Home

Dyson DC07 Vacuum Cleaner User Manual

image

Contents

1. A Release catches and remove the soleplate B Remove both brushbars and clear away thread and hair C To reassemble match the arrows on the brushbar to the arrows on central support D Align front of soleplate with front of tool and secure all 3 catches E Ensure slider is set as shown eq y Buiyy BuibuoyD suolonaysul Ajojos junpodw suo naysul Ajojos pjupnpodw Dyson customer care Important safety instructions Important safety instructions If you have a question about your Dyson call the Dyson helpline with your serial number found underneath your machine Important Information Check that your electricity supply corresponds to that shown on the rating plate The machine must be used as rated If the supply cord or the appliance is damaged disconnect from the electric outlet immediately The supply cord must be replaced by Dyson Inc or our appointed agent to avoid a hazard This appliance is not intended for use by young children or infirm persons without supervision Young children should be supervised to ensure that they do not play with the appliance Do not use the vacuum cleaner if the cord or plug are damaged or if the cleaner has been damaged dropped or has come in to contact with water or any other liquid In these cases contact the Helpline When vacuuming certain carpets may generate small static charges in the clear bin These are entirely harmles
2. Dry for at least 12 hours Ensure filter and case are completely dry before refitting onto the machine Finding blockages CAUTION e Turn power off and unplug before checking for blockages Failure to do so could result in electric shock or personal injury e f any part of your machine becomes blocked it may overheat and then automatically shut off Unplug machine and leave to cool down Please note Clearing blockages is not covered by your machine s limited warranty Beware of sharp objects when clearing blockages Replace all parts of the machine before using it If you hear a loud rachet noise it means the brushbar is obstructed Disconnect the machine before removing the obstruction eel pom u Check tools are clear of blockages T A Release wand from vacuum by pressing hose button and sliding hose off wand Check inside wand and hose for blockages B Press hose release button at front of machine and slide hose out with lower cord hook at rear 11 DC14 wand U bend inspection C Tilt machine forward slide out U bend and check inside for blockages Airway inspection D Squeeze valve release buttons and check inside for blockages Brushbar obstructions Lie cleaner on its front Undo soleplate fasteners using a coin and remove soleplate Remove lint and hair from brushbar Replace soleplate and tighten fasteners Ensure
3. and Bin emptying trigger Carry handle Motor protection valve Washable lifetime filter release button Shroud Hose release button Airway inspection valve __ Valve release buttons Brushbar on off Brushbar housing not steel yellow model Soleplate Airway inspection U bend Cord winder hook DC14 wand Hose Lower cable winder U bend release clip Assembling your DC14 AN CAUTION e Ensure the wand cap cover is closed e Ensure hose is kept straight when inserting wand into hose A Slide hose into guides at back of machine and click into place B Slide wand straight down in to hose until it clicks into place Ensure hose does not bend Click wand handle into top of machine Click tools into place Wind cable counter clockwise around cord winders and secure with clip To quickly release cord rotate cord wind release VLDaG ANOA Buljqueassy suolonaysul Ajojos junpodw suo onaysul Ajojps jupnpodw Using your DC14 Important safety instructions Important safety instructions Using your DC14 AX CAUTION e The machine is intended for domestic use only e Fine dust such as plaster dust should only be vacuumed in very small amounts e Do not press the cyclone release catch while carrying the machine e Ensure the cyclone pack is secured to the machine e Do not shake the machine whil
4. be present When vacuuming certain carpets may generate small static charges in the clear bin or wand These are not associated with the electricity supply To minimize any effect from this do not put your hand or insert any object into the clear bin unless you have first emptied it and rinsed it out with cold water Use only identical replacement parts Do not carry out any maintenance or repair work other than that shown in this manual or advised by the Helpline SAVE THESE INSTRUCTIONS THIS APPLIANCE IS INTENDED FOR HOUSEHOLD USE ONLY Owner s manual Please read this guide carefully before using your DC14 Important safety instructions Assembling your DCO7 Using your DCO7 Using the tools Emptying the clear bin Cleaning the lifetime filter Where to look for blockages Warranty and customer care Page 2 10 12 14 16 suolonaysul Ajojos pjupnpodw suolonaysul Ayajps junpodw suolonaysul Ajojos junpodw Assembling your DC14 Important safety instructions Important safety instructions Box contents AN CAUTION e Please see the back of the manual for optional accessories e f you have any questions please call the Dyson helpline on 1 866 693 9766 or log on to www dyson com Stair tool Brush tool Crevice tool Wand cap Wand Upper cord hook Wand release button On off switch Hose button Cyclone release button
5. carpets and rugs Items not approved by British Allergy Foundation 81D ABWIOJSND UOsSkG suoionaysul Apojps jupnpodwj suolonaysul Ajoyos puDjoduyy Warranty and customer care Important safety instructions Important safety instructions 2 year limited warranty Household use Dyson customer care Servicing of double insulated appliances Your Dyson vacuum cleaner is warranted against original defects in material and workmanship for a period of two years from date of purchase when used only for private household purposes and in accordance with the Owner s Manual This warranty provides at no cost to you all labor and parts to place your vacuum cleaner in proper operating condition during the warranty period For further details of the warranty including limitations and exclusions and to register your purchase please refer to the product registration form found in your instruction pack If you have a question about your Dyson vacuum cleaner call the Dyson Helpline at 1 866 693 9766 with your serial number and details of where when you bought the cleaner The serial number can be found on the base of your machine between the wheels Most questions can be solved over the phone by one of our Helpline staff If your cleaner needs service call the Dyson Helpline we will discuss with you the options available for service If your machine is under warranty your machine will be repaired at no cost To rea
6. NS AND DESIGN APPLICATIONS AU154578 EPO00090865 GB3012888 JP2003 34801 US29 193 623 GB3015739 Please note Small details may vary from those shown 16
7. Owner s manual Please read this guide carefully before using your DC14 Important safety instructions IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER When using an electrical appliance basic precautions should always be followed including the following WARNING TO REDUCE THE RISK OF FIRE ELECTRIC SHOCK OR INJURY Do not leave plugged in Unplug from electrical outlet when not in use and before servicing Do not use outdoors or on wet surfaces or to vacuum water or other liquids electric shock and personal injury could occur Do not allow to be used as a toy Close attention is necessary when used by or near children You are responsible for making sure that your vacuum cleaner is not used by anyone unable to operate it properly Use only as described in this manual Use only with Dyson recommended or approved attachments and accessories Check to ensure your electricity supply corresponds to that shown on the rating plate which can be found on the base of the machine between the wheels The machine must only be used as rated Do not use with a damaged cord or plug If the machine is not functioning properly has been dropped damaged left outdoors or immersed in liquid contact the Dyson Helpline on 1 866 693 9766 Do not pull or carry by the cord do not use the cord as a handle do not close a door on the cord or pull the cord around sharp edges or co
8. S OO pLDq ANOA Buisz suolonaysul Ajojos jupnpodw suo onaysul Ajojos pjunpodw Emptying the clear bin Important safety instructions Important safety instructions Emptying the clear bin AX CAUTION e Turn power off and unplug before emptying the bin Failure to do so could result in electric shock or personal injury e Do not use the machine without the clear bin in place The British Allergy Foundation considers that this product may in proper use reduce exposure to both House Dust Mite Der p 1 and Cot Allergen Fel d 1 It is strongly recommended that a sensitive person should take care when emptying the clear bin We recommend the manufacturers emptying instructions should be strictly followed Assessment carried out by BAF indicate that an individual s exposure can be reduced but this does not mean that an individual s allergic symptoms will necessarily diminish BAF s opinion applies only to the products and allergen stated The product should be used only for its intended purpose and strictly in accordance with the manufacturers instructions at all times Exposure to allergens can be dangerous If you believe that you may suffer from an allergy you should seek medical advice The British Allergy Foundation is a national charity Charity Reg No 1003726 founded in 1991 with the aim of improving awareness prevention and treatment of allergy The Founda
9. ained Helpline staff If your cleaner needs further attention we aim to have it repaired and tested within 3 working days Your serial number can be found on your rating plate which is underneath the machine beneath the wheels Note your serial number for future reference DC14 accessories The items can be used with your DC1A4 For further information visit the Dyson website www dyson com Mini Turbine Head Improved Turbine head removes dirt from upholstery and stairs LE E Flexi crevice tool Extends and flexes to clean awkward gaps Bare floor tool Long bristled tool prevents damage to delicate floors Low reach clean air Turbine head Powertully cleans hard to reach places including Ex EE E wo To replace your filter while it is being washed so you are never without your Dyson Dusting tool Keeps fans blinds TVs and keyboards dust free Mattress cleaning tool Picks up dust from your mattress comforter and cushions 15 Cleaning Pack 1 Groomer Long bristles work zorb carpet maintenance powder deep into carpets 2 Zorb carpet maintenance 750g Millions of tiny sponges absorb dirt from the carpet to keep new carpets looking new with none of the drawbacks of wet cleaning 3 Dyzolv spot cleaner 230ml Contains 4 active agents to clean spots and spills e g grease food drinks and soil Ideal for wool and stain resistant
10. bin A Hold the carry handle and place the cyclone into the clear bin B Line up the catches and push down to click in to place Ensure the clear bin is secure before replacing on the machine uq 109 9 ayy Buluns D suolonaysul Ajojps junpodw suolonaysul Apojos jupnpodw every 6 months Washing the filter at least Important safety instructions Important safety instructions Washing the filter at least every 6 months AX CAUTION e Filter must be washed every 6 months according to instructions to maintain performance e Turn power off and unplug before checking for blockages Failure to do so could result in electric shock or personal injury e Do not use detergent to clean filter e Do not put the filter in the dishwasher washing machine oven tumble dryer microwave or near an open flame MK The filter may require washing more frequently than 6 months based on individual vacuuming habits Press cyclone release button A to release cyclone pack Accessing the filter Lift washable lifetime filter release button B and remove filter from machine 10 Washing the filter e Wash filter and case in cold water only e Only wash blue foam and yellow cage e Do not use detergent e Do not put the filter in the dishwasher washing machine oven tumble dryer microwave or near an open flame Wash filter and case until water runs clear
11. ch the Dyson Helpline call at 1 866 693 9766 or visit Dyson online at www dyson com A double insulated appliance is marked with one or more of the following The words DOUBLE INSULATION or DOUBLE INSULATED or the double insulation symbol square within a square m In a double insulated appliance two systems of insulation are provided instead of grounding No grounding means is provided on a double insulated appliance nor should a means for grounding be added to the appliance Servicing a double insulated appliance requires extreme care and knowledge of the system and should be done only by qualified service personnel Replacement parts for a double insulated appliance must be identical to the parts they replace This product is protected by the following intellectual property rights Patent Patent Application numbers US10 468 870 JP2002 567124 EP1361812 AU2002 567124 GB2393383 PCT GB2003 004058 PCT GB2003 003928 AU744408 EP1119282 JP2000 575411 US6 519 807 AU2002231965 EP1361813 JP2002 567126 US10 468 653 AU744362 EP1121043 JP2000 575409 US6 572 078 AU757043 EP1052923 JP2000 523902 US6 691 849 GBO0326102 1 AU2002 226556 EP1370172 JP2002 567120 US10 468 676 AU2002 225207 EP1361814 JP2002 567129 AU2001 240894 EP1268076 GB2360719 JP2001 572220 US10 239 426 AU2002 225232 EP1361815 GB2372435 JP2002 567134 US10 468 304 GB2372436 AU637 272 EP0636338 JP1 948 863 US5 078 761 REGISTERED DESIG
12. e carrying e Keep hair and loose fabrics away trom wand cap when machine is on e Use machine in Bare Floor mode on fine or delicate carpets e Ensure the machine is in an upright position before adjusting the setting After plugging machine into mains press on off button 1 push cleaner head down with foot and pull handle towards you Use the carry handle to lift the machine Tools A Push back wand cap B Pull wand from inside wand handle until it locks into place C Press button to release hose and wand handle from machine D To push wand back inside hose ensure hose is straight Press the wand release button and push wand back inside wand handle Using your DC14 tools AN CAUTION e Powerful suction can cause the hose to pull back in use please take care when cleaning stairs e For your safety when the hose is fully extended grasp firmly by the hose not the tool e To avoid personal injury and to prevent the machine from falling when cleaning stairs always place it at the bottom of the stairs A Tools can be fitted directly to the end of the wand and hose for cleaning hard to reach places B To fit tools directly to hose first extend the wand Then press side buttons to remove wand handle from the hose C The tools can be fitted directly to the end of the hose Always work with the machine at the bottom of the stairs
13. rners Do not run the machine over the cord Keep the cord away from heated surfaces and open flames Do not unplug by pulling on the cord To unplug grasp the plug not the cord Hold plug when rewinding onto cord reel Do not allow plug to whip when rewinding Do not handle the plug or machine with wet hands Do not use the machine without the clear bin and the filters in place 13 14 15 16 17 18 19 20 21 22 23 24 Do not put any objects into openings in the machine Do not use with any opening blocked keep free of dust lint hair and anything that may reduce air flow Keep hair loose clothing fingers and all parts of body away from openings in the machine and moving parts such as the brushbar Do not use the machine to pick up sharp hard objects small toys pins paper clips etc because they may damage the machine The use of an extension cord is not recommended Store the machine indoors Put the machine away after use with the cord coiled safely to prevent tripping accidents Turn off all controls before unplugging Take extra care when cleaning on stairs always work with the machine at the bottom of the stairs Do not put the machine on chairs tables etc keep it on the floor Do not pick up anything that is burning or smoking such as cigarettes matches or hot ashes Do not use to pick up flammable or combustible liquids such as gasoline or use in areas where they may
14. s and not associated with the main supply To minimise any effect from this do not put your hand or insert any object in to the clear bin unless you have emptied it and Dyson customer care AX CAUTION rinsed it out with cold water Do not use the vacuum cleaner if any parts appear to be faulty missing or damaged Do not carry out any maintenance work other than that shown in this manual or advised by the Helpline and do not put anything in to the openings or moving parts of the machine Only use parts recommended by Dyson failure to do so could invalidate your warranty European conformity information A sample of this product has been tested and found to be in conformity with the following European Directives 73 23 EEC Low voltage safety Directive 93 68 EEC CE Marking Directive 89 336 EEC EMC Directive 14 Do not pull Do not place on the cord on stairs above you Do not put Do not use your hands near open near the flame brushbar when in use Do not leave Do not pick cleaner near up water or heat sources liquids Do not run Do not pick over the cord up burning objects Dyson Customer Care Every new Dyson vacuum cleaner has a 2 year limited warranty If you have a question about your Dyson call the Dyson Customer Helpline with your serial number and details of where when you bought the cleaner Most question can be solved over the phone by one of our tr
15. soleplate is fitted correctly when replacing se6p 0 q Hulpuly suolonaysul Ajojos junpodw suo onaysul Ajojos junpodw Changing fitting the belt Important safety instructions Important safety instructions Changing fitting the belt CAUTION e Turn power off unplug machine and allow machine to cool for 1 hour before changing fitting belt Failure to do so could result in electric shock or personal injury e Ensure soleplate is in correct position before use e Make sure all parts have been replaced securely before using your machine p r i Remove wand and turn machine upside down A Undo fasteners using a coin slide back end caps and remove soleplate 12 B Remove dirt or debris and C To replace the belt check spindle is clean remove the brushbar loop belt around brushbar and feed through hole D Check end caps are in place Changing fitting the belt A CAUTION e Ensure soleplate is in correct position before USE E Use back of cleaner as lever loop belt around thumb Turn the belt 90 degrees stretch and release over spindle Belt must be free of twists as shown F Rest the three tabs on inside of yellow bumper strip and secure soleplate back into position G Ensure soleplate is in correct position before use 13 Optional maintaining the Upholstery tool Optional Upholstery tool
16. tion continually strives to help sufferers to help themselves often seeking to avoid or reduce exposure to relevant allergens The Seal of Approval scheme forms a part of this initiative 16 Empty the clear bin as soon as the MAX mark is reached Press cyclone release button to release cyclone from machine Option A Push the red bin emptying button as shown to release the bin base and empty directly into trash Option B D Emptying in a bag is recommended for allergy sufferers Place bin in bag and push red bin emptying button to release bin base Let the dust settle close D bin base securely before A removing from bag Close bin base securely and place back onto machine Cleaning the Clear bin A CAUTION e Do not use detergents polishes or air fresheners to clean the clear bin e Do not immerse the cleaner in water e Ensure the bin is completely dry before refitting Cleaning the shroud if necessary Ensure the bin has been emptied and bin base is open Press catch A to release clear bin Clean shroud with a cloth or small brush to remove lint or debris Cleaning the clear bin Clean clear bin with a cloth or small brush e Do not use detergents polishes or air fresheners Do not immerse the cleaner in water e Ensure the bin is completely dry before refitting a es T ms Replacing the

Download Pdf Manuals

image

Related Search

Related Contents

自立型車椅子ロボットによる障害物回避および壁沿い行動の実現  Model DTA4000 User Manual  FmX Integrated Display with the EZ-Pilot  Fujitsu Windows Server 2012 Essentials ROK  Series 2200 Multichannel Programmable DC Power Supplies User  Swingline Peel-N-Stick  Manual N° 3192  Electro-Sentry 16 Operating Manual - Electro  MICROgarde l and ll Installation Instructions  “v97”entree reglable de 50 a 80 mm.  

Copyright © All rights reserved.
Failed to retrieve file