JVC CU-VD3U DVD Recorder User Manual
Contents
1. C 41 F to 95 F cable mm 1 9 10 x 1 1 10 x 3 1 10 environment Storing temperature Excluding power cord 720 C1060 7C Weight Approx 136 g 0 3 Ib 4 F to 140 F Sg pprox 136 g ees For DVD Taserpower 661 nm 0 4 mW wavelength fa output For CD 785 nm 0 6 mW Recommended discs DVD R JVC TDK Verbatim SONY 1 DVD R DL discs can be used when the z 7 burner is connected to a high definition 1 DVD R DL JVC Verbatim Everio camera or a PC DVD RW 2 JVC 2 Dual layer DVD RW discs cannot be used Optimal performance of the burner may not be possible depending on the disc used Using discs of manufacturers for which compatibility has been confirmed is recommended Only 12 cm discs can be used with this burner When connected to an Everio camera Interface USB 2 0 Interface cable USB extension cable Compatible discs for Everio DVD R DVD RW watingy High definition DVD R DVD R DL DVD RW 8 cm discs cannot Everio be used Everio DVD video video only Recording format High definition Data DVD video still image Everio Everio Approx 30 minutes including time taken for finalization Approx 90 minutes of video recorded in fine mode ona 4 7 GB disc Varies depending on conditions such as number of titles High definition For details refer to the instruction manual of the Everio Everio camera Recording time Compatible with all 2006 202. OUTLET DO NOT PLACE YOUR EYES CLOSE TO THE OPENING OF THE DISC TRAY AND OTHER OPENINGS TO LOOK INTO THE INSIDE OF THIS UNIT USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF REFER SERVICING TO QUALIFIED PERSONNEL CLASS 1 LASER PRODUCT REPRODUCTION OF LABELS WARNING LABEL INSIDE OF THE UNIT CAUTION CLASS 3B VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AVOID EXPOSURE TO THE BEAM ATTENTION CLASSE 3B RAYONNEMENT LASER VISIBLE ET INVISIBLE EN CAS D OUVERTURE EXPOSITION DANGEREUSE AU FAISCEAU VORSICHT KLASSE 38 SICHTBARE UND UNSICHTBARE LASERSTRAHLUNG WENN ABDECKUNG GE FFNET NICHT DEM STRAHL AUSSETZEN ADVARSEL KLASSE 38 SYNLIG OG USYNLIG LASERSTRALING VED BNING UNDG UDS ETTELSE FOR STR LING ADVARSEL KLASSE 3B SYNLIG 0G USYNLIG LASERSTRALING NAR DEKSEL PNES UNNG EKSPONERING FOR STRALEN VARNING KLASS 3B SYNLIG OCH OSYNLIG LASERSTRALNING NAR DENNA DEL AR PPNAD STRALEN R FARLIG VARO AVATTAESSA OLET ALTTIINA LUOKAN 3B NAKYVALLE JA NAKYMATTOMALLE LASERSATEILYLLE L KATSO SATEESEEN This unit applies to the standard IEC60825 1 2001 for laser products The socket outlet shall be installed near the equipment and shall be easily accessible ATTENTION This unit contains microcomputers External electronic noise or interference could
3. cause malfunctioning In such cases switch the unit off and unplug the mains power cord Then plug it in again and turn the unit on Take out the disc After checking the disc operate the unit as usual 2 CAUTION To avoid electric shock or damage to the unit first firmly insert the small end of the power cord into the AC Adapter until it is no longer wobbly and then plug the No 8 arger end of the power cord into an AC outlet The mains plug shall remain readily operable Remove the mains plug immediately if the burner functions abnormally f malfunctioning occurs stop using the unit immediately and consult your local JVC dealer Declaration of Conformity for owners in the U S A Model Number CU VD3U Trade Name JVC Responsible party JVC AMERICAS CORP Address 1700 Valley Road Wayne N J 07470 Telephone Number 973 317 5000 This device complies with Part 15 of FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation For owners in the U S A Changes or modifications not approved by JVC could void the user s authority to operate the equipment This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Pa
4. procedures on The screen in step appears when the Everio camera is turned on 1 Display the CREATE DVD screen lt Everio LCD monitor screen gt select SELECT AND CREATE and CREATE DVD press S SELECT AND CREATE amp CREATE DUPLICATE PLAYBACK SELECT AND CREATE select CREATE BY DATE and gt 6 SELECT AND ress 0K P CREATE BY DATE CREATE BY EVENT CREATE BY PLAYLIST SELECT FROM SCENES CREATE DISC B Select the desired dates and i CREATE BY DATE 0CT 12 2008 em 0CT 11 2008 TOTAL 00h18m lt gt O Select ALL and press 9 DVD CREATION LIST ALL CHECK O Select EXECUTE and press ALL READY TO CREATE DVD R EXECUTE RETURN The CREATING NOW screen appears and copying starts CREATING NOW D ELAPSED yo 30 STOP To cancel select STOP and press x Do not turn off the power or remove the USB cable while the CREATING NOW screen is displayed when COMPLETED appears ri Or t mplet in press K to complete copying COMPLETED Copying by Event If the operation and display of your Everio camera differs from the following procedures refer to the instruction manual of your Everio camera For some Everio cameras still images cannot be copied Register images to events beforehand For details refer to the instruction manual of the Everio camera Co
5. 07 and 2008 Everio G models excluding GZ MG21 amp GZ MG31 for direct burning without PC as of December 2007 Updated information is available at www jvc com 17 Memo Memo Printed in Malaysia 2007 Victor Company of Japan Limited 1207MNH SW VM
6. Do not install in any of the following locations Humid location Location of 60 C or above e Location subject to direct sunlight Location where overheating is likely e Dusty or smoky locations Locations subject to oily smoke or steam such as a kitchen counter or beside a humidifier Unstable location Bathroom Dusty places Slanted location ATTENTION On placing the unit Some TVs or other appliances generate strong magnetic fields Do not place such appliances on top of the unit as it may cause picture disturbance When moving the product Remove the power cord and all connecting cables Cleaning Procedure IMPORTANT Be sure to unplug the burner before beginning cleaning Do not use liquid or aerosol cleaners Ensure that no moisture or liquid comes into contact with the drive during cleaning Exterior of the Burner Wipe dirt off with a dry cloth Disc Tray Wipe off dirt with a soft dry cloth Do not touch the lens To clean the lens use commercially available lens cleaning blower for cameras Using a lens cleaning disc will cause malfunction Disc Gently wipe from the inner edge to the outer edge with a soft cloth Storage Make sure that discs are kept in their cases If discs are piled on top of one another without their protective cases they can be damaged Do not put discs in a location where they may be exposed to direct sunlight or in a place where th
7. JVC LYT1840 001C CU VD3U DVD Burner INSTRUC none Graveur de DV MANUEL D UTILISA TION Grabador de DVD MANUAL DE INSTRUCCIONES For tomer Use Enter the Model No and Serial No located on the bottom of the burner below Retain thi information for future reference Model No Serial No This burner enables DVDs of videos recorded with the JVC Hard Disk Camera to be created without using a PC If you want to edit videos recorded with the camera and create your original DVDs use the software provided with the camera for editing and creating DVDs An optional data writing software Power2Go 5 5 Lite can be used for writing data However it cannot be used to edit videos or create DVDs The burner does not include support for Macintosh Dear Customer Thank you for purchasing this burner Before use please read the safety information and precautions contained in pages 2 and 3 to ensure safe use of this product Safety Precautions IMPORTANT In the event that any of the following occur remove the plug and make a request for repair to the dealer Smoke or abnormal odor is emitted Damage from being dropped Water or an object enters inside CAUTION A UNIT IS A CLASS 1 LASER PRODUCT HOWEVER THIS UNIT USES A VISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED BE SURE TO OPERATE THE UNIT CORRECTLY AS INSTRUCTED WHEN THIS UNIT IS PLUGGED INTO THE WALL
8. adapter power cord and USB extension cable supplied with this burner Using accessories other than those supplied may result in electric shock or fire Getting Started Hook the protruding tip with your finger and pull it towards you 2 Take out the USB cable Can be connected to the USB extension cable Placing the Burner H Horizontal orientation Take note of the top and bottom of the burner and place it in the horizontal orientation Do not place any objects on top of the burner H Vertical orientation Face the feet side towards the left and fix securely on the stand Copying to DVD 3 Copy Options E Copying All Files to the DVD cssessseeeeeeeeseeeeeeeseeeneeeeseeeseeeseeeeeee P 9 E Copying Hy Date icscccsscccnctsecscseicseicececcestedeeersetersecedsscedennesestesersuesseneentesvvee P 10 E Copying by Event 2 c ccscceseeeeseeeeeeeeeeeeseeeeeneenaeeeseeeeeeensneeeeeeeseeeneeeeeeee P 12 Playing Back Copied Images To AV jack TT C SB jack Use the AC adapter to power on the Everio Access lamp camera 1 Connect as shown above and turn on each device The screen on the right appears on the Everio camera 2 Switch the TV to an appropriate input Select PLAYBACK and press e Playback begins automatically e To stop select W using the touch sensor When opening closing the disc tray or during copying playback the access lamp lights o
9. d DVD R DVD RW DVD R DL Single sided double layer JVC TDK Verbatim JVC JVC Verbatim SONY Brand Use a commercially available cleaning cloth to wipe the disc gently if there are any fingerprints or dirt Applying too much strength will result in scratches Do not use discs that are scratched DVD R DL discs can be used only when the burner is connected to a high definition Everio camera 2 Connect The power lamp lights Use the AC adapter to in green power on the Everio im Lt y camera CU VD3 To DC jack Power input To DC jack q USB cable Use if necessary Important When the DVD created on this burner cannot be played on other devices play back using this burner t P 8 If you encounter any problems refer to Troubleshooting r P 15 Follow the instructions in the instruction manual of the Everio camera when connecting and operating the Everio camera Open the tray and insert the disc 1 Press the eject 2 Pull out completely button i gt 3 Insert firmly into place O Close the tray O Open the LCD monitor Push in until the tray The Everio camera turns on snaps in Turn the Everio off and on again if the following display remains unchanged Pay attention to the followings Do not topple Do not subject to mechanical shock Do not touch the D
10. e humidity or temperature is high Avoid leaving discs in your car Region Codes Region codes are numbers for restricting DVD video playback The world is separated into six regions and each region is identified by a number If the number for a disc does not match the number for the player the disc cannot be played on the player Changing the region codes You can change the region code to play a DVD that has a different code The code cannot be changed for some playback software When you insert the disc the Caution screen appears on the PC Follow the on screen instructions to change the code The region code for the burner can be changed 5 times only The code set the fifth time becomes the final code so be sure to set a frequently used code Take sufficient care when changing the code Disclaimer JVC accepts no liability whatsoever for loss of data resulting from inappropriate connections or handling Copyrights Duplicating copyright protected material for other than personal use without the permission of the copyright holder is prohibited by copyright law Registered Trademarks and Trademarks Other company and product names mentioned herein are registered trademarks and or trademarks of their respective holders Basic Guide Getting ready to copy to a DVD 1 Get ready a recommended disc Use DVD R DVD RW or DVD R DL disc of the brands listed below DVD R DVD RW and DVD RAM cannot be use
11. m jvc cds enu index_2 jsp This burner can be used as a DVD burner by connecting it to a PC Data DVD can be created by using the disc writing software sold separately USB Power supply outlet Power cord yy AC adapter TSP FE USB cable Specialized USB cable sold separately During connection switch off the power supply of CU VD3 CU VD3 is turned on by inserting the AC adapter into the power supply outlet The supplied USB extension cable cannot be used I Troubleshooting SS CU VD3 Cannot turn the power Make sure the AC adapter and power cord are connected EN on properly This is not a malfunction f the burner is abnormally hot remove the AC adapter and consult your authorized dealer The burner and AC adapter is hot A disc cannot be ejected by pressing the eject button if data is being written to the disc Wait until writing finishes f a disc cannot be ejected with the eject button e Remove and insert the AC adapter then press the eject button again e If the disc cannot be ejected using the above method remove the AC adapter and all other connections Insert a thin rod of about 5 cm into the force eject hole located on the right side of the eject button The disc tray will be ejected for about 1 cm pull out the disc tray manually and take out the disc Cannot open the disc tray Insert the disc with
12. manual of the Everio camera It is impossible to dub Connect CU VD3 to the Everio camera play back using the tho ecm ne playback function of the camera and dub the DVD discs burner ona HDD DVD with the DVD recorder Refer to the instruction manual of recorder the Everio camera E PC f the packet writing software DLA Direct Letter Access has been installed on the PC the disc may not be played back properly due to incompatibility In this case consult the DLA software developer or check Cannot play back out DLA related websites for solutions Confirm the region code and change the region code of CU VD3 The DVD video created on this burner is region free ALL Follow the instructions on the PC screen to change the region code Region code cannot The code cannot be changed for some playback software be changed The region code of CU VD8 can be changed up to 5 times The region code cannot be changed anymore as the code is finalized after changing the fifth time Specifications Perera Rated current 0 9A Power supply AC110 V to 240 V Dimensions mm 141 x 23 x 166 50 Hz 60 Hz WxHxD 5 3 5 x 9 10 x 6 1 2 Input capacity 0 26 A Approx 380 g 0 84 Ibs Output DC 5 2 V 2A Weight Excluding AC adapter and Operating 0 C to 40 C USB extension cable temperature 32 F to 104 F Operating temperature 49 x 28x79 berating 5 C to 35
13. nnect CU VD3 to the Everio camera according to the procedures on P 4 5 The screen in step appears when the Everio camera is turned on 1 Display the CREATE DVD screen lt Everio LCD monitor screen gt select SELECT AND CREATE and 8 D TE press EN CREATE TOGETHER SELECT AND CREATE amp CREATE DUPLICATE pLayeack SELECT AND select CREATE BY EVENT and 6 SELECT AND CF ress 2 p CK CREATE BY DATE CREATE BY EVENT CREATE BY PLAYLIST SELECT FROM SCENES CREATE DISC BY EVENT S Select the desired events and SEARCH EVENT KDVD CREATION LIST ALL DVD1 DVD2 DVD3 CHECK O Select EXECUTE and press ALL READY TO CREATE DVD R EXECUTE RETURN The CREATING NOW screen appears and copying starts CREATING NOW D ELAPSED yo 30 STOP To cancel select STOP and press x Do not turn off the power or remove the USB cable while the CREATING NOW screen is displayed when COMPLETED appears ri Or t mplet in press K to complete copying COMPLETED Creating Data DVD from a PC Important I The following optional accessories are required Specialized USB cable QAM1092 001 e Please purchase from the JVC Accessory Store at http www jvc com http www jve ca Disc writing software Power2Go e Please purchase from the CyberLink homepage http www cyberlink com oe
14. o not place any recording side objects on top Recording and playback may not function properly if the disc is scratched or dirty Preparations To copy images to DVD t P 8 13 completed To play back copied images P 8 Contents Safety Precautions tiite teea aa tiar aiea aaa e iea iais 2 Basic Guide iee e aaan Aa aE A aAa a Ea aar EEKE 4 Getting Started ypsi a a S E a iS 7 Taking out the USB Cable ooo eee eeceseeeseeneeeeeeseeeeeeaeeeeeaesaeeeeesaeecaeeeeeeaeeeeeaeeaeeeas 7 Placing the Burne ticei cccssvesecciscevsaessecciest ccaptesugessuccbunccseseuisresuredsecs dh ccvleveteeieveatas betes 7 Copying to DVD ESEE se sash EE EE E E ES 8 3 Copy OpliONns 2 erwvwessas geste erate cinta ene EE a EE 8 Playing Back Copied Images 8 Copying All Files to the DVD 9 Copying by Date eee 10 Gopying by EVENE r E a seers aaa Aaa paea bees aan aaa a aae a a aha aea aa poem be 12 Creating Data DVD from a PC Optional eeseeseeeeeeieeeisiiereisieriersreriernrienes 14 Troubleshooting csccsccessceseseescerssneescerenteenteesecessenesaneeserssseesorseceeseonsnneencenenee 15 Specifications isc cicsesccccssecnseveesecesensessesesnveaNesessesantesseesechcensevsceseasdescehseasesversesesavcar es 17 Accessories If there are any items missing please consult your authorized dealer AC adapter AP V3U E Instruction manual this manual other printed DVD R blank disc material Use the AC
15. quests for repair and inspection should be made to the dealer e Do not insert metal or combustible objects or pour water or other liquids inside the burner Turn off the power when connecting equipment Remove the plug when the burner will not be used for a prolonged time or prior to cleaning electricity flows through the equipment even when the power is off Do not block the ventilation holes of the burner Do not use where there is condensation Suddenly carrying the burner from a cold location to a hot location may result in the formation of drops which may cause a malfunction or failure Do not cause the burner to vibrate when discs are in Safety Precautions for Accessories When using the AC adapter the power cord and the USB cable be sure to observe the following precautions Failing to do so may result in electric shock fire injury or malfunction Do not insert or remove the plug when your hands are wet Fully insert the plug into the outlet Keep dust and metal objects away from the plug Do not damage the cord Place the cord where it will not trip someone up Do not use when thunder can be heard Do not dismantle Do not use for any product other than this one Do not play the provided CD ROM with an audio player Doing so may damage the circuits or speakers Safety Precautions for Discs Do not use the following discs Cracked discs Deeply scratched discs Installation
16. r blinks in orange AV cable supplied with Everio Gee a a To Audio Video input terminals lt Everio LCD monitor screen gt o D EN CREATE TOGETHER SELECT AND CREATE CREATE DUPLICATE amp PLayBack Select with touch sensor Copying All Files to the DVD If the operation and display of your Everio camera differs from the following procedures refer to the instruction manual of your Everio camera For some Everio cameras still images cannot be copied Connect CU VD3 to the Everio camera according to the procedures on P 4 5 and turn on the Everio camera Press the DIRECT DVD button Select with touch sensor DIRECT DVD O Select EXECUTE and press lt Everio LCD monitor screen gt UNSAVED SCENES READY TO CREATE DVD R EXECUTE RETURN The CREATING NOW screen appears and copying starts CREATING NOW T ELAPSED 3min lt J 30 To cancel select STOP and press Do not turn off the power or remove the USB cable while the CREATING NOW STOP screen is displayed when COMPLETED appears OR t let i press k to complete copying COMPLETED Copying by Date If the operation and display of your Everio camera differs from the following procedures refer to the instruction manual of your Everio camera For some Everio cameras still images cannot be copied Bee CU VD3 to the Everio camera according to the
17. rt 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help For owners in Canada FOR USE WITH MODEL NO AP V3U AC ADAPTER POUR UTILISER AVEC MODELE AP V3U ADAPTATEUR C A This Class B digital apparatus complies with Canadian ICES 003 Cet appareil num rique de la classe B est conforme a la norme NMB 003 du Canada Safety Precautions for the Burner Be sure to observe the following precautions Failing to do so may result in electric shock fire injury or malfunction Do not disassemble dismantle or modify the equipment Re
18. the label facing up Make sure the disc tray is not dirty Make sure the writing surface of the disc is not damaged Make sure the special shaped discs are not used Make sure the audio CD complies with the CD DA standard Copy control CDs cannot be played For CD R or CD RW make sure it is not recorded using the packet write method Reading fails Make sure an appropriate disc is being used t P 4 17 Use discs recommended for the burner P 4 17 Make sure that a new disc is used for DVD R Writing fails Insert the disc with the label facing up Make sure the disc tray is not dirty Make sure the writing surface of the disc is not damaged Make sure the special shaped discs are not used The writing time is too The time taken for writing may be longer depending on the long gt usage environment and conditions of usage This is not a malfunction It is the performance of this burner route ction SO Everio Make sure the USB cable is connected properly Cannot be recognized by the Everio camera Remove and insert the USB cable again Remove and insert the AC adapter of CU VD3 Problems occur Turn off CU VD3 and the Everio camera and then turn on during operation again unane to play DYD Connect CU VD3 to the Everio camera and play back using Burton A other DVD gt the playback function of the Everio camera Refer to the players instruction
Download Pdf Manuals
Related Search