Actiontec electronic PCMCIA Network Router User Manual
Contents
1. Display a list of the known drivers for this device so that choose a specific iver lt Back Conc 25 4 Installing the Driver Software 11 When the next window appears select Specify a location then click Next Upgrade Device Driver Wizard Locate Driver Files Where do you want Windows to search for driver files 12 When the next window appears insert the DataLink Installation CD in the CD ROM drive of the computer 13 Enter X Drivers WindXP2k in the Copy manufacturer s files from text box where X is the drive letter of the CD ROM drive Upgrade Device Driver Wizard 26 DataLink V 90 PCMCIA Fax Modem 14 In the next window click Next Upgrade Device Driver Wizard Driver Files Search Results The wizard has finished searching for driver files for your hardware device S The wizard found a driver for the following device Actiontec 56k PCMCIA Fax Modem Windows found a driver that is a closer match for this device than your current driver To install the driver Windows found click Next AY d E drivers wingp2k mdmatex inf The wizard also found other drivers that are suitable for this device To view a list of these drivers or install one of these drivers select the following check box and then click Next Install one of the other drivers 15 The Digital Signature Not Found window appears Read the warning then click Yes2. Digital Signature Not Found X The Microsoft digital signature affirms that software has been tested with Windows and that the software has not been altered since it was tested The software you are about to install does not contain a Microsoft digital signature Therefore there is no guarantee that this software works correctly with Windows Actiontec 56k PCMCIA Fax Modem If you want to search for Microsoft digitally signed software visit the Windows Update Web site at http windowsupdate microsoft com to see if one is available Do you want to continue the installation No More Info 27 4 Installing the Driver Software 16 The last Upgrade Device Driver Wizard window appears Click Finish The driver software is installed Upgrade Device Driver Wizard Completing the Upgrade Device Driver Wizard 3 Actiontec 56k PCMCIA Fax Modem Windows has finished installing the software for this device To close this wizard click Finish lt Back canca Note To verify the driver software installed correctly return to the Device Manager and locate Actiontec 56k PCMCIA Fax Modem Double click the icon and in the Driver tab view the driver information Next go to chapter 5 Installing the Communications Software 28 DataLink V 90 PCMCIA Fax Modem Windows XP To load the Modem s software drivers onto a computer running Windows XP 1 Insert the
3. Preferences i Dialing from New Location Use Dialing Properties to modify how your calls are dialed Dialing Properties Close Cancel 5 The Install New Modem window appears Ensure the check box is not checked then click Next Install New Modem Windows NT will now try to detect your modem Before continuing you should 1 If the modem is attached to your computer make sure it is turned on 2 Quit any programs that may be using the modem Click Next when you are ready to continue lt Back Cancel 21 4 Installing the Driver Software 6 In the next Install New Modem window Windows detects the Modem as a Standard Modem Click Change Install New Modem The following modem was found on COM2 Standard Modem If this modem type is not correct click Change to select a different type from a list Change 7 Insert the DataLink Installation CD in the computer s CD ROM drive then click Have Disk Install New Modem x BY Click the manufacturer and model of your modem If your modem is not listed if you have an installation disk click Have Disk Manufacturers Models Standard Modem Types Standard 300 bps Modem VoiceView Modem Types Standard 1200 bps Modem Standard 2400 bps Modem hd b Standard 9600 bps Modem Standard 14400 bps Modem Standard 19200 bps Mod
4. and model of your hardware device If you have a disk that contains the updated driver click Have Disk To install the updated driver click Finish Models ActionT ec DataLink 90 Fax Modem LK Show compatible hardware Have Disk C Show all hardware Cancel 5 Inthe next window Windows locates the driver software Click Next 6 When the last window appears click Finish The driver software is loaded Next go to chapter 5 Installing the Communications Software 18 DataLink V 90 PCMCIA Fax Modem Windows Me To load the Modem s software drivers onto a computer running Windows Me 1 2 UJ 4 5 Turn on the computer Insert the DataLink Installation CD into the computer s CD ROM drive Insert the Modem into the computer s PCMCIA slot The Add New Hardware Wizard window appears Select Automatic search for a better driver Recommended then click Next Add New Hardware Wizard Windows has found the following new hardware PCMCIA 56K V 90 Fax Modem LK Windows can automatically search for and install software that supports your hardware If your hardware came with installation media insert it now and click Next What would you like to do Specify the location of the driver Advanced The Select Other Driver window appears Select the driver software located in the WIN9XME directory then click OK Select Other Driver xj Wind
5. 2 Insert the DataLink Installation CD into the computer s CD ROM drive 3 Insert the Modem into the computer s PCMCIA slot 4 The Add New Hardware Wizard window appears Click Next Add New Hardware Wizard This wizard searches for new drivers for PCMCIA 56K V 80 Fax Modem LK device driver is a software program that makes a hardware device work lt Back 15 4 Installing the Driver Software 5 When the next Add New Hardware Wizard window appears select Search for the best driver for your device Recommended then click Next Add New Hardware Wizard What do you want Windows to do Display a list of all the drivers in a specific location so you can select the driver you want lt Back 6 In the next window click the CD ROM drive check box then click Next 7 Windows locates the driver software Click Next If a Can t Find Driver error appears see Alternate Windows 98 Installation for an alternate installation procedure Add New Hardware Wizard Windows driver file search for the device ActionTec DataLink 90 Fax Modem LK Windows is now ready to install the best driver for this device Click Back to select a different driver or click Next to continue Location of driver cds ANMDMATLC INF gt gt P Cancel 8 In the next window click Finish The driver software is installed Ne
6. COM 2 the preferred COM port for a Windows NT 4 0 installation is available for the Modem to use Actiontec recommends disabling COM 2 throughout the System BIOS Setup routine To do this 1 2 3 4 See the computer s documentation for instructions to run BIOS Setup Once BIOS Setup is running locate the Integrated Peripherals section Locate the COM 2 or COM Port entry and disable it Save the settings before exiting The computer is configured to use the Modem Next go to chapter 3 Installing the Modem to continue installing and configuring the Modem 2 Before You Begin Installing the Modem The Modem is a Type II PCMCIA card and installs in a Type II or Type 68 pin PCMCIA slot Notebook computers usually have PC Card slots located on the side of the computer To install the Modem slide it gently into the slot with the label facing up Press firmly until the Modem is seated completely in the slot If the slot openings are recessed it may be difficult to insert the Modem correctly When the Modem is properly installed it clicks into place especially in newer notebook computers The figure below shows the Modem being installed into a typical notebook computer 3 Installing the Modem The Modem comes with its own dedicated phone cable This cable has a standard RJ 11 connector on one end for the phone line and a special connector that fits into the Modem on the ot
7. HIRD PERSON S MISUSE NEGLECT IMPROPER INSTALLATION OR TESTING UNAUTHORIZED ATTEMPT TO OPEN REPAIR OR MODIFY THE PRODUCT OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE OR BY ACCIDENT FIRE LIGHTNING OTHER HAZARDS OR ACTS OF GOD LIMITATION OF LIABILITY TO THE FULL EXTENT ALLOWED BY LAW ACTIONTEC ELECTRONICS ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY WHETHER BASED IN CONTRACT OR TORT INCLUDING NEGLIGENCE FOR INCIDENTAL CONSEQUENTIAL INDIRECT SPECIAL OR PUNITIVE DAMAGES OF ANY KIND OR FOR LOSS OF REVENUE OR PROFITS LOSS OF BUSINESS LOSS OF INFORMATION OR DATA OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE INSTALLATION MAINTENANCE USE PERFORMANCE FAILURE OR INTERRUPTION OF ITS PRODUCT EVEN IF ACTIONTEC ELECTRONICS OR ITS AUTHORIZED RESELLER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES AND LIMITS ITS LIABILITY TO REPAIR REPLACEMENT OR REFUND OF THE PURCHASE PRICE PAID AT ACTIONTEC ELECTRONICS OPTION THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE 39 Limited Warranty Disclaimer Some countries states or provinces do not allow the exclusion or limita tion of implied warranties or the limitation of incidental or consequential damages for certain products supplied to consumers or the limitation of liability for personal injury so the above limitations and exclusions may be limited i
8. LLL _ DataLink V 90 PC Card Fax Modem User Guide Table of Contents Introduction Package Contents System Requirements Technical Support Before You Begin DOS and Windows 3 1x Windows 95 and 98 Windows NT 4 0 Installing the Modem Installing the Driver Software Windows 95 Windows 98 Windows Me Windows NT 4 0 Windows 2000 Windows XP Installing the Communcations Software Troubleshooting Uninstalling the Modem Problems and Solutions Limited Warranty 31 33 33 33 37 Table of Contents Introduction Thank you for purchasing the Actiontec DataLink V 90 PCMCIA Fax Modem The Modem offers notebook computer users the mobility and connectivity op tions only a PCMCIA modem can deliver Its small size and weight are a perfect match for the latest notebook computers The Modem supports both the K56flex and ITU T V 90 standards for connecting to the largest number of Internet Service Providers It also features automatic se lection of the best possible connection protocol Whether faxing sending e mail or connecting to the Internet the Actiontec DataLink V 90 PCMCIA Fax Modem delivers the connectivity solutions needed for today s fast paced environment Package Contents Actiontec DataLink V 90 PCMCIA Fax Modem Modem phone cable DataLink Installation CD System Requirements Computer with Type II or Type III PCMCIA PC Card slot MS DOS Microsoft Windows for Workgroups 3 11 Microsoft W
9. Modem into the computer s PCMCIA slot 2 Turn on the computer and while it boots up insert the DataLink Installa tion CD in the computer s CD ROM drive 3 A Found New Hardware window appears Select Install the software automatically Recommended then click Next Found New Hardware Wizard Welcome to the Found New Hardware Wizard This wizard helps you install software for Standard PCMCIA Card Modem If your hardware came with an installation CD lt gt or floppy disk insert it now What do you want the wizard to do Install from a list or specific location Advanced Click Next to continue lt Back Cancel 29 4 Installing the Driver Software 4 The driver software installs When the last Found New Hardware Wizard window appears click Finish The driver software is installed Found New Hardware Wizard Completing the Found New Hardware Wizard The wizard has finished installing the software for B Actiontec 56k PCMCIA Fax Modem Click Finish to close the wizard lt Back Cancel Next go to chapter 5 Installing the Communications Software 30 Installing the Communcations Software If the Modem came with a communications software package Actiontec recom mends using this software for the Modem The default installation parameters of the software are specially configured to work with the Modem and supports both data and fax modes To
10. The MS DOS Prompt window reappears At the prompt enter the following commands exactly as shown cd c windows inf lt enter gt rename oem0 inf oem20 inf rename bak inf lt enter gt exit lt enter gt The Modem and computer are now properly configured and ready to use 35 6 Troubleshooting Windows 95 OSR2 1 Eject the Modem from the computer 2 Select Start Settings Control Panel then double click Modems 3 Click Modem once to highlight then click Remove 4 Close the Control Panel window and return to the Desktop Do not reboot or restart the computer Select Start Programs then MS DOS Prompt 5 The MS DOS Prompt window appears At the prompt enter the fol lowing commands exactly as shown lt enter gt means press the Enter key on the keyboard Note If the Windows Directory is not named C Win dows substitute its new name in the entry below cd c windows inf lt enter gt rename inf bak lt enter gt cd c windows inf other lt enter gt rename inf bak lt enter gt exit lt enter gt 6 The MS DOS Prompt window closes Do not reboot or restart the computer Insert the Modem into the computer and perform the standard installation procedure see the Windows 95 section of chapter 4 Install ing the Driver Software 7 After installing the driver software select Start Programs then MS DOS Prompt The MS DOS Prompt window reappears At the
11. adapters 8 1 DVD CD ROM drives 19 99 Floppy disk controllers H Floppy disk drives 19 99 IDE ATA ATAPI controllers 9 98 Keyboards E Mice and other pointing devices 5 8 Modems 08 Standard PCMCIA Card Modem 188 Monitors 891 9 Other devices PCMCIA adapters 9 9 Ports COM amp LPT lt Sound video and game controllers System devices 9 6 Universal Serial Bus controllers 8 The Standard PCMCIA Card Modem Properties window appears Select Driver then click Update Driver Standard PCMCIA Card Modem Properties 24 DataLink V 90 PCMCIA Fax Modem 9 The first Upgrade Device Driver Wizard window appears Click Next Upgrade Device Driver Wizard Welcome to the Upgrade Device Driver Wizard This wizard helps you upgrade a device driver for a hardware device To continue click Next 10 In the next Upgrade Device Driver Wizard window select Search for a suitable driver for my device recommended then click Next Upgrade Device Driver Wizard 3 Install Hardware Device Drivers device driver is a software program that enables a hardware device to work with eg an operating system This wizard upgrades drivers for the following hardware device 2 Standard PCMCIA Card Modem Upgrading to newer version of a device driver may add functionality to or improve the performance of this device What do you want the wizard to do ges dedi
12. al conformance to its program specifica tions for a period of ninety 90 days from the date of purchase from Actiontec Electronics or its authorized reseller Actiontec Electronics warrants the media containing software against failure during the warranty period The only updates that will be provided are at the sole discretion of Actiontec Electronics and will only be available for download at the Actiontec Web site www actiontec com Actiontec Electronics sole obligation under this express warranty shall be at Actiontec Electronics option and expense to refund the purchase price paid by Customer for any defective software product or to replace any defective media with software which substantially conforms to applicable Actiontec Electronics published specifi cations Customer assumes responsibility for the selection of the appropriate appli cations program and associated reference materials Actiontec Electronics makes no warranty or representation that its software products will meet Customer s requirements or work in combination with any hardware or applications software products provided by third parties that the operation of the software products will be uninterrupted or error free or that all defects in the software products will be corrected For any third party products listed in the Actiontec Electronics software product documentation or specifications as being compatible Actiontec Electronics 37 Limited Warranty will
13. ble click PC Card 6 In the PCMCIA windows that appears select No No and then Finish The PCMCIA controller is reset 7 Select Start Settings Control Panel then double click PC Card The window that appears should state that socket 1 and socket 2 are empty 8 Reinstall and reconfigure the modem as explained in chapter 3 Installing The Modem and chapter 4 Installing the Driver Software Cannot Open COM Port Error If this error appears no COM ports available for the Modem to use To correct disable any unused COM ports listed in Windows Caution COM Port 1 COM 1 is usually required by the computer and should not be removed 1 Goto Start Settings Control Panel then double click System 2 Select Device Manager then double click Ports 3 1 should be listed If COM 2 3 or COM 4 are listed click the icon once to highlight then click Properties 4 When the Properties window appears uncheck Original Configuration Current Windows 95a or check Disable in this hardware profile Windows 95 OSR2 5 If another window appears select Yes then click OK A red X appears on the disabled COM port icon Windows 95 will not load the driver software from the Installation CD In rare instances Windows 95 identifies the Modem as new hardware but will not load the driver software from the Installation CD Instead it uses driver software from a previously
14. computer does not have Card and Socket Services the Point Enabler software must be installed This software provides MS DOS with the necessary drivers to interface with the Modem but the ability to hot swap the Modem is lost Point Enabler must be reinstalled whenever the Modem is removed To install Point Enabler 1 Insert the DataLink Installation CD included with the Modem into the computer s CD ROM drive 2 Find pmxfm exe and copy it to the root directory of the computer s default hard drive 2 Before You Begin 3 Torun Point Enabler enter the following at the DOS prompt pmxfm c x i y and then press the Enter key on the keyboard In the entry above x specifies the COM port number 1 4 and y specifies the Interrupt IRQ used 1 15 Using 3 for the COM port and 9 for the IRQ works in most computers 4 Oncethe driver software is loaded and working correctly add the entry to your autoexec bat file to run Point Enabler every time the computer is turned on Example pmxfm c 3 i 9 5 The config sys file may need to be modified to exclude an address range when using Point Enabler The two examples below show the most effective ranges and work with the majority of computers Example A shows the most common exclusion range Example B is an alternative if Example A does not work Add a line to your config sys file as follows Example A device c dos emm386 exe noems x d000 dfff Example B device c dos em
15. ed in chapter 2 Before You Begin was performed If the Modem was in stalled without following the pre installation procedure follow these instructions for Windows 95 and 98 only 1 Eject the Modem from the computer 2 Select Start Settings then Control Panel 3 In the Control Panel window double click Modems 4 Highlight the Modem then click Remove 5 Restart Windows and follow the pre installation procedure described in chapter 2 Before You Begin before attempting a reinstallation Problems and Solutions If the Modem has been reinstalled but it is still not functioning or Windows does not detect it select the symptom then follow the procedure These trouble shooting procedures will correct the majority of installation problems that may be encountered when using the Modem The Modem is not detected by Windows Usually this problem can be fixed by resetting the PCMCIA Socket con troller Before attempting this procedure uninstall the Modem using the Uninstalling the Modem procedure above 1 Select Start Settings Control Panel then double click System 33 6 Troubleshooting 2 Select Device Manager then click on the plus sign next to PCMCIA 3 Click on the icon to highlight then click Remove 4 Exit Device Manager and restart Windows 5 After booting up Windows should detect new hardware for the PCMCIA Socket if not select Start Settings Control Panel then dou
16. em Standard 28800 bps Modem Y OK 8 In the next window when prompted for the path to the files enter the drive letter of the CD ROM drive then click OK 22 DataLink V 90 PCMCIA Fax Modem 9 When prompted to select the the manufacturer and model of the Modem click OK then Next in the following window The driver software is installed Note To verify Windows has found the Modem select Start Settings Control Panel then Modems If dialing into a Windows NT Remote Access Server or connecting to the Internet Dial Up Networking must be configured properly See the Windows NT documentation for details Next go to chapter 5 Installing the Communications Software Windows 2000 To load the Modem s software drivers onto a computer running Windows 2000 1 Insert the Modem into the computer s PCMCIA slot 2 Turn on the computer 3 A Found New Hardware window appears stating that Windows has found a Standard PCMCIA Card Modem Found New Hardware 2 Standard PCMCIA Card Modem 4 Right click My Computer then select Properties from the pop up menu 5 Inthe System Properties window select Hardware then Device Manager 6 When the Device Manager window appears expand the Modems section by clicking on the plus sign 23 4 Installing the Driver Software 7 Double click Standard PCMCIA Card Modem Device Manager m Display
17. her end Insert the cable into the Modem as shown in the figure below AN A Caution Be careful not to push the computer against anything when the cable is in place This may bend the connector and damage the pins Keep the area around the com puter clear so the computer can move freely without damaging the cable or connector Next go to chapter 4 Installing the Driver Software to load the software used by the Modem onto the computer 10 Installing the Driver Software After installing the Modem the drivers software must be loaded onto the computer Select the operating system used then follow the instructions Windows 95 There are two version of Windows 95 95a and 95 OSR2 To discover which version is running on the computer select Start Settings Control Panel then double click System The version is displayed in the General tab If the ver sion is 4 00 950 or 4 00 950A use the Windows 95a procedure If the version is 4 00 950B use the Windows 95 OSR2 procedure Windows 95a To load the Modem s software drivers onto a computer running Windows 95a 1 Turn on the computer 2 Insert the Modem into the computer s PCMCIA slot 3 When Windows detects the new hardware the New Hardware Found window appears Select Driver from disk provided by hardware manu facturer then click OK New Hardware Found 2 S 56K 90 Fax Modem LK Select which driver you want to install for you
18. indows 3 1 95 98 Millennium Edition Me NT 4 0 2000 or XP 1 Introduction Technical Support Actiontec Electronics prides itself on making durable high quality high performance products If you need assistance the Actiontec Technical Support Department is available every day from 6 A M to 11 P M MST to provide professional support Actiontec Actiontec Electronics Inc 760 N Mary Avenue Sunnyvale CA 94085 Techinical Support Phone 719 884 8300 E mail techsupp actiontec com Web site www actiontec com support Before You Begin Before connecting the Modem select the operating system used and read the pre installation information DOS and Windows 3 1x Most portable computers include some form of Card and Socket Services This software enables the computer s internal PCMCIA controller to operate If Card and Socket Services are installed Windows 3 1 and Windows for Workgroups 3 11 do not require any special drivers to communicate with the Modem install the communications software to use the Modem If the version of the Modem purchased included communications software see chapter 5 Installing the Communications Software If unsure whether Card and Socket Services are installed insert the Modem If the computer beeps the Modem should be configured and ready to use If Card and Socket Services are not installed the Point Enabler software must be installed Installing Point Enabler If the
19. install the communications software on your computer 1 Insert the CD containing the communications sofware into the computer s CD ROM drive 2a If using Windows 3 1x select File Run enter the CD ROM drive letter followed by setup The software installs on the computer 2b If using Windows 95 or above double click My Computer double click the CD ROM icon then double click setup exe The software installs on the computer If another type of communications software is used ensure it supports the Modem Most software manufacturers have a listing of supported modems on their Web sites If unsure whether the software supports the Modem select Hayes Compatible or Standard Modem during the setup procedure Doing this may work in certain cases Some types of communications software allow manual input of parameters If this is the case see the table below which contains the data fax command standards supported Data TIA EIA 602 TIA EIA 578 for Class 1 Fax Init String AT amp F amp C1 amp D2W2 I Note Some programs must be configured to communicate with the Modem on the same COM port and or IRQ setting used by the Modem 31 5 Installing the Communcations Software 32 Troubleshooting This section lists some common problems that may occur while using the Modem and offers suggestions to solve them Uninstalling the Modem Before attempting any troubleshooting ensure the pre installation procedure outlin
20. installed device As a result the Modem will not work with Windows 95 programs such as Dial Up Networking but 34 1 DataLink V 90 PCMCIA Fax Modem will work with programs that access COM ports To solve this problem first ascertain which version of Windows 95 is running on the computer see the Window 95 section of chapter 4 Installing the Driver Software for more details Select the version and follow the instructions Windows 95a Eject the Modem from the computer 2 Select Start Settings Control Panel then double click Modems 3 Click Modem once to highlight then click Remove 4 Closethe Control Panel window and return to the Desktop Do not reboot or restart the computer Select Start Programs then MS DOS Prompt The MS DOS Prompt window appears At the prompt enter the fol lowing commands exactly as shown lt enter gt means press the Enter key on the keyboard LII Note If the Windows Directory is not named C Win dows substitute its new name in the entry below cd c windows inf lt enter gt rename inf bak lt enter gt exit lt enter gt 6 The MS DOS Prompt window closes Do not reboot or restart the system Insert the Modem into the computer and perform the standard installation procedure see the Windows 95 section of chapter 4 Install ing the Driver Software After installing the driver software select Start Programs then MS DOS Prompt
21. ited States Actiontec Electronics Inc 760 North Mary Avenue Sunnyvale CA 94085 Actiontec Electronics shall not be responsible for any software firmware informa tion memory data or Customer data contained in stored on or integrated with any products returned to Actiontec Electronics for repair whether under warranty or not 38 DataLink V 90 PCMCIA Fax Modem WARRANTIES EXCLUSIVE IF AN ACTIONTEC ELECTRONICS PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE CUSTOMER S SOLE REMEDY FOR BREACH OF THAT WARRANTY SHALL BE REPAIR REPLACEMENT OR REFUND OF THE PURCHASE PRICE PAID AT ACTIONTEC ELECTRONICS OPTION TO THE FULL EXTENT ALLOWED BY LAW THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES TERMS OR CONDITIONS EXPRESS OR IMPLIED EITHER IN FACT OR BY OPERATION OF LAW STATUTORY OR OTHERWISE INCLUDING WARRANTIES TERMS OR CONDITIONS OF MERCHANTABILITY FITNESS FOR A PARTICULAR PURPOSE SATISFACTORY QUALITY CORRESPONDENCE WITH DESCRIPTION AND NON INFRINGEMENT ALL OF WHICH ARE EXPRESSLY DISCLAIMED ACTIONTEC ELECTRONICS NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE INSTALLATION MAINTENANCE OR USE OF ITS PRODUCTS ACTIONTEC ELECTRONICS SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT OR MALFUNCTION IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY CUSTOMER S OR ANY T
22. m386 exe noems x c800 c8ff x d000 dfff Note Point Enabler is used for computers without Card and Socket Services software only Also Point Enabler operates in the DOS and Windows 3 1x environment exclusively Do not use Point Enabler with a Cardbus capable notebook computer or a computer running the Windows 95 or newer operating system The computer is configured to use the Modem Next go to chapter 3 Installing the Modem to continue installing and configuring the Modem DataLink V 90 PCMCIA Fax Modem Windows 95 and 98 If the Modem is the first PC Card purchased for the notebook computer ensure the computer s PCMCIA controller has been initialized and properly configured for Windows 95 and 98 by following these instructions 1 After booting up the computer select Start Settings then Control Panel 2 In the Control Panel window double click Card A properly installed PCMCIA controller causes the PC Card PCMCIA Properties window to appear Card PCMCIA Properties 12 x Socket Status Global Settings To remove a PC card select it from the list and then click Stop Empty Socket 2 Stop Show control on taskbar Display warming if card is removed before it is stopped Apply Cancel If the New Hardware Found window appears the computer s PCMCIA ports have not been configured Follow the installation instructions in the window and refe
23. make reasonable efforts to provide compatibility except where the non com patibility is caused by a bug or defect in the third party s product or from use of the software product not in accordance with Actiontec Electronics published specifications or user guide THIS ACTIONTEC ELECTRONICS PRODUCT MAY INCLUDE OR BE BUNDLED WITH THIRD PARTY SOFTWARE THE USE OF WHICH IS GOVERNED BY A SEPARATE END USER LICENSE AGREEMENT THIS ACTIONTEC ELECTRONICS WARRANTY DOES NOT APPLY TO SUCH THIRD PARTY SOFTWARE FOR THE APPLICABLE WARRANTY PLEASE REFER TO THE END USER LICENSE AGREEMENT GOVERNING THE USE OF SUCH SOFTWARE Obtaining Warranty Service Customer may contact Actiontec Electronics Technical Support Center within the applicable warranty period to obtain warranty service authorization Dated proof of purchase from Actiontec Electronics or its authorized reseller may be required Products returned to Actiontec Electronics must be pre authorized by Actiontec Electronics with a Return Merchandise Authorization RMA number marked on the outside of the package and sent prepaid and packaged appropriately for safe shipment and it is recommended that they be insured or sent by a method that provides for tracking of the package The repaired or replaced item will be shipped to Customer at Actiontec Electronics expense not later than thirty 30 days after Actiontec Electronics receives the defective product Return the product to In the Un
24. n their application to you When the implied warranties are not allowed to be excluded in their entirety they will be limited to the duration of the applicable written warranty This warranty gives you specific legal rights which may vary depending on local law Dispute Resolution The customer may contact the Director of Technical Support in the event the Customer is not satisfied with Actiontec Electronics response to the complaint In the event that the Customer is still not satisfied with the response of the Director of Technical Support the Customer is instructed to contact the Director of Marketing In the event that the Customer is still not satisfied with the response of the Director of Marketing the Customer is instructed to contact the Chief Financial Officer and or President Governing Law This Limited Warranty shall be governed by the laws of the State of California U S A excluding its conflicts of laws and principles and excluding the United Nations Convention on Contracts for the International Sale of Goods 40
25. nd click Next Update Device Driver Wizard This wizard will complete the installation of 56K 90 Fax Modem LK by searching your local drives network and Internet locations for the most current driver If you have a disk or CD ROM that came with this device insert it now It is recommended that you let Windows search for an updated driver To do this click Next to continue Back Cancel 4 Another Update Device Driver window appears After Windows has found the driver software for the Modem click the Finish button 5 If Windows asks for an installation disk click OK then Other Locations Select the CD ROM drive and click OK again The driver software is installed 13 4 Installing the Driver Software 6 To determine which COM port and IRQ are assigned to the Modem select Start Settings Control Panel Modems then Diagnostics Click COM Port then More Info to view the Modem s properties Modems Properties General Diagnostics Windows detected the following ports and has already installed the following devices fe COM1 No Modem Installed COM2 No Modem Installed ECUM3 ActionT ec DataLink 90 Fax Modem LK Driver More Info Help Next go to chapter 5 Installing the Communications Software 14 DataLink V 90 PCMCIA Fax Modem Windows 98 To load the Modem s software drivers onto a computer running Windows 98 1 Turn on the computer
26. ows has found more than one driver that may work for your hardware Please select the driver that matches your language and device LAMDMATEX INF 2 11 2002 LADRIVERSNWINSXMENMDMATEX INF 2 11 2002 L SDRIVERSSWINNTSMDMATEX INF 2 11 2002 Actiontec 56k PCMCIA L DRIVERS WINXP2K MDMATEX INF 2 11 2002 19 4 Installing the Driver Software 6 When the final Add New Hardware Wizard window appears click Finish The driver software is loaded Next go to chapter 5 Installing the Communications Software Add New Hardware Wizard a Actiontec 56k PCMCIA Fax Modem Windows has finished installing the software you selected that your new hardware device requires Cancel Windows 4 0 Before beginning this installation ensure that the COM 2 port has been disabled in the system BIOS and that the PCMCIA is set to boot and started as described in chapter 2 Before You Begin To load the Modem s software drivers onto a computer running Windows NT 4 0 1 Insert the Modem into the computer s PCMCIA slot 2 Turn on the computer 3 After the computer boots up select Start Settings Control Panel then Modems 20 DataLink V 90 PCMCIA Fax Modem 4 When the Modem Properties window appears click Add Modems Properties 21 x General e The following modems are set up on this computer Attached To Remove Properties Dialing
27. prompt enter the following commands exactly as shown cd c windows inf lt enter gt rename bak inf lt enter gt c windows inf other enter rename bak inf lt enter gt exit lt enter gt The Modem and computer are now properly configured and ready to use 36 Limited Warranty Hardware Actiontec Electronics Inc warrants to the end user Customer that this hardware product will be free from defects in workmanship and materials under normal use and service for twelve 12 months from the date of purchase from Actiontec Electronics or its authorized reseller Actiontec Electronics sole obligation under this express warranty shall be at Actiontec s option and expense to repair the defective product or part deliver to Customer an equivalent product or part to replace the defective item or if neither of the two foregoing options is reasonably available Actiontec Electronics may in its sole discretion refund to Customer the purchase price paid for the defective product All products that are replaced will become the property of Actiontec Electronics Inc Replacement products may be new or reconditioned Actiontec Electronics warrants any replaced or repaired product or part for ninety 90 days from shipment or the remainder of the initial warranty period whichever is longer Software Actiontec Electronics warrants to Customer that each software program licensed from it will perform in substanti
28. r new hardware Windo ult driver C Do not install a driver Windows will not prompt you again C Select from a list of alternate drivers 11 4 Installing the Driver Software 4 The Install From Disk window appears Insert the DataLink Installation CD in the CD ROM drive of the computer then click OK 5 If Windows asks for an installation disk click OK and enter the drive letter of the CD ROM drive in the Copy manufacturer s files from text box Click OK again The driver sofware is installed 6 To determine which COM port and IRQ are assigned to the Modem select Start Settings Control Panel Modems then Diagnostics Click COM Port then More Info to view the Modem s properties Modems Properties General Diagnostics Windows detected the following ports and has already installed the following devices fe COM1 No Modem Installed tCOM2 No Modem Installed COM3 ActionT ec DataLink V 90 Fax Modem LK Driver More Info Next go to chapter 5 Installing the Communications Software 12 DataLink V 90 PCMCIA Fax Modem Windows 95 OSR2 To load the Modem s software drivers onto a computer running Windows 95 OSR2 1 Turn on the computer 2 Insert the Modem into the computer s PCMCIA slot 3 Windows detects the Modem and the first Update Device Driver Wizard window appears Insert the DataLink Installation CD in the computer s CD ROM drive a
29. r to the computer s documentation for more information The computer is configured to use the Modem Next go to chpater 3 Installing the Modem to continue installing and configuring the Modem 2 Before You Begin Windows NT 4 0 To ensure the computer is configured to use the Modem the PCMCIA and COM 2 settings must be properly configured PCMCIA Settings 1 After booting up the computer select Start Settings then Control Panel 2 Inthe Control Panel window double click Devices 3 The Devices window appears In the list box scroll down and click Pemcia once to highlight If the PCMCIA device is set correctly Started and Boot should appear in the Status and Startup columns respectively Startup Close System Boot Start System Disabled Stop Disabled Disabled J Started Manual HW Profiles Remote Access ARP Service Started Automatic Remote Access Auto Connection Dri Started Automatic Device Status Started Automatic 4 Started 4 Ifthe PCMCIA device is not set to Boot and Started click Startup select Boot in the Device window then click OK Device Pcmcia Startup Type sm Automatic Help C Manual e C Disabled 5 Close the Devices window and restart the computer DataLink V 90 PCMCIA Fax Modem COM 2 Settings To ensure
30. xt go to chapter 5 Installing the Communications Software 16 DataLink V 90 PCMCIA Fax Modem Alternate Windows 98 Installation 1 If Windows does not find the Modem s driver software on the CD see step 7 in the previous procedure abort the process by clicking Back until the following window appears select Display a list of all the drivers in a specific location then click Next Add New Hardware Wizard What do you want Windows to do Search for the best driver for your device Recommended Display a list of all the drivers in a speciic lt Back Cancel 2 When the next window appears click Have Disk Add New Hardware Wizard Ae Select the manufacturer and model of your hardware device If you have a bs disk that contains the updated driver click Have Disk To install the updated driver click Finish Models Show compatible hardware Have Disk C Show all hardware Next Cancel 17 4 Installing the Driver Software 3 When the Install From Disk window appears ensure the DataLink Installation CD is inserted in the computer s CD ROM drive Verify that the drive letter of the CD ROM drive appears in the Copy manufacturer s files from list box then click OK 4 In the next window ensure ActionTec DataLink V 90 Fax Modem LK appears in the Models text box then click Next Add New Hardware Wizard Select the manufacturer
Download Pdf Manuals
Related Search