Beckett 800 Burner User Manual
Contents
1. The illustrations in this guide are schematic and may not exactly match with your product The values that are declared in the markings on your product or in the printed documents accompanying are obtained in a laboratory environment according to the related standards These values may vary according to the usage of the product and environmental conditions 4 6 2 Warnings e This product is designed for household usage e Your washing machine is adjusted to 230 volts Your machine may not operate with low voltage e f the current value of the fuse at your home is less then 16 amperes consult a qualified electrician and have a fuse of 16 amperes installed e When using with or without a transformer make sure that the grounding installation is made by a quali fied electrician When used without grounding our company shall not be responsible for the possible damages In order to make your machine ready to use call Authorized Service and if your clean water installation and water drains are not proper call a qualified plumber e Your machine should not be placed on a rug covered floor Otherwise electrical parts may overheat since your machine will not be able to take air from the bottom This may lead to the machine malfunction e While installing the machine make sure that the hot and cold water taps are connected correctly Otherwise your laundries may come out hot in the end of washing process and wor2. the fuse may be blown Is water coming from under your machine Check the water inlet and drainage hoses Are they well mounted Gaskets of the water inlet hoses may not be well seated If the problem is none of them the pump filter may not be well closed Is the water drained directly Check if the drainage hose is connected as described in the user guide During the water drainage you may hear water sound from the pump This sound is normal Is foam running over the detergent drawer Check if your detergent is suitable for automatic machine Use the recommended amount of detergent in your next washing If sometimes you are not satisfied with the rinsing and spinning efficiency laundries have detergent remnants or they are not dry enough Make sure that you have selected the correct program you have adjusted the speed adjusting decrease button correctly and you have loaded the right laundries for the program you have chosen try again when the voltage is normal 6 ED EJ Installation Removing the packaging rein forcements To remove the packaging reinforcement lean the machine backward take the reinforcement by pulling from the braid Removing the transportation safety bolts Before operating the machine the transportation safety bolts must definitely be removed For this 1 Loosen the bolts thoroughly by turning them anticlockwis
3. opening 5 Reinstall the foreign substance filter and turn it tightly clockwise 6 Close the service cover 4 15 ED
4. the program ends End light comes on After the program is complete the machine will not allow you to open the door for a while for your safety If you want to open the door meanwhile the door will not open and the Door light will flash After the door lock is deactivated the Door and End lights will come on Now you can open the front door You can switch your machine in to the Pause mode by press ing the Start Pause Cancel button while your machine is operating In this case Start Pause Cancel light will flash You can make some changes in the program settings in the Pause mode See Changing the Program and you may also benefit from the laundry addition function if the Pause mode is selected at a suitable step of the program See Laun dry addition function In order to return to the Washing mode from the Pause mode you need to press the Start Pause Cancel button again In this case Start Pause Cancel light will flash and your machine will resume its program 12 amp Changing the Program Even if a new program is selected by changing the position of program selection knob while your machine is operating the first selected program continues to run In order to change the washing program the ongoing program should be cancelled See Cancelling a program In order to change the auxiliary functions while your machine is operating you ca
5. In this case the water remain ing in the pump and hoses should be drained by removing the pump filter Water inlet hoses should also be emptied by removing them from the taps Cleaning the pump filter e Clean the foreign substance filter periodically at least for once e f the foreign substances coins buttons baby socks and etc clog the foamy water pump clean the filter e Before cleaning empty the water that remains inside first e Hot water danger There may be 15 liters of hot water at 90 C in the machine Open the filter carefully Drain the water completely in the following 14 ED situations e before cleaning the foreign substance filter e before transporting the machine for example moving into a new house e when there is a risk of freezing 1 Turn off the appliance unplug the power cable and close the tap Wait for the hot soapy water to cool enough Otherwise there is a risk of scalding 2 Open the service cover by pressing the button In order to prevent the little amount of water that is inside pump spilling over the floor put a container in front of the filter cover Take out the filter by turning anti clockwise 3 To loosen the foreign substance filter turn it half turn anticlockwise and take the remaining water with a cloth When there is no water turn the foreign substance filter until it is totally released and take it out 4 Clean the foreign substance filter and pump
6. Pressing the On Off button never means that the program is started 10 You must press Start Pause Cancel button in order the machine starts its program Program selection table Determine the suitable program according to the type amount dirtiness level and washing temperature of the laundry by looking at the program selection table Turn the program selection knob to the program temperature position that you want to wash with A 2 3 3 Ke S Q oO E E D E e a 3 B 2 P z E _ S E rogram Laundry type S 2 amp Z gt 5 z so T 9 EF 8 8 17 cy Cotton 90 y Very dirty heat resistant cotton linen e e Cotton 60 9 Normal dirty heat resistant cotton linen e o Cotton 40 v Less dirty or heat resistant cotton ele Cold Cotton 3 Less dirty or heat resistant cotton ele Super 40 Hp if Very dirty and heat resistant cotton Normal dirty heat resistant cotton syn Synthetic 60 re thetic compound 29 i Less dirty or heat resistant cotton syn Synthetic 40 thetic compound ee Very little dirty or heat resistant Synthetic 30 rN cotton synthetic compound eq 9 Very little dirty or heat resistant Cold Synthetic 3 amp cotton synthetic compound ee f Sensitive Delicate synthetic cotton Delicate 30 I compound ele Woolens and sensitive compounds with Woolen 40 Gg machine washable label
7. Washing Machine 2012 CX 2112 CX Contents Specifications of your Ei il Washing Machine 4 A Warnings 5 Things to do Before Calling the Authorized Service 6 Removing the packaging reinforcements 7 Removing the transportation safety bolts 7 EJ Installation 7 Adjusting the feet T Water connections 8 Electrical Connection 9 4 J Preparation 9 Control Panel 10 Turning On Off 10 Program Selection and Operating Your Machine 10 Program selection table Function Selection 2 Auxiliary Functions Child Lock 12 Program Flow Changing the Program Cancelling a program Laundry Addition Function End of the Program Unloading the Laundries Detergent Drawer Siphon 14 nlet Water Filters Maintenance and 6 cleaning 14 Hose 14 Cleaning the pump filter 14 a N RWWWWWP P Your Washing Machine 1 Detergent Drawer 4 Adjustable feet A Control panel H Front door Hi Tabletop i Filter cover 3 E amp D Ell Specifications of your Washing Machine 2012 CX 2112 CX Maximum dry laundry capacity kg 5 5 Height cm 85 85 Width cm 60 60 Depth cm 54 54 Net Weight kg 61 61 Power inlet VHz 220 240 50 220 240 50 Total current A 10 10 Total Power W 2200 2350 2200 2350 Washing rinsing speed rpm 52 52 Spin speed rpm max 600 600 In order to improve the product quality modifications can be made in the specifications without prior notice
8. aps to the maximum after the connection Check if there is any water leakage at the connec tion points In order to prevent the water leakages and the damages they may cause keep the taps closed when you are not using the machine Minimum 1 bar and maximum 10 bars of water flow from the tap is enough for your machine to operate efficiently In practice 1 bar means that more than 8 liters of wa ter per minute flows from a full open tap Install the elbowed end of the hose to your machine Hand tighten the nuts of the hose do not use a spanner Models with double water inlets can be used as a model with a single water inlet by using a plug Plug should be installed to the hot water valve A rubber gasket should be used in order to prevent water leakage from the connection point Do not connect the product with single water inlet to the hot water tap The prod uct may switch to the protection mode if the temperature of the water connected to a product with double water inlet through a Y part and single water inlet is above 40 C a Water drainage hose Water drainage hose can be attached to the side wall of a sink or bathtub Hose should not be bend When the drainage hose is hanged on a sink or bathtub it can be secured with a hose bracket so that it will not fall The end of drainage hose can be connected directly to the waste water drainage hole or to the specific end that is installed to the outl
9. as shown in the illustration Wash the drawer in the sink with plenty of water Siphon be cleaned when they get dirty To do this close the taps Remove the water inlet hoses Clean the tops of the filters on the water inlet valves with a thin brush If the filters are very dirty you can pull out with pliers and clean them The filters on the flat end of the water inlet hoses should be taken out with their gaskets by hand and cleaned thoroughly under the flowing water There are 2 filters in the machines with single cold water inlet and 4 filters in the machines with double hot cold water inlets gt K RLS r Do not forget to clean the siphon the colored part in the detergent drawer when it gets dirty To remove the siphon first take out the detergent drawer To prevent clogging clean the softener remnants inside of it After cleaning put back the siphon and check if it is well seated or not S f Umax 1 Inlet Water Filters At the end of the water inlet valves which are mounted to the back of the machine and the flat end of the water inlet hoses that are mounted onto the taps there is one filter for each These filters prevent the foreign substances and dirt in the water entering the machine Filters should Hose Since there is a risk of freezing especially in the cold areas the water remaining in the appliance can frozen and damage the appliance
10. e with the help of a suit able wrench 2 Pull off the transportation safety bolts 3 Insert the plastic caps in the direction of arrow into the holes from where the trans portation safety bolts are removed Please note Keep the transportation safety bolts in a safe place in order to reuse them for any other transportation Transport your washing machine with the transportation safety blots installed Adjusting the feet Your machine must stand level and balanced on its feet in order to operate more silent and vibration free First loosed the plastic counter nut on the adjustable feet of your machine After maintaining the balance by adjusting the feet tighten the plastic counter nut upwards 7 amp Water connections a Water inlet hose The specific hoses that come with the machine are connected to the water inlet valves on the machine Red labeled hose is for hot water inlet and blue labeled hose is for cold water inlet If you are going to use your double water inlet machine as a single cold water inlet unit you must install the stopper sup plied with your machine to the hot water valve If you want to use both water inlets of the product you can connect the hot water hose after removing the stopper and gas ket group from the hot water valve Applies for the products supplied with a blind stopper group Since the connection points are under water pressure turn on the t
11. et elbow of the sink The hose should be installed to a height of 40 cm minimum and 100 cm maximum 70 8 9 10 110 50 60 40 30 20 10 0 8 ED Electrical Connection Plug in the grounded plug at the end of the power cable of the washing machine to a grounded wall outlet which is fed with suitable voltage and current 4 Preparation e Please note the followings before start ing to wash your laundry Have you plugged the machine Have you connected the drainage hose as necessary Have you closed the front door Have you opened the tap e If you are installing your machine by your self please read the Installation section first e Separation of the laundries to be washed Please separate the laundries according to their types cotton linen synthetic woolen etc dirtiness levels and washing tempera ture Do not wash the white clothes along with the colored ones Remove solid objects such as belts cuff links and curtain rods from the laundries or put them into a washing bag Empty the pockets Zip and button up It is recommended to place the very small laundries such as baby clothes into the big laundries such as pillowcases or put into a special washing filet in order to prevent them from sticking between the bellows or slipping into the cauldron pump filter hose and etc For stained laundries see the Practical and useful information sect
12. etic and wool fabrics in the machine after the wash program you may select the Rinse hold option to prevent them getting wrinkled If you want to cancel the Rinse Hold func tion you have to press on Start Pause Cancel button first select the desired spin speed and then repress on the Start Pause Cancel button Child Lock This machine is equipped with a child lock in order to prevent the program flow to be affected when the buttons are pressed during washing cycles In order to enable the child lock press and keep pressed the 1st and 2nd auxiliary function buttons from the left at the same time for 3 seconds The light of the 1st auxiliary function but ton will flash continuously After the program completes it is necessary to disable the child lock in order to initiate a new program or interfere the program Therefore when the same buttons are pressed for 3 seconds light of the second auxiliary function will go off Program Flow After the machine starts to operate the related light in the program follow up indicator comes on according to the selected program When a step is complete the light of the previous step goes off and the light of the related step comes on When On Off button is pressed the Door light comes on After the washing program is selected Washing light on the program follow up indicator comes on when the Start Pause Cancel button is pressed When
13. ion Your machine can wash the woolen clothes with a Machine Washable or Unfeltable label in the special woolen program without damaging them Sensitive clothes with a Do not wash in the machine or Hand wash silk pure wool cashmere and etc label can be washed in the hand wash program which is designed specifically e To open the front door grab the handle and pull it For your safety the front door of your machine can only be opened when the machine is not operating If the ready LED is on the door can be opened e Loading the laundry into the machine Place the laundries by spreading and without compaction Place your hand woven clothes into the machine by turning inside out When closing the door make sure that no laundry is in between the door and the rubber bellows Push the front door to close it If the front door is not closed correctly washing does not start e The selection of detergent and softener The detergent amount depends on the hard ness of water the amount of laundry and the dirtiness level of the laundry Recommended amounts are written on the detergent pack age If your laundries are not very dirty and or your water has a low hardness use less detergent as recommended in the detergent packages Otherwise you may encounter excessive foam You should use detergents that are developed especially for automatic washing machines Avoid using bleachers that contain chlo
14. is Woolens and sensitive compounds with Cold Woolen C4 machine washable label al Special program for laundries that have Hand Wash 30 y silk cashmere un washable in machine labels mini Special program for very little dirty or small Mini 30 39 amounts of laundries sweat suit towel and etc that are used only for once Rinsing wy Rinsing Program Spin Pump Spin Pump Program 3 5 11 0 03 Energy Label Program EN 60456 1999 and IEC 60456 hardness and temperature environmental temperature Ed 4 2001 Water and power consumption may show differences from the table above depending on the water pressure 11 laundry type and amount auxiliary function selection and changes in the electricity voltage ED Function Selection Depending on the selected program the selectable auxiliary functions are selected by pressing the each function s button The light of the selected function comes on Since it is not possible to select some of the auxiliary functions together one of them becomes off when the other one is selected Auxiliary Functions Prewash To wash the very dirty laundries you can use this function in the cotton and synthetic programs Rinse Plus You can increase the number of the current rinsing cycles by using this function Thus the risk of the sensitive skins get effected by the detergent remaining on the laundry is reduced Rinse Hold If you desire to leave your synth
15. m selection knob is changed while your machine is operating In order to change the washing program a new program can be selected and started after Cancelling a program by pressing the Start Pause Cancel button for 3 seconds as described above End of the Program When the program ends End light on the program follow up indicator comes on End and Door lights come on within two minutes after the door is opened the machine becomes ready for the next washing If any of the buttons is pressed or the position of the selection knob is changed when the machine is at the end of a program End light goes off and only the Door light remains on Meanwhile if the door is still locked the Door light flashes until the door is opened To turn the machine off press the On Off button Unloading the Laundries Your machine stops automatically when the program ends Turn off the taps Grab and pull the handle to open the door Press On Off button to turn off your machine After you take the laundries out leave the front door open and ventilate the inside of the machine Check the inside of the bellows and wipe it 13 J Maintenance and cleaning Detergent Drawer The powder detergent remnants may accumulate in the detergent drawer To clean the detergent drawer pull the drawer towards you by pressing the marked point of the siphon in the softener compartment
16. n make any desired changes after pressing the Start Pause Cancel button If you want to change the spin speed while your machine is operating press the Start Pause Cancel button select the spin speed and press the Start Pause Cancel button again Laundry Addition Function If you want to add laundry to your machine after the washing program starts switch the machine to pause mode by pressing Start Pause Cancel button If the water level in the machine is suitable the Door light on the program follow up indicator comes on approximately 2 minutes later and you can open the door and add laundry If the Door light is not continuously on at the end of this period the water level in the machine is not suitable and you can not add laundry You can resume the program by pressing Start Pause Cancel button again Cancelling a program In order to cancel the selected program Start Pause Cancel button is pressed for 3 seconds and machine starts to drain at the end of this time Meanwhile Washing and End lights are on After the drainage process completes Start Pause Cancel and Washing lights are off Door light starts to flash When the Door light is on continuously the door can be opened and a new program can be selected You can start a program by selecting a new program The selected program continues to run even if the position of progra
17. n out e When the supply cord plug of the machine is damaged you must call the authorized service e Make sure that the water inlet hoses are new Do not use worn out used water inlet hoses again It may cause stains to remain on your laundries Before washing the clothes that are pre treated with cleaning agents gasoline ether liquid stain remover and etc rinse thoroughly with clean water e Never wash the device with a water hose There is a risk of electric shock Before cleaning always disconnect the electricity connection by unplugging e Never touch the plug with wet hands Never grab from the cable but from the plug when unplugging e f the power cable or the plug is damaged or the appliance shows any other errors do not operate the appliance e For the failures that can not be solved by applying the information given in these operating instructions Turn off the machine unplug it close the water tap and contact with the cus tomer service center Never try to repair the machine by yourself e When you operate your washing ma chine for the first time use Cotton 90 program with detergent without loading the machine with laundry in order to make it ready for washing your laundry After washing the very dirty clothes such as the working clothes of a car techni cian it is recommended to repeat the machine cleaning process e The performance of your washing achine depends on the compound ffect of
18. rine or sulfur Put the powder detergent and softener into the appropriate compartments in the detergent drawer and close the detergent drawer Pour the softener as recommended in the package generally lt 100ml i e 1 tea cup Never exceed the MAX marking If you put more it will mix into the washing water 9 ED via siphon lll and it will be wasted In this case it may be necessary to refill the softener If the softener is condensed over time it may be necessary to dilute with some water Otherwise condensed soft ener clog the siphon and block the flow Compartment I the powder detergent compartment for prewash ll Compartment II the powder detergent compartment for main washing Ill Siphon lt The softener compartment FJ Program Selection and Operating Your Machine Control Panel foo 40 500 R 1000 r i lt 73 7 mh wy wS a aN A eo 9 60 F _super 40 E amp mini 30 N wy i 700 800 a ge ow 1 Program selection knob BA On Off button EJ Auxiliary function buttons Turning On Off You can make the machine ready for program selection by pressing the On off button When On Off button is pressed Door LED is on meaning that EJ Start Pause Cancel button E Program follow up indicator fl Spin speed selection knob door can be opened To turn off the machine press the On Off button again
19. the machine water and the eaning agent that is used If poor nd unqualified cleaning agents are sed stains on your laundries will be tabilized Before washing the stained laundries pay attention to clean them as described in the following pages e Your machine is designed to resume its operation when the power restores after a power failure You can not cancel the program by pressing On Off button When the power restores the machine will resume from the point it stopped e During the production some water may have remained in your machine because of the quality control processes It does not cause any damage to your machine e Plug must be accessible after installation e The repair or change of main plug should be carried out by authorized technicians or specialists e Main water pressure should be between 1 10 bars 23 e 1p 5 ED Things to do Before Calling the Authorized Service If the light of the 1st auxiliary function on the left hand side is flashing It is in the child lock mode See Child lock If the cover and washing light on the program follow up indicator is flashing and the end light is constantly on The program selection knob may be in between position Readjust the program by turning the program selection knob If the warning continues contact the authorized service If the light of Start Pause Cancel button starts to flashing after a short time you start yo
20. ur machine The door may not be properly closed Open and close the door again and restart the washing pro gram If the Washing light on the program follow up indicator is flashing The water may be cut or the taps may be closed Check the taps Turn off your machine and restart If the fault persists unplug your machine close the taps and contact the authorized service If the program can not be started or selected Machine may be in the self protection mode due to the substructure problems grid voltage water pressure and etc Therefore you can not start or select a program Press Start Pause Cancel button for 3 seconds and return the machine to the factory settings Gee Cancelling a Program If the water is cut while your machine is operating the current program does not proceed To continue the program Press Start Pause Cancel button program will proceed Your machine may stop due to the low voltage Wait for a while When the voltage reaches to a nor mal level your machine will start to operate During the production some water may have remained in your machine because of the quality control processes This does not cause any damage to your machine You have selected the program in your machine and pressed the Start Pause Cancel button but the machine did not start The plug of your machine may not be plugged in a grounded outlet front cover may not be closed or
Download Pdf Manuals
Related Search