Home

Banner American Products PLH4150 Laminator User Manual

image

Contents

1. 2 14 3 Transmit UPC E Check Digit EAN check digit UPC E transmitted UPC EAN check digit UPC E not transmitted 2 14 4 Transmit EAN 8 Check Digit EAN check digit EAN 8 transmitted EAN check digit EAN 8 not transmitted 2 14 5 Transmit UPC A Check Digit EAN UPC number system UPC A transmitted UPC number system UPC A not transmitted RoadRunners Evolution L 1D amp LA Laser Programming Guide v1 3 38 Data Capture ba racoda for Workforce Traceability in Motion 2 14 6 Transmit UPC number system for UPC E EAN UPC number system UPC E transmitted EAN UPC number system UPC E not transmitted 2 14 7 UPC A UPC E EAN conversions
2. RoadRunners Evolution L 1D amp LA Laser Programming Guide v1 3 36 baracoda Traceability 2 13 3 2 14 2 14 1 Data Capture for Workforce in Motion Set lengths for Standard 2 of 5 Standard 2 of 5 barcode length any length Standard 2 of 5 barcode length minimum length 6 LON UPC EAN Settings Enable Disable UPC EAN EAN activ AN nota UPC EAN UPC A and EAN 13 deactivated UPC EAN UPC E deactivated UPC EAN EAN 8 deactivated RoadRunners Evolution L 1D amp LA Laser Programming Guide v1 3 37 Data Capture ba racoda for Workforce Traceability in Motion 2 14 2 Transmit EAN13 Check Digit PC EAN check digit UPC A and EAN13 transmitted UPC EAN check digit UPC A EAN 13 not transmitted
3. 2 9 1 Enable Disable Code 93 To enable or disable Code 93 scan the appropriate barcode below Code 93 not active Code 93 active 2 9 2 Set Lengths for Code 93 Code 93 barcode length any length Code 93 barcode length minimum length 6 MO RoadRunners Evolution L 1D amp LA Laser Programming Guide v1 3 31 Data Capture ba racoda for Workforce Traceability in Motion 2 10 Code 128 Settings 2 10 1 Enable Disable Code 128 EAN 128 To enable or disable Code 128 EAN 128 scan the appropriate barcode below able 2 10 2 Set lengths for Code 128 EAN 128 ode 128 EAN 128 barcode length any leng ode 128 EAN 128 barcode length minimum leng RoadRunners Evolution L 1D amp LA Laser Programming Guide v1 3 32 Data Capture ba racoda for Workforce Traceability in Motion 2 10 3 EAN 128 Group Separator FNC1 included in an EAN128 code is transmitted by default as GS Group Separator 0x1D Disable GS Transmission There is also
4. EAN re encoding UPC A UPC E EAN 8 UPC A transmitted as EAN 13 UPC EAN re encoding UPC A UPC E EAN 8 UPC A transmitted as UPC A UPC EAN re encoding UPC A UPC E EAN 8 UPC E transmitted as UPC E UPC EAN re encoding UPC A UPC E EAN 8 UPC E transmitted as UPC A EAN re enc UPC A UPC E EAN 8 EAN 8 transmitted as EAN 8 EAN re encoding UPC A UPC E EAN 8 EAN 8 transmitted as EAN 13 RoadRunners Evolution L 1D amp LA Laser Programming Guide v1 3 39 Data Capture ba racoda for Workforce Traceability in Motion 2 14 8 ISSN ISBN settings UPC EAN ISSN ISBN Active UPC EAN ISSN ISBN Not active UPC EAN ISSN ISBN ISSN hyphen n
5. RoadRunners Evolution L 1D amp LA Laser Programming Guide v1 3 9 Data Capture ba racoda for Workforce Traceability in Motion 1 4 Operating Mode Real Time mode In real time mode the barcode is decoded and transmitted to the remote host without any delay If the scanner is not connected the data is lost Real Time mode with No Data Loss option If the No Data Loss option is activated and if the scanner is not connected or out of Bluetooth range the scanner will store the data It can memorise up to 10 000 barcodes UPC format and later automatically upload them to the remote host when a Bluetooth connection is established to the host Every barcode sent to the host must be acknowledged by the host If the host fails to send an acknowledgement the scanner will continue to transmit the barcode until the host does send an acknowledgement This acknowledgment is disabled in the default settings It is strongly recommended to set the No Data Loss mode to ON This configuration can be set with the BaracodaManager software or with the Programming Guide Additionally this protocol acknowledgment allows an end user to set an audio acknowledgment indicating that the barcode has been successfully transmitted to the host Batch mode Barcodes are always stored in the scanner Once the batch mode is selected the BCL led right emits an orange flash In batch m
6. Interleaved 2 of 5 check digit not used Interleaved 2 of 5 check digit mod 10 checked and transmitted Interleaved 2 of 5 check digit mod 10 checked but not transmitted RoadRunners Evolution L 1D amp LA Laser Programming Guide v1 3 34 Data Capture ba racoda for Workforce Traceability in Motion 2 11 3 Set lengths for Interleaved 2 of 5 terleaved 2 of 5 barcode length minimum length 6 Interleaved 2 of 5 barcode length any length 2 12 MSI Code Settings 2 12 1 Enable Disable MSI To enable or disable MSI code scan the pea barcode below Code not active MSI Code active 2 12 2 MSI Check Digit MSI Code check digit mod 10 checked and transmitted MSI Code check digit mod 10 checked but not transmitted MSI Code check digit double mod 10 checked and transmitted MSI Code check digit double mod 10 checked but not tra
7. RoadRunners Evolution L 1D amp LA Laser Programming Guide v1 3 18 Data Capture ba racoda for Workforce Traceability in Motion Read Set Timestamp label Read intermediary label Corresponding to the next digit to set for the Timestamp from Appendix 1 Read END of config label Programming procedure for set Timestamp option imestam Set T p END of configuration Noted that the timestamp must fit the specific following format YY MM DD HH MM SS The setting is made by scanning the 0 9 labels Appendix 1 as on a calculator following the timestamp format shown above For example to set the current time at 16th May 2007 3 25 pm the user will scan Set Timestamp label 0 label 7 label 0 label 5 label 1 label 6 label 1 label 5 label 2 label 5 label 0 label 0 label end of config label RoadRunners Evolution L 1D amp LA Laser Programming Guide v1 3 19 Data Capture ba racoda for Workforce Traceability in Motion 1 8 2 Data Prefix Suffix You can add a data prefix and or suffix strings of more than 32 characters will not be accepted to every barcode sent to the host device There is no data prefix or suffix in default settings Enable data prefix isable data p
8. Programming procedure for set min Max length option set min le art Set Max le End of config RoadRunners Evolution L 1D amp LA Laser Programming Guide v1 3 25 Data Capture ba racoda for Workforce Traceability in Motion 2 5 1 Symbology table Header Selected Symbology HA seo HIN lt DINO coreo A gt LA OLA dt VAN eastern HA lt gt lt LAL gt Only the variable length symbologies appear 2 6 Codabar settings 2 6 1 Enable Disable Codabar To enable or disable Codabar scan the appropriate barcode below I Disable able En RoadRunners Evolution L 1D LA Laser Programming Guide v1 3 26 Data Capture baracoda for Workforce Traceability in Motion 2 6 2 Codabar Start Stop characters Not transmitted Transmitted 2 6 3 Codabar Check Digit Verification AIM recommendation Not used Checked and transmitted Checked but not transmitted 2 6 4 Set Lengths fo
9. Document Date Description 1 0 11 July 08 Initial release 1 1 26 Aug 08 Update Batch section amp add The different connection method section 1 2 11 Sept 08 Add Smart Autoscan option 1 3 02 July 09 Modify Operating Mode section amp Add buffered data section RoadRunners Evolution L 1D amp LA Laser Programming Guide v1 3 4 Data Capture ba racoda for Workforce Traceability in Motion Introduction The RoadRunners Evolution scanner can be programmed by scanning barcode labels which contain commands for the decoder Programming labels must be Code128 with specific starting and ending characters These labels will always be read even if Code128 symbology is disabled The scanner will acknowledge a good and valid programming barcode label reading with two beeps and a green enlightening of the led It will give two other beeps lower tone and a red enlightening of the led for either an invalid or bad reading Please do not read the programming barcodes while being connected to the BaracodaManager software Programmable options are divided into 2 groups The first group includes the options that show the general behaviour of the scanner The second group sets the decoding parameters for each barcode symbology This document concerns the Roadrunners 1D Evolution scanners that is the BRR L Evolution and the BRR LA Evolution All our documentations can be downloaded from the Partners
10. Data Capture ba racoda for Workforce Traceabil ity in Motion RoadRunners Evolution L 1D LA Laser Programming Guide OBaracoda July 2009 E Bluetooth Data Capture ba racoda for Workforce Traceability in Motion SUMMARY SUMMARY 0000 ss A GERE ew a ee de ee ee A SEE ee eee 2 REVISION HISTORY see cose eld ska ed ee kjeks je ee a a el 6 EG se r Ja 4 INTRODUCTION ocio a sake ske sed Skee ET ab Ge Bee be ke 5 1 GENERAL CONFIGURATION o 6 1 1 GENERAL DEFAULT SETTINGS erre ee eee erre erre 6 1 2 BARACODA ADVANCED FEATURES eee e eee ee eee ee ee eee ee eee ee ee eee eee 7 2 Ls GWITGH ON DELAY a erter Baw res ee See Pia ead deere Shoe God EE eee wae eee 7 Lazo SBUTDOWN TIMERS dia a GAG a eee ene ate ae Aes E aerate wh eae ob Gi aoe ea eed 7 2535 TURN SCANNER OE E e AA A A A Ore eek 7 1 2 4 NO DATA LOSS MODE AND BARACODA HEADER escitas iia 8 1 3 READING MODE cami a KEN ae AR 8 1 4 OPERATING MODE sio S056 5 ir a SS ee e EKG ee eee Be ee eS S 10 Lad Lg REAL TIME MODE id RA A A E S AAE ek SG 11 4 2 NO DATA LOSS MODE ENABLE ACK BEEE ss eee a a aE ea dul Lada NO DATA LOSS MODE DISABLE ACK BEER 6400 RA Guise s 11 Ledet READ TIME BUFFERED DATA OPTION ss eske SE Sheen RE See ae GR Ge SEE GN Eee dt LS BATOH MODE Seas RSRK VSTAK SLETTA ERE SRG E E a dah ts d BG kr Aae ee 12 1 5 THE DIFFERENT CONNECTION METHO
11. Enable data suffix Disable data suffix If enabled a data prefix suffix can be set as following Read set prefix suffix barcode Read intermediary label corresponding to the next character to set for the prefix suffix see appendix 1 Read end of config barcode Procedure to define Data Barcode Prefix Suffix RoadRunners Evolution L 1D amp LA Laser Programming Guide v1 3 20 Data Capture baracoda atone Traceability in Motion Set Data prefix Set Data suffix End of configuration 1 8 3 Barcode Prefix Suffix You can add a barcode prefix and or suffix strings of more than 32 characters will not be accepted to every barcode sent to the host device There is no barcode prefix or suffix in je settings nable barcode prefi Disable barcode prefix Enable barcode suffix sable barcode suffix
12. device Set device to Class1 power emission 20dBm mit device to Class2 power emission 10dBm RoadRunners Evolution L 1D amp LA Laser Programming Guide v1 3 17 baracoda Traceability Data Capture for Workforce in Motion 1 8 Data format added by BaracodaManager only The barcode string can be added a timestamp prefixes and or suffixes The symbology prefix suffix can be These can come as described below Timestamp Data prefix Data which type can be barcode or RFID Data suffix 12 chars Max 32 chars Max 32 chars 1 1 1 1 1 1 1 1 J j y i Barcode Data If data type is barcode it comes with this data frame format Barcode prefix Barcode Barcode suffix Max 32 chars Max 32 chars Barcode Depending on the barcode type symbology additional data can be added Symbology prefix AIM identifier Data barcode Symbology suffix Max 4 chars 0 2 or 3 chars Max 4 chars 1 8 1 Timestamp option Timestamp can be configured ON OFF set new date and new time by the following configuration barcodes Timestamp on imestamp off T f
13. 00 c3 EF 44 a2 B9 the user will scan Set Remote BDA label 0 label 0 label c label 3 label E label F label 4 label 4 label a label 2 label B label 9 label End of Config label Set Remote BDA End of Config VLFYLFENDA ANNULNSOH FF F F RoadRunners Evolution L 1D amp LA Laser Programming Guide v1 3 13 Data Capture ba racoda for Workforce Traceability in Motion 1 6 Buzzer and Led Settings You can use these options to enable or disable the buzzer and or the Led LED ON LED OFF ood read beep Good read beep off ACK beep on ACK beep off p level volume HIGH p level Volume LOW BUZZER ON BUZZER OFF RoadRunners Evolution L 1D amp LA Laser Programming Guide v1 3 14 Data Capture ba racoda for Workforce Traceability in Motion Lets Bluetooth settings 1 7 1 Bluetooth name You can change the scanner Bluetooth name name that you see during a search of Bluetooth peri
14. C Hy EAN CONVERSIONS rates a A sat eee e he Ska 39 2 014 8 ISSN ISBN SETTINGS verdas sde ee eek esse se Gea A sje BOE See ra a 40 249 ADDON DIGITS SETTINGS aria ie ae GE BE DTS REESE SSG ke RA ae 40 2 15 GS1 DATABAR RSS 14 SETTINGS o te te tee te eens 41 Za LS Lo ENABLE DISABLE GSU DATABAR Vd ii a a aaa 41 2 15 2 GS1 DataBar 14 CHECK DIGIT TRANSMISSION oooooooooooooooooonoronao ooo oo 41 2 15 3 GOL DATABAR 14 LINKAGE FLAG TRANSMISSION o o ooooooooooonooorssar oross o 41 2 15 4 GS1 DataBar 14 APPLICATION ID TRANSMISSION ooooooooooooooooanronaa oo 41 2 16 GS1 DATABAR RSS LIMITED SETTINGS o e o o 42 Ze Borb ENABLE DISABLE GST DATABAR LIMETEDO ia a a ia wd amp 42 201622 SL DATABAR LIMITED CHECK DIGIT TRANSMISSION sce cai a g eee 42 2 16 3 GS1 DATABAR LIMITED LINKAGE FLAG TRANSMISSION 2 cece eee eee ee eee ee ee eee eee 42 2 16 4 GS1 DATABAR LIMITED APPLICATION ID TRANSMISSION ere siede rawn a ee ee ee eee 42 3 APPENDIX 1 ASCII TABLE A Z A Z 0 9 PUNCTUATION CONTROL CHARACTERS socio csse e a A A a BUS ELS SOS ej 43 4 APPENDIX 2 AIM SYMBOLOGY IDENTIFIERS STRUCTURE 48 RoadRunners Evolution L 1D amp LA Laser Programming Guide v1 3 3 Data Capture ba racoda for Workforce Traceability in Motion Revision History Changes to the original manual are listed below
15. DS eee eee o eee eee eee eee teens 13 1 6 BUZZER AND LED SETTINGS oo ooo e e 14 1 7 BLUETOOTH SETTINGS voor de Enake a a a base e 15 LiFe Ls BLUETOGTA NAME a a de e a Sa en de eee eget S Le FaZa SNIPE PERIOD SETLINGS a ds RS A AA AA A A 16 lelea SECURITY CODE PIN SETTINGS ri A A A AA A deans eal weenie acts 17 Ly wae IRE POWER EMISSION SETTINGS is a a a di at re ee a 17 1 8 DATA FORMAT codos a a da ia 18 BL TIMESTAMP OPTION oas rie AA E A AAA A AA Serer ce ee 18 18 20 DATA PREFIN SUFEIK a can a E a caso 20 Li aSe BARCODE PREKIX SUFFIK A A a 21 L 8x4 AIM SYMBOLOGY IDENTIFIER cr o led far arken 22 2 DECODER PARAMETERS xo ssec a ii a A we Eee ee a ee 23 2 1 DECODER DEFAULT SETTINGS isos cas Paes Sts BS bar owls Sa eee VG 23 2 2 ENABLE DISABLE ALL SYMBOLOGIES 23 2 3 SET DECODER BARCODE LENGTH e e ee eee eens 23 24 VOTING EE a bed ee ed dea Eads 24 2 5 MIN MAX LENGTH PER SYMBOLOGY oo ooooo oo e renere 25 Lidia OYMBOLOCY TABLE dt lo a e AN NA IA A A di Sa 26 2 6 CODABAR SETTINGS sa 0000 A a Be We a 26 2464 ly JENABLE DISABLE CODABAR bi a ti Orea cs 26 26 25 CODABAR START STOP CHARACTERS a iia dew 2 2a SIONES CODABAR CHECK DIGIT VERIFICATION AIM RECOMMENDATION oooooooooooo ooo oo oooo oo 27 2 694 SET LENGTHS FOR C DABAR ini A S A A E E ee
16. GS1 DataBar RSS Limited Settings 2 16 1 Enable Disable GS1 DataBar Limited GS1 DataBar Limited active GS1 DataBar Limited not acti 2 16 2 GS1 DataBar Limited Check Digit Transmission GS1 DataBar Limited check digit transmitted DataBar Limited check digit not transmit 2 16 3 GS1 DataBar Limited Linkage flag Transmission DataBar Limited Linkage Flag not transmitted DataBar Limited Linkage Flag transmitted 2 16 4 GS1 DataBar Limited Application ID Transmission GS1 DataBar Limited Application ID transmitted 1 DataBar Limited Application ID not transmitted RoadRunners Evolution L 1D LA Laser Programming Guide v1 3 42 Data Captu
17. If enabled a Barcode prefix suffix can be Pe in the same manner as the Data prefix suffix can be set et Barcode prefix Set Barcode suffix End of configuration RoadRunners Evolution L 1D amp LA Laser Programming Guide v1 3 21 Data Capture ba racoda for Workforce Traceability in Motion 1 8 4 AIM Symbology Identifier AIM Identifier will be transmitted at the beginning of the barcode More information about the AIM Identifier is available in Appendix2 AIM Symbology identifier not transmitted AIM Symbology identifier transmitted RoadRunners Evolution L 1D amp LA Laser Programming Guide v1 3 22 Data Capture ba racoda for Workforce Traceability in Motion 2 Decoder Parameters 2 1 Decoder default settings Sets the defaults decoder settings for all the symbologies t Decoder Default Settin 2 2 Enable Disable All Symbologies Even if all symbologies are disabled the scanner will always be able to read the programming barcodes of this document Disable all symbologies nable all symbologies Dad Set decoder barcode length You can set a fixed length for the barcode decoding The scanner will only decode barcodes of this length regardless the barcode symbology decoded Read Set barcode
18. aa sa aa a ia A a a 32 221063 EAN 1282 GROUP SEPARATOR ea ia A A A caia 33 210044 ENABLE DISABLE AIM ID TRANSMISSION dia a a sete Se tie a 34 2 11 INTERLEAVED 2 OF 5 SETTINGS o oo o oo e 34 2 11 1 ENABLE DISABLE INTERLEAVED 205 5 eii a e 34 Zi LL ds INTERLEAVED Zor 5 CHECK DIC Praia e e A a ee cata A eee 34 2M 34 SET TENGTHS FOR ENTERUBAVED 2 OF Drain A a eda 35 2 12 MST CODE SETTINGS ea A A A ke see es 35 212 32 ENABLE DISABLE MSL Leese see Gelert ease ae hekke Ses Sele de Ge bade ae see eos 35 22s OL CHE CR AID TG UT sah pte coats a A ea 35 Za Za SET LENGTHS FOR MS Ti A Ge STE A enw A a a c 36 2 13 STANDARD 2 OF 5 SETTINGS e e o o 36 2013 Lo ENABLA DISABLE STANDARD 2 DE Dosis a a Sankt 36 Pel 32s STANDARD 2 OF 5 CHECK DIGITE A AA A A ee ee ds 36 2 213 342 SET LENGTHS FOR STANDARD 2 OF O cia A A eo eng GE a a 37 2 14 UPC EAN SETTINGS o ooooooooooooooooooooo nooo o ooo 37 2 14 1 lt ENABLE DISABTE UPC EAN sii rask dre A wee A eee ieee a See 37 242 TRANSMIT EANL3 CHECK DIGIT sarasadkvkve ske ee sm a RR kle ati 38 Zoldy3gs TRANSMIT UPECSE CHECK DICTE ak he d krenker ea ia 38 24 oA TRANSMIT EAN 8 CHECK DIGIT sees AA ke SEE FR eee SE EE 38 24 5 TRANSMIT UPC A CHECK DIGIT sasoe negde sieaa Eee sense eek Ge kle A a 38 2140 TRANSMIT UPC NUMBER SYSTEM FOR UPC BE iii ska GSE Keke Se EGGE ee 39 Za Aela WECAA UR
19. active 2 15 2 GS1 DataBar 14 Check Digit Transmission GS1 DataBar 14 check digit transmitted GS1 DataBar 14 check digit not transmitted 2 15 3 GS1 DataBar 14 Linkage flag Transmission GS1 DataBar 14 Linkage Flag not transmitted GS1 DataBar 14 Linkage Flag transmitted 2 15 4 GS1 DataBar 14 Application ID Transmission GS1 DataBar 14 Application ID transmitted GS1 DataBar 14 Application ID not transmitted RoadRunners Evolution L 1D LA Laser Programming Guide v1 3 41 Data Capture ba racoda for Workforce Traceability in Motion 2 16
20. amming Guide v1 3 48
21. ch u Please note that the data recovering won t be possible if other barcodes have been scanned or if the scanner has been shut down after the upload RoadRunners Evolution L 1D amp LA Laser Programming Guide v1 3 12 Data Capture ba racoda for Workforce Traceability in Motion 1 5 The different connection methods There are two 2 different way to create a connection from a Host and a scanner Slave mode by default The Host PC BaracodaManager is creating the connection onto the scanner Master mode The scanner is creating itself a connection to the recorded Host Bluetooth address This connection attempt is set after a scan of barcode The configuration of Host address on which the scanner will set up a connection can be done o Via BaracodaManager software o Via scan of barcodes All usage mode Real Time No Data Loss Batch are obviously available on those two different ways of connection Enable master mode Disable master mode VTZ VT VTZ NUL SOH NUL FFAFF Enable master mode and disconnect Disable master mode and disconnect VTZ NUL VT VTZ NUL ST L SOH F The configuration of the Host Bluetooth address BDA is made by scanning the 0 9 a f A F labels Appendix 1 as on a calculator following the timestamp format shown above For example to set the following BDA
22. check digit not used Code 39 check digit modulo 43 checked and transmitted Code 39 check digit modulo 43 checked but not transmitted 2 8 6 Set lengths for Code 39 39 barcode length any barcode length minimum length 6 RoadRunners Evolution L 1D amp LA Laser Programming Guide v1 3 30 Data Capture ba racoda for Workforce Traceability in Motion 2 8 7 Italian PharmaCode settings Italian PharmaCode is based on Code39 encoding scheme thus its settings are Code39 settings Italian Pharmacode not active Italian Pharmacode act Code 39 Italian Pharmacode Enable A character transmission Code 39 Italian Pharmacode Disable A character transmission 2 9 Code 93 Settings
23. download section of Baracoda website registration is required http www baracoda com RoadRunners Evolution L 1D amp LA Laser Programming Guide v1 3 5 Data Capture ba racoda for Workforce Traceability in Motion 1 General Configuration Leds General default settings The reading of the Reset to factory settings label turns all the parameters of the scanner back to default settings and switches it off eset to factory settin RoadRunners Evolution L 1D amp LA Laser Programming Guide v1 3 6 Data Capture ba racoda for Workforce Traceability in Motion 1 2 Baracoda advanced features 1 2 1 Switch on delay In order to switch on the scanner in its standard mode you should just press the trigger You can set up the scanner to be switched on only after keeping the trigger pressed for two 2 seconds by reading the appropriate barcode Switch on delay 2 seconds Switch on delay O second 1 2 2 Shutdown timers There are two different shutdown timers When connected timer delay between the last scanned barcode and the switch off when the scanner is connected to a host Not connected timer delay between the last scanned barcode and the switch off when the scanner is not connected to any host It is possible to set those timers to re N il case the scanner ie a all the time ON own timers to infin By default tim
24. ee E eng 2 2 0 CODE TL SETTINGS iure a NE Tee Sea G a ear AES 28 Prada ENABLE DESABER CODE MN A A ias dea 28 2el e2a CODE LL CHECK D GITOS VERIFTGATION ea e E A AA AA A ANA 28 La leas TRANSMIT CODE UL CHECRADICITAS A A A Sed 28 2 7 4 SET LENGTE POR CODE LL sexy AR A gate glade a We ob ahead G re DAS GA 28 2 28 CODE 39 SETTINGS srp Eann da E a a mwas eee 29 25821 ENABER DISABLE CODE Ba ede de anes id ard ae 29 28 2 ENABLE DISABLE CODE 39 FULL ASCII inca a a 29 2 843 CODE 39 START STOP CHARACTERS sj acre Suede A a a 29 2 84 ACCEPTED CODE 39 CHARACTERS ara a re a Ne 30 2 8600 CODE 39 CHECK DIGIT VERIFICATION imei ie ai aniar A A a ree aw es 30 RoadRunners Evolution L 1D amp LA Laser Programming Guide v1 3 2 Data Capture ba racoda for Workforce Traceability in Motion 2 Ds CORT LENGIHS FOR CODE e A a ti nando ene ALS a 8 30 2 8 1 ITALTAN PRARMACODE SETTINGS Sia a y RS eo aoa wl pi in ae Rise Geddes 31 2 9 CODE 93 SETTINGS ia dots ice Sees eevee Bib eg O Se bee atte ee eae ee 31 229 1 BNABLE DISABLE CODE 93 vasse meaa a Ve beid Bares Sere Ge ee kb Ge aed vere ie ad da ea ei 31 29524 SET LENGTHS FOR CODE 93 is tang Sock terra Ea Re a O avid ia A AA ae 31 2 10 CODE 128 SETTINGS exorcista ee ete 32 2 10 13 ENABLE DISABLE CODE 128 EAN 128 kiaat do iaa e eee 32 2 102 SET LENGTHS FOR CODE 128 EAN 128 se sp
25. ers value are When connected timer 20 minutes Not connected timer 10 minutes hutdown timers to defaults Sets 1 2 3 Turn scanner OFF To turn off the scanner read the following barcode Turn off scanner RoadRunners Evolution L 1D amp LA Laser Programming Guide v1 3 7 Data Capture ba racoda for Workforce Traceability in Motion 1 2 4 No data loss mode and Baracoda Header Baracoda header It is a proprietary data encapsulation It is necessary to activate it to use the Baracoda keyboard emulation Kemul and Terminal The Baracoda header is enabled in default settings No data loss mode Baracoda has developed a proprietary communication protocol in order to enhance the security of the Bluetooth transmission Every barcode sent to the host must be acknowledged by the host until then the scanner will transmit it again and again This acknowledgment is disabled in default settings It is strongly recommended to set this protocol acknowledgment on when using the scanner with the BaracodaManager Enable Baracoda header No Data loss mode ON Enable Baracoda header No Data loss mode OFF Disable Baracoda header No data loss mode OFF In Trigger mode pressing the trigger will activate the beam Led Reading Mode Trigger The Aiming trigger mode has been developed for users who need to scan barcodes very close one to another and they have to be sure
26. le Code 39 scan the appropriate barcode below Enable Disable 2 8 2 Enable Disable Code 39 Full ASCII Code 39 format standard 43 characters Wi e 39 format full ASCII 2 8 3 Code 39 Start stop characters Code 39 start stop not transmitted e 39 start stop transmitted RoadRunners Evolution L 1D amp LA Laser Programming Guide v1 3 29 Data Capture ba racoda for Workforce Traceability in Motion 2 8 4 Accepted Code 39 characters Code 39 start stop accepted characters only standard Code 39 Code 39 start stop accepted characters only Trioptic Code 3 Code 39 start stop accepted characters and standard and Trioptic Code 3 2 8 5 Code 39 Check Digit Verification Code 39
27. length label Read intermediary label Corresponding to the next digit to set for the length see Appendix 1 5 digits max Read END of config label Programming procedure for set barcode length option RoadRunners Evolution L 1D amp LA Laser Programming Guide v1 3 23 Data Capture ba racoda for Workforce Traceability in Motion Set barcode length 2 4 Voting Standard voting set is two 2 This means that a barcode is considered read by the decoder if the same data is decoded twice Changing this parameter will enable a stronger security on the decoding of the barcode Voting 2 Voting 3 Voting 4 RoadRunners Evolution L 1D amp LA Laser Programming Guide v1 3 24 Data Capture ba racoda for Workforce Traceability in Motion 2 5 Min Max length per symbology The following is a procedure to follow for every barcode symbology The decoder offers the possibility to limit the reading of a barcode to a minimum and a maximum length if it is fo one given symbology type START Read Start Set min Max length label Read intermediary label from the below table to select the desired symbology to configure Read intermediary label Corresponding to the next digit of the min Max length value to apply as on a calculator
28. nsmitted RoadRunners Evolution L 1D amp LA Laser Programming Guide v1 3 35 Data Capture ba racoda for Workforce Traceability in Motion 2 12 3 Set lengths for MSI MSI Code barcode length any length MSI Code barcode length minimum length 6 UMN 2 13 Standard 2 of 5 Settings 2 13 1 Enable Disable Standard 2 of 5 To enable or disable Standard 2 of 5 code scan the appropriate barcode below andard 2 of 5 not act Standard 2 of 5 active 2 13 2 Standard 2 of 5 Check Digit Standard 2 of 5 check digit mod 10 not used tandard 2 of 5 check digit mod 10 checked and transmitted Standard 2 of 5 check digit mod 10 checked but not transmitted
29. ode BATCH MODE Forces the RoadRunners Evolution in Batch mode Erases all codes in memory When in batch mode the scanner will wait for the appropriate command in order to start uploading the barcodes this command can come e from the BaracodaManager e from reading the Upload batch data barcode here after If this barcode is read when the reader is in batch mode and connected the reader will automatically upload to the host all the data in its memory If not in batch mode or not connected the scanner will ignore this barcode Upload batch data with No Data Loss on When scanning this barcode the scanner will send a message to the host meaning that it wants to upload its data Following this the host will launch the upload process and grab the batch data If the host application has received all the expected data it will acknowledge the upload to the scanner which will erase the data from its memory If not the host application will send a negative acknowledgment message to the scanner which will keep the data in memory ready to retry an upload If the data transfer has been successful the scanner has received the acknowledgment and erased its memory and for any reason the user gets to realize that data has been lost at a higher level keyboard emulation for example it still has the possibility to recover the last batch data into the scanner s memory by scanning the below barcode estore last batch e last batch laun
30. ode the barcode can read up to 10 000 barcodes UPC format and store them into its non volatile memory for later transmission to the host When the internal memory is full both Leds will be full orange no blinking To upload barcodes from the scanner connect it to the host computer via Bluetooth The BaracodaManager software is used to configure the location where the barcodes are sent once the barcodes are extracted from the scanner Once connected the scanner will wait for the appropriate command in order to start uploading the barcodes this command can come from e The BaracodaManager The user has to click on the button Upload e A configuration scan barcode the user has to read the appropriate configuration barcode Be aware that with BaracodaManager two 2 different ways to upload barcodes are possible e To an application window In this case always double check before starting the upload procedure that the cursor in your text window is active Otherwise you will loose all the data saved into your scanner e To a txt file default option The BaracodaManager gives you the possibility to modify the name of the file in which you may want to save the data RoadRunners Evolution L 1D amp LA Laser Programming Guide v1 3 10 Data Capture ba racoda for Workforce E in Motion Traceability 1 4 1 Real Time mode Erases all captured data stored in memory and forces the scanner in Real time mode No other set
31. on 4 APPENDIX 2 AIM symbology identifiers structure The SI prefix is a two 2 or three 3 character string cm where Sl indicator c Symbology Identification m Modifier characters optional Symbology Character Code 39 Telepen Code 128 Code One EAN UPC Codabar Code 93 Code 11 ITF 25 Code 16K PDF417 MSI code Anker Code Codablock Plessey Code Straight 2 of 5 two bar start stop codes Straight 2 of 5 three bar start stop codes Code 49 Other Bar code Non Barcode data A B C D E F G H K L M N O P R S T X Z Modifier Characters The modifier character is determined by summing the option values of each symbology If the sum is greater than 9 use A B C D E F in the place of 10 11 12 13 14 and 15 Code 39 Option Values 0 No check character or Full ASCII 1 Reader has performed mod 43 check 2 Reader has performed mod 43 check and stripped the check character 4 Reader has performed Full ASCII conversion Telepen Option Values 0 Full ASCII mode 1 Double density numeric mode 2 Double density numeric followed by full ASCII 4 Full ASCII followed by double density numeric Code 128 Option Values 0 Standard 1 Function code 1 in first character position 2 Function code 2 in second character position 4 Concatenation according to ISBT specification has been performed and concatenated data follows RoadRunners Evolution L 1D amp LA Laser Progr
32. ot transmitted UPC EAN ISSN ISBN ISSN hyphen transmitted UPC EAN ISSN ISBN ISSN price code not transmitted UPC EAN ISSN ISBN ISSN price code transmitted 2 14 9 Add on digits settings UPC EAN Add on digits 2 digit add ons not active UPC EAN Add on digits 2 digit add ons active PC EAN Add on digits 5 digit add ons not active UPC EAN Add on digits 5 digit add ons not active UPC EAN Add on digits not required but transmitted if read UPC EAN Add on digits required and transmitted RoadRunners Evolution L 1D amp LA Laser Programming Guide v1 3 40 Data Capture ba racoda for Workforce Traceability in Motion 2 15 GS1 DataBar RSS 14 Settings 2 15 1 Enable Disable GS1 DataBar 14 GS1 DataBar 14 active GS1 DataBar 14 not
33. pheral START Read Set BT name label Read intermediary label Corresponding to the next character to set for the BT Name from Appendix 1 7 Read END of config label Programming procedure for Set Bluetooth Name t BT Nam of config RoadRunners Evolution L 1D amp LA Laser Programming Guide v1 3 15 Data Capture ba racoda for Workforce Traceability in Motion 1 7 2 Sniff period settings Change the Sniff period If the higher is the latency and the smaller is the power consumption Default value is 150ms niff period 150m eriod 100m Sniff period 200m niff period 300 Sniff period 500m RoadRunners Evolution L 1D amp LA Laser Programming Guide v1 3 16 Data Capture ba racoda for Workforce Traceability in Motion LTS Security code PIN settings Some Bluetooth device will not accept connections with devices that do not have a security code Disable BT security code nable BT security code 1 7 4 RF Power emission settings For regulation purposes some countries may limit the RF power emission to 10dBm Class2
34. r Codabar Any length code length Min RoadRunners Evolution L 1D amp LA Laser Programming Guide v1 3 27 Data Capture ba racoda for Workforce Traceability in Motion 2 7 Code 11 Settings 2 7 1 Enable Disable Code 11 To enable or disable Code 11 scan the appropriate barcode below Code 11 not active C active ode 11 2 7 2 Code 11 check digit s verification 1 digit 2 digits 2 7 3 Transmit Code 11 check digit s This feature selects whether or not to transmit the Code 11 check digit s Check and transmitted Enable Check but not transmitted Disable 2 7 4 Set Length for Code 11 This features check the length of the barcode Code 11 barcode length any length e 11 barcode length Min RoadRunners Evolution L 1D amp LA Laser Programming Guide v1 3 28 Data Capture ba racoda for Workforce Traceability in Motion 2 8 Code 39 settings 2 8 1 Enable Disable Code 39 To enable or disab
35. re for Workforce in Motion baracoda Traceability 3 APPENDIX 1 ASCII Table A Z 9 punctuation Control characters Capital letters A Z Name A Programming label Name Programming label a z 0 RoadRunners Evolution L 1D LA Laser Programming Guide v1 3 43 baracoda Traceability Small letters a z Name Programming label Name n Data Capture for Workforce in Motion Programming label RoadRunners Evolution L 1D LA Laser Programming Guide v1 3 44 baracoda Name Space Traceability Ponctuation Programming label MORE A R NA AE Data Capture for Workforce in Motion Programming label RoadRunners Evolution L 1D LA Laser Programming Guide v1 3 45 Data Capture ba racoda for Workforce Traceability in Motion Decimal numbers 0 9 Name Programming label RoadRunners Evolution L 1D amp LA Laser Programming Guide v1 3 46 Data Capture ba racoda for Workforce Traceability in Motion Control Characters Name Programming label RoadRunners Evolution L 1D amp LA Laser Programming Guide v1 3 47 Data Capture ba racoda for Workforce Traceability in Moti
36. the possibility to replace this character by any other of the user s choice Enable GS transmission Read define GS label Read intermediary label Corresponding to the next character to set for the replacing data of GS Finished Read END of config label Define GS replacement character IES End of configuration The most common request to replace GS by the pipe can be done through the scan of Define RoadRunners Evolution L 1D amp LA Laser Programming Guide v1 3 33 Data Capture ba racoda for Workforce Traceability in Motion 2 10 4 Enable Disable AIM ID Transmission Even if the AIM ID transmit is disabled it is possible to enable the AIM ID transmission for EAN128 Enable AIM ID transmission for EAN128 Disable AIM ID transmission for EAN128 2 11 Interleaved 2 of 5 Settings 2 11 1 Enable Disable Interleaved 2 of 5 To enable or disable Interleaved 2 of 5 scan the appropriate barcode below Interleaved 2 of 5 active 2 11 2 Interleaved 2of 5 Check Digit Interleaved 2 of 5 not act
37. ting is changed Important reminder if an ACK beep or buffer is needed the scanner must be set in the no data loss mode first Enable Real Time with No Data Loss mode Enable Real Time without No Data Loss mode 1 4 2 No Data Loss mode Enable ACK beep Forces the scanner in Real Time mode with data acknowledgement Erases all captured data stored in memory The scanner should have been previously set in the No data loss mode ON So scan the Enable Real Time with No Data Loss mode barcode before Enable ACK beep 1 4 3 No Data Loss mode Disable ACK beep Forces the scanner in Real Time mode without data acknowledgement Erases all captured data stored in memory The scanner should have been previously set in the No data loss mode ON So scan the Enable Real Time with No Data Loss mode barcode before Disable ACK bee 1 4 4 Real Time Buffered data option It s possible to set the scanner in Real Time with No Data Loss mode but with no bufferisation buffer configured to 0 when it s not connected In this particular situation the trigger will not activate the beam so impossible to read barcodes in this mode and Both LEDs blinks orange Max Buffered Barcodes 0 RoadRunners Evolution L 1D amp LA Laser Programming Guide v1 3 11 Data Capture ba racoda for Workforce Traceability in Motion Max Buffered Barcodes MAX 1 4 5 Batch m
38. to always read the correct one Once in this mode in order to read a barcode user will have to press the trigger twice Pressing it the first time will switch on the beam but will not switch on the decoder thus allowing user to aim at the correct barcode while pressing the trigger the second time will activate the decoder thus allowing the scanner to actually decode the barcode Aiming Trigger Mode RoadRunners Evolution L 1D amp LA Laser Programming Guide v1 3 8 Data Capture ba racoda for Workforce Traceability in Motion In Autoscan mode the scan beam is continuously on This mode enables to scan continuously Autoscan In Smart Autoscan mode for a battery power consumption optimisation issue the scanner will be continuously flashing Smart Autoscan The No duplicate scan option has been developed for users who do not want to scan the same barcode twice no duplicate scans disabled no duplicate scans enabled error signal gt If the same barcode is scanned an error signal is played two beeps lower tone and a red enlightening of the led no duplicate scans enabled no decoding gt If the same barcode is trying to be scanned it won t be The laser beam will still be enlightening

Download Pdf Manuals

image

Related Search

Related Contents

  Remington HC5550  Plantronics Blackwire C620  BEDIENUNGSANLEITUNG  NOMEX Multimeter  SDI 1080P Shuttle & License Plate Camera  N928 Installation Instructions  HiPerCam®_2 - ELTEC Elektronik AG  OPERATIONAL MANUAL - Test and Measurement  Edu.Dex User Manual  

Copyright © All rights reserved.
Failed to retrieve file