the ITU T mailbox functions for communication to any compatible machine using ITU T standards for mailboxing o or 5 5 3 E 29 SE 9 MES z S 9 58 96 9 32 75 3 St x ind s x a 5 Prints out a menu listing with the menu address numbers WorkCentre Pro 665 685 765 785 Machine Overview Tones The WorkCentre generates tones to indicate the operational status of the machine Single short tone A confirmation tone A short tone sounds when a key is pressed or when an action completes successfully Extended tone Signifies an unsuccessful operation An extended tone two to five seconds occurs when a transaction does not complete normally The user must perform an action to continue a process Refer to the display messages in the System Administrator s Guide WorkCentre Pro 665 685 765 785 3 13 Machine Overview Operation Modes Standby Mode When the machine is in the Standby Mode the display indicates the machine status a prompt for the next operation or an error message The following information is displayed Date and time The year month day and time hour and minute are displayed Use the Menu Mode to set the date display sequence and the time format Standby Mode Status The Standby Mode Status indicates the machine activity If Ready is displayed the machine has completed the previous task and is
34. equipment Users should ensure for their own protection the electrical ground connections of the power utility telephone lines and internal metallic water pipe system if present are connected together This precaution may be particularly important in rural areas Q CAUTION Users should not attempt to make such connections themselves but should contact the appropriate electric inspection authority or electrician as appropriate WorkCentre Pro 665 685 765 785 A 13 Safety Certification and Environmental Compliance Notice The Ringer Equivalence Number REN assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5 This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of Industry Canada Cet appareil num rique est conforme aux limites d mission de bruits radio lectriques pour les appareils de classe A stipul es dans le R glement sur le brouillage radio lectrique du minist re des Industries du Canada WorkCentre Pro 665 685 765 785 Index A accessories see also options supplies Activity Key described 3 11 ADF see also document feeder document si
35. gned location s is dialed and the document is sent Speed Dialing 300 Numbers In addition to the 68 One Touch keys 300 3 digit speed dial numbers can be assigned to frequently called locations Direct Access Function Keys 14 Keys Fourteen of the most frequently used functions are assigned to keys located on the Access Panel Multi Access Communications Utilizing the built in memory as many as 100 operations can be programmed for maximum equipment utilization and efficiency For example you can store a document to memory while the machine is receiving a document High Resolution With a maximum resolution of 406 dots inch x 391 dots inch 16 dots mm x 15 4 lines mm and 256 levels of halftone expression precision drawings small size characters or photographs are copied sent and received clearly Enriched System Functions Various types of communications are available through enriched system functions such as Relay Group and Mailbox Communications Mailbox Systems Features ITU T industry standards mailbox communications Group Communications 50 groups This feature allows the transmission of a document to as many as 368 different remote locations with one operation sequence Not available on all models WorkCentre Pro 665 685 765 785 Machine Overview Feature Description Manual Group This feature allows the user to send a document to multiple rem
36. he copy as the sending document The Transmission Cover is not fully closed Close the Transmission Cover fully The document is stapled Remove the staple s or make a duplicate using a copier and use the copy as the sending document WorkCentre Pro 665 685 765 785 Basic Troubleshooting 1 Removeall documents from the Document Tray Remove Documents 071 2 Press the Transmission Cover Release Button to open the Transmission Cover Transmission Cover Control Panel Release Button 072 WorkCentre Pro 665 685 765 785 5 9 Basic Troubleshooting 3 Remove the document jam Remove any pieces of paper paper clips or staples that may have caused the jam Remove Paper 073 4 Close the Transmission Cover Ensure the latch engages Push here to close the Transmission Cover 5 Verify the display has returned to the Standby Mode 5 10 WorkCentre Pro 665 685 765 785 Basic Troubleshooting Bypass Tray Limitation You can load up to 100 sheets of paper 80gsm 20 lbs in the Bypass Tray You can print the following paper sizes from the Bypass Tray PC Print You can select any size of paper within the specification Copy You can select A4 Letter or Legal size paper Fax Reception and Report Print You cannot select the Bypass Tray WorkCentre Pro 665 685 765 785 5 11 Basic Troubleshooting 5 12 WorkCentre Pro 665 685 765 785 Safety Certification and En
37. ically prints the contents that were in memory See Chapter 4 Loading Documents for document specifications and recommendations which can help avoid paper jams Note The power can be left ON when clearing a paper jam 1 Remove any documents from the Document Tray Remove Documents 071 5 2 WorkCentre Pro 665 685 765 785 Basic Troubleshooting 2 Grasp the Top Cover Open Lever to open the Top Cover Top Cover Open Lever 023 Top Cover 3 Open the Right Side Cover and remove any jammed paper y Right Side Cover 064 WorkCentre Pro 665 685 765 785 5 3 Basic Troubleshooting Q CAUTION Always hold the Developer Assembly by the green handles Do not expose the green drum to light for more than 3 minutes Never expose it to direct sunlight or touch the green drum Damage or poor print quality may result 4 Remove the Developer Assembly with the Drum Unit Developer _ Assembly Drum Unit vis 5 4 WorkCentre Pro 665 685 765 785 Basic Troubleshooting 5 Pullup on the green Paper Feed Release Lever and remove jammed paper Avoid tearing the paper Paper Paper Feed Release Lever WorkCentre Pro 665 685 765 785 5 5 Basic Troubleshooting A WARNING The black colored fuser housing may be hot if the machine was in use prior to this paper jam 6 Ifthe paper is jammed partway through the Fuser Unit black colored housing remove the jammed paper in th
38. ification Please contact your local Xerox Limited representative for a list of approved accessories WorkCentre Pro 665 685 765 785 A 5 Safety Certification and Environmental Compliance WARNING In order to allow this product to operate in proximity to industrial Scientific and medical ISM equipment the external radiation from the ISM equipment may have to be limited or special mitigation measures taken WARNING This is a Class A product in a domestic environment this product may cause radio frequency interference in which case the user may be required to take adequate measures UK Electricity at Work Regulation The Electricity at Work Regulation 1989 came into force in England and Wales on the 1 April 1990 This 1989 Regulation places a duty on all employers and self employed persons to ensure the electrical system in their premises are constructed maintained and operated in such a manner as to prevent so far as reasonably practical danger This includes ensuring all electrical equipment connected to such electrical systems are safely constructed maintained and operated Xerox equipment have been designed to exacting safety standards They have all undergone a variety of stringent safety tests including earth bond insulation resistance and electrical strength tests Xerox Limited manufacturing plants have been awarded ISO 9000 quality certification and are subject to regular audits by the British Standards Institut
39. inal receiving stations The origination and relay stations must be ITU T relay communication compatible units Mailbox Communications The Mailbox feature allows you to store documents in memory on your machine or that of a remote machine with a Mailbox number Other remote parties can then access the document using the assigned Mailbox number The WorkCentre provides ITU T the standard mailbox system is used with compatible ITU T machines e Polling Transmission This feature allows you to load a document in your machine to be polled or received by a remote machine The remote party places the call e Secure Send This feature enables your machine to send the document only when the number dialled matches with the remote machines ID telephone number Sub address ITU T This feature allows you to communicate poll or send to a specified sub address on a network The WorkCentre uses the ITU T Mailbox number for the sub address WorkCentre Pro 665 685 765 785 3 17 Machine Overview 3 18 Receptions Auto Reception When this mode is active your machine automatically answers all incoming calls and automatically completes the communication Manual Reception This mode allows you to answer all incoming calls manually If the incoming call is a fax you can receive the incoming fax by pressing Start Memory Reception When the feature is enabled and your machine runs out of paper toner or h
40. ing A 2 energy saving A 2 extension cord A 2 fuser area A 3 grounding A 2 guards A 2 insurance requirements A 2 interlock switches A 2 laser safety A 3 location A 2 ozone A 3 power source A 2 radio frequency emissions A 4 send header A 11 telecommunications requirements A 10 A 14 UK electricity at work regulation A 6 ventilation A 2 warnings A 1 scan resolution changing 4 12 scanning setting the contrast 4 13 setting the resolution 4 12 secured send see also security described 3 17 send header enabling 4 8 sending documents 4 14 see also faxing transmitting sequential transmissions see batching setting contrast 4 13 INDEX 6 date and time 4 2 dial mode 4 7 language 4 1 machine ID 4 5 receive footer 4 9 resolution 4 12 send header 4 8 single tone 3 13 space requirements 2 2 specifications documents 4 10 speed dial keys see speed dial numbers speed dialing speed dial numbers phonebook 4 18 Speed Dial Phonebook 4 18 Speed Dial Alpha Group Key described 3 8 speed dialing described 3 2 3 16 Speed Dial Phonebook 4 18 standard resolution 4 12 standby mode 3 1 3 14 Start Key described 3 8 stations see also relay stations remote stations Stop Key described 3 8 store for resending described 3 17 super fine resolution 4 12 supplies see also accessories system features 3 2 3 3 listed 3 2 3 3 requirements 2 1 system menu system password 4 5 T time setting 4 2 WorkCentre Pro 665 685 765 785 Tone Di
41. ing information 12 01 1999 06 57 Ready Free memory Load document Through the Menu mode you can configure the standard machine settings or customize your machine Refer to Chapter 4 Getting Started for basic programming instructions and procedures for setting the standard machine settings For optimum performance the machine should be left on 24 hours a day While the machine is powered on the internal batteries are charged The primary battery retains the programmed data for up to 5 years if the machine loses power Document data stored in a machine with standard memory is retained for up to 72 hours during a power failure or power off where the image battery is fully charged for more than 8 hours prior to power off WorkCentre Pro 665 685 765 785 3 1 Machine Overview System Features The following table describes many of the WorkCentre features Refer to the Table of Contents or Index to locate detailed information Feature Description Copying on Plain Paper Dual Line Simultaneous Communications Plain paper is used for printer output thereby allowing the use of standard forms labels etc This machine enables the operation of two real time communication jobs at one time Alpha Dialing 418 numbers Dial the desired location by searching for the name in the Speed Dial One Touch and Group phonebooks One Touch Dialing 68 Keys With one key stroke the number of the assi
42. ing provides reliable and faster call set up Modification connection to external control software or to external control apparatus not authorised by Xerox will invalidate its certification WorkCentre Pro 665 685 765 785 Safety Certification and Environmental Compliance FCC Regulations Send Header Requirements Federal Communications Commission FCC regulations require all persons within the United States who send any message via a facsimile machine to include an identifying message in the transmission The message must clearly contain an identifier and telephone number for the entity business or individual sending the message This facsimile machine provides the local ID and name features required for the FCC regulation To satisfy the FCC regulation the telephone number and name must be included with the printed document To comply with the FCC rules carefully read and follow the instructions listed in this document to program the local ID and name Data Coupler Information This Xerox WorkCentre Pro 665 685 765 785 machine contains an internal data coupler Its use is restricted by the FCC Federal Communications Commission To comply with the FCC rules you must carefully read and follow the instructions listed below This equipment complies with Part 68 of the FCC rules On the rear of this equipment is a label that contains among other information the FCC registration number and Ringer Equivalence Number
43. ion Keys Refer to the Table of Contents to locate specific function information 060 3 Description Function Activity Prints a list of Transmission Communications Receive Communications or both Phonebook Prints a list of telephone facsimile numbers stored in memory Available reports include Alphabet Speed Dialing One Touch and Group Dialing numbers Confirm Sets the Confirmation report options for the current job being Faxed Polled or Broadcast DI Option to temporarily switch from pulse to tone dial DTMF WorkCentre Pro 665 685 765 785 Machine Overview 3 12 Description Function Allows entry of a Charge Code at the time of dialing or during phonebook programming Digits entered after this selection are concealed Allows entries of manual One Touch and Speed Dial numbers to be chained together for sequential dialing operations Allows a job to begin at a later time up to one month Allows you to select Line 1 or Line 2 for a communication Enables or disables the cover sheet option if the main menu cover sheet option is On If On is selected the To and From input is required Transmits the document directly from the scanner instead of scanning it into memory first Used to send the current job prior to any jobs reserved in memory Used to resend a job that exceeded the redialing count and has not been d
44. ion or equivalent national standards body Xerox equipment which has been properly and regularly serviced and maintained should not have to undergo additional specific safety tests pursuant to the 1989 Regulation Customers wishing to complete safety testing should contact Xerox Limited Technical Centre see page 1 for advice prior to any test implementation Xerox equipment should however be properly and regularly serviced and maintained at all times QUESTION What is the Electricity at Work Regulation ANSWER The Electricity at Work Regulation 1989 came into force in England and Wales on the 1 April 1990 This 1989 Regulation places a duty on all employers and self employed persons to ensure the electrical systems in their premises are constructed maintained and operated in such a manner as to prevent so far as reasonably WorkCentre Pro 665 685 765 785 Safety Certification and Environmental Compliance practicable danger This includes ensuring all electrical products connected to such electrical systems are safely constructed maintained and operated QUESTION Does Xerox Limited comply with the Electricity at Work Regulation ANSWER The regulation places a duty on all employers and self employed persons to ensure the electrical systems in their premises are effectively safe The regulation does not impose on amongst others manufacturers or suppliers of such electrical systems However rest assured that all Xerox eq
45. ird Party Certification The Xerox WorkCentre Pro 665 685 765 785 is certified by various bodies in compliance with national and international safety standards 120v 60Hz Nominal Markets Underwriter Laboratories Inc UL 1950 Third Party Edition Within reciprocity agreements which include requirements for Canada 230v 50 Hz Nominal Markets 60950 60950 1991 including amendments 1 2 and 4 Quality Standards product is manufactured under a registered 1509002 quality system Radio Frequency Emissions USA This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when this equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy if not installed and used in accordance with the instructions may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense Changes or modifications to this equipment not specifically approved by the Xerox Corporation may void the users authority to operate this equipment Shielded cables must be used with this equipment to maintain compliance with FCC regulations WARNI
46. lution 4 12 footer enabling 4 9 function keys described 3 7 3 12 fuser cleaner see also process unit G group dialing described 3 2 3 17 group phonebook 4 19 Manual Group Key 3 9 Group Phonebook 4 19 H halftone see photographs resolution hardware features 3 4 listed 3 4 header enabling 4 8 ID setting the machine ID 4 5 idle mode 3 1 see also standby mode Insert Key described 3 8 installation instructions space requirements 2 2 system requirements 2 1 WorkCentre Pro 665 685 765 785 J Job Status Key described 3 10 junk mail described 3 3 3 18 K keypad dialing described 3 16 keys direct access function keys 3 11 3 12 function keys 3 7 3 12 L language setting 4 1 laser safety A 3 LCD communication mode 3 14 described 3 7 menu mode 3 15 standby mode 3 14 LEDs alarm lights described 3 8 communications lights described 3 7 Left Arrow Key described 3 7 lighten contrast 4 13 liquid crystal display see also LCD lists see also reports group numbers 4 19 phonebook reports 4 16 4 19 loading documents 4 10 4 11 machine hardware features 3 4 3 5 overview 3 1 system features 3 2 3 3 tones 3 13 INDEX 3 machine ID setting 4 5 machine language setting 4 1 mail refuse junk mail described 3 3 mailbox communications described 3 2 3 17 Mailbox ITU T Key described 3 12 Manual Dial Key described 3 9 Manual Group Key described 3 9 manual receive mode described 3 18 maximum documen
47. made only by a Xerox representative or an authorized Xerox service agency This applies at any time during or after the service warranty period If unauthorized repair is performed the remainder of the warranty period is null and void If you find the telephone line is damaged or the telephone company notifies you that your machine is causing damage disconnect the machine from the telephone line and call for service Do not reconnect the machine until necessary repairs are made The telephone company will where practical notify you when they need to temporarily disconnect service However if action is reasonable and necessary but prior notice is not practical they may still temporarily disconnect your service In such cases they must Immediately notify you of their temporary action Reconnect service when the source of damage is removed Inform you of your rights to bring a complaint to the FCC under FCC rules The telephone company may make changes to its communications facilities equipment operations or procedures Such action must be reasonable required in the operation of their business and consistent with FCC rules They must give you prior written notification if the changes can Make your machine incompatible with their equipment Require modification or alteration of the machine Otherwise physically affect performance of the machine WorkCentre Pro 665 685 765 785 Safety Certification and Environmental Compliance
48. n box type and number are the same WorkCentre Pro 665 685 765 785 3 21 Machine Overview 3 22 WorkCentre Pro 665 685 765 785 Getting Started 4 Getting Started This chapter contains step by step procedures to program the basic machine settings and set up the most commonly used facsimile features To get you started quickly basic steps to send receive and copy a document are also provided For additional setup functions refer to the appropriate SAG chapter Printing your Menu Map The Menu Map is a list of all machine features in a flow chart format Refer to System Administrator s Guide To print the Menu Map 1 Press Menu Map The Menu Map prints then the machine returns to the Standby mode Setting the Machine Language The WorkCentre is capable of displaying and printing in various languages Note Available Languages may vary depending on your location If not available Not Allowed Now will display To change the machine language 1 Press 5 9 Q Please refer to your Menu Map kkk WorkCentre Pro 665 685 765 785 4 1 Getting Started 1 XXXXX 2 3 XXXXX 4 XXXXX 2 Use the Numeric Keypad to select the desired language then press Enter The menu selection screen redisplays Press Stop to return to the Standby Mode Setting the Date and Time The WorkCentre shows the date and time in the display when in the Standby Mode The date and
49. ndby Mode 4 20 WorkCentre Pro 665 685 765 785 Basic Troubleshooting 5 Basic Troubleshooting Calling for Service Paper Jam If you have an error with the machine which you are unable correct using this troubleshooting section here or using System Administrator s Guide on the CD ROM please contact the customer Support Center Before calling please have the serial number of the machine available and any messages that are displayed Contact the support centre at the following telephone number USA 1 800 821 2797 Canada 1 800 939 3768 Europe Refer to the Warranty Pack provided with your machine for your support centre telephone number South America and the rest of the world Please contact your local service provider If a paper jam occurs during a reception or copying operation the message PAPER JAM XX is displayed If this occurs follow the procedure below The code number XX indicates the location where the paper jam has occurred as shown in the table below Code Location 10 In the 1st Paper Tray 20 In the Optional 2nd Paper Tray 30 In the Optional 3rd Paper Tray 50 In the Optional Bypass Tray 80 In the paper feed area 90 In the paper exit area WorkCentre Pro 665 685 765 785 5 1 Basic Troubleshooting If a paper jam occurs during a reception the received documents are automatically stored in memory Once the paper jam is corrected the machine automat
50. ntre software to set up the WorkCentre Problem Solving Chapter 16 Guides the user through problem solving and provides a list of error codes messages and recommended corrective actions Ordering Supplies Appendix A Provides contact addresses and telephone numbers for ordering consumable supplies WorkCentre Pro 665 685 765 785 1 3 Introduction Maintaining the Product Appendix B Provides procedures to clean and maintain the machine Includes detailed procedures for replacing the consumables Product Data Sheet Appendix C Environmental Specifications Appendix D Provides the safety data coupler and Canadian certification information Index Refer to the Index to locate specific information 1 4 WorkCentre Pro 665 685 765 785 Introduction Document Conventions A document convention is simply a way of presenting information This section explains the conventions used in the Workcentre Pro User s Guide Many procedures require you to press a key to perform a function these keys appear in boldface type For example Press Start to send a fax When you use the Menu Mode you may have to press a series of keys before arriving at the desired menu The resulting screen message for each step appears next to the series of keys pressed For example The procedure to enable the Send Header would appear as follows To enable the send header 1 Press Menu S 2 9 9 Send header 1 In
51. of the product as they may touch dangerous voltage points or short out parts which could result in a fire or electric shock Never spill liquid of any kind on the product Never remove covers or guards that require a tool for removal unless directed to do so in a Xerox approved maintenance kit Never defeat interlock switches Machines are designed to restrict operator access to unsafe areas Covers guards and interlock switches are provided to ensure that the machine will not operate with covers opened Use of an extension cord with this product is not recommended or authorized Users should check building codes and insurance requirements if a properly earthed extension cord is to be used Ensure that the total ampere ratings of the products plugged into the WorkCentre Pro 665 685 765 785 Safety Certification and Environmental Compliance extension cord do not exceed the extension cord ampere rating Also make sure that the total amperage of all products plugged into the wall outlets does not exceed the outlet rating Do not put your hands into the fuser area located just inside the exit tray area as you may be burned Ozone This product produces ozone during normal operation The ozone produced is dependent on copy volume and is heavier than air Providing the correct environmental parameter as specified in the Xerox installation procedures ensure that concentration levels meet safe limits If you need additional safety inf
52. omatically displayed at the beginning of the fax telephone number indicating a Country Code can be entered If 2 is selected international communication can be entered manually when dialing 3 Select the Country Code option To enter a Country Code press 1 J To skip entering a Country Code press Machine ID Fax number 20 max Using the Numeric Keypad enter the machine telephone number then press Enter Note Press the Right arrow key to insert a space The menu selection screen redisplays Press Exit or Stop to return to the Standby Mode WorkCentre Pro 665 685 765 785 Getting Started Setting the Dial Mode Your machine must be set to the dialing mode compatible with your telephone line requirements The Dial Modes supported are tone and pulse Pulse is sometimes referred to as rotary dial If your machine is connected to a PBX system you may need to enter a number to access the outside telephone line To set the Dial Mode 1 Press 0 _ Dial mode 1 Tone 2 Pulse 2 Select the Dial Mode To select tone press 1 select pulse press 2 Note f you have the 2nd line hardware installed you will be prompted to select the Dial Mode for Line 2 Enter outside number Call number 10 max The menu selection screen redisplays Press Exit or Stop to return to the Standby Mode This feature not allowed in all markets Please
53. ormation concerning the copier or Xerox supplied materials you may call the following number Europe 44 0 1707 353434 USA 1800 928 6571 Laser Safety Information This equipment is certified as a Class 1 laser product under the U S Department of Health and Human Services DHHS Radiation Performance Standard according to the Radiation Control for Health and Safety Act of 1968 This means that the equipment does not produce hazardous laser radiation All laser light emitted inside the equipment is completely confined within protective housings when any part of the facsimile is opened This means that the facsimile is safe to use during normal operation and maintenance A WARNING Adjustment or performance of procedures other than those specified herein may result in hazardous laser exposure Only trained and qualified personnel may open covers or remove parts that are not explicitly shown and described in the WorkCentre Pro 635 645 657 User s Guide as being accessible to the operator The Center for Devices and Radiological Health CDRH of the U S Food and Drug Administration implemented regulations for laser products in 1976 These regulations apply to laser products WorkCentre Pro 665 685 765 785 A 3 Safety Certification and Environmental Compliance manufactured from August 1 1976 Compliance is mandatory for products marketed in the United States The Workcentre Pro is in compliance with the CDRH regulation Th
54. ote machines by simply pressing the Manual Group key and entering the telephone numbers Batching This feature automatically performs transmissions of multiple documents going to the same phone number Documents sent to the same location are transmitted with one phone call thus saving time and call connecting costs Refuse Junk mail With this feature selected your WorkCentre only receives from those remote units with phone numbers assigned to your Speed Dial or One Touch phonebooks Receive to Memory Automatically stores up to 100 received documents to available memory if the paper runs out or if a paper jam occurs Collated Fax With this feature selected incoming documents are received to memory and then printed last page first This feature stacks the document with page 1 on top Super Power Saver Mode This feature turns off areas of the machine which have a high power consumption Printer Power Saver Mode This feature turns off the printer fuser unit to reduce the power consumption Optional Accessories The WorkCentre can be optioned with up to two additional paper trays a bypass tray a handset PCL Printing Card and Network card ControlCentre ControlCentre is software package that can be loaded on a PC The ControlCentre software allows you to program most of the machine settings using the PC then write the settings to the WorkCentre PC Printing With the Win
55. ready to fax or copy If the Paper Tray becomes empty or open the Standby Mode Status is replaced with the Paper Tray status Free Memory The percentage of remaining memory available for storing documents is displayed If no memory is used 100 is displayed Load document Prompts you to load your document If a document is loaded in the ADF this text prompts you to dial or press copy Enter Depart code if dept code feature is enabled Communication Mode 3 14 Memory Send Memory send communications are performed in the background Direct Send The status of a Direct Send operation is displayed Communication results Results of a communication can be printed Refer to the System Administrator s Guide Communication error code The result of an error in a communication Refer to the System Administrator s Guide WorkCentre Pro 665 685 765 785 Machine Overview Copy Mode When the machine is in the Copy Mode the display informs about the machine status as the machine prints single or multiple copies of the document When in the copy mode the following information is displayed The displays indicates Copying Paper size Auto LT LG A4 Collate Feature Collate On Off Copies Menu Mode When the machine is in the Menu Mode the display indicates each programmable feature and the settings selected As you scroll through the menu the machine prompts you
56. refer to your Menu Map WorkCentre Pro 665 685 765 785 4 7 Getting Started Setting the Send Header With this feature enabled your Send Header information is printed at the top of each page you send When enabling the Send Header feature you can specify where the header is to be printed inside or outside the document data area If Inside is selected and sending data exists near the top edge of the paper the header information and data may overlap If Outside is selected the header information is printed at the top of the page and the document is printed below to avoid overlapping The following information is printed on the Send Header Date Start Time Transmitting Station ID department name amp telephone number Transmission Serial Number The machine automatically assigns a three digit number This number is used on confirmation reports or error reports Page Number Total Number of Pages Job or File Number To enable the Send Header 1 2 Press Menu kkk A Send header 1 Inside 2 Outside 3 Off Select where you want the fax header to be printed To print the header in the document area press 1 To print the header above the document area press 2 To not print a header press 3 The menu selection screen redisplays Press Exit or Stop to return to the Standby Mode Please refer to your Menu Map WorkCentre Pro 665 685 765 785 Getting Started
57. roup Phonebook Report Item Description Group Group number number Name Group name One Touch One Touch or Speed Dial numbers assigned to the group Speed Dial One Touch Keys Number SD Speed Dial numbers To print the Group Phonebook Report Phonebook The Group Phonebook Report prints then the machine returns to the Standby Mode 1 Press For more information on other reports available please refer to your System Administrator s Guide WorkCentre Pro 665 685 765 785 4 19 Getting Started One Touch Phonebook The One Touch Phonebook Report prints a list of all Remote Station dialing numbers assigned to One Touch Keys The following information is printed on the One Touch Phonebook Report Item Description One Touch One Touch key number number Name The remote name or the Speed Dial or Group name Operation assigned to a One Touch Key Speed Dial Speed Dial Group or Fax number assigned to a One Group Touch key indicates an alternate number Fax number SUB SEP or PWD indicates type of sub address Time Delay Start time MON Line monitoring On Off status BPS Communication speed x 1000 Report Confirmation report On Off status Line Line to be used 1 or 2 To print the One Touch Phonebook Report 1 Press Phonebook lt UY The One Touch Phonebook Report prints then the machine returns to the Sta
58. s of Speed Dial numbers One Touch Keys or Groups Fax Number Fax numbers assigned to Speed Dial numbers One Touch Keys or Groups indicates an alternate number SUB SEP PWD indicates a type of sub address To print the Alphabet Phonebook Report Phonebook The Alphabet Phonebook Report prints then the machine returns to the Standby Mode 1 Press WorkCentre Pro 665 685 765 785 4 17 Getting Started Speed Dial Phonebook The Speed Dial Phonebook Report prints a list of all Remote Station dialing numbers assigned to Speed Dial numbers The following information is printed on the Speed Dial Phonebook Report Item Description S D nbr Speed Dial number Name Remote ID Fax Number The number of the remote unit indicates an alternate number SUB SEP PWD indicates a type of sub address Time Delay Start time MON Line monitoring On Off status BPS Communication speed x 1000 Report Confirmation report On Off status Line Line to be used 1 or 2 To print the Speed Dial Phonebook Report Phonebook The Speed Dial Phonebook Report prints then the machine returns to the Standby Mode 1 Press WorkCentre Pro 665 685 765 785 Getting Started Group Phonebook The Group Phonebook Report prints a list of all One Touch or Speed dial numbers registered as Group Numbers The following information is printed on the G
59. s the Top Cover for accessing consumables or clearing a paper jam Paper Tray Supplies the cut sheet paper to the WorkCentre A paper size sensor is located in the paper tray assembly to automatically detect and use the proper paper size when in the receive mode Copy Output Tray Collects printed documents Power Switch Switches the WorkCentre power On Off Power Cord Supplies power to the machine Bi directional Parallel Connector IEEE 1284 compliant Connects the WorkCentre to PC Not available in all markets Not available on some models WorkCentre Pro 665 685 765 785 Machine Overview Workcentre Hardware Features Transmission Cover Top Cover Open Button Open Lever Document Tray Document Guides Document Output Tray Printed Output Tray Bi directional Control Parallel Connector Panel Paper Tray 001 Right Side Cover Power Cord Connector 056 Not available in all markets Not available on some models WorkCentre Pro 665 685 765 785 3 5 Machine Overview Control Panel 10 111213 15 16 059 060 1 060 2 WorkCentre Pro 665 685 765 785 Machine Overview Control Panel Components and Function Keys The Control Panel is used to program the features and to initiate communications The following figures and tables illustrate the Control Panel and describe each component
60. side 2 Outside 3 Off 2 Select where you want the fax header to be printed To print the header in the document area press 1 To print the header above the document area press 2 To not print a header press 3 3 menu selection screen redisplays Press Stop to return to the Standby Mode WorkCentre Pro 665 685 765 785 1 5 Introduction Notes Cautions and Warnings This manual uses notes cautions and warnings to emphasize information the reader needs Notes contain information that supplements the text Notes are emphasized with italics The following is an example of a note Note Notes are provided as additional information The following are examples of a caution and a warning Q CAUTION Do not touch the green drum surface Touching the drum could reduce the print quality A WARNING Do not touch the heater unit inside the machine The heater unit is hot while the machine is operating 1 6 WorkCentre Pro 665 685 765 785 Machine Requirements 2 Machine Requirements This chapter provides information on the system requirements and the space requirements System Requirements When choosing an installation location follow these guidelines Avoid dusty locations extreme heat humidity direct sunlight or areas subject to heavy vibration Avoid areas where interference from other electrical devices may be present Avoid using an AC outlet that shares
61. t size 4 10 memory paper jams 5 2 memory send described 3 16 Menu Key described 3 7 menu mode 3 1 3 15 menus see also menu map minimum document size 4 10 modes of operation 3 14 3 15 communication modes 3 14 copy mode 3 15 menu mode 3 15 PC printing mode 3 15 standby mode 3 14 multi access described 3 2 multi access communications 3 18 N normal contrast 4 13 Numeric Keypad described 3 8 INDEX 4 O off hook dialing described 3 16 one touch dialing see also one touch keys described 3 2 3 16 One Touch Phonebook 4 20 one touch directory see also one touch keys one touch keys see also one touch dialing speed dialing described 3 10 One Touch Phonebook 4 20 on hook dialing described 3 16 operation modes 3 14 3 15 communication mode 3 14 copy mode 3 15 menu mode 3 15 standby mode 3 14 operator control panel 3 6 3 12 see also control panel original documents see documents output tray document out tray described 3 4 overview 3 1 ozone filter see also process unit page numbers receive footer 4 9 send header 4 8 paper document specifications 4 10 paper jams 5 1 5 7 paper cassette described 3 4 paper jams 5 1 5 7 paper quality avoiding document jams 5 8 WorkCentre Pro 665 685 765 785 Pause Key 3 8 PC printing mode 3 15 pending jobs see also delayed operations Phonebook Key described 3 11 used 4 16 phonebook reports 4 16 4 19 group 4 19 one touch 4 20 speed dial 4 18 polling polling
62. the same circuit as an electrical device which may create interference Locate the machine within reach of a telephone outlet Use a dedicated single line telephone connection Place the machine on a level surface An uneven surface can cause performance problems such as poor copy quality and paper jams WorkCentre Pro 665 685 765 785 2 1 Machine Requirements Space Requirements Adequate space is required for ventilation ease of operation maintenance and replacement of consumables Provide the minimum space as shown in the following figure 47 2 inches m 1 2 meter gt 37 4 inches 950 mm Y 003 Height 30 inches 750 mm Height with Optional Paper Tray 33 4 inches 850 mm Height with 2 Optional Paper Trays 37 4 inches 950 mm 2 2 WorkCentre Pro 665 685 765 785 Machine Overview 3 Machine Overview This chapter provides an overview of the WorkCentre s hardware features and operation The Control Panel is discussed and each key is defined System Overview The WorkCentre allows the user to send receive copy and print documents The ControlCentre software allows you to program the Fax settings on a PC and write the settings to the WorkCentre When you switch on the power and the system has warmed up the machine is in the standby or idle mode and is ready to use When an action completes successfully the machine returns to the Standby Mode and displays the follow
63. time information is used by the internal clock to start delayed jobs and record data on faxes and reports In addition you can program the WorkCentre to print the date and time on documents that you send and receive For more information on printing the date and time on your documents see Setting the Send Header and Setting the Receive Footer later in this chapter To set the Date amp Time 1 Press Menu kkk TOO Time format 1 24 hour 2 12 hour 1 2 Selectthe Time format To select 24 hour format press To select 12 hour format press 2 Please refer to your Menu Map 4 2 WorkCentre Pro 665 685 765 785 Getting Started Date amp time DD MM YYYY DAY 00 00 0000 3 Using the Numeric Keypad and the arrow keys enter the date then press Enter Date amp time HH MM 00 00 4 Using the Numeric Keypad and arrow keys enter the time if necessary use the arrow key to set then press Enter Date format 1 MM DD YYYY 2 DD MM YYYY 3 YYYY MM DD 4 MM DD YY 15 DD MM YY 16 YY MM DD 5 Selectthe Date format To display the date in the order of Month Day Year 4 digit press 1 To display the date in the order of Day Month Year 4 digit press 2 To display the date in the order of Year 4 digit Month Day press To display the date in the order of Month Day Year 2 digit press WorkCentre Pro 665 685 765 785 4
64. tination by simply pressing a One Touch key Keypad Dialing This dialing method allows you to initiate a job by dialing the remote number on the numeric keypad On hook Dialing Manual Dial This method allows you to initiate a job without picking up the handset You can choose Alpha Speed One Touch or Keypad dialing operations Off hook Dialing Manual Dial This method allows you to initiate a job with the handset held in your hand You can choose Alpha Speed One Touch or Keypad dialing operations Delayed Start The transmission is programmed to be sent at a later designated time This feature permits cost savings by scheduling transmissions during periods when telephone rates are lower Priority Transmission A priority send transmission is performed prior to any other job reserved in memory Not available in all markets WorkCentre Pro 665 685 765 785 Machine Overview e Resend Normally document data stored in memory for transmission is cleared if the transmission fails to reach a remote facsimile This function enables the machine to save the stored document and allows you to re schedule the transmission Group Transmission Sends the same document to more than one location via multiple sequential transmissions Sometimes referred to as broadcast Relay Transmission Sends a document to a relay station The relay station then sends the document to another relay station or to the f
65. uipment which Xerox Limited and its authorized distributors supplies to customers conform with all the relevant safety legislation and standards QUESTION Is Xerox equipment safe ANSWER All Xerox equipment supplied by Xerox Limited and their authorized distributors conform to all relevant safety legislation and standards QUESTION Is the Xerox equipment in my premises safe ANSWER All Xerox equipment supplied by Xerox Limited and their authorized distributors conform to all relevant safety legislation and standards However like all electrical equipment they have to be regularly serviced and maintained by competent persons Xerox Limited Customer Service Engineers ensure Xerox equipment is serviced and maintained to exacting Xerox safety standards If you would like your Xerox equipment to be serviced and maintained to such high standards please contact your local Xerox Limited Customer Service Organization They will be pleased to assist you QUESTION Does the Xerox equipment in my premises comply with the Electricity at Work Regulations ANSWER All employers and self employed persons must ensure that the electrical systems in their premises are safe This will include ensuring Xerox equipment in such premises is safe Xerox Limited s Product Safety function has prepared a guide which contains a list of tests which may be completed by your Xerox Limited Customer Service Organization THESE TESTS MUST BE CARRIED OUT ONLY B
66. vironmental Compliance Safety Certification and Environmental Compliance Your Xerox product and supplies have been designed and tested to meet strict safety requirements These include safety agency examination and approval and compliance to established environmental standards Please read the following instructions carefully before operating the equipment and refer to them as needed to ensure the continued safe operation of your machine The safety testing and performance of this product have been verified using Xerox materials only Follow all warnings and instructions marked on or supplied with the product Symbology A General warning alerts user to the risk of personal damage Example of specific warning Warning Heated Surface Unplug this equipment from the wall outlet before cleaning Always use materials specifically designated for this product Use of other materials may result in poor performance and could create a hazardous situation Do not use aerosol cleaners Follow the instructions in this User Guide for proper cleaning methods Never use supplies or cleaning materials for purposes other than what they were intended Keep all supplies and materials out of reach of children Do not use this product near water wet locations or outdoors Do not place this product on an unstable cart stand or table The product may fall causing personal injury or serious damage to the copier WorkCentre Pro 665 685 7
67. ze 4 10 document specifications 4 10 document tray described 3 4 loading documents 4 10 4 11 maximum documents 4 10 alarms lights described 3 8 alpha dialing key 3 8 alphabet dialing described 3 16 automatic document feeder see also document feeder document size 4 10 document specifications 4 10 loading documents 4 10 4 11 maximum documents 4 10 automatic receive mode described 3 18 avoiding document jams 5 8 batching described 3 3 battery 3 1 WorkCentre Pro 665 685 765 785 calendar setting the date and time 4 2 Cancel Job Key described 3 9 cassette see paper cassette causes of document jams 5 8 Chain Dial Key described 3 12 Charge Code Key described 3 12 clearing document jams 5 8 paper jams 5 2 collating collate fax described 3 18 communication lights described 3 7 communication mode 3 14 communications communication lights 3 7 communication modes 3 14 group dialing described 3 2 multi access 3 18 3 21 receptions described 3 18 transmissions described 3 16 types 3 16 3 18 components control panel listed 3 7 Confirmation Key described 3 11 confirmation tone 3 13 contrast see also resolution INDEX 1 changing 4 13 Contrast Key described 3 9 control panel 3 6 3 12 components listed 3 7 cover open buttons described 3 4 described 3 4 direct access function keys described 3 11 3 12 document jams 5 8 function keys described 3 7 3 12 illustrated 3 6 Copy Key described 3 9 copy mode 3

LG Electronics 660T Flat Panel Television User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents