Insignia 10-0499 Handheld TV User Manual
Contents
1. Fe Touren Dec D menu CH Turm scan 6 4 A VW andOK O a VIDEO Press to open the on screen menu Press to go to the next channel in the channel list For more information see Selecting a TV channel on page 9 Press to switch between TV and radio Press to open the auto scan screen Press lt gt A or Yto select an option and to adjust settings in the on screen menu Press to OK confirm selections in on screen menus Press to go to the previous channel in the channel list For more information see Selecting a TV channel on page 9 Press to switch to the video source Sides Fa tem oecinte VOLUME control 2 FOR SERVICE ONLY E VIDEO IN jack PHONE 1 and 2 jacks neno POWER switch POWER ON CHG indicator Rotate to adjust the volume Do not use Connect a standard video device to this jack Connect headphones to these jacks Connect the AC adapter to this jack Slide to turn your TV on or off Lights blue when your TV is turned on Lights red when the built in battery is charging Back Pe tem Diem Antenna jack O Stand In TV mode connect an antenna either the included portable antenna or an external fixed antenna or the cable from your cable or satellite TV to this jack In radio mode connect an antenna to scan radio stations Open to support your TV i2. Fully charge the battery before you use your TV for the first time If you do not fully charge the battery the amount of time the charge lasts is reduced When you charge the battery always disconnect the AC adapter when the charging is complete If you leave the AC adapter connected you will shorten the battery life When you are not using your TV turn it off Basic steps 1 Turn on your TV If you are using the battery power fully charge the battery before you use your TV for the first time See Turning your TV on or off on page 8 and Charging the built in rechargeable battery on page 6 Extend the attached rod antenna to get the best reception possible If you are in a poor reception area you may need to unscrew the rod antenna and connect an HDTV antenna to jack where the rod antenna was connected See Connecting an antenna cable TV or satellite TV on page 7 Make sure that TV is selected as the input source See Selecting the input mode on page 8 Press SCAN on the front of your TV to scan for channels See Automatically scanning for TV channels on page 8 If you move your TV toa different viewing area you need to rescan for channels See Automatically scanning for TV channels using the antenna on page 12 or Automatically scanning for channels using cable TV on page 13 Tune to a channel to watch TV INSIGNIA TV components Front INSIGNIA
3. Balance CO o gt Audio Language 4 English gt Favorites Channel No 8 2 Channel Label WFAA SD av Select Adjust Menu Return 3 Press a or v to highlight Antenna Cable then press or gt to select Antenna VHF and UHF channels or Cable cable or satellite TV channels 2 Press OK ENTER or v to access the menu 4 Press MENU one or more times to return to the previous menu or press EXIT to close the menu Select OK Enter Menu Exit www insigniaproducts com 11 G NS L7HTV INSIGNIA Automatically scanning for TV channels using 4 Press a or v to highlight Auto Channel Search he antenn then press OK ENTER or The following theantenna screen opens with Start to Scan highlighted When you scan for channels your TV searches for channels available in your viewing area and stores the channel information in the channel list When INSIGNIA 3 ie you press CH and CH your TV tunes to the next PA or previous channel in the channel list and skips any channels that were not stored in the list Cable System To automatically scan for TV channels using the Start to Scan antenna 1 Make sure that you have selected the TV signal source For more information see Selecting the TV signal source on page 11 2 Press MENU then press or to highlight Bt TV mode icon The channel menu opens av Select gt Adjust Menu Return INSIGNIA A 5 Press OK ENTER or to start scanning A
4. Weight 1 8 lbs 0 8 kg TV standard ATSC NTSC ae Input DC 9V 1 8A Consumption 10 W max Video composite Inputs outputs Ftype antenna in Headphones mini jack x 2 Operating temperature 41 95 F 5 35 C Legal notices FCC Part 15 This device complies with Part 15 ofthe FCC Rules Operation of this product is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation This equipment has been tested and found to comply within the limits for a class B digital device pursuant to Part 15 ofthe FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment
5. Antenna Cable Antenna Progress screen appears Auto Channel Search n Add Skip Channels INSIGNIA B vs Dy Favorites Channel No 8 2 Channel Label WFAA SD Select OK Enter Menu Exit 3 Press OK ENTER or v to access the menu Menu Exit Exit so Y Antenna Cable 4 Antena gt Your TV scans for analog and digital channels and stores the information in the channel list Auto Channel Search gt When the scan is complete your TV tunes to the Add Skip Channels first channel in the channel list Youcan press MENU or EXIT to exitthe scan but you must run the scan again to create a complete channel list INSIGNIA A Channel No 8 2 Channel Label WFAA SD av Select gt Adjust Menu Return gt Favorites gt gt 12 www insigniaproducts com Automatically scanning for channels using cable TV To automatically scan for channels using cable TV 1 Make sure that you have selected the TV signal source For more information see Selecting the TV signal source on page 11 2 Press MENU then press or to highlight Be TV mode icon The channel menu opens INSIGNIA i o Y Antenna Cable 4 Cable Auto Channel Search Add Skip Channels Favorites Channel No 80 3 Channel Label PBS1DTV Select OK Enter Menu Exit 3 Press OK ENTER or v to access the menu INSIGNIA Sais Antenna Cable 4 Cable gt Add Skip Channels gt Favorites gt Channel No 8 2 gt Channel Label WFA
6. INSIGNIA Adjusting radio options Automatically scanning for radio stations You should scan for radio stations in your area Your TV stores the information in the radio station list To automatically scan for radio stations 1 Press MENU then press or to highlight radio icon The radio menu opens INSIGNIA ZI Y Y Auto Channel Search gt Favorite Stations 4 1 gt Frequency 4 87 5MHz gt Fine Tune CD o gt Audio Only 4 Off gt 4 Select OK Enter Menu Exit 2 Press OK ENTER or v to access the menu Auto Channel Search is highlighted INSIGNIA I x Favorite Stations 1 gt 87 5MHz gt CC gt Off gt 4 Frequency 4 Fine Tune 4 Audio Only 4 av Select gt Adjust Menu Return 3 Press OK ENTER or to start scanning A progress screen appears INSIGNIA 3 a Favorite Stations 3 Frequency 96 30MHz Menu Exit Exit 18 NS L7HTV Your TV scans for radio stations in your area and store the information in the radio station list When the scan is complete your TV tunes to the first station in the radio station list You can press MENU or EXIT to stop the scan Changing radio settings To change radio settings 1 Press MENU then press or to highlight a radio icon The radio menu opens INSIGNIA I Y Auto Channel Search gt Favorite Stations 4 1 87 5MHz gt CD o gt Audio Only 4 Off gt Frequency 4 Fine Tune 4
7. Select OK Enter Menu Exit 2 Press OK ENTER or v to access the menu INSIGNIA a Y Favorite Stations 4 1 gt 87 5MHz gt Fine Tune CD o gt Audio Only 4 Off gt Frequency 4 av Select Adjust Menu Return 3 Press a or v to highlight a setting then press or to adjust the setting You can adjust Auto Channel Search For more information see Automatically scanning for radio stations on page 9 Favorite Stations Press or to select the favorite stations you want You can save up 50 of your favorite radio stations Frequency Press 4 or gt to adjust the station frequency Press or to move 0 1 MHz Fine Tune Press or gt to fine tune the station Audio Only Select On or Off If you select On the display is turned off Press any button to turn the display back on www insigniaproducts com 4 Press MENU one or more times to return to the previous menu or press EXIT to close the menu INSIGNIA Specifications Design and specifications are subject to change The Audio Only function becomes active about three seconds after the TV menu closes Troubleshooting a No picture or sound Picture is OK but there is no sound Sound is OK but there is no color Picture has overlapped images Picture has snow Stripes on picture Picture is pixellated and jumpy Remote control does not work No Signal appears on the screen Picture has a few br
8. Clock Closed Caption option only displays the time when your TV is tuned to a digital channel and time Reset to Factory information is available 4 Select OK Enter Menu Exit 5 Press MENU one or more times to return to the previous menu or press EXIT to close the menu AE SE 2 Press OK ENTER or v to access the menu If a power failure occurs or the TV is unplugged all 3 Press a or vto highlight a setting then press the times are reset A y 4 or gt to adjust the setting You can adjust Adjusting menu settings You can select English Frangals or Espa ol Color Temperature Sets the color To adjust menu settings temperature You can select Cool Normal or 1 Press MENU then press or to highlight lt Warm settings icon The settings menu opens Aspect Ratio Selects the aspect ratio You can select Wide Zoom Cinema or Normal Time For more information see Adjusting time settings on page 16 INSIGNIA ws Re Closed Caption For more information see Using closed captioning on page 16 Reset to Factory Resets all settings to the TV mode Menu Language English factory defaults Select Yes then press Color T OK ENTER olor leniperature Cool 4 Press MENU one or more times to return to the Aspect Ratio Wide previous menu or press EXIT to close the menu Time Closed Caption Reset to Factory 4 Select OK Enter Menu Exit 17 www insigniaproducts com
9. TV automatically changes the Picture Mode to Personal 10 www insigniaproducts com INSIGNIA 4 3 Press a or v to highlight a setting then press Adjusting the sound or to adjust the setting You can adjust Balance Agjusts the balance between the To adjust the sound left and right audio channels 1 Press MENU then press or to highlight Audio Language DTV channels only sound icon The sound menu opens Selects the audio language if multiple TV mode languages are available You can select English French or Spanish MTS SAP Analog TV only You can select E le INSIGNIA a Br Mono Stereo or SAP 4 Press MENU one or more times to return to the previous menu or press EXIT to close the menu Balance A C5553 0 gt een EAS Changing channel settings Selecting the TV signal source To select the TV signal source 1 Press MENU then press or to highlight xXx TV mode icon The channel menu opens INSIGNIA cs Select OK Enter Menu Exit Video mode Antenna Cable 4 Antenna 3 O INSIGNIA SS Auto Channel Search Add Skip Channels Balance CIDO o gt Audio Language 4 English gt Favorites Channel No 8 2 Channel Label WFAA SD 4 Select OK Enter Menu Exit 2 Press OK ENTER or v to access the menu INSIGNIA 5 OD Antenna Cable Antenna i O INSIGNIA 3 agp a Auto Channel Search Add Skip Channels 4 Select OK Enter Menu Exit Radio mode
10. broadcaster To use the EPG 1 In digital TV mode tune to a channel you want to watch 2 Press GUIDE The EPG opens 8 2 WFAA XPress 8 2 WFAA SD 11 15 13 00 21 59 3 Press lt or gt to view information about future programs on the selected channel 4 Press A or v to select the previous or next channel 5 Press GUIDE to close the EPG NS L7HTV Adjusting the picture To adjust the picture 1 Press MENU then press or to highlight 2 picture icon The picture menu opens TV mode INSIGNIALA 9 lt Picture Mode 4 Vivid CO 55 DE m 35 Sharpness 1C 55 Tint CD 0 Color A 55 Select OK Enter Menu Exit Contrast Brightness Video mode INSIGNIA L q Picture Mode 4 Vivid 1C 55 m 45 CD 55 Contrast Brightness Sharpness Tint CD 0 Color 4 Select CO 65 gt OK Enter Menu Exit 2 Press OK ENTER or v to access the menu 3 Press a or v to highlight a setting then press lt or gt to adjust the setting You can adjust Picture Mode Selects the picture mode You can select Vivid Theater Personal or Standard Contrast Adjusts the contrast Brightness Adjusts the brightness Sharpness Adjusts the sharpness Tint Agjusts the tint Color Adjusts the color 4 Press MENU one or more times to return to the previous menu or press EXIT to close the menu If you adjust Contrast Brightness Sharpness Tint or Color your
11. electric shock is present within your TV This label is located on the back of your TV This symbol indicates that there are important operating and maintenance instructions in the literature accompanying your TV Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus Only use attachments accessories specified by the manufacturer Unplug this apparatus during lightning storms or when unused for long periods of time Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped Remote control batteries should not be exposed to excessive heat such as sunshine fire or the like This TV operates on an AC power adapter car adapter or built in rechargeabl
12. highlight 2 settings icon The settings menu opens INSIGNIA 2 Ir Menu Language English Color Temperature Cool Wide Aspect Ratio Time Closed Caption Reset to Factory Select OK Enter Menu Exit 2 Press OK ENTER or v to access the menu INSIGNIA o Y Menu Language 4 English gt Color Temperature 4 Cool gt Wide gt Time gt Aspect Ratio 4 Closed Caption gt Reset to Factory av Select Adjust Menu Return 16 www insigniaproducts com INSIGNIA 3 Press a or v to highlight Time then press Video mode OK ENTER or The following screen appears 2 on INSIGNIA a se INSIGNIA Cao Y a y Menu Language English OSD Duration 4 30 Sec Time Zone 4 Pacific Daylight Savings 4 Off Color Temperature eloTo Aspect Ratio Wide Time Clock 2009 05 10 08 30 Closed Caption Reset to Factory 4 Select OK Enter Menu Exit av Select 4 Adjust Menu Return Radio mode 4 Press a or v to highlight a setting then press lt or gt to adjust the setting You can select p B an OSD Duration Sets the amount of time the INSIGNIA ws a OSD remains open when no buttons are pressed Time Zone Selects the time zone You can Menu Language English select Pacific Alaska Hawaii Atlantic Color Temperature Cool Eastern Central or Mountain A nt Ma Daylight Savings Turns the daylight saving spect inate ie feature on or off Time Clock Displays the date and time The
13. the mast and supporting structure grounding of the lead in wire to an antenna discharge unit size of grounding conductors location of the antenna discharge unit connection to grounding electrodes and requirements for the grounding electrode O Antenna lead in wire Grounding clamp Antenna discharge unit Grounding conductors Ground clamps Power service grounding electrode system O Electric service equipment Note to CATV system installer Article 820 of the National Electrical Code ANSI NFPA No 40 provides guidance for correct grounding Specifically it states that the cable ground must be connected to the grounding system of the building as close to the point of cable entry as practical Condensation Moisture will form on the TV if the TV is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly When this happens the TV s performance may be impaired To prevent this let the TV stand in its new surroundings for about an hour before switching it on or make sure that the room temperature rises gradually Condensation may also form during the summer if the TV is exposed to the breeze from an air conditioner In such cases change the location of the TV Mobile telephone warning To avoid interference with your TV picture and sound operating problems or even damage keep your cordless and cellular telephones away from the TV End of life directives Y
14. to the radio Automatically scanning for TV channels You should scan for TV channels in your area Your TV stores the information in the channel list To automatically scan for TV channels 1 Make sure that you have a TV antenna cable TV or satellite TV connected to your TV 2 Press SCAN on the front of your TV The following screen opens Do you want to proceed auto scan Ea 4 Select OK Confirm Menu Exit www insigniaproducts com INSIGNIA 3 Press or to select Yes then press OK ENTER 3 Press lt or to select Yes then press OK ENTER to start the scan If you do not want to scan for to start the scan If you do not want to scan for channels select No A status screen appears radio stations select No A status screen appears during the scan during the scan Favorite Stations 3 Frequency 96 30MHz Menu Exit Exit Menu Exit Exit Your TV scans for channels in your area and Your TV scans for radio stations in your area and stores the information in the channel list When store the information in the radio station list the scan is complete your TV tunes to the first When the scan is complete your TV tunes to the channel in the channel list first station in the radio station list You can press MENU or EXIT to exit the scan but you You can press MENU or EXIT to exit the scan but you must run the scan again to create a complete radio must run the scan again to create a complete radio station list st
15. A SD gt av Select Adjust Menu Return 4 Press a or v to highlight Auto Channel Search then press OK ENTER or The following screen opens with Cable System highlighted INSIGNIA 5 9 ly Cable System Start to Scan ay Select lt gt Adjust Menu Return INSIGNIA 5 Press or to select the cable system you use AUTO STD IRC or HRC If you are not sure select AUTO 6 Press a or v to highlight Start to Scan then press OK ENTER or to start scanning A progress screen appears INSIGNIA GI B x y Menu Exit Exit Your TV scans for analog and digital channels and stores the information in the channel list When the scan is complete your TV tunes to the first channel in the channel list You can press MENU or EXIT to exit the scan but you must run the scan again to create a complete channel list Hiding TV channels You can hide TV channels in the channel list When you press CH or CH your TV skips hidden channels You can still tune to hidden channels using the number buttons To hide TV channels 1 Make sure that you have scanned for TV channels For more information see Automatically scanning for TV channels using the antenna on page 11 or Automatically scanning for channels using cable TV on page 12 2 Press MENU then press or to highlight y TV mode icon The channel menu opens INSIGNIA o Y Antenna Cable Auto Channel Search Add Skip Channels Favo
16. User Guide INSIGNIA 7 Portable Digital TV NS L7HTV 10A INSIGNIA Important safety instructions cece cece cece ence nee eenes 1 WANN rennen een ee 1 Cautions rr AA RR DARA 2 NEFDAUEEIEN a a deis 3 Package Contents ee 3 What you need to know before you start ooooocooccocmoo 3 About reception ic rara card ai 3 About available TV channels and radio stations 3 About conserving battery Power 0 cece cece cence ence eens 3 Basic steps este ters ee ee ee a een ae sees 3 IV GOMpONCNS sera terra ker 4 FONE os ea 4 A 4 A er CAIDA ERNER E EARE DAEN ERA 5 Remote control as er ici di 5 Replacing the remote control battery ccc cece eee eens 6 Making connections u een 6 Connecting the car adapter cece e cece cece een e nen ee nes 6 Charging the built in rechargeable battery ooooo 6 Connecting an antenna cable TV or satellite TV 7 Connecting a standard video device cece cece cence nena 7 Understanding the basics u ee 8 Turning your TV ON or off aan 8 Selecting the input mode ccc cece eect acc 8 Automatically scanning for TV channels ooooooccococomom 8 Automatically scanning for radio stations oooommmmmo 9 Adjusting a radio station s frequency ccc cece cece ences 9 Selecting a IV channel u 9 Selecting a radio station ccc cece cece tence teen ee nen 10 Adju
17. al cable between the Antenna Standard video device jack on the back of your TV and an antenna cable TV or satellite TV jack 3 Turn on your TV then press INPUT on the remote control to open the Input Source list y 4 Press INPUT repeatedly or press a or v to select VIDEO then press OK ENTER You can also press VIDEO to select the video device HDTV antenna 3 Turn on your TV then press INPUT on the remote control to open the Input Source list 4 Press INPUT repeatedly or press a or v to select TV then press OK ENTER You can also press TV to view TV INSIGNIA Understanding the basics Turning your TV on or off To turn your TV on or off Slide the POWER switch PN o N6 NIDO POWER switch o o 440 Y3MOd NO POWER ON CHG indicator le SHO NO U3MOd POWER switch POWER ON CHG position indicator ON POWER OFF On Blue o oo oo ON POWER OFF Off Charging Because your TV can be powered by the built in rechargeable battery there is no standby mode Your TV is either on or off NS L7HTV Selecting the input mode To select the input mode 1 Press INPUT to open the Input Source list then press INPUT repeatedly or press a or v to select an input source 2 Press OK ENTER You can press TV to watch TV You can press VIDEO to select a connected video device You can press FM to listen
18. ation list You can also scan for TV channels using the You can also scan for TV channels using the on screen channel menu For more information see on screen channel menu For more information see Automatically scanning for TV channels using the Automatically scanning for TV channels using the antenna on page 12 or Automatically scanning for antenna on page 12 or Automatically scanning for channels using cable TV on page 13 channels using cable TV on page 13 You can save up to 50 of your favorite radio stations Automatically scanning for radio stations o j Adjusting a radio station s frequency To automatically scan for radio stations 1 Make sure that you have the rod antenna To adjust a radio station s frequency connected to your TV 1 Make sure that you have scanned for radio 2 Press SCAN on the front of your TV The stations following screen opens 2 Tuneto a radio station then press or to adjust the station frequency Each time you press or the frequency moves 0 1 MHz Your TV automatically saves the latest selected frequency Do you want to proceed auto scan Selecting a TV channel To select a TV channel To go to the next or previous channel in the channel list press CH and CH Pressing one of these buttons skips any channels that are not in the channel list The channel list was created when you scanned for channels To select an analog or main digital channel 4 Se
19. e battery Make sure that the input voltage of the AC adapter is compatible with the local voltage Otherwise the AC adapter and the TV may be damaged To avoid electric shock do not touch the AC adapter with wet hands INSIGNIA When connecting with an automobile cigarette lighter adapter make sure that the input voltage of the adapter is identical with the car voltage Unplug the AC adapter from the outlet when the TV will not be used for an extended period of time Hold the plug while unplugging the AC adapter Do not pull on the power cord Using headphones To avoid hearing damage caused by a sudden increase in volume keep the volume at the lowest level before playback then adjust it to a comfortable level Keep the volume at a moderate level to protect your ears To avoid trac accidents never wear headphones when driving a car or riding a motorcycle or bicycle 16 The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus Warnings Electric shock hazard To reduce the risk of fire or electric shock do not remove any cover or expose the device to rain or moisture No user serviceable parts are inside Refer servicing to qualified service technicians Lightning For added protection for your device receiver during a lightning storm or when it is left unattended and unused for long periods of time un
20. ed viewing uses only unless otherwise authorized by Macrovision Corporation Reverse engineering or disassembly is prohibited Two year limited warranty Insignia Products Insignia warrants to you the original purchaser of this new NS L7HTV 10A Product that the Product shall be free of defects in the original manufacture of the material or workmanship for a period of two 2 years from the date of your purchase of the Product Warranty Period This Product must be purchased from an authorized dealer of Insignia brand products and packaged with this warranty statement This warranty does not cover refurbished Product If you notify Insignia during the Warranty Period of a defect covered by this warranty that requires service terms of this warranty apply How long does the coverage last The Warranty Period lasts for 2 years 730 days from the date you purchased the Product The purchase date is printed on the receipt you received with the Product What does this warranty cover During the Warranty Period ifthe original manufacture of the material or workmanship of the Product is determined to be defective by an authorized Insignia repair center or store personnel Insignia will at its sole option 1 repair the Product with new or rebuilt parts or 2 replace the Product at no charge with new or rebuilt comparable products or parts Products and parts replaced under this warranty become the property of Insig
21. haracter You can use as many as seven characters 6 Press MENU one or more times to return to the previous menu or press EXIT to close the menu Using closed captioning To use closed captioning 1 Press MENU then press or to highlight 2 settings icon The settings menu opens English INSIGNIA A Menu Language Color Temperature Cool Aspect Ratio Wide Time Closed Caption Reset to Factory 4 Select OK Enter Menu Exit 2 Press OK ENTER or v to access the menu INSIGNIA Ca Y Menu Language English Aspect Ratio Wide Time Reset to Factory gt av Select Adjust gt Color Temperature Cool gt gt gt Menu Return 3 Press a or v to highlight Closed Caption then press OK ENTER or The following screen appears INSIGNIA 3 wage y CC Mode Off Basic Advanced Service1 Menu Return av Select Adjust NS L7HTV 4 Press aor v to highlight a setting then press lt or gt to adjust the setting You can select CC Mode Turns closed captioning on or off Basic Selects the closed captioning mode You can select Off CC1 through CC4 or Text1 through Text4 Advanced DTV only Select the DTV closed captioning mode You can select Off or Service1 through Service6 5 Press MENU one or more times to return to the previous menu or press EXIT to close the menu Adjusting time settings To adjust time settings 1 Press MENU then press or to
22. hen you select a channel that has a check mark next to it and press OK ENTER the channel is deleted from the list To select a favorite channel 1 Press FAVORITE one or more times until the Favorite List opens 80 3 80 4 80 5 80 6 80 7 80 8 PBS1DTV PBS2DTV PBS3DTV PBS4DTV PBS5DTV PBS6DTV www insigniaproducts com INSIGNIA 2 Press a or v to highlight a channel If the list has more than one page press or to scroll through the pages 3 Press FAVORITE to close the list and tune to the channel you selected Adding a channel label You can add a label to a channel to make it easier to identify To add a channel label 1 Tuneto a channel you want to label 2 Press MENU then press or to highlight Re TV mode icon The channel menu opens INSIGNIA o Y Antenna Cable Auto Channel Search Add Skip Channels Favorites Channel No 80 3 Channel Label PBS1DTV Select Menu Exit OK Enter 3 Press OK ENTER or v to access the menu INSIGNIA G Antenna Cable gt Auto Channel Search gt Add Skip Channels gt Favorites gt Channel No 4 80 3 gt Channel Label PBS1DTV gt av Select 4 Adjust Menu Return 4 Press a or v to highlight Channel Label then press OK ENTER or The following screen appears INSIGNIA LA so Menu Return av Select Adjust 15 5 Press or gt to move from character to character and press a or v one or more times to select a c
23. ied for lengthy periods burn in INSIGNIA This warranty also does not cover Damage due to incorrect operation or maintenance Connection to an incorrect voltage supply Attempted repair by anyone other than a facility authorized by Insignia to service the Product Products sold as is or with all faults Consumables such as fuses or batteries Products where the factory applied serial number has been altered or removed REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY INSIGNIA SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT INCLUDING BUT NOT LIMITED TO LOST DATA LOSS OF USE OF YOUR PRODUCT LOST BUSINESS OR LOST PROFITS INSIGNIA PRODUCTS MAKES NO OTHER EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT ALL EXPRESS AND IMPLIED WARRANTIES FOR THE PRODUCT INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE AND NO WARRANTIES WHETHER EXPRESS OR IMPLIED WILL APPLY AFTER THE WARRANTY PERIOD SOME STATES PROVINCES AND JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE Con
24. ight or dark spots Make sure that your TV is turned on You may not be getting a signal Follow the advice on page 3 Remember to run the channel scan if you haven t done so already Increase the volume Check the program s color features The broadcast may be in black and white Adjust the color For more information see Adjusting the picture on page 10 Make sure that the antenna is installed correctly If not adjust the antenna towards the broadcasting station The picture will have snow if the broadcast is analog and the signal is weak Check for interference from other electronic devices such as radios and televisions Keep magnetic or electronic devices away from your TV You are not getting a strong enough signal Try moving the antenna to another location or using a stronger antenna Remove obstacles between the remote control and your TV Install fresh batteries If TV is selected as the input source make sure that the antenna or cable TV is firmly connected If VIDEO is selected as the input source make sure that the AV cable is firmly connected to your TV Reception may be poor To improve reception Follow the advice on page 3 A few bright or dark dots on an LCD screen are normal It does not affect the operation of your TV without notice Weight and dimensions shown are approximate values only LCD panel 7 inch LCD screen Dimensions 8 5 x 6 3 X 1 5 in 21 5 x 16 x 3 9 cm
25. into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help FCC warning Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void the user s authority to operate this equipment DHHS and FDA safety certification This product is made and tested to meet safety standards of the FCC requirements and compliance with safety performance of the U S Department of Health and Human Services and also with FDA Radiation Performance Standards 21 CFR Subchapter J Canada ICES 003 statement This Class B digital apparatus complies with Canadian ICES 003 Standard Television Receiving Apparatus Appareil de r ception t l vision ordinaire Canada BETS 7 NTMR 7 RSS 310 statement To reduce potential radio interference to other users the antenna type and its gain should be so chosen that the equivalent isotropically radiated power e i r p is not more than that permitted for successful communication 19 INSIGNIA Macrovision statement 20 This product incorporates copyright protection technology that is protected by method claims of certain U S patents and other intellectual property rights owned by Macrovision Corporation and other rights owners Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limit
26. lect OK Confirm Menu Exit press the number buttons for the channel To select a digital sub channel press the number buttons for the main digital channel press O then press the number for the digital sub channel To tune to the last viewed channel press RECALL www insigniaproducts com INSIGNIA Selecting a radio station To select a radio station e Press CH and CH Pressing one of these buttons skips any radio stations that are not in the radio channel list The radio station list was created when you scanned for radio stations Adjusting the volume To adjust the volume Rotate the u VOLUME control on the right side of your TV Displaying additional information You can view current status information about TV channels The following task shows an example of information about a digital TV channel To display additional information 1 In digital TV mode tune to a channel you want to watch 2 Press INFO Program information appears if available WFAA XPress 8 2 704x480 AUDIO 1 1 L R 2004 11 15 14 41 13 00 21 59 No Event Information 3 Press INFO again to close the display Using the electronic program guide Your TV has an electronic program guide EPG that supplies information such as program lists and programs times In addition detailed information about the program is often available in the EPG The availability and the amount of program details will vary depending on the
27. n an upright position Remote control The supplied rod antenna comes already attached to your TV If you want to connect an external antenna you can detach the rod antenna and connect the external antenna to the Antenna jack Your TV will perform best with an HDTV antenna which can be purchased separately The remote control battery comes pre installed The first time you use the remote control remove the plastic sheet from the bottom of the battery to activate the remote OTS eu eco 6 7 HE PERA CS S D 7 O INSIGNIA RC 263 O Numbers O GUIDE G OK ENTER 2 mro menu zoom picture FM 2 input QO RECALL Oe OD a ray cH 13 co EXIT 2 w 18 FAVORITE 19 vipeo INSIGNIA s Souten Dect Press to enter channel numbers Press to the DTV electronic program guide For more information see Using the electronic program guide on page 10 Press to access a menu or confirm selections in the on screen menu Press to display information about the video input source Press to open the on screen menu Press to select the aspect ratio You can select Wide Zoom Cinema or Normal Press to select the picture mode You can select Vivid Theater Personal or Standard Press to switch to radio mode Press to select the video input mode For more information see Selecting the input mode on page 8 Press to go to the last viewed cha
28. na to adjust the reception If the rod antenna does not provide good reception you may need to connect an HDTV antenna such as rabbit ears or cable or satellite TV If you scan for TV channels or radio stations when your TV is experiencing poor reception you may not be able to tune to all the available channels or stations About available TV channels and radio stations When you use your TV for the first time you need to scan for TV channels and radio stations in your area Your TV remembers the channel and station information from the last scan and tries to tune to the stored channels and stations When you move your TV to a different area make sure that you scan for TV channels and radio stations before you try to tune to channels or stations Make sure that your TV has good reception before you scan for channels or stations Poor reception during a scan prevents your TV from finding all the available TV channels and radio stations INSIGNIA If you know a local channel is available but you cannot tune to the channel try scanning for channels again If you see a blue screen your TV is not receiving a About signal Make sure that the antenna or cable TV cable is connected securely and that your TV is in a good area for reception conserving battery power Your TV has a built in rechargeable battery that can supply several hours of power However to get the most out of your battery
29. nia and are not returned to you If service of Products or parts are required after the Warranty Period expires you must pay all labor and parts charges This warranty lasts as long as you own your Insignia Product during the Warranty Period Warranty coverage terminates if you sell or otherwise transfer the Product How to obtain warranty service If you purchased the Product at a retail store location take your original receipt and the Product to the store you purchased it from Make sure that you place the Product in its original packaging or packaging that provides the same amount of protection as the original packaging If you purchased the Product from an online web site mail your original receipt and the Product to the address listed on the web site Make sure that you put the Product in its original packaging or packaging that provides the same amount of protection as the original packaging Where is the warranty valid This warranty is valid only to the original purchaser of the product in the United States Canada and Mexico What does the warranty not cover This warranty does not cover Customer instruction Installation Set up adjustments Cosmetic damage Damage due to acts of God such as lightning strikes Accident Misuse Abuse Negligence Commercial use Modification of any part of the Product including the antenna Plasma display panel damaged by static non moving images appl
30. nnel Press to select digital sub channels For more information see Selecting a TV channel on page 9 Press to go to the next channel in the channel list For more information see Selecting a TV channel on page 9 Press to select an option and to adjust settings in the on screen menu Press to go to the previous channel in the channel list For more information see Selecting a TV channel on page 9 Press to turn closed captioning on or off For more information see Using closed captioning on page 16 Press to close the on screen menu Press to switch to TV mode Press to open the favorite channel list For more information see Setting up the favorite channel list on page 14 Press to switch to video mode INSIGNIA Replacing the remote control battery Ma king connections The first time you use the remote control remove the Connecting the AC adapter plastic sheet from the bottom of the battery to 1 Plug the AC adapter into the DC IN 9V jack on the left side of your TV To replace the remote control battery 1 Gently insert a fingernail in the grove marked 1 then gently pull the battery holder in the direction marked 2 2 Remove the old battery 3 Place the new battery in the holder with the facing up Keep the holder horizontal so the battery does not fall out 2 Plug the other end ofthe AC adapter into a power outlet Always turn off your TV before you
31. ot charge if your TV is on 2 Connectthe AC adapter or car adapter to the DC IN 9V jack on the side of your TV and to a power outlet or car cigarette lighter socket Battery charging begins automatically and the POWER ON CHG indicator lights red When charging is complete the indicator turns off INSIGNIA 3 When charging is complete disconnect the AC Connecting a standard video device adapter r To connect a standard video device ETT disconnect the AC adapter or car adapter until the A A nee POWER ON CHR indicator turns off adapter is unplugged 2 Connectan AV cable between the VIDEO IN jack Notes a a aaa jacks on the video device The battery indicator 1 appears on the screen when the power is running low Charge the built in rechargeable battery with a surrounding temperature of 41 F and 95 F 5 and 35 C The built in battery may get warm when you are charging it or operating your TV This is not defect Batteries contain chemical substances so they should be disposed of correctly Follow the hazardous waste guidelines in you area Connecting an antenna cable TV or satellite TV If you are in an area with weak TV signals you may need an HDTV antenna to improve reception Unscrew the rod antenna then connect an HDTV antenna to this jack To connect an antenna cable TV or satellite TV 1 Make sure that your TV is turned off and the AC o O adapter is unplugged Sosos 2 Connecta coaxi
32. our TV contains tin lead solder and a fluorescent lamp containing a small amount of mercury Disposal of these materials may be regulated for environmental reasons Your TV also contains material that can be recycled and reused For disposal or recycling information contact your local authorities or the Electronic Industries Alliance at www eia org to find a recycler in your area Non active pixels The LCD panel contains almost 3 million thin film transistors which provide exceptionally sharp video quality Occasionally a few non active pixels may appear on the screen as a fixed blue green or red point These non active pixels do not adversely affect the performance of your TV and are not considered defects Introduction Congratulations on your purchase of a high quality Insignia product Your NS L7HTV 10A represents the state ofthe art in LCD TV design and is designed for reliable and trouble free performance Package contents 7 portable digital TV Remote control with battery installed e AC adapter AV cable Car adapter e User Guide Quick Setup Guide What you need to know before you start About reception Your TV is designed to be portable Because you will probably be moving your TV from place to place you need to consider the following Clear TV and radio reception depends on your location Make sure that you extend the rod antenna that comes pre installed on your TV Rotate the anten
33. plug it from the power outlet and disconnect any antenna or cable system This helps prevent property damage and personal injury from lightning and power line surges Power lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits or where it can fall into such power lines or circuits When installing an outside antenna system extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal Handling the LCD panel Your TV s screen is made of glass Do not drop your TV or hit jolt or press hard against the LCD panel If the screen breaks be careful of broken glass If the LCD panel is broken make absolutely sure that you do not touch the liquid in the panel This may cause skin inflammation If the liquid gets in your mouth immediately gargle rinse and consult with your doctor Also if the liquid gets in your eyes or touches your skin consult with your doctor after rinsing for at least 15 minutes or longer in clean water INSIGNIA Replacement parts When replacement parts are required make sure that the service technician uses replacement parts specified by the manufacturer that have the same characteristics as the original part Unauthorized substitutions may result in fire electric shock personal injury or other hazards Safety check After completing any service or repair to thi
34. ress OK ENTER or v to access the menu INSIGNIA 3 us Be Antenna Cable 4 Auto Channel Search Add Skip Channels Channel No 80 3 gt Channel Label PBS1DTV gt av Select 4 Adjust Menu Return 3 Press a or v to highlight Favorites then press OK ENTER or The following screen appears INSIGNIA 2 o Y No Program Name Favorite 80 3 PBS1DTV 80 4 PBS2DTV 80 5 PBS3DTV 80 6 PBS4DTV 80 7 PBS5DTV 80 8 PBS6DTV OK Select Menu Return 14 www insigniaproducts com 4 Press a or v to highlight a channel you want to add to the favorite channel list then press OK ENTER If the favorite channel list has more than one page press or to scroll through the pages A check mark appears next to the channel and the channel is added to the favorite channel list INSIGNIA 3 g Favorite Program Name PBS1DTV PBS2DTV PBS3DTV PBS4DTV PBS5DTV PBS6DTV OK Select Menu Return Channels that were skipped when you scanned for channels are greyed in the list and cannot be selected Ifyou have added a label to a channel the channel label appears next to the channel number in the favorite channel list For more information see Adding a channel label on page 15 5 Repeat Step 4 to add additional channels to the list 6 Press MENU one or more times to return to the previous menu or press EXIT to close the menu To delete a channel from the favorite channel list repeat this task In Step 4 w
35. rites Channel No 80 3 Channel Label PBS1DTV Select OK Enter Menu Exit www insigniaproducts com 13 INSIGNIA 3 Press OK ENTER or v to access the menu Cable INSIGNIA y Antenna Cable 4 gt Auto Channel Search gt Favorites gt Channel No 80 3 gt Channel Label PBS1DTV gt av Select Adjust Menu Return 4 Press a or Y to highlight Add Skip Channels then press OK ENTER or The following screen appears INSIGNIA 7 o Y Program Name Show PBS1DTV PBS2DTV PBS3DTV PBS4DTV PBS5DTV PBS6DTV OK Select Menu Return 5 Press a or v to highlight the channel you want to hide then press OK ENTER If the channel list has more than one page press or to scroll through the pages Ifthe channel has a check mark next to it the channel is in the channel list If you delete a channel the check mark disappears If you add a channel a check mark appears 6 Press MENU one or more times to return to the previous menu or press EXIT to close the menu NS L7HTV Setting up the favorite channel list You can create a favorite channel list to make it easier to tune to your favorite channels To set up the favorite channel list 1 Press MENU then press or to highlight Xx TV mode icon The channel menu opens do INSIGNIA 7 Antenna Cable Auto Channel Search Add Skip Channels Favorites Channel No 80 3 Channel Label PBS1DTV Select Menu Exit OK Enter 2 P
36. s device ask the service technician to perform routine safety checks to determine that your TV is in correct operating condition Power source Operate your TV only from the type of power source indicated on the marking label If you are not sure of the type of power supplied to your home consult an electrician or your local power company Cautions Damage requiring service Unplug this TV from the power outlet and refer servicing to qualified service personnel under the following conditions When the power supply cord or plug is damaged or frayed If liquid has been spilled or objects have fallen into your TV If your TV has been exposed to rain or water If your TV does not operate normally by following the operating instructions Adjust only those controls that are covered by the operating instructions because incorrect adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore your TV to its normal operation If your TV has been dropped or damaged in any way When your TV exhibits a distinct change in performance Outdoor antenna grounding If an outside antenna or cable system is connected to your TV make sure thatthe antenna or cable system is grounded to provide some protection against voltage surges and built up static charges Article 810 of the National Electrical Code ANSI NFPA No 70 provides information with respect to correct grounding of
37. sting the volume cece cece cece cee corro 10 Displaying additional information 0c eee eee eee eens 10 Using the electronic program guide ccc cece cence een ee 10 Adjusting the picture lt A AAA 10 Adjusting the sound score lcd 11 Changing channel settings cece cece cece eee ences 11 Selecting the TV signal source cece cece cece nee een nc 11 Automatically scanning for TV channels using the antenna 12 Automatically scanning for channels using cable TV 13 Hiding TV channels ns nn a aa 13 Setting up the favorite channel list o ooooommmmoom 14 Adding a channel label 0 ese c cece eee eee e ee eneeeees 15 Using closed Captioning oooooooooccorcrcrccnccorcoo ccoo 16 INSIGNIA Adjusting time settings ooooooococconccconacco naco 16 Adjusting menu settings cece cece cece cece nee ee eee een 17 Adjusting radio Options cc ccc cece ence eee e eee enaees 18 Automatically scanning for radio stations oo oooooomo 18 Changing radio settings u ee 18 Troubleshooting ee 19 Specifications ee eden ans 19 LeGal NOUCES seele 19 Two year limited warranty cece eee cence eee e carro 21 Important safety instructions CAUTION A RISK OF ELECTRIC SHOCK A DO NOT OPEN N Qu AWN 10 11 12 13 14 15 This symbol indicates that dangerous voltage constituting a risk of
38. tact Insignia For customer service please call 1 877 467 4289 www insigniaproducts com Distributed by Best Buy Purchasing LLC 7601 Penn Avenue South Richfield Minnesota U S A 55423 3645 2010 BBY Solutions Inc All rights reserved INSIGNIA is a trademark of BBY Solutions Inc Registered in some countries All other products and brand names are trademarks of their respective owners 21 INSIGNIA 22 INSIGNIA 23 INSIGNIA www insigniaproducts com 877 467 4289 Distributed by Best Buy Purchasing LLC 7601 Penn Avenue South Richfield MN USA 55423 3645 O 2010 Best BBY Solutions Inc All rights reserved INSIGNIA is a trademark of BBY Solutions Inc Registered in some countries All other products and brand names are trademarks of their respective owners ENGLISH 10 0499
39. unplug the AC adapter or you 4 Slide the battery holder into the battery may damage your TV compartment Make sure that the holder is inserted securely Connecting the car adapter To connect the car adapter Batteries contain chemical substances so they should 1 Plug the car adapter into the DC IN 9V jack on be disposed of correctly Follow the hazardous waste the left side of your TV guidelines in you area 2 pl h h dofth d h Danger of explosion if battery is incorrectly replaced ug the ot erend ort le car a apter into the Replace only with the same or equivalent type cigarette lighter socket in your car Incorrect use of batteries can cause electrolyte leakage and will corrode the compartment or cause the batteries to burst Always turn off your TV before you unplug the car adapter or you may damage your TV To avoid traffic accidents never wear headphones when driving a car or riding a bicycle Do not touch the adapter with wet hands Do not get liquid on the adapter Never operate your TV or view programs while operating an automobile or other vehicle Doing so is illegal in many jurisdictions Charging the built in rechargeable battery The built in battery needs to be fully charged before you use it for the first time The built in battery can power the TV for operation outdoors or in a place with no outlets To charge the built in rechargeable battery 1 Make sure that your TV is turned off The battery will n
Download Pdf Manuals
Related Search