Crosley Radio CR44CD Stereo System User Manual
Contents
1. a few seconds while reading CD information then the total number of tracks on the disc will be displayed 00 will be shown when there is no disc inside the unit Press the PLAY PAUSE BUTTON 8 to start playback The PLAY PAUSE INDICATOR 9 will light up Adjust the VOLUME KNOB 1 to the desired volume level To pause playback press the PLAY PAUSE BUTTON 8 The PLAY PAUSE INDICATOR 9 will flash Press the PLAY PAUSE BUTTON 8 again to resume playback To stop playback press the STOP BUTTON 10 and the PLAY PAUSE INDICATOR 9 will go off SKIP FORWARD AND SKIP REVERSE 1 Press the FORWARD SKIP BUTTON 18 or the BACKWARD SKIP BUTTON 17 to select a track 2 Press the PLAY PAUSE BUTTON 8 to start playing the selected track On Aw N N ant LOCATION OF PARTS Z estase RK SRB RES R ORR KKK 0 RK KS veg SKS ces 9 tas RZ racers 5 S a ates 1 Volume Knob 17 Backward Skip Button 2 Tuner Dial 18 Forward Skip Button 3 Tuning Knob 19 AM FM Button 4 Function Switch 20 Speaker 5 Power Indicator 21 Spindle 6 Power Button 22 Turntable 7 Open Close Button 23 Adapter For 45 rom Records 8 Play Pause Button 24 Tone Arm 9 Play Pause Indicator 25 Speed Control Switch 10 Stop Button 26 Tone Arm Rest 11 CD Drawer 27 Line Out Jack 12 LED Display 28 Speaker Int Ext Switch 13 Repeat Indicator 29 External Speaker2. safety and operating instructions should be read before the product is operated Retain instructions The safety and operating instructions should be retained for future reference Heed Warnings All warnings on the product and in the operating Instructions should be adhered to Follow Instructions All operating and use instructions should be followed Cleaning Unplug this product from the wall outlet before cleaning Do not use liquid cleaners or aerosol cleaners Use a damp cloth for cleaning Attachments Do not use attachments not recommended by the product manufacturer as they may cause hazards Water and Moisture Do not use this product near water for example near a bath tub wash bowl kitchen sink or laundry tub in a wet basement or near a swimming pool and the like A product and cart combination should be moved with care Quick stops excessive force and uneven surfaces may cause the product and cart combination to overturn Ventilation Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating and these openings must not be blocked or covered The openings should never be blocked by placing the product on a bed sofa rug or other similar surface This product should not be placed in a built in installation such as a bookcase A or rack unless proper ventilation is provided or the manufacturer s instructions have been adher
3. ING Remove packing materials from unit Note Save all packing materials Remove plastic bag covering radio Remove plastic safety cover trom A C plug Remove tie from A C cord Open lid and remove styrofoam shipping material from turntable Remove black tie wrap from under the tone arm Remove white protective needle cover by gently pulling towards the front of the unit Untie the FM antenna and allow it to hang down in a straight line for optimum FM reception If you have trouble tuning in an FM station move the external FM antenna for best reception Do not connect FM antenna to outside antenna CONAMBRWN POWER SOURCE 1 Unwind the AC POWER CORD 31 at the back of the unit and connect it to a power outlet 2 Plug A C cord into appropriate outlet Polarized Plug 3 This product is equipped with a polarized alternating current line plug a plug having one blade wider than the other This plug will fit into the power outlet only one way This is a safety feature If you are unable to insert the plug fully into the outlet try reversing the plug If the plug should still fail to fit contact you electrician to replace your obsolete outlet Do not defeat the purpose of the polarized plug TURNTABLE OPERATION Turn the unit on by pressing the POWER BUTTON 6 located on the front panel to the ON position Slide the FUNCTION SWITCH 4 to PHONO Set ie REED CONTROL SWITCH 25 to desire speed 33 1 3 45 or 78 rpm Place the record
4. Jack 14 Repeat Button 30 FM Wire Antenna 15 Program Button 31 AC Power Cord 16 Program Indicator 1 2 3 ce Bee fs FII za eee RSS ES Be R e 2 Bes Ee Be Bass e z e Be BSA e 8 fof tia 16 18 wi 7 9 1 143 15 17 19 Ja K E RBA SRK KKK ee 05 Sees 2 2 ces x a x s SS SSS 5 05 KEKKXARSS K RS oe ee RS SEARGH FORWARD AND REVERSE DURING PLAY PLAYBACK 1 Press and hold the FORWARD SKIP BUTTON 18 or the BACKWARD SKIP BUTTON 17 to search forward or backward though the selected track 2 Release the button at the desired point playback will resume automatically REPEAT PLAYBACK 1 To repeat a single track choose the track that you want to repeat then press the PLAY PAUSE BUTTON 8 oan he track Press the REPEAT BUTTON 14 once to repeat this track The REPEAT INDICATOR 13 will flash 2 To repeat all tracks press the PLAY PAUSE BUTTON 8 to start the CD Press the REPEAT BUTTON 14 twice to repeat all tracks Once the CD ends it will star over again from the beginning of the CD The REPEAT INDICATOR 13 will remain on 3 ig srase the repeat function press the REPEAT BUTTON 14 again until the REPEAT INDICATOR 13 is off PROGRAMMED PLAYBACK 1 Press the PROGRAM BUTTON 15 01 will shown on the display and the PROGRAM INDICATOR 16 will flash Press the FORWARD SKIP BUTTON 18 or the BACKWARD SKIP BUTTON 17 to select a
5. WARNING TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE DO NOT REMOVE COVER PILOT LAMPS SOLDERED IN PLACE NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lighting flash with arrowhead symbol within an equilateral triangle is intended to alert user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufticient magnitude to constitute risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert user to the presence of important operating and maintenance servicing instruction in the literature accompanying the appliance SPECIFICATION Frequency Range FM 87 5 108 5 MHz AM 525 1710 KHz Power Source AC 120V 60 HZ Power Consumption 30 W Antennas External FM Antenna Built in Ferrite Am Bar Replacement Needle NP DESIGN AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE YOU RE THERE WITH A CROSLEY 1220 East Oak Street Louisville Kentucky 40204 www crosleyradio com 910 242800 0040 100 IMPORTANT SAFETY INSTRUCTION PLEASE READ CAREFULLY ALL THE FOLLOWING IMPORTANT SAFEGUARDS THAT ARE APPLICABLE TO YOUR EQUIPMENT Read Instructions All the
6. e extensive work by a qualified technician to restore the product to its normal operation e If the product has been dropped or damaged in any way f When the product exhibits a distinct change in performance this indicates a need for service 19 Replacement Parts When replacement parts are required be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part Unauthorized substitutions may result in fire electric shock or other hazards 20 Safety Check Upon completion of any service or repairs to this product ask the service technician to perform safety checks to determine that the product is in proper operating condition 21 Wall or ceiling Mounting The product should be mounted to a wall or ceiling only as recommended by the manufacturer 22 Heat The product should be situated away from heat sources such as radiators Heat registers stoves or other products including amplifiers that produce heat WARNING Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates u
7. ed to 10 Power Sources This product should be operated only from the type of power source indicated on the marking label if you are not sure of the type of power supply to your home Consult your product dealer or local power company For products intended to operate from battery power or other sources refer to the operating instructions Grounding or Polarization This product may be equipped with a polarized alternating current line plug a plug having one blade wider than the other This plug will fit into the power outlet only one way This is a safety feature If you are unable to insert the plug fully into the outlet try reversing the plug If the plug should still fail to fit contact your electrician to replace your obsolete outlet Do not defeat the safety purpose of the polarized plug 12 Power Cord Protection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying particular attention to cords at plugs convenience receptacles and the point where they exit from the product Lightning For added protection for this product during a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the antenna or cable system This will prevent damage to the product due to lightning and power line surges 14 Power Lines An outside antenna system should not be located in the vic
8. inity of overhead power lines or other electric light or power circuits or where it can fall into such power lines or circuits When installing an outside antenna system extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal 15 Overloading Do not overload wall outlets extension cords or integral convenience receptacles as this can result in a risk of fire or electric shock 16 Object and Liquid Entry Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock Never spill liquid of any kind on the product 17 Servicing Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards Refer all servicing to qualified service personnel 18 Damage Requiring Service Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions a When the power supply cord or plug is damaged b If liquid has been spilled or objects have fallen into the product c If the product has been exposed to rain or water d If the product does not operate normally by following the operating instructions Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often requir
9. lugged in correctly 2 Check to see that the power button is pushed in There is no Sound Check the volume level by turning the volume knob 2 Make sure the ext int switch on back of radio is on int unless you are using external speakers in which case it should be on ext Turntable will not work Make sure the function switch is set to phono 2 Try moving the tone arm to the right until you hear a click 3 Make sure the protective needle cover is removed CD does not play Check to make sure CD is inserted correctly label side facing up 2 Check that the surface of the CD is clean 3 Make sure function switch is set to CD Needles are available for additional charges please call us at 1 800 926 7801 www crosleyradio com 21 00000000 t y 000000000 ooooo0000 fg 000000000 28 000000000 p ooo0o0o00000 30 a UA ooo000000 1 7 ooo0o00000 o000000 00 e ame CD OR 90 31 OOD ED eo Gm e e oooo0o0000 oo0000000 oooo00000 oo0000000 oooo0o00000 o000000 00 ooo000000 000000000 oooo00000 000000000
10. n its original packaging Include any adapters parts amp accessories which were originally provided with the product along with a check or money order for 19 95 made out to Crosley Radio to cover the handling and return postage Display the R A on the outside of the carton and ship PREPAID via standard UPS or its equivalent ROSLEY RADO ATTN RETURNS DEP T 2001 PRODUCTION DRIVE BAY 2 amp 3 LOUISVILLE KY 40299 CROSLEY RADIO assumes no responsibility for units sent without prior Return Authorization The purchaser s bill of sale is the only proof of warranty entitlement and must accompany the unit The warranty does not cover damage due to acts of nature accident misuse abuse negligence commercial use or modification of or to any part of the product This warranty does not cover damage due to improper operation or maintenance connection to improper voltage supply or attempted repair by anyone other than a facility authorized by Crosley Radio to service the product This warranty does not cover products sold AS IS or consumables such as fuses or batteries This warranty is valid only in the United States This warranty gives the purchaser specified legal rights in addition to any rights which may vary from state to state In accordance with the Moss Magnuson Warranty Act of July 10 1975 this is termed a limited warranty which in no way compromises Crosley Radio high standards of Quality and Workmanship UNPACK
11. on the turntable Pull the TONE ARM 24 slightly to the right side until hear the click sound to activate the TURNTABLE 22 Move the TONE ARM 24 by hand to the record and slowly lower it to the desired starting point Turn the VOLUME KNOB 1 to adjust the volume to the desired level At the end of the record the TONE ARM 24 will stop automatically You must return the TONE ARM 24 to TONE ARM REST 26 by hand ACCESSORY ADAPTER FOR 45 RPM To play the 45rpm record place the ADAPTER 23 on the spindle RADIO OPERATION 1 Slide the FUNCTION SWITCH 4 to RADIO 2 Press the AM FM BUTTON 19 to the select the desired tuning band 3 Select the desired radio station by rotating the TUNING KNOB 3 4 Adjust the VOLUME KNOB 1 to the desired sound level ANTENNA Antenna for FM reception the unit is provided with a FM WIRE ANTENNA 30 move the wire until the reception is clear and with no interferences For AM reception the unit is provided with a directional build in ferrite antenna Rotate the set to find the position in which the best reception is obtained Do not connect the FM WIRE ANTENNA 30 to any outside antenna CD OPERATION Playing a CD 1 Slide the FUNCTION SWITCH 4 to CD 2 Press the OPEN CLOSE BUTTON 7 to open the CD DRAWER 11 Place a disc in the tray with the labeled side of the disc facing up 3 Press the OPEN CLOSE BUTTON 7 again to close the CD DRAWER 11 The display will show for
12. ses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful intereference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help o ND PYN 1 1 w 12 9 07 HiT Turntable Console With CD Player WARRANTY Crosley Radio Products are warranted against defects in material and workmanship for a period of 90 days beginning from the date of sale to the original purchaser Should the unit fail under normal usage during the 90 day warranty period a request for RETURN AUTHORIZATION R A must be made by the original customer before returning the unit Call Crosley Radio customer service for Return Authorization at 502 583 4246 from 9 AM to 5 PM EST Monday to Friday Upon receiving the RETURN AUTHORIZATION number from the Customer Service Department properly pack your unit i
13. track Press the PROGRAM BUTTON 15 again to store the selected track number Repeat steps 2 and 3 above to program other tracks Press the PLAY PAUSE BUTTON 8 to start programmed playback The PROGRAM INDICATOR 16 will be on To erase the programmed sequence press the STOP BUTTON 10 twice or until the PROGRAM INDICATOR 16 is off Programmed tracks will also erase when the CD DRAWER 11 is opened oa OORUN NOTE Maximum of 20 tracks can be programmed to play in any order EXTERNAL SPEAKER 1 This radio is equipped with external speaker outputs 2 The speaker jacks for external speakers are located on the back of the radio Beside the speaker jacks is a switch labeled int ext When using external speakers this switch must be switched to the ext position Doing this turns off the internal speakers in the radio and redirects to power to the external speakers 3 If ay decide not to use the external speakers be sure the switch is on int or the internal speakers will not work AUXILIARY OUTPUTS 1 You can connect your radio to different sources using the auxiliary outputs 2 Connect auxiliary cables to the LINE OUT JACK 27 to the auxiliary inputs on the desired component See the owner s manual for the operating instructions on the desired component The LINE OUT JACK 27 only meso Hooking up external speakers alone must be hooked up using the EXTERNAL SPEAKER TROUBLESHOOTING There is no Power Make sure the radio is p
Download Pdf Manuals
Related Search