Lenovo 8994 Personal Computer User Manual
Contents
1. DHCP server Enter the IP address exclusively assigned to this server Obtain the IP address automatically f Use Fixed IF Address IP Address The subnet mask is used If this option is enabled bnet Mask EES to distinguish the the server uses the IP network ID and host ID address settings Gateway portions of the IP specified address The IP address for the default gateway that connects to the Internet or other network Exits and saves Exits and discards changes changes Change the settings and click on OK when done to complete the configuration setup Note 1 After changing some settings you may be asked to restart the LevelOne NAS 40 2 Ifyou want to set up detailed configuration you need to enter the administration web page of the LevelOne NAS via the browser For more configurations check your browser under System Administration 2 Viewing detailed information on the LevelOne NAS Choose the LevelOne NAS by highlighting it with the mouse then click on Group Data to display current settings and status as shown below Detail Information Teddy Evo Workeroup Name Teddy MAR MAC Address 00 4 E F0 00 00 9 4 IP Address 172 16 13 174 subnet Mask 2550 255 0 0 Fateway 0 0 0 0 DHCP Enabled Version 1 00 3 To find information on other LevelOne NASs in the same network Click on Refresh in the Toolbar to find information on other LevelOne NASs in2. Under the tools bar menu click Search 3 Computer Name path key in LevelOne NAS name 4 Click once on Search Once the LevelOne NAS 1s found double click your mouse button to connect 2 Once the connection to the LevelOne NAS is successful all listing on your available network share are displayed Move the mouse pointer to the network share you want to access and click the right button once A popup menu appears select Map Network Drive A popup window that allows you to assign a drive letter for the network share appears note do not use the drive letter used by the CD ROM If you wish to make the share folder available for your next start up check the Reconnect at logon box on the popup window and click on OK to make the network share as one disk drive in your system 24 A 172 16 13 150 Y ourFolder Map Network Drive Map Network Drive 3 Once the network share is a part of your system disk drives you can locate the network share in My Computer and access it as a regular hard disk drive Using the Apple Mac Operating System If you are a Mac OS user you can use the following two methods to access to your LevelOne NAS 1 Using Network Browser a Choose Network Browser in the Apple menu KO File Edit View Special Help AboutTnis Computer r Apple System Profiler E Calculator fo Chooser Ci Control Panels f Favorites B Network Browse
3. IP settings 1 Obtain IP address settings automatically via DHCP If your network supports DHCP the LevelOne NAS will automatically use the DHCP protocol to retrieve the IP Internet Protocol address and related information 14 2 Use static IP address Use the user defined IP address settings e Fixed IP Address The IP address 1s a 32 bit digit code used to differentiate each single entity on a network The IP address is separated into 4 groups of eight bits separated by dots 192 168 0 1 e Subnet Mask The subnet mask is used to define computer within the same local network It is a 32 bits digit code 255 xxx Xxx XXX e Default Gateway The gateway is generally referred as an interchange point that connects two networks such as LAN and WAN If you don t need to configure gateway address just set it as 0 0 0 0 e Enable DHCP Server Once the DHCP server s dynamic address allocation function is activated it will automatically assign dynamic addresses to any computer in the network that is configured to automatically obtain IP addresses Note Only one DHCP server may be activated at any time in a network to avoid causing conflicts in communication e Microsoft Networking Users using the LevelOne NAS on the Microsoft Windows operating systems must start Microsoft Network Services If the local network has a WINS server installed please specify the IP address The LevelOne NAS will automatically register 1ts name and IP
4. NAS Under this condition you can reset the administrator password and network configuration to the factory default 1 Use the tip of a ball point pen and depress the configuration reset switch located on the back of the LevelOne NAS Hold it for about 5 seconds until the beep 2 The network configuration will be reset and you may need to re configure some or all of the network settings before you can connect to the LevelOne NAS 3 Use a web browser to connect to the LevelOne NAS Enter the System Administration and enter the following login name and password Login Administrator Password admin You can then perform system administration Note If the configuration reset switch is disabled in the System Tools Hardware Settings page you are no longer able to use this function Please remember your administrator password Disk Failure or Malfunction If you are suffering from a disk failure or malfunction please do the following 1 Log all abnormal events or messages for technician s reference 2 Stop all operations of the LevelOne NAS and power it off 3 Contact the customer service for technical support 32 Note Your LevelOne NAS must be repaired by a trained technician Please do not try to repair the LevelOne NAS on your own Power Outage or Abnormal Shutdown In the event of power outage or abnormal shutdown of the LevelOne NAS the system should return to its original state prior to shutdown or power outage af
5. limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used according to the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which 1s found by turning the equipment off and on the user 1s encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna amp Increase the separation between the equipment or device amp Connect the equipment to an outlet other than the receiver s amp Consult a dealer or an experienced radio TV technician for assistance CAUTION Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type recommended by the manufacturer Dispose of used batteries according to the manufacture s instruction Contents COVER VIEW ENERE I E E A IE N A NEE 3 Package CON NT 3 NONNE 3 Installation and Set up of LevelOne NAS seeesesessssssssssssssnreneneneeeeessnnnnnnnnnnnnnerennnneessesssnenennnnnnnneeennnneneee 6 Installing the Hardware as 6 Seun bee FIRS NN NSG 9 Administration of the LevelOne NAS i eseseessesssssssssssssssrsssssssssssssssssssssssssssssseeseseseeeseeee
6. name Lisa hiang 192 176 0 1 RMA HW AS00009 172 16 13 193 Was eric huang 172 16 13 76 Was DOV NAGS 172 16 14 152 Was NAs2S002C 172 16 14 167 Was NW AS000004 172 16 13 108 Was NW AS00009F 172 16 13 82 NAS Set up Server Name Teddy Kuo eee Date Time and basic DQV 2 172 16 14 125 NAG network D V TEST 172 16 14 107 NAS Home 172 16 14 133 NAS NASODODAS 172 16 13 79 configurations View detailed information Re search for LevelOne Display operating Configuration about the selected server NASSs in the network zone instructions for complete exit the Installation program Wizard 39 Operation Help 1 Set up your LevelOne NAS Select the LevelOne NAS that you want to configure and then click on the Configure button An authentication window asking you to enter the administrator s password appears as shown below Adminstrator Login Administrator Name Administrator Administrator Password Ege Case Click on OK after entering the password If the name and password are correct the configuration window is displayed on the screen Name for this LevelOne NAS You can input any HEr name you want except Basic Configuration special characters The maximum length is 14 characters po term If this option is Name nerverN ame enabled the server Term i D D 2001 obtains the IP address Le ald he Pe Poa Time automatically from the Time hhmm 23 ER
7. on B again to show current CPU temperature and fan speed Note NAS 2000 will not show this information Click B again to display the model number and version information as shown below 34 System Setting Function e Enter System Setting 1 Press the switch A for two seconds to enter System Setting 2 Press the switch B for selection options 3 Press the switch A to enter the selection options e NETWORK SETTINGS Enter the Network Setting press the switch B to choose DHCP or Static IP 1 Obtain IP Address Automatically DHCP DHCP will automatically obtain IP address settings 2 Specify Static IP Address STATIC IP press the switch A to select STATIC IP and complete the following steps e SET STATIC IP Press the switch B to set the IP address settings press the switch B to select the number 0 25 Press the switch A for the next number e SET NETMASK Follow the same procedure as above e SET GATEWAY Follow the same procedure as above e SELECT STATIC IP Press the switch B to select YES or NO and confirm by pressing the switch A NO will return to the Network Settings menu e RESTART SYSTEM You need to restart the system to make changes effective Press the switch B to select YES or NO and press the switch A to confirm e POWER DOWN Press the switch A to shutdown the system e REBOOT SYSTEM Press the switch A to reboot the system e EXIT Press the switch A to exit the settings menu 35 Appendi
8. LevelOne FNS 5000 FNS 7000 GNS 8000 Network Attached Storage User s Manual Version 1 0 CUSTOMER SERVICE To obtain service or technical support for your system please refer to the registration card for detailed contacts TRADEMARKS LevelOne NAS is the trademark of Digital Data Communications Microsoft Windows and Internet Explorer are registered trademarks of Microsoft Inc Novell and NetWare are registered trademarks of Novell Inc Apple and Macintosh are registered trademarks of Apple Computer Inc All other brand or product names are trademarks of their respective companies or organizations LIMITED WARRANTY In no event shall LevelOne s liability exceed the price paid for the product from direct indirect special incidental or consequential software or its documentation LevelOne offers no refunds for its products LevelOne makes no warranty or representation expressed implied or statutory with respect to its products or the contents or use of this documentation and all accompanying software and specifically disclaims its quality performance merchantability or fitness for any particular purpose LevelOne reserves the right to revise or update its products software or documentation without obligation to notify any individual or entity FCC STATEMENT LevelOne NAS has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These
9. address with the WINS service Or you can enable your LevelOne NAS as the WINS server for your network e Apple Networking Users using the LevelOne NAS on Apple s Mac operating systems must enable AppleTalk network support If your AppleTalk network uses extended networks and is assigned with multiple zones please assign a zone name to the LevelOne NAS If you do not want to assign a network zone please enter an asterisk Asterisk 1s the default setting e NES Service Users using LevelOne NAS on Unix Linux operating system computer or server must start Unix Linux NFS service The LevelOne NAS supports NFS version 2 0 To correctly use the NFS service you must assign a User s UID and IP address Please select User Management Users NFS Settings to start the setup 15 e NetWare Service If you wish to use NetWare to access the LevelOne NAS you must activate the NetWare service The LevelOne NAS will then operate in a manner similar to a Novell NetWare 3 12 file server e Web Service Other than standard OS support you have the choice to use a web browser to access your files on the LevelOne NAS If your LevelOne NAS is connected to the Internet and uses a valid IP address the LevelOne NAS allows you to access your files using a web browser from anywhere in the world e FTP Service If you wish to download files from or upload files to your LevelOne NAS by using file transfer protocol FTP you must first activ
10. ate the FTP service Disk Configuration The LevelOne NAS can accommodate a maximum of four disks The Disk Volume can be configured according to your needs e Single Disk You can choose to use a stand alone disk However if the disk is damaged all data will be lost e RAID 5 Disk Volume Three or more hard disks can be teamed up to form a large capacity RAID 5 disk group This system will distribute and store data among its various member disks as it is received At the same time it uses an amount of space roughly equivalent to a whole disk to store reference numbers with the same elements Should one of the disks in the group suffer some kind of damage you can shut down the computer and install a new disk and the system will restore the data on the new disk using the reference number In addition if you have a system with four disks but use only three in your RAID 5 group the fourth will serve as a backup disk If one of the three disks is damaged the system will automatically start using the spare disk without powering down and changing the affected disk Generally speaking the capacity of a RAID 5 disk group is one disk s worth of space less than the total rated capacity of the group Note RAID 5 may be used only with equipment which has three or more disks e RAID I Mirroring Disk Volume Mirroring Disk protects your data by automatically backing up the contents of one disk onto the second disk of a mirrored pair This protects yo
11. cape Navigator 4 5 or later Microsoft Internet Explorer 5 5 1s recommended to complete administrative tasks for the LevelOne NAS Accessing the Administration Page The following methods allows administrator to access the Administration page 1 Launch your web browser Microsoft Internet Explorer version 5 5 is recommended If you know the IP address of the LevelOne NAS type the IP address in the address bar of the browser and press Enter The IP address can also be obtained on the LCD display of the LevelOne NAS see Appendix A TA NAS Microsoft Internet Explorer Back fomed Stop Reltesh Home agaes 195800 192 168 0 1 2 Use the Quick Installation Wizard see Appendix C and double click on LevelOne NAS in the list which appears When the browser displays the home page of your LevelOne NAS click on the Administration link Enter the user name and password to continue the administration setup 10 nter Network Password Please type pour user name and password Site 192 168 0 1 Realm User Name Administrator Password HEHHE fee h m h m ken h m am n fbb dds dee km nm on prestert mimrer dann ni nn kand m bm tn h n The factory default login name and password are as follows Login Administrator Password admin If this is the first time you enter the Administration page the Quick Configuration page appears automatically Please refer to t
12. cted This light flashes when data is being transmitted through the network This light flashes when data is being stored or retrieved from the disks Chapter 2 Installation and Set up of LevelOne NAS Installing the Hardware Install Hard Drive into FNS 7000 Once you start installing a hard drive into the FNS 7000 you have to obey following steps Power off the FNS 7000 Release the screws right amp left sides of drive bay in which the new hard drive will install Make sure the hard driver s jumpers Master Slave setting are set to Cable select when you put the new hard drive into the drive tray Instructions of new hard drive settings please refer to the user guide along with the new hard drive Attach the power cable from drive tray to your new hard drive Attach the IDE connector to the new hard drive please keep around 15 20 between hard drive and drive tray 15 20 Put the screws into the drive tray s down side to tighten new hard drive L F fe 7 Slide the drive tray with new hard drive into the drive and tighten the screws right amp left sides EG a 1 Install Hard Drive into GNS 8000 Once you start installing a hard drive into the GNS 8000 you have to obey following steps Power off the GNS 8000 Push the front panel ears and pull out the panel z i kar Make sure the hard driver s jumpers Master Sla
13. er the folder of the file you want to upload 2 Click on Browse to select the file you want to upload 3 Click on Upload Downloading 1 Click the right mouse button on the file which you want to download 2 A context menu appears Click on Save Target As to download the file Logging out Web File Manager On the tool bar click on Ea Logout to leave the web file manager 37 Web File Manager Icon Up go back to the parent folder Refresh reload the current page Home go back to the network shares list home page Create Folder create a new folder Rename rename the selected file or folder Delete remove the selected file s or folder s Select All select all files and folders Select None cancel all selection Logout leave the web file manager Full access network share folder Read only network share folder Malfunction network share folder 38 Appendix C Quick Install Wizard Introduction The Quick Install Wizard enables you to list the LevelOne NASs within your local network and display basic information such as server names workgroups and IP addresses You may also set up the server name date time and basic network configuration of the LevelOne NAS via this program Screenshot Indicates the IP address of the server Windows workgroup joined by the LevelOne NAS All LevelOne NASs can be identified using a unique server
14. guration C D Statistics amp Logs Quick Configuration The Quick Configuration will guide you through the configuration process step by step as follows l 2 8 9 Enter the name workgroup and description for this server Change the administrator s password Enter the date time and time zone for this server Select the language that this server will use for file names Enter the IP address subnet mask and default gateway for this server Select the network file services that you want to provide on this server Configure disk volume on this server Configure the method of user authentication Manage users and user groups for this server 10 Manage network shares on this server Due to different configurations it might takes from 3 to 10 minutes to complete the Quick Configuration System Settings Basic system settings include the server name date time and language settings e Server Name You must assign a unique name for your LevelOne NAS for ease of identification within the local network The server name can accommodate as much as 14 characters which 13 can be a combination of letters A Z or a z numbers 0 9 and hyphens The server will not accept name containing blank spaces period or names with only numbers The LCD display will show the current server name Next you must configure your LevelOne NAS to the workgroup The workgroup represents a basic computer group within the M
15. he Quick Configuration section for more details 11 Administration The Administration comprises the following eight sections Administration Quick Configuration system Settings gt Server Name gt Date amp Time Language Setting gt View System Settings Network Settings gt TCP IP Configuration gt Microsoft Networking gt Apple Networking NFS Service gt NetWare Service gt Web Service FTP Service gt View Network Settings Disk Configuration gt Create Disk Volume Single Disk Volume gt RAID 5 Disk Volume S RAID 1 Mirroring Disk Volume gt RAID 0 Striping Disk Volume gt Linear Disk Volume Delete Disk Volume Examine Disk Volume Format Disk Volume gt View Disk amp Volume Status gt User Management gt Users Create Change Password Create Private Network Share Assign User Groups NFS Settings Quota Settings Delete User Groups Create Create Private Network Share Assign Users Delete gt PDC Authentication Settings Quota Backup Restore User Settings Network Share Management gt Create Property Access Control Delete c gt System Tools gt SNMP Settings gt Alert Notification gt Restart Shutdown gt Hardware Settings gt UPS GNS 8000 only System Update gt Change Logo Tape Backup GNS 8000 only gt Statistics amp Logs gt Active Users Event Logs DHCP Logs 12 E User Management S Network Share Management System Tools Dink Confi
16. icrosoft Network Files are normally shared within the group Workgroups can accommodate as much as 15 characters but must exclude the following characters 53 See The first character cannot be a period For ease of management and usage please set your LevelOne NAS and attached computer s in the same workgroup Moreover the LevelOne NAS allows you to specify comments such as administrator name department or location that describe the LevelOne NAS for ease of identification to an on line user e Date amp Time Set the date time and time zone according to your current location If the settings are incorrectly entered the following problems may occur Il When using a web browser to access or save a file the time of the file accessed or saved may be out of sync 2 The system event log time will be incorrect compared to the actual time an action occurred e Language Setting The server is based on the language settings and uses it accordingly while creating or displaying files and directories Select the correct language settings to avoid the following problems I Inability to create files or directories with special wording 2 Inability to display files or directories name with special wording Network Settings The network settings include TCP IP configuration and network service settings e TCP IP Configuration According to your local network you can choose the following two methods to configure the TCP
17. is enabled Depress and hold on the configuration reset switch for 5 seconds to reset the administrator password and network settings to the factory default 3 Enable hard disk standby mode The default is enabled Hard disk will go to standby mode if there is no access within the period you specify 4 Enable buzzer Default setting is enabled If the buzzer is disabled it will not sound when a system error occurs but the warning light will still shine UPS For GNS 8000 Only The LevelOne NAS is equipped with a serial port interface to support UPS uninterrupted power supply connection By connecting the UPS to the serial port and enabling the UPS support you can protect the system from abnormal shutdown caused by power outage In the event of utility power failure the system will shut down automatically by probing the power status of the connected UPS unit You can also set a shutdown timer to power off the system automatically after it detects the AC power failure In general the UPS can keep supplying the power for the system for about 5 to 10 minutes But this depends on the maximum load of the UPS and the number of the loads connected to it If the UPS you used is not supported please contact technical support or visit our web site for updated news System Update Performs system software updates Make sure that the image file that you are about to 21 update is the correct version and read through the instructions carefully It
18. is wise to back up all existing data on the LevelOne NAS prior to performing system software update The current settings will remain unchanged after the system is upgraded Change Logo You can place a picture that you desire on the upper right corner of the home page The size of the picture cannot exceed 20K Tape Backup For GNS 8000 Only The tape backup tools allow you to perform the backup or restore jobs using a tape drive with ease In principal there are two different types of backups Full Backup or Incremental Backup Full backup will back up all the files in the backup source However the incremental backup will only back up any modified or new files after last backup Backup Now To back up the files to the tape right away you can run an immediate backup job Restore To restore from the previously backup tape you can perform the restore operation Scheduled Jobs You can schedule a backup job to be executed automatically at any later time periodically Tools There are several useful tape functions to operate on the tape drive For example you can rewind eject or erase the tape here Job Status You can review or monitor the status of the backup or restore job Note 1 The SCSI tape drive has to be properly connected and turned on before starting the system or it will not be detected 2 The HVD High Voltage Differential SCSI tape drive is not supported by this system 22 Statistics amp Logs You can mon
19. itor the current logon user of the LevelOne NAS and the system event logs for the purpose of user administration or system diagnostic reference e Active Users Displays information on all online users e Event Logs The LevelOne NAS can store thousands of recent event logs including warning error and information messages In the event of a system malfunction LCD error indicator lights up the event logs can be retrieved to help diagnose the system problem e DHCP Logs If the DHCP server function 1s activated you can use it to monitor all of the assigned dynamic addresses client MAC addresses and other information 23 Chapter 4 Accessing the LevelOne NAS Using Microsoft Windows Under the Microsoft Windows operating system you can access the LevelOne NAS using the following steps 1 Use the following methods to locate and connect the LevelOne NAS within the local network e Click on the Start button and select Run in the Windows menu bar Enter the name of the LevelOne NAS for example NASO04001 and press Enter e You may also look for the LevelOne NAS within the Network Neighborhood Locate the workgroup and find the name of your LevelOne NAS When the server 1s found double click on the server name to connect e You may also use the Search for Computers function to look for your LevelOne NAS in Windows Under Windows ME or Windows 2000 please follow these steps 1 Open My Network Places folder 2
20. main Controller server to handle the domain security in your network you don t need to re enter all the users and groups with the LevelOne NAS You can simply enable the PDC authentication feature the LevelOne NAS will connect with the NT domain and get all the information of the domain users and groups automatically To enable PDC authentication you must enter the domain name as well as the user name and password already established in this domain The LevelOne NAS will use the user name and password to log in to the NT domain and retrieve user and group information Once you have configured the LevelOne NAS to use PDC authentication all NT domain users and groups will appear in lists of users and groups for which you can define access rights Note NetWare users cannot be authenticated via the PDC server To properly authenticate NetWare users please go to User Management Users Change Password page and type the password for that user manually Quota The amount of space given out to all users in the system can be limited in order to manage and allocate it efficiently Once these restrictions are in place users will be prevented from obtaining more space once they have reached their limit This prevents monopolizing of a large amount of disk space by a small group of users No limitations are set on the system when it leaves the factory Backup Restore User Settings You may back up all user settings on to your computer as well as re
21. nnansvsdonssaassenccsseasseenssnsseeeoseasssenss 36 Usine Web File Mas 36 Web File Mel 38 Appendix C Quick Install Wizard vssssssscscccsccccccssssasevsssenassvcecescassscveseussensesnsssvesseasesseacsssassennuassevessesassecses 39 bodene 39 PENN AE E es E A PUR Se TINT PUR SEM Tee T NT See nr Omen Tey en eet ater 39 Orsa Hen Seen nee ae eee ee ee en Sr a eee Ser a ee ee ee Ser eee 40 Overview Package Contents e Network Attached Storage Appliance e User s Manual e Power Cord e One CAT 5 Ethernet Cable e Quick Install Wizard CD ROM System Overview FNS 5000 amp Front View LCD Panel zre 4 LED indicators Power Error Network and Disk Access Setting Switch B Setting Switch A amp Rear View Configuration Reset Switch Network FNS 7000 Front View LCD Panel Setting 4 LED indicators Power Switch A Error Network and Disk Access 4 IDE Hard Disk Drives Setting Switch B Rear View Configuration Reset Switch Power Switch RJ 45 Network ATX Redundant Power Supply GNS 8000 Front View Setting Switch A F 4 LED indicators Power Error Network and Disk Access Setting Switch B amp Rear View RS232 Connector for UPS SCSI Connector for Tape Drive Indicator light at the left of the LCD panel Shines when power is on Indicates a system error which needs to be corre
22. or the hard disk to return to normal mode You can select System Tools Hardware Settings to change the setting You can also perform the following disk administration Create Disk Volume Delete Disk Volume Examine Disk Volume Format Disk Volume View Disk amp Volume Status User Management The LevelOne NAS can share its files with multiple users It is important to plan and organize users and user groups accessibility to ease the administration work Users The factory default settings contain the following user settings Administrator By default the administrator is a member of the administrators group and has access to the system administration You cannot delete the user Administrator Guest When you use a non registered user name to login the server recognizes it as a Guest and will allow limited access A guest does not belong to any user group You cannot delete the user Guest or create a password 17 Anonymous When you connect to the server by FTP service you can use the name to login as a guest You cannot delete this user or change its password You can create a new user according to your needs The following information is required to create a new user e User Name The user name must not exceed 32 characters It is case insensitive and it can contain double byte characters Such as Chinese Japanese and Korean But it cannot contain any of the characters below Alper e Password The password must n
23. ot exceed 16 characters Due to security concerns the password must be at least 6 characters Try to avoid using codes that are easily decipherable You can perform the following settings for users e Create User e Change Password e Create Private Network Share e Assign User Groups e NES Settings e Quota Settings e Delete User e User Groups To administer access rights you can create user groups User groups are a collection of users with the same access rights to files or folders By factory default the server contains the following pre defined user groups Administrators All members of the administrators group have the rights to perform system management You cannot delete the administrators user groups Everyone All registered users belongs to everyone group You cannot delete the user groups Everyone or delete any of its users 18 You can administer user groups with the following e Create User Groups e Create Private Network Share e Assign Users e Delete User Groups User groups name must not exceed 256 characters It 1s case insensitive and it can contain double byte characters Such as Chinese Japanese and Korean But it cannot contain any of the characters below pr To properly manage security it is very important to manage users and user groups You may set the share access parameters of each user or user group accordingly PDC Authentication Settings If you have a Windows PDC Primary Do
24. r Gl Recent Documents ES Recent Servers Ef Remote Access Status Scrapbook oc jr sner ned Internet Explorer 4 5 Stickies 25 b In the Network Browser choose AppleTalk a list of all computer on the AppleTalk network appears Choose the LevelOne NAS b B5 Idap four 1 1 com c Once the LevelOne NAS 1s chosen the system will request you to input the login name and password Click then Connect or use Guest to enter When the login name and password are confirmed a popup window informs you that the connection is made with the LevelOne NAS Connect to the file server NAS00009D as gt Guest Registered User Password GER L Add to Keychain Clear Text Password d When the LevelOne NAS is connected the network browser displays all the network shares You can then access or drag amp drop the share folders D nasooongr EE S items sw public Se publict Se publicz Se public Se publica 26 e Choose either one of the network shares to start to link The network share appears on the Mac OS desktop 5 items public em PUbLiC K Se publici Se public Se publics Se publica 27 2 Using the Chooser a Select Chooser in the Apple menu bar About This Computer r Apple System Profiler Calculator Chooser rs Gi Control Panels i Favorites Key Caps ES Network Browser l Recent Applications Ej Recent Documents Ef Recent Se
25. rvers Fir Remote Access Status Scrapbook g Sherlock 2 a Stickies b Click on AppleShare The name of the LevelOne NAS appears on the right side of the window Chooser Select a file server DOV Burnning Color SW 1500 MA219CC2 mac Meiji NWASOOOOTC NWASOOOO9C NWASOOOO9D Color Sy Pro NASO0009Ep CSW 6000 Series LaserWriter 300 05 NASO000A4 4 NASOOOTE NASOOOTE4 LaserWriter amp Server IP Address Active APRIETE Inactive 28 c Use the mouse to highlight the LevelOne NAS and then click on the OK button located at the bottom right hand side of the screen Ei NO 05 SSS Select a file server DOV Burnning Color SW 1500 MA219CC2 mac EA Meiji NASOOOOIC NASOOOOSC NASOOOOSD Color Sy Pro NASOOOOA 2 NASOOOTE NASOOOTE4 LaserWriter amp Server IP Address Active dela 3 Inactive d Enter the correct login name and password or use Guest to login then click on Connect Connect to the file server NAS1234 as d Guest i Registered User Password Add to Keychain Clear Text Password Change Password Connezt 5 38 5 29 e All available network shares will be listed Use the mouse to choose a network share and click on OR MAS OOO09E Select the items you want to use public publics Checked items willbe opened at system startup time k ox 2 8 5 f You can
26. s and cannot contain the characters listed below eae e Comment The Comment field allows a brief description of the share folder to help users identify its purpose in a network neighborhood window The comment cannot exceed 128 characters Once the network share is created you can start assigning access rights to users or user groups e Full Access Full access allows the user or user group to read write create or remove all files and directories in the network share e Read Only Reads files only in the network share but denies functions to write create or delete files or directories 20 Deny Access Denies all files access on the network share System Tools The following system tools allow optimized maintenance or management of your LevelOne NAS SNMP Settings In order to use Simple Network Management Protocol SNMP to manage the LevelOne NAS s network components the SNMP service must be started Alert Notification Configures administrator s e mail address and SMTP server IP address In case of warning or malfunction an email 1s automatically sent to the administrator Restart Shutdown Powers off or restarts the LevelOne NAS Hardware Settings You can enable or disable the following hardware functions of your LevelOne NAS 1 Enable LCD panel setting function The default is enabled Allow you to change the TCP IP configuration using the LCD panel buttons 2 Enable configuration reset switch The default
27. seeeeeeeeeeeeeeeeeeeeeeeeee 10 Accessing the Administration Paseo san 10 ANTAS 12 Quick Conan sos 13 Sven Sen au 13 Nermok Sem 14 Disk Conn ses ERR T A 16 USER Minn 17 NetWork Share Manresa S SES 20 SEN TO eee SSN 21 SANHS SA Loss 23 Accessing the LevelOne NAS saa 24 Une Microsoft W ING OWS senorita a AA T AN A A E aaa 24 Using the Apple Mac Operating System ccccccccccsscscsssssssssssssessscssssssnsssssssnssssssssssssssessssssssasscseseaesens 25 Using the Unix Linux Operatine System Jer 31 Using Novell NENNE see eee 31 Using a Web Browser couronna i a ea ee ls cee en es cee eek 31 Usine File Transfer Protocol Cl 7 Py hj 31 LevelOne NAS Maintenance siccccsscicssssscssccsascascasesccsvesessescesasccccesesannsesesasnsessssanseneuacsnasesannseseaasnssssshaaseceie 32 Shutdown Restart the Server aaasaadesasae ai es 32 Reset the Administrator Password amp Network Settings rrnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn 32 Disk Failure or Malfunction vase 32 Power Outage or Abnormal Shutdown ososoooonnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnene 33 Appendix A ED Pod SN 34 Displayed Inrormationixencccc ance aurea a aurea a 34 Checking IP address system and disk information sssvvvvvvnvvnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnne 34 SEN Sene Fint so 35 Appendix B Web File Manager sisssssssssscscsssssssccssssaccwssnsesasvesceaansssvsassasaba
28. sk On line Sever also provides a convenient web style file management that allows using a standard web browser to access your data If you link the LevelOne NAS onto the Internet and use a public IP address you can logon to access the files from anywhere in the world For more information please refer to Appendix B Using File Transfer Protocol FTP In addition to working with multiple operating systems the LevelOne NAS also supports FTP You can use popular FTP software and enter the user name and password to connect to the LevelOne NAS Or you may key in anonymous as the user name in order to access public network share folders that is open to guest users 31 Chapter 5 LevelOne NAS Maintenance The LevelOne NAS has been specially designed to run on 24 hours 7 days a week and to be ready at all times It is also robust to protect against system crashes caused by power loss This section provides a general maintenance overview Shutdown Restart the Server Please use the following steps to shutdown restart the server 1 Ask all the connected users to save their working files and stop using the LevelOne NAS 2 Open the administration web page and go to System Tools Restart Shutdown Follow the instructions to restart or shutdown the system Reset the Administrator Password amp Network Settings If you accidentally forget the administrator password you will not be able to perform any administration work on the LevelOne
29. store previously backed up user settings file to your LevelOne NAS This function allows you to easily maintain the user settings 19 Network Share Management The primary purpose of network storage 1s file sharing In a standard operation environment you can create different network share folders for various types of files or provide different file access rights to users or user groups By factory default a public share folder is created The share folder gives full access to all users or guests Administer network shares with the following e Create a Network Share e Change the name path and comment of a network share e Set access right for a network share e Remove a network share You can create new network shares according to your needs While creating a network share the following parameters must be set e Network Share Name The network share name must not exceed 12 characters It cannot contain double byte characters such as Chinese Japanese and Korean as well as the characters listed below es Ve EL e Disk Volume The network share will be created under the specified disk volume e Path All data are stored under the assigned path onto the disk volume You can select Specify Path Automatically to allow the server to automatically create a new path on the disk volume to store the network share files Or you can assign a specific path for the share folder The manually assigned path cannot exceed 256 character
30. tem is ready for set up Server Name IP Address At this time the hardware installation of your LevelOne NAS is complete Please proceed to Set up before First Operation Set up before First Operation The factory default settings of your LevelOne NAS will search the network via DHCP Dynamic Host Configuration Protocol to automatically detect IP address settings If your network does not support the DHCP protocol the LevelOne NAS will use the default settings listed below IP Address 192 168 0 1 Subnet Mask 255 255 255 0 Once the LevelOne NAS completes its boot up process the LCD panel displays the current IP address settings If your network does not support the DHCP protocol you must configure your LevelOne NAS to the proper LAN settings before using it for the first time If you do not know your LAN settings please contact your network administrator 1 Use the LCD panel to change the network settings For more information see Appendix A 2 Use the Quick Install Wizard on the disk or the CD ROM to change the network settings For more information see Appendix C Once you complete the LevelOne NAS settings you can use your web browser to perform further administrative settings Chapter 3 Administration of the LevelOne NAS Once you have installed the LevelOne NAS and other hardware and connected it to the networks you can use your browser supports Microsoft Internet Explorer 5 0 or later and Nets
31. ter restart If the system is not operating within normal parameters please proceed with the following steps 1 In the event of system configuration setting lost during power outage or abnormal shutdown please manually reset your desired configurations 2 In the event of system operating abnormally or error message please contact customer service for support To prevent similar occurrence please periodically backup all critical files or folders and remember the following tips 1 Please follow Shutdown Restart the Server steps described above for normal shutdown or restart 2 If you are able to anticipate power outage please backup all critical files or folders prior to power outage and shutdown your server normally Restart your server once the power has returned to normal To prevent major lost of data in the event of a disk failure please back up your data periodically 33 Appendix A LCD Panel Displayed Information After system powers on the following information is displayed on the LCD panel nom Setting Switch A Button A in the Power gt text below Error Network gt Hard Disk gt Setting Switch B Button B in the text below IP Address dm Checking IP address system and disk information Click on B to show the available disk space Please note that this is actually the entire amount of disk space and not the amount of space that you can use Click
32. the same network 4 To display User Help File Click on Help at the top to display the Help file 5 To enter the home page of the LevelOne NAS Double click on the name of the LevelOne NAS to enter the web page for advanced administration Double click on the name of the LevelOne NAS to enter the web Name IP Address page for advanced Lisa hiang 192 170 0 1 administration NW AS00009 172 16 13 193 eric huang 172 16 13 70 DOV NAG 172 16 14 152 NAS WAS29002C 172 16 14 167 NAS HW AS000004 172 16 13 108 172 16 14 107 172 16 14 133 HAs 172 16 13 79 41
33. then close the Chooser program Double click on the icon on the desktop to access your files a FE Select file server NASOOOOTC public l NASOOOOSC NASOOOOSD NASOOOOGSE NASODODA NASOOO1E1 NWASOOO1E4 NASOOO38 1 NWASOOOS8D NASODOSBF NAST1234 LaserWriter 5 Server IP Address oc Active d Inactive 76 2 AppleTalk 30 Using the Unix Linux Operating System Other than Microsoft OS and Mac OS your LevelOne NAS supports Unix based systems such as IBM AIX HP UX Sun Solaris Linux Free BSD etc through the NFS service 1 Under Unix use the following commands mount t nfs lt LevelOne NAS IP address gt lt Network Share Name gt lt Directory to Mount gt For example 1f your LevelOne NAS s IP address is 192 168 0 1 and you want to link the network share folder public under the mnt pub directory use the following command mount t nfs 192 168 0 1 public mnt pub Note You must login as root user to initiate the above command 2 Logged in as the user id that you defined you can use the mounted directory to access your network share files For more information about NFS settings please refer to your Unix system documentation Using Novell NetWare If you are accessing the LevelOne NAS from the NetWare client please refer to the NetWare user s manual for more information The LevelOne NAS functions as a NetWare 3 12 file server Using a Web Browser Other than OS support your Di
34. ur data if one of the disks fails Unfortunately the storing capacity is equal to a single disk as the second drive is used to automatically back up the first Mirroring Disk is suitable for personal or corporate use to store important data 16 RAID 0 Striping Disk Volume Striping disk combines two or more disks into one larger disk It offers the fastest disk access but it does not have any protection of your data if the striped array fails The disk capacity equals the number of disks in the array times the size of the smallest disk Striping disk 1s usually used to maximize your disk capacity or for fast disk access but not for storing important data Linear Disk Volume You can combine two or more disks into one larger disk During file saving the files are saved on physical disks sequentially but do not have a disk failure file protection function The overall capacity of linear disks 1s the sum of all disks Linear disks are generally used for storing large data and are not appropriate to use for file protection of important data By factory default the LevelOne NAS has been pre set into one large disk If you wish to use other disk configurations the settings can be changed during the first Quick Configuration access Furthermore to increase the hard disk life the hard disk will go to standby mode if there is no access within 30 minutes If any data access happens while the hard disk 1s in stand by mode it will take 3 or 5 seconds f
35. ve setting are set to Cable select when you put the new hard drive into the drive tray Instructions of new hard drive settings please refer to the user guide along with the new hard drive Attach the power cable from drive tray to your new hard drive Attach the IDE connector to the new hard drive please keep around 15 20 between hard drive and drive tray 15 20 Put the screws into the drive tray s down side to tighten new hard drive Slide the drive tray with new hard drive into the drive and push forward the panel 1 The following steps will guide you through the LevelOne NAS hardware installation 1 Connect the LevelOne NAS to your Network 2 For GNS 8000 only If you want to back up your files to the tape please connect the tape drive to the SCSI port on the back of your LevelOne NAS Then turn on the tape drive 3 For GNS 8000 only To use a UPS with your unit please connect the UPS to the RS 232 port on the back of your LevelOne NAS via a serial cable And connect the power plug of the LevelOne NAS to the output power inlet of the UPS 4 Power on the LevelOne NAS Note The power switch uses toggle switch design after pushing the button it will return to the original position All you need to do is to flip the switch once to turn on or turn off When all power cables have been properly connected push the Power Switch on the back of the LevelOne NAS The LCD Panel will light up and the sys
36. x B Web File Manager Using Web File Manager Start your web browser and enter your LevelOne NASs home page Select Web File Manager and enter the correct login name and password You may also enter guest in the login name field with no password to access the network shares on the LevelOne NASs as an anonymous guest level The LevelOne NASs allows you to organize your network share folders on line You can save these files inside folders as well as rename and remove files or folders e How to View Files On line Click on a file displayed on the web page The file s data are displayed on the browser If your browser does not support the file format the download window pops up automatically Once the file is downloaded you can open it on your computer e How to Create Folders 1 Enter the folder that you want to create the new folder 2 On the tool bar click on Ej Create Folder 3 Enter the name of the new folder and confirm e Renaming Files or Folders 1 Select the file or folder you want to rename 2 On the tool bar click on mi Rename 3 Enter the new file or folder name and confirm e Deleting Files or Folders 1 Check the file s or folder s you wish to delete 2 On the tool bar click on fil Delete 36 3 A window appears Click on OK to delete the selected file or folder To delete all files and folders click on DM Select All then click on ful Delete e Uploading 1 Ent
Download Pdf Manuals
Related Search