Epson 486SX Personal Computer User Manual
Contents
1. into place 6 Place the handset in the base to charge Extra Charging Cradle 1 Plug the AC power adaptor of the extra charging cradle into the electrical outlet NOTE This power adaptor is intended to be correctly orientated in a vertical or floor mount position 2 Place the handset in the extra charging cradle The charge indicator turns on verifying the battery is charging 3 Allow the phone to charge for 16 hours prior to first use Handset Registration YOU MUST REGISTER THE HANDSET TO THE MAIN BASE BEFORE USE After the optional handset has charged for 16 hours on the extra charger place it on the main base station for 20 seconds it will then automatically register NOTE PLEASE REGISTER shows on the display if the handset has not been registered Once a handset has completed registration successfully READY will show on the handset s display NOTE In case of a power failure the handsets may display UNAVAILABLE when the TALK CALL BACK button is pressed You must then place all handsets on the main base cradle for 20 seconds to re register Battery Safety Precautions e Do not burn disassemble mutilate or puncture Like other batteries of this type toxic materials could be released which can cause Injury e To reduce the risk of fire or personal injury use only the Nickel Cadmium Ni Cd or Nickel Metal Hydride Ni MH battery listed in the User s Guide e Keep batteries out of the reach of children2. unit you may find a detailed description of its functions in the User s Guide provided with your original purchased unit If you have purchased an extra handset that is not of the same type as your original handset you may still use the original User s Guide to help explain the new handsets basic functions and options NOTE The 25902 accessory handset is equipped with only basic features and does not have any handset remote answering features even when it is registered to Model 25952 or 25982 Parts Checklist Make sure your package includes the items shown here a Handset Belt battery pack clip Charge Cradle gaaagmHe Naat Tt Battery compartment cover Installing the Handset Battery NOTE You must connect the handset battery before use CAUTION To reduce the risk of fire or personal injury use only the Thomson Inc approved Nickel Cadmium Ni Cd battery model 5 2729 or Nickel Metal Hydride Ni MH model 5 2522 which is compatible with this unit 1 Locate battery and battery door which are packaged together inside a plastic bag and are separate from the handset 2 Locate the battery compartment on the back of the handset 3 Plug the battery pack cord into the jack inside the compartment NOTE To ensure proper battery installation the connector is keyed and can be inserted only one way 4 Insert the battery pack 5 Close the battery compartment by pushing the door up until it snaps
3. 007 Thomson Inc images amp beyond Trademark s Registered Printed in China Marcals Registradals antenna for radio or television that is receiving the interference eReorient or relocate and increase the separation between the telecommunications equipment and receiving antenna eConnect the telecommunications equipment into an outlet on a circuit different from that to which the receiving antenna is connected If these measures do not eliminate the interference please consult your dealer or an experienced radio television technician for additional suggestions Also the Federal Communications Commission has prepared a helpful booklet How To Identify and Resolve Radio TV Interference Problems This booklet is available from the U S Government Printing Office Washington D C 20402 Please specify stock number 004 000 00345 4 when ordering copies Notice The changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment Hearing Aid Compatibility HAC This telephone system meets FCC standards for Hearing Aid Compatibility FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body This transmitter must not be co locat
4. Quick Set Up Guide for Optional Additional Model 25902 Cordless Handset for use with Systems 25932 25952 and 25982 Series Interference Information This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation Privacy of Communications may not be ensured when using this product If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures eReorient or relocate the receiving antenna that is the Thomson Inc 10330 North Meridian Street ener a 0 Dom E Indianapolis IN 46290 07 13 THOMSON 2
5. e Remove batteries if storing over 30 days NOTE The RBRC seal on the battery used in your Thomson Inc product indicates that we are participating in a program to collect and recycle the rechargeable battery or batteries For more information go to the RBRC web site at www rbrc org or call 1 800 8 BATTERY or contact a local recycling center Service If trouble is experienced with this equipment for repair or warranty information please contact customer service at 1 800 448 0329 If the equipment is causing harm to the telephone network the telephone company may request that you disconnect the equipment until the problem is resolved This product may be serviced only by the manufacturer or its authorized service agents Changes or modifications not expressly approved by Thomson Inc could void the user s authority to operate this product For instructions on how to obtain service refer to the warranty included in this guide or call customer service at 1 800 448 0329 Or refer inquiries to Thomson Inc Manager Consumer Relations P O Box 1976 Indianapolis IN 46206 Attach your sales receipt to the booklet for future reference or jot down the date this product was purchased or received as a gift This information will be valuable if service should be required during the warranty period Purchase date Name of store
6. ed or operated in conjunction with any other antenna or transmitter For body worn operation this phone has been tested and meets the FCC RF exposure guidelines when used with the belt clip supplied with this product Use of other accessories may not ensure compliance with FCC RF exposure guidelines CAUTION ur a OF ELECTRIC SHOCK PISK NOT OPEN NOT OPEN oe A ae THE EXCLAMATION CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT Hatten COVER OR WARNING TO ie PREVENT FIRE OR ANGLE IS A BACK NO USER ELECTRICAL SHOCK WARNING SIGN SERVICEABLE PARTS INSIDE HAZARD DO NOT 4 am SERVICE EXPOSE THIS icky PRODUCT TO RAIN OR MOISTURE INSTRUCTIONS ACCOMPANYING THE PRODUCT SEE MARKING ON BOTTOM BACK OF PRODUCT Introduction CAUTION When using telephone equipment there are basic safety instructions that should always be followed Refer to the IMPORTANT SAFETY INSTRUCTIONS provided with this product and save them for future reference IMPORTANT Because cordless phones operate on electricity you should have at least one phone in your home that isn t cordless in case the power in your home goes out You can only use one handset at a time and there is NO conference and intercom features for these units If the TALK CALL BACK or SPEAKER button is pressed on one handset while another handset is in use UNAVAILABLE shows on the display If you have purchased an extra handset apart from your original purchased
Download Pdf Manuals
Related Search