Home

Philips 42PF7621D User manual

1. delta volume digital audio language digital natural motion digital subtitle language digital teletext digital test reception digital TV DNR dual I II DV BoE DVD player DVD 44 DVI connector 46 48 dynamic 16 EPG equalizer euroconnector 44 45 49 factory 31 favourite channel list 32 features adjustment menu 20 fE TUN Eonia 27 first time installation 9 42 46 62 Downloaded From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina HDMI connector 46 61 42 headphone volume a 19 hearing impaired 24 home cinema amplifier aae s 15 39 installation 24 language preferences 24 light sensor ad location 229 manual installation 27 menu key MPEG 19 MPEG reduction multimedia browser m mute Key certet 6 navigate through the menus 12 on screen language 10 on screen information
2. 6 on timer 222 OK key 5 OPTION 7 um 48 picture adjustment menu 15 picture format 17 PIN COU ene 22 pixel plus censere titer 16 preferences menu 29 preferred audio language 24 preferred subtitle language 24 previous 6 programme title 29 quick access etta 7 radio channels rear panel overview rearrange channel list 28 record a TV programme 51 63 reinstall 228 remote control reset factory settings 31 reset to standard 14 28 1 28 safety 2 satellite receiver w 45 search for 27 select your connections 30 select connected equipment 51 set 22 settings assistant 211 side connectors 42 sharpness 15 sleeptimer n2 slideshow format se DT software upgrade 31 55 sound adjustment menu 18 standby 5 store channels 25 subtitles 20 surround mode seve 19
3. menu and press the cursor right Sleeptimer gt TV Menu is moved to the left Childlock 3 Select Features and press the cursor right Set Change code The Features menu is moved to the left panel On ti 4 Use the cursor up down to select the Features menu items 5 Press the cursor right to enter the selected Features menu item Info 6 Use the cursor keys to adjust the settings 7 Press the cursor left to return to the Features menu Subtitle This displays Teletext and DVB T subtitles from the selected TV channel These can be permanently displayed or only when mute is active The teletext subtitle page of analogue channels must be stored for each TV channel 1 Switch on teletext and select the proper subtitle page from the index 2 Switch off teletext 3 Select Subtitle On to display the subtitles on the selected TV channels On during mute to automatically display the subtitles only when the sound has been muted with the K key the remote control Tip this function is also accessible via the OPTION key on the remote control Digital subtitle language This allows you to temporarily select your preferred subtitle language out of the list of the broadcasted languages for the current programme Note to permanently change the subtitle languages use the Language menu in the Installation menu o Use the cursor up down to temporarily overrule your permanent language selection and confirm
4. 2584 3 en qxd 29 03 2007 10 48 Pagina d Annex 1 Continued EN Local software upgrade procedure New software or the currently installed software version can also be obtained from the www philips com support TV menu website Software upgrade 4 Go to www philips com support using the web browser Current softw info of your PC Local upgrades 2 Follow the procedure to find the information and the Manual network i software related to your TV 3 Select the latest software upgrade file and download it to you PC 4 Decompress the ZIP file Rename the resulting file autorun upg to for ex upgrade upg Move the renamed file to the subdirectory Upgrades Software upgrade Info Remark if there is no subdirectory Upgrades present please create one 5 Insert the portable memory that contains the downloaded software upgrade 6 Select Software Upgrade in the Installation menu Go to Local upgrades The TV will list all compatible software available on the USB portable memory and display the data for each selected upgrade version 7 Select the correct upgrade version and press the red colour key to start the upgrade Your TV will restart and will automatically go to the upgrade mode After a few seconds it will display the status of the upgrade procedure Warning if you try to upgrade to a software version equal or lower than the current version a confirmation will b
5. Select Time and press the cursor right o Enter the time with the cursor up down and right o Press the MENU BROWSE key to switch off the menu Channel lock to lock a certain TV channel or external o Press the OK key to activate deactivate Parental rating to set an age rating to a digital programme if the programme is parental rated The ratings applied are according the selected country in the initial installation Press the cursor right and select an age rating with the cursor up down Select Unlock to disable all locks you have set Important you have forgotten your code Select Change code and press the cursor right Enter the overriding code 8 8 8 8 Enter a new personal 4 digit code Confirm your new entered code The previous code is erased and the new code is stored vAWNS 21 Downloaded From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina Adjust feature menu settings Continued Set code Change code TV menu Features Features Sleeptimer Childlock Select Set or Change code Set Change code gt If no PIN code exists yet the menu item is set to Set code Follow the instructions on screen gt If a PIN code has previously been entered the menu item is set to Change code Follow the instructions on screen o Enter your code with the digit keys All number combinations from 0000 to 9999 are valid numbers gt Features menu reappears with a message con
6. 2584 3 en qxd 29 03 2007 10 48 Pagina d Annex 1 Continued Upgrade the TV software 1 Switch off your TV and remove all memory devices Software Upgrade Application 2 Insert the USB portable memory that contains the downloaded software upgrade Upgrade busy 3 Switch on your TV with the power key 1 at the side of the TV Software Id TLa2E 234 4 The upgrade process starts automatically After a few seconds the status of the upgrade procedure is displayed Loading Validating on Warning Programming You are not allowed to remove the USB portable memory during the software upgrade procedure In case of a power drop during the upgrade procedure don t remove the USB portable memory from the TV The TV will continue the upgrade as soon as the power comes back If an error occurs during the upgrade you should retry the procedure or contact your Local Customer Service Centre 5 When the message Operation successful appears remove the USB portable memory and restart your TV with the power switch 1 at the side of the TV Your TV will start up with the new software Note once the upgrade is finished use your PC to remove the TV software from your USB portable memory If you need further assistance or in case of problems please call your local Philips Customer Centre See Philips Consumer Care on the www philips com support website 56 Downloaded From TV Manual com Manuals
7. 2584 3 en qxd 29 03 2007 10 48 Pagina 1 About this User Manual EN This manual contains all information you will need to initially install and operate your new TV Also read the help texts which are being displayed at the bottom of the screen problem you can call your Local Philips Customer or Service Centre See the supplied Worldwide guarantee booklet Please have the Model and Product number which you can find at the back or the bottom of your television set or on the packaging ready before calling the Philips customer support service Model 42PF7621D 10 37PF7641D 10 42PF7641D 10 If this instruction manual does not give an answer or if Troubleshooting does not solve your TV ProductiNo iet Safety warnings 2 To make video and audio connections 41 Side panel overview 42 Getting started 3 Rear panel overview 43 Connect Use of the remote control RC4350 5 aVCR or DVD recorder 44 Use of the option key 7 two VCRs or VCR and DVD recorder 45 Keys at the right side of the TV 8 a satellite receiver ee 45 a DVD player HD receiver game console 46 Introduction Digital 8 a DVD player or HD receiver 46 Switch the TV eer emm mme 9 a DVD player sat receiver First time installation 9 or HD receiver ss eee esis ry Es 47 How to n
8. gt If the signal quality and strength is poor you try repositioning the aerial Tip it is however advisable to contact a specialised aerial installer in order to achieve the best results You can also directly enter the frequency of the digital channels you want to test 26 Downloaded From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina How to search for and store TV channels Continued EN Analogue manual installation TV menu Installation Channels This gives you the possibility to manually install tuning in channel by channel analogue channels Manual installation will not find nor store any DVB T digital channels Autom installation Installation update Timezone YMAR 1 Select Analogue manual installation and press the Analogue manual cursor right Rearrange Select System Select your country or part of the world where you are now located Select Search and press the cursor right Select the red or green colour key to proceed Info Tip if you know the frequency enter the 3 digits of the frequency with the digit keys 0 to 9 For example 049 6 Press the cursor left to store the channel found or to search for another channel 7 Select Fine tune and press the cursor right Fine tuning can be useful when the frequency has shifted a bit or when interference of another frequency occurs Adjust the frequency with the cursor up down in case of poor
9. tuned to that digital programes Record a TV programme You can record a TV programme using your recorders tuner without affecting your TV 1 Select the channel number on your recorder 2 Set your recorder to record See the handbook for your recorder Note when recording analogue progammes switching channel numbers on your TV does not disturb recording 51 Downloaded From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina Audio and video equipment keys Most of the audio and video equipment from our range of products can be operated with the remote control of your TV Press one of the keys after you pressed the SELECT key repeatedly according to the equipment you want to operate DVD STB TV VCR AUX with this remote control See Use of the remote control p 5 6 D to switch to standby for record 44 for rewind VCR CD search down DVD for stop gt for play for pause for fast forward VCR CD search up DVD to display information MENU BROWSE to switch the menu on or off P for chapter channel track selection 0 to 9 digit entry cursor up down to select the next or the previous disc CD cursor left right to select the previous or following track CD to select a DVD title chapter index AUX amp to select your choice of subtitle language DVD zii Notes If no action is being undertaken within 60 seconds the remote cont
10. 4 n case of a DVD player with analogue audio connect the audio cable to the DVD s audio L and R jacks and to the L R AUDIO jack of EXT3 Q 5 n case of a HD receiver and or a satellite receiver also connect the cable TV cable and or the satellite antenna cable 4 and the aerial Notes cables are often colour coded Connect red to red white to white etc the labels for the component video sockets may differ depending on the DVD player connected Although the abbreviations may vary the letters B and R stand for the blue and red component signals respectively and Y indicates the luminance signal Refer to the DVD player s instructions for use for definitions and connection details to get an optimal viewing it is advised to switch your equipment to the highest possible supported display modes Warning in case you notice scrolling images wrong colours or no colour no picture or even combinations of these on your screen verify if the connections are done in the correct way and if the resolution and the signal standard of the connected equipment are set in the right way See the handbook for your equipment 47 Downloaded From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina 48 an nC CIO Notes only a PC with digital sound can be connected to the HDMI connection if your PC does not have digital sound output connect your PC via a VGA connector before connecting your PC to
11. AUDIO R 3 S VHS quality with an S VHS camcorder is obtained by connecting the S VHS cables with the S VIDEO input 1 and AUDIO inputs Warning do not connect cable 1 and 2 at the same time This may cause picture distortion Headphone 1 Insert the plug into the headphone socket 7 as shown 2 The headphone impedance must be between 8 and 4000 Ohm The headphone socket has a 3 5 mm jack In the Sound menu select Headphone volume to adjust the headphone volume Tip Press on the remote control to switch off the internal loudspeakers of the TV USB See Multimedia browser p 35 42 Downloaded From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina 2b To make video and audio connections Rear panel overview DVD player G Satellite receiver HD receiver 1 DVD recorder 1 VCR 2 DVD recorders 2VCRs Decoder VCR o Decoder Decoder n og gt yom J nomi z IU antennae TTE G A AUDIO QUT A jJ Uawr Am A Analogue EN Home Cinema LEX DVD player ea ee HD receiver tan Chews AO amplifier e ga CREER Digital HD receiver kane Chemi amplifier Game console 43 Downloaded From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina 44 an Connect a VCR or DVD recorder Warning do not place your recorder too close to the scr
12. Also certain internet providers offer digital TV channels via broadband internet and a settop box Downloaded From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina 9 Switch the TV on EN Press the power switch 1 at the side of the TV or the 1 key on the remote control Note the first time and only the first time you switch on your TV you see a Welcome screen followed by the installation procedure See First time installation p 10 First time installation Downloaded From TV Manual com Manuals The installation procedure consists of a series of screens that will guide you through the installation of your TV Follow the instructions on screen Note if the TV has already been installed before and or you want to change the First time installation settings proceed with Use of the TV menu settings p 13 2584 3 en qxd 29 03 2007 10 48 Pagina First time installation Continued Step 1 select your on screen language After the Welcome screen you are asked to select a language of the TV s on screen menus The text of the header and the info on screen continuously change language Also the digital audio and subtitle language will be set to the selected menu language 1 Press the cursor up down to highlight your language 2 Press the OK key on the remote control 3 Follow the instructions on screen to proceed Step 2 complete the initial TV installation procedure 1 Press
13. Features menu 40 Downloaded From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina To make video and audio connections Tip use the inputs that are available on your equipment that provide the best video or audio performance as below Note your TV comes with all types of connectors with the exception of the DVI connector but some of your equipment may be equipped with this type In this case you ll need a DVI to HDMI adapter or a HDMI to DVI cable and separate audio cables all available at your local dealer Warning be sure to connect the DVI output connector first then connect to the HDMI input on your TV Best video performance Papen Ae Pa required HDMI High Definition Multimedia interface L R V H e e EXT3 AUDIO L R Component video Uni cama 480p 576p 720p o 480i 576i 1080i AUDIOL R B UT 750 RF Coaxial Notes cables are often colour coded to connectors Connect red to red white to white component video YPbPr connection is necessary to view video sources for example digital broadcastings coming from a settop box in 1080i 720p 576i 576p 480i or 480p 41 Downloaded From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina 42 an Camera Camcorder Game 1 Connect your camera camcorder or game as shown 2 Connect to VIDEO 2 and AUDIO L 3 for mono equipment For stereo equipment also connect
14. before you can access your files When using a USB portable harddisk Due to the high power consumption of the harddisk it is advised to use the external power supply of the portable harddisk to guarantee proper working under all conditions Digital Content Issues Only FAT DOS formatted initialized portable memory is supported Errors in this formatting can result in unreadable content If such problems appear try to re format the card Be aware that formatting the card will also delete all the content on it pictures music The maximum size of any multimedia file should never exceed 4Gbyte e Do not use a in folder naming If video streams are supporting multiple audio tracks the first audio track will automatically be selected the other audio tracks can t be selected External subtitle files e g DivX srt subtitle files are not supported 60 Downloaded From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina Annex 4 Issues referring to connected peripherals with a HDMI connector Note Teletext will not be available via equipment connected to a HDMI connector The HDMI IN connector allows the following TV and monitor display modes HD Standard Definition TV SDTV 640x480i 720x480i 720x576i Enhanced Definition TV EDTV 640x480p 720x480p 720x576p High Definition TV HDTV 1920x1080i 1280x720p PC VGA 640x480 SVGA 800 600 XGA 1024x768 Jf necessary yo
15. device Tip if your USB device does not fit into the USB connector at the side use an USB extend cable to connect the USB device to the USB port Ask your dealer for more information To insert a USB device Note USB devices are not supplied with this TV In case of a USB memory stick or a digital camera connect it to the USB connector at the side See To make video and audio connections Side panel overview p 42 When a USB device is inserted the Multimedia browser menu is displayed automatically See further To remove the USB device 1 Press the MENU BROWSE key on the remote control to switch off the main menu 2 Remove the USB device 35 Downloaded From TV Manual com Manuals USBDevice 1 Picture ondon 200 Picture e Beatle as2004 alb USBDevice 1 Picture London 2005 London2005 001 jpg 002 004 003 arnold o pic004 jpg USBDevice 1 Picture London2005 London2005 pic001 jpg pic001 jpg picos E pic004 j USBDevice 1 Picture London2005 London2005 pic001 jpg Press OK to play 36 Downloaded From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina Multimedia Browser Continued Multimedia Browser menu 1 Insert a USB device 2 Select the USB device under Multimedia with the cursor up down gt The Multimedia browser allows you to browse content stored
16. e zone Info TV menu Installation Languages Languages Menu language Preferred audio l Preferred subtitle Hearing impaired Info 24 Downloaded From TV Manual com Manuals Installation menu This menu will adjust settings related to the installation of the TV channels language and country and to the initial installation of your TV 1 Press the MENU BROWSE key on the remote control gt main menu appears 2 Select TV menu and press the cursor right gt Menu is moved to the left 3 Select Installation and press the cursor right gt Installation menu is moved to the left panel 4 Use the cursor up down to select the Installation menu items 5 Press the cursor right to enter the selected Installation menu item Use the cursor keys to make a selection Press the OK key to activate or to confirm 8 Press the cursor left to return to the Installation menu or press the MENU BROWSE key to switch off the menu Mo Select your language preferences This menu allows you to select your preferred language for menu audio and subtitle Menu language This allows you to select your menu language out of the list of the available languages Preferred audio language This allows you to select your audio language preference in case several languages are broadcasted Preferred subtitle language This allows you to select your subtitle language preference
17. in the memory or to assign a name to a channel or external for which a name has not yet been entered 1 Select the channel you want to rename 2 Press the red colour key on your remote control Rearrange JE 3 Select the characters with the cursor up down Select the following position with the cursor right Press the green colour key or the OK key when finished c A Notes Info press the yellow colour key to delete all characters The cursor is positioned at the beginning again press the blue colour key to delete the character the cursor is positioned Enter a new character with the cursor up down 0 name be given to the channel numbers 0 to 999 space numbers and other special characters are located between Z andA Rearrange 4 5 Select another channel number and repeat steps 2 to 5 Uninstall reinstall This allows you to uninstall a stored channel so that it is no Rename Uninstall Move Move longer possible to tune to This also allows you to reinstall up down an earlier uninstalled channel Select the channel you want to uninstall 2 Press the green colour key to uninstall the selected channel gt uninstalled channel is indicated in the list by an icon in front of the uninstalled channel 3 Press the green colour key again to reinstall the uninstalled channel Note uninstalled channels are not reinstalled during
18. key to erase settings and reset them to their default values Factory settings Info How to upgrade the TV software This allows you to upgrade your TV software using a USB device ii a Installation Software upgrade mU USB device upgrade Local upgrades It is possible to initiate an upgrade procedure from a USB device before you start up the TV The memory device must be filled with the appropriate upgrade image and structure which can be found on the www philips com support website How to upload a new software version on your memory device see Annex 1 Philips TV software upgrade with portable memory p 55 Automatic software announcement if present Announce t Info When you switch on your TV a message may appear that a new software upgrade is available o Press the red colour key on your remote control if you want to be reminded later on o Press the green colour key on your remote control to confirm you have read the message Once you have confirmed the message will not pop up again If however you want to see the last broadcasted announcement again select Announcement in the Software upgrade menu Note as long as the software upgrade has not been executed the message will be available 31 Downloaded From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina 2 Create your favourite list 0000 CANCEL All channels Q Chang
19. logo present a problem if they are bright and stationary Moving or low contrast graphics are less likely to cause uneven aging of the screen Do not insert the power plug in a wall socket Stock market stickers presented at the bottom of or hang the TV to the wall before all the TV screen connections are made Shopping channel logos and pricing displays bright and shown constantly or repeatedly in the same Place or hang the TV wherever you want but make location on the TV screen sure that air can circulate freely through the Examples of still pictures also include logos ventilation slots computer images time display teletext and images displayed in 4 3 mode static images or characters etc General Tip reduce contrast and brightness when viewing Carefully pay attention to these remarks Do not install the TV in a confined space such as a The warranty does not apply to damage book case or a similar unit caused by not taking into account the above To prevent any unsafe situations no naked flame mentioned warnings on stationary images sources such as lighted candles should be placed in the vicinity Avoid heat direct sunlight and exposure to rain or 3 water Electric Magnetic and Electromagnetic The equipment shall not be exposed to dripping or Fields splashing Philips Royal Electronics manufactures and sells many products targeted at consumers which like any Care of t
20. moved to the left 3 Select TV settings and press the cursor right gt The TV settings menu is moved to the left panel 4 Select Picture and press the cursor right gt The Picture menu is moved to the left panel Use the cursor up down to select the Picture menu items 6 Press the cursor right to enter the selected Picture menu item Picture Sound Info 5 Note all digital related menu items will only be accessible TV menu in case of digital TV broadcasting TV settings Picture Contrast 7 Use the cursor keys to adjust the settings Brightness 8 Press the cursor left to return to the Picture menu nc pi Contrast Sharpness Adjusts the intensity of bright parts in the picture but keep the dark parts unchanged Brightness Info Adjusts the light output of the complete picture which will mainly affect the darker areas of the picture Colour Adjusts the saturation level of the colours to suit your personal preference Hue Compensates for the colour variations in NTSC encoded transmissions Sharpness Adjusts the sharpness of fine details in the picture Tint Increases or decreases Warm red and Cool blue colours to suit personal preferences o Select Cool to give the white colours a blue Normal to give the white colours a neutral Warm to give the white colours a red tint Select Custom to make a customised setting in the Custom tint menu item 15 Downloade
21. on the inserted USB device gt 2 panel browser will be shown with the left panel containing the content types Music Pictures gt The right panel will display the content that is available of the selected content type Press the cursor right to enter the content Press the cursor up down to select a content Press the cursor right to enter the content Press the cursor up down to select a file or a directory Qv ur E te Note press the green colour key to display all the image files in the current directory as thumbnails when browsing pictures Press the green key again to display the image files in a list 7 In case a file is selected press the OK key to display a picture file or to play an audio file In case a directory album or playlist is selected press the cursor right to enter the content or press the OK key to start a slide show or a loop playback of the files present 8 Press the cursor left to keep music playing and switch back to the Multimedia menu 9 Press one of the colour keys on the remote control to perform the corresponding function mentioned at the bottom of the screen Tip the blue colour key can if necessary be used to let the colour keys reappear 10 To stop playing content press the Bl key on the remote control Notes your TV supports slide shows with background music See Annex 2 Philips TV slideshow format with background music p 58 the playback will continue to p
22. the TV select your PC monitor settings to a refresh frequency of 60 Hz supported PC monitor modes VGA 640 x 480 SVGA 800 x 600 XGA 1024 x 768 PC equipped with a DVI connector 1 Use a DVI to HDMI cable to connect to one of the HDMI connectors of your TV 1 2 Connect the audio cable 2 to the DIGITAL AUDIO IN connector of the TV 3 Select the equipment you have connected in the Installation menu Select your connections p 30 and link it to HDMI 1 or 2 4 Also select DIGITAL AUDIO IN in the same an Connections menu IU anfennanr sad Looman Vi a wooo a n no PC equipped with a VGA connector 1 Use aVGA to RGB H V cable 1 to connect to the RGB H V connectors of your TV 2 Connect the audio cable to the AUDIO R right and L left inputs of the TV 3 Select the equipment you have connected in the Installation menu Select your connections p 30 48 Downloaded From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina 49 an Connect a Home Cinema amplifier EN Digital Home Cinema amplifier Connect a digital Home Cinema amplifier to the DIGITAL AUDIO OUT connector 1 at the bottom of the TV Tip to avoid visible delay between picture and sound use this DIGITAL AUDIO OUT connector to connect your Home Cinema amplifier A Vt a aun ura woo Analogue Home Cinema amplifier According to the type of connector cables an
23. your dealer about Digital Video Broadcasting Terrestrial signal availability in your country No subtitles Under certain circumstances Digital text or interactive services may have priority UK ONLY over subtitles This can result in the subtitles not automatically reappearing when leaving Digital text or interactive services on a channel which is broadcasting subtitles In these cases subtitles can be initialised either by toggling the OPTION or the MENU key on the remote control or by changing channel 53 Downloaded From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina N Troubleshooting Continued Symptom Possible cause Remedy The remote does not function o Verify if the remote is set correctly for the equipment your are using o Verify if the batteries are not dead Replace the batteries You can still use the keys at the left side of the TV o Select TV mode on your remote control When pressing a key and some key leds are blinking with a higher speed and lower intensity than in a normal working condition and your TV does not react on the key press remove the batteries out of the remote control and put them back again The remote of connected equip ment does not function well o The infrared signals of the screen may influence the reception sensibility of other peripherals Solution replace the batteries of the remote of other peripheral equipment No photo o
24. Delta volume Auto surround Info Downloaded From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina sc Adjust sound menu settings Continued EN Dual I II Allows you to select per channel Dual I or II when dual sound transmission is available Mono Stereo Allows you to select per TV channel Mono or Stereo sound when stereo broadcasts are available Surround mode Allows you to select the modes for more spatial or surround sound reproduction dependent on the broadcasted signals or signals from external inputs received Headphone volume Allows you to control the level of sound through the headphones AVL Automatic Volume Leveler Automatically reduces the volume differences between channels and programmes providing a more constant overall level This will also reduce the dynamics of sound Delta volume Allows you to correct for any permanent volume differences between TV channels or external sources Auto surround When switched On this allows the TV to automatically switch to the best surround sound mode the broadcaster transmits 19 2584 3 en qxd 29 03 2007 10 48 Pagina Adjust feature menu settings The Features menu allows you to control the settings of special TV functions features and accessory equipments TV menu Features Subtitle 1 Press the MENU BROWSE key on the remote control Features gt The main menu appears 2 Select
25. TV If you have a digital camera with only internal memory no removable memory you can try to copy the content manually to a USB memory device using a personal computer Some digital cameras allow you to switch between PTP Picture Transfer Protocol or PC Link and USB Mass Storage Make sure that you select USB Mass Storage or PC Drive on your digital camera If your camera supports different interface settings be sure to try them one by one or contact the reseller of your camera to find out the correct setting USB Memory Device Issues Devices connected to the USB port of your TV must be Mass Storage Class compliant If your device digital camera MP3 player portable harddisk is not Mass Storage Class compliant it will not be detected by the content browser of the TV The following subsets of the Mass Storage Class specification are supported The implementation of the TV is based on the Universal Serial Bus Mass Storage Class Specification Overview v1 2 June 23 2003 including all documents referenced by the document The document can be found on the USB standardisation website www usb org Full support of the USB Mass Storage Class Bulk Only Transport bInterfaceProtocol 50h Full support of SubClass Code 05h SFF 8070i spec Full support of SubClass Code 06h SCSI transparent command set For large USB memory devices when you are in the Content Browser it may take a long time
26. TV settings and press the cursor right gt TV settings menu is moved to the left panel 4 Select Sound and press the cursor right The Sound menu is moved to the left panel 5 Use the cursor up down to select the Sound menu items Info 6 Press the cursor right to enter the selected Sound menu item Note dependent on the input signal one or more menu items may not be selectable 7 Use the cursor keys to adjust the settings 8 Press the cursor left to return to the Sound menu Equalizer Allows you to change the frequency response of the sound to match your personal taste Tip this function is also accessible via the OPTION key on the remote control Volume Allows you to adjust the sound output level Balance Allows you to adjust the output of the right and left speakers to obtain the best stereo reproduction for your listening position Digital audio language Allows you to select an audio language out of the list of the available broadcasted languages for the current digital programme Note if there is more than one variant for an audio language then select one of the variants To permanently change the audio language use the Language menu in the Installation menu Tip this function is also accessible via the OPTION key on the remote control 18 Downloaded From TV Manual com Manuals TV menu TV settings Sound Mono Stereo Surround mode Sound Headphone volume AVL
27. ables only 1 Connect the aerial cables 1 and 3 as og shown ur 2 Tune in your recorder s testsignal and store the testsignal under programme number 0 See Analogue manual installation p 27 See also the handbook of your recorder Connect a satellite receiver With a eurocable 1 Connect the aerial cables 1 and as shown 2 Connect your satellite receiver to EXT1 or 2 with a eurocable 3 3 Select the equipment you have connected the Installation menu Select your connections mn Comat 2 Va a Cir stow 30 and link it to 1 or 2 With Component Video connectors See Connect a DVD player a satellite receiver or a HD receiver p 47 45 Downloaded From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina 46 an Connect a DVD player HD receiver or game console Tip if necessary you can adjust the picture position to the centre of the screen with the cursor keys With a HDMI connector HDMI 1 2 is the leading new standard for Digital video Goins Janua Ianean Caran Ua aunor 7 audio interconnection 1 Connect your equipment with the HDMI connector 2 Select the equipment you have connected in the Installation menu Select your connections 30 and link it to HDMI 1 or 2 Note in case of any problems see Annex 4 Issues referring to connected peripherals with a HDMI
28. an installation update 28 Downloaded From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina 2d Set your preferences EN TV menu This menu contains items that can set or adjust various special TV functions and that will typically be accessed only occasionally Installation Preferences Location Teletext 2 5 OSD Select your location Programme title This allows you to select the location of your TV Panunna If you choose for Shop it will result in fixed settings of picture and sound The location Home will give full flexibility to change any predefined settings for picture and sound Into Select Teletext 2 5 Some broadcasters offer the opportunity to see more colours other background colours and nicer pictures in the teletext pages Select Teletext 2 5 On to take advantage of this feature Select Teletext 2 5 Off if you like the more neutral teletext layout The selection made is valid for all the channels which broadcast Teletext 2 5 Note it may take a few seconds before teletext broadcast switches over to Teletext 2 5 Select the On Screen Display OSD This allows you to select the display of the volume bar and a reduced or extended on screen display of programme and channel information Select Minimum to activate the display of reduced channel information o Select Normal to activate the display of extended channel and programme information For exam
29. ased on test recept the selected country Analogue manual gt All available digital and analogue TV and digital radio channels searched for and stored automatically This will take a few minutes gt When the search is complete the menu will indicate the number of digital and analogue channels found Rearrange Info 25 Downloaded From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina c How to search for and store TV channels Continued Installation update Installation Channels This allows you to automatically tune to and update all available digital channels without altering the sorting of existing channels For example the name of the channel is not altered Autom installation Installation update Digital test recept Analogue manual Notes Rearrange this will not reinstall uninstalled channels new channels found will not be added to any favourite list already installed channels will not be renumbered Geen Info Digital test reception only with digital TV broadcasting This allows you to see the quality and the strength of the signal reception for a digital frequency This enables you to find the antenna position that gives the best reception Select Digital test reception and press the cursor right You obtain an indication of the actual channel frequency the network name the signal quality and strength
30. avigate through the menus 12 er ees 48 a Home Cinema amplifier 49 Use of the TV menu settings 13 Use the Common Interface slot 50 Adjust picture menu settings 15 Select connected equipment 51 Adjust sound menu settings 18 Record with your recorder 51 Adjust feature menu settings 20 Audio and video equipment keys 52 Search for and store TV channels 24 Rearrange the channel number list 28 Troubleshooting 53 Set your preferences 29 Select your connections 30 Annex 1 Philips TV software upgrade Select a decoder channel number 30 with portable memory 55 Reset the factory settings 31 Annex 2 Philips TV Slideshow Format How to upgrade the TV software 31 with background music 58 Annex 3 Philips TV Digital camera Create your favourite list 32 and USB 60 EPG Electronic Programming Guide 33 Annex 4 Issues referring to connected Multimedia 35 peripherals with a HDMI connector 61 Teletext ieri bee epp 38 Index m ere hrs 62 Recycling e Rm IRR 63 Product information 63 1 Downloaded From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina 2 N Safety warnings TV channel
31. ayed about the selected programme to quit the display of detailed information press the blue colour key again 33 Downloaded From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina d EPG Electronic Programme Guide Continued 2 Press the green colour key on the remote control to watch listen to the selected programme currently on air 3 Press the red colour key to mark unmark a reminder on the selected programme You can set up to a maximum of 10 reminders gt The TV will wake up automatically or display a message when the programme is about to start Follow the instructions on screen to watch the programme 4 Press the yellow colour key to jump to the Next or the Previous day or back to Today 5 Press the MENU BROWSE key while Programme Guide is active to activate the Programme Guide main menu Use the cursor up down to highlight and select a menu item What s on allows you to browse through the programme guide information of your preferred EPG channels Search by genre allows you to search for the programmes according to a selected genre Scheduled reminders allows you to view and change the reminders you have set DVD STB TV VCR AUX Note the reminder s will wake up your TV from standby only if you switched off your TV with the O key on your remote control Preferred EPG channels are the channels from which the EPG data is currently being acquired This menu allow
32. connector p 61 Connect a DVD player or HD receiver Tip if necessary you can adjust the picture position to the centre of the screen with the cursor keys With a DVI connector Note only a DVD player with DVI with digital sound can be connected to the HDMI connector 1 Connect the DVI to HDMI cable to one of the HDMI connectors of your TV 1 2 Connect the audio cable 2 to the DIGITAL AUDIO IN connector of the TV 3 Select the equipment you have connected in the Installation menu Select your connections p 30 and link it HDMI 1 or 2 4 Also select DIGITAL AUDIO IN in the same Connections menu Votis JC JC antennae Coomnoon A t a sonoran otr ion 46 Downloaded From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina 47 an Connect a DVD player a satellite receiver or HD receiver Tip if necessary you can adjust the picture position to the centre of the screen with the cursor keys With Component Video Connectors 1 Connect the three separate component video cables 1 to the YPbPr jacks on the DVD player and to the Y Pb and Pr jacks of EXT3 on the TV 2 Connect the audio cable 2 to the digital out of the equipment and to the DIGITAL AUDIO IN connector of the TV 3 Select the equipment you have connected in the Installation menu Select your connections p 30 Also select DIGITAL AUDIO IN in the same Connections menu and link it to EXT3
33. ct your TV settings By means of several split screens full screens you are prompted to select your preferred picture and sound PHILIPS Installation settings to finally arrive at a complete setting which satisfies you assistant Television 1 Press the green colour key on your remote control to enter the Settings assistant menu 2 Select your Location with the cursor up down Previous Next Skip Stop gt If you choose Shop it will skip the Settings assistant The TV parameters for Picture and Sound will then be set to predefined fixed settings PHILIPS Settings assistant Press the green colour key again to proceed gt If you choose Home it will display the Settings assistant 3 Use the cursor left right to each time select your preferred screen 4 Press the green colour key to each time confirm your selection and to jump to the following screen D e gt following items will be presented sequentially In the header it is mentioned how many screens have been completed and how many screens there are in total The Settings assistant will step sequentially through the following settings Picture and Sound 5 Press the green colour key again to store all the settings and to return to the TV installation menu Note when you skip or stop the Settings Assistant then the standard settings Philips selected for you will be chosen 6 Press the green colour key again to fi
34. d information about individual digital TV programmes According to the type of Electronic Programme Guide it also allows you to access the table of scheduled Digital TV programmes and easily select and tune to a desired programme See EPG Electronic Programme Guide p 34 Multimedia allows you to access the Multimedia browser application It lets you display your personal multimedia files Multimedia is only present when a USB device is connected See Multimedia browser p 35 2 Use the cursor up down to highlight and select a menu item 3 Use the cursor right to enter the highlighted menu item gt The right panel shows the content of the highlighted menu item 4 Use the cursor up down to select a menu item TV settings allows you to adjust your preferred picture TV menu TV settings and sound settings TV settings ettinas Features allows you to control the settings of special TV SERE features DI Tm Installation allows you to select your language preferences to search for and store your TV channels to set or adjust various special functions to select connected peripheral equipment to define one or more channel numbers as decoder channel numbers Info to reset your picture and sound settings to the factory standard settings to upgrade your TV software 12 Downloaded From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina 13 Ho
35. d the connector input available on your Home Cinema amplifier connect your receiver to the AUDIO OUT L and R connectors 3 or to EXT1 or 2 2 at the bottom or the rear of the TV 49 Downloaded From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina 50 e Use the Common Interface slot Warning switch off your TV before any module is inserted in the Common Interface slot Note this functionality is only available in certain countries To receive scrambled DTV signals you will need a CA Conditional Access module and a Smart card mJ provided by the service provider MN NE Sands J A CA module can enable additional services for example Pay TV Contact your Common Interface service provider to get more information about these modules Although CA module types may vary dependent the manufacturer each one of the CA modules common ivtenrace supports a certain kind of encryption system Your TV supports CA modules to work with the DVB T standard Note that a smart card may only be valid for a single broadcast channel CA modules and smart cards are neither supplied nor optional accessories from Philips The CA module is responsible for the messages and texts on screen In case of failure or strange behaviour you must call your Cl service broadcaster Insert a CA module Insert the specified Conditional Access module into the Common Interface slot as far as it wil
36. d From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina cb Adjust picture menu settings Continued summ Custom tint only when Tint is set to Custom TV settings Picture Fine tunes the white point WP and black level BL of the picture Custom tint 1 Picture Pixel Plus Select Custom tint and press the cursor right Use the cursor keys to select and adjust the settings of Dig Natural Motion R WP allows you to customise the colour tint by Dynamic contrast adjusting the red whitepoint of the picture G WP allows you to customise the colour tint by adjusting the green whitepoint of the picture B WP allows you to customise the colour tint by Info adjusting the blue whitepoint of the picture R BL allows you to customise the colour tint by adjusting the red blacklevel of the picture G BL allows you to customise the colour tint by adjusting the green blacklevel of the picture 3 Use the colour keys to reset to the predefined settings 4 Press the cursor left to return to the Picture menu Pixel Plus Pixel Plus is the most ideal setting as it fully processes the image to make every single pixel the best it can be improving contrast sharpness picture depth and colour reproduction and brilliance from every source including High Definition Select or Off to activate de activate Pixel Plus Digital Natural Motion Reduces the field and line flicker and reproduces smo
37. e and to deactivate again Language If the displayed characters on screen do not correspond with the characters used by the teletext broadcaster you can change the language group here o Select Gr or Gr Il with the OK key 39 Downloaded From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina Teletext Continued Digital text only for UK Some digital channels offer dedicated digital text services for instance BBCi 1 Press to switch Digital text on Note UK only digital text is displayed when programmes are carrying digital text or interactive services 2 To use the digital text follow the instructions on screen 3 Depending on the service you may be asked to use the cursor keys the OK key the coloured keys the teletext key and sometimes the digit keys 4 When you have finished watching teletext select a different channel with the P keys or follow the instructions on screen to return to picture 5 Press W MHEG CANCEL to cancel the digital text or interactive services U Text info Some digital channels also offer information on the programme being broadcast In that case a message may appear at the bottom of the screen for a few seconds Follow the instructions on screen and use the cursor keys to scroll through the next pages 909 OOOO 00 0000 Note digital text will not be available when Subtitles are set to On in the
38. e asked Downgrading to older software should only be done in case of real necessity 8 When the software upgrade was successful remove the USB portable memory and restart your TV with the power switch 1 at the side of the TV Your TV will start up with the new software Note Only use software upgrades that can be found on the www philips com support website 57 Downloaded From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina Annex 2 Philips TV Slideshow Format with background music Notes the latest version of this document can be found on the Philips support website www philips com support Use the type number of your TV to find this documentation and other related files Philips can t be held responsible for any problems that may occur as a result of the content in this document Errors reported to Philips will be adapted and published on the Philips support website as soon as possible Introduction This document explains how to make a Philips slideshow file with background audio Be aware that the content of this document is addressing technical or software skilled users To start the slideshow open the slideshow file in the Multimedia browser of your TV 1 Press the MENU BROWSE key on the remote control after having inserted a USB device and switched on the TV 2 Go to where you stored the slideshow file alb on your portable memory 3 Select the slideshow file and press the ok k
39. e list e Tune to a channel by pressing OK Use P for page up down All channels Use cursor up down to select and OK to confirm _ cy o e Favourites 1 1 Analogue channel 1 y Exit Leave edit Press the OK key to mark unmark 32 Downloaded From TV Manual com Manuals This allows you to select up to four favourite channels lists with your preferred TV channels and radio stations For example each member of your family can create his her own favourite list In addition to the favourite channel lists you may also select a list with only digital TV channels or a list with only the radio channels or a list with only the analogue channels Note when this key is pressed the first time after you have finished the installation it will bring up the full channel list In other situations it will bring up the last selected channel list To select a channel from the displayed favourite list 1 Press the FAV key or the OK key gt The last selected channel list appears 2 Use the cursor up down to select a channel 3 Press the OK key to display the selected channel To select another favourite channel list 1 Press the FAV key gt The last selected channel list appears 2 Press the red colour key to bring up the list of possible favourite channel lists Use the cursor up down to select a list Press the OK key Press the FAV key again to exit Un oed To create a favourit
40. e list or to modify the list 1 Press the FAV key gt The last selected channel list appears 2 Press the red colour key gt list with all possible favourite channel lists appears 3 Use the cursor up down to select a Favourites 1 to 4 channel list 4 Press the OK key 5 Press the green colour key to enter the Edit mode gt The selected Favourite list will bring up a full channel list 6 Use the cursor up down to select a channel 7 Press the OK key to check or uncheck the highlighted channel and to add it to or remove it from your selected favourite list 8a o Press the green colour key again to leave the Edit mode gt The modified favourite channel list appears o Press the FAV key again to exit gt With the P key you will be able to browse through the TV channels of the selected list 8b Press the red colour key to remove the channel list Note with the digit keys you can still select channels which are not marked as favourite 2584 3 en qxd 29 03 2007 10 48 Pagina d Create your favourite channels list Continued EN To select only TV or only radio channels on the All channels list When the All channels list is displayed or selected you may filter the list and select a list with only the TV channels or a list with only the radio channels 1 Press the FAV key gt last selected channel list appears Press the cursor left Select the All channels list and press the cursor ri
41. een as some recorders may be susceptible for signals from the display Keep a minimum distance of 0 5 m from the screen With a eurocable 1 Connect the aerial cables 1 and 2 as shown DN 2 Connect the eurocable 3 as shown 9 ON 3 Make your selection of the source to which the VCR has been connected in the Installation menu Select your connections p 30 With the aerial cable only 1 Connect the aerial cables 1 and 2 as shown 2 Tune in your recorder s testsignal and store the aur testsignal under programme number 0 Q J nJ U aan JE See Analogue manual installation p 27 of See also the handbook of your recorder 1 E c Connect a decoder and a VCR Connect a eurocable 4 to your decoder and to the special euroconnector of your recorder See also the handbook of your recorder Tip you can also connect your decoder directly to EXT1 or EXT2 with a eurocable 44 Downloaded From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina 45 an Connect two VCRs or VCR and DVD recorder EN Note you can not record signals from equipment connected to the YPbPr input With eurocables 1 Connect the aerial cables and 2 as shown 2 Connect your VCRs or DVD recorder to 1 and 2 with the eurocables and 5 3 Select the equipment you have connected in the Installation menu Select your connections p 30 and link it to EXT1 or 2 With aerial c
42. ey to start the slide show 4 To stop a slide show press the Bi key General Rules The slideshow will use plain ASCII XML syntax to allow the creation and editing of the slideshow files using simple tools All references to network content must be based on the global address of the content Content on a Portable Memory PM doesn t have a global address as a result content from a PM can never be referenced from a slideshow not stored on the PM itself To maintain portability a slideshow stored on a PM should ONLY reference content on the same PM Referencing global addresses can result in inconsistencies if the PM is used on a non networked CE device The latter is however not forbidden it is only a recommendation It is preferable that URL s referencing PM content are based on a relative path starting from the directory where the slideshow is stored This path includes the device or drive name of the PM An absolute path to content will also be supported relative path picturesWest1 jpg tamper jpg new bird jpg absolute path USB1 pictures1 foo_bar jpg C f1 jpg organization jpg General Format The format and syntax below will be used to create the slideshow file simple ascii text with the extension alb ALB Examples slshow1 alb summer holiday 2004 ALB test alb The following syntax should be used to create the text file xml version 1 0 encoding ISO 885h9 1 lt philips slidesh
43. firming that your PIN code has been created or changed This allows you to set or change the personal 4 digit access code that is used in the different lock functions of the TV On timer Common interface Demo Info On timer From standby this automatically switches the TV to the specified channel number at a specified time Select On timer Press the cursor right to enter the On timer menu Select Timer and press the cursor right Select On Select Channel and then the TV channel you want your TV to switch to on a selected time and day Select Day and then a day of the week or select Daily Select Time and enter the time with the digit keys or with the cursor up down 8 Press the OK key to activate 9 Press the cursor left to return to the Features menu or press the MENU BROWSE key to switch off the menu pn oU acm AE Note From now on every week your TV will automatically switch to the selected channel on the selected day at the selected time until the On timer function is switched off again 22 Downloaded From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina 2c Adjust feature menu settings Continued EN Common interface TV menu Features Note this functionality is only available in certain Features Pam countries Childlock Set Change code This allows you to access common interface applications ORE defined by the service prov
44. g content 37 Downloaded From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina Note Teletext is not available via equipment connected to the HDMI connector Most TV channels broadcast information via teletext This TV has a 1200 pages memory that will store most broadcasted pages and subpages to reduce waiting time After each programme change the memory is refreshed o Press to switch the teletext on The main index page appears on the screen Select a Teletext page o Enter the desired page number with the digit keys or with the P key Select the options at the bottom of the screen with the colour keys amp Previous selected teletext page Press the key 0000 Select T O P teletext broadcasts o Press i9 gt A T O P overview of the teletext subjects available is displayed Select with the cursor up down left right the desired subject and press the OK key 00 000 Note not all TV channels broadcast T O P teletext Select subpages When a selected teletext page consists of different subpages a list of available subpages appears on the screen Press the cursor left or right to select the next or previous subpage Picture Teletext 1 Press the amp key 2 Press the key to show Teletext on the right of the screen 3 Press the key to return to a full teletext picture 4 Press the amp key to return t
45. ght Press the red colour key to filter Select your desired channels list Press the FAV key again to exit gt With the P key you will be able to browse through the TV channels of the filtered list ON o Note the filtering will not be remembered after the TV is switched off or set to standby EPG Electronic Programme Guide only with Digital TV channels The Electronic Programme Guide shows you detailed information about the current programme and also about the next programme only for TV programmes that provide EPG information Note these instructions may differ according to the type of Electronic Programme Guide 1 Press the T key gt EPG screen appears Dependent on conditions it may take some time to acquire EPG data gt The EPG screen updates automatically if the EPG data is acquired successfully If not the EPG screen remains blank gt Information about the selected programme appears Use the coloured keys to activate the available EPG features displayed at the bottom of the screen 2 To quit the Electronic Programme Guide press the T key again When the type of Electronic Programme Guide available displays a list of TV programmes for UK only 1 Use the cursor up down to select a desired TV programme gt Information about the selected programme appears Tips press the blue colour key on the remote control to view more information not currently displ
46. he screen electronic apparatus in general have the ability to emit and receive electromagnetic signals Do not touch push or rub or strike the screen with One of Philips leading Business Principles is to take anything hard as this may scratch mar or damage the all necessary health and safety measures for our screen permanently products to comply with all applicable legal And please do not rub with dust clothes with requirements and to stay well within the EMF chemical treatment standards applicable at the time of producing the Do not touch the surface with bare hands or greasy products cloth some cosmetics are detrimental to the screen Philips is committed to develop produce and market Unplug the TV before cleaning the screen products that cause no adverse health effects When the surface becomes dusty please wipe gently Philips confirms that if its products are handled with absorbent cotton or other soft materials like properly for their intended use they are safe to use chamois soaks Do not use acetone toluene and according to scientific evidence available today alcohol because they cause chemical damage Do not Philips plays an active role in the development of use liquid cleaners or aerosol cleaners Wipe off saliva international EMF and safety standards enabling or water drops as soon as possible Their long time Philips to anticipate further developments in contact with the screen causes deformations and standardisatio
47. he settings of the TV there are 3 ways of doing it See next pages Info 13 Downloaded From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina 14 Use of the TV menu settings continued TV menu TV settings A Change settings in an easy to use manner with the Settings assistant Reset to standard Each time you ve made a selection press the green key to Picture confirm your selection Sound 1 Select Settings assistant and press the cursor right gt By means of several split screens full screens you are prompted to select your preferred picture and sound settings to finally arrive at a complete setting which satisfies you See First time installation Step 3 Settings assistant select your TV settings 11 2 Press the green colour key to return to the TV menu again Info B Use of the Standard settings if present This allows you to reset your settings for viewing and TV menu listening to predefined factory settings TV settings Reset to standard Current 1 Select Reset to standard and press the cursor right Reset to standard MOCT gt A menu appears which allows you to select one of the standard settings for viewing and listening Visie gt Current shows your current settings for viewing and Subtle listening gt Ifyou select Vivid it allows you to set your picture and sound settings to rich values making use of the TV capabilities to its full e
48. ider of the Common Interface module Commoniinterace The Common Interface CI module can contain one or Dano more applications which are used to communicate with the Info CI service provider and provide some additional facilities to the user Note this menu item and the common interface applications are only displayed when an authenticated Common Interface card is present and some Common Interface card user interface sessions are listed The CI service provider is responsible for the messages and texts on screen In case of failure or strange behaviour you must call your Cl service provider See Use the Common Interface slot p 50 Demo TV menu This allows you to get an idea of the features that are part Features Demo of the television Pixel Plus Settings assistant Select Demo Press the cursor right Select a desired demo Press the OK key to start the demo The selected demo is played once Press the red colour key to stop the demo and to return to the demo menu Press the red colour key to exit the demo menu Active control wv o Info 23 Downloaded From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina How to search for and store TV channels Tip you will need this chapter only if you want to change the installation settings view TV menu Installation guag Installation
49. in case several languages are broadcasted Hearing impaired This allows you to select the hearing impaired audio or subtitle language When set to On the Hearing impaired version of your preferred audio or subtitle language will if available be reproduced When set to Off the normal audio and subtitle language behaviour will be applicable 2584 3 en qxd 29 03 2007 10 48 Pagina eh How to search for and store TV channels Continued TV menu Installation Select your country This allows you to select the country where you are now es located Installation Connections Notes Decoder if you select a wrong country the channel numbering will not Factory settings be according to the standard for your country gt incase the country selected is not DVB T supported by your TY digital related menu items will not be accessible Info Select the time zone only with digital TV broadcasting Only applicable for certain countries and dependent on the selected country This allows you to select your local time zone so that the clock display shows the correct time Store TV and radio channels After language and country are set correctly you can now search for and store the TV channels o Select Channels in the TY Installation menu TV menu Installation Channels Automatic installation Installation update The TV will scan the entire frequency spectrum b
50. ins supply voltage corresponds to the voltage printed on the sticker at the rear of the TV Remote control Insert the 2 batteries supplied Type R6 1 5V Be sure the and ends of the batteries line up correctly inside of case is marked For most keys pressing a key once will activate the function Pressing a second time will de activate it Downloaded From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina 5 Use of the remote control RC4350 1 Standby Press to switch the TV from or to standby mode When switched to standby a red indicator on the TV lights up Attention the TV is never powered off completely unless it is physically unplugged DVD STB TV VCR AUX DVD STB TV VCR AUX Press the SELECT key repeatedly to select one of the system modes in which the remote control can be used If no action is being undertaken within 60 seconds the remote control returns to TV mode After an action in the selected system mode the remote control will remain in this mode for 60 seconds and will then return to TV mode On screen information Press to display when available information about the selected TV channel and programme CB Dual screen Press the GB key to show teletext on the right of the screen 2 8 S DEMO Press to switch the Demo menu on or off Colour keys When functions are attached to the colour keys the colour keys are shown on screen To select a page i
51. l go It may take a few minutes before the CA module is activated and service information is downloaded Warning when you connect the CA module incorrectly it may damage the card and the TV After inserting a card leave it in the slot permanently Do not remove it from the slot unless asked to do so For example your card has to be in the slot when your CI service broadcaster wants to download new information to the smart card Once the CA module is removed your TV will no longer decrypt scrambled digital DVB T channels To access common interface applications see TV menu Adjust feature menu settings Common Interface p 23 50 Downloaded From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina Select connected equipment EN Before operating your connected equipment you have to make a selection in the Installation Select your connections menu p 30 Press the MENU BROWSE key Select TV menu and press the cursor right Select Installation Press the cursor right Select Connections Press the cursor right Select the input to which the peripheral equipment is connected Press the cursor right again to enter the list of types of peripherals connected to the selected input 9 Select the peripheral equipment with the cursor up down Cg UT A pU bo Record with your recorder Note to record digital programmes to an analogue recorder the TV needs to be switched on and
52. lay even if temporarily switched to browser screens The audio will be stopped when another song starts playing or when the end has been reached more technical remarks can be found in Annex 3 Philips TV Digital camera and USB issues p 60 Following icons may appear folder E self made playlist album 2584 3 en qxd 29 03 2007 10 48 Pagina 2 Multimedia Browser Continued EN Function keys at the bottom of the screen Details to display a description of the selected file or directory Transitions to select if you like to apply a transition during a slide show Slide time to select the duration a picture will be displayed in a slide show Rotate to rotate a picture Repeat one all to repeat the playback of a music file Shuffle to shuffle music collections in a random way Zoom to select one of the zoom magnifications x1 x2 x4 with the cursor up down Additionally you can shift the selected zoom window over the screen with the cursor keys Full small screen to toggle between a full or a small screen Note to rotate a picture or to select one of the zoom magnifications first stop the slide show with the OK key or the blue colour key O00 Multimedia function keys on the remote control 44 to fast rewind displaying content to stop playing content P to play a single file start a slide show playback of a folder or other collection to pause playing content PP to fast forward displayin
53. llows you to adjust the size of the picture dependant on the broadcasted format and your preferred setting How to navigate through the TV settings menu see p 13 Use of the TV menu settings Tip this function is also accessible via the OPTION key on the remote control see p 7 Choose among the following picture formats Auto format Super zoom 4 3 Movie Expand 14 9 Movie Expand 16 9 or Q Q Q Auto format makes the picture fill the screen as much as possible V AIO O In case of subtitles in the bottom black bar Auto format C makes the subtitles visible la cx O In case of a broadcaster logo in the corner of the top black bar the logo disappears from the screen Super zoom removes the black bars on the sides of 4 3 programmes with minimal distortion When in Movie Expand 14 9 Movie Expand 16 9 or Super zoom screen format you can make subtitles visible with the cursor up down Note with HD sources not all picture formats will be available 17 Downloaded From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina ab EN Adjust sound menu settings The sound menu contains the settings that affect the quality of TV menu 2 the sound TV settings Sound Equalizer 1 Press the MENU BROWSE key on the remote control Volume gt main menu appears 2 Select TV menu and press the cursor right audio lan gt The TV Menu is moved to the left Dual I II 3 Select
54. n Teletext mode OPTION To open and close the Quick access menu which contains a few frequently used options like Picture format When in teletext press repeatedly to enlarge the teletext page display See Teletext p 39 2000 E E QA To open and close the Electronic Programme Guide See EPG Electronic Programme Guide p 33 Cursor keys Press the cursor keys up down left right to navigate through the menus OK To activate a setting To display the channel list Starts playing content in the Multimedia Browser application BROWSE MENU To open and close the main menu See How to navigate through the menus p 12 Downloaded From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina 6 Use of the remote control RC4350 Continued E Teletext On Off Press to switch teletext on See Teletext p 38 40 Only for UK Digital text Interactive television Attention not all channels transmit interactive television applications at all times 1 Volume Press or to adjust the volume Mute key interrupt the sound or restore it P Channel selection to browse through the TV channels and sources stored and marked in the Favourite channels lists to select a page in Teletext mode to quickly browse through the lists in the menus to switch the TV on from standby mode 0 9 Digit keys To select a TV channel between 0 and 999 AV Select your peripheral
55. n for early integration in its products colour fading 3 z Pixel characteristics Stationary images on the TV screen Your TV display is made with high precision A characteristic of LCD and Plasma Panels is that technology with a high number of colour pixels displaying the same image for a long time can cause a Although it has effective pixels of 99 999 or more permanent after image to remain on the screen black dots or bright points of light red green or Normal use of the TV should involve the showing of blue may appear constantly on the screen This is a pictures that contain constantly moving and changing structural property of the display within common images that fill the screen industry standards and is not a malfunction Examples of stationary images this is not an all inclusive list you may encounter others in your viewing TV and DVD menus listings of DVD disk content Black bars when black bars appear at the left and right side of the screen it is recommended to change to a picture format so that the picture fills the entire screen Downloaded From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina 3 Getting started EN Before you start Warning do not insert the mains cord into the mains at the bottom of the TV and in a wall socket or hang the TV on the wall before all connections are made Before you switch on your TV connect all your peripheral equipment See To make
56. nd the TV No sound o Verify if the volume isn t at minimum o Verify if the sound hasn t been muted with the 1K key Verify the connections between the optional equipment and the TV Sound and picture it occurs occasionally perhaps there is something wrong with the broadcasted interruptions using programme HDMI to HDMI o f it occurs persistently see the manual of your connected equipment to verify the connection necessary adjustments Alternatively connect an extra audio cable either an analogue or a digital audio cable from your connected peripheral to your TV Verify whether you selected the connected equipment in the Installation menu Select your connections and also select the respective audio input in the same Connections menu Note An analogue audio cable must be linked to HDMI 2 Limit the HDMI cable length to max 5 m o Verify if the connected equipment is properly selected in the Installation menu Connections according to the connection you have made HDMI 1 or 2 No sound when o Verify whether you properly connected the audio cable to the DIGITAL AUDIO using DVI to HDMI IN connector of the TV connection o Verify whether you selected the connected equipment in the Installation menu Select your connections and if you linked it to HDMI 1 or 2 according to where you made the connection Also verify if you selected digital audio in in the same Connections menu No digital channels Contact
57. nish the First time installation procedure and to display the first stored TV channel Note any time you can change or reset your settings or adjust individual settings for Picture and Sound in the TV settings menu See p 13 Use of the TV menu settings To control the settings of special TV functions features and accessory equipment see p 20 Adjust feature menu settings 11 Downloaded From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina 12 How to navigate through the menus Introduction A lot of guiding instructions help texts and messages will be displayed on your TV when you use the menus or when you try to execute an action Read the help texts which are being displayed on the specific item highlighted The colour keys at the bottom of the screen refer to the different actions which may be executed Press the corresponding colour key on the remote control to perform the required or desired action Note digital related menu items will only be accessible in case of digital TV broadcasting 1 Press the MENU BROWSE key on the remote control gt main menu appears on the screen TV menu allows you to access the TV menu See below Channel list allows you to access the TV channel list and to create up to four favourite lists with your preferred TV channels and digital radio stations See Create your favourite channel list p 32 Programme guide allows you to access detaile
58. o a full screen picture 38 Downloaded From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina 2d Teletext Continued EN Hypertext With hypertext you can quickly jump to a pagenumber or search for a specific word shown on the current teletext page 1 Press the OK key to highlight the first word or a number on the page 2 Use the cursor up down left right to select any other word or number you want to search for 3 Press the OK key to confirm The search starts gt A message appears at the bottom of the screen to indicate the searching or that the word or page is not found 4 Use the cursor up until the top of the page to exit hypertext Enlarge a Teletext page o Press the OPTION key on the remote control repeatedly to display the upper teletext part the lower teletext part and then to return to the normal teletext page size Teletext menu The Teletext menu offers various functions to control teletext Menu Reveal Off 1 Switch teletext on and press the MENU BROWSE key to activate the menu Iges Off 2 Press the cursor up down to select the menu items w Press the OK key to activate ga 4 Press the MENU BROWSE key to leave the teletext menu Reveal Reveals conceals hidden information on a page such as solutions to riddles and puzzles Cycle subpages if subpages are available Makes the subpages cycle automatically o Press the OK key to activat
59. ocedure it is advised to Caia i check what your current TV software is Select Software upgrade in the Installation menu Press the cursor right The Software upgrade menu moves to the left panel 3 Select Current software info to observe the version and the description of the current software Announcement Software upgrade Preparing a USB portable memory for software upgrade Info What do you need A personal computer with web browsing capability An archive utility that supports the ZIP format e g WinZip for Windows A preferably empty USB portable memory Note Only FAT DOS formatted portable memory is supported New software can be downloaded from the www philips com support website Insert a USB portable memory device into a PC linked to the internet Go to www philips com support Choose your country or area language Enter your model number In the Search results click on the model number Under Product support click on Software and drivers Click on the Firmware Upgrade zip file Click on the Download arrow in the upper left corner of your screen Save the latest software upgrade file to your computer 10 Double click on the zip file and copy the file autorun upg to the root directory on the USB portable memory ON g th 99 HS Note Only use software upgrades that can be found on the www philips com support website 55 Downloaded From TV Manual com Manuals
60. oth movement especially in movies Select Off Minimum or Maximum in order to really see the difference in picture quality Dynamic contrast Automatically makes the contrast in the darker and the brighter picture areas more noticeable as the image on the screen changes Normally select Medium It may be preferred to select Minimum Maximum or Off DNR DNR automatically filters out and reduces the image noise This improves picture quality when receiving weak signals Select Off Minimum Medium or Maximum according to the image noise in the picture 16 Downloaded From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina ue Adjust picture menu settings Continued TV menu MPEG artefact reduction TV settings Picture MPEG artefact reduction On smoothens the transitions on digital content o Select On or Off Colour enhancement Automatically controls green enhancement and blue Active control stretch It makes the colours more vivid Light sensor o Select Off Minimum Medium or Maximum Picture format Active control Info The TV continuously measures and corrects all incoming signals in order to provide the best picture possible o Select On or Off to activate de activate Active control Light sensor Light sensor On automatically adjusts the picture settings for best viewing dependent on the lighting conditions in the room o Select On or Off Picture format This a
61. ow version 1 0 gt lt title gt Title of the slideshow lt title gt lt audio gt audio_url lt audio gt lt slide duration gt 30 lt slide duration gt lt slides gt lt slide gt slide_1_url lt slide gt slide slide 2 url slide slide slide 3 url slide lt slide gt slide 4 url lt slide gt slide slide 5 url lt slide gt slide slide 6 url slide slide slide N 1 url slide slide slide url slide slides 58 philips slideshow Downloaded From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina Annex 2 Continued EN Supported XML tags The following table gives a description of the XML syntax Tag Name Use Description philips slideshow mandatory Philips slideshow signature including the version title optional The title of the playlist audio optional The audio URL following this tag will define the music playing in the background during the slideshow A single song or playlist m3u amp pls are the only valid audio references Other reference will not result in any audio playback If a single song is referenced the song will be repeated forever a playlist is referenced the playlist will be played in sequence with a repeat at the end of the playlist slide duration optional The default display time in 0 1 second of a slide The TV application isn t obliged to support this tag The TV application can force the use of one or m
62. ple information on the programme input signal quality of connected peripheral equipment the screen format and sound mode selected audio language subtitle language ratings remaining time of the sleeptimer setting Display a Programme title This allows you to display the programme title according to the transmitted information gt When selected Yes after the selection of a TV programme or after you press the key on the remote control a programme title will be displayed if transmitted 29 Downloaded From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina c EN Select your connections This allows you to select the peripheral equipment you have connected to the audio and video connectors TV menu Installation Connections EXT 1 Select Connections EXT2 2 Press the cursor right EXT3 3 Select the input to which the peripheral equipment is HDMI 1 connected Connections gba gt When you select EXT1 EXT2 EXT3 HDMI 1 HDMI 2 Side or DIGITAL AUDIO IN a list appears 50077 KU which allows you to identify which type of peripheral DIGITAL AUDIO IN equipment is attached to this input 4 Press the cursor right again to enter the list of types of peripherals connected to the selected input Select the peripheral equipment with the cursor up down Info 5 Digital Audio In If a peripheral equipment has a digital audio output you can connect this with a single cable
63. r Subtitles NN See Use of the TV menu settings Adjust sound menu Picture format settings p 18 Clock o Select to activate deactivate the clock display on the screen Downloaded From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina 8 Keys at the right side of the TV In case your remote is lost or broken apart from channel selection and volume adjustment you can still change some of the basic settings with the keys at the side of your TV o Press the power switch 1 to switch the TV on or off The MENU key can be used to summon the TV menu EE 0 without the remote control o Use the VOLUME and keys and the PROGRAM CHANNEL and keys to select menu noms Introduction Digital TV Besides traditional analogue broadcasts you can also receive digital broadcasts via a roof or loft mounted digital antenna in countries where those signals are available and which are supported by this TV Verify if the country you are now located and you have selected during the installations see further supports digital video broadcasting via antenna See www philips com support for the list of supported countries or consult your local dealer or see the sticker at the back of your TV Note for digital TV channels via a cable connection you will need an extra set top box decoder for digital TV channel via satellite a satellite tuner and dish mounted outdoors are required
64. r music play or in poor quality o Verify if the source complies with a supported code No stable or not synchronised VGA picture o Verify if you have selected the correct VGA mode in your PC See Connect a PC p 53 o Verify the connections between the TV and the PC No solution found for your picture or sound problem o Switch off your TV off and then on again once Never attempt to repair a defective TV yourself Verify with your dealer or call a TV technician Red blinking led Unplug the mains cord for 10 seconds and insert it in again Black bars with HD channels Select another picture format No EPG data The Electronic Programme Guide function and background programme available information are only made available by TV channels that provide EPG information and in countries which support EPG See www philips com support 54 Downloaded From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina Annex 1 Philips TV software upgrade with portable memory EN Introduction Philips continuously tries to improve its products and it wants you to profit of that even after your purchase Therefore it allows you to upgrade your TV software using a USB memory device not supplied You can execute the software upgrade procedure yourself TV menu Verifying the version of the TV software Installation Software upgrade Before starting the software upgrade pr
65. reception of the channel found 8 Select Store current channel if you want to store the fine tuned frequency under the current channel number Press the cursor right and confirm with the OK key Select Store as new channel if you want to store the fine tuned frequency under a new channel number Press the cursor right and confirm with the OK key 9 Use the rearrange menu to rename or reshuffle the channels See next page Note when on a frequency where a DVB signal is broadcasted the tuner will try to decode an analogue TV channel and hence will not show video 27 Downloaded From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina 28 Rearrange the channel number list TV menu This allows you to rename to reshuffle and to uninstall or Installation reinstall the stored channels o Press the corresponding colour keys and follow the on Autom installation screen instructions Installation update ENEMIES Reshuffle Analogue manual This allows you to change the order of the stored TV Preferences MONIO channels 1 Select the channel you want to change place 2 Press the yellow colour key to move up a single position in the list 3 Press the blue colour key to move down a single position in the list 4 Repeat to reshuffle other TV channels Info TV menu Installation Channels Rearrange Rename This allows you to change the name stored
66. roduct information Your TV consumes energy in standby mode Energy consumption contributes to air and water pollution Very low standby power consumption Specifications see the product leaflet on www philips com support If you need further assistance please call the customer support service in your country The corresponding telephone numbers and addresses are given in the supplied Worldwide guarantee booklet Belgi Belgique 070 222 303 0 17 min Danmark 3525 8760 Local Deutschland 0180 5 356 767 0 12 min France 08 9165 0005 023 min EAAAX 0 0800 3122 1280 Awpedav Espa a 902 888 784 0 15 min Downloaded From TV Manual com Manuals Ireland 01 601 1777 Local Italia 199 404041 0 25 Luxembourg 40 6661 5644 Local Nederland 0900 8407 0 20 min Norge 2270 8111 Local sterreich 0820 901114 0 20 min Portugal 2 1359 1442 Local Schweiz Suisse Svizzera 0844 800 544 Local Svenska 08 5792 9100 Local Suomi 09 2311 3415 Local United Kingdom 0906 1010016 0 15 min 63
67. rol returns to TV mode After an action in the selected system mode the remote control will remain in this mode for 60 seconds and will then return to TV mode or press the SELECT key to return to TV mode immediately 52 Downloaded From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina d Troubleshooting EN Symptom Possible cause Remedy No picture Verify if the supplied cables are connected properly The aerial cable to the TV the other aerial to your recorder the power cables Verify if you selected the correct source o Verify if the child lock has been switched off Poor picture o Verify in the Manual installation menu if you have selected the correct TV system o Verify if your TV or house aerial isn t located too close to loudspeakers non earthed audio equipment or neon lights etc Mountains or high buildings can cause double pictures or ghost images Sometimes you can improve the picture quality by changing the direction of the aerial s the picture or teletext unrecognisable or do you experience bad teletext reception Verify if you have entered the correct frequency or fine tune the frequency for that specific channel or adjust the antenna direction if the problem isn t solved by finetuning See Installation Analogue manual installation p 27 Poor colour o Select Factory settings in the Installation menu o Verify the connections between the optional equipment a
68. s See Installation menu Select your connections p 30 Previous channel Press to alternate between the currently viewed and the previously viewed TV channel O44 B gt gt See Audio and Video equipment keys p 52 See Multimedia browser functional keys p 37 MHEG CANCEL Only for UK Digital text Interactive services Press this key to cancel those special services and the function bar at the bottom of the screen FAV To display the channels list You can create up to four favourite lists Downloaded From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina 7 e Use of the OPTION key EN The OPTION key allows you to display the Quick access menu which will give you direct access to some features and menu options 1 Press the OPTION key gt Quick access menu appears 2 Press the cursor up down to select a menu item 3 Press the OK key to jump to the selected menu item in the TV menu Except for the Clock option 4 Use the cursor keys to make a selection 5 Press the OPTION key to exit Note digital related menu items will only be accessible in case of digital TV broadcasting Digital audio language See Adjust sound menu settings p 18 Digital subtitle language See Adjust feature menu settings p 20 Subtitles See Adjust feature menu settings p 20 Picture format iick access See Use of the TV menu settings Adjust picture menu settings p 17 Equalize
69. s you to mark unmark up to 50 preferred EPG channels Note after the installation of your channels by default 40 channels with available EPG data will automatically be marked as preferred EPG channel Programme Guide What s on 12 00 South today Acquire EPG data allows you to update the information 13 30 Working lunch for the preferred programme guide channels Follow the lt lt lt 7 instructions on screen 12 30 Brainteaser 12 00 This is BBC THREE Note Acquisition of EPG data is done automatically while watching TV 6 To quit the Electronic Programme Guide press the key again Info Tips the EPG screen will not include TV channels which are not in the Preferred channel list or which are uninstalled See Rearrange menu new added channels via reinstallation or installation will have to be marked in the preferred EPG channel list before you can see EPG data 34 Downloaded From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina Multimedia Browser EN The Multimedia browser lets you display pictures or play audio files stored on a USB device The Multimedia browser application is invoked from the main menu Following file formats can be reproduced for pictures JPEG for audio MP3 MP3 Pro LPCM Only FAT DOS formatted memory devices are supported Philips can not be held responsible if your USB device is not supported To view content from a USB
70. switch the TV 9 teletest teletext teletext 2 5 time zone selection T O P teletext troubleshooting tv menu settings uninstall usb connector a usb ie 1 video equipment keys 52 6 18 VOR 44 2584 3 en qxd 29 03 2007 10 48 Pagina 2d Disposal of batteries Recycling The batteries supplied do not contain the heavy metals mercury and cadmium Please check on how to dispose of exhausted batteries according to local regulations 85 The packaging of this product is intended to be recycled Apply to the local authorities for correct disposal Disposal of your old product Your product is designed and manufactured with highly quality material and components which can be recycled and reused When this crossed out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002 96 EC Please inform yourself about the local separate collection system for electrical and electronic products Please act according to your local rules and do not dispose of your old products with your normal household waste The correct disposal of your old product will help prevent potential negative consequences for the environment and human health P
71. the green colour key on your remote control when Television is highlighted 2 Select the country where you are now located Notes if you select a wrong country the channel numbering will not be according to the standard for your country in case the country selected is not DVB T supported by Menu language your TV digital related menu items will not be accessible Please select your English Espafiol language P 3 Press the green colour key on your remote control to start the Automatic channel installation gt available digital TV and radio channels and analogue TV channels are searched for and stored automatically using cursor up and aava This will take a few minutes When the search is down complete the menu will indicate the number of digital and analogue channels found Notes reception of digital terrestrial TV channels is applicable PHILIPS Installation dependent on the country selected if you choose to install the channels at a later time select the Automatic installation in the TV menu Installation Channels to scan available channels Television 4 Press the red colour key again when the search is Previous Next Skip Stop leted completed PHILIPS Television Downloaded From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina He First time installation Continued EN Step 3 Settings assistant sele
72. to the TVs DIGITAL AUDIO IN connector In the Connections menu assign the DIGITAL AUDIO IN to the corresponding external input to which your peripheral equipment is connected In addition to accepting audio input via DIGITAL AUDIO IN the TV can output encoded Dolby Digital audio via the DIGITAL AUDIO OUT connector to an external amplifier or receiver If your amplifier or receiver has a matching connector for DIGITAL AUDIO IN you can connect it with a single cable to the TV s DIGITAL AUDIO OUT See To make video and audio connections Connect a Home Cinema amplifier p 49 Select Decoder channel number TV menu This allows you to define one or more channel numbers as decoder channel numbers when a decoder or a descrambler is connected to EXT1 or EXT2 Installation Decoder Channel Status 1 Select the channel number under which you have stored the programme that comes from your decoder or descrambler 2 Select Status 3 Select the input used to connect your decoder None EXT1 or EXT2 o Select None if you do not want the selected channel number being activated as a decoder channel number Info 30 Downloaded From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina c Reset the Factory settings EN TV menu This allows you to reset most of the predefined factory states Installation Factory settings 1 Select and press the cursor right 2 Press the OK
73. u can adjust the picture position to the centre of the screen with the cursor keys Due to legal requirements it is possible that with certain copy protected PCM audio qualities from a peripheral equipment connected to the HDMI input the Digital audio output signal is muted Proper working is only guaranteed with HDMI compliant consumer products Limit the cable length to maximum 5 m n case no signal is detected from your HDMI equipment switch off the HDMI equipment and then on again 61 Downloaded From TV Manual com Manuals active control s analogue manual installation n antenna netur audio receiver audio equipment keys auto automatic installation avl audio volume leveller 19 balance sssssesesese batteries brightness 42 camcorder 42 care of the screen 2 change code 22 channel list 12 32 child lock Colo essct a colour enhancement 17 colour keys eene 5 common interface slot 23 50 comp video connectors 47 49 41 contrast 15 country selection 45 Cursor Keys cernerent 5 custom tint 16
74. ultiple predefined display times slides mandatory Identifies the slides to show slide optional Identifies the URL of the individual slide 59 Downloaded From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina eG Annex 3 Philips TV Digital camera and USB issues Notes the latest version of this document can be found on the Philips support website www philips com support the software of your TV is upgradeable If you have problems first check if you have the latest software installed on your TV The latest software together with instructions can be found on the Philips support website Use the type number of your TV to find this documentation and other related files Philips can t be held responsible neither for any errors in the content of this document nor for any problems as a result of the content in this document Errors reported to Philips will be adapted and published on the Philips support website as soon as possible Digital Camera Issues If a USB connection between your digital camera and the TV isn t working you can try the solutions below to resolve your problem Make sure your digital camera is switched on and verify if the configuration of your digital camera is correct see the manual of your digital camera for more information Some digital cameras allow you to switch off the USB interface Make sure that the USB interface is switched on before connecting to the
75. video and audio connections p 41 Overview of the rear connector panel There is a wide range of audio and video equipment that can be connected to your TV See To make audio and video connections p 41 um common INTERFACE 1 JA nomi z JU antennan era unio J L L A AUDIOOUT A a v Ano EXT1 can handle CVBS RGB and Audio L R EXT2 can handle CVBS S VIDEO RGB Audio L R EXT3 can handle YPbPr RGB H V and Audio L R HDMI 1 and 2 Supported video formats 480i 480p 576i 576p 720p 10801 Warning disconnect all power sources before making any connections Tip it is preferable to connect peripherals with RGB output to EXT1 or EXT2 as RGB provides a better picture quality Downloaded From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina 4 an Getting started Continued Overview of the side connector panel To connect a camera camcorder or game see To make video and audio connections p 42 To connect a headphone see To make video and audio connections p 42 To connect a USB device see Multimedia browser p 35 Connect the antenna Insert the aerial plug firmly into the aerial socket M at the bottom of the TV Tip for best quality use the suppressor cable supplied Connect the mains Insert the mains cord supplied into the mains at the bottom of the TV and in the wall socket Warning verify that the ma
76. w to navigate through the menus continued EN TN TV settings 5 Press the cursor right to enter the highlighted menu item TV settings ettings a gt content of the right panel is moved to the left panel Reset to standard and the right panel now shows the content of the newly pem highlighted item in the left panel Note in some cases it is important that the picture can be watched while you adjust the settings This means that when the highlight is on the right side panel the other menu items hide away When the cursor left is pressed the hidden menu items reappear and the highlight moves to the left panel Info 6 Press the MENU BROWSE key to exit the main menu Use of the TV menu settings The TV menu allows you to access and change settings and preferences in case you want to change the First time installation settings and or you want to control the settings of special TV functions features and peripheral equipment Adjust viewing and listening settings TV menu TV settings 1 Press the MENU BROWSE key on the remote control TV settings EOE gt main menu appears on the screen Reset to standard 2 Select TV menu and press the cursor right Picture gt TV menu is displayed Sound 3 Select TV settings and press the cursor right gt The TV settings menu is moved to the left 4 Press the MENU BROWSE key to exit the menu To make it easier to change t
77. with the OK key Tip this function is also accessible via the OPTION key on the remote control 20 Downloaded From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina 21 Adjust feature menu settings Continued EN Sleeptimer TV menu Features This sets a time period after which the TV automatically ES _ switches to standby Features 1 Select Sleeptimer all Childlock 2 Press the cursor right Set Change code 3 Select a value with the cursor up down gt The list will have values from 0 to 180 minutes When 0 is selected the sleeptimer is switched off Common interface Demo Note you can always switch off your TV earlier or select another time set Info Childlock With a 4 digit code you are able to lock TV channels and external sources to prevent children from watching certain programmes Select Childlock Press the cursor right to enter the Childlock menu Enter your 4 digit code pr Note you have to re enter your code each time you enter the Childlock menu 4 Select one of the menu items of the Childlock menu and press the cursor right Lock to lock all channels and externals Custom lock to lock a certain programme or to lock all the channels from a certain time o Select Lock after to lock all programmes from a certain time onwards Press the cursor right twice Select On to set the lock o Press the cursor left
78. xtend gt If you select Natural it allows you to set your picture Info and sound settings to the recommended standard values In most cases this will give the best balanced viewing experience gt If you select Subtle it allows you to set your picture and sound settings to the purest representation of the original source content 2 Press the green colour key to store the selected setting Note storing a standard setting will overwrite your current settings for viewing and listening TV menu TV settings C Individual settings for picture and sound SAU Select Picture or Sound and press the cursor right Reset to standard gt A menu appears which allows you to fine tune the Picture picture and sound settings Sound gt adjust the Picture settings see Adjust picture menu settings p 15 To adjust the Sound settings see Adjust sound menu settings p 18 Note read the help texts which are being displayed on the specific item highlighted Info 14 Downloaded From TV Manual com Manuals 2584 3 en qxd 29 03 2007 10 48 Pagina Adjust picture menu settings EN The picture menu contains the settings that affect the quality of the picture TV menu TV settings Settings assistant Reset to standard 1 Press the MENU BROWSE key on the remote control gt main menu appears 2 Select TV menu and press the cursor right gt TV menu is

Philips 42PF7621D User manual

Contents

Download Pdf Manuals

Related Search

Related Contents