Echo EDR-210 Remote Starter User Manual
Contents
1. 2 Operating Techniques 2 5 Bree 6 ET EE 7 Operat Om aae 7 Maintenance and a adoa EA a EEEE RETA 11 12 Miei eU 13 15 Specifications s 16 Warranty statements eee 17 Specifications descriptions and illustrative material in this literature are as accurate as known at the time of publication but are subject to change without notice Illustrations may include optional equipment and accessories and may not include all standard equipment Copyright 2002 YAMABIKO CORPORATION Rights Reserved INTRODUCTION ECHO Engine Drill EDR 210 is a lightweight high performance two stroke engined unit designed for drilling This Manual provides the information necessary for operation and maintenance A WARNING IMPROPER USE OR CARE OF THIS UNIT OR FAILURE TO WEAR PROPER PROTECTION CAN RESULT IN SERIOUS INJURY READ AND UNDERSTAND THE RULES FOR SAFE OPERATION AND ALL INSTRUCTIONS IN2. Fuel Mix Chart 50 1 US METRIC Gasoline Oil Gasoline Oil Gallons US fl oz L mL 1 2 6 4 80 2 5 2 8 160 5 12 8 20 400 CHECK UP OF NUTS AND OTHER HARDWARES e Check up loose nuts bolts and screws before using the unit every day FUEL STATEMENT GASOLINE Use 89 Octane R M 2 mid grade or higher gasoline or gasohol known to be good quality Gasohol may contain up to 10 96 Ethyl grain alcohol or 15 MTBE methyl tertiary butyl ether Gasohol containing methyl wood alcohol is NOT approved TWO STROKE OIL A two stroke engine oil meeting ISO L EGD ISO CD 13738 and JASO M345 FC FD Standards must be used ECHO brand premium Power Blend X Universal 2 Stroke Oil meets these standards Engine problems due to inadequate lubrication caused by failure to use an ISO L EGD ISO CD 13738 and JASO M345 FC FD certified oil such as ECHO premium Power Blend X will void the two stroke engine warranty Emission related parts only are covered for two years regardless of two stroke oil used per the statement listed in the Emission Defect Warranty Explanation IMPORTANT ECHO premium Power Blend X Universal 2 Stroke Oil may be mixed at 50 1 ratio for application in all ECHO engines sold in the past regardless of ratio specified in those manuals Use of unmixed improperly mixed or fuel older than 90 days stale fuel may cause hard starting poor performance or sev
3. Department at 1 800 673 1558 or contact us through the web at WWW ECHO USA COM PRODUCT WARRANTY PERIOD RESIDENTIAL APPLICATION 5 YEAR WARRANTY All units for residential or non income producing use will be covered by this limited warranty for five 5 years from date of purchase EXCEPTIONS For two stroke engine powered products the electronic ignition module flexible drive cables SRM solid drive shafts and TC tines are warranted for the life of the product on parts only Cutting attachments such as but not limited to bars chains sprockets blades and nylon trimmer heads for residential or non income producing use will be covered for failures due to defects in material or workmanship for a period of 60 days from original product purchase date Any misuse from contact with concrete rocks or other structures is not covered by this warranty ECHO s Rapid Loader String Head carries a lifetime warranty on the line locking system parts only no labor Refer to your operator s manual for string head installation and maintenance instructions All SB Series and PRO ATTACHMENT SERIES Split Shaft attachments carry the same warranty duration as the units they are designed to fit COMMERCIAL APPLICATION 1 YEAR WARRANTY All Chain Saws QuikVent Saws and Cut Off Saws for commercial institutional agricultural industrial or income producing use will be covered by this limited warranty for one 1 year from the date of p
4. ELCHE OPERATOR S MANUAL ENGINE DRILL EDR 210 A WARNING READ INSTRUCTIONS CAREFULLY AND FOLLOW RULES FOR SAFE OPERATION FAILURE TO DO SO COULD RESULT IN SERIOUS INJURY ECHO INCORPORATED 400 Oakwood Road Lake Zurich Illinois 60047 1564 Phone 847 540 8400 X750 004 57 6 X750409 3506 Printed in Japan 1305Bm 1507 ES A WARNING A Some dust created by power sanding sawing grinding drilling and other construction activities contains chemicals known to the State of California to cause cancer birth defects or other reproductive harm Some examples of these chemicals are e Lead from lead based paints e Crystalline silica from bricks and cement and other masonry products and e Arsenic and chromium from chemically treated lumber Your risk from these exposures varies depending on how often you do this type of work To reduce your exposure to these chemicals work in a well ventilated area and work with approved safety equipment such as those dust masks that are specially designed to filter out microscopic particles A WARNING A The engine exhaust from this product contains chemicals known to the State of California to cause cancer birth defects or other reproductive harm CONTENTS EVE OCCU ON ces cere cacti sec EE 1 Safety and Special Information 2 iid a 1 BI eicere 1 Safely radere
5. THIS MANUAL SAFETY AND SPECIAL INFORMATION DANGER The safety alert symbol accompanied by the word DANGER calls attention to an act or condition which WILL lead to serious personal injury or death if not avoided CIRCLE AND SLASH SYMBOL This symbol means the specific action shown is prohibited Ignoring these prohibitions can result in serious or fatal injury WARNING The safety alert symbol accompanied by the word WARNING calls attention to an act or condition which CAN lead to serious personal injury or death if not avoided CAUTION The safety alert symbol accompanied by the word CAUTION calls attention to an act or condition which may lead to minor or moderate personal injury if not avoided NOTE This enclosed message provides tips for use care and maintenance of the unit IMPORTANT The enclosed message provides information necessary for the protection of the unit Throughout this manual and on the product itself you will find safety alters and helpful information messages preceded by symbols or key words The following is an explanation of those symbols and key words and what they mean to you DECALS AND SYMBOLS Carefully read the operator s manual Beware of high temperature areas Wear eyes ears and head protection ae 2 Finger severing ai SAFETY A WARNING ENGINE DRILL USERS RISK INJURY TO THEMSELVES AND O
6. a firm grip on the engine drill with both hands one hand on the front handle the other hand on the rear handle drilling at full throttle speed Drilling at less at than full speed can damage the clutch by allowing it to slip A WARNING USE A FIRM GRIP WITH THUMBS AND FINGERS ENCIRCLING THE HANDLES A FIRM GRIP WILL HELP YOU KEEP CONTROL OF THE ENGINE DRILL NEVER OPERATE THE ENGINE DRILL ONLY ONE HAND OR BODILY INJURY CAN OCCUR e Always carry the engine drill with the engine stopped and the HOT muffler away from your body PROTECTIVE EQUIPMENT e Always wear eye protection goggles that meet ANSI 287 1 standards Wear hearing protection ECHO recommends that hearing protection be worn at all times e Dress properly Do not wear loose clothing or jewellery they can be caught in moving parts Use of sturdy gloves non skid footwear and safety glasses is recommended e While operating the machine always be sure of a secure position e Wear non slip heavy duty work gloves to improve your grip on the engine drill handles The gloves also help reduce the transmission of machine vibrations to your hands PROTECTING OTHERS Spectators children fellow workers and animals must be warned to come no nearer than 4 6 m 15 feet while the engine drill is in use People working in the area near you should wear the same protective equipment as the operator PHYSICAL CONDITION You
7. section of this warranty statement for Life free of charge for a period of ten 10 years after the date of the complete unit s final production 17 PURCHASED REPAIR PARTS SHORT BLOCKS AND ACCESSORIES 90 day residential or non income producing warranty 30 day commercial institutional agricultural industrial income producing or rental application warranty ATTENTION TWO STROKE ENGINE POWER PRODUCT OWNERS This ECHO two stroke engine power product is a quality engineered unit which has been manufactured to exact tolerances to provide superior performance To help ensure the performance of the unit it is required to use two stroke oil which meets the ISO L EGD Standard per ISO CD 13738 and JASO M345FD Standards ECHO Power Blend Two Stroke Oil is a premium two stroke oil specifically formulated to meet ISO L EGD ISO CD 13738 and JASO M345FD Standards The use of two stroke oils designed for other applications such as for outboard motors or lawnmowers can result in severe engine damage and will void your two stroke engine limited warranty THIS WARRANTY DOES NOT COVER DAMAGE CAUSED BY Lack of lubrication or engine failure due to the use of two stroke oils that do not meet the ISO L EGD ISO CD 13738 and JASO M345FD Standards Engine problems due to inadequate lubrication caused by failure to use an ISO L EGD compliant and JASO M345FD registered oil will void the two stroke engine limited warranty ECHO Power Blend Two St
8. year 2012 and later equipment only fuel supply hoses certified by EPA can be used to replace the original equipment supply hose Fines up to 37 500 may be enforced for using an un certified replacement part f IL 0 6 0 7 mm 0 024 0 028 in 13 AIR FILTER e Clean before use Remove air cleaner cover and pull out air filter Lightly brush off dust or wash it in water and detergent Dry completely before putting it back in place FUEL FILTER e Check periodically Do not allow dust to enter into fuel tank Clogged filter will cause difficulty in starting engine or poor engine performances Pick up fuel filter through fuel inlet port with a piece of steel wire or the like When filter is dirty replace it CHECK FUEL SYSTEM e Check before every use e After refueling make sure fuel does not leak or exude from around fuel pipe fuel grommet or fuel tank cap e Incase of fuel leakage or exudation there is a danger of fire Stop using the machine immediately and request your dealer to inspect or replace SPARK PLUG e Check periodically The standard spark gap is 0 6 to 0 7 mm 0 024 to 0 028 in Correct spark gap if it is wider or narrower than the standard gap Ifthe electrodes are coated with carbon deposits replace with a new spark plug Do not sandblast to clean Remaining sand will damage engine e Fastening torque 15 17 Nem 130 to 145 in Ib IM
9. ARTING WARM ENGINE e Place ignition switch in ON START RUN position e Pull starter handle until the engine fires Do use the choke STOPPING ENGINE e Set throttle trigger in idle position Place ignition switch in STOP position NOTE When engine does not stop shift choke lever to close position Check and repair ignition switch before starting the engine again i Counter 7 clockwise CCW Clockwise REVERSE ROTATION e This model is equipped with reverse rotation mechanism e When drilling set shift lever down to clockwise CW rotation position e If bit is locked due to deep penetration during drilling operation set shift lever up to counterclockwise CCW rotation position and operate reversed for easy pulling out CW When changing direction of drill rotation operate as follows Return engine to idle Engine shift lever to CW or CCW position with a slight acceleration of the throttle trigger To properly lock the gears in the gear case Donot operate shift lever forcibly when changing rotation direction A WARNING WHEN THE DRILL CAN NOT PULL OUT FROM THE WOOD DO NOT TRY TO PULL OUT THE DRILL BY FORCE WHEN CHANGING THE BIT ENSURE TO STOP THE ENGINE AFTER A JOB BIT AND GEAR CASING MAY BE HEATED DO NOT TOUCH THEM WITH BARE HANDS Do not shift from forward to reverse or vice ve
10. PORTANT Do not over tighten plug Box spanner 10 mm Spanner 19 mm Hexagonal bar Part Number 895412 20960 Idle speed adjustment screw High Altitude Operation This engine has been factory adjusted to maintain satisfactory starting emission and durability performance up to 1100 feet above sea level ASL 96 0 kPa To maintain proper engine operation and emission compliance above 1100 feet ASL the carburetor may need to be adjusted by an authorized ECHO service dealer IMPORTANT If the engine is adjusted for operation above 1100 feet ASL the carburetor must be readjusted when operating the engine below 1100 feet ASL otherwise severe engine damage may result REPLACEMENT OF CHUCK Replacement of chuck should be done in the following manner 1 Remove bolt with hexagonal hole fixed in the driving axle 2 Insert accessory hexagonal bar Part Number 895412 20960 into chuck and fix 3 Fit 19 mm spanner onto driving axle and keep it fitted 4 Fit 10 mm box spanner onto the hexagonal bar and turn it into direction as indicated by an arrow to remove chuck 5 Fita new chuck in the reversed order of removing ADJUSTING CARBURETOR As Required GENERAL INFORMATION The idle speed adjuster screw controls the throttle opening at the idle position IDLE ADJUSTMENT 1 Start engine and allow it to run at high idle until warm 2 Turn the idle spee
11. THERS IF THE ENGINE DRILL IS USED IMPROPERLY AND OR SAFETY PRECAUTIONS ARE NOT FOLLOWED PROPER CLOTHING AND SAFETY GEAR MUST BE WORN WHEN OPERATING ENGINE DRILL A WARNING ALWAYS STOP THE ENGINE WHEN A DRILL JAM OCCURS DO NOT ATTEMPT TO REMOVE AN OBJECT CAUSING A DRILL JAM IF THE ENGINE IS RUNNING PHYSICAL INJURY CAN OCCUR IF A DRILL JAM IS REMOVED AND THE DRILLS START MOVING OPERATOR SAFETY e Read this Engine drill Operators Manual carefully Be sure you understand how to operate this unit properly before you use it e familiar with all the controls and the proper use of the machine e Wear proper clothing to protect legs and other exposed parts of your body e Wear non skid sole shoes Do not wear open toed shoes or operate unit while bare footed e Wear eye and hearing protection devices e Use caution when handling fuel Put the caps back tightly on both the fuel can and the engine drill fuel tank Move at least 3 m 10 feet from the re fueling point and be sure there is no leakage of fuel from the fuel tank cap or the fuel system before starting the engine e Operate this gasoline powered engine equipment in a well ventilated area only e Start the unit on the ground with the throttle set at idle Do not start if the drills are obstructed by the ground or any other object e Never allow children to use the machine e Do not allow anyone to hold the material you are drilling Keep
12. a blockage checking maintenance or working on the machine Handle fuel with care it is highly flammable Never add fuel to a machine with a running or hot engine Do not attempt to repair the machine unless you are qualified to do so Do not operate the machine with a damaged or excessively worn drill bit Always ensure all handles and guards are fitted when using the machine Never attempt to use an incomplete machine or one fitted with an unauthorized modification When transporting or storing the machine always remove the drill bit To reduce fire hazard keep engine and silencer free of debris leaves or excessive grease Handle drill with care contacting with drills may cause injury DESCRIPTION MECHO OPERATOR S MANUAL ENGINE DRILL EDR 210 WARNING FULLY AND FOLLOW RULES FOR 15 13 Part Number X505 002570 Ls Part Number X505 002310 Part Number X505 002570 Ifa decal cannot be read a new one can be ordered from your ECHO dealer Operator s manual Included with unit Read 9 Fuel tank Contains fuel and fuel filter before operation and keep for future reference 10 Fuel tank cap For closing the fuel tank to leam proper safe operaling techniques 11 Air cleaner cover Covers air filter tagger Device Beaveted by 12 Starter handle Pull handle to start the operator s finger for controlling the engine engine spee
13. d 13 Throttle trigger lockout Device that tandis located unrest om ie prevents the accidental operation of the throttle n trigger until manually released 14 Ignition switch Device for allowing the 6 Chuck 15 Spark plug 7 Shift lever 8 Front handle Handle located on the front gear case ASSEMBLING Plug Chuck Drill bit Tighten three points evenly FRONT HANDLE e Insert the front handle to the machine and turn clockwise TIGHTEN THE SCREW FIRMLY To operate front handle with right hand remove right plug then reverse sides when installing handle and plug DRILL BIT e Insert the drill bit not provided with unit until it reaches the bottom of the chuck then back it out slightly tighten the chuck laws evenly and completely IMPORTANT Use drill bits suited for the material being drilled and for the depth of hole required OPERATION A WARNING ALTERNATIVE FUELS SUCH AS E 20 20 ETHANOL E 85 85 ETHANOL OR ANY FUELS NOT MEETING ABOVE REQUIREMENTS ARE NOT APPROVED FOR USE IN ECHO 2 STROKE GASOLINE ENGINES USE OF ALTERNATIVE FUELS MAY CAUSE PERFORMANCE PROBLEMS LOSS OF POWER OVERHEATING FUEL VAPOR LOCK AND UNINTENDED MACHINE OPERATION INCLUDING BUT NOT LIMITED TO IMPROPER CLUTCH ENGAGEMENT ALTERNATIVE FUELS MAY ALSO CAUSE PREMATURE DETERIORATION OF FUEL LINES GASKETS CARBURETOR AND OTHER ENGINE COMPONENTS
14. d screw clockwise until drill bit begins to move 3 Turn idle screw counterclockwise 1 and 1 2 to 2 turn or until the drill bit stops 2700 to 3300 r min NOTE When there is some trouble with the carburetor contact your dealer CLEANING CYLINDER FINS Check Periodically NOTE Clogged fins will cause poor engine cooling 1 Carefully remove housing and clean dirt and dust from fins 2 Reinstall housing CLEANING SILENCER AND EXHAUST PORT Check Periodically 1 Carefully remove housing halves 2 Remove and disassemble silencer NOTE Be careful not to scratch the cylinder or piston when cleaning the cylinder exhaust port 3 Clean deposits from cylinder exhaust port and silencer STORAGE LONG TERM STORAGE Over 30 Days Do not store your unit for a prolonged period of time 30 days or longer without performing protective storage maintenance which includes the following 1 Store unit in a dry dust free place out of the reach of children and other unauthorized persons 2 Place ignition switch in STOP position 3 Remove accumulation of grease oil dirt and debris from exterior of unit 4 Perform all periodic lubrication and services that are required 5 Tighten all the screws bolts and nuts 6 Drain the fuel tank completely and pull the recoil starter handle several times to remove fuel from the carburetor 7 Remove the spark plug and pou
15. enance as outlined in the operators manual is the customer s responsibility Failures due to improper set up pre delivery service or repair service by anyone other than authorized ECHO servicing dealer during the warranty period Certain parts and other items are not warranted including but not limited to lubricants starter cords and engine tune ups Use of spark plugs other than those meeting performance and durability requirements of the OEM spark plug listed in the Operator s Manuals Overheating or carbon scoring failures due to restricted clogged exhaust port or combustion chamber including damage to spark arrester Screen Adjustments after the first 30 thirty days and beyond such as carburetor adjustment and throttle cable adjustment Damage to gears or gear cases caused by contaminated grease or oil use of incorrect type or viscosity of lubricants and or failure to comply with recommended grease or oil change intervals Damage caused by loading SHRED N VAC beyond recommended capacity Damage caused by pump or sprayer running dry pumping or spraying caustic or flammable materials or lack of or broken strainers Additional damage to parts or components due to continued use after operational problem or failure occurs Should operational problem or failure occur the product should not be used but delivered as is to an authorized ECHO servicing dealer Itis a dealer s and or customer s responsibility to complete and re
16. ere engine damage and void the product warranty Read and follow instructions in the Storage section of this manual A DANGER FUEL IS VERY FLAMMABLE USE EXTREME CARE WHEN MIXING STORING OR HANDLING OR SERIOUS PERSONAL INJURY MAY RESULT USE AN APPROVED FUEL CONTAINER DO NOT SMOKE NEAR FUEL DO NOT ALLOW FLAMES OR SPARKS NEAR FUEL FUEL TANKS CANS MAY BE UNDER PRESSURE ALWAYS LOOSEN FUEL CAPS SLOWLY ALLOWING PRESSURE TO EQUALIZE NEVER REFUEL A UNIT WHEN THE ENGINE IS HOT NEVER REFUEL A UNIT WITH THE ENGINE RUNNING DO NOT FILL FUEL TANKS INDOORS ALWAYS FILL FUEL TANKS OUTDOORS OVER BARE GROUND DO NOT OVERFILL FUEL TANK IT IS NOT PERMITTED TO FILL FUEL ABOVE THE SHOULDER LEVEL OF FUEL TANK WIPE UP SPILLS IMMEDIATELY SECURELY TIGHTEN FUEL CAP AFTER REFUELING INSPECT FOR FUEL LEAKAGE IF FUEL LEAKAGE IS FOUND DO NOT START OR OPERATE UNIT UNTIL LEAKAGE IS REPAIRED MOVE AT LEAST 3 M 10 FEET FROM REFUELING LOCATION BEFORE STARTING THE ENGINE Shoulder level HANDLING FUEL MIXING INSTRUCTIONS 1 Fill an approved fuel container with half of the required amount of gasoline 2 Add the proper amount of two stroke oil to gasoline 3 Close container and shake to mix oil with gasoline 4 Add remaining gasoline close fuel container and remix IMPORTANT Spilled fuel is a leading cause of hydrocarbon emissions Some states may require the use of automatic
17. ered by this warranty All parts or products replaced under warranty become the property of ECHO Inc This warranty is separate from the Emission control warranty statement supplied with your new product Please consult the Emission Control Warranty Statement for details regarding emission related parts For a list of Authorized ECHO Dealers refer to WWW ECHO USA COM or call 1 800 432 ECHO OWNER S RESPONSIBILITY To ensure trouble free warranty coverage it is important that you register your ECHO equipment on line at WWW ECHO USA COM or by fill ing out the warranty registration card supplied with your unit Registering your product confirms your warranty coverage and provides a direct link if we find it necessary to contact you The owner shall demonstrate reasonable care and use and follow preventative maintenance storage fuel and oil usage as prescribed in the operator s manual Should a product difficulty occur you must at your expense deliver or ship your ECHO unit to an authorized ECHO servicing dealer for warranty repairs within the applicable warranty period and arrange for pick up or return of your unit after the repairs have been made For your nearest authorized ECHO servicing dealer call ECHO s Dealer Referral Center at 1 800 432 ECHO or you can locate an ECHO servicing dealer at WWW ECHO USA COM Should you require assistance or have questions concerning ECHO s Warranty Statement you can contact our Consumer Product Support
18. fuel shut off containers to reduce fuel spillage Stored fuel ages Do not mix more fuel than you expect to use in thirty 30 days ninety 90 days when a fuel stabilizer is added Stored two stroke fuel may separate ALWAYS shake fuel container thoroughly before each use AFTER USE DO NOT store a unit with fuel in its tank Leaks can occur Return unused fuel to an approved fuel storage container STORAGE Fuel storage laws vary by locality Contact your local government for the laws affecting your area As a precaution store fuel in an approved airtight container Store in a well ventilated unoccupied building away from sparks and flames Throttle trigger Air cleaner STARTING COLD ENGINE A WARNING WHEN ENGINE IS STARTED CONFIRM IF THERE IS NOT ANY ABNORMAL VIBRATION OR SOUND IF THERE IS ABNORMAL VIBRATION OR SOUND ASK YOUR DEALER TO REPAIR e Stand the engine upright on a level surface e Place ignition switch in ON START RUN position e Push purge bulb to 4 times or until fuel is visible in fuel return line e Shift choke lever to close position START e Pull starter handle until the engine fires e Shift choke lever to full open position and if necessary start the engine again and allow to warm up before using The clutch engages at approximately 3500 r min Therefore the drill bit may rotate at fast idle engine speed ST
19. hragm type flywheel magneto CDI system BPM8Y recoil starter automatic centrifugal Fuel mixture ratio gasoline fuel consumption at engine maximum power 50 1 ratio with ECHO Power Blend X ISO L EGD ISO CD 13738 and JASO M345 FC FD two stroke air cooled engine oil Use 89 octane unleaded Do not use fuel containing methyl alcohol more than 10 ethyl alcohol or 15 MTBE Do not use alternative fuels such as E 20 or E 85 0 47 15 9 US fl oz WARRANTY STATEMENTS ECHO LIMITED WARRANTY STATEMENT FOR PRODUCT SOLD IN USA AND CANADA BEGINNING 01 01 2010 ECHO S RESPONSIBILITY ECHO Incorporated s Limited Warranty provides to the original purchaser that this ECHO product is free from defects in material and workmanship Under normal use and maintenance from date of purchase ECHO agrees to repair or replace at ECHO s discretion any defective product free of charge at any authorized ECHO servicing dealer within listed below application time periods limitations and exclusions THIS LIMITED WARRANTY IS ONLY APPLICABLE TO ECHO PRODUCTS SOLD BY AUTHORIZED ECHO DEALERS IT IS EXTENDED TO THE ORIGINAL PURCHASER ONLY AND IS NOT TRANSFERABLE TO SUBSEQUENT OWNERS EXCEPT FOR EMISSION RELATED PARTS Repair parts and accessories replaced under this warranty are warranted only for the balance of the original unit or accessory warranty period Any damage caused by improper installation or improper maintenance is not cov
20. ition switch off Electrical problem Turn switch on Ask your ECHO dealer Spark at plug No spark at plug e Spark gap incorrect Covered with carbon Fouled with fuel Spark plug defective Adjust 0 6 to 0 7 mm 0 024 to 0 028 in Clean or replace Clean or replace Replace plug Engine does not crank Internal engine problem Ask your ECHO dealer Engine runs Dies or accelerates poorly Air filter dirty Fuel filter dirty Fuel vent blocked e Spark plug Carburetor Cooling system blocked Exhaust port spark arrester screen blocked Clean or replace Clean or replace Clean Clean and adjust replace Adjust Clean Clean A WARNING ALL ENGINE DRILL SERVICE OPERATIONS OTHER THAN ITEMS LISTED IN THE OPERATOR S MANUAL SHOULD BE PERFORMED BY AN AUTHORIZED ECHO DEALER FUEL VAPORS ARE EXTREMELY FLAMMABLE AND MAY CAUSE FIRE AND OR EXPLOSION NEVER TEST FOR IGNITION SPARK BY GROUNDING SPARK PLUG NEAR CYLINDER PLUG HOLE OTHERWISE SERIOUS PERSONAL INJURY MAY RESULT 12 MAINTENANCE Air filter Fuel filter 7 ip Fuel tank cap N NOTE Federal EPA regulations require all model year 2012 and later gasoline powered engines produced for sale in the United States to be equipped with a special low permeation fuel supply hose between the carburetor and fuel tank When servicing model
21. n the Emission applicable emissions regulations provided that Control Information label sample below is C approved maintenance procedures are followed or T the emission control system is EM TWC as listed in the Maintenance Section of this 3 way catalyst The fuel tank fuel line emission manual control system is EVAP evaporative emissions Evaporative emissions for California models may EMISSION CONTROL INFORMATION only be applicable to fuel tanks ENGINE FAMILY EHXS xxxxxx DISPLACEMENT EMISSION COMPLIANCE PERIOD 300Houns ized THIS ENGINE MEETS U S EPA EXH EVP EMISSION An Emission Control Label is located on the REGULATIONS FOR MODEL YEAR REFER TO OHNER S MANUAL hs is an e Ria only information on FOR MAINTENANCE SPECIFICATIONS AND ADJUSTMENTS abel varies by engine family YAMABIKO CORP osx E 11 Trouble TROUBLE SHOOTING Engine hard to start does not start Cause Remedy Engine cranks Fuel at carburetor No fuel at carburetor Fuel filter clogged Fuel line clogged Carburetor Clean or replace Clean Ask your ECHO dealer Fuel at cylinder No fuel at cylinder Carburetor Ask your ECHO dealer Silencer wet with fuel Fuel mixture is too rich Open choke Clean replace air filter Adjust carburetor Ask your ECHO dealer Spark at end of plug wire No spark at end of plug wire Ign
22. ness and extreme pain in those areas Certain repetitive hand activities may put you at a high risk for developing a Repetitive Stress Injury RSI An extreme RSI condition is Carpal Tunnel Syndrome CTS which could occur when your wrist swells and squeezes a vital nerve that runs through the area Some believe that prolonged exposure to vibration may contribute to CTS CTS can cause severe pain for months or even years To reduce the risk of RSI CTS do the following e Avoid using your wrist in a bent extended or twisted position Instead try to maintain a straight wrist position Also when grasping use your whole hand not just the thumb and index finger e periodic breaks to minimize repetition and rest your hands e Reduce the speed and force with which you do the repetitive movement e Do exercise to strengthen the hand and arm muscles e See a doctor if you feel tingling numbness or pain in the fingers hands wrists or arms The sooner RSI CTS is diagnosed the more likely permanent nerve and muscle damage can be prevented OPERATING TECHNIQUES When starting to drill run the engine at full throttle A WARNING BEFORE DRILLING BE SURE TO READ AND UNDERSTAND THE ENTIRE OPERATOR S MANUAL TO AVOID THE CHANCE OF SERIOUS INJURY Do not force the drills and only move as quickly as the drills will allow Stop the engine and disconnect from ignition cable before cleaning or when clearing
23. r 1 2 tablespoon 1 4 oz of fresh clean 2 stroke engine oil into the cylinder through the spark plug hole A Place a clean cloth over the spark plug hole B Pull the recoil starter handle 2 or 3 times to distribute the oil inside the engine C Observe the piston location through the spark plug hole Pull the recoil starter handle slowly until the piston reaches the top of its travel and leave it there 8 Install the spark plug do not connect ignition cable 9 Lubricate the drill bit with a heavy coat of oil to prevent rust A WARNING DO NOT STORE IN AN ENCLOSURE WHERE FUEL FUMES MAY ACCUMULATE OR REACH AN OPEN FLAME OR SPARK NOTE For future reference you should keep this operator s manual 15 SPECIFICATIONS EDR 210 Mass without drill bit 4 6 10 1 Ib Volume fuel tank 0 5 16 9 US fl oz Drill size chuck capacity speed 32 178 1 25 7 inch 13 0 5 inch 520 Mission reduction ratio lubrication 17 1 regular side 18 6 reverse side grease External Dimensions length x width x height without drill bit 430 x 320 x 265 16 9 x 12 6 x 10 4 inch Engine type engine displacement recommended maximum engine speed recommended engine idling speed engine speed at beginning of clutch engagement carburetor ignition spark plug starter clutch Air cooled Two stroke single cylinder 21 2 1 29 cu inch 9000 2900 4000 diap
24. r judgement and dexterity may be impaired if you are ill or have taken alcohol or other substances known to affect the way you would normally function A WARNING PRECAUTION AGAINST VIBRATION AND COLD IT IS BELIEVED THAT A CONDITION CALLED RAYNAUD S PHENOMENON WHICH AFFECTS THE FINGERS OF CERTAIN INDIVIDUALS MAY BE BROUGHT ABOUT BY EXPOSURE TO VIBRATION AND COLD EXPOSURE TO VIBRATION AND COLD MAY CAUSE TINGLING AND BURNING SENSATIONS FOLLOWED BY LOSS OF COLOR AND NUMBNESS IN THE FINGERS THE FOLLOWING PRECAUTIONS ARE STRONGLY RECOMMENDED BECAUSE THE MINIMUM EXPOSURE WHICH MIGHT TRIGGER THE AILMENT IS UNKNOWN e KEEP YOUR BODY WARM ESPECIALLY THE HEAD NECK FEET ANKLES HANDS AND WRISTS MAINTAIN GOOD BLOOD CIRCULATION BY PERFORMING VIGOROUS ARM EXERCISES DURING FREQUENT WORK BREAKS AND ALSO BY NOT SMOKING LIMIT THE HOURS OF OPERATION TRY TO FILL EACH DAY WITH JOBS WHERE OPERATING THE ENGINE DRILL OR OTHER HAND HELD POWER EQUIPMENT IS NOT REQUIRED IF YOU EXPERIENCE DISCOMFORT REDNESS AND SWELLING OF THE FINGERS FOLLOWED BY WHITENING AND LOSS OF FEELING CONSULT YOUR PHYSICIAN BEFORE FURTHER EXPOSING YOURSELF TO COLD AND VIBRATION _ Painful or numb fingers See your doctor Repetitive Stress Injuries It is believed that over using the muscles and tendons of the fingers hands arms and shoulders may cause soreness swelling numbness weak
25. roke Oil meets the ISO L EGD and JASO M345FD Standard Emission related parts are covered for 5 years residential use or 2 years commercial use regardless of two stroke oil used per the statement listed in the EPA or California Emission Defect Warranty Explanation Damage caused by use of gasohol containing methanol wood alcohol or gasoline containing less than 89 octane Only use gasoline which contains 89 octane or higher Gasohol which contains a maximum 10 ethanol grain alcohol or 15 MTBE methyl tertiary butyl ether is also approved The prescribed mixing ratio of gasoline to oil is listed on the ECHO oil label and covered in your operator s manual Engine damage caused by use of ether or any starting fluids Damage caused by tampering with engine speed governor or emission components or running engines above specified and recommended engine speeds as listed in your operator s manual Operation of the unit with improperly maintained removed cutting shield or removed damaged air filter Damage caused by dirt pressure or steam cleaning the unit salt water corrosion rust varnish abrasives and moisture Defects malfunctions or failures resulting from abuse misuse neglect modifications alterations normal wear improper servicing or use of unauthorized attachments Incorrect storage procedures stale fuel including failure to provide or perform required maintenance services as prescribed in the operator s manual Preventative maint
26. rsa while the chuck is turning Failure to do so may cause unit damage Always release throttle and allow the unit to return to idle before shifting Do not stand close to drill or chuck with your body or clothes while operation When drilling ensure that no power cable or other obstacle exist 10 MAINTENANCE AND CARE MAINTENANCE BEFORE MONTHLY YEARLY DATE USE MAINTENANCE PERFORMED Air Filter Clean Replace Fuel Filter Inspect Clean Replace Spark Plug Inspect Clean Adjust Replace Carburetor Adjust Cooling System Inspect Clean Silencer Inspect Tighten Clean Starter Rope Inspect Replace Drills Inspect Clean Lubricate Fuel Leaks Inspect Screws Bolts and Inspect Nuts Tighten Replace Fuel Line Inspect IMPORTANT Time intervals are maximum Actual use and your experience will determine the frequency of required maintenance Record dates of monthly and yearly inspections EMISSION DATA EMISSION CONTROL PRODUCT EMISSION DURABILITY EXHAUST and EVAPORATIVE EMISSION COMPLIANCE PERIOD __ EPA 2010 and Later and or C A R B TIER Ill The 300 hours emission compliance period is The emission control system for the engine is EM the time span selected by the manufacturer engine modifi cation and if the second to last certifying the engine emissions output meets character of the Engine Family o
27. turn the warranty registration card supplied with your ECHO product or by visiting WWW ECHO USA COM Your receipt of purchase including date model and serial number must be maintained and presented to an authorized ECHO servicing dealer for warranty service Proof of purchase rests solely with the customer Some states do not allow limitations on how long an implied warranty lasts so the above limitations may not apply to you Some states do not allow the exclusion or limitation of incidental or consequential damages so you may also have other specific legal rights which vary from state to state This limited warranty is given by ECHO Incorporated 400 Oakwood Rd Lake Zurich IL 60047 DISCLAIMER OF IMPLIED WARRANTIES This limited warranty is in lieu of all other expressed or implied warranties including any warranty of FITNESS FOR A PARTICULAR PURPOSE OR USE and any implied warranty of MERCHANTABILITY otherwise applicable to this product ECHO and its affiliated companies shall not be liable for any special incidental or consequential damage including lost profits There are no warranties extended other than as provided herein This limited warranty may be modified only by ECHO 99922201032 11 18 2011 18 E01305001001 E01305999999
28. urchase 2 YEAR WARRANTY All other units for commercial institutional agricultural industrial or income producing use will be covered by this limited warranty for two 2 years from the date of purchase EXCEPTIONS For two stroke engine powered products the electronic ignition module flexible drive cables SRM solid drive shafts and TC tines are warranted for the life of the product on parts only Cutting attachments such as but not limited to bars chains sprockets blades and nylon trimmer heads for commercial institutional agricultural industrial rental or income producing will be covered for failures due to defects in material or workmanship for a period of 30 days from original product purchase date Any misuse from contact with concrete rocks or other structures is not covered by this warranty ECHO s Rapid Loader String Head carries a lifetime warranty on the line locking system parts only no labor Refer to your operator s manual for string head installation and maintenance instructions All SB Series and PRO ATTACHMENT SERIES Split Shaft attachments carry the same warranty duration as the units they are designed to fit RENTAL APPLICATION 90 DAYS WARRANTY Units for rental use will be covered against defects in material and workmanship for a period of 90 days from the date of purchase ECHOS liability under the Lifetime coverage is limited to furnishing parts specified under the PRODUCT WARRANTY PERIOD
Download Pdf Manuals
Related Search