iLive NS108B Speaker System User Manual
Contents
1. Control Definitions 1 Skip Search Buttons Press the Skip Search Buttons to skip from one track to the next or previous track on a docked Zune 2 Power Play Pause Button Press the Power Button to turn the unit on Press and hold the Power Button to turn the unit off Press the Play Pause Button to play or pause a docked Zune 3 Volume Buttons Press the Volume Buttons to adjust the volume of audio output from the unit 4 Dock Use the Dock to connect a Zune to the unit 5 Battery Compartment Requires 2 AAA Batteries not included 6 Clock Set Button Press the Clock Set Button to adjust the time and date when setting the time 7 EQ Clock Button Press the EQ Clock Button twice with the unit powered off to adjust the clock Press the EQ Clock Button to cycle through the available preset equalizer settings 8 Display The display shows the time 9 Video Output Use the Video Output to connect the unit to a television 10 Auxiliary Output Use the Auxiliary Output to connect the unit to an external stereo system 11 Auxiliary Input Use the Auxiliary Input to connect an MP3 player or other audio source to the unit Location of Controls NE 10 Control Definitions 12 13 14 15 16 17 18 Skip Search Buttons Press the Skip Search Buttons to skip from one track to the next or previous track on a docked Zune Directional Buttons2. Step 1 Match the Zune s dock connector with the dock connection on the unit Step 2 The Zune should be facing the same direction as the unit Step 3 Slide the Zune onto the unit s dock connection Step 4 Audio played from the Zune will now be heard through the speakers of the unit Playing a Docked Zune Step 1 Connect a Zune to the Docking Station Step 2 Press the Power Button to turn the unit on Step 3 Press the Play Pause Button on the remote to begin playing the docked Zune Step 4 Press the Volume Buttons to increase or decrease the volume of the unit Step 5 Press the Skip Up and Skip Search Buttons to skip tracks Press and hold the Skip Up and Skip Search Buttons to search through individual tracks Setting the Clock Step 1 Press and hold the Power Button to turn the unit off Step 2 Press the EQ Clock Button twice Step 3 Press the Clock Set Button to adjust the month Step 4 Press the EQ Clock Button to set the selected month Step 5 Press the Clock Set Button to adjust the date Step 6 Press the EQ Clock Button to set the selected date Step 7 Press the Clock Set Button to adjust the hour Step 8 Press the EQ Clock Button to set the selected hour Step 9 Press the Clock Set Button to adjust the minute Step 10 Press the EQ Clock Button to set the selected minute Step 11 Press the Clock
3. 8 Accessories Do not place this product on an unstable cart stand tripod bracket or table The product may fall causing serious injury to a child or adult and serious damage to the product Use only with a cart stand tripod bracket or table recommended by the manufacturer or sold with the product Any mounting of the product should follow the manufacturer s instructions and should use a mounting accessory recommended by the manufacturer 9 A product and cart combination should be moved with care Quick stops excessive force and uneven surfaces may cause the appliance and cart combination to overturn See figure 10 Ventilation Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating and these openings must not be blocked or covered The openings should never be blocked by placing the product on a bed sofa rug or other similar surface This product should not be placed in a built in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer s instruction have been adhered to Power Sources This product should be operated only from the type of power source indicated on the marking label If you are not sure of the type of power supply to your home consult your product dealer or local power company For products intended to operate from battery power or other sources refer to the op
4. service personnel WARNING Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment WARNING Danger of explosion if the remote control s batteries are incorrectly installed Replace only with the same or equivalent battery WARNING The remote control s button cell battery contains mercury Do not put in the trash instead recycle or dispose of as hazardous waste WARNING Use of this unit near fluorescent lighting may cause interference regarding use of the remote If the unit is displaying erratic behavior move away from any fluorescent lighting as it may be the cause Do not mix old and new batteries Do not mix alkaline standard carbon zinc or rechargeable ni cad ni mh etc batteries NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined
5. Enter Button Use the Directional Buttons and Enter Button to navigate through the docked Zune and make selections Home Button Use the Home Button to return to a docked Zune s home screen Back Button Press the Back Button to move backwards through a docked Zune s menus Power Play Pause Button Press the Power Button to turn the unit on Press and hold the Power Button to turn the unit off Press the Play Pause Button to play or pause a docked Zune Volume Buttons Press the Volume Buttons to adjust the volume of audio output from the unit EQ Clock Button Press the EQ Clock Button twice with the unit powered off to adjust the clock Press the EQ Clock Button to cycle through the available preset equalizer settings 11 Ne Parts Information Address 2116 Carr Street St Louis MO 63106 Phone 1 314 621 2881 Fax 1 314 588 1805 Email partsinfo dpi global com Service Information Address 2110 Carr Street St Louis MO 63106 Phone 1 314 657 2364 Fax 1 314 588 1805 Email customerservice ZLiveAudio com Website www ZLiveAudio com Version To download this Instruction Manual in English Spanish or French visit the Support section at www ZLiveAudio com Para descargar este manual de instrucci n en ingl s espa ol o franc s visite la secci n de la ayuda en www ZLiveAudio com Pour t l charger ce manuel d instruction en anglais espagnol ou le Fran ais visitez la section de sou
6. NS108B Speaker System with Dock for Zune gt TABLE OF CONTENTS Warnings and Precauti0DS ccconooooccnonnnnonnnnnnss 2 Important Safety Instructl0nS oooccconnnonnncos 3 In the Box amp Features wcciesticcxcoscdssensacceaneteenicnsicte 4 Powering the Udri atea 5 Changing the Remote Battery eee 5 Docking amp Playing a Docked Zune 6 Setting the Clock eerror 6 Using the Video Outputs cetonas 7 Using the Auxiliary Imput oococccccnnnnnnos 7 Location of Controls amp Definitions 8 11 Parts amp Service Information ooooooocccncccnnnonncos 12 e Warnings and Precautions TO PREVENT FIRE OR SHOCK HAZARDS DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE This symbol located on back or This symbol located on back or bottom of the unit is intended to alert bottom of the unit is intended to alert the user to the presence of uninsulated the user to the presence of important dangerous voltage within the operating and maintenance servicing product s enclosure that may be of instructions in the literature sufficient magnitude to constitute a accompanying the appliance risk of electric shock to persons CAUTION TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT FULLY INSERT To reduce the risk of electric shock do not remove cover or back There are no user serviceable parts inside Please refer any servicing to qualified
7. Set Button to activate the clock e Using the Video Output When connecting two products using an RCA Cable match the colored ports with the same colored connection Red to Red White to White and Yellow to Yellow Step 1 Connect a Television to the unit using an RCA Video Cord not included Step 2 Connect a Zune with video to the Dock Step 3 Make sure the television is set to the correct video input Step 4 Video played from the docked Zune will now play through the connected television o N y Television CAUTION ems gt O E i Joo anor Aam Donor OPE Using the Auxiliary Input Step 1 Plug one end of a 3 5 mm cable not included or a 3 5 mm RCA cable not included into the Aux Input on the unit Step 2 Plug the other end of the 3 5 mm cable into the audio output headphone output on an MP3 player or other audio source Step 3 Press the Power Button to turn the unit on Step 4 Remove any docked Zune from the Dock Step 5 Audio played from the MP3 player or other audio source will now be heard on the unit Ifconnecting to the headphone output of an audio source the source s volume controls may need to be adjusted for optimal sound Location of Controls
8. anufacturer that has the same overload protection as the original plug Outdoor Antenna Grounding If an outside antenna is connected to the receiver be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges Article 810 of the National Electrical Code ANSI NFPA 70 provides information with regard to proper grounding of the mast and supporting structure grounding of the mast and supporting structure grounding of the lead in wire to an antenna discharge unit size of grounding conductors location of antenna discharge unit connection to grounding electrodes and requirements for the grounding electrode See figure 20 21 22 23 24 25 26 27 Ground Clamp Power Service Grounding Electrode System NEC Art 250 Part H Lightning For added protection for this product during a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the antenna or cable system This will prevent damage to the product due to lightning and power line surges Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits or where it can fall into such power lines or circuits When installing an outside antenna system extreme care should be taken to keep from touching such power lines or circ
9. by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help 2 e Important Safety Instructions 1 Read Instructions All the safety and operating instruction should be read before the product is operated 2 Retain Instructions The safety and operating instruction should be retained for future reference 3 Heed Warnings All warning on the product and in the operating instructions should be adhered to 4 Follow instructions All operating and use instructions should be followed 5 Cleaning Unplug this product from the wall outlet before cleaning Do not use liquid cleaners or aerosol cleaners Clean only with a dry cloth 6 Attachments Do not use attachments not recommended by the product manufacturer as they may cause hazards 7 Water and Moisture Do not use this product near water for example near a bath tub wash bowl kitchen sink or laundry tub in a wet basement or near a swimming pool and the like The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on apparatus
10. erating instruction Grounding or Polarization This product may be equipped with a polarized alternating current line plug a plug having one blade wider than the other This plug will fit into the power outlet only one way This is a safety feature If you are unable to insert the plug fully into the outlet try reversing the plug If the plug should still fail to fit contact your electrician to replace your obsolete outlet Do not defeat the safety purpose of the polarizes plug Alternate Warnings This product is equipped with a three wire grounding type plug a plug having a third grounding pin This plug will only fit into a grounding type power outlet This is a safety feature If you are unable to insert the plug into the outlet contact your electrician to replace your obsolete outlet Do not defeat the safety purpose of the grounding type plug Power Cord Protection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying particular attention to cords at plugs convenience receptacles and point where they exit from the product Protective Attachment Plug The product is equipped with an attachment plug having overload protection This is a safety feature See Instruction Manual for replacement or resetting of protective device If replacement of the plug is required be sure the service technician has used a replacement plug specified by the m
11. l Stereo Sound Speakers e Built In Digital Amplifier e Digital Volume Control Jacks e Aux In Jack for other Audio Players 3 5mm type e Video Out Jack AC Powered e ETL CETL Listed Full Feature Remote e Controls Docked Zune amp Unit Functions e Uses CR2025 Button Cell Battery Includes e Remote Control Remote Battery included Powering the Unit Power the unit by plugging the attached AC cord into a standard 120 V 60Hz AC outlet p2 Use 2 AAA Batteries not included to serve as a backup power source for the unit in case of a power outage EC za Please note the backup battery power 5 is meant to save the clock time only and SS should not be relied on as a primary power source Changing the Remote Battery The Remote Control has a button cell battery pre loaded into it CR2025 gt OPEN v RELEASE A PUSH Step 1 Push the Release Button and pull out the Battery Compartment to access the battery Step 2 Replace the old battery with an equivalent new battery CR2025 Step 3 The positive side of the battery as indicated by a plus symbol must be facing up with inserted into the remote e Docking a Zune onto the Unit
12. service Replacement Parts When replacement parts are required be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part Unauthorized substitutions may result in fire electric shock or other hazards Safety Check Upon completion of any service or repairs to this product ask the service technician to perform safety checks to determine that the product is in proper operating condition Wall or Ceiling Mounting The product should be mounted to a wall or ceiling only as recommended by the manufacturer Heat The product should be situated away from heat sources such as radiators heat registers stoves or other products including amplifiers that produce heat Battery shall not be exposed to excessive heat such as sunshine fire or the like Main plug is used as disconnect device and it should remain readily operable during intended use In order to disconnect the apparatus from the mains completely the mains plug should be disconnected from the mains socket outlet completely Excessive sound pressure from earphones and headphones can cause hearing loss In the Box e NS108B Docking Brackets for Zune 3 e Remote Control Documentation Features Zune Docking Station e Certified Zune Connector installed for Zune docking e Recharge Circuit for Zune e Controls Connected Zune players 2 Channe
13. tien www ZLiveAudio com All other trademarks appearing herein are the property of their respective owners
14. uits as contact with them might be fatal Overloading Do not overload wall outlets extension cords or integral convenience receptacles as this can result in a risk of fire or electric shock Object and Liquid Entry Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock Never spill liquid of any kind on the product Servicing Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards Refer all servicing to qualified service personnel Damage Requiring Service Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions a When the power supply cord or plug is damaged b If liquid has been spilled or objects have fallen into the product c If the product has been exposed to rain or water d If the product does not operate normally by following the operating instructions Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation e If the product has been dropped or damaged in any way and f When the product exhibits a distinct change in performance this indicates a need for
Download Pdf Manuals
Related Search