ESIM110
Contents
1. 2147483648 Example 1111_EXPIRY_UserName1_12 Check Expiry In order to check the set expiry date amp time value for a particular user send the SMS message Date amp Time It is possible to check the expiry date amp time by user name or by phone number SMS text g XXXX_EXPIRYTIME_37011111111_ Or XXXX_EXPIRYTIME UserName Example 1111_EXPIRYTIME_UserName1_ Enable Scheduler s for User sets a period of time according to which a particular user gains access to output control It is possible to enable the scheduler by user name or by phone number For more details on how to set the schedulers please refer to chapter 2 6 Scheduler Settings SMS text g XXXX_NSCHED_37011111111_1 ON_2 ON_3 ON_4 ON_5 ON 6 ON_7 ON_8 ON Or XXXX_NSCHED UserName_1 ON_2 ON_3 0ON 4 ON_5 ON_6 ON_7 ON_8 ON Example 1111_NSCHED_37011111111_2 ON_3 ON_8 ON The user database allows to enable one or several schedulers by their number The scheduler MANUAL ELDES ESIM110 V2 0 15 Disable Scheduler The user database allows to disable one or several schedulers by their number The scheduler s for User sets a period of time according to which a particular user gains access to output control It is possible to disable the scheduler s by user name or by phone number For more details on how to set the schedulers please refer to 2 6 Scheduler Settings SMS text g XXXX_NSCHED 37011111111_2. iP add poss 84 32 1341 ELDES server parameter It is recommended not to change this default Client parameter lport XXXX 5000 Computer TCP port used for communication with the device Server imeo t Seg 20 Time of one session when this period expires the administrator has to Both connect anew using new connection data protocol TCP UDP TCP Data transmission protocol It is recommended not to change this default Both parameter Son 7 _ GPRS diversion point provided by the GSM operator of the used SIM card Both P Entered only in the case if GSM operator requires it user GPRS username Entered only in the case if GSM operator requires it Both psw GPRS user password Entered only in the case if GSM operator requires it Both indicates in which working mode selected parameter is required Examples how to create SMS messages To update standard GPRS parameters with a new one send SMS message in the following format XXXX_setgprs Settings Parameters Here in the place of Settings and Parameters enter the corresponding commands from Table 1 For example sending SMS message 0001 setgprs type server you indicate to ESIM110 to work in Server mode from the next session MANUAL ELDES ESIM110 V2 0 27 To activate GPRS connection with unique GPRS parameters only for the upcoming session send the ollowing SMS message XXXX_connect Settings Parameters Here in the place of Se
3. configure and control the system using SMS message send the text command to the ESIM110 system phone Primary Configuration 1 Set the system language Please refer to chapter 2 1 System Language for more details 2 Once the SMS reply confirming the successful language setup is received proceed to chapter 2 2 SMS Password 3 Otherwise check the GSM network connection of the system by making a call to the system from any mobile phone The SMS reply asking to change the password confirms that GSM signal present 4 In other case change the SMS centre phone number SMS centre number is stored in SIM card by the GSM operator therefore if SIM card has already been successfully used to send SMS messages over a mobile phone then it is not necessary to change SMS centre number SMS Centre Phone Number In order to change enter SMS centre number send the following SMS message to the system SMS text g XXXX_SMS_ 37011111111 Example 1111_SMS_ 37069899992 MANUAL ELDES ESIM110 V2 0 2 1 System Language Language in which the system communicates with the user by SMS messages The language must be set before changing factory default SMS password therefore SMS password is not required in the following SMS message Set Language SMS text g Lb Value LL language index range LT Lithuanian RU Rus sian EN English EE Estonian Example EN 2 2 SMS Password All SMS comm
4. current database users List Users To receive the list containing added database users send the following SMS message SMS text g XXXX_GETALLNUMBERS Example 1111_GETALLNUMBERS ATTENTION Depending on entered user numbers and or user names you might receive more than 55 SMS messages MANUAL ELDES ESIM110 V2 0 This feature allows to erase a particular user or several users from the database It is possible to Delete User s delete a user s by user name or by phone number SMS text B XXXX_D 37011111111 Or XXXX_D UserName Example 1111_D 37011111111_UserName2_UserName3 This feature allows to erase all users from the database not the administrator numbers at Delete All Users once SMS text B XXXX_D ALL Example 1111_D ALL This feature allows to search for a user in the database It is possible to search for user by user Search for User name or by phone number SMS text B XXXX_T 37011111111 Or XXXX_T UserName Example 1111_T UserName1 NOTE Only one user name phone number can be searched at a time Disable User Database database is enabled T The system allows to disable user database in order to deny output control even by users stored in the database In order to do this send the following SMS message By default user SMS text g XXXX_DBM_OFF Example 1111_DBM_OFF Enable User In order to enable user database send the following SMS m
5. manufacturer s website www eldes It 28 MANUAL ELDES ESIM110 V2 0 29 Made in Lithuania www eldes it
6. range 00 59 MO Monday TU Tuesday WE Wednesday TH Thursday FR Friday SA Saturday SU Sunday AL always Example 1111_SCHED3_UserName1_ST 15 34_EN 18 23_ MO ON_FR ON Set Scheduler This SMS message sets the time period and disables one or several weekdays for the particular Disable Weekdays scheduler SMS text g XXXX_SCHEDx ST HH MM EN HH MM MO OFF_ TU OFF WE OFF_TH OFF_FR OFF_SA OFF_SU OFF_AL OFF Value x schduler number range 1 8 ST start time of time period EN end time of time period HH hours range 00 23 MM minutes range 00 59 MO Monday TU Tuesday WE Wednesday TH Thursday FR Friday SA Saturday SU Sunday AL always Example 1111_SCHED2_ST 08 15_EN 18 00_TU OFF_WE OFF SU OFF NOTE Several weekdays for particular scheduler can be enabled and disabled at once by sending one SMS message Example 1111_SCHED5_ST 09 20_EN 15 43_MO ON_TU OFF_SA OFF NOTE When AL always parameter is enabled other weekday parameters become inactive MANUAL ELDES ESIM110 V2 0 17 2 7 Output Configuration Manufacturer default output name C1 Controller1 The length of output name can be up Output Name to 10 characters including space symbol Send the following SMS message in order to set a new output name SMS text g XXXX_C1 NewOutpuName Example 1111_C1 GATES NOTE Semi colon characters parameter names and or
7. values are not allowed in output names eg PSW STATUS ON OFF etc Turn ON Output This feature turns on the output and changes the output startup state to normally closed NC Output Startup State NC at the same time It is possible to turn on the output by output number or by output name SMS text g XXXX_C1 ON Or XXXX_OutputName ON Example XXXX_C1 0N This feature turns off the output and changes the output startup state to normally closed NC Turn OFF Output Output Startup State NO at the same time It is possible to turn off the output by output number or by output name SMS text g XXXX_C1 OFF Or XXXX_OutputName OFF Example XXXX_Gates OFF After the user makes phone call to the relay connectors of output are in normally closed state NC for a set duration value After this duration is over the relay connectors of the output switches back to normally opened NO state By default output pulse duration is 2 seconds Output Pulse Duration Relay Delay S SMS text z XXXX_TIMER TT Value TT pulse duration in seconds range 1 10 Example XXXX_TIMER 5 No A Ga a D Enable Scheduler The user database allows to enable one or several schedulers by their number The scheduler s for Output sets a period of time according to which the output is turned on off For more details on how to set the schedulers please refer to chapter 2 6 Scheduler Setting
8. 1 0FF_2 0FF_3 OFF_4 0FF_5 0 FF_6 OFF_7 OFF_8 OFF Of XXXX_NSCHED_UserName 1 0FF_2 OFF_3 0OFF_4 O0FF_5 0FF_6 0FF_7 0FF_8 0FF Example 1111_NSCHED_UserName1_4 OFF_6 OFF_7 OFF_8 OFF NOTE Several schedulers can be enabled and disabled for particular user at once by sending one SMS message Example 1111_NSCHED_UserName1_1 ON_4 OFF_6 ON In order to check which scheduler s is enabled disabled for a particular user send the SMS Check Scheduler s message It is possible to check the scheduler by user name or by phone number SMS text g XXXX_NSCHED 37011111111_ Or XXXX_NSCHED UserName_ Example 1111_NSCHED_37011111111_ 2 6 Scheduler Settings Set Scheduler The system supports up to 8 schedulers according to which the database user s gains access Enable Weekdays to control the output In addition the schedulers are used for automatic output on off action The starting and ending of time period can be configured for each scheduler It is also pos sible to set the frequency by weekdays on which the time period of the particular scheduler is valid This SMS message sets the time period and enables one or several weekdays for the particular scheduler SMS text g XXXX_SCHEDx ST HH MM EN HH MM MO ON TU on WE ON TH ON _FR ON SA ON SU ON AL ON Value x schduler number range 1 8 ST start of time period EN end of time period HH hours range 00 23 MM minutes
9. NR5 DEL 2 4 Date amp Time Settings It is important to set correct date and time so that the system can send reports at specified Date amp Time times Date and time can be set by sending the following SMS message SMS text a XXXX_YYYY MM DD_HH MM Value YYYY year MM month range 01 12 DD day range 01 31 HH hours range 00 23 MM minutes range 00 59 Example 1111_2011 12 01_14 15 2 5 User Database Management NOTE Database users can be managed by administrator s only Add User rA eS ee The system supports up to 500 different database users 1000 optional which gain access to control the output gates or any other electric appliance connected to the output by making phone call to the system User entry in the database consists of phone number mandatory user name not mandato ry and additional parameters All user numbers must be entered starting with international country code e g 44 area code local number The plus symbol is not necessary Phone number length up to 15 digits Length of user name up to 16 characters SMS text g XXXX_N 37011111111 UserName or XXXX N 37011111111 Example 7777_N 37011111111 UserName1_37011111112 _ 37011111113 UserName2 NOTE After adding all 500 users 1000 optional to the database the system will not allow to add any more users In order to add a different user please delete one or more
10. RESTART 24 3 Appendix 3 1 Restoring Default Parameters To restore the default parameters 1 Disconnect power supply and USB cable Short circuit connect D1 and D2 pins Power up ESIM110 for 7 seconds Disconnect power supply Remove short circuit from D1 and D2 pins Power up ESIM110 Parameters reset to default Pa oE E E ad 3 2 Eldes Configuration Tool software To configure the system quicker and easier as well as to use more system capabilities please install configuration software ELDES Configuration Tool which can be downloaded from ELDES website at www eldes lt Before connecting USB cable to the computer please read ELDES Configuration Tool user guide available in the HELP section of the software 3 3 Remote System Configuration via GPRS Connection 3 3 1 How to connect to ESIM110 through www eldes lt website In order to connect to ESIM110 using your web browser ensure the following conditions ESIM110 is with a SIM card placed in it Power supply is connected The default 4 digit password is changed to a new one and your mobile number is uploaded as administrator mobile number The device isn t connected to computer with USB cable Activate GPRS connection between ESIM110 and the server Use default settings 1 to connect to ESIM110 through www eldes It website If default settings is changed set ESIM110 to work in Client mode and make sure that GPRS server parameters is set to default To sele
11. V 200mA max Current used in standby model not more than 50mA GSM modem frequency 850 900 1800 1900 MHz Number of outputs 1 Output type NO relay Number of low level negative inputs 2 Number of high level positive inputs 1 Allowable low level negative input values Voltage 0 16V current 0 8 0 4mA Allowable high level positive input values Voltage 5 50V current 0 17 1 7mA Relay output maximum commutating values 24V 1A 24V 50Hz 0 5A Dimensions 70x85x57mm Operating temperature range 20 55 C 30 55 C with limitations Number of administrators 5 Number of users 500 1000 optional 1 4 Connector and LED Indicators Functionality Short explanation of the main units LED1 O LED2 O Oo o o DEFAULT D1 D2 Fig No 1 LED2 status Meaning OFF No network connection GSM MODEM GSM network 850 900 1800 1900 MHz modem SIM CARD SIM card LED Light emitting diodes indicator DEFAULT Connectors D1 and D2 for restoring default settings ANT GSM antenna SMA type connector USB Mini USB connector F1 Fuse Connector functionality Labeling Explanation AC DC Power supply pins RELAY C1 dry relay contact Normally open NO COM Common pin Z5 Not Connected Z4 Not Connected Z3 Low level input Z3 Z High level input Z2
12. Z1 Low level input Z1 LED indicators functionality LED1 Indicates SIM card status LED2 Indicates network Blinking 1 times per second Poor network connection Blinking 3 time per second Medium network connection ON Excellent network connection 1 5 Connection Circuit ESIM 110 RELAY COM o Gate automatics device NOTE Fig No 2 status LED1 status Meaning OFF SIM card is wor king properly ON SIM card error Although the installation of system ESIM110 is not complex we highly recommend installing the device only in the case if you have minimal electrotechnical or electronics knowledge Otherwise you can damage the device MANUAL ELDES ESIM110 V2 0 1 6 System Installation The system can be installed only in a metal or non flammable plastic enclosure If the metal enclosure and transformer is used it is necessary to ground the enclosure using yellow green colour cable For the connection of 230V transformer use 3x0 75 mm 1 thread double isolated cable The primary circuit of the transformer must be connected through 0 5A fuse 230V power supply cables cannot be grouped with low voltage cable group For the connection of power supply and output connectors use 1 thread 2x0 75 mm cable For the connection of input output connectors use 0 50 mm 1 thread cable ili Place the SIM card into the card holder and make sure that PIN code request is d
13. ands start with a 4 digit password Manufacturer default password is 0000 four Set SMS Password zeros which is necessary to change Non numerical characters like letters dots colons spa ces are not allowed SMS text B 0000 PSW_XXXX Value XXXX new 4 digit SMS password Example 0000_PSW_1111 2 3 Administrator Phone Numbers The system supports up to 5 administrator phone number entries allowing full system con figuration and control including output control User 1 phone number is mandatory while other phone number entries are not necessary All numbers must be entered starting with international country code e g 44 area code local number The plus symbol is not necessary Phone number length up to 15 digits Add Administrator Numbers SMS text g XXXX_NR1 37011111111_NR2 37011111112_ NR3 37011111113_NR4 37011111114 NR5 37011111115 Example 11171_NR1 37011111111_NR3_37011111113 List Administrator receive the list containing added administrator numbers send the following SMS message Numbers SMS text g XXXX_HELPNR Example 1111_HELPNR MANUAL ELDES ESIM110 V2 0 Delete Administrator This SMS message erases a particular or several administrator phone numbers at once The Numbers system will not allow erasing of the User 1 phone number This number can only be modified SMS text g XXXX NR2 DEL NR3 DEL NR4 DEL NR5 DEL Example 1111_NR4 DEL_
14. both for users and for ESIM364 system in order to ad assure fast and reliable SMS message delivery and phone call connection ja Even though alarm system ESIM364 installation process is not too complicated we still recommend to perform it by a person with basic knowledge in electrical engineering and electronics to avoid any system damage 2 System Pre operation Control amp Configuration ATTENTION In this user manual the underscore symbol _ represents one space character Every underscore symbol must be replaced by a single space character There must be no spaces or other unnecesary characters at the beginning and at the end of the message XXXX 4 digit SMS password the default SMS password is 0000 four zeros Software ELDES Configuration Tool is intended to work directly with ESIM110 system which can be connected to the compu ter via USB port or via GPRS connection remotely This software simplifies system configuration process by allowing to use a personal computer in the process Before starting to use ELDES Configuration Tool please read user guide available in the software s HELP section and refer to chapter 3 3 Remote System Configuration via GPRS Connection number from one of the preset user phone numbers The structure of SMS message consists of 4 digit SMS password the default SMS password is 0000 four zeros the parameter and value For some parameters the value does not apply i e STATUS i In order to
15. ct Client mode send SMS message with the following text XXXX_setgprs type client Activate GPRS connection using standard or one time GPRS parameters To use standard GPRS parameters send SMS message with the following text XXXX_connect profilel Here profile1 is the default name of your standard GPRS parameters By default ESIM110 connects to ELDES server and establishes a 20 minutes long session To use one time GPRS parameters for example send SMS message with the following text XXXX_connect timeout MM Here MM time duration in minutes In the example above ESIM110 will connect to ELDES server and session will be activated for MM minutes The system generates and sends login details to your mobile telephone Open www eldes t login webpage in your web browser and login with received username and password MANUAL ELDES ESIM110 V2 0 25 Make configurations to the device update users database or and review the device activity summary To work properly using configurations web interface you should wait while webpages is fully downloaded to your web browser before doing other actions Stop the session If connection session hasn t ended before you closed configurations webpage send SMS message in the following format XXXX_stop 1 check Table 1 and examples 2 Device will use standard or one time GPRS parameters to connect with a server Standard GPRS parameters can be
16. eldes e N az P ESIM110 User Manual v2 0 Safety instructions Please read and follow these safety guidelines and assembly instructions in order to maintain safety of operators and people around amp GSM control system ESIM110 further referenced as the system or device contains an integrated radio transceiver operating in GSM 850 900 1800 1900 MHz bands DO NOT use the system where it can interfere with other devices and cause any potential danger DO NOT mount the system next to medical equipment or devices if they require so DO NOT use the system in hazardous environment DO NOT expose the system to high humidity chemical environment or mechanical impacts DO NOT attempt to personally repair the system System label is on the bottom side of the device System ESIM110 is a device mounted in limited access areas Any system repairs must be done only by qualified safety aware personnel Mains power must be disconnected before any installation or tuning work starts The system installation or maintenance must not be done during stormy conditions The system must be powered by main 10 24V 50Hz 200mA AC or 10 24V 200mA DC power supply which must be approved by LST EN 60950 1 standard and be easily accessible nearby the device When connecting the power supply to the system switching the terminals places does not have any affect Any additional devices linked to the system ESIM110 computer sensors relays etc m
17. essage Database SMS text XXXX_DBM_ON Example 1111_DBM_ON gt MANUAL ELDES ESIM110 V2 0 Ring Counter feature sets the user validity limit according to the quantity of allowed phone Set Ring Counter calls to the system After the set quantity of phone calls is depleted the user is deleted from the database It is possible to set the ring counter by user name or by phone number SMS text z XXXX_RCOUNT_37011111111_ or XXXX_RCOUNT UserName_ Example 1111_RCOUNT_ UserName1_ This feature sets the user validity limit according to the deadline by a particular date and time After the set date and time comes the user is deleted from the database It is possible to set Set Expiry Date amp Time the expiry date amp time by user name or by phone number SMS text g XXXX_EXPIRYTIME 37011111111_YYYY MM DD_HH MM or XXXX_EXPIRYTIME UserName YYYY MM DD_ HH MM Value YYYY year MM month range 01 12 DD day range 01 31 HH hours range 00 23 MM minutes range 00 59 Example 1111_EXPIRYTIME_37011111111_2011 10 15 16 43 XM J Extend Shorten The expiry time in minutes can be extended or shortened for a particular user It is possible to extend shorten expiry time by user name or by phone number Expiry Time SMS text g XXXX_EXPIRY_37011111111_Z Or XXXX_ EXPIRY UserName _Z Value Z time in minutes range 0
18. hone Number Enable Control from Any Phone Number Disable Control from Any Phone Number The system is designed that the system can be configured and controlled only by the admi nistrator users and users stored in the database However it is possible to activate a mode allowing the system to be configured by any user knowing the correct SMS password and controlled by any caller to the system phone number In order to enable this feature send the following SMS message N SMS text g XXXX_ALLNUM ON Example 1111_ALLNUM ON N In order to disable control from any phone number send the following SMS message SMS text z XXXX_ALLNUM OFF Example 1111_ALLNUM OFF MANUAL ELDES ESIM110 V2 0 23 2 13 Event Log Deletion Event Log is a feature allowing to record information on system actions and messages into a log file The size of the log file is up to 1000 records Upon sending the following SMS the log file is cleared up and all recorded events are erased Delete Event Log SMS text g XXXX_DELETELOG Example 1111_DELETELOG NOTE Log feature must be enabled using ELDES Configuration Tool or remotely by connecting to the system over GPRS Otherwise this SMS command will have no affect 2 14 System Restart order to fully restart the system remotely send the following SMS message Restart the System SMS text g XXXX_RESTART Example 1111_
19. isabled The PIN code can be disabled by inserting the SIM card into a mobile phone and following proper menu steps There must be no SMS messages stored in the memory In addition make sure that the additional services such as voice mail call forwarding report on mised busy calls are disabled on the SIM card For more details please contact your GSM operator ATTENTION The system is NOT compatible with pure 3G SIM cards Only 2G SIM cards and 3G SIM cards with 2G profile enabled are supported For more details please contact your GSM operator Connect the circuit as shown in Fig No 2 Connect control connectors of the gate automatics device to the output contacts The systems which are already installed usually have a button for gate opening The output can be connected in parallel with the button s contacts or instead of it Connect a sensor or switch to inputs Z1 Z3 which turns on only when gates are lifted Low level signal is connected to Z1 and Z3 High level signal is connected to Z2 Input connection is an additional feature which is not mandatory to install The system will start up in less than a minute LED2 indicator should be blinking or constantly ON indicating a GSM network signal level ats To increase system reliability it is recommended not to use prepaid SIM cards The system would fail to send any messa ges or ring upon depletion of balance It is highly recommended to choose the same GSM cellular provider
20. ntrol in the parking lot of residential houses or offices Controlling gates of private houses Electronic appliance control for a specified period E g turn on off aquarium lighting pump watering heating etc Turn on computer system Turn on off any electric appliance Frozen system reboot e g computer network server Notification about a fault in gate or other automatics 1 2 Operation Description ESIM110 system is used to open gates lift road barriers or turn on off electronic devices remotely via the GSM network When a call is made to the number of the SIM card inserted in ESIM110 it checks if the number of the caller is recorded in the memory If it is 1 of 5 administrator numbers or the number exists in the user database the system rejects the call and turns on the output for the preset period If the number is not recognised ESIM110 will not respond The GSM switch gate contoller can also operate automatically according to a scheduled time or by sending a text message from administrator s phone number By connecting the opened gate barrier sensor to one of the 3 inputs the administrators can receive SMS message about the gates that did not close during the set time period There are 3 ways of configuration SMS messages over USB cable or Internet device connect over GPRS 1 3 Technical Specifications Electrical mechanical and other specifications Supply voltage 10 24V 50Hz 200mA max 10 24
21. pdated to device memory by SMS messages software or web browser Those parameters will be accessible with profile name which you have to include then sending SMS message to activate GPRS connection Use one time GPRS parameters when you want to change only one or sev eral parameters from the standard GPRS settings and use it only for upcoming session 2 check Table 1 and examples 3 Download ESIM110 GPRS manual from www eldes It for detailed information 4 If session ends and you haven t made all the necessary configura tions you will have to start a new session and login to ELDES website with new username and password repeat all steps from no 3 3 3 3 Standard GPRS parameters Settings Parameters Default Mode Choose Server mode if you want to connect directly to the device inserted type client server client SIM card must have static IP address Choose Client mode if you want to connect through www eldes It website profile Codename profile The code name of the standard GPRS parameters Configurable only by Both software or using web interface ip IP or DNS address configeldes tt ELDES server parameter It is recommended not to change this default Client parameter port nasty 5555 ELDES server parameter It is recommended not to change this default Client parameter dns1 iPaddress 84 32 3 34 ELDES server parameter It is recommended not to change this default Client parameter dis
22. s SMS text B XXXX OSCHED1 1 ON 2 ON 3 O0N 4 ON_5 ON_6 ON_7 ON_8 0ON Example 1111_ OSCHED1_2 ON_3 0N_8 ON The user database allows to disable one or several schedulers by their number The scheduler sets a period of time according to which the output is turned on off Disable Scheduler s for Output For more details on how to set the schedulers please refer to chapter 2 6 Scheduler Settings SMS text g XXXX OSCHED1 1 0FF 2 0FF 3 0FF 4 0FF 5 OFF_6 0FF_7 0FF_8 0FF Example 1111_OSCHED1_4 OFF_6 OFF_7 OFF_8 OFF NOTE Several schedulers can be enabled and disabled for the output at once by sending one SMS message Example 1111_OSCHED1_1 ON_4 OFF_7 ON_8 OFF MANUAL ELDES ESIM110 V2 0 19 2 8 Input amp Output Status This feature allows to receive a report by SMS on the present input amp output status enabled Input amp Output Status disabled input amp output names and input delay value SMS text g XXXX_STATUS Example 1111_STATUS 2 9 Input Configuration Manufacturer default input names Z1 Zone Z2 Zone2 Z3 Zone3 The length of each input name can be up to 8 characters including space symbol Send the following SMS mes sage in order to set a new name SMS text g XXXX_Zx NewInputName Value x input number range 1 3 Example 1111_Z2 GatesOpened By default all system inputs are enabled In order
23. send SMS message with the following text 1111 conn ect profil XXXX_connect profilel Here profile1 is the default name of your standard GPRS parameters ESIM110 will connect to your computer and session will be activated for 20 by default settings minutes To use one time GPRS parameters for example send SMS message with the following text XXXX_connect timeout MM Here MM time duration in minutes In the example above ESIM110 will connect to your com puter and session will be activated for MM minutes The system generates and sends login details to your mobile telephone Upload http SIM_card_IP local_TCP_port webpage in your web browser and login with received username and password to the ESIM110 configurations webpage Here SIM_card_IP is the IP address of your SIM card local_TCP_port TCP port of your computer which is used to communicate with ESIM110 For example http 195 22 161 210 5000 Make configurations to the device update users database or and review the device activity summary To work properly using web configurations interface you should wait while webpages is fully downloaded to your web browser before doing othe actions Stop the session 26 In order to terminate the session before it expires send the SMS message XXXX_stop 1111 stop 1 Device will use standard or one time GPRS parameters to connect with a server Standard GPRS parameters can be u
24. ssscssscssscsssessssssssccsecceee MFUNGO sressssecccccercoscecaoatstsotete vases EE EE EE AAA NAS 4 1 2 Operation Description 1 3 Technical Specifications 1 4 Connector and LED Indicators Functionality 1 5 Connection Circuit NeSystemilnstallatio Meee ireann Eeen eree EAn EAAS ErE EEEN E 6 uuaa 2 System Pre operation Control amp Configuration 7 PE e e as UE e C E E E 8 2 2 SMS Password 2 3 Administrator Phone Numbers 2 4 Date amp Time Settings 2 5 User Database Management 2 6 Scheduler Settings 2 7 Output Configuration 2 8 Input amp Output Status 2 9 Input Configuration 2 10 Info SMS 2 11 Confirmation by Call upon Output Control Action 2 12 Control from any Phone Number 2 13 Event Log Deletion 2 14 System Restart SAD DENCIXcccccscrccrscrccsscrccescacerscccsscrcerscacesecscerscacesecrectscscese 2 3 1 Restoring Default Parameters 3 2 Eldes Configuration Tool software 3 3 Remote System Configuration via GPRS Connection 3 4 Technical Support This document describes GSM switch gate controller ESIM110 its operation and installation It is very important to read User Manual before start using the system 1 General Information 1 1 Function ESIM110 is a micro controller based relay device intended to control gate automatics road barriers or to remotely turn on off any electronic device over GSM network Examples of using the system Road barrier co
25. stored to de vice memory by SMS messages software or web browser Those parameters will be accessible with profile name which you have to include when sending SMS mes sage to activate GPRS connection Use one time GPRS parameters when you want to change only one or several parameters from the standard GPRS parameters and use it only for upcoming session 3 For more information download ESIM110 GPRS manual from www eldes It website 4 If session ends and you havent made all the necessary configurations you will have to start a new session and login to ELDES website with new username and password repeat all steps from no 2 3 3 2 How to connect directly to ESIM110 with your web browser ATTENTION you can proceed through these instructions only if the sim card inserted in the device will have static ip addess request your gsm operator if he can provide it Ensure the following conditions ESIM110 is with a SIM card placed in it Power supply is connected The default 4 digit password is changed to a new one and your mobile number is uploaded as administrator mobile number The device isn t connected to computer with USB cable Update standard GPRS parameters Activate Server mode by sending SMS message with the following text XXXX_setgprs type server Activate GPRS connection between ESIM110 and your computer You can indicate to use standard or one time GPRS parameters To use standard GPRS parameters
26. t SMS text g XXXX_INFO Example 1111_INFO MANUAL ELDES ESIM110 V2 0 21 Set Periodic The system periodically sends Info SMS to administrator user 1 at the set period of time By Info SMS default this period is at 11 00 AM daily period 1 time 11 In order to set the new period and time send the following SMS message SMS text z XXXX_INFO PP TT Value PP SMS sending period in days range 1 10 TT SMS sending period in hours range 0 23 Example 1111_INFO 2 15 Disable Periodic Info SMS In order to disable periodic Info SMS send the following SMS message SMS text g XXXX_INFO 0 0 Example 1111_INFO 0 0 2 11 Confirmation by Call upon Output Control Action By enabling this feature the system rings back to the user after he she performs an output Enable Call Back control action by phone call The ring duration depends on the GSM operator In case the user answers the phone call he she will be able to listen on the phone to what is happening around ESIM110 a microphone must be connected to ESIM110 The phone conversation lasts until the user hangs up the phone SMS text z XXXX_CALLBACK ON Example 1111_CALLBACK ON 22 Disable Call Back In order to disable Call Back feature send the following SMS message SMS text g XXXX_CALLBACK OFF Example 1111_CALLBACK OFF 2 12 Control from any P
27. th the essential requirements and other relevant provisions of Directive 1999 5 EC The declaration of conformity may be consulted at www eldes lt Limited Liability The buyer must agree that the system will re duce the risk of fire theft burglary or other dan gers but does not guarantee against such events ELDES UAB will not take any responsibility regarding personal property or revenue loss while using the system ELDES UAB responsibility according to local laws does not exceed value of the purchased sys tem ELDES UAB is not affiliated with GSM opera tors providing cellular services therefore is not res ponsible for the quality of cellular services Manufacturer Warranty The system carries a 24 month warranty by the manufacturer ELDES UAB Warranty period starts from the day the system has been purchased by the end user The warranty is valid only if the system has been used as inten ded following all guidelines listed in the manual and within specified operating conditions Receipt with purchase date must be kept as a proof The warranty is voided if the system has been exposed to mechanical impacts chemicals high humidity fluids corrosive and hazardous environ ment or other force majeure factors Content 1 The system ESIM110 2 ESIM110 user manual 3 GSM ANteNa cssssscssseecsessseecssssses aiaiai About User Manual CONTENT 1 General Information ccsccssc
28. to disable a particular input send the fol Disable Input lowing SMS message It is possible to disable the input by input number or by input name SMS text z XXXX_Zx OFF Or XXXX_InputName 0OFF Value x input number range 1 3 Example 1111_Z3 OFF In order to enable a particular input send the following SMS message It is possible to enable Enable Input the input by input number or by input name SMS text g XXXX_Zx ON Or XXXX_InputName ON Value x input number range 1 3 Example 1111_GatesOpened ON va pa Input Pulse The input is triggered only if pulse duration delay is longer than the set value By default this Duration Delay duration is 600 ms for each eoni 600 ES EE SMS text g XXXX_Tx TT Value x input number range 1 3 TT pulse duration in mili seconds range 100 42000000 Example 1111_GatesOpened ON NOTE The input delays can be set for several inputs at once by sending one SMS message Example 1111_T1 500_T3 2000 2 10 Info SMS Info SMS is a system status report that can be requested at any time It contains information on system date time GSM signal strength and user database memory status In addition Info SMS can be useful to check the system status online offline and for prepaid SIM card users in order to check whether the credit is sufficient for sending SMS messages no SMS reply system offline or out of credi
29. ttings and Parameters enter the corresponding commands from Table 1 For example sending SMS message 0001 connect timeout 25 you indicate to ESIM110 to start GRPS connection for 25 minutes session time To specify more than one parameter you have to separate settings and parameters with symbol for example sending SMS message 0001 connect type client timeout 25 you indicate to ESIM110 to work in Client mode for 25 minutes Example xxxx_setgprs apn internet user web psw web 3 4 Technical Support Indication Possible reason Indicator is off or not blinking no external power supply circuit not properly connected blown fuse no network signal Indicator blinking several times per second SIM card is not inserted PIN code hasn t been disabled Sim card not active System does not send any SMS messages SIM card account depleted incorrect SIM central number no network signal user number is not programmed in user list Received SMS message Incorrect Format incorrect syntax extra space symbol left in SMS message For product warranty repair service please contact your local retail store where this product was purchase If your problem could not be fixed by the self guide above please contact your distributor or ELDES technical support by email support eldes It More up to date information about your device and other products can be found at the
30. ust be approved by LST EN 60950 1 standard External power supply can be connected to AC mains only inside installation room with automatic 2 pole circuit breaker capable of disconnecting circuit in the event of short circuit or over current condition Open circuit breaker must have a gap between con nections of more than 3mm and the disconnection current 5A AC 230V 50 Hz DC 24V USB cable Fuse F1 model MINISMDCOS5OF 0 5A Blown fuse cannot be replaced by the user and the replacement fuses have to be exactly the same as indicated by the manufacturer The device is fully turned off by disconnecting 2 pole switch off device of the external power supply or any other linked device that the system ESIM110 is powered from If you use security class computer for setting the parameters it must be connected to earth The WEEE Waste Electrical and Electronic Equipment marking on this product or its documentation indicates that in the EU the product must not be disposed of together with household waste Copyright ELDES UAB 2011 All rights reserved It is strictly forbidden to copy and distribute information in this document or pass to a third party without an advanced written authorization from ELDES UAB ELDES UAB reserves the right to update or modify this document and or related products without a warning Hereby ELDES UAB declares that this GSM Switch Gate controller ESIM110 is in compliance wi
Download Pdf Manuals
Related Search
ESIM110 esm11000 esm11065 esm11090 esim120 esim 1010 esim 100 gb esm10010 esm10000 esim 10gb esm10038