Casio 3345 Watch User Manual
Contents
1. to display FT before advancing to the next step e The second hand will move at high speed to the 12 o clock position where it will stop Press to display the city code setting screen Use east and west to select the city code you want to use as your Home City The following are the city codes for major cities in the Western Europe time zones t Paris Berlin Milan Rome City code Amsterdam Hamburg Frankfurt Vienna 4 Press twice to exit the setting screen e The first press of displays the 12 24 hour setting screen Pressing again exits the setting screen e The second hand will advance at high speed to the correct position in accordance with seconds count of the digital time and resume normal movement from there e Normally your watch should show the correct time as soon as you select your Home City Code If it does not it should adjust automatically after the next auto receive in the middle of the night You can also perform manual receive or you can set the time manually e If you are in an area that does not use Daylight Saving Time summer time turn off the DST setting e See Transmitters for details about the transmitter indicator CASIO About This Manual e Button operations are indicated using the letters shown in the illustration e Each section of this manual provides you with the information you need to perform operations in each mode Further details and technical in2. which indicates the setting screen Owon arame e The second hand will move at high speed to the 12 o clock position where it will stop 2 Press three times to move the flashing to the auto receive on off setting 3 Press to toggle auto receive on t4 and off mF e If the current Home City setting is a city code thai does not support auto receive appears in place of the on off indicator This means you cannot turn auto receive on or off 4 Press twice to exit the setting screen e The second hand will advance at high speed to the correct position in accordance with the digital time seconds count and resume normal movement from there e For information about city codes that support signal reception see To set your Home City Signal Reception Troubleshooting Check the following points whenever you experience problems with signal reception Problem Probable Cause What you should do Cannot The watch is not in the Timekeeping e Enter the Timekeeping Mode and perform Mode try again manual e Your current Home City is not one of e Select BER PAR or LON as your receive the following city codes BER PAR or Home City LON e Select the appropriate transmitter setting for your current location Auto receive is e You changed the time setting e Select the appropriate transmitter turned on but manually setting for your current location the Level 4 e The watch was not in the Timekeeping e Perform manual re
3. 500 lux 76 hours ae e The above exposure time values are all for reference only Actual required exposure times depend on lighting conditions Timekeeping Use the Timekeeping Mode to set and view the current time and date This section also explains how to manually set the current date and time e When setting the time you can also configure settings for the illumination duration the 12 24 hour format and power saving on off e All of the operations in this section are performed in the Timekeeping Mode which you can enter by pressing Date gia Receiving T Receving m Indicator and Nn _ iN Press Seconds Count 4 20 oLD TIME ALN os I seconds Eso am ve F o CurrentTime P L Hour Screen 1 O 0 Minutes Press PM indicator Day of week Reception date 5 30 2 seconds Last Signal Screen Li 0 ay Reception Time 2 seconds Setting the Digital Time and Date Manually Make sure you select your Home City code before you change the current time and date settings World Time Mode times are all displayed in accordance with the Timekeeping Mode settings Because of this World Time Mode times will not be correct if you do not select the proper Home City code before setting the time and date in the Timekeeping Mode 2 seconds To set the current digital time and date manually 1 In the Timekeeping Mode hold down until the transmitter indicator starts to flash which indicates t
4. cell e The illustration shows how to position a watch with a resin band e Note that charging efficiency drops when any part of the solar cell is blocked by clothing etc e Normally you should try to keep the watch outside of your sleeve as much as possible Charging is significantly reduced if the face is only partially covered Important e Storing the watch for long periods in an area where there is no light or wearing it in such a way that it is blocked from exposure to light can cause rechargeable battery power to run down Make sure that the watch is normally exposed to bright light whenever possible e Normally the rechargeable battery should not need replacement but after very long use over a number of years the rechargeable battery may lose its ability to achieve a full charge Should you notice problems with getting the rechargeable battery to a full charge contact your dealer or CASIO distributor about having it replaced e The rechargeable battery should be replaced with a CASIO specified CTL1616 battery only Other rechargeable batteries can cause damage to the watch e All data stored in memory is deleted and the current time and all other settings return to their initial factory defaults whenever battery level drops to Level 4 and when you have the battery replaced e Turn on the watch s Power Saving function and keep it in an area normally exposed to bright light when storing it for long periods This helps to keep
5. displayed press once e The second hand will advance at high speed to the correct position in accordance with the digital time seconds count and resume normal movement from there e When you exit the setting screen the analog hands are adjusted automatically to match the digital time See Analog Timekeeping for more information Note e See Transmitters for more information e Auto DST f can be selected only while E PF LS ori TH is selected as the Home City code For more information see Daylight Saving Time DST below The auto receive setting is used for time calibration signal reception only See About Auto Receive for details Daylight Saving Time DST Daylight Saving Time summer time advances the time setting by one hour from Standard Time Remember that not all countries or even local areas use Daylight Saving Time The time calibration signals transmitted from Rugby and Mainflingen includes both Standard Time and DST data When the Auto DST setting is turned on the watch switches between Standard Time and DST summer time automatically in accordance with the received time signal e The default DST setting is Auto DST Ft whenever you select E orFiTH as your Home City code e If you experience problems receiving the time calibration signal in your area it is probably best to switch between Standard Time and Daylight Saving Time summer time manually To change the Daylight Saving Time summer t
6. experience problems with time calibration signal reception About Auto Receive When auto receive is turned on the watch automatically starts to receive the time calibration signal when the time in the Timekeeping Mode reaches 0 00 a m 1 00 a m 2 00 a m 3 00 a m and 4 00 a m each day calibration times The watch will also perform an additional auto receive at 5 00 a m if none of the regularly scheduled auto receive are successful Note Auto receive is performed only if the watch is in the Timekeeping Mode or World Time Mode when one of the calibration times is reached It is not performed if a calibration time is reached while an alarm is sounding or while you are configuring settings while settings are flashing on the display e When a reception starts the second hand will move at high speed to the 12 o clock position where it will stop until the reception is complete e Auto receipt of the calibration signal is designed to be performed early in the morning while you sleep provided that the Timekeeping Mode time is set correctly Before going to bed for the night remove the watch from your wrist and put it in a location where it can easily receive the signal e When auto receive is turned on the watch receives the calibration signal for two to seven minutes everyday when the time in the Timekeeping Mode reaches each of the five calibration times Do not perform any button operation within seven minutes before or after any
7. flashing use and to change it e When setting the alarm time using the 12 hour format take care to set the time correctly as a m no indicator or p m P indicator e If you have 24 hour timekeeping selected in the Timekeeping Mode the alarm time is also displayed in 24 hour format 5 Press to exit the setting screen Alarm Operation The alarm sounds in all modes at the preset time for about 10 seconds or until you stop it by pressing any button To test the alarm In the Alarm Mode hold down to sound the alarm To turn an alarm and the Hourly Time Signal on and off 1 In the Alarm Mode press to select an alarm or the Hourly Time Signal 2 When the alarm or the Hourly Time Signal you want to set is selected press to turn it on and off Stopwatch 1 100 The stopwatch lets you measure elapsed time split times Seconds second and two finishes e The display range of the stopwatch is 99 minutes 59 99 seconds e The 1 100 second value appears while the elapsed time operation is stopped or while a split time is frozen on the display Elapsed Time Screen WORLD TIME ALN DST More than 1 100 second Elapsed time f one minute Minutes Seconds OG 14 lt 4 E Split Time Screen Split time Split indicator Minutes Seconds 1 100 second P PLAU 0 e The stopwatch continues to run restarting from zero after it reaches its limit until you stop it e Exiting the Stopwatch Mode wh
8. of the five calibration times Doing so can interfere with correct calibration e Remember that reception of the calibration signal depends on the time kept in the digital display The reception will be performed whenever the display shows one of the five calibration times regardless of whether or not the displayed time is actually the correct time e When two three four or five receptions are successful the watch uses the data of the last reception for calibration When only one reception is successful the watch uses the data of the successful reception About the Receiving Indicator The receiving indicator shows the strength of the calibration signal being received For best reception be sure to keep the watch in a location where signal strength is strongest Receiving indicator JAA TIME ALM pst O Ca 4 Weak Strong Level 1 Level 4 e Even in an area where signal strength is strong it takes about 10 seconds for signal reception to stabilize enough for the receiving indicator to indicate signal strength Use the receiving indicator as a guide for checking signal strength and for finding the best location for the watch during signal reception e The Level 4 receiving indicator appears on the Timekeeping Mode s Receiving Indicator and Seconds Count screen only The Level 4 receiving indicator is not displayed if signal reception was unsuccessful or after manual adjustment of the current time setting e The Leve
9. or you can configure the watch to automatically select the transmitter that has the strongest signal The following explains how the watch determines which transmitter it should check first while the watch is configured for auto transmitter search AT Module 3309 Approximate Period Functions in sleep state 3 to 4 days e LCD off e Alarm hourly time signal analog timekeeping and auto receive enabled 8 days or more e LCD off alarm and hourly time signal disabled e Analog timekeeping stopped at 12 o clock Auto receive disabled In this case The watch does this The first signal auto search operation 1 Checks the Rugby signal first after factory default settings are in effect 2 If the Rugby signal cannot be received or after the city code has been changed checks the Mainflingen signal Any case other than the above 1 Checks the last successfully received signal first 2 If the last successfully received signal cannot be received checks the other signal The sleep state is indicated by a blank screen with the Power Saving indicator Ps flashing on it e Wearing the watch inside the sleeve of clothing can cause it to enter the sleep state To recover from the sleep state Perform any one of the following operations e Move the watch to a well lit area e Press any button To turn Power Saving on and off In the Timekeeping Mode hold down until the transmitter indicator
10. the rechargeable battery from going dead To check the current battery level In the Timekeeping Mode press once to display the battery level indicator The battery level indicator shows the battery level either as HI Level 1 or MID Level 2 e If the battery level drops below Level 2 MID a charge soon alert Level 3 is displayed in all modes Battery level indicator WOF LD TIME _ALM_DST N m HI No C Mb Function Status Battery Level Indicator All functions enabled All functions enabled Auto and manual receive alarm hourly time signal illumination and display are disabled Though the hands of the watch do not move time Charge Soon Alert continues to be kept internally 4 All functions including timekeeping disabled e The flashing charge indicator at Level 3 tells you that battery power is very low and that exposure to bright light for charging is required as soon as possible e At Level 4 all functions are disabled and settings return to their initial factory defaults Functions are enabled once again after the rechargeable battery is charged but you need to set the time and date after the battery reaches Level 2 from Level 4 e Leaving the watch in direct sunlight or some other very strong light source can cause the battery level indicator to temporarily show a reading that is higher than the actual battery level The correct battery level indi
11. IO To select a transmitter 1 In the Timekeeping Mode hold down until the transmitter indicator starts to flash which indicates the setting screen e The second hand will move at high speed to the 12 o clock position where it will stop 2 Use to scroll through available transmitter settings until the one you want to select is displayed Transmitter indicator To set up the watch to do this Select this transmitter setting Automatically select the Rugby or Mainflingen signal AT Receive the Mainflingen signal DCF Receive the Rugby signal HEF e Note that appears in place of the transmitter indicator when any city code besides LS FAR EER or Fi TH is selected as the Home City code This indicates that you cannot specify a transmitter 3 Press twice to exit the setting screen e Reception can take up to 14 minutes when the FX T option is selected e The second hand will advance at high speed to the correct position in accordance with seconds count of the digital time and resume normal movement from there Timekeeping e Resetting the seconds to 00 while the current count is in the range of 30 to 59 causes the minutes to be increased by 1 In the range of 00 to 29 the seconds are reset to 00 without changing the minutes e The day of the week is automatically displayed in accordance with the date year month and day settings e The year can be set in the range of 2000 to 2099 The wa
12. Operation Guide 3309 3345 Getting Acquainted Congratulations upon your selection of this CASIO watch To get the most out of your purchase be sure to carefully read this manual and keep it on hand for later reference when necessary Expose the watch to bright light to charge its battery before using it You can use this watch even as its battery is being charged by exposure to bright light e Be sure to read Battery of this manual for important information you need to know when exposing the watch to bright light If the digital display of the watch is blank If the Power Saving indicator 3 is flashing on the display it means that the display is blank because the watch s Power Saving function has turned it off to conserve power Power Saving automatically turns off the display and enters a sleep state whenever your watch is left for a certain period in an area where it is dark If the watch is kept in the dark for a longer period the analog hands will also stop moving after a few days e The initial factory default setting is Power Saving on e The watch will recover from the sleep state if you move it to a well lit area or if you press any button e See Power Saving Function for more information General Guide e Press to change from mode to mode e In any mode press to illuminate the display Timekeeping Mode Hand Setting Mode eee Radio controlled Timekeeping This watch recei
13. ally turns off whenever an alarm sounds e Frequent use of illumination shortens the battery operating time City Code Table Gatle City ci nial Other major cities in same time zone 11 0 Pago Pago HNL Honolulu 10 0 Papeete ANC Anchorage 09 0 Nome v y an Francisco Las Vegas Vancouver LAX Los Angeles 08 0 Seattle Tacoma Dawson City DEN Denver 07 0 El Paso Edmonton z Houston Dallas Ft Worth CHI Chicago 06 0 New Orleans Mexico City Winnipeg Montreal Detroit Miami Boston NYC New York 05 0 Panama City Havana Lima Bogota CCS Caracas 04 0 La Paz Santiago Pt Of Spain RIO Rio De Janeiro 03 0 Sao Paulo Buenos Aires Brasilia Montevideo 02 0 01 0 Praia GMT Dublin Lisbon Casablanca Dakar Abidjan LON London 00 0 PAR Paris Milan Rome Madrid Amsterdam Algiers Hamburg BER Berlin 01 0 Frankfurt Vienna Stockholm ATH Athens Helsinki Istanbul Beirut Damascus CAI Cairo 02 0 Cape Town JRS Jerusalem JED Jeddah 03 0 Kuwait Riyadh Aden Addis Ababa Nairobi Moscow THR Tehran 03 5 Shiraz DXB Dubai 04 0 Abu Dhabi Muscat KBL Kabul 04 5 KHI Karachi 05 0 Male DEL Delhi 05 5 Mumbai Kolkata DAC Dhaka 06 0 Colombo RGN Yangon 06 5 BKK Bangkok 07 0 Jakarta Phnom Penh Hanoi Vientiane HKG Hong Kong 08 0 ganora Kuala Lumpur Beijing Taipei Manila Perth SEL Seoul Pyongyang TYO Tokyo 08 0 ADL Adelaide 09 5 Darwin SYD Sydney 10 0 Melbourne Guam Rabaul NOU Noumea 11 0 Pt V
14. alog time 1 In the Timekeeping Mode press five times to enter the Hand Setting Mode 2 Hold down until D starts to flash which indicates the setting screen e The second hand will move at high speed to the 12 o clock position where it will stop 3 If the second hand is not pointing precisely at 12 o clock at this time use to adjust its position Each press of causes the second hand to advance by one second 4 Press This will cause the time on the digital display to flash which indicates that adjustment of hour and minute hands is selected 5 Use and to adjust the analog setting as described below When you want to do this Perform this button operation Move the hand setting e Press forward 20 seconds Move the hand setting back Press 20 seconds Move the hand setting a short e Hold down way forward at high speed e Release when the hands reach the setting you want Move the hand setting a e Hold down short way back at high speed e Release 8 when the hands reach the setting you want Move the hand setting a e While holding down to move the hands at long way forward at high high speed press to lock the high speed speed hand movement e To stop the hand movement press any button e Hand movement stops automatically if the hour hand makes one full 12 hour revolution Move the hand setting a long While holding down to move the hands at way
15. amount of time the watch needs to be exposed to light each day in order to generate enough power for normal daily operations Exposure Level Brightness Approximate Exposure Time Outdoor Sunlight 50 000 lux 5 minutes Sunlight Through a Window 10 000 lux 24 minutes 3 When the setting you want to change is flashing use and or to change it as described below Transmitter City Settings Screen To do this Do this Change the transmitter setting AT MEF orlalF Use Daylight Through a Window on a Cloudy Day 48 minutes 5 000 lux Change the city code Use east and west CASIO Indoor Fluorescent Lighting 500 lux 8 hours e Since these are the specs we can include all the technical details e 1 illumination operation 1 5 seconds per day e 10 seconds of alarm operation per day e 5 times calibration reception per day e Stable operation is promoted by frequent charging Recovery Times The table below shows the amount exposure that is required to take the battery from one level to the next Exposure Level Approximate Exposure Time Brightness Level 4 Level 3 Level 2 Level 1 Outdoor Sunlight 50 000 lux 1 hour 10 hours 5 hours Sunlight Through a Window 10 000 lux 22 hours 4 hours 48 hours Daylight Through a Window on a Cloudy Day 5 000 lux 46 hours 8 hours 99 hours Indoor Fluorescent Lighting
16. back at high speed high speed press to lock the high speed hand movement e To stop the hand movement press any button e Hand movement stops automatically if the hour hand makes one full 12 hour revolution 6 Press to exit the setting screen e The minute hand will be adjusted slightly to match the seconds when you exit the setting screen e To return to the Timekeeping Mode press Reference This section contains more detailed and technical information about watch operation It also contains important precautions and notes about the various features and functions of this watch Power Saving Function When turned on the Power Saving function automatically enters a sleep state whenever the watch is left in an area where lighting is dim less than about 30 lux The following shows how watch functions are affected when left in a dark place while in the sleep state Power Saving indicator CASIO Auto Return Features e If you leave the watch in the Alarm or Hand Setting Mode or with the Battery Level Indicator HI or MID displayed for two or three minutes without performing any operation it automatically returns to the Timekeeping Mode e If you leave the watch with a flashing setting on the display for two or three minutes without performing any operation the watch automatically exits the setting screen Scrolling The and buttons are used in various modes and setting scr
17. bration signal cannot be performed starting from January 1 2100 e This watch can receive signals that differentiate between leap years and non leap years e Though this watch is designed to receive both time data hour minutes seconds and date data year month day certain signal conditions can limit reception to time data only e Normally the signal reception date shown by the last signal screen is the date data included in the received time calibration signal When only time data is received however the last signal screen shows the date as kept in the Timekeeping Mode at the time of signal reception e If you are in an area where proper time calibration signal reception is impossible the watch keeps time within 15 seconds a month at normal temperature e If you have problems with proper time calibration signal reception or if the time setting is wrong after signal reception check your transmitter current city code DST summer time and auto receive settings The following are the initial factory defaults for these settings Setting Initial Factory Default Transmitter ba City code London Module 3309 DST summer time Auto switching F Berlin Module 3345 Auto receive RC OH Auto receive Transmitters This watch is designed to receive the time calibration signal transmitted from Rugby England and the signal from Mainflingen Germany You can select either one of the transmitters
18. cator should appear after a few minutes e If you use the light or alarms a number of times during a short period the recover indicator F appears on the display and the following operations become disabled until battery power recovers Illumination Beeper tone Coordination between digital and analog timekeeping Time calibration signal reception Recover indicator After some time battery power will recover and the recover indicator will disappear indicating that the above functions are enabled again Charging Precautions Certain charging conditions can cause the watch to become very hot Avoid leaving the watch in the areas described below whenever charging its rechargeable battery Also note that allowing the watch to become very hot can cause its liquid crystal display to black out The appearance of the LCD should become normal again when the watch returns to a lower temperature Warning Leaving the watch in bright light to charge its rechargeable battery can cause it to become quite hot Take care when handling the watch to avoid burn injury The watch can become particularly hot when exposed to the following conditions for long periods e On the dashboard of a car parked in direct sunlight Too close to an incandescent lamp e Under direct sunlight Operation Guide 3309 3345 Charging Guide After a full charge timekeeping remains enabled for up to about 5 months e The following table shows the
19. ceive or wait receiving or World Time Mode or you were until the next auto receive is indicator does performing some button operation performed not appear on during auto receive e Check to make sure the watch is the e Even if reception is successful the in a location where it can receive Timekeeping Level 4 receiving indicator the signal Mode display disappears every day at 3 a m Time data hour minutes seconds only was received during the last reception The Level 4 receiving indicator appears only when time data and date data year month day are both received Time setting e If the time is one hour off the DST e Change the DST setting to Auto is incorrect setting may be incorrect DST following e The Home City code setting is not e Select the correct Home City signal correct for the area where you are code reception using the watch e For further information see Important under Time Calibration Signal Reception and Radio controlled Timekeeping Precautions World Time Current time in the selected city code g The World Time Mode digitally displays the current time in City Code 30 cities 29 time zones around the world e Pressing in the World Time Mode causes the i YE applicable city code to appear on the digital display for about two seconds e If the current time shown for a city is wrong check your lp N Home City time settings and make the necessa
20. eens to scroll through data on the display In most cases holding down these buttons during a scroll operation scrolls through the data at high speed Initial Screens When you enter the World Time or Alarm Mode the data you were viewing when you last exited the mode appears first Radio controlled Timekeeping Precautions Strong electrostatic charge can result in the wrong time being set e Even when the watch is within the reception range of the transmitter signal reception will be impossible if the signal is blocked by mountains or other geological formations between the watch and signal source Signal reception is affected by weather atmospheric conditions and seasonal changes The time calibration signal bounces off the ionosphere Because of this such factors as changes in the reflectivity of the ionosphere as well as movement of the ionosphere to higher altitudes due to seasonal atmospheric changes or the time of day may change the reception range of the signal and make reception temporarily impossible e Even if the time calibration signal is received properly certain conditions can cause the time setting to be off by up to one second e The current time setting in accordance with the time calibration signal takes priority over any time settings you make manually e The watch is designed to automatically update the date and day of the week for the period January 1 2000 to December 31 2099 Setting of the date by the time cali
21. formation can be found in the Reference section Battery Level Indicator World Time Mode ee OB Alarm Mode Ald OF Stopwatch Mode STW aome nu on San o0 og To display the digital time and last signal screen e In the Timekeeping Mode press to cycle through the digital time screens as shown below e In the Timekeeping Mode press O to display the last signal screen The last signal screen shows the date and time of the last successful time calibration signal reception Date Receiving r Receiving ay m Indicator and rh indicator Press Seconds Count a 0 WORLD TIME _ALM_Ds WE 30 AWE 30 es current Time i Screen 4 a Seconds 10 0675 PM indicator Day of week Press Reception date 5 30 2 seconds Last Signal Screen 2 seconds Time Calibration Signal Reception There are two different methods you can use to receive the time calibration signal auto receive and manual receive e Auto Receive With auto receive the watch automatically picks up the time calibration signal five times a day at 0 00 a m 1 00 a m 2 00 a m 3 00 a m and 4 00 a m For more information see About Auto Receive e Manual Receive Manual receive lets you start time calibration signal reception with the press of a button For more information see To perform manual receive L oO ey Reception Time Important e When getting ready to receive the time calibration signal positi
22. ght Saving Time is turned on e Note that you cannot switch between Standard Time and Daylight Saving Time while toMT is selected as the city code e Note that the DST Standard Time setting affects only the currently displayed city code Other city codes are not affected CASIO Operation Guide 3309 3345 Alarms On Off status You can set three independent Daily Alarms When an Alarm Mode alarm is turned on the alarm tone sounds when the alarm number indicator time is reached You can also turn on an Hourly Time Signal that causes the watch to beep twice every hour on the hour e The alarm and Hourly Time Signal operate in accordance with the current digital time e The alarm number AL1 though AL3 indicates an alarm screen SIG appears in place of the alarm number when the Hourly Time Signal screen is shown e All of the operations in this section are performed in the Alarm Mode which you enter by pressing WOF LD TIME ALM _ DsT Alternate at two second interval Alarm time Hour Minutes To set an alarm time 1 In the Alarm Mode press to select the alarm whose Wy N time you want to set WORLD TIME _ALM DST AL1 AL2 AL3 SIG 2 Hold down until the hour setting of the alarm time starts to flash which indicates the setting screen e This automatically turns on the alarm 3 Press to move the flashing between the hour and minute settings 4 While a setting is
23. he setting screen e The second hand will move at high speed to the 12 o clock position where it will stop KO 2 Use or to move the flashing in the sequence shown below to select other settings Transmitter indicator Press gt Press gt Transmitter Receive Time Date Settings Seconds Minutes Transmitter City Settings Day Year Toggle between Daylight Saving Press Time 5H Standard Time F or Auto DST Toggle between auto receive on Press H and off CF See City Code Table for a complete list of available city codes Time Date Settings Screen To do this Do this 12H Toggle between 12 hour 1E H and Press 24 hour E4 H timekeeping Reset the seconds to 00 Press Toggle the illumination duration Press setting between 1 5 second and 2 5 seconds Use and Change the hour or minutes Change the year Use and Change the month or day Use and Toggle Power Saving on F4 and Press PEON off ae e For information about settings other than the time and date see the following Illumination duration Illumination Power Saving Power Saving Function 4 Use to exit the setting screen e If a Transmitter City Setting screen is displayed press twice e If a Time Date Setting screen is
24. ila WLG Wellington 12 0 Christchurch Nadi Nauru Is e Based on data as of June 2003
25. ile a split time is frozen on the display clears the split time and returns to elapsed time measurement e The stopwatch measurement operation continues even if you exit the Stopwatch Mode e All of the operations in this section are performed in the Stopwatch Mode which you enter by pressing Minutes Seconds To measure times with the stopwatch Elapsed Time D D O 0 Start Stop Re start Stop Clear Split Time D AmA LD MO Start Split Split release Stop Clear Two Finishes D Am0 llOO Start Split Stop Split release Clear First runner Second runner Display time of finishes finishes second runner Display time of first runner Illumination An LED light emitting diode and a light guide panel illuminate the digital display for easy reading in the dark e See Illumination Precautions for other important information To illuminate the display In any mode press to illuminate the display e You can specify 1 5 seconds or 2 5 seconds as the illumination duration See To set the current digital time and date manually for more information CASIO Battery This watch is equipped with a solar cell and a rechargeable battery secondary battery that is charged by the electrical power produced by the solar cell The illustration shown below shows how you should position the watch for charging Example Orient the watch so its face is pointing at a light source Solar
26. ime setting 1 In the Timekeeping Mode hold down until the transmitter indicator starts to flash which indicates the setting screen 2 Press twice and the DST setting screen appears 3 Use to cycle through the DST settings in the sequence shown below Auto DST Fi DST on ct 4 When the setting you want is selected press twice to exit the setting screen e The DST indicator appears on the display to indicate that Daylight Saving Time is turned on Analog Timekeeping The analog time of this watch is synchronized with the digital time The analog time setting is adjusted automatically whenever you change the digital time Note e The hands for the analog timepiece move to adjust to a new setting whenever any of the following occurs When you change the digital time setting manually When the digital time setting is changed by time calibration signal reception When you change the Home City code and or DST setting e If the analog time does not match the digital time for any reason use the procedure described under To adjust the analog time to match the analog setting to the digital setting e Whenever you need to adjust both the digital and the analog time settings manually make sure you adjust the digital setting first e Depending on how much the hands have to move in order to adjust to the digital time it may take some time before they stop moving Operation Guide 3309 3345 To adjust the an
27. l 4 receiving indicator indicates that at least one of the five calibration signal reception was successful Note however that the Level 4 receiving indicator is cleared from the display at 3 00 a m each day To perform manual receive 1 Place the watch on a stable surface so its top 12 o clock side is facing towards a window 2 In the Timekeeping Mode hold down for about two seconds until the watch beeps 3 Release and RC flashes to indicate that signal reception has started e When a reception starts the second hand will move at high speed to the 12 o clock position where it will stop until the reception is complete Receiving indicator e Time calibration signal reception normally takes from two to seven minutes but in some cases it can take as long as 14 minutes Take care that you do not perform any button operations or move the watch during this time e After signal reception is complete the display of the watch changes to the last signal screen Note e To interrupt a reception and return to the Timekeeping Mode press e If the reception is unsuccessful the message EEF F appears on the display for about one or two minutes After that the watch returns to the Timekeeping Mode e You can also change from the last signal or EFF screen to the normal timekeeping screen by pressing O To turn auto receive on and off 1 In the Timekeeping Mode hold down until the transmitter indicator starts to flash
28. on the watch as shown in the nearby illustration with its 12 o clock side facing towards a window Make sure there are no metal objects nearby F amp pF Resin Band Metal Band e The watch should not be on its side or facing the wrong way Operation Guide 3309 3345 e Proper signal reception can be difficult or even impossible under the conditions listed below Inside or Inside a Near a Near high Among or among vehicle household construction tension behind buildings appliances site airport or power lines mountains office other sources equipment of electrical or a mobile noise phone e Signal reception is normally better at night than during the day e Time calibration signal reception takes from two to seven minutes but in some cases it can take as long as 14 minutes Take care that you do not perform any button operations or move the watch during this time 1 000 kilometers Rugby 500 kilometers e This watch is designed to receive the time calibration signal transmitted from Rugby England and the signal from Mainflingen Germany Signal reception is possible within the area represented by a circle with a radius of about 1 000 kilometers e At distances further than about 500 kilometers from a transmitter signal reception may not be possible during certain times of year or times of day Radio interference may also cause problems with reception See the information under Signal Reception Troubleshooting if you
29. ry WORLD TIME LM_DST changes P L 0 e The watch will perform a signal reception even if it is in gt the World Time Mode when a calibration time is oR reached If this happens the World Time Mode time settings will be adjusted in accordance with the Timekeeping Mode s Home City time e All of the operations in this section are performed in the World Time Mode which you enter by pressing To view the time in another city While in the World Time Mode press to scroll through the city codes time zones e For full information on city codes see the City Code Table To toggle a city code time between Standard Time and Daylight Saving Time 1 In the World Time Mode use to display the city code time zone whose Standard Time Daylight Saving Time setting you want to change Pressing in the World Time Mode causes the applicable city code to appear on the digital display for about two seconds RO 2 Hold down to toggle Daylight Saving Time DST Al indicator displayed and Standard Time DST indicator DST indicator not displayed e Note that you cannot use the World Time Mode to change the DST setting of the Home City code you currently have selected in the Timekeeping Mode See To change the Daylight Saving Time summer time setting for information about turning the Home City code DST setting on and off e The DST indicator will appear on the display whenever you display a city code for which Dayli
30. starts to flash which indicates the setting screen e The second hand will move at high speed to the 12 o clock position where it will stop Press again Press seven times until the Power Saving on off screen appears Press to toggle Power Saving on iF and off On Off status 5 Press to exit the setting screen e The second hand will advance at high speed to the correct position in accordance with the digital time seconds count and resume normal movement from there e The Power Saving indicator P is on the display in all modes while the Power Saving is turned on Module 3345 In this case The watch does this The first signal auto search operation 1 Checks the Mainflingen signal first after factory default settings are in effect 2 If the Mainflingen signal cannot be or after the city code has been changed received checks the Rugby signal Any case other than the above 1 Checks the last successfully received signal first 2 If the last successfully received signal cannot be received checks the other signal e Since the watch checks signals from both transmitters when Fi T is selected as the transmitter setting signal reception can take as long as 14 minutes 3309 To find out the module number of your watch look at its back cover The Module number 3309 or 3345 is 3345 engraved inside the box on the back cover Operation Guide 3309 3345 CAS
31. tch s built in full automatic calendar makes allowances for different month lengths and leap years Once you set the date there should be no reason to change it except after you have the watch s battery replaced or when battery level drops to Level 4 e The current time for all city codes in the Timekeeping Mode and World Time Mode is calculated in accordance with the Greenwich Mean Time GMT differential for each city based on your Home City time setting e GMT differential is calculated by this watch based on Universal Time Coordinated UTC data UTC is the world wide scientific standard of timekeeping It is based upon carefully maintained atomic cesium clocks that keep time accurately to within microseconds Leap seconds are added or subtracted as necessary to keep UTC in sync with the Earth s rotation The reference point for UTC is Greenwich England 12 hour 24 hour Timekeeping Formats The 12 hour 24 hour timekeeping format you select in the Timekeeping Mode is also applied in all other modes With the 12 hour format the P PM indicator appears on the display for times in the range of noon to 11 59 p m and no indicator appears for times in the range of midnight to 11 59 a m e With the 24 hour format times are displayed in the range of 0 00 to 23 59 without any indicator Illumination Precautions e The illumination provided by the light may be hard to see when viewed under direct sunlight e Illumination automatic
32. ves a time calibration signal and updates its time setting accordingly The time calibration signal includes both Standard Time and Daylight Saving Time summer time data e This watch is designed to pick up the time calibration signal transmitted from Rugby England and the signal from Mainflingen Germany Hour hand Minute hand Day of week Second hand Current Time Setting This watch automatically adjusts its time setting in accordance with a time calibration signal You can also perform a manual procedure to set the time and date when necessary e The first thing you should do after purchasing this watch is to set your Home City which is the city where you will normally use the watch For more information see To set your Home City below e When using the watch in an area that is outside of the range of the transmitters in Rugby and Mainflingen you need to manually adjust the time as required See Timekeeping for information about manual settings e The analog time of this watch is synchronized with the digital time Because of this the analog time setting is automatically adjusted whenever you change the digital setting See Analog Timekeeping for more information To set your Home City 1 In the Timekeeping Mode hold down until the transmitter indicator AT EZF MF starts to flash which indicates the setting screen e If the displayed transmitter indicator shows something other than FT use
Download Pdf Manuals
Related Search