ELAR Quad Panel User Manual 1.0
Contents
1. Pin 3 Pin 2 Ground Pin 1 Starting DMX 001 Weights and measures Dimensions 19 69 L x 4 69 W x 19 69 H 500mm L x 119mm W x 500 L mm Weight net 42 Ibs 19 05 kgs Fixture IP Rating IP65 Maximum Ambient 45 113 F Temp Please Note Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice 43 ELAR QUAD PANEL User Manual 1 0 www elationlighting com 16 OPTIONAL ACCESSORIES ORDER CODE ITEM DESCRIPTION ELARQUAD GFH Gel Frame for ELAR QUAD Series 44 ELAR QUAD PANEL User Manual 1 0 Elation Professional USA 6122 S Eastern Ave Los Angeles CA 90040 323 582 3322 323 832 9142 fax www elationlighting com info elationlighting com Elation Professional Junostraat 2 6468 EW Kerkrade Netherlands 31 45 546 85 66 Fax 31 45 546 85 96 www elationlighting eu info elationlighting eu2. INFORMATION Time Information Timer Password Display the timer password 038 1 YS x I Tap MODE ESC to access main menu tap UP DOWN LEFT RIGHT until Information is highlighted and tap ENTER Tap UP DOWN until Time Information is displayed and tap ENTER Tap UP DOWN until Timer Password is displayed and tap ENTER Tap UP DOWN to select 3 digit password and tap ENTER to confirm selection Tap MODE ESC to return to the main menu INFORMATION Time Information Clear Last Run Clear the last run time of the fixture default is OFF 10 Tap MODE ESC to access main menu tap UP DOWN LEFT RIGHT until Information is highlighted and tap ENTER 2 Tap UP DOWN until Time Information is displayed and tap ENTER 3 Tap UP DOWN until Clear Last Run is displayed and tap ENTER to Clear Last Run time NOTE A correct password must be entered in the Timer Password menu in order to clear last run time MODE ESC to return to the main menu INFORMATION Temperature Information Head Temperature Display the temperature of the fixture default is Celsius 1 Tap MODE ESC to access main menu tap UP DOWN LEFT RIGHT until Information is highlighted and tap ENTER 2 Tap UP DOWN buttons until Temperature Info is displayed and tap ENTER 3 Tap ENTER and degrees C F is displayed 4 Tap MODE ESC to return to the main menu 21 ELAR QUAD PANEL User Manual 1 0 EtAri0M www e
3. ETATION PROFESSIONAL 8 9 9 ELAR QUAD PANEL User Manual 1 0 www elationlighting com 2 ELAR QUAD PANEL User Manual 1 0 www elationlighting com CONTENTS 1 General Information oscars bts ire 0 4 4 1265 eum 4 Beeren 4 BOX EET 5 Customer 5 Warranty 6050 5 ii 6 3 General 2 7 8 5 Fixture etii 9 6 Mounting and 2 10 MOUNTING POINTS m 10 Sigo MER 11 7 12 DMX LINKING 12 DMX Cable 12 DMX Controller 2 2 13 DMX Terminator eee Sika cea 14 00 0 14 DMA 5 ORBE 15 3 Emu kidd 16 Menu FUNCUONS x22 inks cans 17 FUNCION ETT 19 Informatio 20 Personality e Desde te awed oa ru Pep
4. 16 ELAR QUAD PANEL User Manual 1 0 www elationlighting com Set DMX Address A001 AXXX DMX Address Setting DMX Value ALL DMX Value Display FUNCTION Slave Mode Slave1 Slave2 Slave3 Slave Setting Auto Program Master Alone Auto Program Current Time XXXX Hours Power On Running Time 7i Total Run Time XXXX Hours Fixture Running Time ime Last Run Time XXXX Hours Fixture Last Times Clear Information Timer Password Password XXX Timer Password 038 INFORMATION Clear Last Run ON OFF Clear Fixture Last time Temperature In The Temperature Info Head Temperature Head Software Version Software Version V1 0 Of Each IC Address Via Status Settings DMX ON OFF Address Via DMX No DMX Status Close Hold Auto Music Auto Run If No DMX Password Password XXX Service Password 050 Service Setting RDM PID XXXXXX RDM PID Code Shutoff Time 02 60m 05m Display Shut Off Time Flip Display ON OFF Display Reverse 180 Display Setting Key Lock ON OFF Key Lock PERSONALITY Disp Flash ON OFF Display Flashes If No DMX Celsius Temperature switch Temperature C F Fahrenheit Between or F Strobe Dimmer Chase Effect Chase Speed Red 1 16 Green 1 16 Initial Status Initial Effect Position Blue 1 16 White 1 16 Color Temp Color Mode Reset Default ON OFF Restore Factory Settings Strobe Dimmer Chase Effect EFFECT Chase Speed Red 1 16 Green 1 16 ADJUST Test Channel Test Functio
5. EtAri0M www elationlighting com INFORMATION Time Information Current Time Display the run time of the fixture from last power ON The counter is reset after each time the device is powered OFF 1 Tap MODE ESC to access main menu tap UP DOWN LEFT RIGHT until Information is highlighted and tap ENTER 2 Tap UP DOWN buttons until Time Information is displayed and tap ENTER 3 Tap UP DOWN until Current Time is displayed tap ENTER and XXXXXh Hours is displayed 4 Tap MODE ESC to return to the main menu INFORMATION Time Information Total Run Time Display the total running time of the fixture 1 Tap MODE ESC to access main menu tap UP DOWN LEFT RIGHT until Information is highlighted and tap ENTER 2 Tap UP DOWN until Time Information is displayed and tap ENTER 3 Tap UP DOWN until Total Run Time is displayed tap ENTER and XXXXXh Hours is displayed 4 Tap MODE ESC to return to the main menu INFORMATION Time Information Last Run Time Display last the running time of the lamp 1 Tap MODE ESC to access main menu tap UP DOWN LEFT RIGHT until Information is highlighted and tap ENTER 2 Tap UP DOWN until Time Information is displayed and tap ENTER 3 Tap UP DOWN until Last Run Time is displayed tap ENTER and XXXXXh Hours is displayed 4 Tap MODE ESC to return to the main menu 20 ELAR QUAD PANEL User Manual 1 0 PROFESSIONAL EtAri0M www elationlighting com
6. in this User s mode the Dimmer is in Channel 16 USER MODE SETTING User Mode Create user defined channel orders the default is 4CH Mode 1 MODE ESC to access the main menu tap UP DOWN LEFT RIGHT until User Mode Set is highlighted and tap ENTER Tap UP DOWN until User Mode is displayed and tap ENTER Tap UP DOWN to select desired mode 4CH Mode Mode 8CH Mode 1067 Mode 8 2CH Mode 16 4CH Mode 64CH Mode User Mode C User Mode B User Mode A and tap ENTER to confirm selection Tap MODE ESC to return to the main menu USER MODE SETTING Edit User Mode A B C Adjust the rest user defined channel order 1 Tap MODE ESC to access the main menu tap UP DOWN LEFT RIGHT until User Mode 56 is highlighted and tap ENTER Tap UP DOWN to select desired user User Mode A Edit User Mode B Edit User Mode C is displayed and tap ENTER Tap UP DOWN to select desired mode Channel Strobe Dimmer Chase Effect Chase Speed Red 1 16 Green 1 16 Blue 1 16 White 1 16 Color Temp Color Mode and tap ENTER to confirm selection Tap UP DOWN to select desired channel 01Ch 64Ch and tap ENTER to confirm selection Tap MODE ESC to return to the main menu 27 ELAR QUAD PANEL User Manual 1 0 EtAri0 www elationlighting com PROFESSIONAL EDIT PRO
7. 4 watt resistor that is connected between pins 2 and of a male XLR connector DATA and DATA This fixture is inserted in the female XLR connector of the last fixture in your daisy chain to terminate the line Using a line terminator Elation part DMX T PACK will decrease the possibilities of erratic behavior Termination reduces signal errors and avoids signal transmission problems and interference It is always advisable to connect a DMX terminal Resistance ML 120 Ohm 1 4 W between PIN 2 DMX 52 3 DMX of the last fixture 5 Pin XLR DMX CONNECTORS Some manufactures use 5 pin XLR connectors for DATA transmission in place of 3 pin 5 pin XLR fixtures may be implemented in a 3 pin XLR DMX line When inserting standard 5 pin XLR connectors in to a 3 pin line a cable adaptor must be used these adaptors are readily available at most electric stores The following chart details a proper cable conversion 3 Pin XLR to 5 Pin XLR Conversion Conductor 3 Pin XLR Female Out 5 Pin XLR Male Data True signal Pin 3 Not Used Pin 4 Do Not Use Not Used 5 6 14 ELAR QUAD PANEL User Manual 1 0 EtAri0 www elationlighting com PROFESSIONAL DMX ADDRESSING All fixtures should be given a DMX starting address when using a DMX controller so the correct fixture responds to the correct control signal This digital starting address is the channel number fr
8. F to 113 F 25 C to 45 C Do not use the fixture under or above this temperature e For added protection mount the fixture in areas outside walking paths seating areas or in areas were unauthorized personnel might reach the fixture Before mounting the fixture to any surface make sure the installation area can hold a minimum point load of 10 times the weight of the fixture 140Kgs 309 Lbs Fixture installation must always be secured with a secondary safety attachment such as an appropriate safety cable Never stand directly below the device when mounting removing or servicing the fixture MOUNTING POINTS e Overhead mounting requires extensive experience including amongst others calculating working load limits installation material being used and periodic safety inspection of all installation material and the device If you lack these qualifications do not attempt the installation yourself Improper installation can result in bodily injury e Be sure the fixture is kept at least 0 5m 1 5 feet away from any flammable materials decoration etc 10 ELAR QUAD PANEL User Manual 1 0 www elationlighting com i TE sg EUS PE N 1 Omega Bracket 2 Clamp 3 Turn Twist Locks SECURING e Secure the clamp to the bracket using a M12 screw fitted through the 13 center hole Insert the 74 Turn Twist Locks of the first Omega bracket into the respective holes
9. and tap ENTER 3 Tap UP DOWN to select desired mode Celsius or Fahrenheit and tap ENTER to confirm selection Tap MODE ESC to return to the main menu PERSONALITY Initial Status Display the initial effect position for DMX functions 1 Tap MODE ESC to access the main menu tap UP DOWN LEFT RIGHT until Personality is highlighted and tap ENTER 2 Tap UP DOWN until Initial Status is displayed and tap ENTER Tap UP DOWN to select desired function Strobe Dimmer Chase Effect Chase Speed Red 1 16 Green 1 16 Blue 1 16 White 1 16 Color Temp Color Mode and tap ENTER to confirm selection 4 Tap UP to select desired position 0 255 and tap ENTER to confirm selection 5 Tap MODE ESC to return to the main menu 25 ELAR QUAD PANEL User Manual 1 0 EraTiow www elationlighting com PROFESSIONAL PERSONALITY Reset Default Restore factory settings function ON or OFF the default is OFF 1 Tap MODE ESC to access the main menu tap UP DOWN LEFT RIGHT until Personality is highlighted and tap ENTER 2 Tap UP DOWN until Reset Default is displayed and tap ENTER 3 Tap UP DOWN to select desired mode ON or OFF and tap ENTER to confirm selection EFFECT ADJUST Test Channel Test each DMX function 1 MODE ESC to access the main menu tap UP DOWN LEFT RIGHT until Effect Adjust is highlighte
10. container If the unit is under warranty you must provide a copy of your proof of purchase invoice Items returned without a R A number clearly marked on the outside of the package will be refused and returned at customers expense You may obtain a R A number by contacting customer support at 323 582 3322 IMPORTANT NOTICE There are no user serviceable parts inside this unit Do not attempt any repairs yourself doing so will void your manufactures warranty Damages resulting from modifications to this fixture and or the disregard of safety and general user instructions found in this user manual void the manufactures warranty and are not subject to any warranty claims and or repairs 5 ELAR QUAD PANEL User Manual 1 0 www elationlighting com 2 SAFETY INSTRUCTIONS The ELAR QUAD PANEL is an extremely sophisticated piece of electronic equipment To guarantee a smooth operation it is important to follow the guidelines in this manual The manufacturer of this device will not accept responsibility for damages resulting from the misuse of this fixture due to the disregard of the information printed in this manual e For stage operation follow the Mounting and Installation guide described in Chapter 6 of this manual Operating the ELAR QUAD PANEL without suited safety aids such as safety cables and or clamps can increase the risk of damage and or personal injury e Installation should only be performed
11. ese LED 15 0 255 Green 0 Black 255 100 Green PACE 0 255 Blue 0 Black 255 100 Blue p WHITE LED 15 255 White 0 Black 255 100 White _ Red 0 Black 255 100 110 0 255 Green 0 Black 255 100 Green L 0 255 Blue 0 Black 255 100 Blue 0 255 White 0 Black 255 100 White pmo a 15 I ts ES Ec E iF ee lis T Ilo T 9 I 38 ELAR QUAD PANEL User Manual 1 0 EtAri0M www elationlighting com PROFESSIONAL 10 CLEANING AND MAINTENANCE CAUTION Disconnect from mains before starting maintenance operation CLEANING Frequent cleaning is recommended to insure proper function and an extended life Clean each LED lens weekly to avoid dust accumulation e Never use alcohol or solvents MAINTENANCE Regular inspections are recommended to insure proper function and an extended life There are no user serviceable parts inside this fixture please refer all other service issues to an authorized Elation service technician Should you need any spare parts please order genuine parts from your local Elation dealer Please refer to the following points during routine inspections Adetailed electric check by an approved electrical engineer every three months to make sure the circuit contacts are in good c
12. on the bottom of the device Tighten the Twist Locks a turn clockwise e Install the second Omega bracket on the top of the device in the same way e Pull safety cable through the holes on the bottom of the base and over the trussing system or a safe installation Notice This step is very important to ensure the fixture will not drop out by the damage of the clamp 11 ELAR QUAD PANEL User Manual 1 0 EtAri0M www elationlighting com PROFESSIONAL 7 UNDERSTANDING DMX DMX 512 DMX is short for Digital Multiplex This is a universal protocol used by most lighting and controller manufactures as a form of communication between intelligent fixtures and controllers DMX allows all makes and models of different manufactures to be linked together and operate from a single controller This is possible as long as all the fixtures and the controller are DMX compliant A DMX controller sends the DMX data instructions to the fixture allowing the user to control the different aspects of an intelligent light DMX data is sent out as serial data that travels from fixture to fixture via data IN and data OUT XLR terminals located on the fixtures most controllers will only have output jacks DMX LINKING To ensure proper DMX data transmission always use proper DMX cables and a terminator When using several DMX fixtures try to use the shortest cable path possible Never split a DMX line with a Y style connector The order in which
13. outdoor environments and has been designed with an enclosure that effectively protects the ingress entry of external foreign objects such as dust and water The International Protection IP rating system is commonly expressed as IP Ingress Protection followed by two numbers i e IP65 where the numbers define the degree of protection The first digit Foreign Bodies Protection indicates the extent of protection against particles entering the fixture and the second digit Water Protection indicates the extent of protection against water entering the fixture An IP65 rated lighting fixture such as the ELAR QUAD PANEL is one which has been designed and tested to protect against the ingress of dust 6 and high pressure water jets from any direction 5 UNPACKING Thank you for purchasing the ELAR QUAD by Elation Professional amp Every ELAR QUAD PANEL has been thoroughly tested and has been shipped in perfect operating condition Carefully check the shipping carton for damage that may have occurred during shipping If the carton appears to be damaged carefully inspect your unit for damage and be sure all accessories necessary to operate the unit have arrived intact In the event damage has been found or parts are missing please contact our customer support team for further instructions Please do not return this unit to your dealer without first contacting customer support at the number listed below Please do not discard the shi
14. the fixtures are connected in a DMX line does not influence the DMX addressing For example a fixture assigned a starting DMX address of 1 may be placed anywhere in the DMX chain at the beginning at the end or anywhere in the middle The DMX controller knows to send data assigned to address 1 to that fixture no matter where it is located in the DMX chain The ELAR QUAD PANEL be controlled via DMX 512 protocol The ELAR QUAD PANEL is a 64 channel DMX fixture The DMX address is set electronically using the controls on the LCD menu DATA CABLE DMX Cable REQUIREMENTS For DMX and Master Slave Operation Your fixture and your DMX controller require a standard 3 pin or 5 pin XLR connector for data input and data output see figure below If you are making your own cables be sure to use two conductor shielded digital DMX cable rated at 120 ohms this cable is designed for DMX transmission and may be purchased from your Elation dealer or at most professional lighting retailers Your cables should be made with a male and female XLR connector on either end of the cable Also remember that a DMX line must be daisy chained and cannot be split unless using an approved DMX splitter such as the Elation Opto Branch 4 or DMX Branch 4 12 ELAR QUAD PANEL User Manual 1 0 www elationlighting com DMX Output DMX Input DMX Output DMX Input 3 Pin XLR Socket 3 Pin XLR Socket 5 Pin XLR Socket 5 Pin XLR Socket 1 Ground
15. 0 www elationlighting com 14 2 YEAR LIMITED WARRANTY A Elation Professional hereby warrants to the original purchaser Elation Professional products to be free of manufacturing defects in material and workmanship for a period of two years 730 days from the date of purchase This warranty shall be valid only if the product is purchased within the United States of America including possessions and territories It is the owner s responsibility to establish the date and place of purchase by acceptable evidence at the time service is sought B For warranty service send the product only to the Elation Professional factory All shipping charges must be pre paid If the requested repairs or service including parts replacement are within the terms of this warranty Elation Professional will pay return shipping charges only to a designated point within the United States If the entire instrument is sent it must be shipped in its original package No accessories should be shipped with the product If any accessories are shipped with the product Elation Professional shall have no liability what so ever for loss of or damage to any such accessories nor for the safe return thereof C This warranty is void if the serial number has been altered or removed if the product is modified in any manner which Elation Professional amp concludes after inspection affects the reliability of the product if the product has been repai
16. 1 Ground 2 Data e 2 Data 3 Data 3 Data 4 Open 5 Open Be sure to follow the above figure when making your own cables Do not use the ground lug on the XLR connector Do not connect the cable s shield conductor to the ground lug or allow the shield conductor to come in contact with the XLR outer casing Grounding the shield could cause a short circuit and erratic behavior DMX 512 CONTROLLER CONNECTION Connect the provided XLR cable to the female 3 pin XLR output of your controller and the other side to the male 3 pin XLR input of the ELAR QUAD PANEL Please refer to the diagram below You can chain multiple panels together through serial linking The cable that should be used is two conductor shielded DMX cable with XLR input and output connectors Always be sure daisy chain your in and out data connections never split or Y your DMX connections unless you are using an approved DMX splitter such as the Elation Opto Branch 4 or DMX Branch 4 DMX512 gt n 120 Ohms DMX controller Address 1 Address 5 Address 9 13 ELAR QUAD PANEL User Manual 1 0 PROFESSIONAL EtAri0 www elationlighting com DMX 512 CONNECTION WITH DMX TERMINATOR A DMX terminator should be used in all DMX lines especially in longer runs The use of a terminator may avoid erratic behavior in your DMX line A terminator is a 120 ohm 1
17. 20 230 White Balance Disabled 231 254 White Balance Disabled Store a New White Balance 33 ELAR QUAD PANEL User Manual 1 0 2 www elationlighting com ELATION ELAR QUAD PANEL ver 1 0 DMX Channel Functions Values Mode Channel ERNI 0 255 255 Red 0 Black 255 100 Red ee 0 255 Green 0 Black 255 100 Green BLUE Group 1 0 255 Blue 0 Black 255 100 Blue WHITE Group 1 White 0 Black 255 100 White RED Group 2 Red 0 Black 255 100 Red GREEN Group 2 Green 0 Black 255 100 Green E BLUE Group 2 Blue 0 Black 255 100 Blue WHITE Group 2 255 White 0 Black 255 100 White 34 ELAR QUAD PANEL User Manual 1 0 EraTiow redu www elationlighting com ELATION ELAR QUAD PANEL ver 1 0 We Row Pn Group 1 _ Em SR corre EH Group 1 e 0 255 Green 0 Black 255 100 Green BLUE Group 1 0 255 Blue 0 Black 255 100 Blue Group 1 White 0 Black 255 100 White RED com 2 0 255 Red 0 Black 255 100 Red Group 2 Green 0 Black 255 100 Green BLUE Group 2 Blue 0 Black 255 100 Blue WHITE Group 2 White 0 Black 255 100 White _ pn 3 Res ace SOOT es Green 0 Black 255 100 Gree
18. 5 Red 0 Black 255 100 Red 255 Green 0 Black 255 100 Green _ 0 Black 255 100 Blue LI ILLI Ee 0 255 White 0 Black 255 100 White EU 0 255 Red 0 Black 255 100 Red 0 255 Green 0 Black 255 100 Green 4 0 255 Blue Black 255 100 Blue 0 Black 255 100 White 0 255 Red 0 Black 255 100 Red l 0 255 Green 0 Black 255 100 Green 4 0 255 Black 255 100 Blue 255 White 0 Black 255 100 White SUBE 0 Black 255 100 Red 1115 0 255 Green 0 Black 255 100 Green 37 ELAR QUAD PANEL User Manual 1 0 ETATIow rd www elationlighting com ELATION ELAR QUAD PANEL ver 1 0 DMX Channel Functions Values Ma 5i mma LED 13 0 255 Blue 0 Black 255 100 Blue 52 LED 13 0 255 White 0 Black 255 100 White 53 0 255 0 Black 255 100 ESSERE 0 255 Green 0 Black 255 100 Green BLUE LED 14 oe 0 255 100 Blue HS WHITE LED 14 0 255 White 0 Black 255 100 White ee LED 15 0 255 0 Black 255 100 58 7
19. Display Setting Key Lock Lock the Control Panel buttons automatically after exiting main menu for 15 seconds Unlock by keeping the MODE ESC button pressed for 3 seconds Default is OFF 1 Tap MODE ESC to access the main menu tap UP DOWN LEFT RIGHT until Personality is highlighted and tap ENTER 2 Tap UP DOWN until Display Setting is displayed and tap ENTER 3 Tap UP DOWN until Key Lock is displayed and tap ENTER 4 Tap UP DOWN to select desired mode ON or OFF and tap ENTER to confirm selection 5 Tap MODE ESC to return to the main menu 24 ELAR QUAD PANEL User Manual 1 0 EtAri0 www elationlighting com PROFESSIONAL PERSONALITY Display Setting Disp Flash Control Panel display will flash if no DMX is signal is detected default is OFF 1 Tap MODE ESC to access the main menu tap UP DOWN LEFT RIGHT until Personality is highlighted and tap ENTER 2 Tap UP DOWN until Display Setting is displayed and tap ENTER 3 Tap UP DOWN until Disp Flash is displayed and tap ENTER 4 Tap UP DOWN to select desired mode ON or OFF and tap ENTER to confirm selection Tap MODE ESC to return to the main menu PERSONALITY Temperature C F Display the temperature in Celsius or Fahrenheit default is Celsius 1 Tap MODE ESC to access the main menu tap UP DOWN LEFT RIGHT until Personality is highlighted and tap ENTER 2 Tap UP DOWN until Temperature C F is displayed
20. ED LED 5 0 Black 255 100 Red 48 aa GREEN LED 5 Green 0 Black 255 100 Green 19 Ey BLUE LED 5 Blue 0 Black 255 100 Blue HTE LED 5 0 Black 255 100 White Ez 6 0 255 Red 0 Black 255 100 22 LED 6 Green 0 Black 255 100 Green BLUE LED 6 255 3 0 Black 255 100 Blue 24 6 0 255 White 0 Black 255 100 White p RED LED 7 0 255 Red 0 Black 255 100 36 ELAR QUAD PANEL User Manual 1 0 ETATIow reu www elationlighting com ELATION ELAR QUAD PANEL ver 1 0 DMX Channel Functions Values f Function 8 05 0 0 0 _ 255 Black 255 100 Green Bie Ooch Black 255 100 Blue LT LLLI bes 0 255 White 0 Black 255 100 White 0 255 Red 0 Black 255 100 115 0 255 5 Black 255 100 Green LLL ELLE LED 8 0 255 Blue 0 Black 255 100 Blue Res 0 255 White 0 Black 255 100 White xL 255 Red 0 Black 255 100 Red Black 255 100 Green Is Eee ES 0 255 Blue 0 Black 255 100 Blue LL VV HTE 0 255 White 0 Black 255 100 White 0 25
21. GRAM Select Program Select Auto Programs default for Auto Pro Part1 is Program 1 for Auto Pro Part2 is Program 2 and for Auto Pro Part3 is Program 3 1 MODE ESC to access the main menu tap UP DOWN LEFT RIGHT until Edit Program is highlighted and tap ENTER Tap UP DOWN until Select Program is displayed and tap ENTER Tap UP DOWN to select desired Auto Program Part Auto Pro Part1 Auto Pro Part2 Auto Pro Part3 and tap ENTER to confirm selection Tap UP DOWN to select desired Program number Program 1 Program 10 and tap ENTER to confirm selection Tap MODE ESC to return to the main menu EDIT PROGRAM Edit Program Edit the internal programs 1 MODE ESC to access the main menu tap UP DOWN LEFT RIGHT until Edit Program is highlighted and tap ENTER Tap UP DOWN until Edit Program is displayed and tap ENTER 3 Tap UP DOWN to select desired Program number Program 1 Program 10 and tap ENTER to confirm selection Tap UP DOWN to select desired test or step Pro Test Step 01 Step 64 and tap ENTER to confirm selection Tap UP DOWN to select desired scene Sc001 Sc125 and tap ENTER to confirm selection MODE ESC to return to the main menu 28 ELAR QUAD PANEL User Manual 1 0 EtAri0M www elationlighting com PROFESSIONAL EDIT PROGRAM Edit Scenes Edit the scenes of the i
22. by qualified and certified personnel e When mounting this fixture use only the original rigging parts included with this fixture Any structural modification will void the original manufactures warranty and may increase the risk of damage and or personal injury e Those suffering from EPILEPSY should avoid looking directly into the light source of this unit at all times e Never look directly into the light source of this fixture You risk injury to your retina which may induce blindness e Never touch the fixture during normal operation This can cause severe personal injuries and or damage to the fixture e Always be sure the fan and air inlets remain clean and are never blocked Allow approx 6 15cm between this fixture and other devices or a wall to allow for proper cooling e Do not attempt to operate this fixture if the power cord has become damaged or frayed Be sure the power cord is never crimped and or damaged If the power cord is damaged replace it immediately with a new one of similar power rating e Be sure to unplug the ELAR QUAD PANEL from the power outlet before performing any service related issues e This device falls under protection class 1 therefore it is essential that this device be grounded properly Only qualified personnel should perform all electrical connections Be sure the available voltage matches the voltage requirements of this device e Always disconnect from main power source b
23. d and tap ENTER 2 Tap UP DOWN until Test Channel is displayed and tap ENTER 3 Tap UP DOWN to select desired function Strobe Dimmer Chase Effect Chase Speed Red 1 16 Green 1 16 Blue 1 16 White 1 16 Color Temp Color Mode and tap ENTER to confirm selection 4 Tap MODE ESC to return to the main menu EFFECT ADJUST Manual Control Adjust the lamp more easily All effects will be canceled the shutter opens and the dimmer intensity will be set to 100 With the individual functions you can focus the light on a flat surface wall and perform the fine lamp adjustment 1 Tap MODE ESC to access the main menu tap UP DOWN LEFT RIGHT until Effect Adjust is highlighted and tap ENTER 2 Tap UP DOWN until Manual Control is displayed and tap ENTER 3 Tap UP DOWN to select desired function Strobe Dimmer Chase Effect Chase Speed Red 1 16 Green 1 16 Blue 1 16 White 1 16 Color Temp Color Mode and tap ENTER to confirm selection 4 Tap UP to select desired value 0 255 and tap ENTER to confirm selection 5 Tap MODE ESC to return to the main menu 26 ELAR QUAD PANEL User Manual 1 0 EraTiow www elationlighting com PROFESSIONAL USER MODE SETTING Select different channels list by different sequence For example after the user enter this manual if select Auto Program CH 22 means
24. e qe 22 Effect Adj st sesers 26 User Mode 5 1 27 Edit Prograf 28 9 DMX Channel 5 Tree rede Ro DIR EP bree 33 10 Cleaning and 2 39 11 Photometric r a Ree RU A 40 12 Dimensional Drawings ione ad eben 40 Eee T 41 14 T 42 15 Technical Specifications to Cete 43 16 Optional Accessories 44 3 ELAR QUAD PANEL User Manual 1 0 www elationlighting com PROFESSIONAL 1 GENERAL INFORMATION INTRODUCTION Congratulations you have just purchased one of the most innovative and reliable lighting fixtures on the market today The ELAR QUAD PANEL has been designed to perform reliably for years when the guidelines in this booklet are followed Please read and understand the instructions in this manual carefully and thoroughly before attempting to operate this unit These instructions contain important information regarding safety during use and maintenance IP65 RATED An IP rated lighting fixture is one which is commonly installed in
25. e UP DOWN until Set DMX Address is displayed and tap ENTER 3 Current DMX address is displayed 001 509 tap the UP DOWN to select desired DMX address 001 509 and ENTER to confirm selection 4 Tap MODE ESC to return to the main menu FUNCTION DMX Value Display the DMX 512 value of each channel 1 Tap MODE ESC to access the main menu and tap ENTER 2 Tap UP DOWN until DMX Value is displayed and tap ENTER 3 Tap UP DOWN to select desired DMX Value and ENTER to confirm selection 4 Tap MODE ESC to return the main menu FUNCTION Slave Mode Define the fixture as a slave 1 Tap MODE ESC to access the main menu and tap ENTER 2 Tap UP DOWN until Slave Mode is displayed and tap ENTER 3 Tap UP DOWN to select desired mode Slave1 Slave2 Slave3 and tap ENTER to confirm selection 4 Tap MODE ESC to return to the main menu FUNCTION Auto Program Define the fixture mode Master or Alone for running Auto Programs Select the desired internal programs under Select Program set the number of steps under Edit Program and edit the individual scenes under Edit Scenes 1 MODE ESC to access the main menu and tap ENTER 2 Tap UP DOWN until Auto Program is displayed and tap ENTER 3 UP DOWN to select desired mode Master Alone and tap ENTER to confirm selection 4 Tap MODE ESC to return to the main menu 19 ELAR QUAD PANEL User Manual 1 0 PROFESSIONAL
26. ect the desired scene numbers You can program a maximum number of 250 scenes Press the ENTER button to confirm Press the MODE ESC button in order to return to the main menu Example Program 2 includes scenes 10 11 12 13 Program 4 includes scenes 8 9 10 Program 6 includes scenes 12 13 14 15 Auto Pro Part 1 is Program 2 Auto Pro Part 2 is Program 3 Auto Pro Part 3 is Program 6 31 ELAR QUAD PANEL User Manual 1 0 EtaTiow www elationlighting com EDIT PROGRAM Record Controller Working With Built In Program continued The 3 Slave groups run the Auto Program in certain time segments as shown in the following picture Part 1 Part 2 3 32 ELAR QUAD PANEL User Manual 1 0 reu www elationlighting com 9 DMX CHANNEL FUNCTIONS AND VALUES ELATION ELAR QUAD PANEL ver 1 0 DMX Channel Functions Values RED All LEDs 1 16 0 255 0 Black 255 100 Red GREEN All LEDs 1 16 0 255 Green 0 Black 255 100 Green LEDs 1 16 Blue 0 Black 255 100 Blue All LEDs 1 16 White 0 Black 255 100 White SHUTTER STROBE All LEDs 1 16 DIMMER INTENSITY All LEDs 1 16 0 255 Intensity 0 to 100 EE CHASE MACROS 7 CHASE SPEED 0 255 Value 0 to 255 COLOR TEMPERATURE All LEDs 1 16 7 COLOR MODE All LEDs 1 16 10 2
27. ection 5 Tap MODE ESC to return to the main menu 22 ELAR QUAD PANEL User Manual 1 0 EtAri0M www elationlighting com PROFESSIONAL PERSONALITY Service Setting Password The Password is 050 1 Tap MODE ESC to access the main menu tap UP DOWN LEFT RIGHT until Personality is highlighted and tap ENTER Tap UP DOWN until Service Setting is displayed and tap ENTER Tap UP DOWN until Password is displayed and tap ENTER Tap UP DOWN to select 3 digit password and tap ENTER to confirm selection Tap MODE ESC to return to the main menu x IS PERSONALITY Service Setting RDM PID With this function you can call up various submenus via RDM This device is RDM ready RDM stands for remote device management and makes remote control of devices connected to the DMX bus ANSI E1 20 2006 by ESTA specifies the RDM standard as an extension of the DMX512 protocol Manual settings like adjusting the DMX starting address are no longer needed This is especially useful when the fixture is installed in a remote area RDM ready and conventional DMX devices can be operated in one DMX line The RDM protocol sends own packages in the DMX512 data feed and does not influence conventional devices If DMX splitters are used and RDM control is to be used these splitters must support RDM The number and type of RDM parameters depend on the RDM controller being used NOTE A correct password must be entered in the Service Se
28. efore performing any type of service and or cleaning procedure Only handle the power cord by the plug end Never pull out the plug by tugging the wire portion of the cord 6 ELAR QUAD PANEL User Manual 1 0 EtAri0M www elationlighting com PROFESSIONAL 3 GENERAL GUIDELINES NEVER OPEN THIS FIXTURE WHILE IN USE During the initial operation of this fixture a light smoke or smell may emit from the interior of the fixture This is a normal process and is caused by excess paint in the interior of the casing burning off from the heat associated with the lamp and will decrease gradually over time This fixture is a professional lighting effect designed for use on stage in nightclubs theatres etc Do not attempt installation and or operation without proper knowledge of how to do so Do not permit operation by persons who are not qualified for operating this type of theatrical fixture Most damages are the result of operations by nonprofessionals e If this fixture is exposed to extreme temperatures due to environmental changes do not power the fixture on until it has reached room temperature Condensation could damage the fixture Consistent operational breaks may ensure the fixture will function properly for many years to come Do not shake fixture avoid brute force when installing and or operating the device When using quick release OMEGA Cam Lock system be sure the four quick lock fasteners are
29. lationlighting com PROFESSIONAL INFORMATION Software Version Display the software version of the fixture 1 Tap MODE ESC to access main menu tap UP DOWN LEFT RIGHT until Information is highlighted and tap ENTER 2 Tap UP DOWN until Software Version is displayed and tap ENTER 3 The display will show VX X software version 4 Tap MODE ESC to return to the main menu PERSONALITY Status Settings Address Via DMX Adjust the desired DMX address via an external controller default is ON 1 Tap MODE ESC to access the main menu tap UP DOWN LEFT RIGHT until Personality is highlighted and tap ENTER 2 Tap UP DOWN until Status Settings is displayed and tap ENTER 3 Tap UP DOWN until Address Via DMX is displayed and tap ENTER 5 Tap UP DOWN to select desired mode ON or OFF and tap ENTER to confirm selection 4 Tap MODE ESC to return to the main menu PERSONALITY Status Settings No DMX Status Fixture runs in Auto Run if no DMX signal is detected Options include Hold Close Shutter Music Control Auto Program default is Hold 1 Tap MODE ESC to access the main menu tap UP DOWN LEFT RIGHT until Personality is highlighted and tap ENTER 2 Tap UP DOWN until Status Settings is displayed and tap ENTER 3 Tap UP DOWN until No DMX Status is displayed and tap ENTER 4 Tap UP DOWN to select desired mode Hold Close Shutter Music Control Auto Program and tap ENTER to confirm sel
30. lay will flash If your fixture is connected to a DMX controller and the display is flashing not receiving a DMX signal please check the following The 3 PIN or 5 PIN XLR input plug cable with DMX signal from controller is not connected or is not inserted completely into the DMX input jack of the fixture The DMX controller is switched off or defective The DMX cable or connector is defective A DMX terminator has been inserted into the last fixture in your DMX chain 15 ELAR QUAD PANEL User Manual 1 0 www elationlighting com 8 FIXTURE MENU ON BOARD SYSTEM MENU The ELAR QUAD PANEL comes with an easy to navigate system menu The next section will detail the functions of each command in the system menu LCD CONTROL PANEL The control panel see image below located on back of the fixture allows you to access the main menu and make all necessary adjustments to the ELAR QUAD PANEL During normal operation tapping the MODE ESC button once will access the fixture s main menu Once in the main menu you can navigate through the different functions and access the sub menus with the UP DOWN RIGHT and LEFT buttons Once you reach a field that requires adjusting tap the ENTER button to activate that field and use the UP and Down buttons to adjust the field Tapping the ENTER button once more will confirm your setting You may exit the main menu at any time without making any adjustments by tapping the MODE ESC button
31. locked in the quick lock holes correctly Always install the fixture with an appropriate safety cable When installing the fixture in a suspended environment always use mounting hardware that is no less than M10 x 25 mm also be sure the hardware is insert in the pre arranged screw holes in the base of the fixture Please use the original packaging and materials to transport the fixture in for service 7 ELAR QUAD PANEL User Manual 1 0 EraTiow www elationlighting com PROFESSIONAL 4 FEATURES 16x 10W Cree Quad LEDs 100 000 Hours Rated LED Life May vary depending on several factors including but not limited to Environmental Conditions Power Voltage Usage Patterns On Off Cycling Control and Dimming IP65 Rated Die Cast Aluminum Body e USITT DMX 512 with 4 5 8 10 16 64 DMX Channel Operation e Strobe Effect with 1 18 flashes per second e 0 100 Dimming and Blackout for all LEDs Excellent Color Mixing and Rainbow Effect e Single Pixel Control Mode e Flicker Free Operation for TV and Film Built In Color Macros Auto amp Manual Control Full Color LCD Menu Control Display And Touch Panel Reversible Control Display Option 180 Flip Power In Out Linkable Max 2 units Holds Last State When Power Off e Software Upload by Optional Accessory via DMX line 8 ELAR QUAD PANEL User Manual 1 0 www elationlighting com 5 FIXTURE OVERVIEW 1 Mode Esc Button 2 LCD Me
32. n Blue 1 16 White 1 16 Color Temp Color Mode Manual Control Strobe XXX Fine Adjustment Of The Functions Default Settings Shaded 17 ELAR QUAD PANEL User Manual 1 0 www elationlighting com 4CH Mode 5CH Mode 8CH Mode 10CH Mode 8 2CH Mode Select User Mode 16_4CH Mode DMX amp User Modes USER MODE 64CH Mode SETTING User Mode A User Mode B User Mode C Max Channel Strobe Dimmer Chase Edit User Mode A Effect Chase Speed Red 1 16 Green Edit User Mode B Preset User Modes 1 16 Blue 1 16 White 1 16 Edit User Mode C Color Temp Color Mode Auto Pro Part1 Program 1 10 Program 1 Auto Pro Part2 Program 1 10 Select Programs Select Program Program 2 To Be Run Auto Pro Part3 Program 1 10 Program 3 Testing Program Program 1 Pro Test Edit Program Program In Loop Program 10 Step 01 Step 64 EDIT Save And Exit PROGRAM Strobe Dimmer Chase Effect Chase Speed Red 1 16 Save And Automatically Scene 001 Edit Scenes Green 1 16 Blue Return Manual Scene 125 1 16 White 1 16 Scenes Edit Color Temp Color Mode Automatic Scenes Record Controller Recorder Default Settings Shaded 18 ELAR QUAD PANEL User Manual 1 0 EtAri0M www elationlighting com PROFESSIONAL FUNCTION Set DMX Address Adjust the desired DMX address via the Control Panel 1 Tap MODE ESC to access the main menu and tap ENTER 2 Tap th
33. n L pos 0 Black 255 100 Blue pur Group 3 fe 0 255 White 0 Black 255 100 White L SL 0 255 Red 0 Black 255 100 Green 0 Black 255 100 Green 0 Black 255 100 Blue dei White 0 Black 255 100 White GROUP 4 GROUP 3 35 ELAR QUAD PANEL User Manual 1 0 reu www elationlighting com ELATION ELAR QUAD PANEL ver 1 0 ME RED LED 1 0 255 Red 0 Black 255 100 Red GREEN LED 1 0 255 Green 0 Black 255 100 Green _ BLUE LED 1 Blue 0 Black 255 100 Blue p WHITE LED 1 White 0 Black 255 100 White ges RED LED 2 Red 0 Black 255 100 Red GREEN LED 2 Green 0 Black 255 100 Green ME BLUE LED 2 Blue 0 Black 255 100 Blue O WHITE LED 2 0 255 White 0 Black 255 100 White RED LED 3 Red 0 Black 255 100 Red E GREEN LED 3 Green 0 Black 255 100 Green 22 BLUE LED 3 0 Black 255 100 Blue LED 3 0 255 White 0 Black 255 100 White em 0 Black 255 100 _ om Green T Black 255 100 Green is LL ELLE LED 4 0 255 Blue 0 Black 255 100 Blue 16 0 7 White 0 Black 255 100 White R
34. n to the warranty period set forth above And no warranties whether expressed or implied including warranties of merchantability or fitness shall apply to this product after said period has expired The consumer s and or Dealer s sole remedy shall be such repair or replacement as is expressly provided above and under no circumstances shall Elation Professional amp be liable for any loss or damage direct or consequential arising out of the use of or inability to use this product G This warranty is the only written warranty applicable to Elation Professional amp Products and supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore published 42 ELAR QUAD PANEL User Manual 1 0 www elationlighting com 15 TECHNICAL SPECIFICATIONS Power supply Voltage Requirements 100 240V 50Hz 60Hz Power Consumption 290 Watts Light Source Type 16 x 10W CREE QUAD LEDs Life time 100 000 Rated Hours May vary depending on several factors including but not limited to Environmental Conditions Power Voltage Usage Patterns On Off Cycling Control and Dimming Optical 12 Beam Angle 21 Field Angle Color Mixing RGBW Additive Color Mixing 16 7 Million Color Possibilities Strobe Dimmer Strobe effect with variable speed 1 18 flashes per second 0 100 Dimmer DMX Channels 4 5 8 10 87 16 64 DMX Drive USITT DMX 512 3 pin IP65 rated XLR
35. nternal programs 1 Tap MODE ESC to access the main menu tap UP DOWN LEFT RIGHT until Edit Program is highlighted and tap ENTER 2 Tap UP DOWN until Edit Scenes is displayed and tap ENTER 3 Tap UP DOWN to select desired scene number 001 125 and tap ENTER to confirm selection 4 Tap UP DOWN to select desired function Strobe Dimmer Chase Effect Chase Speed Red 1 16 Green 1 16 1 16 White 1 16 Color Temp Color Mode Fade Time Secne Time Input By Out and tap ENTER to confirm selection 5 Tap UP DOWN to select desired position 0 255 and tap ENTER to confirm selection For Secne Time tap UP DOWN to select the desired time 00 2s 99 9s and tap ENTER to confirm selection 6 Tap MODE ESC to return to the main menu EDIT PROGRAM Record Controller The moving head features an integrated DMX recorder by which you can transmit the programmed scenes from your DMX controller to the moving head Adjust the desired scene numbers via the encoder from to When you call up the scenes at your controller they will automatically be transmitted to the moving head EDIT PROGRAM Record Controller Working With Built In Program A Master unit can send up to 3 different data groups to the Slave units i e a Master unit can start 3 different Slave units which run 3 different programs The Master unit sends
36. nu Control Display 3 Left Button 4 Enter Button 5 Up Button 6 Right Button 7 Down Button 8 Power In 9 Power Out 10 3 Pin DMX In 11 3 Pin DMX Out Mode Esc Button Used to access the menu functions and exit the current command LCD Menu Control Display Full color LCD animated menu display Left Button Used to toggle through the menu display Enter Button Used to enter into or lock a certain menu function Up Button Used to toggle forward through the menu functions and settings Right Button Used to toggle through the menu display Down Button Used to toggle down or back through the menu functions and settings Power In Power connection to power source 1 2 3 4 5 6 7 8 9 Power Out Power connection to daisy chain to another unit 10 3 Pin DMX In Accepts incoming DMX signal via a male 3 pin XLR jack 11 3 Pin DMX Out Used to send incoming DMX signal to the next fixture in the DMX chain via a female 3 pin XLR jack 9 ELAR QUAD PANEL User Manual 1 0 EraTiow www elationlighting com PROFESSIONAL 6 MOUNTING AND INSTALLATION CAUTION Please consider the GB7000 15 EN60598 2 17 and the other respective national norms during the installation The installation must only be carried out by a qualified person CAUTION The electric connection must only be carried out by a qualified electrician CAUTIONS The recommended temperature for this fixture is 13
37. om which the fixture starts to listen to the digital control information sent out from the DMX controller The allocation of this starting DMX address is achieved by setting the correct DMX address on the digital display located on the back of the fixture You can set the same starting address for all fixtures or a group of fixtures or set different address for each individual fixture Be advised that setting all fixtures to the same DMX address will subsequently control all fixtures in the same fashion in other words changing the settings of one channel will affect all the fixtures simultaneously If you set each fixture to a different DMX address each unit will start to listen to the channel number you have set based on the quantity of control channels DMX channels of each fixture That means changing the settings of one channel will only affect the selected fixture In the case of the ELAR QUAD PANEL when in 64 channel mode default can also be set to 4 5 8 10 82 or 16 you should set the starting DMX address of the first unit to 1 the second unit to 65 64 1 the third unit to 129 64 65 the fourth unit to 193 64 129 and so on Note During start up the ELAR QUAD PANEL will automatically detect whether a DMX data signal is being received or not If DMX data signal is being received the display will show Addr XXX XXX representing the actual DMX address If the fixture is not receiving a DMX signal the disp
38. ondition and prevent overheating Besure all screws and fasteners are securely tightened at all times Lose screws may fall out during normal operation resulting in damage or injury as larger parts could fall Check for any deformations on the housing color lenses rigging hardware and rigging points ceiling suspension trussing Deformations in the housing could allow for dust to enter into the fixture Damaged rigging points or unsecured rigging could cause the fixture to fall and seriously injure a person s Electric power supply cables must not show any damage material fatigue or sediments Never remove the ground prong from the power cable 39 ELAR QUAD PANEL User Manual 1 0 reu www elationlighting com 11 PHOTOMETRIC DATA Beam angle 12 Field angle 21 Intensity LUX Red leds 2916 1044 476 Green leds 4650 1702 782 Blue leds 843 883 136 White leds 5630 1954 902 Full leds 12170 4316 1956 4 2 Beam opening m o N 4 2 5 5 7 5 Distance m 0 52 1 04 1 56 12 Diameter m 0 9 1 8 27 21 Diameter m 12 DIMENSIONAL DRAWINGS millimeters 250 7 MAN MAN Please Note Specifications and improvements the design of this unit and this manual are subject to change without any prior written notice 40 ELAR QUAD PANEL User Manual 1 0 www elationlighting com 13 CIRCUIT SCHEMATIC 41 ELAR QUAD PANEL User Manual 1
39. pping carton in the trash Please recycle whenever possible 4 ELAR QUAD PANEL User Manual 1 0 www elationlighting com PROFESSIONAL BOX CONTENTS 1 68 Rated Power Cable 1 3 Pin XLR Cable 2 Omega Clamps 1 Safety Cable Manual amp Warranty Card MANUAL UPDATES Please check www elationlighting com for the latest revision update of this manual CUSTOMER SUPPORT Elation Professionale provides a customer support line to provide set up help and to answer any question should you encounter problems during your set up or initial operation You may also visit us on the web at www elationlighting com for any comments or suggestions For service related issue please contact Elation Professional amp Service Hours are Monday through Friday 8 00 a m to 5 00 p m PST Voice 323 582 3322 Fax 323 832 9142 E mail support elationlighting com Forum www ElationLighting com forum WARRANTY REGISTRATION The ELAR QUAD PANEL carries a two year 730 days limited warranty Please fill out the enclosed warranty card to validate your purchase All returned service items whether under warranty or not must be freight pre paid and accompany a return authorization R A number The R A number must be clearly written on the outside of the return package A brief description of the problem as well as the R A number must also be written down on a piece of paper and included in the shipping
40. red or serviced by anyone other than the Elation Professional amp factory unless prior written authorization was issued to purchaser by Elation Professional if the product is damaged because not properly maintained as set forth in the instruction manual D This is not a service contract and this warranty does not include maintenance cleaning or periodic check up During the period specified above Elation Professional will replace defective parts at its expense and will absorb all expenses for warranty service and repair labor by reason of defects in material or workmanship The sole responsibility of Elation Professional amp under this warranty shall be limited to the repair of the product or replacement thereof including parts at the sole discretion of Elation Professional All products covered by this warranty were manufactured after January 1 1990 and bare identifying marks to that effect E Elation Professional amp reserves the right to make changes in design and or improvements upon its products without any obligation to include these changes in any products theretofore manufactured F No warranty whether expressed or implied is given or made with respect to any accessory supplied with products described above Except to the extent prohibited by applicable law all implied warranties made by Elation Professional amp in connection with this product including warranties of merchantability or fitness are limited in duratio
41. ss the ENTER button to confirm Press the MODE ESC button in order to return to the main menu 3 Program selection for Auto Pro Part Select Edit Program by turning the encoder Press the ENTER button to confirm Select Select Programs by turning the encoder Press the ENTER button to confirm Turn the encoder to select Auto Pro Part 1 Auto Pro Part 2 or Auto Pro Part 3 and thus select which Slave program is to be sent Selection Part 1 means that the Slave unit runs the same program as the master units Press the ENTER button to confirm Press the MODE ESC button in order to return to the main menu 30 ELAR QUAD PANEL User Manual 1 0 EtAri0M www elationlighting com PROFESSIONAL EDIT PROGRAM Record Controller Working With Built In Program continued 4 Program Selection for Edit Program e Select Edit Program by turning the encoder Press the ENTER button to confirm Select Edit Program by turning the encoder Press the ENTER button to confirm Turn the encoder to select the desired program With this function you can edit specific scenes into a specific program Press the ENTER button to confirm Press the MODE ESC button in order to return to the main menu 5 Automatic Scene Recording Select Edit Program by turning the encoder Press the ENTER button to confirm e Select Edit Scenes by turning the encoder Turn the encoder to sel
42. the 3 program parts in a continuous loop Auto Pro Auto Pro Auto Pro Auto Pro Auto Pro Auto Pro Auto Pro Auto Pro Auto Pro Part 1 Part 2 Part 3 Part 1 Part 2 Part 3 Part 1 Part 2 Part 3 The Slave unit receives data from the Master unit according to the group which the Slave unit was assigned to If e g a Slave unit is set to Slave 1 in the menu Set to Slave the Master unit sends Auto Program Part 1 to the Slave unit If set to Slave 2 the Slave unit receives Auto Program Part 2 29 ELAR QUAD PANEL User Manual 1 0 EtAri0M www elationlighting com PROFESSIONAL EDIT PROGRAM Record Controller Working With Built In Program continued To start an Auto Program proceed as follows 1 Slave Setting Select Function Mode by turning on the encoder Press the ENTER button to confirm e Select Set to Slave by turning the encoder Press the ENTER button to confirm Turn the encoder to select Slave 1 Slave 2 or Slave 3 Press the ENTER button to confirm Press the MODE ESC button in order to return to the main menu 2 Automatic Program Run Select Function Mode by turning on the encoder Press the ENTER button to confirm Select Auto Program by turning on the encoder Press the ENTER button to confirm Turn the encoder to select Master or Alone The selection Alone means Stand Alone mode and Master that the device is defined as master Pre
43. tting menu in order to access the RDM PID menu 1 Tap MODE ESC to access the main menu tap UP DOWN LEFT RIGHT until Personality is highlighted and tap ENTER 2 Tap UP DOWN until Service Setting is displayed and tap ENTER 3 Tap UP DOWN until RDM PID is displayed and tap ENTER 4 MODE ESC to return to the main menu 23 ELAR QUAD PANEL User Manual 1 0 www elationlighting com PERSONALITY Display Setting Shutoff Time Shut off the Control Panel display after 02 to 60 minutes default is 05 minutes 1 Tap MODE ESC to access the main menu tap UP DOWN LEFT RIGHT until Personality is highlighted and tap ENTER Tap UP DOWN until Display Setting is displayed and tap ENTER Tap UP DOWN until Shutoff Time is displayed and tap ENTER Tap UP DOWN to select time 02 60 and tap ENTER to confirm selection Tap MODE ESC to return to the main menu 8 5 PERSONALITY Display Setting Display Reverse Rotate Flip the Control Panel display by 180 default is OFF 1 Tap MODE ESC to access the main menu tap UP DOWN LEFT RIGHT until Personality is highlighted and tap ENTER 2 Tap UP DOWN until Display Setting is displayed and tap ENTER 3 Tap UP DOWN until Display Reverse is displayed and tap ENTER 4 Tap UP DOWN to select desired mode or OFF and tap ENTER to confirm selection 5 Tap MODE ESC to return to the main menu PERSONALITY
Download Pdf Manuals
Related Search