Eureka 6900 SERIES Vacuum Cleaner User Manual
Contents
1. Home Cleaning System Vacuum Cleaner Household Type Owner s Guide 6900 Series Important Safeguards Service Information Thermal Cut Off Brush Roll Belt Light Bulb 3 Customer Order Form 15 16 Warranty 17 www eureka com IMPORTANT SAFEGUARDS When using an electrical appliance basic precautions should always be followed including the following READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER WARNING To reduce the risk of fire electric shock or injury Do not use outdoors or on wet surfaces Do not leave vacuum cleaner when plugged in Turn offthe switch and unplug the electrical cord when not in use and before servicing Do not allow to be used as a toy Close attention is necessary when used by or near children Use only as described in this manual Use only manufacturer s recommended attachments Do not use with damaged cord or plug If vacuum cleaner is not working as it should has been dropped damaged left outdoors or dropped into water return itto a service center before using Do not pull or carry by cord use cord as a handle close a door on cord or pull cord around sharp edges or corners Do not run vacuum cleaner over cord Keep cord away from heated surfaces Hold plug when rewinding onto cord reel Do not allow plug to whip when rewinding Do not use extension cords or outlets with inadequate current carrying capacity Turn off all controls before unplugging Always turn off2. Remote Speed Control 1 Snap interlocking wands together y 2 Push assembled wands into the quick release socket attached to a power nozzle 3 Push motorized nozzle plug into the retainer O located atthe top of the upper wand secure cord in slot Detail A 4 Place Power Touch hose handle into wands until plug connects and button locks Continue on next page to complete assembly V Quick gt Release Lower Assembly Step here amp pull up to release lt Handle Release Continued 5 Insert hose coupling into top of canister 6 Push hose power cord into receptacle located near the canister handle 7 Pull cord out and push plug into outlet To rewind step on Cordaway cord reel button hold and guide plug while it rewinds 8 10 Step on motorized nozzle to release handle pull back to comfortable work position Push On Off canister switch Symbol is the international symbol for on off A thermostat automatically shuts off the motor if it overheats see Thermal Cut Off Bare floor or carpet cleaning selection on remote control only NOTE Optional remote controls on the hose handle operate only if the canister switch is on Your new vacuum cleaner may be equipped with an optional Cyclonic Bag Saver To assemble the cleaner with this option follow these instructions otherwise follow the owner s guide for assembly 1 Long Lo
3. as necessary Some fine particles can restrict airflow very quickly and will decrease performance even before the bag appears to be full When vacuuming carpet fresheners or cleaners plaster dust or similar fine substances clean the bag and filters more often Bag Change Indicator The bag change indicator bar fills as the airflow through the bag decreases Certain types of fine particles like powder plaster dust or carpet fibers can restrict airflow very quickly and will decrease performance even before the bag appears to be full When the warning appears change the disposable dust bag to restore maximum performance If a clean dust bag does not restore maximum performance clean the filters and check the hose and wands for obstructions Empty Bar Filled Bar HOW TO CHANGE DISPOSABLE DUST BAG NOTE Turn off the power switch and disconnect electrical cord from wall socket before changing dust bag Never use the cleaner without a dust bag or filters To remove used dust bag 1 Unlatch the hose latch to open the lid of bag compartment 2 Push the bag s cardboard disc closed grasp the cardboard collar and lift out the full bag To install new dust bag 3 Putinthe new dust bag part number 60284 by slotting the cardboard collar into the channel holder The lid cannot be closed over a bag that is not fitted into place 10 Filters For maximum efficiency be sure to maintain the motor filter a
4. le risque de feu de choc lectrique ou de blessure Ne pas utiliser l ext rieur ou sur des surfaces mouill es Fermez le commutateur et debranchez l appareil lorsque vous ne l utilisez pas ou avant le nettoyage ou l entretien Ne permettez pas qu il soit utilis comme jouet Une attention particuli re est n cessaire lorsque utilis par ou pr s d un enfant Suivez les recommandations d utilisation de ce manuel Utilisez uniquement les accessoires recommand s par le fabriquant Ne pas utiliser si le cordon ou la fiche sont endommag s Si l aspirateur ne fonctionne pas comme il le devrait s il a t chappe s il est endommag s il a t laiss l ext rieur ou chappe dans l eau retournez le un centre de service avant d utiliser Ne pas le tirer ou le transporter par le cordon ne pas utiliser le cordon un guise de poign e Ne pas fermer une porte sur le cordon ou tirer le cordon sur des coins ou bordures pointus Ne pas circuler sur le cordon avec l aspirateur Tenir le cordon distance des surfaces chauffantes Tenir la fiche lorsque vous rebobinez le cordon lectrique Ne pas permettre que la fiche batte l air Ne pas utiliser des rallonges ou des prises qui n ont pas de capacit suffisante pour transporte le courant Eteindre toujours l appareil avant de connecter ou de d connecter le tuyau ou la lance motoris e Fermer tous les contr les avant de d brancher Le tuyau contient des fils
5. NOTE Unpack and identify all parts Fully assemble before using O 9 Power Switch Cordaway Cord Reel Bag Change Indicator Bag Cover Latch HEPA Filter Tool Pak Cover Latch Tool Pak Storage a Dusting Brush b Crevice Tool c Upholstery Nozzle 8 Floor Brush 9 Disposable Dust Bags 10 Hose has Power Touch Handle with remote controls 10a and coupling 10b with plug 10c See instructions on pages 6 and 7 11 Hose Plug Connection 12 Canister Handle 13 Button Lock Extension Wand with plug retainer 14 Button Lock Extension Wand with cord retainer 15 Motorized Nozzle 16 Quick Release Wand System NIO OR OND Always carry the vacuum by the handle when cleaning steps etc How to Assemble and Use Select bare floor or POWER TOUCH Handle carpet cleaning Remote ON OFF Selector for bare floor or carpet S Carpet push down on front Off middle Bare Floor push down on back Power ON OFF can be controlled on some models from the POWER TOUCH handle switch or canister ON OFF switch Other models can only use the canister switch Power Touch Hose Handle Remote Speed Control optional Adjusts the speed of the canister motor slide to reduce or increase power as needed lt Vacuum Control Cleaning suction is reduced by pushing lever to LOW position Detail A Place lever at HIGH position to increase suction for carpet cleaning Available on models without
6. TOTAL ENCLOSED Method of payment No C O D Orders Check or money order payable to The Eureka Company Do not send currency Visa 13 15 digits MasterCard 13 digits Charge to my Amer Express 15 digits Acct number Signature full name as shown on acct Expiration Date 59411 2001 White Consolidated Industries Inc Printed in U S A THE EUREKA LIMITED WARRANTY What This Warranty Covers Your Eureka cleaner is warranted to be free from all defects in material and workmanship in normal household use for a period of one year The warranty is granted only to the original purchaser and members of his or her immediate household The warranty is subject to the following provisions What This Warranty Does Not Cover e Parts of the cleaner that require replacement under normal use such as disposable dust bags filters drive belts light bulbs and brush roll bristles Damages or malfunctions caused by negligence abuse or use not in accordance with the Owner s Guide Defects or damages caused by unauthorized service or the use of other than Genuine Eureka parts What The Eureka Company Will Do The Eureka Company will at its option repair or replace a defective cleaner or cleaner part that is covered by this warranty As a matter of warranty policy the Eureka Company will not refund the consumer s purchase price Warranty Registration P
7. a 1 800 282 2886 If you prefer you can write to The Eureka Company Service Division 807 North Main Street Bloomington Illinois 61701 USA The Eureka Company 866 Langs Drive Cambridge Ontario N3H 2N7 Refer to The Eureka Limited Warranty for complete service information DO NOT OIL the motors in the canister and the motorized nozzle or the brush roll at any time The bearings are permanently lubricated and sealed Rating Plate 2 x The model type and serial numbers are indicated on the rating MADE IN PES plate located on the underneath side of the cleaner For prompt SWEDEN NME TES and complete service information always refer to these numbers A LN eee when inquiring about service MODEL TYPE SERIAL NO Model No 8 Type gt HOUSEHOLDTYPE TYPE MENAGER SN en 120 V AMPS ee ML 60 HZ 12 0 NO 945G Y Thermal Cut Off This vacuum cleaner has a special thermostat that protects the cleaner in case of motor overheating If the cleaner suddenly shuts off push the switch pedal once and unplug the cleaner Check the cleaner for a possible source of overheating such as a full bag a blocked hose or clogged filter If these conditions are found fix them and wait at least 30 minutes before attempting to use the cleaner After the 30 minute period plug the cleaner back in and turn on the switch If the cleaner still does not run then take itto a Eureka Authorized Service Center for repair ASSEMBLY ITEMS
8. e 1 Remove two screws from bottom side Turn over to grasp hood near handle socket and lift forward Replace headlight bulb if necessary Use GENUINE EUREKA replacement bulb refer to customer order form o Continue to step 2 to change belt Skip to step 7 and 8 to replace hood on motorized nozzle Brush 4 Roll Pulley 5 Rotate belt onto motor pulley 6 Replace brush roll cover 2 Remove two screws located in front of the light bulb and lift up to remove the brush roll cover Motor Pulley a 7 Tilt cover over ridge and push down 8 Secure with screws on underside refer to 1 8 Lift out brush roll replace new belt around brush roll pulley GENUINE Look for the turexarrooucr symbol Use GENUINE EUREKA replacement belt 58065 14 The Eureka Company au EUREKA ORDER FORM Bloomington IL 61702 2799 Not applicable in Canada Name Name Address street address needed for UPS Address street address needed for UPS ovroo oO Io City State City State oa Telephone Day Eve oa Telephone Day Eve IMPORTANT Be sure to include PartNo Qty Price USD Total your model type and serial numbers Genuine Eureka Bags Belts and Filters These numbers may be found on the rating plate A Disposable Bags style EX package of 3 60284 Belts package of 2 58065 M
9. e les balayer CONSERVEZ CES INSTRUCTIONS To reduce the risk of electric shock this appliance has a polarized plug one blade is wider than the other The plug will fit in a polarized outlet only one way If the plug does not fit fully in the outlet reverse the plug If it still does not fit contact a qualified electrician to install the proper outlet Do not change the plug in any way Afin de r duire le risque de choc lectrique cet appareil est muni d une fiche polaris e une des lames est plus large Cette fiche ne peut tre ins r e dans une prise polaris e que d une seule facon Si la fiche ne peut tre ins r e dans la prise retourner la fiche Si la fiche ne peut toujours pas tre ins r e dans la prise faire installer une prise ad quate par un lectricien qualifi Ne pas modifier la fiche GENERAL INFORMATION The bag may have come dislodged in shipping Check the bag to insure proper seating before attempting to use the cleaner Do not operate the cleaner without a dust bag or the filters Damage may result to the motor see Dust Bag and Filter The cleaner is designed to pick up dirt and dust particles Avoid picking up hard or sharp objects with the cleaner to avoid bag breakage hose clogging or possible motor damage Service Information The instructions in this booklet serve as a guide to routine maintenance If additional service is required telephone toll free USA 1 800 282 2886 Mexico 5670 6169 Canad
10. imitation and Genuine Eureka paper bags belts and parts Yes there are some very important differences in materials quality and reliability Many customers have mistakenly purchased imitation paper bags and parts while thinking they purchased genuine Unfortunately many of these customers discovered the differences after they experienced related difficulties For Genuine Eureka Value Accept No Imitations THE EUREKA COMPANY Bloomington Illinois 61701 Household Warranty abs 190 17 2000 White Consolidated Industries Inc Part No 70830 101 Printed in U S A
11. lease fill out and return the warranty registration card accompanying your cleaner Obtaining Warranty Service To obtain warranty service you must return the defective cleaner or cleaner part along with proof of purchase to any Eureka Authorized Warranty Station You will find the nearest location in the Yellow Pages under Vacuum Cleaners Service and Repair Be certain that the Warranty Station is Eureka Authorized For the location of the nearest Eureka Authorized Warranty Station or for service information telephone toll free USA 1 800 282 2886 Mexico 5670 6169 Canada 1 800 282 2886 If you prefer you can write to The Eureka Company Service Division 807 North Main Street Bloomington Illinois 61701 USA In Canada write to The Eureka Company 866 Langs Drive Cambridge Ontario N3H 2N7 If it is necessary to ship the cleaner outside your community to obtain warranty repair you must pay the shipping charges to the Eureka Authorized Warranty Station Return shipping charges will be paid by the Warranty Station When returning parts for repair please include the model type and serial number from the data plate on the cleaner Further Limitations and Exclusions Any warranty that may be implied in connection with your purchase or use of the cleaner including any warranty of Merchantability or any warranty for Fitness For A Particular Purpose is limited to the duration of this warranty Some states do not allow limitations on h
12. lectriques et ne doit pas tre utilis s il est ab m coup ou perc viter de ramasser les objets aigus Ne pas d brancher en tirant sur le cordon Pour d brancher tenez la fiche et non le cordon Ne pas manipuler la fiche ou l aspirateur avec les mains mouill es Ne pas rien ins rer dans les ouvertures Ne pas utiliser si des ouvertures sont bloqu es assurez vous qu elles soient d gag es de poussi re mousse cheveux ou toute autre chose qui pourrait r duire le passage de l air Cet aspirateur cr e de la succion et contient un rouleau brosse tournant Tenir les parties mobiles et les ouvertures loin des cheveux du linge des doigts et de toute partie du corps Ne pas ramasser des objets qui br lent ou fument comme les cigarettes allumettes ou cendres chaudes N utilisez pas sans le sac de poussi re en place Les poulies du courroie peuvent devenir chaudes pendant l utilisation normale Pour pr venir des br lures vitez de touch la poulie du courroie lorsque vous r parez la courroie Portez une attention particuli re lorsque vous nettoyez les escaliers Ne pas utiliser pour ramasser des liquides inflammables ou combustibles comme de l essence Ne pas utiliser dans les endroits o ces liquides pourraient tre pr sents Entreposez votre aspirateur l int rieur dans un endroit propre et sec Maintenez un bon clairage l endroit o vous travaillez D brancher les appareils lectrique avant d
13. nd the final filter regularly Motor Filter Inspect the motor filter with each disposable dust bag change The motor filter in the bag compartment should be cleaned when necessary or about twice a year Open the cover and lift up on the filter Shake out thoroughly e Replace with a new filter if necessary part number 60541 11 Filters continued HEPA Filter Check the HEPA filter with each disposable dust bag change Replace after every six bag changes or when obviously dirty 1 To change HEPA filter press exhaust grille to open the filter cover 2 Remove filter cover by lifting up Pull out the used HEPA filter by using finger tab Put in new HEPA filter Part number 60286 5 Replace filter cover 12 Brush Roll The brush roll turns to sweep and comb the carpet nap Keep the brush roll free from hair and threads so it will continue cleaning When the bristles of the brush roll no longer touch a piece of cardboard held across the bottom plate the brush roll is ineffective because the bristles no longer touch the carpet nap To maintain the most effective cleaning install a new brush roll Brush Roll Belt and Light Bulb The brush roll belt on the motorized nozzle drives the brush roll to agitate sweep and comb the carpet nap The belt should be checked regularly to be sure that it is in good condition Replace the belt if it is stretching cracking or slipping Cut away a
14. ny hair or thread wound around the brush roll or belt pulley because the buildup could cause the belt to rotate unevenly How to Replace Worn Belt or Light Bulb On Some Models Note Turn off the switch and unplug the electrical cord before replacing belt or bulb Pulleys can become hot during normal use To prevent injury avoid touching the pulleys when servicing the drive belt 1 Remove four screws from bottom side Turn unit over T pull up on hood to remove Replace light bulb if necessary Use GENUINE EUREKA replacement bulb refer to customer order form ii Continue to step 2 to change belt Skip to step 7 to Motor Pulley replace hood 2 Lift out brush roll and discard used belt a 0 y 3 Put new belt around brush roll pulley first then the motor pulley 4 Place left end cap into the base 5 Pull right end of brush roll to stretch belt Secure right end cap into base 6 Rotate brush roll to seat belt 7 Position hood secure with screws GENUINE Look for the LE symbol Use GENUINE EUREKA replacement belt 58065 Brush Roll Pulley How to Replace Worn Belt or Light Bulb On Some Models Note Disconnect power cord and wands from electrical hose before replacing belt or bulb Belt pulleys can become hot during normal use To prevent burns avoid touching the belt pulley when servicing the drive belt 4 Return brush roll into bas
15. odel Number Motor Filter 60541 Type 60286A Serial Number To Order By Phone 1 800 ae i Dusting Brush with swivel bristles 54903 Call between 8 a m de Upholstery Nozzle 54904 Monday through Friday By FAX Crevice Tool 54905 1 309 823 5789 Expandable Crevice Tool 60112 To Answer Problems or Questions for U S A Floor Brush 54785A and Canada call 1 800 282 2886 7 a m to 8 p m central standard time Monday through Saturday Tool Rack 18 inch wall storage for most tools 52001 En Mexico llame al 5670 6169 Micro Tool Set for Keyboards etc 54002 By Mail i Simply fill out this Order Form Please be sureto Wands chrome button lock unless otherwise noted include day re Wand Upper for Power Touch Handle only Www guroka com Wand Lower 19 inch black cord channel I Wand 19 inch SUBTOTAL Part No Qty Price USD Total Hose swivel coupling Electric 3 pos Power Touch Handle Model 6993 Electric 2 pos Power Touch Handle Model 6978 Brush Roll Brush Roll with 2 rows of bristles Miscellaneous Items Gb Light Bulb 15 watt 59045 Extension Cord 10 foot white only Subtotal From Front Total prices subject to change without notice Tax add state tax amp local taxes as required by law Postage amp Handling Charge within U S A TOTAL
16. one unit Push the long lower wand into the powerhead unit Plug the powercord into the powercord retainer at the top of the cyclonic housing see Detail A Attach the powertouch handle following instructions in the owner s guide Important Safety Information Do not vacuum surfaces which have been subjected to inflammable solvents Do not pick up any liquid Do not pick up hot ashes which could cause a fire Emptying Empty the dust compartment of the cassette after each use or when the dust cup is filled up to the MAX level Fig 3 Detach the dust cup by following the instructions in Fig 2b in reverse Empty the contents into a waste container To reattach the dust cup again follow the described steps in Fig 2b Maintenance The Cyclonic Bag Saver can be washed in cold or warm water and a mild detergent Thoroughly dry the dust compartment with a soft towel before using it again If the cyclone unit clogs use the vacuum cleaner to unclog it HOW TO MAINTAIN The paper bag and filters play a very important role in the efficiency of the vacuum cleaner The purpose of the paper bag is to trap dirt and at the same time the paper must be porous enough to allow air to pass through If the paper bag or filters become clogged no air can pass through the cleaner and no cleaning takes place regardless of how powerful the unit To keep the cleaner operating at maximum efficiency change the dust bag frequently and clean the filters
17. ow long an implied warranty lasts so the above limitations may not apply to you Your relief for the breach of this warranty is limited to the relief expressly provided above In no event shall Eureka be liable for any consequential or incidental damages you may incur in connection with your purchase or use of the cleaner Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you This warranty gives you specific legal rights You may also have other rights which vary by state GENUINE EUREKA PRODUCT Questions amp Answers about Genuine Eureka Products Why should I use only Genuine Eureka paper bags belts and parts in my Eureka vacuum cleaner Using Genuine Eureka Products which are made to our exacting specifications and engineered with emphasis on quality performance and customer satisfaction ensures the long life and cleaning efficiency of your vacuum cleaner Overall this saves you money and helps to keep your home clean How can I be sure I am using only genuine Eureka products in my vacuum cleaner Typically packaged products and paper bags can be identified by a Genuine Eureka Product symbol see illustration above For further identification assistance you may call our toll free number 1 800 282 2886 for the location of a nearby Eureka Authorized Warranty Station Are there any differences between made to fit or
18. this appliance before connecting or disconnecting either hose or motorized nozzle Do not unplug by pulling on cord To unplug grasp the plug not the cord The hose contains electrical wires Do not use if damaged cut or punctured Avoid picking up sharp objects Do not handle plug or vacuum cleaner with wet hands Do not put any object into openings Do not use with any opening blocked keep free of dust lint hair and anything that may reduce airflow This vacuum cleaner creates suction and contains a revolving brush roll Keep hair loose clothing fingers and all parts of body away from openings and moving parts Do not pick up anything that is burning or smoking such as cigarettes matches or hot ashes Do not use without dust bag in place Belt pulleys can become hot during normal use To prevent burns avoid touching the belt pulley when servicing the drive belt Use extra care when cleaning on stairs Do not use to pick up flammable or combustible liquids such as gasoline or use in areas where they may be present Store your cleaner in a cool dry area Keep your work area well lighted Unplug electrical appliances before vacuuming them SAVE THESE INSTRUCTIONS CONSEILS DE SECURITE Lors de l utilisation d un appareil lectrique quelques pr cautions l mentaires doivent tre observ es incluant les suivantes LISEZ TOUTES LES INSTRUCTIONS AVANT D UTILISER VOTRE ASPIRATEUR AVERTISSEMENT Pour r duire
19. wer Wand 7 Powercord Fy Powerhead Unit This accessory reduces the need for frequent bag changes It does not eliminate the use of a paper bag To remove the Cyclonic Bag Saver follow the steps in reverse and reattach the large upper wand UNPACKING AND ASSEMBLING Unpack and check that all the parts are included The Cyclonic Bag Saver consists of three main parts see Fig 1 1 Cyclonic Housing 2 Cyclone Dust Cup 3 Retaining Clip Attach retaining clip onto the rear of the cyclonic cup as shown in Fig 1a Attaching the Cyclonic Bag Saver onto the vacuum cleaner NOTE If the two long wands have already been assembled to the powerhead remove the long upper wand to assemble the Cyclonic Bag Saver Your vacuum cleaner is equipped with three wands Locate the short wand Fig 2a Line up the small hole at the top of the short wand with the arrow on the front of the cyclonic housing Push the short wand into the top of the cyclonic housing until it clicks into place You may need to rotate the wand slightly Fig 2b Attach the cyclonic dust cup onto the cyclonic housing Place the slot in the cyclonic dust cup over the tab on the cyclonic housing Then grasp the handle on the cyclonic dust cup and pivot the cyclonic dust cup up and over the ledge on the cyclonic housing Fig 3 Push the nozzle at the bottom of the cyclone unit into the top of the long lower wand Adjust the position of the cycl
Download Pdf Manuals
Related Search