Eos Wireless Digital Wireless Multi-Room Audio System Speaker System User Manual
Contents
1. The LED indicators on the Base Station labeled as digital wireless speakers indicate the number of Wireless Speakers Receivers linked to your Base Station Linking Wireless Speakers Receivers to a Specific Base Station Due to the incredible range of the Eos system it is possible for your speakers to receive audio from a neighbors system If this happens or if you wish to run more than one Eos Wireless System in you house you can give your Base Station Speakers Receivers a unique ID In giving your system a unique ID your Speakers Receivers will link only to the base that they are paired to Using Your Eos System Setting a Unique ID To give your Base Station and Speakers Receivers a Unique ID do the following 1 2 Disconnect the power supply from the Base Station Using the Volume Control Switch turn off all power to the Wireless Speakers Re ceivers that you wish to link Reconnect the power supply to the Base Station Press and hold the LINK button on the rear of the Base Station for 3 seconds until all four Wireless Speaker Link LEDs on the Base Station start blinking and then release button Note all four Wireless Speaker Link LEDs on the Base Station will blink while in Link Mode Turn on the Wireless Speakers Receivers that you wish to link to this Base Station within 60 seconds2. 30GB Universal Dock 6 4GB to 6GB Universal Dock 3 20GB to 40GB Universal Dock 2 40GB Universal Dock 5 40GB amp 60GB Universal Dock 7 Not included in package Call 877 465 3927 for 3rd generation iPod dock adapter Playing your iPod 1 Place your iPod into the dock 2 Press the play button on the iPod or the Remote Control Note iPod navigation controls are fully functional while in the dock Note iPod volume jog wheel changes the headphone volume only and has no effect on the Eos Base Station volume Charging your iPod e When your iPod is in the dock and power is connected to the Base Station your iPod will automatically charge The charge indicator on your iPod will let you know when charging is complete Using Your Eos System Connecting an External Audio Source The Eos Wireless Audio System allows you to connect and play audio from an external source like acomputer MP3 player radio CD player or other audio device with a head phone jack or analog audio output Audio Source Connect provided cable to head Connect other end of the cable to phone jack of external device the jack on the back of the Base Sta tion marked AUX Press the SOURCE button to switch to the auxiliary input The AUX LED indicator on the front of the Base Station will illuminate Note A stereo mini cable has been provided for connecting to the headphone jack of
3. gt COS wireless OWNER S MANUAL Thank You For Choosing Eos Wireless We hope you will find much enjoyment from our new wireless audio system Please read the entire contents of this owner s manual It is filled with reference information that will allow you to get the most from your new Eos system If you have any questions please check our web site at www eoswireless com productsupport or call us at 877 465 3927 Your Total Satisfaction Eos Job 1 Congratulations on your purchase of the Eos Digital Wireless Multi Room Audio System We are committed to making sure your experience is problem free If you experience any difficulty and or have any questions regarding the Eos system that are not addressed in this manual please feel free to contact the Eos Technical Support Team toll free at 877 465 3927 between the hours of 8 30AM and 5PM pacific time Our Eos Support Team aims to offer quick comprehensive and thorough technical support to all our users Before you call please make sure you have your Eos unit model number and serial number on hand These numbers can be found on the label located on the bot tom of the unit TEN COS wireless 877 465 3927 www eoswireless com Table Of Contents Important Safety InStrucHONS sesse sd a a oe ss 4 A Consumer Guide to Product Safety urn en sees sek ees eek Dee Eks
4. Wireless Speaker Link LEDs on the Base Station will blink while in Reset Mode 5 Disconnect the power supply from the Base Station Using the Volume Control Switch turn off all power to the Wireless Speakers Receivers While pressing and holding the LINK button on the rear of the Base Station reconnect the power supply from the Base Station Hold the link button for about 3 seconds Release LINK button n Turn on the Wireless Speakers Receivers within 60 seconds of releasing the LINK button Note Allow each Wireless Speaker Receiver to Link before turning on the next Wireless Speaker Receiver After completing steps 1 5 speakers will be set to the factory default ID and will be able to link with your Base Station or any other Base Station with the factory default ID in the vicinity Range Extender The Range Extender Switch located on the back of the Base Station allows you to increase the effective range of the Eos Wireless System Use this button only if you are having difficulty linking up your Wireless Speakers Receivers About Range Extender To maintain a solid interference free link the Eos system incorporates an advanced proprietary error correction scheme Error correction is done by creating a slight delay between Ola B the transmitter and Wireless Speaker Using this delay Eos can confirm that the audio packets arrive at the Wireless Speaker receiver If the audio packet is not
5. an exter nal audio device If connecting to a home stereo a stereo mini to RCA cable is required mini to RCA cable is not included Using Your Eos System Muting the Base Station Speakers The MUTE button located on the Eos Base Station allows you to mute the Base Station speakers When the speaker to the base unit is muted the blue LED source indicator light iPod or Aux will flash iPod Turning the wireless transmitter On Off The wireless transmitter button located in the center of the Base Station allows you to turn OFF transmission to all Wireless Speakers Receivers When the transmitter is ON the LED on the antenna is illuminated When the transmitter is turned OFF the antenna LED is off and all Wire less Speaker link LEDs will be off Pressing the wireless transmitter button again will reestab lish transmission with all Wireless Soeakers Receivers reless speakers B igit o Base Stataion Antenna LED status 1 Solid Base Station Transmitter is on 2 Off Base Station Transmitter is off 3 Blinking link mode Using Your Eos System Wireless Speakers Receivers All Eos Base Stations Wireless Speakers and Receivers have the same ID setting This is done so Speakers Receivers will automatically link with any Base Station The Base Station will link with the first 4 Wireless Speakers that it detects digital wireless speakers
6. of pressing the LINK button Note to link additional speakers once a unique ID has been set refer to the Adding a Speaker to a System with a Unique ID section below Adding a Speaker to a System with a Unique ID Once a unique ID is set on your Base Station you will need to do the following to link ad ditional speakers to your Base Station Please note this procedure is only necessary if you have set a unique ID for your Base Station 1 2 Disconnect the power supply from the Base Station Using the Volume Control Switch turn power to the Wireless Speakers Receivers that you wish to link 3 Reconnect the power supply from the Base Station Press and hold the LINK button on the rear of the Base Station for 8 seconds until only the first Wireless Speaker Link LED on the Base Station starts blinking and then release button Note When Link button is pressed and held the Wireless Speaker Link LEDs on the Base Station will blink slowly for a few seconds and then go to a fast blink fast blinking indicates the Base Station is in Add a Speaker Mode Turn on the Wireless Speaker Receivers that you wish to link to this Base Station one at a time within 60 seconds of pressing the LINK button Using Your Eos System Resetting the ID to Default To reset the Base Station and Speaker Receiver s ID back to the factory default do the following 1 2 3 4 Note all four
7. out lined in the owner s manual e Damage to iPod Warranty THIS WARRANTY IS NON TRANSFERABLE AND APPLIES ONLY TO THE ORIGINAL PURCHASER AND DOES NOT EXTEND TO SUBSEQUENT OWNERS OF THE PRODUCT ANY APPLICABLE IMPLIED WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY ARE LIMITED IN DURATION TO A PERIOD OF THE EXPRESS WARRANTY AS PROVIDED HEREIN BEGINNING WITH THE DATE OF ORIGINAL PURCHASE AT RETAIL AND NO WARRANTIES WHETHER EXPRESS OR IMPLIED SHALL APPLY TO THIS PRODUCT THEREAFTER INTELLITOUCH MAKES NO WARRANTY AS TO THE FITNESS OF THE PRODUCT FOR ANY PARTICULAR PURPOSE OR USE UNDER NO CIRCUMSTANCES SHALL INTELLITOUCH BE LIABLE FOR ANY LOSS DIRECT INDIRECT INCIDENTAL SPECIAL OR CONSEQUENTIAL DAMAGE ARISING OUT OF OR IN CONNECTION WITH THE USE OF THIS PRODUCT THIS WARRANTY IS VALID ONLY IN THE UNITED STATES OF AMERICA AND CANADA THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS HOWEVER YOU MAY HAVE OTHER RIGHTS THAT MAY VARY FROM STATE TO STATE SOME STATES DO NOT ALLOW LIMITATION ON IMPLIED WARRANTIES OR EXCLUSION OF CONSEQUENTIAL DAMAGE THEREFORE THESE RESTRICTIONS MAY NOT APPLY TO YOU Patents pending Eos Wireless is a registered trademark of IntelliTouch iPod is a registered trademark of Apple Inc C is a trademark of SRS Labs Inc WOW technology is incorporated under license from SRS Labs Inc
8. suited toward a variety of musical tastes and music styles To find the EQ setting control on your iPod go to the main Menu and select Settings and scroll down to EQ Experiment with the different EQ settings until you find the setting that suits your taste best Acoustic Bass Booster Bass Reducer Classical Dance About SRS WOW SRS WOW improves the dynamic audio performance of compressed and uncompressed audio by expanding the size of the audio image and creating a deep rich bass response Bigger wider sound field for an immersive 3D audio experience e Restored audio dynamics for sound closest to what the artist intended e Deep rich bass performance for maximum response and thump SRS WOW Troubleshooting Symptom Possible Problem Solution Base Station EE Unit does not respond no AC adapter is not plugged Make sure that the AC adapter power into wall outlet or the is securely connected into connector in the back of a wall outlet Unplug and the Base Station is not re plug the connector to the connected properly power jack on back of the Base Station marked DC 15V iPod does not dock Wrong dock adapter used See chart to select the proper properly docking adapter for your iPod on page 12 No sound Base Station speaker Press MUTE button iPod or muted iPod or Aux LED Aux LED indicator will stop indicator is blinking blinking Volume level set too low Increase volume level
9. Ds Indicates the input source iPod or AUX LEDs flash when MUTE function is active Wireless Transmit Activates the Base Station transmitter Controls and Functions Wireless Stereo Speaker Controls amp Functions Integrated Power Adapter Allows wireless speaker to mount to wall jack or remove for table or countertop placement y Antenna Power Status LED Illuminates when the wireless speaker is linked to the base station blinks when the there is no link to the base station Volume Power Knob Turns on power to the wireless speaker and controls volume Using Your Eos System Base Station Operation Using Eos with your iPod Selecting the correct universal iPod docking adapter Universal adapters provide support for your iPod while in the dock An assortment of adapters has been provided for older generation iPods Note Universal Dock adapters for newer model iPods Nano and 5th Generation Video iPods were included with the original packaging of these iPods Using the chart below locate the proper docking adapter for your iPod and insert it in the recessed area and snap into place iPod Photo iPod Mini color screen 4th Generation iPod click wheel 3rd Generation iPod 4 horizontal buttons 10GB to 20GB Universal Dock 1 20GB amp 30GB Universal Dock 4 20GB amp
10. aker w Integrated Power Adapter IR Remote Control Five Universal Docking Adapters Stereo Mini Cable OWNERS manva Setting Up Your Eos System orr ENON C AUX RANGE EX LINK D 1 Connect the power adapter cord to the Base Station jack marked DC15V 6 Turn the volume knob clock wise to apply power to the Wireless Speaker Ouick Start 2 Connect the power supply to the wall outlet 5 Plug your Wireless Speaker into any wall outlet RE 7 Press the play button on your iPod or the IR remote Controls and Functions Base Station Controls amp Functions Range Link Extender Used to link wireless Extends the speakers receivers transmission range a DC Power to a specific base station of the Eos system Auxillary Input Jack Allows input from Provides power to the base station external audio source EI Antena LED Illuminates when the transmitter is active iPod Dock Allows playback amp charging from any iPod with a dock connector 0 Volume Control Controls the volume level Wireless Speaker Indicator LEDs Indicates the number of wireless speaker receivers which are linked to the base Mute Mutes the audio on the base station oo Source Switches between iPod amp auxiliary input Source LE
11. akers Receivers linked to your Base Station Note Due to the incredible range of the Eos system it is possible for your speakers to receive audio from a neighbor s system If this happens or if you wish to run more than one Eos system in your house you can give your Base Station Speakers Receivers a unique ID With a unique ID set your Speakers Receivers will link only to the Base Station that they are paired to To set a unique ID for your Eos Wireless system please see the section titled Linking Wire less Speakers Receivers to a Specific Base Station Antenna LED Indicator The Antenna on the Wireless Speaker is equipped with a blue LED that tells the status of the Wireless Speaker Solid LED power on linked with Base Station Blinking LED power on not linked with Base Station e LED off Wireless Speaker power off Note If the Antenna LED is blinking on the Wireless Speaker make sure that the transmitter is activated on the Eos Base Station blue LED on the Antenna of the Base Station and or the Wireless Speaker is not out of range of the Base Station Using Your Eos System Customizing Eos Sound for You Your personal taste in sound style of music volume levels and other factors in your choice of music will affect the sound of Eos To custom craft Eos sound for your personal taste we suggest using the EQ control located on your iPod These easy to use settings offer preset equalizations that are
12. ctric shock avoid overloading wall outlets extension cords or integral convenience receptacles A Consumer Guide to Product Safety 15 Do not let objects or liquids enter the product as they may touch dangerous volt age points or short out parts that could result in a fire or electric shock 16 Use proper power sources Plug the product into a proper power source as de scribed in the operating instructions or as marked on the product FCC Information Information about products that generate electrical noise if applicable this equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 ofthe FCC rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not in stalled and used in accordance with the instructions may cause harmful interference to radio communications However this is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or televi sion reception which can be determined by turning the equipment off and on you are encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment
13. ded to be used only with the power supply provided Using another power supply can cause damage to the unit and or the iPod This product must be used indoors It is neither designed nor tested for use outdoors in recreation vehicles or on boats WARNING Keep the Remote Control battery away from children It may cause a fire or chemical burn if mishandled Do not recharge disassemble heat above 100 C 212 F or incinerate Dispose of used batteries properly Replace only with a battery of the correct type and model number WARNING Danger of explosion if the remote control battery is incorrectly replaced Re place only with CR2032 or DL2032 3 volt lithium batteries Please dispose of used batteries properly following any local regulations Do not incinerate A Consumer Guide to Product Safety Safety Instructions 1 2 3 4 5 13 14 Read instructions before using this product Keep these instructions for future reference Heed all warnings on the product and in the owner s guide Follow all instructions Do not use this apparatus near water or moisture Do not use this product near a bathtub washbowl kitchen sink laundry tub in a wet basement near a swimming pool or anywhere else that water or moisture are present Clean only with a dry cloth and as directed by IntelliTouch Corporation Unplug this product from the wall outlet before cleaning Do not block any ventilation openings around the subwoofer
14. ess Speaker on a desktop bookshelf remove the power supply from the wireless speaker by following these steps 1 Press down on the top of the power supply The swivel plate beneath the power supply will make a click sound and rotate outward 2 Rotate adapter forward and remove the power supply from the enclosure Using Your Eos System Reattaching the Power Supply to the Wireless Speaker 1 9 Mi fw ON Coil the cord around your hand Place the coil of cord in the bottom of the cavity Press lower edge of swivel plate to rotate forward Insert the power supply into the cavity leaning forward Press down on the top of the power supply Rotate the power supply back to a vertical position making sure to lock the tab at the top of the speaker cabinet with the groove at the top of the power supply Using Your Eos System Adding Additional Wireless Speakers Receivers You can link up to 4 Wireless Speakers placed up to 150 ft away from the Base Station All Eos Base Stations Wireless Speakers Receivers leave the factory with the same ID setting This is done so Speakers Receivers will link with any Base Station right out of the box A new Wire less Speaker will automatically link with your Base Station as soon as itisturned on The Base Station features 4 individual Wireless Speaker link LEDs marked 1 to 4 The LEDs will illuminate indicating the number of Wireless Spe
15. grill Install in ac cordance with the manufacturer s instructions To ensure reliable operation of the product and to protect it from over heating put the product in a position and loca tion that will not interfere with its proper ventilation For example do not place the product on a bed sofa or similar surface that may block the ventilation openings Do not put it in a built in system such as a bookcase or a cabinet that may keep air from flowing through its ventilation openings Avoid prolonged exposure to direct sunlight or heat Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Only use attachments accessories specified by the manufacturer Unplug this apparatus during lightning storms or when unused for long periods of time to prevent damage to this product Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped Do not attempt to service this product yourself Opening or removing covers may expose you to dangerous voltages or other haz ards Please call IntelliTouch to be referred to an authorized service center near you To prevent risk of fire or ele
16. ke 5 Safety WAS LUC EI ONS ae 5 FCC Informationen ee nen 6 EE AIS ARE N N EE 7 Technical INiormalion aan een 7 EnMironmentalne lirements ns EE Ge 7 Quick ea AE Or CARE 8 VHS and EUNEIGNS sie ee se ie ee een 10 Using Your EGS SVSlel aussen 12 Base Station ODeratiON see es en ees ee eg ee ee gee ae eg Eg 12 Using Your Remote Epiese ee EE rierE 18 Wireless Speaker Operation N N eier 19 WS OTIC ee ee 24 EE SA AT EE IE ER EE EN NE 27 Important Safety Instructions Please take the time to follow the instructions in this owner s guide carefully It will help you set up and operate your system properly and enjoy all of the advanced features Please save this owner s guide for future reference WARNING The grill and screws around the subwoofer can get hot Care should be taken when touching this area WARNING To reduce the risk of fire or electrical shock do not expose the product to rain or moisture Avoid prolonged exposure to direct sunlight WARNING Liquids can cause a failure and or a fire hazard The apparatus shall not be exposed to liquid dripping or splashing Avoid placing objects filled with liquids such as coffee cups soda cans or vases on the apparatus As with any electronic product use care not to spill liquids into any part of the system WARNING No open flame sources such as lighted candles should be placed on the ap paratus Note The product label is located on the bottom of the product This product is inten
17. n blue LED is blinking blue Antenna LED is off Antenna LED is off Wireless Speaker is out of Move Wireless Speaker closer range to the Base Station or turn on Range Extender Switch Wireless Speaker not linked See instructions Linking to your Base Station Wireless Speakers Receivers to a Specific Base Station Picking up audio from Another Eos wireless See instructions for Linking another Eos system system in close proximity Wireless Speakers Receivers to a Specific Base Station Troubleshooting Symptom Possible Problem Solution iPod Problems EEE ieee iPod screen frozen Press and hold the MENU and select center button until Apple appears on the screen iPod not charging Check to see the iPod is firmly seated in the dock Remove and replace the iPod in the dock you may need to do this a couple of times Remote Control Your remote control only works with the Eos base station it will not control the remote speaker s power or volume Control Need additional help Try our Product Support page at www eoswireless com productsupport or call us Monday through Friday 8 30AM to 5PM Pacific Time at 877 465 3927 Warranty Limited Warranty IntelliTouch warrants this product to be free from manufacturing defects in material and workmanship under normal use and conditions for a period of 1 year from date of original purchase in the United States In order to validate your warranty you must register
18. received the Eos Base Station can resend it Eos AUX RANGEEX LINK default delay Range Extender Off is 20ms Turning on the Range Extender Switch increases the delay to 64ms The increased delay allows Eos to resend more audio packets due to distance from the transmitter or ambient interference Note Due to the 64ms delay if an Eos Base Station and Wireless Speaker are in the same room aslight echo effect is apparent Using Your Eos System Using Your Remote Control The Remote controls the basic functions of your iPod while it is docked in the Eos Base Station For best results aim the Remote Control towards the lower right corner of the grill area Speaker Button Mutes the Base Station speakers Volume Up Down In play mode press to adjust volume of Base Station speakers Select Down Rew Button In play mode press to move down a track or press and hold to rewind Select Forward FF Button In play mode press to move up a track or press and hold to fast forward Play Pause Button Plays track In play mode press to pause ZI ey To install or replace the battery for the remote control The Remote Control battery is already installed at the factory If the Remote Control stops operating or its range seems reduced replace the battery with a new one The battery door is located on the back end of the unit 1 Squeeze the notched tab A while pulling the battery door latch B out to
19. remove the battery holder 2 Insert a CR2032 3V lithium battery Make sure the polarity and side of the bat tery is correct 3 Replace the battery holder back in the Remote Control Please discard the used batteries properly Battery door Using Your Eos System Wireless Speaker Operation The Wireless Speaker can be used as a wall mounted speaker power supply nested in the back of the speaker enclosure or as a desktop bookshelf speaker power supply removed from the speaker enclosure Powering Your Wireless Speaker 1 Plug your Wireless Speaker into any wall outlet located no more than 150 feet from the Eos Base Station 2 Turn the Volume Knob clockwise to power the Wireless Speaker Note When power is applied to the Wireless Speaker the blue Antenna LED will illuminate and flash The blue Antenna LED will flash while the Wireless Speaker searches for the Base Station Once the wireless link has been established the blue Antenna LED will remain illuminated Antenna LED status Flashing Wireless Speaker is searching for the Base Station Solid Wireless Speaker is linked with the Base Station Off Wireless Speaker is powered off Using Your Eos System Removing the Integrated Power Supply From the Wireless Speaker To use your Wirel
20. to an outlet on a different circuit than the one to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help This product complies with the Canadian ICES 003 Class B specification Eos Wireless Products are designed and manufactured by IntelliTouch 5160 Carroll Canyon Rd San Diego CA 92121 Questions Visit www eoswireless com Phone toll free 877 465 3927 A Consumer Guide to Product Safety Warranty Your Eos digital Wireless Speaker system is covered by a one year limited warranty For details see the Eos Warranty section of this manual To register your product go online to www eoswireless com registration Technical Information Power rating Input 100 240 VAC 50 60Hz Output 15 VDC 1 3A Wireless specifications 150 ft indoors 300 ft outside Range 1 5 Mbps Wireless Transmission Data Rate Digital Spread Spectrum Technology Dynamic Frequency Hopping Modulation Scheme Operates in the 2400 to 2483 M Frequency Range Proprietary Advanced Error Protection amp Correction Interference Free from WiFi Bluetooth or Cordless Phones Environmental Requirements Operating temperature 32 to 95 F 0 to 35 C Non operating temperature 4 to 113 F 20 to 45 C Relative humidity 5 to 95 non condensing Quick Start Parts Checklist 1 2 8 4 5 6 7 This Owner s Manual Eos Base Station Base Station Power Adapter Wireless Stereo Spe
21. using the keys on the left side of the Base Station iPod is not playing Check iPod screen to confirm iPod is playing Wrong source chosen iPod Check the source indicator LEDs to confirm that the desired source is selected Press the SOURCE button to select between AUX and iPod Too much bass treble or iPod EQ settings not Set iPod EQ setting please less than optimal sound optimized see manual section titled Customizing Eos Echo sound delay Range Extender Switch on Turn range extender off or between Base Station move the Wireless Speaker into speaker and Wireless another room Speaker Troubleshooting Symptom Possible Problem Solution Wireless Speaker S Unit does not respond AC adapter isnot plugged Unplug and re plug the blue Antenna LED is off into wall outlet or the connector to the back ofthe connector in the back of Wireless Speaker the Wireless Speaker is not connected properly No Sound blue Antenna Volume to low Turn volume control clockwise LED is solid No audio playing at Base Confirm playback by listening Station the to speakers on the Base Station If no sound is heard from the Base Station check the Base Station troubleshooting section above Sound from Wireless Unstable link with the Base Move Wireless Speaker closer Speaker is intermittent Station to the Base Station or turn on Range Extender No sound blue Antenna Base Station transmitter off Press transmitter butto
22. your product by going on line www eoswireless com or by calling 877 465 3927 between Monday through Friday 8 30AM to 5PM Pacific Time Should service be necessary under this warranty for any reason due to manufacturing de fect during this 1 year period from date of original purchase IntelliTouch will either repair the unit or replace it with a reconditioned unit at no charge Units Scheduled for Exchange and or Return should be sent to IntelliTouch 5160 Carroll Canyon Road San Diego CA 92121 Pack the unit in a well padded heavy corrugated box e Enclose proof of purchase Enclose your check or money order payable to IntelliTouch in the amount of 20 00 to cover shipping and handling costs e Enclose your name return addess and contect number Ship the unit prepaid via UPS or parcel post insured Note This warranty is void if the product is a Damaged through negligence misuse abuse moisture or accident b Modified in any way c Damaged because it is improperly connected to the equipment of other manufacturers This warranty does not cover a Damage to equipment not properly connected to the product b Costs incurred in the shipping of the product to IntelliTouch c Damage or improper operation of unit caused by customer abuse misuse negli gence or failure to follow operating instructions provided with the product d Ordinary adjustments to the product that can be performed by customer as
Download Pdf Manuals
Related Search