Home

Epson 9600 Printer User Manual

1. AC cord accessory Notes e Insert the AC cord firmly into place e When disconnecting the AC cord be absolutely sure to disconnect the AC cord plug at the socket outlet first e The included AC cord is for use with this unit only Video equipment connection IR IN OUT IR IN OUT infrared signal Terminal Enable connection of multiple displays see page 13 CHARGE OUT Connect to separately sold devices such as stick PCs to supply power see page 13 CHARGE DCSV 500mA SERIAL SERIAL Input Terminal Control the Display by connecting to PC see page 12 Cz SERIAL LAN Connect to a network z to control the unit PC IN see page 41 47 PC Input Terminal z see page 11 o AUDIO IN DVI D PC IN Connect the audio output of a device connected to DVI D IN PC IN see page 10 11 DVI D IN DVI D Input Terminal see page 10 AUDIO OUT Connect to sound equipment see page 9 DVI D IN AV IN HDMI 1 HDMI 2 D HDMI Input Terminal or see page 9 2 Hom AVIN Connections AUDIO OUT connection Notes e Additional equipment and cables shown are not supplied with this set e To output sound from the AUDIO OUT terminal of the Display be sure to set
2. y HDMI 2 REZ Main Power On Off Switch 17 Basic Controls Remote Control Transmitter OFF TIMER button The Display can be preset to switch to stand by ACTION button after a fixed period The setting changes to 30 Press to make selections minutes 60 minutes 90 minutes and 0 minutes off timer cancelled each time the button is pressed ASPECT button r gt 30 min gt 60 min gt 90 min Press to adjust the aspect see page 19 0 min lt I When three minutes remain Off timer 3 min will Standby ON OFF button flash The Display must first be plugged into The off timer is cancelled if a power interruption the wall outlet and turned on at the power occurs switch see page 14 AUTO SETUP button Automatically adjusts the position size of the screen see page 22 Press this button to turn the Display On from Standby mode Press it again to turn the Display Off to Standby mode POS SIZE button see page 22 23 Pao fall DE Bag SET UP button see page 27 42 PICTURE button SOUND button see page 26 see page 24 25 T Volume Adjustment Sound mute On Off Press the Volume Up or Down Press this button to mute the sound button to increase or decrease Press again to reactivate sound the sound volume level R button see page 21 Sound is also reactivated when power is turned off o
3. Press to confirm N press the power switch 1 on main unit to turn the power off For TH 42LFE7U TH 50LFE7U TH 65LFE7U If the power switch is locked please disconnect the AC cord plug from the wall outlet from the unit 1 Press the MENU button till the Setup menu is displayed 2 Press the Volume Up or Down button to select OSD Language 3 Press and hold the ENTER button till the Shipping menu is displayed 4 Press the Volume Up or Down button to select Yes 5 Press the ENTER button and wait for 10 sec 6 Press the power switch 4 on main unit to turn the power off For TH 42LFE7U TH 50LFE7U TH 65LFE7U If the power switch is locked please disconnect the AC cord plug from the wall outlet 56 Specifications e TH 42LFE7U TH 42LFE7E ER 110 127 VAC 50 60 Hz 220 240 V AC 50 60 Hz Power Consumption Rated Power Consumption Stand by condition 0 5 W Power off condition 0 4 W 95 W Sound Speakers 25 mm x 90 mm x 2 pcs Audio Output 20 W 10 W 10 W 10 THD LCD Display panel 42 inch IPS panel LED backlight 16 9 aspect ratio Screen size 36 5 W x 20 5 H x 41 9 diagonal 928 mm W x 522 mm H x 1 065mm diagonal No of pixels 2 073 600 1 920 W x 1 080 H 5 760 x 1 080 dots Operating condition Temperature 32 F 104 F 0 C 40 C Humidity 20 80 Applicable signals Scanning
4. Signal Name gt zZ Signal Name T M D S data 2 T M D S data 2 5 V DC T M D S data 2 shield Ground Hot plug detect T M D S data 0 DDC clock T M D S data 0 DDC data T M D S data 0 shield T M D S data 1 T M D S data 1 T M D S clock shield T M D S data 1 shield T M D S clock QOGEEEEE eCe0 GOGO GOES EoQe O e Image deterioration may occur depending on the length or the quality of the cable 10 T M D S clock Connections PC Input Terminals connection Female Conversion adapter A COMPUTER if necessary _ Mini D sub 15p EA c20 620 22 209 H A Male I Shared with DVI D IN Stereo mini plug M3 Audio S Connect a cable which matches the audio output terminal on the computer DVI D IN Notes Computer signals which can be input are those with a horizontal scanning frequency of 30 to 110 kHz and vertical scanning frequency of 48 to 120 Hz However the image will not be displayed properly if the signals exceed 1 200 lines e The display resolution is a maximum of 1 440 x 1 080 dots when the aspect mode is set to 4 3 and 1 920 x 1 080 dots when the aspect mode is set to 16 9 If the display resolution exceeds these maximums it may not be possible to show fine detail
5. You can use a Web browser to control the unit and set up a network and password Before Using Web Browser Control To use the Web browser control the unit and computer setups are required Unit Setup Set each Network Setup setting and make sure to set the Control I F Select to LAN see page 41 42 Computer Setup Disable the proxy server settings and enable JavaScript Windows Disable proxy server settings 1 Display Internet Properties window Click Start Control Panel Network and Internet Internet Options 2 Click the Connections tab and then LAN Settings 3 Deselect the Use automatic configuration script and Use a proxy server for your LAN boxes 4 Click OK Enable JavaScript 1 Display Internet Properties window Click Start Control Panel Network and Internet Internet Options 2 Set the security level on the Security tab to Default Level Alternatively enable Active scripting from the Custom Level button Macintosh Disable proxy server settings 1 From the Safari menu click Preferences General screen is displayed 2 From the Advanced tab click the Change Settings button next to Proxies Click Proxies and set up a proxy server 3 Deselect the Web Proxy and Automatic Proxy Configuration boxes 4 Click Apply Now Enable JavaScript 1 Display Security of Safari 2 Select Enable JavaScript under Web c
6. DAY and PRESENT TIME are reset when leaving the display turned off for about 7 days for the following reasons Pressing switch of the unit to turn off the display Disconnecting the AC cord Interruption of power supply button Back PRESENT TIME 99 99 gt 27 PRESENT TIME Setup Setup TIMER Set up TIMER Set the program for turning the power On Off and select the input signal at the specified time Up to 20 programs can be set Setting Example Program 1 Every Monday 12 00 Power On Input HDMI Set up TIMER PRESENT TIME MON 0 03 Set the program number Timer Function To execute the program set to On Power Mode The program is disabled when Off is set Set the day The program is executed every day when Everyday is set Set the power On Off Set the time Pressing lt or gt button once changes Time 1 minute Pressing lt or gt button continuously changes Time by 15 minutes Set the input Notes e This function cannot be set unless PRESENT TIME Setup is set If more than one programs are set for the same time only the program with the smallest program number is enabled 28 Screensaver For preventing image retention Do not display a still picture especially in 4 3 mode for any length of time If the display must remain on a Screensaver should be used When the screen saver is operating the follo
7. the volume can only be adjusted between 0 and your maximum range e You can hear the changed volume regardless of your volume setting before opening the options menu if you adjust the volume when Initial VOL level is On and cursor is on the menu Press button to adjust the maximum volume Off lt gt On Off Sets auto maximum volume On Sets your preferred maximum volume Notes e If the Maximum VOL level is set lower than the Initial VOL level the Initial VOL level automatically becomes the same as the Maximum VOL level e The volume display can go up to 100 regardless of the settings e You can hear the changed volume regardless of your volume setting before opening the options menu if you adjust the volume when Maximum VOL level is On and cursor is on the menu Locks the input switch operation Off lt gt PC lt gt DVI lt gt HDMI1 lt gt HDMI2 Notes e Only the adjusted signal is displayed see page 16 e Input switch can be used when this is set to Off Options Adjustments tem Adjustments Off lt gt On lt gt MENU amp ENTER Off All the buttons on main unit can be used MENU ENTER I MENU amp ENTER Locks B and B buttons on main unit On Locks all the button on main unit except the Power switch Button lock Sets Button lock with the unit buttons in the following procedure INPUT EM ENTER E a Off Press o four times Pres
8. Searches all inputs and switches to an input with a signal Priority Searches Primary Input and Secondary Input in order and switches to an input with a signal Searching is displayed during the input search Primary Input Secondary Input Set the input to search when Priority is selected NONE lt gt PC lt gt DVI lt gt HDMI1 lt gt HDMI2 Note This menu is available only when Input lock is Off see page 43 45 Options Adjustments RS 232C LAN Information Timing Set up the informing manner for no signal or temperature rising While RS 232C controls Warning or error message sent on the display automatically While LAN controls Acquire the warning or error message from the display Options 2l RS 232C LAN Information Timing Press ACTION m button gt Eno Sinai waming mimino INET No Signal Error C init I Remote ID No Signal Error Timing ETO Serial ID Studio W B LAN Control Protocol Protocol 1 RS 232C LAN Information Timing Temperature Warning Temperature Warning Value Temperature Warning Release Value E No Signal Warning If set to On the display sends out the no signal warning E No Signal Warning Timing Set up the detecting time for no signal warning E No Signal Error If set to On the display sends out the no signal error E No Signal Error Timing Set up the detecting time for no signal error The w
9. or Off Press to select Start Time Finish Time When Time Designation is selected Press to select Periodic Time Operating Time When Interval is selected Press to select Screensaver duration When Standby after SCR Saver is selected Press to setup gt button Forward lt button Back RON y y Y Notes e Pressing or gt button once changes the Time 1 minute However switching occurs every 15 minutes when Periodic Time is selected e Pressing or gt button continuously changes the Time by 15 minutes e Screensaver duration of the Standby after SCR Saver can be set from 0 00 to 23 59 When this is set to 0 00 Standby after SCR Saver will not be activated Note Timer function will not work unless PRESENT TIME is set Wobbling Screensaver PRESENT TIME MON 15 00 Mode Time Designation Start Time Finish Time 4 RE D Screensaver PRESENT TIME MON 15 00 Mode Interval Screensaver PRESENT TIME MON 15 00 Mode EEIEIEE Screensaver duration Automatically shifts the display image therefore unnoticeable to the eye to prevent image retention of sharper contour of image 1 SET UP 7 Press to display the Setup menu 2 Press to select Wobbling Press to select On or Off On Shifts the position of the display image on a fixed time interval _ Press to exit
10. Output Select to AUDIO OUT in the Sound Adjustment menu see page 26 porma O O00000 far iar pi pi a a jar a DVI D IN Hom AVIN Stereo mini plug M3 HDMI connection Pin assignments and signal names Signal name Signal name T M D S Data2 T M D S Clock Shield T M D S Data2 Shield T M D S Clock T M D S Data2 CEC T M D S Data1 T M D S Data Shield Reserved N C on device T M D S Data1 T M D S Data0 SCL SDA P Stereophonic sound code audio equipment line in OO00 T M D S DataO Shield DDC CEC Ground T M D S Data0O 5V Power T M D S Clock Hot Plug Detect HDMI cable C Note AvouT Additional equipment and HDMI cable shown are not supplied with this set DVD player Exe fd fe Connections DVI D IN connection DVI D Input Connector Pin Layouts AR AAR Connection port view Notes e Additional equipment and cables shown are not supplied with this set 7 DVI video cable Within 5 m zZ PC with DVI D video out Stereo mini plug M3 D
11. Power Consumption Rated Power Consumption Stand by condition Power off condition Speakers 25 mm x 90 mm x 2 pcs Audio Output 20 W 10 W 10 W 10 THD 50 inch VA panel LED backlight 16 9 aspect ratio Screen size 43 1 W x 24 3 H x 49 5 diagonal 1 096 mm W x 616 mm H x 1 257mm diagonal No of pixels 2 073 600 1 920 W x 1 080 H 5 760 x 1 080 dots Operating condition Temperature 32 F 104 F 0 C 40 C Humidity 20 80 Applicable signals Scanning format 525 480 60i 60p 625 575 50i 50p 750 720 60p 50p 1125 1080 60i 60p 50i 50p 24p 25p 30p 24psF PC signals VGA SVGA XGA SXGA UXGA compressed Horizontal scanning frequency 30 110 kHz Vertical scanning frequency 48 120 Hz Connection terminals AV IN HDMI1 HDMI2 DVI D IN DVI D 24 Pin Compliance with DVI Revision 1 0 Content Protection Compatible with HDCP 1 1 Stereo mini jack M3 x 1 0 5 Vrms Shared with PC IN High Density Mini D sub 15 Pin G with sync 1 0 Vp p 75 Q G without sync 0 7 Vp p 75 Q B 0 7 Vp p 75 Q R 0 7 Vp p 75 Q HD VD 1 0 5 0 Vp p high impedance AUDIO Stereo mini jack M3 x 1 0 5 Vrms Shared with DVI D IN LAN RJ45 10BASE T 100BASE TX compatible with PJLink SERIAL External Control Terminal D sub 9 Pin RS 232C compatible AUDIO Stereo mini jack M3 x 1 0 5 Vrms OUT Output level Variable e 0 dB INPUT 1 kHz 0 dB
12. approved by ASTA or BSI to BS1362 Check for the ASTA mark gt or the BSI mark Y on the body of the fuse If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced If you lose the fuse cover the plug must not be used until a replacement cover is obtained A replacement fuse cover can be purchased from your local Panasonic dealer Do not cut off the mains plug Do not use any other type of mains lead except the one supplied with this display The supplied mains lead and moulded plug are designed to be used with this display to avoid interference and for your safety If the socket outlet in your home is not suitable get it changed by a qualified electrician If the plug or mains lead becomes damaged purchase a replacement from an authorized dealer How to replace the fuse Open the fuse compartment with a screwdriver and replace the fuse Safety Precautions WARNING E Setup This LCD Display is for use only with the following optional accessories Use with any other type of optional accessories may cause instability which could result in the possibility of injury All of the following accessories are manufactured by Panasonic Corporation Pedestals TY ST42PE7 for TH 42LFE7U E ER TH 50LFE7U E TY ST65PE7 for TH 65LFE7U E We are not responsible for any product damage etc caused by use of the pedestal or wall hanging bracket made by other companies or by failure
13. as STANDARD Dynamic For viewing in brighter environments Cinema For use in viewing tone focused pictures with brightness reduced Notes e If you would like to change the picture and colour of the selected Picture menu to something else adjust using the items in the Picture menu see next page e In ENGLISH US OSD language the Picture Mode is displayed as PICTURE MENU Press the left lt or right button to switch between modes gt Normal lt gt Warm lt gt Cool lt e In ENGLISH US OSD language the White balance is displayed as COLOR TEMP FRAME CREATION Improves motion picture quality by reducing motion blur Press the left lt or right button to switch between modes r gt Off lt gt Min lt gt Mid lt gt Max lt Notes The mode is memorized per input terminal e Even if Normalise is selected the Normal setting will not be restored e The picture and menu will disappear for a moment if you switch the mode to Off or switch from Off to another mode e FRAME CREATION is not available for 42 inch models Helpful Hint O I Normalization While the Picture menu is displayed if either the N button on the remote control is pressed at any time or the ACTION m button is pressed during Normalise then all adjustment values are returned to the factory settings 24 Picture Ad
14. cecceeeeeeeeeeeeeeeeeneees 47 Command Control iisen 48 PJLINK Protool racs andsa ea aaa 48 Using Web Browser Control cssseecessssseeeeeeees 49 Before Using Web Browser Control 49 Access from Web BrowSet se eeeeerteeeeeees 49 Display Control BASIC CONTROL OPTION CONTROL Screen rono nnn i a aena 50 NETWORK SETTING NETWORK SETTING Screen 51 Password Setting CHANGE PASSWORD Screen 51 Crestron Connected page cccccceeeseeeeeereeees 52 Troubleshooting eccccseeeeeeceseeeeeeeeneeeeeeeenneesenens 54 Applicable input Signals 0 ccccccesesssesseeeeereee 55 Shipping condition cece ceeeeeseeeseeeeeeeeeeeeeees 56 SPOCITICATIONS icc deccvses saeceees coc cesvevecesnennececes cucnesceetes 57 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING To reduce the risk of electric shock do not remove cover or back No user serviceable parts inside Refer servicing to qualified service personnel The lightning flash with arrow head within a triangle is intended to tell the user The exclamation point within a triangle is intended to tell the user that important that parts inside the product operating and servicing are a risk of electric shock instructions are in the papers to persons with the appliance WARNING To prevent damage which may result in fire or shock hazard do not expose this apparatus to rain or moisture Do not place containers with water fl
15. display Initial VOL level Maximum VOL level Options Press to display the SET UP menu Input Search On screen display Initial input Initial VOL level Maximum VOL level Input lock Button lock Press for more than 3 seconds Remocon User level 5V Charge Press to select OSD Language Press to select Options Options Press to display the Options menu sno Press to select your preferred menu RS 232C LAN Information Timing Press to adjust the menu Options 3 3 Power ON Screen Dela Off Clock Displa 4 ojii Power On Message No activity power off Function button assign 1 Function button assign 2 Power Switch Lock 1 Off D Adjustments Set auto input switching for when there is no signal see page 45 On Displays all the following on screen e Power on display e Input signal switch display e No signal display E e Mute and the remaining time of off timer after was pressed Off Hides all the items above from view Adjusts the input signal when the unit is turned on Off lt gt PC lt gt DVI lt gt HDMI 1 lt gt HDMI2 Notes e Only the adjusted signal is displayed see page 16 e This menu is available only when Input lock is Off VOL Press button to adjust the volume when the unit is turned on Off lt gt On Off Sets normal volume On Sets your preferred volume Notes e When Maximum VOL level is On
16. order to reduce a power load Sets panel ID number when panel is used in Remote ID or Serial ID Set value range 0 100 Standard value 0 The setting of this menu is valid only when using ID remote control Off Disables ID remote control functions You can use normal remote control operations On Enable ID remote control functions Note To use the ID remote control function it is necessary to set each ID number of remote control and display unit About the setting method please refer to ID Remote Control Function see page 36 and ID select above mentioned Sets the panel ID Control Off Disables external control by the ID On Enables the external control by the ID Off Nullify all the settings adjusted Studio W B On Sets the colour temperature for TV studio Note Valid only when the Warm is set as White balance in Picture menu LAN Control Select the LAN control protocol Protocol Protocol 1 Control with the Panasonic Display sequence Protocol 2 Control with the sequence that compatible with Panasonic Projector RS 232C LAN Information Timing Set up the informing manner if error warning occurred see page 46 Off lt gt 1 lt 2 lt gt 3 lt gt 30 You can set the power on delay time of the displays to reduce the power load when you press to turn on the multiple displays that are set together for example on MULTI DISPLAY system Set each display s sett
17. parameter for command INST Shutter control Parameter 10 Picture On picture mute deactivated 11 Picture Off picture on mute 20 Audio On audio mute deactivated 21 Audio Off audio on mute 30 Shutter mode Off picture and audio mute deactivated 31 Shutter mode On picture and audio on mute Shutter control query Parameter 11 Picture Off picture on mute 21 Audio Off audio on mute 30 Shutter mode Off picture and audio mute deactivated 31 Shutter mode On picture and audio on mute Error status query Parameter First byte 0 Second byte 0 Third byte 0 Fourth byte 0 Fifth byte 0 Sixth byte Means other error 0 or 2 Meaning of the 0 2 settings 0 Error is not detected 2 Error Lamp status query Not supported Input switch list query Parameter 11 PC IN input PC 31 HDMI1 input HDMI1 32 HDMI2 input HDMI2 32 DVI D IN input DVI Projector name query Return the Display name contents selected in Network Setup Manufacturer name query Returns Panasonic Model name query Returns 65LFE7U 65LFE7E for 65 inch model Other information query Returns version number Class information query Returns 1 PJLink security authentication Set panasonic for the PJLink password e PJLink is a pending trademark in Japan the United States and other countries or areas 48 Using Web Browser Control
18. remote control designed specifically for use with the unit is being used The unit cannot be operated by any other remote control A cracking sound is sometimes heard from the unit If there is nothing wrong with the picture or sound this is the sound of the cabinet undergoing very slight contractions in response to changes in the room temperature There are no adverse effects on the performance or other aspects The top or bottom of the picture on the screen is cut off when use the zoom function Adjust the position of the picture on the screen Areas at the top and bottom of the screen where the image is missing appear when use the zoom function When using a video software program such as a cinema size program with a screen wider than one in the 16 9 mode blank areas separate from the images are formed at the top and bottom of the screen can hear sounds coming from inside the unit When the power is turned on a sound of the display panel being driven may be heard This is normal and not indicative of malfunctioning Parts of the unit become hot Even when the temperature of parts of the front top and rear panels has risen these temperature rises will not pose any problems in terms of performance or quality Power automatically turns off unexpectedly Check the settings of No Signal power off PC Power management DVI D Power management and No activity power off Any of
19. the Display checked adjusted or repaired at your local Panasonic dealer If the Display is not going to be used for any prolonged length of time unplug the power supply plug from the wall outlet To prevent the spread of fire keep candles or other open flames away from this product at all times E if problems occur during use If a problem occurs such as no picture or no sound or if smoke or an abnormal odour starts to come out from the Display immediately unplug the power supply plug from the wall outlet If you continue to use the Display in this condition fire or electric shock could result After checking that the smoke has stopped contact your local Panasonic dealer so that the necessary repairs can be made Repairing the Display yourself is extremely dangerous and shall never be done If water or foreign objects get inside the Display if the Display is dropped or if the cabinet becomes damages disconnect the power supply plug immediately A short circuit may occur which could cause fire Contact your local Panasonic dealer for any repairs that need to be made Safety Precautions CAUTION E When using the LCD Display Do not bring your hands face or objects close to the ventilation holes of the Display e Heated air comes out from the ventilation holes at the top of Display will be hot Do not bring your hands or face or objects which cannot withstand heat close to this port otherwise burns or deformation c
20. the connection above CHARGE Terminals connection Power can be supplied when a separately sold stick PC or such other device is connected Note To supply power be sure to set SV Charge to On in the Options menu see page 44 Pin Layout and Signal Names of CHARGE Terminal CHARGE DC5V 00mA Or O SERIAL ai LAN PCIN AUDIO AUDIO OUT IN oHe DVI D IN y HDMI C AVIN stick PC y HDMI 2 g USB cable Up to 5V 500 mA power can be supplied to an external device when an image is received e If current exceeding the supply capacity flows output will be shut off and the following message will appear 5V CHARGE OUT overload Please remove cable then turn the display off on In this case turn the power off and on with the remote control etc Note If there is dust in a terminal the protection circuit may function Cover the terminals such as with tape when not in use The terminals are protected by tape when shipped from the factory 13 Power On Off Connecting the AC cord plug to the Display on Connecting the plug to the Wall Outlet Notes e Main plug types vary between countries The power plug shown at right may therefore not be the type fitted to your set e When disconnectin
21. them may be set to On Enable see page 31 32 There is no picture displayed or sound output sometimes When HDMI or DVI signals are input to the Display using a selector or distributor sound or images may not be output in the normal fashion depending on the selector or distributor used The symptoms may be improved by turning the power off and on again or by replacing the selector or distributor The RS 232C is uncontrollable Check whether the connection has been made properly see page 12 When controlling the RS 232C command on page 12 from the RS 232C terminal in the display make sure that Control I F Select is RS 232C see page 41 The LAN is uncontrollable Check whether the connection has been made properly see page 47 Check whether Control I F Select is LAN when controlling with the WEB browser control or the command control on page 48 see page 41 Check whether LAN Setup has been configured properly see page 42 When connecting to a device of AMX Crestron Electronics Inc set AMX D D Crestron Connected according to the device to use see page 41 This LCD Display uses special image processing Hence a slight time lag may occur between image and audio depending on the type of input signal However this is not a malfunction LCD Display panel Symptoms Check The screen darkens slightly when bright pictures with minimal movements a
22. with sufficient clarity The PC input terminals are DDC2B compatible If the computer being connected is not DDC2B compatible you will need to make setting changes to the computer at the time of connection Some PC models cannot be connected to the set e There is no need to use an adapter for computers with DOS V compatible Mini D sub 15P terminal The computer shown in the illustration is for example purposes only e Additional equipment and cables shown are not supplied with this set e Do not set the horizontal and vertical scanning frequencies for PC signals which are above or below the specified frequency range Signal Names for Mini D sub 15P Connector Pin No Signal Name Pin No Signal Name Pin No Signal Name GND Ground AD INC not connected D GND Ground SDA 0000 OOD OOO OGOOD Pin Layout for PC Input R D G B 8 GND Ground HD SYNC o ave eJ w CL Terminal GND Ground GND Ground 11 Connections SERIAL Terminals connection The SERIAL terminal is used when the Display is controlled by a computer Note To use serial control for this unit make sure to set the Control I F Select in the Network Setup menu to RS 232C see page 41 COMPUTER _ Male RS 232C Straight cable Bre l pi T 0 gt i Female D sub 9p Q mjg
23. z Notes none e Use the RS 232C straight cable to connect the computer to the Display e The computer shown is for example purposes only e Additional equipment and cables shown are not supplied with this set Pin layout for SERIAL Terminal The SERIAL terminal conforms to the RS 232C interface specification so that the Display can be controlled by a computer which is connected to this terminal The computer will require software which allows the sending and receiving of control data which satisfies the conditions given below Use a computer application such as programming language software Refer to the documentation for the computer application for details Communication parameters Signal names for SERIAL IN terminal Signal level RS 232C compliant Synchronization method Asynchronous Baud rate 9600 bps Parity None Character length 8 bits Stop bit 1 bit Flow control Details RXD TXD DTR GND DSR Pa Shorted in this set al NC These signal names are those of computer specifications Basic format for control data Command The transmission of control data from the computer Command Parameter Control details starts with a STX signal followed by the command the Power ON parameters and lastly an ETX signal in that order If there Power OFF are no parameters then the parameter signal does not Volume
24. 000 100 need to be sent Audio MUTE OFF STX C1 C2 C3 P1 P2 P3 P4 P5 ETX Audio MU TEON L R L Input select toggle Colon Parameter s End HDMI 1 input HDMI1 Start 3 character 1 5 bytes 03h HDMI 2 input HDMI2 02h command 3 bytes DVI D IN input DVI PC IN input PC Notes e If multiple commands are transmitted be sure to wait for the response for the first command to come from this unit before sending the next command e If an incorrect command is sent by mistake this unit will send an ER401 command back to the computer With the power off this display responds to PON command e Consult an Authorized Service Center for detail instructions only on command usage 12 Screen mode select toggle Zoom1 Connections IR IN OUT infrared signal connection Connect between the IR OUT terminal of the first display and the IR IN terminal of the second display with a 3 5 mm stereo mini plug Infrared signals will be sent from the first display to the second display a E First display Second display IR IR IR IR IN OUTG IN OUTG QQ Third display 1 eal wojo gE el J Stereo mini plug M3 IR of the second display will not work in this connection It is possible to configure a daisy chain connection by repeating
25. 10 kQ Load CHARGE 5 V 500 mA a 444 x 257 21 Dimensi ns eit 4 126 mm x 652 mm x 53 mm Mass weight approx 31 97 Ibs 14 5 kg Notes e Design and specifications are subject to change without notice Mass and dimensions shown are approximate e This equipment complies with the EMC standards listed below EN55022 EN55024 EN61000 3 2 EN61000 3 3 TYPE A Connector x 2 58 Specifications TH 65LFE7U TH 65LFE7E 110 127 V AC 50 60 Hz 220 240 V AC 50 60 Hz Power Consumption Rated Power Consumption Stand by condition Power off condition Speakers 22 mm x 90 mm x 2 pcs Audio Output 20 W 10 W 10 W 10 THD 65 inch VA panel LED backlight 16 9 aspect ratio Screen size 56 2 W x 31 6 H x 64 5 diagonal 1 428 mm W x 803 mm H x 1 638mm diagonal No of pixels 2 073 600 1 920 W x 1 080 H 5 760 x 1 080 dots Operating condition Temperature 32 F 104 F 0 C 40 C Humidity 20 80 Applicable signals Scanning format 525 480 60i 60p 625 575 50i 50p 750 720 60p 50p 1125 1080 60i 60p 50i 50p 24p 25p 30p 24psF PC signals VGA SVGA XGA SXGA UXGA compressed Horizontal scanning frequency 30 110 kHz Vertical scanning frequency 48 120 Hz Connection terminals AV IN HDMI1 HDMI2 DVI D IN DVI D 24 Pin Compliance with DVI Revision 1 0 Content Protection Compati
26. 24psF 24p 25p 30p 50p 60p Select Off when flickering is shown around the image e H Size and V Size cannot be adjusted when On is selected O IKON O Q 2 O off On Helpful Hint O Normalisation While the Pos Size display is active if either the N button on the remote control is pressed at any time or the ACTION m button is pressed during Normalise then all adjustment values except Clock Phase and Dot Clock are returned to the factory settings 23 Picture Adjustments 1 PICTURE o _ Press to display the Picture menu 2 Select to adjust each item Note O Picture Normalise Normal Picture Mode 100 ae W O So W White balance Advanced settings FRAME CFIEATION a Gay Press to enter Advanced SS Settings Advanced settings Enables fine picture adjustment at a professional level see next page Advanced settings Normalise Normal Press to select the menu to adjust Select the desired level by looking at the picture behind the menu Menu that cannot be adjusted is grayout Adjustable menu changes depending on signal input and menu setting Press the left lt 4 or right gt button to switch between modes m gt Normal lt gt Dynamic gt Cinema e Normal For viewing in standard environments In ENGLISH US OSD language this is displayed
27. Each value set for DHCP IP address Subnet mask and Gateway will be saved If NG is displayed check the same IP address is not used within the same network DHCP DHCP client function To obtain an IP address automatically using a DHCP server set this to On If DHCP server is not used set this to Off IP address IP address display and setting Enter an IP address if DHCP server is not used Subnet mask Subnet mask display and setting Enter a subnet mask if DHCP server is not used Gateway Gateway address display and setting Enter a gateway address if DHCP server is not used Notes Use 4 to select a digit Use AY to change a number Press m R Pressing O will cancel the port number change Port Set the port number used for command control The available setting range is 1024 65535 When the PJLink protocol is used the port setting is not necessary DUPLEX Set the connection speed of the LAN environment Select the value from Auto 10 HALF 10 FULL 100 HALF or 100 FULL Network ID Set the ID to identify this unit The available setting range is 0 99 MAC Address Display the MAC address of this unit However the MAC address is not displayed when the Control I F Select is set to RS 232C To use a DHCP server make sure the DHCP server is started e Contact your network administrator for details on settings 42 Options Adjustments On screen
28. F ADVISED OF THE POSSIBILITY OF SUCH DAMAGE 60 Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products packaging and or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste For proper treatment recovery and recycling of old products and used batteries please take them to applicable collection points in accordance with your national legislation and the Directives 2002 96 EC and 2006 66 EC By disposing of these products and batteries correctly you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling For more information about collection and recycling of old products and batteries please contact your local municipality your waste disposal service or the point of sale where you purchased the items Penalties may be applicable for incorrect disposal of this waste in accordance with national legislation For business users in the European Union If you wish to discard electrical and electronic equipment please contact your dealer or supplier for further information Information on Disposal in other Countries outside the European Union These symbols are only valid in the European Union If you wish to discard these items please contact your local authorities or dealer and a
29. Microsoft Corporation in the United States and or other countries e Macintosh Mac Mac OS OS X and Safari are the trademarks of Apple Inc registered in the United States and other countries e PJLink is a pending trademark in Japan the United States and other countries and regions e SVGA XGA SXGA and UXGA are registered trademarks of the Video Electronics Standard Association Even if no special notation has been made of company or product trademarks these trademarks have been fully respected e HDMI the HDMI Logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries RoomView Crestron RoomView and Fusion RV are registered trademarks of Crestron Electronics Inc and Crestron Connected is the trademark of Crestron Electronics Inc Important Safety Notice WARNING 1 To prevent damage which may result in fire or shock hazard do not expose this appliance to dripping or splashing Do not place containers with water flower vase cups cosmetics etc above the set including on shelves above etc No naked flame sources such as lighted candles should be placed on above the set 2 To prevent electric shock do not remove cover No user serviceable parts inside Refer servicing to qualified service personnel CAUTION This appliance is intended for use in environments which are relatively free of electromagnetic fields Using this a
30. Panasonic Model No TH 42LFE7U TH 42LFE7E TH 50LFE7U TH 50LFE7E TH 65LFE7U TH 65LFE7E TH 42LFE7ER Operating Instructions Homi Please read these instructions before operating your set and retain them for future reference Dear Panasonic Customer Welcome to the Panasonic family of customers We hope that you will have many years of enjoyment from your new LCD Display To obtain maximum benefit from your set please read these Instructions before making any adjustments and retain them for future reference Retain your purchase receipt also and note down the model number and serial number of your set in the space provided on the rear cover of these instructions Visit our Panasonic Web Site Table of Contents Before use http panasonic net e Illustrations and screens in this Operating Instructions are images for illustration purposes and may be different from the actual ones e Descriptive illustrations in this Operating Instructions are created mainly based on the 65 inch model Important Safety Instructions ssseesseeeeeeeeee 1 FOC STATEMENT vvstscdasccccvecseeccccesextsetecsccvsvestesieiavecies 2 Important Safety Notice ccccccceseeeeesesseeeeeeeeeeeees 3 Safety Precautions ccccceesseccceeeeeeeeeeesseeeeeeeeeeees 4 ACCESSOLSICS 2 cccecececeeeeseeeeeeeeeeeeeeeeeeeseeessaneeeeeeeeeeens 7 Accessories Supply eccecceceeeeeeeeeteeesesneeaeees 7 Remote Co
31. al 30 110 kHz Vertical 48 120 Hz H Freq 6398 kHz V Freq 6002 Hz Signal F x l The dot clock frequency is displayed during digital signal input ca H Freq 63 98 kHz Note V Freq 60 02 Hz The automatically detected signal format may be displayed differently than the Dot Clock Freq 108 0 MHz actual input signal Signal Format _4280 1024 60 40 Network Setup Configure the various settings required to use the network function Network Setup Network Setup MULTI DISPLAY Setup P Control I F Select AMX D D Set up TIMER ress et up RS 232C Crestron Connected PRESENT TIME Setup Network Setup Menu Display Duration Menu Transparenc LFE7 00 LAN Setup E Control I F Select Set whether to control with RS 232C or LAN When LAN is set power indicator lights orange under the condition of power off with remote control stand by state Note When the power indicator lights up orange 6 W of power is being consumed E Display Name The name of the Display that is shown on the network can be changed m LAN Setup See page 42 E AMX D D This function allows the Display to be detected by AMX Device Discovery For more details visit the following website http www amx com E Crestron Connected When this function is set to on the Display can be monitored or controlled via the network using equipment and application software of Crestron Electronics Inc This Display supports the f
32. arning of No Signal Warning and the error of No Signal Error are not sent when the no signal state is detected through any of the following functions No Signal power off Enable PC Power management DVI D Power management HDMI1 Power management HDMI2 Power management see page 32 Setting Example No Signal Warning Timing 5 minutes No Signal Error Timing 10 minutes PC Power management On 30 seconds If there is no signal when PC IN is input PC Power management is activated first and the Display enters the standby mode Note The No Signal Error Timing cannot be set shorter than No Signal Warning Timing E Temperature Warning If set to On the display sends out the warning temperature E Temperature Warning Value Set up the detecting temperature for temperature warning E Temperature Warning Release Value Set up the temperature to release the temperature warning 46 Using Network Function Network Connection This unit has a network function to control the network connected display with your computer Note To use the network function set each Network Setup setting and make sure to set the Control I F Select to LAN see page 41 When LAN is set power indicator lights orange under the condition of power Off with remote control stand by state Example of network connection COMPUTER LAN cable Display main unit rear Shielded oz z Use
33. as long as the power cord is still inserted into the wall outlet e Standby Red Orange When the control terminal selection is LAN See page 41 e Power ON Green e HDMI1 Power management HDMI2 Power management EE tea Orange With HDMI1 or HDMI2 input signal See page 32 PC Power management Remote Brightness Sensor i control sensor Detects the brightness in the ceses Orange With PC input signal viewing environment See page 32 See page 32 e DVI D Power management EE Orange With DVI input signal See page 32 External input terminals Connects such devices as video equipment or personal computers O see page 8 CHARGE DC5V 500mA SERIAL 5 oe a PCIN E eA Enter Aspect button see page 19 21 voume Adjustment Volume Up Down When the menu screen is displayed press to move the cursor up o press to move the cursor down see page 21 MENU Screen ON OFF Each time the MENU button is pressed the menu screen will switch see page 21 m gt Normal Viewing gt Picture gt Setup Sound lt Pos Size lt INPUT button Input signal selection see page 16 AUDIO AUDIO OUT IN DVI D IN y HDMI 1 E Hom AVIN
34. at the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 All advertising materials mentioning features or use of this software must display the following acknowledgement This product includes software developed by the University of California Berkeley and its contributors 4 Neither the name of the University nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN I
35. ayed Note Factory settings are as follows FUNCTION 1 button Signal FUNCTIONZ2 button Screensaver laine sith petal Use the FUNCTION button The menu screen is displayed Example Signal Signal Digital FUNCTION Cinema reality Auto H Freq 63 98 kHz V Freq 60 02 Hz Dot Clock Freq 108 0 MHz Signal Format 1280x1024 60 Press the FUNCTION button to exit from the menu Sets the lock setting for the display Power switch On Power switch operation is disabled Off Power switch operation is enabled Note This function is only for TH 42LFE7U TH 50LFE7U TH 65LFE7U Power Switch Lock Normalisation When both main unit buttons and remote control are disabled due to the Button lock Remocon User level or Remote ID adjustments set all the values Off so that all the buttons are enabled again Y R Press the g button on main unit together with O button on the remote control and hold for more than 5 seconds The Shipping menu is displayed and the lock is released when it disappears Input Search When a signal is not detected another input with a signal is automatically selected select adjust Options 1 3 Input Search Press ACTION m button gt Input Search 4 Input Search On screen display ona Initial input Primary Input Secondary Input Input Search Off When there is no signal the input is not switched automatically All Inputs
36. balance of the dark sections using the W B Low R W B Low G and W B Low B settings 3 Repeat steps 1 and 2 to adjust Steps 1 and 2 affect each other s settings so repeat each step in turn to make the adjustment e The adjustment values are memorized separately for each input terminal e The adjustment range values should be used as an adjustment reference Helpful Hint O Normalisation On the remote control unit while the Advanced settings menu is displayed if either the N button is pressed at any time or the ACTION m button is pressed during Normalise then all adjustment values are returned to the factory settings Sound Adjustment 1 SOUND Press to display the SOUND menu 2 Select to adjust each item S Press to select the menu to adjust 4 lt 3 SOUND gt Press to exit from adjust mode Katy Select the desired level by listening to the sound 2 Sound Normalise Normal Output Select SPEAKERS gt Sound Mode 4 Normal Treble Balance Surround Item Details SPEAKERS Emits sound from the built in speakers Output Select AUDIO OUT Emits sound through the AUDIO OUT terminal Normal Emits the original sound Sound Mode Dynamic Accentuates sharp sound Clear Attenuates human voice Bass Adjusts low pitch sounds Adjusts high pitch sounds Adjusts left and right volumes Notes e When AUDIO OUT is select
37. ble with HDCP 1 1 Stereo mini jack M3 x 1 0 5 Vrms Shared with PC IN High Density Mini D sub 15 Pin G with sync 1 0 Vp p 75 Q G without sync 0 7 Vp p 75 Q B 0 7 Vp p 75 Q R 0 7 Vp p 75 Q HD VD 1 0 5 0 Vp p high impedance AUDIO Stereo mini jack M3 x 1 0 5 Vrms Shared with DVI D IN LAN RJ45 10BASE T 100BASE TX compatible with PJLink SERIAL External Control Terminal D sub 9 Pin RS 232C compatible AUDIO Stereo mini jack M3 x 1 0 5 Vrms OUT Output level Variable c 0 dB INPUT 1 kHz 0 dB 10 kQ Load CHARGE 5 V 500 mA a 57 4 x 33 1 x 2 1 Dimensions WHD 1 458 mm x 840 mm x 52 mm Mass weight approx 73 85 Ibs 33 5 kg Notes e Design and specifications are subject to change without notice Mass and dimensions shown are approximate e This equipment complies with the EMC standards listed below EN55022 EN55024 EN61000 3 2 EN61000 3 3 TYPE A Connector x 2 59 lt Software Information for This Product gt This product has software installed partially licensed under the Free BSD LICENSE Free BSD LICENSE regulations under the above specifications are as follows These regulations are set by the third party therefore the original English regulations are stated Copyright 1980 1986 1993 The Regents of the University of California All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided th
38. ccviescesncsveiideedscvreaeastcvaes 28 Screensaver For preventing image retention 29 Setup of Screensaver Time cccccceeeeeeeeeeeeees 30 WODDIING iciccccecciceccescccciecesseceeesseesscteseseseecesesseaecsivs 30 No activity power Off ccsesseeeeseeeeeeeeseeneeeeeeeeees 31 ECO Mode SettingS cscccccesseeeeeeeeseeneeesseeneeeneees 32 Customizing the Input labels cceeeeeeeees 33 Selecting the On Screen Menu Language 34 Customizing the On Screen Menu Display 34 Setup for MULTI DISPLAY ccsccesseeeeeseeeeeseees 35 How to Setup MULTI DISPLAY eeeeeeees 35 ID Remote Control Function 36 Setup for Input Signals ccsseeseeeeeeeeeeeeeeees 37 YUV RGB IN Select siccstitntsistitiniie nen 37 Signal MENU ooo cece eee eeeeteeeeeeeeteeeeeeeeaeeees 38 Cinema really 3 ec scat vececdezsitenencaus oren 38 ACTIN ele e 39 MOVING asta shteedetelpeavtgeeen abeasbeniiumeatetae aesesbun aussie teens 39 HDMI RANG Esee n 40 Input signal display eecceeeeeteeeeeeeetteeeeeeenaees 40 Network Setup cccccccceceeeeesseeeeeeeeeeeeeeeeeeeeeeeeees 41 Options Adjustment cccccsssseeeeceeeseeeeeeeeeeneeees 43 Input SCAN Civ ssscanesstesrtaeweiss dacserssindededicsasgeereasccse 45 RS 232C LAN Information Timing ceeee 46 Using Network Function ccccccesssseeeeeeseeceeeeees 47 Network Connection 2
39. changed set items are displayed _ Password Setting CHANGE PASSWORD Screen _ Click CHANGE PASSWORD from the menu Password to access the Web browser control can be set When the password is changed in this screen the password used for command control and the PJULink security authentication is also changed a Item Details CE G Enter the ol Rene ewes lpassworp Mer the old password ee Enter th Ae PASSWORD nter the new password Notes NEW The default password is panasonic PASSWORD Enter the password entered in NEW Up to 32 alphanumeric characters can be used for a PASSWORD for confirmation password l Save the new password The e When the password is changed properly Password confirmation screen is displayed has changed message is displayed Click OK to change the password 51 Using Web Browser Control Crestron Connected page You can monitor or control the Display using Crestron Connected When you click Crestron Connected the Crestron Connected operation page is displayed If Adobe Flash Player is not installed in your computer or if the browser does not support Flash this page does not appear In this case return to the previous page by clicking Back in the operation page Operation page input Select _ y Tools page Click Tools on the operation page Note 1 Tools Info Help Switches the pages for tools information he
40. circuit different from that to which the receiver is connected e Consult the dealer or an experienced technician for help This device complies with Part15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation FCC CAUTION To assure continued compliance follow the attached installation instructions and use only shielded interface cables when connecting to computer or peripheral devices Any changes or modifications not expressly approved by Panasonic Corp of North America could void the user s authority to operate this device FCC Declaration of Conformity Model No TH 42LFE7U TH 50LFE7U TH 65LFE7U Responsible Party Panasonic Corporation of North America Two Riverfront Plaza Newark New Jersey 07102 5490 Contact Source Panasonic System Communications Company of North America 1 877 655 2357 CANADIAN NOTICE This Class B digital apparatus complies with Canadian ICES 003 Note Image retention may occur If you display a still picture for an extended period the image might remain on the screen However it will disappear after a while Trademark Credits e VGA is a trademark of International Business Machines Corporation e Microsoft Windows Windows Vista and Internet Explorer are the registered trademarks or trademarks of
41. e operation guide will be displayed During Digital Zoom only the following buttons can be operated Remote control POWER POS SIZE PICTURE SOUND SETUP E E m Voan AUTO ASPECT OFFTIMER SETUP D Gey C POSITION al ACTION button ZOOM 2 Select the area of the image to be enlarged Press on the enlargement location to select 4 gt The cursor will move Of TERA Select the magnification required for the enlarged display Each time this is pressed the magnification factor changes O7 is shown in the image being displayed x2 x4 x1 4 Return to normal display quit Digital Zoom R Press to exit from the Digital Zoom Notes e When power goes OFF including Off Timer operation Digital Zoom terminates e The Digital Zoom function cannot be selected while in the following operation state When MULTI DISPLAY Setup is On see page 35 When Screensaver is running See page 29 30 e While Digital Zoom is in operation Adjusting Pos Size cannot be used 20 On Screen Menu Displays Remote Control Unit POS SIZE PICTURE SOUND SETUP PEA oO F X VOL Press to select MENU Press several times Example Picture menu Each time the MENU button is pressed the menu screen will switch gt Normal Viewing gt Picture Sound lt Pos Size lt Setup lt 4 Di
42. ed RESPONSE SEE SEND Details Enter a command Use the same command used for the serial control see page 12 Response from the unit is displayed Command is sent and run Item COMMAND RESPONSE SEND Note After the settings are changed it may take a while till the display s response is displayed Using Web Browser Control NETWORK SETTING NETWORK SETTING Screen Click NETWORK SETTING from the menu Various settings of a network can be set For the details of the setting items please check LAN Setup under the Network Setup of the unit see page 42 DHCP OFF OON Item Details i OO Set to ON when a DHCP server is Co ARE used or OFF when it is not used 192 168 0 1 ua IP ADDRESS Enter an IP address AUTO O10 HALF O10 FULL 100 HALF 100 FULL SUBNET MASK Enter a subnet mask DETO RAID GATEWAY Enter a gateway address Enter the port number used for PORT command control The available Notes setting range is 1024 65535 To use a DHCP server make sure the DHCP server LANISBEED Set the connection speed of the LAN is started environment During a DHCP server is used IP ADDRESS NETWORK ID Set the ID to identify this unit The SUBNET MASK and GATEWAY values cannot be available setting range is 0 99 entered SAVE Save the each set value When the set values are changed properly NETWORK SETTING CHANGED message and the
43. ed the items other than Balance cannot be adjusted e Bass Treble and Surround settings are memorized separately for each Sound Mode Helpful Hint O Normalisation While the Sound menu is displayed if either the N button on the remote control is pressed at any time or the ACTION button is pressed during Normalise then all adjustment values are returned to the factory settings 26 PRESENT TIME Setup Set up TIMER The timer can switch the Display On or Off a5 Saup Before attempting Timer Set confirm the PRESENT TIME and adjust if necessary MULTI DISPLAY Setup Then set POWER ON Time POWER OFF Time 4 SET UP 3 Press to display the Setup menu Press to select Set up TIMER or PRESENT TIME Setup Press to display the Set up TIMER screen or PRESENT TIME Setup screen PRESENT TIME Setup Menu Transparency 1 Press to select DAY or PRESENT TIME PRESENT TIME Setup Press to setup DAY or PRESENT TIME z PRESENT TIME MON 99 99 i et gt button Forward Se ee isi Notes e Pressing lt or gt button once changes PRESENT TIME 1 minute e Pressing lt or gt button continuously changes PRESENT TIME by 15 minutes Press to select Set Press to store PRESENT TIME Setup Notes e Set cannot be selected unless PRESENT TIME is set e Unless setting the present time other than 99 99 DAY and PRESENT TIME can not be set e The settings of
44. es each time the ENTER button is INPUT Y pressed FUNCTION D a CT DE Panasonic v Ch DISPLAY Note The aspect mode is memorized separately for each input terminal Aspect mode Picture Enlarged screen Description The display of the pictures fills the screen In the case of SD signals pictures with a 4 3 aspect ratio are enlarged horizontally and displayed This mode is suited to displaying anamorphic pictures with a 16 9 aspect ratio O_O e Q 2 O Pictures with a 4 3 aspect ratio are displayed with their original aspect ratio Side panels are displayed at the left and right edges of the screen zo E Pictures with a 16 9 aspect ratio are displayed with their original aspect ratio The left and right edges of the pictures are masked by side panels Letterbox pictures with a 16 9 aspect ratio are enlarged vertically and horizontally so that their display fills the screen The top and bottom edges of the pictures are cut off Letterbox pictures with a 16 9 aspect ratio are enlarged vertically and horizontally so that their display fills the screen The top and bottom edges as well as the left and right edges of the pictures are cut off 19 Digital Zoom This displays an enlargement of the designated part of the displayed image 1 Display the operation guide ZOOM Press to access Digital Zoom Th
45. format 525 480 60i 60p 625 575 50i 50p 750 720 60p 50p 1125 1080 60i 60p 50i 50p 24p 25p 30p 24psF PC signals VGA SVGA XGA SXGA UXGA compressed Horizontal scanning frequency 30 110 kHz Vertical scanning frequency 48 120 Hz Connection terminals AV IN HDMI1 HDMI2 DVI D IN DVI D 24 Pin Compliance with DVI Revision 1 0 Content Protection Compatible with HDCP 1 1 Stereo mini jack M3 x 1 0 5 Vrms Shared with PC IN High Density Mini D sub 15 Pin G with sync 1 0 Vp p 75 Q G without sync 0 7 Vp p 75 Q B 0 7 Vp p 75 Q R 0 7 Vp p 75 Q HD VD 1 0 5 0 Vp p high impedance AUDIO Stereo mini jack M3 x 1 0 5 Vrms Shared with DVI D IN LAN RJ45 10BASE T 100BASE TX compatible with PJLink SERIAL External Control Terminal D sub 9 Pin RS 232C compatible AUDIO Stereo mini jack M3 x 1 0 5 Vrms OUT Output level Variable c 0 dB INPUT 1 kHz 0 dB 10 kQ Load CHARGE 5 V 500 mA 38 0 x 22 3 x 3 1 Dingnsions We HR 963 mm x 566 mm x 77 mm Mass weight approx 20 94 Ibs 9 5 kg Notes e Design and specifications are subject to change without notice Mass and dimensions shown are approximate e This equipment complies with the EMC standards listed below EN55022 EN55024 EN61000 3 2 EN61000 3 3 TYPE A Connector x 2 57 Specifications ee TH SOLFETU TH SOLFETE 110 127 VAC 50 60 Hz 220 240 V AC 50 60 Hz
46. from adjust mode Notes e If MULTI DISPLAY Setup is set to On this function does not operate e When this function is operating part of the screen may appear to be missing 30 Wobbling off YUV RGB in select RGB No activity power off Disable OSD Language English UK No activity power off 1 Press to select the menu to adjust Setup E gt Signal Screensaver Input label Cv YUV RGB in select No activity power off Press to select Enable or Disable Disable 2 English UK lt gt sot 3 SET UP _ Press to exit from Setup When this function is set to Enable the power is turned off standby automatically when there is no operation of the Display for 4 hours Starting from 3 minutes before the turn off the remaining time will be displayed Press any key to abort No activity power off 3min When the power is turned off due to this function a message Last turn off due to No activity power off is displayed next time the power is turned on Note During the screensaver is running this function is disabled 31 ECO Mode settings ECO Mode settings SET UP ECO Mode OTe Press select ECO Mode settings in manea Enable Setup menu and press button Off On DVI D Power management select ay adjust ey Power save ECO Mode Custom The menu
47. g the AC cord be absolutely sure to disconnect the AC cord plug at the socket outlet first Press the Power switch on the Display to turn the set on Power On Power Indicator Green POWER Press the button on the remote control to turn the Display off Power Indicator Red standby Press the button on the remote control to turn the Display on Power Indicator Green Turn the power to the Display off by pressing the switch on the unit when the Display is on or in standby mode Note During operation of the power management function the power indicator turns orange in the power off state 14 Remote Control Sensor Power Indicator POWER AUTO SPECT OFF TIMER SETUP elol o POS SIZE PICTURE SOUND SETUP E VOL gt a gt INPUT M RECALL FUNCTION ZOOM 1 2 Panasonic DISPLAY Power On Off When first switching on the unit Following screen will be displayed when the unit is turned on for the first time Select the items with the remote control Unit buttons are invalid OSD Language OSD Language K __Frangais_ Select the language ____Espafiol_ f PRESENT TIME Setup Select DAY or PRESENT TIME PRESENT TIME Setup PRESENT TIME MON 99 99 Set DAY MON D PRESENT TIME 99 99 D PRESENT TIME Setup PRESENT TIME MON 99 99 TUE PRESENT TIME 10 00 e Once the items are set the screens won t be displayed when switch
48. gnals Signal name Horizontal frequency kHz Mark Applicable input signal Vertical frequency Hz DVI D IN Dot clock MHz 525 480 60i 15 73 59 94 27 0 525 480 60p 31 47 59 94 27 0 625 575 50i 15 63 50 00 15 63 50 00 27 0 625 575 50p 31 25 50 00 625 576 50p 31 25 50 00 27 0 625 576 50i 750 720 60p 45 00 60 00 750 720 50p 37 50 50 00 CO CO Ni Od On AI Co Po gt 1 125 1 080 60p 67 50 60 00 1 125 1 080 60i 33 75 60 00 1 125 1 080 50p 56 25 50 00 1 125 1 080 50i 28 13 50 00 HL 1 125 1 080 24psF 27 00 48 00 1 125 1 080 30p 33 75 30 00 1 125 1 080 25p 28 13 25 00 1 125 1 080 24p 27 00 24 00 55 Shipping condition This function allows you to reset the unit to the factory setting 1 SET UP Setup 7 7 Press to display the Setup menu 2 Press to select OSD Language Screensaver yN Input label QE ZS Press for more than 3 seconds RGB No activity power off Disable OSD Language English UK gt 3 Z5 Press to select Shipping Fe m gt cay Press to display the Shipping menu 4 ZS Press to select Yes SL 5 Wait for 10 seconds Shipping Yes No
49. his is not considered as malfunction PC signals Signal name 640x400 70Hz Horizontal frequency kHz Applicable input signals Vertical frequency Hz Mark Applicable input signal PC IN Dot clock MHz 25 17 DVI D IN Dot clock MHz 640x480 60Hz 25 18 25 18 640x480 72Hz 31 5 640x480 75Hz 640x480 85Hz 800x600 56Hz 800x600 60Hz 800x600 72Hz C OCO N OD on A oo Po gt 800x600 75Hz 800x600 85Hz 852x480 60Hz 34 24 1024x768 50Hz 1024x768 60Hz 65 0 65 0 1024x768 70Hz 75 0 1024x768 75Hz 78 75 1024x768 85Hz 94 5 1066x600 60Hz 53 0 1152x864 60Hz 81 62 1152x864 75Hz 108 0 1280x768 60Hz 80 14 1280x960 60Hz 108 0 1280x960 85Hz 1280x1024 60Hz 108 0 108 0 1280x1024 75Hz 148 5 135 0 1280x1024 1366x768 50Hz 69 92 1366x768 60Hz 86 71 87 44 1400x1050 60Hz 122 61 1600x1200 60Hz 162 0 162 0 1920x1080 60Hz 148 5 148 5 1920x1200 60Hz Macintosh13 640x480 30 24 Macintosh16 832x624 57 28 Macintosh21 1152x870 1 Not compatible with SYNC ON G e The signal format automatically detected may differ from the actual input signal in display Component si
50. ing be sure to make each adjustment such as Auto Setup on the Pos Size menu as necessary see page 22 Sync This function operates only during input from PC IN terminal Press to select the Sync Signal RGB Sot Press to adjust ji OF Sync Off OY 1024x768 Confirm that the input is set to RGB input this setting is valid only for RGB input signal Auto The H and V sync or synchronized signal is automatically selected If both input it is selected the H and V sync However the synchronized signal that is input first is selected on G Uses a synchronized signal on the Video G signal which is input from the G connector 39 Setup for Input Signals HDMI Range Switches the dynamic range according to the input signal from HDMI terminal Press to select HDMI Range Press to select Video 16 235 Full 0 255 Auto Signal Digital Off HDMI Range Video 16 235 If the input signal is the video range Example HDMI terminal output for DVD player Full 0 255 If the input signal is full range Example HDMI terminal output for personal computer Auto Switches the dynamic range automatically between Video 16 235 and Full 0 255 according to the input signal Note This function can be set to the HDMI signal Input signal display Displays the frequency and the type of the current input signal Display range PC input signal Horizont
51. ing individually Power ON Screen Off The display will be turned on at the same time as is pressed Delay 1 to 30 sec Set the power on delay time second After pressing the display will be powered on with time delay depending on this setting Initial Power Mode Remote ID Notes During this function is working the power indicator is blinking green e This function also works when the power recovers from failure or after plugging off and in again the power cord Whether to show hide No activity power off Precautions at the time of power ON is set Power On Message On The warning precautions are shown at the time of power ON No activity power Off The warning precautions are not shown at the time of power ON off Note This setting is enabled only if No activity power off is Enable see page 31 Off Not display the clock On Display the clock sak The clock is displayed at the lower left of the screen when button is pressed Clock Display Note When PRESENT TIME Setup is not set the clock is not displayed even if Clock Display is On see page 27 Options Adjustments item Adjustments FUNCTION Set the functions that operates when 1 QJ is pressed Signal The SIGNAL menu is displayed Screensaver The SCREENSAVER menu is displayed ECO menu The ECO MODE SETTINGS menu is displayed Set up TIMER The Set up TIMER menu is displ
52. ing on the unit next time e After the setting the items can be changed in the following menus OSD Language see page 34 PRESENT TIME Setup see page 27 Power ON warning message The following message may be displayed when turning the unit power ON No activity power off Precautions ee ees E E If No activity power off in Setup menu is set to Enable a warning message is displayed every time the power is turned ON see page 31 This message display can be set with the following menu Options menu Power On Message see page 44 15 Selecting the input signal INPUT Note Selecting is also possible by pressing the INPUT button on the unit 16 POWER POS SIZE PICTURE SOUND SETUP Press to select the input signal to be played back from the equipment which has been connected to the Display AUTO ASPECT OFF TIMER SETUP cy O E Input signals will change as follows ie HDMI1 gt HDMI2 gt PC gt DVI HDMI1 HDMI input terminal in AV IN HDMI1 HDMI2 HDMI input terminal in AV IN HDMI2 2 x PC PC input terminal in PC IN DVI DVI input terminal in DVI D IN tase FUNCTION ZOOM Basic Controls Main Unit Power Indicator The Power Indicator will light e Power OFF Indicator not illuminated The unit will still consume some power
53. ion when moving the cart apparatus A combination to avoid injury from tip over 13 Unplug this apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a
54. justments 7 f e You can change the level of each function Backlight lt gt Adjusts luminance of the back Backlight Contrast Brightness Sharpness Darker Brighter _ light for each Picture Mode lt q P Selects the ore bright e The setting details for normal dynamic Contrast 1E PIOPST nee and cinema respectively are memorized Less More and density for the room separately for each input terminal lt gt Adjusts for easier viewing of s Backlight can be adjusted when ECO Brightness dark pictures such as night Mode is set to Custom and Power save Darker Brighter scenes and black hair to Off see page 32 Colour lt gt Adjusts colour saturation Less More lt gt Less More Adjusts picture sharpness In ENGLISH US OSD language this is displayed as PICTURE Advanced settings Input level Adjustment of parts which are extremely bright and hard to see S Curve lt gt 2 0 lt gt 2 2 lt Adjusts the white balance for light red areas Adjusts the white balance for light green areas Adjusts the white balance for light blue areas Adjusts the white balance for dark red areas Adjusts the white balance for dark green areas Adjusts the white balance for dark blue areas Notes e Carry out W B adjustment as follows 1 Adjust the white balance of the bright sections using the W B High R W B High G and W B High B settings 2 Adjust the white
55. l remote control except for the button ID Cancellation INPUTS MIG Cs H CI INPUT A Z Eag eA le NORMAL 4 p ID MULTI PIP SWAP SELEC Nee ZOOM Panasonic DISPLAY T Press button on remote control This has the same effect as pressing the Co CO buttons at the same time Notes e Set the Remote ID On to operate the ID remote control If Remote ID is set to On you can use the remote control without identical ID number during option menu display see page 44 e The ID remote control cannot be used when ID select is set to anything other than 0 and the remote control ID is not the same as the ID select number see page 44 36 Setup for Input Signals YUV RGB IN select Select to match the signals from the source connected to DVI D IN terminal YUV signals gt YUV RGB signals gt RGB y Press to display the Setup menu Screensaver Input label Press to select the YUV RGB in select ECO Mode settings Wobbling off YUV RGB in select YUV lt gt RGB No activity power off Press to select the desired mode Disable OSD Language English UK gt Press to exit from adjust mode 37 Setup for Input Signals Signal menu Note Signal setup menu displays a different setting condition for each input signal S slo Press to display the Setup menu Press to
56. lp using the tab 2 POWER Switches between on and off of the power 3 VOL DOWN AV MUTE VOL UP Sets the volume AV mute When the power of the Display is turned off VOL DOWN AV MUTE and VOL UP are not available 4 Input Select Sets the input selection When the power of the Display is turned off this operation is not available 5 Operation buttons on the menu screen Operates on the menu screen 6 Image quality adjustments Operate items related to image quality 7 Back Returns to the previous page 1 Control system Sets the information required for the communication with the controller that is connected to the Display 2 User Password Sets the password for the user rights in the operation page of Crestron Connected 3 Admin Password Sets the password for the administrator rights in the operation page of Crestron Connected 4 Network status Displays the setting of LAN DHCP Displays the value in the current setting lpAddress Displays the value in the current setting SubnetMask Displays the value in the current setting DefaultGateway Displays the value in the current setting 5 Exit Return to the operation page When you monitor or control the Display using Crestron Connected set Crestron Connected to On in the Network Setup menu see page 41 52 Info page Click Info on the operation page Help page Click Help on the operation page The Help Desk screen is displayed U
57. matically When no pictures are detected for 30 or so seconds during PC signal input Power is turned off standby the power indicator lights up orange When pictures are subsequently detected Power is turned on the power indicator lights up green Notes e This function operates only during input from PC IN terminal e This function is effective when Sync is set to Auto and during normal viewing DVI D Power management When this function is set to On it operates under the following conditions to turn the power on or off automatically When no pictures sync signal are detected for 30 or so seconds during DVI signal input Power is turned off standby the power indicator lights up orange When pictures sync signal are subsequently detected Power is turned on the power indicator lights up green Notes e This function operates only during DVI signal input e When the power indicator lights up orange approx 0 7 W of power is being consumed Power save This function adjusts the brightness of the backlight to reduce power consumption Off This function does not operate On Backlight brightness is reduced Sensor The backlight brightness is automatically adjusted according to the viewing environment Note When this function is set to On or Sensor the Backlight setting in the Picture menu is disabled 32 Customizing the Input labels This function can change the label of the Input sig
58. may be adversely affected If the cabinet becomes dirty wipe it with a soft dry cloth e If the cabinet is particularly dirty soak the cloth in water to which a small amount of neutral detergent has been added and then wring the cloth dry Use this cloth to wipe the cabinet and then wipe it dry with a dry cloth e Do not allow any detergent to come into direct contact with the surface of the Display If water droplets get inside the unit operating problems may result e Avoid contact with volatile substances such as insect sprays solvents and thinner otherwise the quality of the cabinet surface may be adversely affected or the coating may peel off Furthermore do not leave it for long periods in contact with articles made from rubber or PVC Usage of a chemical cloth e Do not use a chemical cloth for the panel surface e Follow the instructions for the chemical cloth to use it for the cabinet Notes before use The usage environment of the liquid crystal panel may have an effect on the screen display In addition depending on the viewing angle changes in hue or irregularities in brightness may occur e Please note that this is a characteristic of the liquid crystal panel and not a malfunction Accessories Accessories Suppl Check that you have the accessories and items shown v Operating Instruction book CD ROM Remote Control Batteries for the Remote Operating Transmitter Control T
59. nal to be displayed see page 16 1 SET UP a Press to display the Setup menu Press to select Input label R YUV RGB in select i777 Press to display the Input label screen RGB No activity power off Disable OSD Language English UK Press to select image input ey Press to change input label a Input label Image input Input label PC PC DVD1 DVD2 DVD3 Blu ray1 Blu ray2 Blu ray3 CATV VCR STB Skip DVI DVI DVD1 DVD2 DVD3 Blu ray1 Blu ray2 Blu ray3 CATV VCR STB Skip HDMI1 HDMI1 DVD1 DVD2 DVD3 Blu ray1 Blu ray2 Blu ray3 CATV VCR STB Skip HDMI2 HDMI2 DVD1 DVD2 DVD3 Blu ray1 Blu ray2 Blu ray3 CATV VCR STB Skip Skip The INPUT button press will skip its input 33 Selecting the On Screen Menu Language 4 Press to display the Setup menu Press to select the OSD Language Press to select your preferred language E Selectable languages English UK ana Signal e igna Deutsch Screensaver Input label ECO Mode settings Fran ais Wobbling Off t YUVIRGB in select Italiano RO No activity power off Disable Espa ol ENGLISH US t PpX Chinese AAS B Japanese Pycckui Russian Customizing the On Screen Menu Display Set the display time and background transparency of the on screen menu display 1 SETUP so Press to di
60. ntrol Batteries 0 cceeeceeeeeeereeeees 7 CON MOCHIONS wiiic cnc cciteccecseccicececceccsseessnceweeceaeceevereesarane 8 AC Cord Connection ccccceceeeeeeeeeeeeeseneneaeees 8 Video equipment connection eeeeeeeeees 8 AUDIO OUT CONNEC OM iriiria nsina 9 HDMI Connection ce eeeeeceecceeeeeeeeeeeteeeeseneaeees 9 DVI D IN Connection c ceeecceeeeeeeeeeeeeeeeeneees 10 PC Input Terminals connection 00ceee 11 SERIAL Terminals Connection ccccceceeeeeees 12 IR IN OUT infrared signal connection 4 13 CHARGE Terminals connection seeee 13 Power On Off i ccccccceceeeeeeeeeeeeeneeeeeeeeeeeeeeeeeseeenenees 14 Selecting the input Signal cccsssseeessseseeeees 16 BaSic Controls i coicisicesccvsiivncecessnctescccnederesavtdaanteceere 17 ASPECT Contr lS ssisiicccccsccssccsscctecstcesacdscasceescciacceesrs 19 Digital ZOO Msns 20 On Screen Menu Displays cccsssseceeessseeeeeeees 21 Adjusting Pos Size cesseeceseeeeeeeeeseeeeeeeneeeeeeeeens 22 Picture AdCjUStMeNts ccceeeeeeeeeeeseeeeeeeeeeeneeeeeeeeees 24 Advanced SettingS 0 ccceeceeeeeeteeeeeeeetteeeeeeenaaes 25 Sound AdjustMent ccccceeeeeeeeeeeeeneeeeeeeneereeeenees 26 PRESENT TIME Setup Set up TIMER 27 PRESENT TIME Setup cc ccccccsssseeeessseeeeeeeees 27 Setup TIMER os cicisssescvivasses
61. o Setup cannot adjust correctly select Normalise once and press ACTION m then adjust Pos Size manually If the picture goes off screen in the horizontal direction as a result of performing Auto Setup perform Dot Clock adjustment 22 H Pos H Size Clock Phase Dot Clock Over scan 1 1 Pixel Mode Adjusting Pos Size Adjust the horizontal position V Pos Adjust the vertical position gt g i C va Ne g 8 i O O 8 2 ae Q O O gt t Adjust the horizontal size V Size Adjust the vertical size i t OJA O Terl y 0 0 veri ey gey 0 0 t During PC input signal Eliminate the flickering and distortion During PC input signal Periodic striped pattern interference noise may occur when a striped pattern is displayed If this happens adjust so that any such noise is minimized Turn image over scan On Off Configurable signals are as follows 525i 525p 625i 625p 750 60p 750 50p DVI HDMI et On Off Notes e Off is effective during only 16 9 aspect mode e When Off is set H Size and V Size cannot be adjusted Adjusts the display size when 1125i or 1125p signal is input Notes e On is effective during only 16 9 aspect mode e Select On when you would like to replay 1920 x 1080 input signal e Applicable input signal 1125 1080 50i 60i
62. of power consumption reduction is individually set On The following fixed values are set to the menu of power consumption reduction Individual setting is not available No Signal power off Enable PC Power management On DVI D Power management On Power save Sensor Using Remote Control When ace is pressed the ECO Mode setting ECO Mode LJ changes Custom settings The menu of the power consumption reduction is individually set This setting is enabled when ECO Mode is set to Custom No signal power off Equipment power supply is turned Off when there is no signal When this is set to Enable the power supply of the unit goes Off 10 minutes after the input signals stop HDMI1 Power management HDMI2 Power management When this function is set to On it operates under the following conditions to turn the power on or off automatically When no pictures sync signal are detected for 30 or so seconds during HDMI1 or HDMI2 signal input Power is turned off standby the power indicator lights up orange When pictures sync signal are subsequently detected Power is turned on the power indicator lights up green Notes e This function operates only during input from HDMI IN terminal e When the power indicator lights up orange approx 0 7 W of power is being consumed PC Power management When this function is set to On it operates under the following conditions to turn the power on or off auto
63. ollowing application software from Crestron Electronics Inc e RoomView Express e Fusion RV e RoomView Server Edition Crestron Connected is a function to connect to a system developed by Crestron Electronics Inc which manages and controls multiple system devices connected to the network e For details of Crestron Connected refer to the Crestron Electronics Inc website Provided only in English http www crestron com For the download of RoomView Express refer to the Crestron Electronics Inc website Provided only in English http www crestron com getroomview 41 Network Setup E LAN Setup Detailed network settings for the LAN established via the LAN terminal of the Display or twisted pair cable transmitter can be configured Select LAN Setup and press LAN Setup Save BE O A O 192 168 0 1 1 Set DHCP manually IP address 192 168 0 8 DUPLEX Network ID MAC Address Port setting DHCP IP address Subnet mask and Gateway settings When Off is selected IP address and other settings can be set 2 Select the item and press 3 Enter an address i Use 4 P to select a digit Use F to change a number Press m R Pressing O will cancel the address change 4 Select Save and press 1 Select Port and press 2 Enter a port number Port 1024 Save Save the current network Setup
64. ontent Access from Web Browser Access to the TOP screen of the Web browser control using a Web browser 1 Start your Web browser 2 Enter the IP address set with the LAN Setup of the unit see page 42 http 192 168 0 8 3 Enter the user name and password when the Authentication screen is displayed Authentication screen Windows Security j The server 192 168 0 8 at Panasonic Display Control requires a username and password ser name W Pass ord Remember my credentials OK Cancel 4 Click OK After logged in the TOP screen of the Web browser control is displayed see page 50 Notes e The password used here is the same password used for command control and the PJLink security authentication e Default user name and password are as follows User name user1 Password panasonic e The password can be changed on the Password Setup screen after logging in see page 51 The user name cannot be changed e Under no circumstances Panasonic Corporation or it s associated companies will ask customers their password directly Even if you are asked directly please do not reveal your password 49 Using Web Browser Control TOP screen structure of the Web browser control After logging in the TOP screen of the Web browser control is displayed INPUT SELECT POWER NG ASPECT Ful NORM Menu Menu items are dis
65. ould result Be sure to disconnect all cables before moving the Display e If the Display is moved while some of the cables are still connected the cables may become damaged and fire or electric shock could result Disconnect the power supply plug from the wall socket as a safety precaution before carrying out any cleaning e Electric shocks can result if this is not done Clean the power cable regularly to prevent it becoming dusty e If dust built up on the power cord plug the resultant humidity can damage the insulation which could result in fire Pull the power cord plug out from the wall outlet and wipe the mains lead with a dry cloth Do not burn or breakup batteries e Batteries must not be exposed to excessive heat such as sunshine fire or the like Cleaning and maintenance The front of the display panel has been specially treated Wipe the panel surface gently using only a cleaning cloth or a soft lint free cloth e If the surface is particularly dirty wipe with a soft lint free cloth which has been soaked in pure water or water in which neutral detergent has been diluted 100 times and then wipe it evenly with a dry cloth of the same type until the surface is dry e Do not scratch or hit the surface of the panel with fingernails or other hard objects otherwise the surface may become damaged Furthermore avoid contact with volatile substances such as insect sprays solvents and thinner otherwise the quality of the surface
66. ower vase cups cosmetics etc above the set including on shelves above etc WARNING To prevent electric shock do not remove cover No user serviceable parts inside Refer servicing to qualified service personnel Important Safety Instructions 1 2 Keep these instructions Read these instructions 3 Heed all warnings 4 Follow all instructions 5 Do not use this apparatus near water 6 Clean only with dry cloth 7 Do not block any ventilation openings Install in accordance with the manufacturer s instructions 8 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caut
67. played When a button is clicked setup screen of each item is displayed item Details Sd BASIC CONTROL BASIC CONTROL screen is displayed see below OPTION CONTROL screen is CONTROL NETWORK CHANGE displayed see below Network Setup screen is displayed see page 51 Password setup screen is displayed see page 51 The Crestron Connected operations screen will appear see pages 52 53 e This button does not appear when Crestron Connected in Network Setup is OFF see page 41 According to the selected item from the menu setup status or set items are displayed Network ID information ID to identify the unit is displayed Display Control BASIC CONTROL OPTION CONTROL Screen Click BASIC CONTROL or OPTION CONTROL from the menu Various controls of the unit can be set BASIC CONTROL screen Click BASIC CONTROL from the menu Unit status and buttons to change settings are displayed STATUS CONTROL INPUT SELECT AUDIO MUTE OFF ON ROTATION Details Switch ON OFF of the unit power Switch the input signals Displayed buttons vary according to the connection status of the video device Switch ON OFF of the sound mute Switch the screen modes POWER INPUT SELECT AUDIO MUTE ASPECT 50 OPTION CONTROL screen Click OPTION CONTROL from the menu Command input field for command control of the unit is display
68. ppliance near sources of strong electromagnetic fields or where electrical noise may overlap with the input signals could cause the picture and sound to wobble or cause interference such as noise to appear To avoid the possibility of harm to this appliance keep it away from sources of strong electromagnetic fields IMPORTANT INFORMATION If a display is not positioned in a sufficiently stable location it can be potentially hazardous due to falling Many injuries particularly to children can be avoided by taking simple precautions such as e Using cabinets or stands recommended by the manufacturer of the display e Only using furniture that can safely support the display e Ensuring the display is not overhanging the edge of the supporting furniture e Not placing the display on tall furniture for example cupboards or bookcases without anchoring both the furniture and the display to a suitable support Not standing the displays on cloth or other materials placed between the display and supporting furniture Educating children about the dangers of climbing on furniture to reach the display or its controls IMPORTANT THE MOULDED PLUG FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY This display is supplied with a moulded three pin mains plug for your safety and convenience A 10 amp fuse is fitted in this plug Shall the fuse need to be replaced please ensure that the replacement fuse has a rating of 10 amps and that it is
69. r A POS ISIZE i depending on the input signal T Press to exit from adjust mode and the display mode Note If a Cue or Rew signal from a VCR or DVD player is received the picture position will shift up or down This picture position movement cannot be controlled by the Pos Size function AUTO H Pos V Pos H Size V Size Dot Clock and Clock Phase are automatically adjusted when the PC signal SETUP is received This setting only operates when a PC signal is input and the aspect is 16 9 Using Remote Control AUTO When on the remote control is pressed Auto Setup will be executed POWER od When Auto Setup does not work Invalid is displayed POS SIZE PICTURE SOUND SETUP gt Notes e Auto Setup may not work when a cropped or dark image is input In such case switch to a bright image with borders and other objects are clearly shown and then try auto setup again Depending on the signal out of alignment may occur after Auto Setup Carry out fine tuning for the position size as required If Auto Setup cannot set properly for vertical frequency 60Hz XGA signal 1024x768 60Hz and 1366x768 60Hz pre selecting the individual signal in XGA MODE see page 39 may results in correct Auto Setup Auto Setup does not work well when a signal such as additional information is superimposed out of valid image period or intervals between synchronizing and image signals are short If Aut
70. r volume level is changed Press the R button to return to previous menu screen N button see page 23 24 25 26 RECALL button Press the RECALL button to POSITION buttons display the current system status Input label Aspect mode see page 19 P Off timer Panasonic The off timer indicator is INPUT button Press to select input signal sequentially see page 16 DISPLAY displayed only when the off ECO MODE ECO timer has been set Press to change the ECO MODE Clock display see page 44 setup status see page 32 ET 8 FUNCTION buttons FUNCTION see page 45 Off timer_ 90min Digital Zoom see page 20 18 ASPECT Controls The Display will allow you to enjoy viewing the picture at its maximum size including wide screen cinema format picture Note Be aware that if you put the display in a public place for commercial purposes or a public showing and then use the aspect mode select function to shrink or expand the picture you may be violating RW sxc ee the copyright under copyright law It is prohibited to show or alter the copyrighted materials of other 9 JL people for commercial purposes without the prior permission of the copyright holder DANa ASPECT amp T Press repeatedly to move through the aspect options Bii gt Zoom1 gt Zoom2 gt 16 9 from the unit E gt a 44 The aspect mode chang
71. ransmitter e instructions N2QAYB000691 R6 UM3 Size x 2 Panasonic Co LLNS E Power supply cord TH 42LFE7U TH 50LFE7U TH 65LFE7U Attention Store small parts in an appropriate manner and keep them away from young children Remote Control Batteries Requires two R6 batteries 1 Pull and hold the hook then open 2 Insert batteries note correct 3 Replace the cover the battery cover polarity and For frequent remote control users replace old batteries with Alkaline batteries for longer life Z Precaution on battery use Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter Disposal of batteries should be in an environment friendly manner Observe the following precaution Batteries shall always be replaced as a pair Always use new batteries when replacing the old set Do not combine a used battery with a new one Do not mix battery types example Zinc Carbon with Alkaline Do not attempt to charge short circuit disassemble heat or burn used batteries Battery replacement is necessary when remote control acts sporadically or stops operating the Display set Do not burn or breakup batteries Batteries must not be exposed to excessive heat such as sunshine fire or the like OoaRhWN Connections AC cord connection
72. re shown The screen will darken slightly when photos still images of a computer or other pictures with minimal movements are shown for an extended period This is done to reduce image retention on the screen and the shortening of the screen s service life It is normal and not indicative of malfunctioning It takes a while for the picture to appear The unit digitally processes the various signals in order to reproduce esthetically pleasing images As such it sometimes takes a few moments for the picture to appear when the power has been turned on when the input has been switched The edges of the images flicker Due to the characteristics of the system used to drive the panel the edges may appear to flicker in the fast moving parts of the images This is normal and not indicative of malfunctioning There may be red spots blue spots green spots and black spots on the screen This is a characteristic of liquid crystal panels and is not a problem The liquid crystal panel is built with very high precision technology giving you fine picture details Occasionally a few non active pixels may appear on the screen as fixed points of red blue green or black Please note this does not affect the performance of your LCD Image retention appears Image retention may occur If you display a still picture for an extended period the image might remain on the screen However it will disappear after a while T
73. s B four times Press g four times Press D ENTER E a INPUT ENTER MENU amp ENTER Press g four times Press four times Press p four times Press B Y ENTER Ha ENTER On Press J four times Press 0 four times Press f four times gt Press B Off lt gt User1 lt gt User2 lt gt User3 Off You can use all of the buttons on the remote control Remocon User level User1 You can only use G O eh BA buttons on the remote control POWER User2 You can only use button on the remote control User3 Locks all the buttons on remote control 5V Charge Sets the power supply from the CHARGE terminal CHARGE terminal On Supplies power when the power of the display is on power supply Off Supplies no power setting Note Power will not be supplied in standby mode even if 5V Charge is set to On Enable Enables the Off timer function Off timer function Disable Disables the Off timer function Note When Disable is set the Off timer is cancelled Normal lt gt On lt gt Standby Sets the power mode of the unit for when the power recovers from failure or after plugging off and in again Normal Power returns in as the same state as before the power interruption Standby Power returns in standby mode Power Indicator red orange On Power returns in power On Power Indicator green Note When using multiple displays Standby is preferred to be set in
74. s holes or drop them onto the Display as doing so can cause fire or electric shock Do not remove the cover or modify it in any way e High voltages which can cause severe electric shocks are present inside the Display For any inspection adjustment and repair work please contact your local Panasonic dealer Ensure that the mains plug is easily accessible Do not use any power supply cord other than that provided with this unit e Doing so may cause fire or electric shocks Securely insert the power supply plug as far as it will go e If the plug is not fully inserted heat may be generated which could cause fire If the plug is damaged or the wall socket is loose they shall not be used Do not handle the power supply plug with wet hands e Doing so may cause electric shocks Do not do anything that may damage the power cable When disconnecting the power cable pull on the plug body not the cable e Do not damage the cable make any modifications to it place heavy objects on top of it heat it place it near any hot objects twist it bend it excessively or pull it To do so may cause fire and electric shock If the power cable is damaged have it repaired at your local Panasonic dealer Do not remove covers and NEVER modify the Display yourself e Do not remove the rear cover as live parts are accessible when it is removed There are no user serviceable parts inside High voltage components may cause serious electrical shock e Have
75. s in the installation environment for the pedestal or wall hanging bracket even during the warranty period Always be sure to ask a qualified technician to carry out set up Small parts can present choking hazard if accidentally swallowed Keep small parts away from young children Discard unneeded small parts and other objects including packaging materials and plastic bags sheets to prevent them from being played with by young children creating the potential risk of suffocation Do not place the Display on sloped or unstable surfaces and ensure that the Display does not hang over the edge of the base e The Display may fall off or tip over Do not place any objects on top of the Display e If water is spills onto the Display or foreign objects get inside it a short circuit may occur which could result in fire or electric shock If any foreign objects get inside the Display please consult your local Panasonic dealer Transport only in upright position e Transporting the unit with its display panel facing upright or downward may cause damage to the internal circuitry Ventilation should not be impeded by covering the ventilation openings with items such as newspapers table cloths and curtains For sufficient ventilation Leave a space of 3 15 16 10 cm or more at the top left and right and 1 31 32 5 cm or more at the rear and also keep the space between the bottom of the display and the floor surface Cautions for Wall Ins
76. sections are adjusted both horizontally and vertically 0 100 To show joints between displays To hide joints between displays Bezel H Adjustment Bezel V Adjustment ss we Exar mpley _ Suitable for still image display Suitable for moving image display Setting value 0 Setting value 100 35 Setup for MULTI DISPLAY Select the required arrangement number A1 E5 Refer to the following Display Number locations for each arrangement Examples 2x1 2x3 4x2 4x4 Location M Ae AS B3 _ Press to exit from adjust mode ID Remote Control Function You can set the remote control ID when you want to use this remote control on one of several different displays Note To operate this function please purchase ID remote controller sold separately Object model EUR7636090R Europe EUR7636070R Other countries Switch gi to on the right side Press the button on the remote control Press one of C9 0 for the tens digit setting mh OKND Press one of C9 0 for the units digit setting Notes The numbers in 2 3 and 4 should be set up quickly e Adjustable ID number range is 0 99 e Ifa number button is pressed more than two times the first two numbers become the ID number for the remote control ID remote control button operation A The operation is the same as norma
77. select the Signal YUV RGB in select RGB No activity power off Disable English UK Press ACTION m button Press to display the Signal menu Press to select the menu to adjust For RGB Press to adjust the menu Signal RGB Off 1024x768 H Freq 63 98 kHz V Freq 60 02 Hz 4 SET UP Signal Format 1280 1024 60 7 Press to exit from adjust mode For Digital Signal Digital Cinema reality HDMI Range Auto H Freq 63 98 kHz V Freq 60 02 Hz Dot Clock Freq 108 0 MHz Signal Format 1280x1024 60 Cinema reality Cinema reality When on the display attempts to reproduce a more natural interpretation of sources such as movie pictures which are recorded at 24 frames per second If the picture is not stable turn the setting to off Press to select Cinema reality Cinema reality ion Press to set On Off 38 Setup for Input Signals XGA Mode This menu is displayed when the input signal is analog This menu sets two types of XGA signals with 60Hz vertical frequency having different aspect ratios and sampling rates 1 024 x 768 60Hz and 1 366 x 768 60HZ When a 1 280 x 768 60Hz input signal is automatically detected the image is processed as a 1 280 x 768 60Hz XGA input signal irrespective of this setting XGA Mode 4 1024 x 68_ Press to select XGA Mode Press to select 1024x768 1366x768 Note After making this sett
78. sing Web Browser Control 1 Display name Displays the name of the Display 2 Mac Address Displays the MAC address 3 Resolution Displays the resolution of the Display 4 Power Status Displays the status of the power 5 Source Displays the selected video input 6 Exit Return the operation page 1 Help Desk Sends or receive messages to the administrator who uses Crestron Connected 53 Troubleshooting Before you call for service determine the symptoms and make a few simple checks as shown below Symptoms Picture Sound Checks A Interference Noisy Sound Electrical Appliances Cars Motorcycles Fluorescent light Normal Picture Fh No Sound Volume Check whether the mute function has been activated on the remote control ra No Picture 3 No Sound S Not plugged into AC outlet Not switched on PICTURE and BRIGHTNESS Volume setting Check by pressing the power switch or stand by button on the remote control 4 No Picture Pp Normal Sound If a signal with a non applicable format or frequency is input only the input terminal indication is displayed No remote control operations can be performed Check whether the batteries have discharged completely and if they have not whether they were inserted properly Check whether the remote control sensor is exposed to an outdoor light or a strong fluorescent light Check whether the
79. sk for the correct method of disposal Note for the battery symbol bottom two symbol examples This symbol might be used in combination with a chemical symbol In this case it complies with the requirement set by the Directive for the chemical involved pd pd Fa USA only Disposal may be regulated in your community due to environmental considerations For disposal or recycling information please visit Panasonic website http www panasonic com environmental or call 1 888 769 0149 Customer s Record The model number and serial number of this product can be found on its rear panel You should note this serial number in the space provided below and retain this book plus your purchase receipt as a permanent record of your purchase to aid in identification in the event of theft or loss and for Warranty Service purposes Model Number Serial Number For TH 42LFE7U TH 50LFE7U TH 65LFE7U Panasonic System Communications Company of North America Unit of Panasonic Corporation of North America Executive Office Two Riverfront Plaza Newark New Jersey 07102 5490 Panasonic Canada Inc 5770 Ambler Drive Mississauga Ontario LAW 2T3 Panasonic Corporation Web Site http panasonic net Panasonic Corporation 2014
80. splay the Setup menu Menu Display Duration KHEM Menu Transparenc EN Press to select Menu Display Duration 2 Press to adjust the display duration Press to select Menu Transparency Sot Press to adjust the transparency a By 4 SET UP 7 Press to exit from adjust mode 34 Setup for MULTI DISPLAY By lining up the Displays in groups for example as illustrated below an enlarged picture may be displayed across all screens For this mode of operation each display has to be set up with a Display number to determine its location Example group of 4 2 x 2 group of 9 3 x 3 group of 16 4 x 4 group of 25 5 x 5 How to Setup MULTI DISPLAY 14 Press to display the Setup menu MULTI DISPLAY Setup Press to select the MULTI DISPLAY Setup Set up TIMER PRESENT TIME Setup Network Setup Menu Display Duration 5S Menu Transparenc Po Press to display the MULTI DISPLAY Setup menu Press to select the MULTI DISPLAY Setup MULTI DISPLAY Setup MULTI DISPLAY Setup Horizontal Scale Vertical Scale 1 Bezel H Adjustment GO Bezel V Adjustment ON Location Al D Press to select On or Off MULTI DISPLAY Setup Select On or Off Horizontal Scale Select 1 2 3 4 5 Vertical Scale Select 1 2 3 4 5 Areas of the image that are hidden by the joint
81. splay the menu screen 2 Select the item O Picture ENTER Noasa Normal m H Press Picture Mode eai Fy Ale _ Ennes m Example va Select i wee Ee mm Picture menu Normal Adjust 3 Set l Press O Adjust 4 Exit the menu POS SIZE PICTURE SOUND SETUP i i W 2 VoL Press R MENU Der Press O to return to the previous menu Press several times Menu display list Note Menu that cannot be adjusted is grayout Adjustable menu changes depending on signal input and menu setting Picture menu Setup menu Pos Size menu Sound menu d Sound Pos Size O Picture D Normalise Normal Normalise Normal Normalise Normal Picture Mode Backlight 7001 Contrast 70 1 50 a __ i Normal gt 4 FRAME CREATION _ CEE see page 24 25 Input label ECO Mode settings Wobbling Off D YUV RGB in select No activity power off OSD Language English UK see page 27 42 H Pos 0 Ea H Size 0 Sa Clock Phase Dot Clock 0 D 1 1 Pixel Mode l Off D see page 22 23 Bass ll E Surround C see page 26 21 Adjusting Pos Size Press to display the Pos Size menu 2 Press to select the menu to adjust Pos Size gt Normalise Normal E CS a E E Press to adjust the menu 1 1 Pixel Mode Note Unadjustable items are grayed out Adjustable items diffe
82. tallation e Wall installation should be performed by an installation professional Installing the Display incorrectly may lead to an accident that results in death or serious injury Furthermore when installing on a wall a wall hanging bracket that conforms to VESA standards TH 42LFE7U E ER VESA 200x200 TH 50LFE7U E VESA 400x200 TH 65LFE7U E VESA 400x400 must be used If you terminate the use of the Display on the wall ask a professional to remove the Display as soon as possible e When mounting the Display on the wall prevent the mounting screws and power cable from contacting metal objects inside the wall An electric shock may occur if they contact metal objects inside the wall When installing the Display vertically be sure to install the power indicator onto the top of the Display Do not install the product to a place where the product is exposed to direct sunlight e If the screen is exposed to direct sunlight the liquid crystal panel may have adverse effect During installation impacts and the like may damage the Display Please handle with care Safety Precautions E When using the LCD Display The Display is designed to operate on 110 127 or 220 240 V AC 50 60 Hz Do not cover the ventilation holes e Doing so may cause the Display to overheat which can cause fire or damage to the Display Do not stick any foreign objects into the Display e Do not insert any metal or flammable objects into the ventilation
83. the Shielded Twist Pair STP LAN l 2 o cable fener i oro 4 Hub or broadband router Notes e Make sure the broadband router or hub supports 10BASE T 100BASE TX e Use a LAN cable that is compliant with CAT5 when connecting a device that supports 100BASE TX e For instructions on how to connect consult your network administrator 47 Using Network Function Command Control Network function of the unit can control the unit in the same way as serial control from a network Supported commands Commands used in the serial control are supported see page 12 Note Consult your local Panasonic dealer for detail instructions on command usage PJLink Protocol The network function of the unit conforms with PJLink class 1 and you can operate the following actions from your computer using PJLink protocol e Display setup e Display status query Supported commands Commands to control the unit with PJLink protocol are shown in the table below Control Remark Parameter 0 Standby 1 Power On Parameter 0 Standby 1 Power On Power control Power status query Input switch Parameter Input switch query See the
84. wing 5 patterns are displayed full screen for 5 seconds each Black Dark Gray Gray Light Gray White 1 SETUP Press to display the Setup menu Press to select Screensaver YUV RGB in select E774 Press to display Screensaver screen n eem No activity power off OSD Language Screensaver PRESENT TIME MON 0 02 Mode 3 Mode selection selection Off Press to select Mode Mam ly Press to select each Interval Operates when Periodic Time and Operating E mode items Time are setup and those times arrive Time Designation Operates when Start Time and Finish Time are setup and those times arrive Standby after SCR Saver Operates while Screensaver duration and display enters standby mode On Operates when Start is selected and the ACTION button is pressed 4 Start setting When the Mode is set to On press to select Start Press to start Screensaver The menu screen will disappear and the Screensaver will be activated To stop the Screensaver under On press the R button or any buttons on the main unit Note When the display is turned off the Scrensaver will be deactivated 29 Screensaver For preventing image retention Setup of Screensaver Time After selecting Time Designation Interval or Standby after SCR Saver the relevant Time Setup will become available for selection and the Operating Time may be set Time cannot be set when Mode is On

Epson 9600 Printer User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents