Haier A6-707 Washer User Manual
Contents
1. 1 Set the inlet selector handle on spin side and Water inlet fill water for about 1 min e Incase water flows out from wash tub side due to too much inflow please turn down the water tap a bit 2 Close the spin tub outer cover and spin for about 1 2 min Rinsing Rinse with water filing 1 Put the laundries into the wash tub Select suitable current according to the laundries If you find water flo wing out here please 2 Adjust the water level twist the water tap to Set the water level with water level adjusting __ limit the water filling lever according to the laundries quantity Then fill suitable water continuously 3 Rinse Adjust the wash timer to 5 7 minutes to do rinsing Repeat the midway spinning and rinsing with stored water for 2 3 times Rinse with stored water 1 Put the laundries into the wash tub Select suitable current according to the laundries 2 Fill water to preset water level 3 Rinse Adjust the wash timer to 2 3 minutes to do rinsing When the laundries quantity is few please use Soft current If you use Standard current it may splash 10 Put the laundries into the spin tub evenly and smoothly Press the gland in the tub properly Close the inner and outer cover of the spin tub Spin Select suitable spin time according to the laundries and do spinning eDuring spinning if there s abnormal sound it is generally owing to slanting placement of the lau2. fixing As indicated in the figure nip the elastic fixing claw and pull it to the direction of the arrow to take it off Cleaning the overflow filter 2 Take off the corrugation pipe Water level Dismantle the upper part of the adjusting lever corrugation pipe inside the overflow filter as indicated in Corrugation Figure 1 Pipe 3 Cleaning the overflow filter Clean the lint around the filter and flush with tap water Figure 1 4 Install the overflow filter 1 Install the corrugation pipe 2 Insert the mounting plate at the bottom of the filter into the valve cover 3 Hang up the hook at the left upper side 4 Push the upper part in as Figure 2 indicated in Figure 2 Cleaning the protective cover During washing clothes must use protective cover Finished washing everytime please clean lint on the surface Please clean lint underthe protective covertermly Cleaning method Push 1 Pushas the figure take down the protective cover as the arrowhead way a A 13 Cleaning the protective cover 2 cleaning dirty under the protective cover take out the sundries using the plier or other wiry 3 install the protective cover after cleaning install it as origin assure it reliable Xe Disposal of the complete unit After washing dismount the water inlet Wipe the complete unit with soft hose cloth twisted dry e Do not store water in the tub for lo
3. of the wash tub See to the figure Overflow filter Lint filter Usage of the drain hose The drainage shall be smooth with the drain hose 1 The height of the drain hose shall be less than 10cm or the drainage will not be smooth enough and cause incomplete drainage 2 Do not tramp or press the drain hose 3 If the drain hose is too long cut it at mid point To make smooth drainage cut the front end of the hose slantingly 5G lo Q ZZ 4 lf extra drain hose is needed please make separate purchase The inner diameter of the extra hose shall not less than 30mm and the length shall not exceed 1 5m If the extra hose is too long cut it either at point Aor B N How to change the direction of the drain hoses Figure 1 indicates the ex factory installation position of the drain hose AN Back Soft item care y A alt 3h Front rain hose from the sidi Figure 1 Put soft items on the ground Lean the machine down gently with the front surface facing the ground Take off the drain hose from the cabinet Take the hose out of the fixing groove i See to Figure 2 5 5 a Ey a ako if ERTA eE Soft item Figure 2 Embed the drain hose into the groove along the side of the spin tub in the order of 1 3 heading for the side of the wash tub See to Fig
4. Twin tub Washing Machine User s manual This manual is for AS 707 Please read this manual carefully before using Retain it for future reference Contents J Packing list sn ee ee ee The cover 2 N Names of the parts e e eee eee eee Safety precautions see eee eee eee Installation and adjustment Preparation before washing The musts in washing eeseee eee eee e Usage of the detergent aed awe vale Sad eee e Washing sequence eee Disposal after washing tttttttttrte Trouble Shooting Answers to question he pecification ee ee ee ee ee ee Packing list C Name Quantity 5 e User s manual One piece One piece Lint filter Rae One piece Gland One piece Twin tub washing machine One set bas at Names of the parts Outer cover of the spin tub Water filling entrance water filling translation Control panel Inner cover of the spin tub Major frame Overflow filter Water level adjusting lever Spin tub Valve cover Lint filter Installed by user protective cover Pulsator Wash tub Cabinet Drain hose __ Power cord Wash tub cover Base frame Meaning and description of the symbols Contents marked with that symbol are related Warning sign to the safety of the product and the personal safety of the users Please operate in strict
5. conformity to the contents otherwise it may cause damage of the machine or injure the personal safety of the user Contents marked with that symbol are actions forbidden to perform Performing of those actions may result in damage of the machine or injure the personal safety of the user Please check if the power receptacle has good earthing condition before using to guarantee your safety 1 Forbidding sign Safety precautions Please insert the power cord into special receptacle with rated vol tage Be sure to use single phase three pins receptacle The earthing terminal of the receptacle must be earthed reliably If possible please adopt electric leakage protector When the machine is normally using please put the power plug at the location easily to be insert ed and extracted by hand Be sure to pull the plug off when there s power failure or the machine is being moved cleaned or when it is idle If the supply cord is damaged it must be replaced by the manufacturer orits service agent ora similarly qualified person in orderto avoida hazard Do not put the machine at damp place like the bathroom Never wash it with water Do not place wet laundries on the control panel For washing machine with ventilation openings inthe base that a carpet must not obstruct the openings 2 ae Ventilation hole at Bea the bottom of the Gee sb washing machine bE eatea ma S Do not wash wat
6. de of the spin tub service department The draining does not work There s ab Are there hair pin coins or Remove the hair pin coins or ere s abnormal metal items brought inside metal items sound during washing the tub Is the machine slanting Level the machine properly e Is the gland pressed evenly Pressed the gland evenly e Are there laundries falling to e Remove the laundries spinning the outer side of the spin tub e Are the laundries in spin tub e Remove alittle laundries too much There s abnormal sound and violent vibration during Specification Water level Water quantity about L Maximum 48 Medium 39 Minimum 33 Washing capacity kg 7 0 4 5 Spinning capacity kg Injection pressure MPa 0 02 0 2 15
7. er proof laundries like the raincoat bike covers etc to avoid abnormal vibrations Do not let the machine share one receptacle with other electric appliances If the power plug is damaged or the plugging into the receptacle is loose do not use the plug any more 9 9 icd Safety precautions Do not stretch hands into the working Do not decompose repair or alter the machine It is dangerous even if the machine by yourself rotation is slow Take special care of the children Do not wash laundries with volatile Do not put any hot or heavy items materials such as thinner petrol etc such as the kettle with hot water on the washing machine Handicapped or children without care Keep the machine away from direct shall not use the machine ae and heat source like the eater Please check if the connection of the To protect your laundries and wash ing machine please take out all of the water inlet pipe is proper coins buttons sand hairpinand _ It is suggested to use foamless washing other foreign materials before washing powder lt P Installation and adjustment Please install and adjust the machine according to the requirement of the manual It is very important to your security and correct operating the machine Install the lint filter After opening the package please take out the lint an filter from the document bag install it to the overflow filter
8. es less than 1 0kg so as to avoid splashing of water e It is suggested not to use high sudsing detergent Usage of the detergent How to use the whitener How to use the washing powder Direct dissolved in the machine 1 Fill small quantity of water 2 Add the powder Run for 30 seconds to dissolve it completely e Avoid using whitener on laun 3 Put in laundries Select suitable dries with color or pattern as they water level are prone to lose color Fill water to decided level Dilute the whitener with container Pour it slowly into the washing tub The instant dissolving of the washing The whitener shall not touch powder the laundries directly 1 Prepare warm water of 30 C and a Refer to the user s manual for container 2 Add the powder while stirring to fully dissolve it The powder is more prone to pollute the laundries than the detergent Therefore please use it with proper quantity e Dosage of different washing powder is different Please refer to the instruction of the washing powder for the detail dosage the usage and quantity of the whitener e For powder whitener please dissolve it before using Washing sequence Wash timer Wash selector Spin timer fo set to below 2 minute Strong current to set to below 1 minute irst set to 5 minute then standard current irst set to 2 minute then turn it back it can increase turn it back it can increase the service life of the ti
9. mer the service life of the timer 5 STRONG OFF i iyw ba OFF a A soar 15 6 inn DRAIN shai 12 SPIN TIMER i 6 a A WASH TIMER WASH SELECTOR 9 duvaniin anszuunsdin 3 foventunane a 1 Inlet selector 1 Set inlet selector to Wash side Figure 1 Cry Figure 1 2 Adjust water level rod to a position as needed me O p 2 Fill the water and add the dissolved washing powder to make the water level reach the preset position Figure 2 Run washing program for some time to stir and dissolve the powder completely 3 Put in the laundries If the water quantity is insufficient please add water Figure 3 Figure 2 4 Select the current Select the strength of the current according to the laundries Figure 3 5 Select the washing time A LA Select the washing time according to the N A Figure 4 laundries Figure 4 STRONG mn 6 After washing the buzzer will ring Set the WASH SELECTOR at DRAIN Figure 5 Figure 5 Midway spinning 1 Put the laundries into the spin tub evenly and smoothly 2 Spin 1 Put the gland in properly e Please put in the gland properly even if the laundries quantity is small Push Gland Push S 6 Proper The laundries Proper No gland are slanting 2 Close the inner and outer cover of the spin tub Outer cover of The spin tub Inner cover of 3 Spin for 1 2 minutes The spin tub 3 Run the foam removing spinning
10. ndries Please stop the machine and re order the laundries In spinning it will pause the work if you open the outer cover of the spin tub Close it to resume the spinning To do spinning and draining or rinsing with water filling together please first do spinning for around 1 minute then do draining or rinsing with water filling Otherwise the spinning will stop owing to too much water stored in the spin tub J 11 Disposal after washing After using please clean the lint and eyewinker of the lint filter and overflow filter in time Otherwise it may influence your using the machine Please first pull off the power plug from the receptacle before cleaning Cleaning the lint filter The lint filter must be used during washing t must be cleaned in time after each using 1 Take off the lint filter Put hand at the indicated position Push down to take it off See Figure 1 2 Clean the lint Put it in water and clean while it is still wet See Figure 2 3 Install the lint filter After cleaning insert the bottom Figure 2 of the lint filter marked with down side into the overflow filter then push the upper part of the filter in marked with up side See Figure 3 Figure 3 Cleaning the overflow filter Too much lint on the overflow filter will influence the normal usage of the machine Please clean it every two months Take off the overflow filter ae
11. ng Wipe with neutral detergent if too dirty Peril Rr RANE Do not wash it directly by water Pull off the power plug and hang up the power cord Hang up the drain hose Wipe off the water drops on the surface and inside the tub with clean soft cloth Open the cover of the wash tub and the inner outer cover of the spin tub for some time about one hour then close them Trouble shooting Answers to question If the laundries fall to the outer side of the spin tub If the laundries fall to the outer side of the spin tub Please contact the after sales service department 14 Trouble shooting Answers to question If there s breakdown please pull off the power plug before checking The following phenomena are not breakdowns sometimes Please confirm again before sending it to repair If there are real breakdowns please come to the special maintenance department or after sale service department of our company Do not repair it by yourself Phenomena The reason How to settle Th hine d e Is there power failure e Use it when the power is on be oa INE does e Is the power plug loose e Insert the power plug tightly i Is the pulsator twisted by Remove the foreign materials foreign materials Is the drain hose put down Put down the drain hose Is the drain hose blocked by e Remove the foreign material foreign material Are there laundries falling to e Please contact the after sales the outer si
12. rpins close zippers large Stretch laundries may on washing ete Jand loosen the cause noise For laundries before the sake of putting them in discretion please the tub put the laundries with buttons into other laundries Ai e Check if the laundries are applicable for washing with machine Divide the laundries that are not colorfast from other laundries Put those laundries difficult to absorb water into water with hand For those laundries with heavy soil please first remove the dirt like mud or dust For the parts with heavy soil please apply detergent on them in advance which can make it easier to remove the soil For those laundries that may get lint ball and those with long fur tum it over before putting in Do not put those laundries polluted by chemicals into the washing machine directly The musts in washing The capacity of washing and spinning of the machine refer to the weight of the standard laundries under dry condition that can be washed or spinned in one time Laundries quantity in one washing cycle shall be lower than the standard capacity the largest capacity is only the loading capacity of the drum The thickness size type of the cloth will influ ence the actual washing capacity Itis suit able to put in reasonable amount of laundries and the laundries can be turned round in wash ing for one time washing e Do not select Maximum water level for laundri
13. ure 3 Embed the drain hose into the groove with hands Take care not to damage the drain Figure 3 i Extend to the Embed into the hose in fastening the fixing clamp spin tub side groove in tum Install the water inlet hose Select the water level Insert the water inlet hose into the water filling entrance on the control panel directly pull it out to dismantle it Water inlet rose Select water level according to the Water filling quantity of the laundries entrance Set the water level adjusting lever Water level to needed line indicator Use the new water inlet hose provided Maximum _Max with the machine to connect to the Med water faucet Old hose sets should Median not be reused Minimum gt Min Preparation before washing Preparation before washing 1 Connect the water inlet hose 2 Confirm that the washing machine is earthed reliably Then insert the power plug into the receptacle Do not connect the earth terminal to the gas pipe and tap water pipe 3 Put down the drain hose 4 Slanting or uneven ground may result in unstable working or abnormal noise Please make the machine stand horizontally Pay attention to followings before washing the laundries Check if The quantity of the laundries ae i ede the laundries is running has special out the coins hoe shall not be too buttons of the requirement sand hai
Download Pdf Manuals
Related Search