Home

User Manual

1. ol This control appears only when navigating in the USA You should check ames whether you are allowed to use carpool lanes before enabling this road type Route Calculation Method types Option Description ________ Fast Gives the quickest possible route if you can travel at or near the speed limit on all roads Usually the best selection for fast and normal cars Short Gives a route that has the smallest total distance of all possible routes between the route points Usually practical for pedestrians cyclists or slow vehicles Economical Combines the benefits of Fast and Short Nav N Go iGO 8 calculates as if it were calculating the Fast route but it takes other roads to save petrol Easy Results in a route with fewer turns With this option you can make Nav N Go iGO 8 to take for example the motorway instead of series of smaller roads or streets T 4 5 4 Regional settings These settings allow you to adjust the application for your local language measurement units time and date and their formats as well as choose the voice guidance profile you prefer Tap gt eae Fd regional the following buttons Menu settings Button f Description Program Language This button displays the current written language of Nav N Go iGO 8 By tapping the button you can select a new one from the list of available languages The application will restart if you change this setting you are asked to confirm this Vo
2. 2 Get to the list of results e After entering a couple of numbers the ones that are a match appear in a list e Tap KA Done to open the list of results before it appears automatically 3 Pick the settlement from the list 4 Enter the street name Tap lt Street Name gt 2 Start entering the street name on the keyboard 3 Getto the list of results 39 5 e After entering a couple of characters the names that match the string appear in a list e Tap KA Done to open the list of results before it appears automatically 4 Pick the street from the list Enter the house number Jab lt House Number gt Enter the house number on the keyboard Tap KA Done to finish entering the address pa Navigate To 6 The map appears with the selected point in the middle Tap Set as Destination Simple mode or pe Advanced mode from the Cursor menu The route is then automatically calculated and you can start navigating 3 1 2 8 Tips on entering addresses quickly When you are entering the name of a settlement or a street Nav N Go GO 8 only displays those characters that appear in possible search results The other characters are greyed out When entering the settement name or the street name tap the KA Ao button after a couple of letters Nav N Go iGO 8 lists the items that contain the character set You can speed up finding an intersection e Search first for the street with a less common or less u
3. Zoom in out Rotate left right 3D map only Tilt up down 3D map only Zoom preset buttons 2D map only Tilt and zoom preset buttons 3D map only Return to GPS position button Smart Zoom button Changes how much of the map is displayed on the screen Nav N Go GO 8 uses high quality vector maps that let you see the map at various zoom levels always with optimised content lt always displays street names and other text with the same font size never upside down and you only see the streets and objects that you need Map scaling has different limits in 2D and in 3D map view modes Changes the horizontal view angle of the map in 3D mode When GPS position is available Nav N Go GO 8 always rotates the map so its top faces your direction of travel Track Up orientation You can turn away from Track Up with these buttons If GPS position is available and you have rotated the map the Q button appears Tap this button to re enable the automatic map rotation Gives you the following map perspectives in Nav N Go GO 8 e classic top down view 2D Action Button s Smart Zoom Returning to normal navigation back to the GPS position with automatic map rotation Zoom preset buttons available in Advanced mode only Tilt and zoom preset buttons available in Advanced mode only Map scale Fit to screen D 3D EA e perspective view 3D The value always sh
4. 4 5 11 Track Log settings You can set up an automatic Track Log saving and fine tune its settings Tap the following Je a Track Logs buttons Menu Settings Button Description Update Interval This is how often track points will be saved Position information is normally received once a second from the GPS If you do not need such a detailed log you can increase this number to save track log space Enable Auto saving When auto saving is enabled you do not need to turn track log saving on and off manually Nav N Go iGO 8 will automatically start recording the track log as soon as GPS position is available Track Log Database Size This figure shows how much memory is used by the automatically saved track logs Track Logs Max Size You can set the maximum database size for the automatically saved track logs When the limit is reached the oldest automatically saved track logs will be deleted Create NMEA SIRF Log Independently of the normal track log you can instruct Nav N Go iGO 8 to record the native GPS data received from the GPS device These logs are saved as separate text files on the memory card and they cannot be shown or replayed in Nav N Go iGO 8 83 5 Glossary 2D 3D GPS reception The GPS receiver uses satellite signals to calculate its your position and need at least four signals to give a three dimensional position including elevation Because the satellites are moving and because obj
5. Road Types Used for Route Planning To let the route fit your needs you can also set which road types are to be considered for or to be excluded from the route if possible Excluding a route is a preference lt does not necessarily mean total prohibition If your destination can only be accessed using some of the excluded road types they will be used but only as much as necessary In this case a warning icon will be shown on the Route Information screen and the part of the route not matching your preference will be displayed in a different colour on the map Route Calculation Method You can choose from different route types The routing method can also be chosen while creating the route when the be Routing Methods destination is selected tap in the Cursor menu Use Traffic Information When TMC messages are received this setting tells Nav N Go iGO 8 whether to use that information in route planning Recalculate to Avoid Traffic This setting determines how Nav N Go iGO 8 uses the received TMC information in route recalculation e Automatic When route recalculation becomes necessary based on the received TMC events Nav N Go iGO 8 recalculates the route automatically Manual When route recalculation becomes necessary based on the received TMC events Nav N Go iGO 8 notifies you but you can decide whether to recalculate the route or not Disabled TMC events are only taken account when the route is recalculated in an
6. The procedure is explained starting from the Navigation menu 33 na Address ey e ra a 1 Tap the following buttons Simple mode or Fna Fri Advanced mode 2 By default Nav N Go iGO 8 proposes the country state and settlement where you are If needed tap the button with the name of the country and select a different one from the list If you select a new country you also need to select the state or tap lt All states gt o to search for a settlement regardless of the state it is in 3 If you have not changed the country you still have the possibility to change the state Tap the button with the name of the state and select from the list 4 If needed change the settlement e To select the settlement from the list of recently used ones tap the button e To enter a new settlement 1 Tap the button with the name of the settlement or if you have changed lt City Name gt the country state tap 2 Start entering the settlement name on the keyboard Get to the list of search results e After entering a couple of characters the names that match the string appear in a list e Tap KA Done to open the list of results before it appears automatically 4 Pick the settlement from the list 5 Enter the street name lt Street Name gt ap Start entering the street name on the keyboard Get to the list of results e After entering a couple of characters the names that match the string appear
7. gt 4 e Si Find Findeot Advanced 1 Tap the following buttons Simple mode or mode 2 Select the area around which the POI should be searched gt e mes The POI will be searched around a given address e SS The map appears with the Cursor in the middle Modify the location of CA A the Cursor if necessary then tap The POI will be searched around the given location Around IS Pasirian The POI will be searched around the current GPS position Re Around DS The POI will be searched around the destination of the active route Along Route The POI will be searched not around a given point but by the size of the detour it means from the active route This can be useful if you search for a later stopover that causes only a minimal detour For example upcoming petrol stations or restaurants 3 You can narrow the search with the following e Select the POI group e g Accomodation and after that if needed select the POI subgroup e g Hotel or Motel e To find the POI by its name tap A ff search and use the keyboard to enter a part of the name List All in this G e Tolist all POIs in a given POI group tap minnie 41 4 optional When finally the list of results appear you can sort the list fa sort the list alphabetically available when you search around a single location SOrt the list by the distance from your current position in a El line
8. the country state tap Start entering the settlement name on the keyboard Get to the list of search results e After entering a couple of characters the names that match the string appear in a list e Tap KA Done to open the list of results before it appears automatically 4 Pick the settlement from the list 4 Enter the street name an lt Street Name gt 2 Start entering the street name on the keyboard 3 Getto the list of results e After entering a couple of characters the names that match the string appear in a list e Tap KA Done to open the list of results before it appears automatically 35 A Pick the street from the list 5 Enter the house number lt House Number gt Tap Enter the house number on the keyboard Tap KA Done to finish entering the address 6 A list appears with the matching addresses Tap the desired one pa Navigate To 7 The map appears with the selected point in the middle Tap Set as Destination Simple mode or i Advanced mode from the Cursor menu The route is then automatically calculated and you can start navigating 3 1 2 4 Entering an address without knowing the dictrict suburb Long roads can run across several districts or suburbs You may not know if a particular house number is in which of them In this case follow the instructions below The procedure is explained starting from the Navigation menu A Address Ra Qa e 1 Tap the f
9. Camera location then tap the following buttons Surser l Camera warning The warning for Road Safety Cameras can be turned on in Warning Settings Tap the Co eee Na Speed Camera Warning following buttons Menu settings When you approach a Road Safety Camera with the warning enabled the following happens e Visible Warning The type of the camera is displayed in the secondary Turn Preview field for example EZL e Audible Warning If there is no speed limit given for the camera or your speed is under the given speed limit single beeps warn you about the camera e f you exceed the speed limit of the camera the following also happens e Visible Warning A symbol with the speed limit appears in the corner of the map for example 40 e Audible Warning A special alert sound is played 2 5 10 1 Camera types There are different types of Road Safety Cameras Symbol Some speed cameras stand by the roadside looking in one direction measuring one or both directions of the traffic They measure your current speed For these speed cameras you can specify the controlled traffic direction and the speed limit Nav N Go iGO 8 warns you when you approach these speed cameras in the measured direction If your speed exceeds the speed limit near the speed camera Nav N Go iGO 8 plays a special warning sound Mobile Some speed cameras are operated from vehicles They do not always work and they are not
10. Go iGO 8 Table of contents 1 Warnings and Safety information sssssscscccsssssssssssscccccccccsssssssscccccscssssssssccsssssseess 7 2 Getting started with Nav N Go iGO 8 ococcssssssssscsccceccccocscsssssssssssscceeccesossssssssssssseeeee 8 2 4 Simple and Advanced MOdES a 10 22 PAV GTC DUEL OILS sistas A ai 11 2 3 DUILONS and other controls On the sereen a r EE 12 Zl Us me ke PPP E E EIE ETT 14 ZAS MS NE MAD E a a 14 241 Checking he details ota map OCA to aia adidas 15 24 A late the AA Persie ase aatt EE 15 2 4 3 Status information and hidden controls On the Map occccccccnnnnnnnnnnonnnnnnnnnnnnnnnononononananannnnnnnnnnnnnnnos 18 2 4 4 Using the Cursor the selected map lOCation ooccccccccccoooononononnnnnnnnnnnnnnnnnnononnnnonnnnnnnnnnnnnnnnnnnnos 21 LONN GOGO ICO CON E A tisk sae A abd E 22 A A II A II E ET 22 225 2 AP ooangavevena senses aedeuaeaesend osaegedaeamn canes sae E E 22 Zoi Current GUS POSULON and Lock on RODU noi iS 22 2 5 2 2 Returning to normal navigation e 23 DIr SCLCCICA toca non CHIS OT aiurria E A das 23 2 5 2 4 Original position in the Cursor MENU ea 24 2 5 Day me and ment colour SCHEMES urn ti 24 2A Colour Scheme MUNN dipolo 24 2 9 3 ROUE calculati n and recalculation enssresssss nrun aeai E ia rana ni a 24 UAA EIEE T E AE E a LN aN MD RTA oe AE E ROT EC E I E E E EO ES 25 ES TRACK EOS See a E E a a ecuebasan aacane 26 290 ROM AdE MONS AON annor Ea r ENEA lar AEEA O 26 De DP
11. POI group or Group subgroup 71 4 4 6 Manage Saved Search Criteria You can manage the list of search criteria previously saved to easily find frequently searched em _ Saved A Search Criteria POI types Tap the following buttons Menu Manas Button with the name of the Saved Tap to rename the saved query Search Criteria E o o o Deletes the selected item in the list ra Clear All Deletes the entire list Turns the page for additional list items Tap to save a new search criteria Similar to how lt Add new search gt you search for a POI select the search reference first then select the POI group or subgroup to search in 4 4 7 User Data Management You can manage the data you have saved Pins POIs Favourites History and Track logs SS E and the settings you have made in the program Tap the following buttons Menu Manage User Data Management Button Description Remove Pins Map locations can be marked with Pins using the T place Pin button in the Cursor menu Tap this button to remove all your Pins from the map Backup User Data All user data and the current settings will be saved on the inserted memory card There is always one backup file If you perform a backup later the previous backup will be overwritten with the new information Restore User Data All user data and settings will be overwritten with the information stored in the backup file Data and settin
12. User LIcence A Or Cemen Cssesecccssis css do eiscscs desescsdseeecedsdeussdesesvecseeccaesedeussevedseenesceasiesaets 86 1 Warnings and Safety information Nav N Go iGO 8 is a navigation system that helps you find your way to your destination with a connected GPS receiver Nav N Go iGO 8 does not transmit your GPS position others cannot track you It is important that you look at the display only when it is safe to do so If you are the driver of the vehicle we recommend that you operate Nav N Go iGO 8 before you start your journey Plan the route before your departure and stop if you need to change something in the route Nav N Go iGO 8 has a Safety Mode if you turn on Safety Mode you cannot change anything in Nav N Go iGO 8 while the vehicle is moving at a speed of 10 km h 6 mph or higher Unless only passengers operate Nav N Go iGO 8 we strongly encourage you to turn on Safety Mode You must obey the traffic signs and follow the road geometry If you deviate from the route that Nav N Go iGO 8 recommended Nav N Go iGO 8 changes the instructions accordingly Never place mobile devices where it obstructs the driver s view where it is in the deployment zone of an airbag or where it might cause injuries in an accident For more information consult the End User Licence Agreement page 86 2 Getting started with Nav N Go iGO 8 Nav N Go iGO 8 is optimised for in car use You can use it easily by tapping the screen buttons and the map
13. do not need to pause the active route when you start driving again Nav N Go iGO 8 restarts the voice instructions from your position 3 9 Deleting the next via point from the route The easiest way to delete the upcoming route point the next via point in both Simple mode and Advanced mode is to open the Route BE fj by tapping the Turn Preview 61 field Mu on the Map screen and then coo HO E ar In Advanced mode you have another option Tap the following buttons Menu Route Gp Route Info Hga Skip Next via Next Via 46 3 10 Deleting the active route The easiest way to delete the active route in both Simple mode and Advanced mode is to open the Route Information screen by tapping the Turn Preview field Delete Route _ gt screen and then cooing ll Ea In Advanced mode you have another option Tap the following buttons Menu Route i Delete Route E Note If via points exist in the active route you cannot delete the route immediately uo fl Skip Next Via on the Route Information screen Tap repeatedly until all via points disappear and the a button appears Tap it to cancel the whole route 3 11 Using Track Logs Nav N Go iGO 8 can record the track how your GPS position changed that you drive Tip You do not need to select a destination and create a route for this you can also record your driving path while cruising This feature is available in Advanced mod
14. expanding the route is to keep the destination and to add via points intermediate destinations This feature is available in Advanced mode only 1 Select a new location as you did in the previous sections This will be the additional destination in the route The map appears with the selected point in the middle and the Cursor menu opens automatically 43 5 Insert as Via 3 Tap to add the point as an intermediate destination preceding the final destination of the route 4 optional To add more points to the route repeat the above steps as many times as you like If you insert a via point in a route that is already a multi point route you will automatically be taken to the Edit Route screen where you can determine the position of the intermediate route point When you enter the screen the new via point is placed as the last via point before the final destination The new point is the selected point in the list You have the following options The selected point moves up in the list becomes a via point to be reached earlier Tap this button repeatedly and the point becomes the start point of the route The selected point moves down in the list becomes a via point to be reached later Tap this button repeatedly and the point becomes the final destination of the route The route is reversed The start point becomes the destination the destination becomes the start point and all via points are to be reached
15. have changed lt City Name gt the country state tap Start entering the settlement name on the keyboard Get to the list of search results 32 e After entering a couple of characters the names that match the string appear in a list e Tap fA Done to open the list of results before it appears automatically 4 Pick the settlement from the list 4 Enter the street name i Ta lt Street Name gt 2 Start entering the street name on the keyboard Get to the list of results e After entering a couple of characters the names that match the string appear in a list e Tap KA Done to open the list of results before it appears automatically 4 Pick the street from the list 5 Enter the house number lt House Number gt Tap 2 Enter the house number on the keyboard 3 Tap KA Done to finish entering the address pa Navigate To 6 The map appears with the selected point in the middle Tap Set as Destination Simple mode or pe Advanced mode from the Cursor menu The route is then automatically calculated and you can start navigating 3 1 2 2 Entering an address North America Australia In some countries the state is also used in addresses If you are in one of these countries or choose any of them from the list of countries five lines appear on the screen Find Address Beste In California Encinitas lt Street Name gt reet Name gt E Mee gt i lt House Mumber gt
16. in a list e Tap KA Done to open the list of results before it appears automatically 4 Pick the street from the list 6 Enter the house number i lt House Number gt Enter the house number on the keyboard Tap KA Done to finish entering the address 34 pa Navigate To 7 The map appears with the selected point in the middle Tap pa Set as Destination Simple mode or Advanced mode from the Cursor menu The route is then automatically calculated and you can start navigating 3 1 2 3 Entering an address if house numbering is restarted There are long roads where the house numbering is restarted at some point This way the Same house number can appear twice or even more times on the same road If this is the case after giving the house number you need to select the appropriate address by the district suburb information The procedure is explained starting from the Navigation menu n Address y thes y 1 Tap the following buttons Simple mode or fna Fruits Advanced mode 2 By default Nav N Go GO 8 proposes the country state and settlement where you are If needed tap the button with the name of the country state and select a different one from the list 3 If needed change the settlement e To select the settlement from the list of recently used ones tap the button e To enter a new settlement 1 Tap the button with the name of the settlement or if you have changed lt City Name gt
17. influenced by TMC information When you later use the route it appears as it was saved but if it needs to be recalculated the current TMC information will be used in the new route e f you updated your map since you first saved the route Nav N Go iGO 8 recognises the change and recalculates the driving instructions according to the latest available map information e Nav N Go iGO 8 deletes from the route the via points that you already left behind during navigation together with the road segments used to reach it To avoid this if you want to save the route you need to save it before you start navigating 3 13 Loading a saved route This feature is available in Advanced mode only The procedure is explained starting from the Map screen 48 M A cx Route Tap the following buttons Menu Route Tap the route you wish to navigate In the very likely case when the start position of the saved route is different from the current GPS position you need to confirm whether you want to stop navigating from the current GPS position to use the start point of the loaded route e If you choose this option the automatic off route recalculation will be disabled e f you choose to keep the current GPS position as the start point the route will be recalculated starting from your current position The map appears and you can start navigating 49 4 Reference book Advanced mode On the following pages you will find the descri
18. off route situation Vehicle types e Car e Taxi e Bus e Emergency vehicles e Bicycle e Pedestrian 76 Road Types Used for Route Planning Type Description Motorways You might need to avoid motorways when you are driving a slow car or you are towing another vehicle Unpaved Nav N Go iGO 8 excludes unpaved roads by default unpaved roads can be in roads a bad condition and usually you cannot reach the speed limit on them Toll roads By default Nav N Go iGO 8 includes toll roads pay roads where there is a per use charge in the routes If you disable toll roads Nav N Go iGO 8 plans the best toll free route sh Charge roads are pay roads where you can purchase a pass or vignette to use ae the road for a longer period of time They can be enabled or disabled separately from toll roads Permit needed You might need a permit or permission from the owners to use certain roads or to enter certain areas Nav N Go iGO 8 excludes these roads from the route calculation by default pellies Nav N Go iGO 8 includes ferries in a planned route by default However a map does not necessarily contain information about the accessibility of temporary ferries You might also need to pay a fare on ferries Cross border In some cases the route calculated according to your other navigation and planning route preferences would lead through another country If you wish to always stay within the same country turn this option off
19. previous one and opens a new screen where you can edit the details of the camera Vv Add to Favourites The location of the Cursor is added to the list of frequently visited destinations the so called Favourites You can give a name for the Favourite 4 1 5 Position menu When you follow the recommended route on the map the Cursor is the current GPS position the Position menu replaces the Cursor menu It does not contain buttons that modify the current route as the GPS position is not useful as a route point A To open the Position menu tap Position 4 1 6 Route Information screen The Route Information screen has all the data and some of the functions you need while you navigate There are two ways to open this screen 85 n e ltcan be opened directly from the Map screen by tapping the Turn Preview field y In Advanced mode from the Navigation menu tap the following buttons Route T Route Info 60 Route Information total 6107 MI ia Destination Temet utca Route Information total 102km 8 50 iM j E a Unnamed road 135km Economical Plan on Map Skip Nert Via In the top section of the screen you see information about the current route The fields on this screen are continuously updated while you keep the screen open When you open the screen all fields contain information about reaching your final destination Tap any of the fields to see data on the via points start
20. set to check a preset speed limit The warning is similar to fixed speed cameras but as there is no speed limit given only the proximity is announced Built in Some speed cameras are built into traffic lights They work like fixed speed cameras but they are difficult to spot The warning for proximity and speeding is the same as for the fixed speed cameras gi O eau These speed cameras work in pairs and do not measure your current conto speed but your average speed between the two speed cameras Both 28 Symbol identify your car and record the exact time you pass them They use the difference between the two points in time to calculate your average speed Nav N Go iGO 8 warns you when you approach one of these speed cameras but as you pass by the warning stays on and your average speed is measured until you reach another speed camera of this type If your average speed exceeds the speed limit between the two speed cameras you receive the same special warning sound as with the other speed camera types In the rare case Nav N Go iGO 8 cannot register the moment you pass the second speed camera for example it is placed at the exit of a tunnel where GPS position is not yet available the warning continues Just tap the speed camera symbol displayed on the screen to stop the warning These cameras check if you obey traffic lights The warning is similar to mobile speed cameras as there is no speed limit given only th
21. the Cursor with a radiating red dot to make it visible at all zoom levels even when it is in the background of a 3D map view When the Cursor is set tap 5 The Cursor menu appears and you can use the Cursor as one of the following e the start point of a route e avia point ina route e the destination of a route You can also search for POIs around the Cursor Or you can save the location of the Cursor as e aFavourite e aRoad Safety Camera e aPOl 23 e amap marker Pin 2 5 2 4 Original position in the Cursor menu When the Cursor menu is open a special icon shows the Cursor position the menu was opened with You can move and zoom the map and you can set the Cursor to a different place The usual Cursor O appears and the buttons of the Cursor menu initiate actions for this new location oR To return to the original Cursor position tap The map jumps back to the position with which the Cursor menu was opened and the icon appears again 2 5 3 Daytime and night colour schemes Nav N Go iGO 8 uses different colour schemes during the day and during the night e Daytime colours are similar to paper road maps e The night colour schemes use dark colours for large objects to keep the average brightness of the screen low Nav N Go iGO 8 offers different daytime and night colour schemes It can also switch automatically between the daytime and the night scheme based on the current time and GPS positio
22. with even better routes if Traffic Message Channel TMC information is available The TMC is a specific application of the FM Radio Data System RDS used for broadcasting real time traffic and weather information TMC is enabled by default in Nav N Go iGO 8 EY Note TMC is not a global service It may not be available in your country or region Ask your local dealer for coverage details If public TMC data is broadcast at your location Nav N Go iGO 8 automatically takes into account the TMC data received You do not need to set anything in the program The receiver will automatically search the FM radio stations for TMC data and the decoded information will immediately be used in route planning The moment Nav N Go iGO 8 receives traffic information that may affect your route the program will warn you that it is recalculating the route and navigation will continue with a new route that is optimal considering the most up to date traffic conditions If necessary you can change the settings related to TMC or select a specific radio station to receive Tap the following buttons Menu Settings 30 3 Navigating with Nav N Go iGO 8 You can set up your route in Nav N Go iGO 8 in several ways if you need a simple route a route with only one destination without any intermediate via points you can select the destination and start navigating to it right away you can plan a multi point route available in Advanced mode o
23. with your fingertips Nav N Go iGO 8 can plan routes throughout the whole installed map set you do not need to change maps or switch to a poorly detailed general map to navigate between map segments or countries Tasks Instructions Using the retractable You do not need a stylus to use Nav N Go iGO 8 Tap the buttons and stylus the map with your fingertips Double tapping the You do not need to tap the screen twice for any action With buttons screen and controls a single tap is enough Tapping and holding the screen Gestures drag amp drop You do not need this to access the basic navigation functions Tap and keep pressing the following buttons to reach extra functions EL Tap and hold da on the Map screen you can set the minimum and maximum zoom level of Smart Zoom rs Er Tap and hold any of the FA buttons on the Map screen you can set or reset the zoom value of the button 2D map es a Pe ES oe Tap and hold any of the buttons on the Map screen you can set or reset the tilt and zoom values of the button 3D map Tap and hold KM on list and menu screens the Navigation menu appears t 4 Tap and hold any of the E buttons on the Map screen you can rotate tilt or scale the map continuously Tap and hold on keyboard screens you can delete several characters quickly Tap and hold or in long lists you can turn the page continuously Tap and hold the but
24. Bluetooth 4 1 9 GPS data screen m 4 al E ICO Tap the following buttons soma Fl to open the GPS Data screen and to see the status of the GPS reception 65 GPS Data GPS Data High 131 m A gt 94 34 81 km h nse 14 37 11 Elevation Accuracy 1948 Al g Settings Help GPS position quality indicator Nav N Go iGO 8 has a connection to the GPS receiver and GPS position information is available in 3D Nav N Go iGO 8 can calculate both your horizontal and vertical GPS position Yellow Nav N Go iGO 8 has a connection to the GPS receiver and GPS position information is available in 2D only the horizontal position is calculated Nav N Go iGO 8 cannot calculate your vertical GPS position Grey Nav N Go iGO 8has a connection to the GPS receiver but GPS position information is not available Nav N Go iGO 8 has no connection to the GPS receiver Green blinking GPS Nav N Go iGO 8 is connected connection to the GPS receiver quality Yellow blinking indicator Nav N Go iGO 8 has no connection to the GPS receiver but it is still trying to establish a connection Red blinking Nav N Go iGO 8 has no connection to the GPS receiver and does not try to establish a connection Sky view circle The virtual sky shows the visible part of the sky above you with your position as the centre The satellites are shown at their current positions The GPS receives da
25. C receiver and the application Baud Rate The communication speed used between the TMC receiver and the application Autodetect Tap this button and let Nav N Go iGO 8 find and connect the TMC receiver With a TMC receiver already connected the content of the screen is different Button Description _ _ _ Use Auto tuner If Auto tuner is turned on the tuner of Nav N Go iGO 8 sweeps through the FM CCIR radio band searching for a TMC signal The first station with TMC data will be used automatically When no TMC signal is available the tuner keeps on searching Turn off Auto tuner to select a radio station manually 4 gt When Auto tuner is turned off search for the desired radio i station manually with these buttons Exclude This Station Push this button to put the currently received FM radio station on an exception list and make Nav N Go iGO 8 search for another station instead Show Excluded Stations This button opens the list of radio stations previously excluded 81 Button Description You can re enable any or all of the excluded stations 4 5 9 Menu settings You can modify the look and behaviour of the Menu screens Tap the following buttons EY e Menu Settings Menu Button Description Animation You can activate and deactivate the Menu animations When animation is turned on buttons on Menu and keyboard screens appear in an animated way Background You can choose the
26. DO OCIO tates dll idol ca 56 FALL ELEMENTS OF VECINO TOMA A a baa aA da 57 2 SNA A ene ON rm eee ee erent rer neeT ar 58 A ACUSE UA A ons swear IAE 58 4 SN Posion A ace crests ia aiee E ane c esha peteratde ent E calcd ast Dawaunied E E 60 4 1 6 Route Information Eres 60 A oa A baer aust iadiuon edad oan laud baaent Gudea ancmwnleens 62 BD TL TT COMPUESTOS ARAS AAA ARAS AAA ARA ea Sagas it 64 ANS QUE Mi a 64 A LS SC AUS CNG CIN AA O E E o_o o o O A E 65 IA E a EN Maes E ea an Sana sales an 67 ASIC OU LC METU sis seats ae RR 500s 67 ELA 1 DEERE aR E AC COTE Ee AC EREE He O eee OEE 68 4 4 1 Manage Saved INOULCS e O O sabhonveeaaaesanta lah dindeaada ean ee ae 69 4A IN O PP A a 69 443 Manase Track LOS A A ie 69 AAA WMA A lo e 70 AA Ma as POS ad dad 70 4 4 6 Manage Saved Search Crta ld dd ins 72 A ALT ASCP Data Mana enie inning oia iia 72 Bh uN CENT OS IN A sea aa se tateas So Ssea aap aanlshes nt GAilasad nomen E ans neas nian onthe te sean hi eaes 73 An A 74 Be Die SOUP SCE AA A A A E aus tales teat a Medals atts ere aes 75 A Is A A R T NAE R NO 75 AA REO EUCLID SS ai n a a A 78 A DNV IS ATION SCLIN GS acters ies bach a a 79 Ao GANN a OS Sel COS ea e E a 79 LTGP SESE A EErEE r EE E E SENE 80 A IV CSC LUNG aa a e RO E E wasonasiarsepedueas wmauieieeatta 81 A VIC UB CIN OS an eaten asada a E ce seams vaua ma ee onnmsusad A 82 AS LO Device SEU A In o A A sued ouueenes deaisiies 82 Aa Y A rek AA o Uo O O A 83 TO 84 6 Pd
27. MC page 81 receiver If the TMC receiver is working you can select the radio station to be received You can modify the look and behaviour of the page 82 Menu screens 73 Button Description Reference You can change some device settings to control the screen backlight when Nav N Go iGO 8 is running You can set up an automatic Track Log saving P298 83 and fine tune its settings This screen has no navigation feature merely provides information about the bolo and licenses included with your navigation system Ef spie node You can switch to Simple mode In Simple mode only a few of the above settings are available The rest of the settings are set to values that are optimal for typical use 4 5 1 Map Screen settings You can fine tune the appearance and content of the Map screen Tap the following buttons CH n ga Map Screen Menu Button Description S 3D Settings Use 3D settings to determine which of the present 3D objects are shown on the map and adjust the level of 3D visual detail The options are as follows e Landmarks Landmarks are 3D artistic or block representations of prominent or well known objects 3D landmarks are only available in selected cities and countries Elevated Roads Complex intersections and vertically isolated roads such as overpasses or underground tunnels are displayed in 3D Building Visibility Full 3D city building data that represents actual buildin
28. OI that comes with the map shows the symbol of the POI category If you save your own POI you can select an icon for it independently of the POI category you have put it in Saving POI To save a POI place the Cursor O at the desired location then tap the following E More Options y Save as POI buttons User Managing POI You can select which POI groups to show and which ones to hide on the map and from which zoom levels POI icons are visible At the same place you can manage your saved POls A saved POI can be renamed moved to a different POI group its icon can be changed or a phone number and additional information can be added to it Tap the following buttons A e POI Menu Manage 2 5 10 Road Safety Cameras The location of a Road Safety Camera is a special POI They cannot be searched like other POls and there is a special proximity warning only for cameras Is the device shipped with a built in database of Road Safety Cameras Can you upload Road Safety Camera locations from POI Warner Yes Can Road Safety Camera locations be uploaded in a text file Yes Can you save the Cursor as the location of a Road Safety Camera 27 You can use the POI Warner update tool that is on the enclosed DVD The first update of fixed Road Safety Cameras is free of charge Saving Road Safety Cameras To save the location of a Road Safety Camera place the Cursor O at the desired P More Options fjh Save as
29. POL CP OMUS OF teresa ined houses data 21 PILORO Sily Came SrA E 27 2 5 10 1 Camera types A 28 23D LVL CANET ANECON S A A TEE E OE E TOO TEE 29 Zo Sa ia ri E 1 O E E E S 29 ZIAL TMC ratio Message Channie aroraa a O E E datatcatadashoasut ateveseanaamensaats 30 3 Navigating with Nav N G0 IGO 8 sisiesacisedenceiensdvessisdisssnsatesandindececbecedscncssdeadcusensnctanssueens 31 Jul Selecnne INC GESTNGMON of a TOUS AAA AA TE O 31 Sell Selectine the Cursor as Me destina oN esr ue ese N d 31 SZ Emern o an address OF Pall Ord AGOLeSs ardid 32 3 1 2 1 Entering an address Emp ea 32 3 1 2 2 Entering an address North America Australia ani 33 3 1 2 3 Entering an address if house numbering is VESTATCE cccccccccc cece cece aaa aaa aaa aaa eee 35 3 1 2 4 Entering an address without knowing the Cictrict SUuBurd 0 ccccccccccc cece eee aaa aaa 36 HAL SCLCCIIN GCI ANICTSECHLOI GS TMC OESO OM mili A AA 37 31 2 OsSCleClin GCI CENIVE GS tod ESO SA Ran RWIS SE AS 38 J127 ENTE re GN GGAICSS wilh POSTOU CORE arane oe A AOO a ba toad whi 39 SzG TIPS ON ENTENDES SES UCI DA A AAA A 40 3 1 3 Selecting the destination from your Favourites oooooooonnnncncnnnnnnnnnnnnnnononnnnnnnonnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnns 40 3 1 4 Selecting the destination from the POL visti vacacotivicsdenaressvubea is 41 3 1 5 Selecting the destination with a saved POI search Criterla ooooooooooooooncnnnnnnnnnnnnnnnnnnnnnnnonananannnnnnss 42 316 Selectinsstie destination
30. S position quality e Battery status e Vehicle type used for route calculation e Sound status muted or enabled e Track log recording status e TMC reception and processing status e Bluetooth connection and communication status 4 1 1 1 Battery GPS position quality and Vehicle type indicator This is a complex indicator and a button that opens the Quick menu The battery part shows information about the rechargeable battery of the device Ll leon Description The battery is charging The device runs on external power ST ll The battery is not charging but it is full 53 Sr The battery is not full but it still has enough capacity Nav N Go iGO 8 has no connection to the GPS receiver GPS navigation is not possible Devices with a built in GPS receiver are permanently connected On such devices the icon does not appear in normal circumstances Nav N Go iGO 8 is connected to the GPS receiver but the signal is too weak and the receiver cannot determine the GPS position GPS navigation is not possible Only a few satellites are received Position information is available but elevation altitude cannot be calculated GPS navigation is possible but the position error may be significant Altitude information is available the position is a 3D position GPS navigation is possible Taxi 4 1 1 2 Status indicator strip This is a complex indicator In one strip it indicates the following status informatio
31. User Manual Nav N Go iGO 8 Navigation software for PND devices UK March 2008 ver 1 4 Copyright note The product and the information contained herein is subject to change without prior notification This manual may not in whole or in part be reproduced or transmitted in any form either electronically or mechanically including photocopying and recording without the express written consent of Nav N Go Kft 2008 Nav N Go Kft Whereis map data is 2006 Telstra Corporation Limited and its licensors Data Source 2006 Tele Atlas N V Austria BEV GZ 1368 2003 Denmark DAV France IGN France Great Britain Ordnance Survey data with permission of Her Majesty s Stationery Office Crown Copyright ltaly Geonext DeAgostini Northern Ordnance Survey of Northern Ireland Ireland Norway Norwegian Mapping Authority Public Roads Administration Mapsolutions Switzerland Swisstopo The Netherlands Topografische ondergrond Copyright O dienst voor het kadaster en de openbare registers Apeldorn All rights reserved Thank you for choosing Nav N Go iGO 8 as your door to door in car navigator Read the Quick Start Guide first and start using Nav N Go iGO 8 right away This document is the detailed description of the software You can easily discover Nav N Go iGO 8 while you are using it however we still recommend that you read this manual to understand the screens and the features of Nav N
32. a to quickly receive the list of nearest matching POIs and instantly plan a new route to the desired one or insert it as a via point in your active route e In Advanced mode more buttons appear at the bottom PUT Avoid a If you want to bypass a part of the route starting from the next intersection tap this button and select a distance to bypass rae Delete Avoids If you have used the above function before tap this button to clear the restrictions from the map 4 1 4 Cursor menu As soon as you select one point in the Find menu the map appears with the Cursor menu a menu with possible actions for the selected point 58 Alternatively when you tap the map control buttons appear Tap again to place the Cursor a radiating red dot Now tap SS and the Cursor menu opens with a list of options In order to show a part of the map with the Cursor menu it contains only a few buttons first More Options to get all the options ap Button Description Ka Closes the Cursor menu and returns to the previous screen Yor With the Cursor menu open you can still move or scale the map and tap the map anywhere to place the Cursor to a new location but when you use this button the Cursor jumps back to the place where it was at the time when you opened the Cursor menu Displayed at the Cursor if it is at the same location with which the Cursor menu was opened Displayed at the Cursor i
33. always selected Nav N Go iGO 8 uses them when it switches from day to night and back Track up map orientation In Track up mode the map is rotated so its top always points in the currend driving direction This is the default orientation in 3D map view mode See also North up map orientation Road Safety Camera A special POI type for speed cameras and red light cameras Different data sources are available and you can also mark the position of a Road Safety Camera on the map You can configure Nav N Go iGO 8 to warn you when you approach one of these cameras 85 6 End User Licence Agreement 1 The contracting parties 1 1 Contracting parties to present Agreement are on the one hand Nav N Go Kft 23 Berc utca H 1016 Budapest Hungary Hungarian reg no 03 09 111944 as Licensor and the legal user as defined in Section 2 of the object of present Agreement according to Section 4 hereinafter referred to as User on the other hand hereinafter jointly referred to as Parties 2 Conclusion of the Agreement 2 1 The Parties hereby acknowledge that present Agreement shall be concluded by implicit conduct of the Parties without a signature of the Parties 2 2 The User hereby acknowledges that following the lawful acquisition of the software product constituting the object of present Agreement Section 4 any degree of use installation to a computer or other hardware installation of such hardware into a vehicle pressi
34. and when you view the map and use it to plot the route map in 3D when you navigate 4 1 2 3 Elements of the active route Nav N Go iGO 8 shows the route in the following way Symbol Name Description Current GPS position Your current position displayed on the map e In pedestrian mode it is the exact GPS position If a vehicle is selected for route calculation the arrow is put on the nearest road The location selected in the Find menu or a map Cursor selected map point selected by tapping the map location Start point The first point of the route Normally if GPS position is available it is the start point of the route If there is no valid GPS position Nav N Go iGO 8 uses the last known GPS position as the start point When you are using a saved route Nav N Go iGO 8 asks you if you want to use your GPS position or the first point in the saved route as the start point You can also modify the start point in the Cursor menu If you do so the automatic off route recalculation needs to be turned off to keep the selected point as the start point If the automatic off route recalculation is disabled for any of the above tapping the MM icon in the Turn Preview field not only initiates a route recalculation from the current GPS position but it will re enable the automatic off route recalculation as well Vi A via point is an intermediate destination You ia point i can place as many via poi
35. ap appears with the selected point in the middle Tap Hs Set as Destination Simple mode or Advanced mode from the Cursor menu The route is then automatically calculated and you can start navigating 3 1 2 5 Selecting an intersection as the destination The procedure is explained starting from the Navigation menu Aart Address y th eas 1 Tap the following buttons Simple mode or fnd Fs Advanced mode 2 By default Nav N Go GO 8 proposes the country state and settlement where you are If needed tap the button with the name of the country state and select a different one from the list 3 If needed change the settlement AL e To select the settlement from the list of recently used ones tap the button To enter a new settlement 1 Tap the button with the name of the settlement or if you have changed lt City Name gt the country state tap 2 Start entering the settlement name on the keyboard 3 Getto the list of search results e After entering a couple of characters the names that match the string appear in a list 3 e Tap KA Done to open the list of results before it appears automatically 4 Pick the settlement from the list A Enter the street name lt Street Name gt Tap 2 Start entering the street name on the keyboard Get to the list of results e After entering a couple of characters the names that match the string appear in a list e Tap KA Done to op
36. ap the map additional buttons and controls appear for a few seconds right screenshot Most parts of the screen behave as buttons Symbol Name Action Turn Preview that is the next Opens the Route Information route event Second upcoming route event Opens the Itinerary Trip data Opens the Trip Information screen Battery status Opens the Quick menu GPS position quality Opens the Quick menu Vehicle used in toute Opens the Quick menu calculation Bottom row Current street and house n a numbers on left and right Map view modes Switches between 2D and 3D map modes Detour Opens the Detour screen two ways of modifying the route e the list of Saved Search Criteria a button to avoid parts of the route 91 Symbol Name Action Position 92 Position menu appears when navigating a route Cursor menu appears when there is no GPS position or the Cursor is not at the current GPS position Open Close Map control buttons Rotate left rotate right Tilt up tilt down Zoom in zoom out Return to GPS position appears when GPS position is available and you have moved the map Enable Smart Zoom replaces the previous button if there is no GPS position or the map has not been moved Zoom preset buttons available in Advanced mode only Opens the Position menu Opens the Cursor menu Tap this button to show or hide the following map control buttons Zoom in out R
37. ation Menu Tap one att the pa ns below ET to select your destination Find Address History gt POI S Favourites Settings Manage The typical way of using Nav N Go iGO 8 is to select a destination and start navigating You can select your destination in the following ways not all of them are available in Simple mode e Use the selected location on the map the Cursor page 31 Enter a full address or a part of an address for example a street name without a house number or the names of two intersecting streets page 32 e Enter an address with postal code page 39 This way you do not need to select the name of the settlement and the search for street names might be faster as well e Use a coordinate page 43 e Use a saved location e aFavourite page 40 e aPOl page 41 e the History of previously set destinations and waypoints page 42 2 1 Simple and Advanced modes The two operating modes of Nav N Go iGO 8 mainly differ in the menu structure and the number of available features The controls and screen layouts are the same e Simple mode you have easy access to the most important navigation functions and the basic settings only The rest of the settings are set to values that are optimal for typical use e Advanced mode you have access to the full functionality of Nav N Go iGO 8 In portrait screen orientation To switch from Simple mode to Advanced mode on the startup screen Navigation Me
38. available when you search around a single location Order by Distance fea sort the list by the distance to drive on route from your current position available when you search along the active route DE sort the list by the size of the needed detour available when you search along the active route 5 Tap the desired POI in the list pa Navigate To 6 The map appears with the selected point in the middle Tap pa Set as Destination Simple mode or Advanced mode from the Cursor menu The route is then automatically calculated and you can start navigating 3 1 5 Selecting the destination with a saved POI search criteria POI search criteria can be saved in the POI section of the Manage menu but Nav N Go iGO 8 is already shipped with some saved criteria you can use instantly when searching for a POI The procedure is explained starting from the Navigation menu uy z Find POI 5 viy Si Find Find POL Advanced Simple mode or 1 Tap the following buttons mode e Saved 2 Tap Mas Search Criteria Select one of the saved criteria and the list of matching POIs appear Tap the desired POI in the list pa Navigate To 5 The map appears with the selected point in the middle Tap Set as Destination Simple mode or i Advanced mode from the Cursor menu The route is then automatically calculated and you can start navigating 3 1 6 Selecting the destination from the History The destinat
39. be shown on the map Renaming or deleting Favourites page 0 Creating updating or deleting POIs Creating updating or deleting POI groups Modifying POI visibility settings Creating renaming or deleting Saved Search Criteria page 2 68 4 4 1 Manage Saved Routes A el You can manage the previously saved routes Tap the following buttons Menu Manage rile Saved Routes Button Description Button with the name of the saved route Opens the selected route for editing Deletes the selected route Clears the list of saved routes Turns the page for additional list items 4 4 2 Manage History A You can manage the list of locations you used lately Tap the following buttons Menu Manaa History Description E Deletes the selected item in the History na Clear History Deletes the entire History al Turns the page for additional list items 4 4 3 Manage Track Logs You can record Track Logs then play them back display them on the map and see their mm Track Logs details Tap the following buttons Menu Manage J ___ Button Description 2 Starts recording the track that you drive You can also start Record recording a track log in the Quick menu Stop Stops the ongoing Track Log recording You can also stop the Recording track log recording in the Quick menu Button with the name of the Shows the details of the selected Track Log track log Starts a simulated
40. btain the desired time Compare GPS and device The current time of the GPS receiver and the device clock are times displayed Please note that the GPS clock is only available with GPS reception This allows you to check whether any correction is needed 78 4 5 5 Navigation settings You can control how Nav N Go iGO 8 behaves during navigation Tap the following buttons EY ake LE Navigation Menu E settings nai Button Description Keep Position on Road This feature allows car drivers to always correct GPS position errors by matching the vehicle position to the road network For pedestrian navigation this feature is automatically disabled to let the software show your exact position By turning off this feature you also turn off the GPS position error filtering The position shown on the map will be subject to all position errors and position fluctuations Off route Recalculation This switch tells Nav N Go iGO 8 whether to automatically recalculate the route when you deviate from it If this feature is turned off you need to initiate route recalculation manually otherwise navigation will be stopped until you return to the originally recommended route Setting another point than the current GPS position as the start point of the active route will automatically disable this feature restore Lock to Fosition If you have moved or rotated the map during navigation this feature moves the map back to your current GPS posi
41. card in GPX format and deleted See page 69 Independently of the normal track log you can instruct Nav N Go iGO 8 to record the native GPS data received from the GPS device These logs are saved as separate text files on the memory card and they cannot be shown or replayed in Nav N Go iGO 8 J6 Track Logs To turn on NMEA SIRF log saving tap the following buttons Menu settings l Create NMEA SIRF Log 2 5 8 Route demonstration A simulation drives you through the route following the driving instructions page 45 You can choose from a simulation at high speed or at normal driving speed 26 You can use it for example to see which bridge Nav N Go iGO 8 planned for the route if you do not want to take that bridge you can avoid it Route demonstrations can be started from the Route menu by tapping the Ji Fly Over B high speed simulation or the speed button simulation at normal 2 5 9 POI Points of Interest A point of interest POI is a location that someone might find useful or interesting Nav N Go iGO 8 is delivered with thousands of POIs and you can also create your own POls in the application POI locations are marked on the map with special icons POI icons are quite large so you can easily recognise the symbol The icons are also semi transparent they do not cover the streets and intersections behind them POls are grouped into several levels of categories and subcategories The icon of a P
42. e proximity is announced 2 5 10 2 Camera directions A speed camera can measure the speed of one direction of the traffic both directions or even several directions in an intersection when they are mounted on a rotating base The same directions apply to red light cameras Nav N Go GO 8 warns you only if you drive in a measured or possibly measured direction The measured direction of the camera appears with the following symbols Symbol Description i The camera checks the speed of the direction into which you are driving The camera checks the speed of the opposite driving direction O The camera checks the speed in both directions on the road ES The camera can check the speed in any direction 2 5 11 Speed limit warning Maps sometimes contain information about the speed limits of the road segments This information may not be available for your region ask your local dealer or may not be fully correct for all roads on the map You can configure Nav N Go iGO 8 to warn you if you exceed the current limit Tap the EY ne fi Warnings Warn When Speeding following buttons Menu Settings l When you exceed the speed limit the following happens e Visible Warning A symbol with the speed limit appears in the corner of the map for 50 example O 29 e Audible Warning A voice message is played using the selected voice guidance profile 2 5 12 TMC Traffic Message Channel Nav N Go iGO 8 can provide you
43. e data fields contain information about reaching your final o Next Via Point destination Tap and the fields concerning your route display data for the next via point Tap the button repeatedly to toggle between the two possibilities You have the following data and functions on this screen Name Description Function Shows whether the route data fields show information about the final destination checkered flag or about the next via point yellow flag Field next to the flag Shows the name or number of the current street or road Turn Preview Shows the type and distance of the next route event Compass Shows the current heading Tap this field to show it on the map screen in one of the Trip Data fields 62 Name Description Function Speedometer Distance Remaining Time Remaining Arrival Time Speed Limit Col oo Olen DES Shows the current speed both graphically and as a number Shows the distance you need to travel on the route before reaching your final destination Shows the time needed to reach the final destination of the route based on information available for the remaining segments of the route The calculation cannot take into account traffic jams and other possible delays Shows the estimated arrival time at the final destination of the route based on information available for the remaining segments of the route The calculation cannot take into account traffic jam
44. e following buttons Menu Route Button Description Reference T Route Info Opens a screen with useful route data page 60 E Itinerary You can browse the driving instructions that Nav N page 25 Go iGO 8 follows during navigation You can exclude manoeuvres or streets to adjust the route 67 Button Description Reference to your preferences gt Edit Route You can modify the route remove route points or page 45 change their order Delete Route Erase the active route with all its route points start page 47 point via points and destination If you later decide that you need the same route you will have to rebuild it from scratch You can save the active route for later use page 48 Foad Route You can load a previously saved route for page 48 navigation Aa Opens the Route settings screen with controls to page 75 modify the vehicle the road types used for route calculation or the route calculation method Fly Over You can run a demonstration of the route at high page 26 speed I simutate You can run a demonstration of the route at normal P298 1 speed 4 4 Manage menu You can manage the content that Nav N Go iGO 8 stores Tap the following buttons Menu 2 Manage l Description Renaming or deleting saved routes page 69 rile Saved Routes Deleting History items page 69 he History e Recording simulating renaming or deleting track logs page 69 la assigning colour to them to
45. e only The procedure is explained starting from the Map screen Recording the travelled path creating a Track Log 1 Start driving A 2 Tap the following buttons Menu Manase 3 Start the recording tap the button You return to the map and you can continue driving jF L Track Logs Sto 4 Repeat the above steps then tap E Recording later to stop the recording Nav N Go iGO 8 labels the Track Log with a time stamp As an alternative you can tap the o button in the Quick menu to start and later to stop the Track Log recording 47 Simulating a Track Log on the map A ps Track Logs 1 Tap the following buttons Menu Manage Z 2 Locate the desired Track Log and then tap the button next to it 3 The map returns and the Track Log simulation a life like replay begins 4 You can stop the replay any time by tapping the a button Changing the colour of a Track Log sapere 1 Tap the following buttons Menu Manage Track Logs 2 Tap the desired Track Log and then tap one of the colour buttons 3 12 Saving a route This feature is available in Advanced mode only The procedure is explained starting from the Map screen ie Save Route 1 Tap the following buttons Menu Route 2 Enter a name for the saved route and then tap KA Doe When you save a route Nav N Go iGO 8 not only saves the route points but the whole itinerary e The saved route might have been
46. ects can block the signals your GPS device might not receive four signals If three satellites are available the receiver can calculate the horizontal GPS position but the accuracy is lower and the GPS device does not give you elevation data only 2D reception is possible Active route The currently navigated route You can save and load routes in Nav N Go iGO 8 but only one route can be active at any given time and it is always active until you delete it reach your destination or you quit Nav N Go iGO 8 See also Route City Centre The City Centre is not the geometric centre of the settlement but an arbitrary point the map creators have chosen In towns and villages it is usually the most important intersection in larger cities it is an important intersection GPS accuracy Several factors have impact on the deviation between your real position and the one given by the GPS device For example signal delay in the ionosphere or reflecting objects near the GPS device have a different and varying impact on how accurately the GPS device can calculate your position Map Nav N Go iGO 8 works with digital maps which are not simply the computerised versions of traditional paper maps Similarly to the paper road maps the 2D mode of digital maps show you streets roads and elevation is also shown by colours In 3D mode you can see the altitude differences for example valleys and mountains elevated roads and in selected cities 3D land
47. ed POI for editing Only the POls you have 70 Button Icon Description address of a POI item created appear in this list Opens the selected POI group for editing Tap to filter the list to contain only the POls that you saved My POI E ES Tap to see all POls in the list Creates a new POI group at the given group level Turns the page for additional list items O rms POL group isnot shown onthe map 6 Tris POL group contains POIs that you saved When a POI group is open for editing Button Description ltems in the POI group will not be shown on the map The distance buttons set the zoom level from which the items Close Medium in the POI group will be shown on the map TEA Subgroups under the edited POI group will inherit its visibility Same Visibility in Subgroups settings Button with the icon of the Tap this button to select a new icon for the POI group POI group Deletes the edited POI group You are only allowed to remove Remove POI groups that you have created When a POI item is open for editing Button Description 2 Button with the name of the Tap this button to rename the POI POI Button with the icon of the Tap this button to select a new icon for the POI POI Tap this button to enter a telephone number for the POI o Tap this button to enter additional information for the POI Tap this button to delete the selected POI Delete Change Tap this button to move the POI to another
48. egal regulations or that of present Agreement 6 Rights of the User 6 1 The User is entitled to install the software product on one hardware device desktop handheld portable computer navigation device at a time and to run and use one copy thereof 6 2 The User is entitled to make one security copy of the software product However if the software product is operational after installation without the use of the original media copy then the original media copy is deemed to be a security copy In all other cases the User is only entitled to use the security copy if the original media copy of the software product has become unsuitable for proper and legal use without any doubt such state thereof being supported by acceptable proof 7 Limitations of use 7 1 The User is not entitled 7 1 1 to multiply the software product to make a copy thereof 7 1 2 to lease rent lend distribute transfer it to a third person with or without a consideration 7 1 3 to translate the software product including translation compilation to other programming languages 7 1 4 to decompile the software product 7 1 5 to modify extend transform the software product in whole or in part to separate it into parts compose it with other products install it in other products utilise it in other products not even with the aim of achieving a co operation with other products 7 1 6 apart from using the computer program to obtain informat
49. en the list of results before it appears automatically 4 Pick the street from the list el EEES 5 Tap the button If only a few intersecting streets exist their list appears immediately e Incase of a longer street a keyboard screen appears Start entering the name of the intersecting street on the keyboard As you type if the matching streets can be shown on one screen their list appears automatically 6 Tap the desired intersecting street in the list pa Navigate To 7 The map appears with the selected point in the middle Tap Set as Destination Simple mode or ia Advanced mode from the Cursor menu The route is then automatically calculated and you can start navigating 3 1 2 6 Selecting a city centre as the destination The City Centre is not the geometric centre of the settlement but an arbitrary point the map creators have chosen In towns and villages it is usually the most important intersection in larger cities it is an important intersection The procedure is explained starting from the Navigation menu Ad Address ey e 1 Tap the following buttons Simple mode or fmd fis Advanced mode 2 By default Nav N Go iGO 8 proposes the country state and settlement where you are If needed tap the button with the name of the country state and select a different one from the list 3 If needed change the settlement gt e To select the settlement from the list of recently used one
50. eration thereof with any other system device or product e g software or hardware 8 5 The Licensor shall hereby also draw the attention of the User with great emphasis to the fact that while utilising the software product in any form of transportation observing the traffic regulations and rules e g use of obligatory and or reasonable and suitable security measures proper and generally expected care and attention in the given situation and 87 special care and attention required due to utilising the software product is the exclusive responsibility of the User the Licensor shall not assume any responsibility for any damages occurred in relation to utilising the software product during transportation 8 6 By concluding present Agreement the User shall especially acknowledge the information stated in Section 8 above 9 Sanctions 9 1 The Licensor hereby informs the User that according to regulations of the CA should the Licensor find its rights to be breached the Licensor may 9 1 1 claim the acknowledgement of such breach by court 9 1 2 claim ceasing the breach and ordering the person under breach from continuing such 9 1 3 claim that the person under breach give proper compensation even by way of publicity to the expense of the person under breach 9 1 4 claim the return of the increase of assets due to the breach 9 1 5 claim ceasing the breaching situation the restitution of the state before the breach to the e
51. eyboard Keys layout for example from a Latin l Tap and select from the list of QWERTY keyboard to a Greek available keyboard types keyboard Nav N Go iGO 8 remembers your last keyboard choice and offers it the next time you need to enter data Remove the unneeded character s tap Correcting your entry on the keyboard Tap and hold the button to delete the entire input string Entering a space for example between a first name and a family Space name or in multi word street Tap names Entering small or capital letters all to cycle through entering lower case letters capital initials or all capitals Entering symbols fon to switch to a keyboard of symbol characters Finalising the keyboard entry 2 4 Using the map The map screen is the most frequently used screen of Nav N Go iGO 8 It can be accessed from the Navigation menu by tapping 14 Eiberg 130 Saint Margaret Street A302 E G a g f ir 1 A3212 860 m 3 59 44 imh ss Bridge Street _ For further information about the map screen see page 50 2 4 1 Checking the details of a map location e Ifyou are interested in the details of your current position during navigation 1 Check the bottom line of the map It shows the current street and house number information 2 For further details tap Pesition to open the Position menu 3 Tap 2 MECO The address the coordinate and the list
52. f it has been relocated since the Cursor menu was opened Opens a new screen with the address and coordinate of the Cursor and the list of nearby POls Opens the full screen Cursor menu with all the possible options More Options A new route is calculated with the Cursor as the destination The pa set as Destination previous route is deleted If the Cursor is at or near the destination this button replaces the previous one and deletes the current destination from the route The last via point is promoted as destination or if there are no via points the route is deleted The Cursor is added to the active route as an intermediate route point a point to be reached before the destination If there is already a via point in the route the Edit Route screen opens to let you decide where the new via point is to appear in the route If the Cursor is at or near one of the via points this button replaces the previous one and deletes the selected via point from the route The route is recalculated without the deleted point The Cursor is appended at the end of the route as the new destination The previous destination is demoted and becomes the last via point 1 pe Remove Destination 5 Insert as Via IW Remove Via be Continue pa Routing Methods He Set as Destination This button is similar to the button but a new screen opens and the route is calculated with all the possible route calculation methods Fast S
53. g size and position on the map Building data is limited to the city centre of major cities in the US and Europe Terrain Detail Level 3D terrain map data shows changes in terrain elevations or depressions in the land when you view the map and use it to plot the route map in 3D when you navigate Colour Profiles Nav N Go iGO 8 is able to show the map and the menus in different colours during the day and during the night Select the colour profiles to be used in each mode and select the automatic or manual switching between the daytime and night colour profiles Elevation on 2D Map 2D maps can also display 3D information These top down maps can display elevation by colours and shading 74 Button Description Show Street Names Street names and POI icons can be disturbing on the map during navigation With this switch you can suppress these map elements when Nav N Go iGO 8 is following your position on the map If you move the map both the street names and POI icons reappear immediately Lane Information Some maps contain lane information to help you position your car in the upcoming intersection This setting tells Nav N Go iGO 8 whether to display this information at the top or at the bottom of the map 4 5 2 Sound settings O 6 You can adjust the sounds of Nav N Go GO 8 Tap the following buttons Menu Settings O Sound y Button Description Master Volume Use the switch to mute al
54. gs created after the latest backup will be lost Delete User Data All user data will be deleted and settings will return to their factory defaults Reset Factory Settings All settings will return to their factory defaults but no user data will be deleted 12 4 5 Settings menu You can configure the program settings and modify the behaviour of Nav N Go iGO 8 Tap O 6 the following buttons Menu settings The Settings menu has two pages of submenus Tap to access the other options Settings Lf Settings afd o Pz e Map Screen Sound GPS TMC Route Planning Regional Menu Device Navigation Warnings Track Logs About gt gt lt lt lt Settings 112 Settings 2 2 a lt Track lt lt Simple mode gt dE Simple mode Reference You can fine tune the appearance and content page 74 of the Map screen You can adjust the sounds of Nav N Go iGO 8 page 75 These settings determine how routes will be page 75 calculated These settings allow you to adjust the page 78 application to your local language measurement units time and date and their formats as well as choose the voice guidance profile you prefer You can control how Nav N Go iGO 8 behaves P298 de during navigation You can enable some handy warnings and page 79 disable the touch screen in a moving vehicle with Safety Mode You can set up the connection to the GPS page 80 receiver You can set up the connection to the T
55. hort Economical and Easy Observe the results and choose one of the routes to navigate The Cursor becomes the start point of the route This means that the route will not be started from the current GPS position and Automatic Off route Recalculation needs to be turned off to keep the start point the selected one py Set as Start 99 Button Description lf the Cursor is at or near the selected start point this button m See Siart replaces the previous one and deletes the start point from the route The current GPS position is used again as the start point and Automatic Off route Recalculation is re enabled gt The Cursor is saved as a user POI Select the POI group and give e Save as PO a name for the POI then select a suitable icon enter a phone number and additional information if you like Map locations can be marked with Pins Unlike POls a Pin has no name and other details only a colour to let you tell one from another on the map If the Cursor is at or near a Pin this button replaces the previous E one and deletes the Pin the Cursor is near to amp The Cursor is saved as the location of a Road Safety Camera Bis Save as Camera speed camera or red light camera A new screen appears where you can set the type of the camera the direction of the measured traffic and the speed limit checked if applicable AO If the Cursor is at or near a Road Safety Camera this button ole Edit Camera replaces the
56. ice Profile This button shows the current language of the voice guidance By tapping the button you can select a new one from the list of available languages and speakers Tap any of these to hear a sample voice prompt Just tap OK when you have selected the new spoken language Units You can set the distance units to be used by the program Nav N Go iGO 8 may not support all the listed units in some voice guidance languages If you select a measurement unit not supported by the chosen voice guidance language a warning message will appear Set Date amp Time Format You can set the date and time format Various international formats are available Time and Time Zone You can access time and time zone settings Nav N Go iGO 8 Settings helps you with correcting the device time to the ever accurate GPS time Nav N Go iGO 8 can also help you set the time zone based on your current GPS position Time and Time Zone Settings Button Description Auto Time Correction to Use this feature to synchronise the clock of your device to the GPS very accurate time provided by the GPS receiver Use AWO Time Zone Use this feature to synchronise the time zone of the clock of your device to the time zone based on your current GPS position This is useful if you travel abroad Set Time Zone Set time zone manually if you do not want to synchronise the time zone automatically This allows you to use Auto Time Correction and apply a time zone offset to o
57. image to be used as the menu background image Skin You can choose from a list of available skins to change the look of Nav N Go iGO 8 4 5 10 Device settings You can change some device settings to control the screen backlight when Nav N Go iGO 8 8 EA Device is running Tap the following buttons Menu settings y Button Description Power Management You can set how the backlight will behave when the screen has not been touched for a while You have the following options Backlight Always On The screen is continuously lit Use Device Settings The backlight settings of the device will be applied in Nav N Go iGO 8 Smart When running on battery Smart Powersave will light up the screen only when you press a button tap the screen or if there is something to show you After a few seconds the light level decreases and after another few seconds the backlight turns off This helps achieve a longer battery life ated nens a You can set the backlight level for daytime use Daytime Backlight Intensity at Night You can set the backlight level for night use Autorun Enabled You can instruct the PDA to automatically run Nav N Go iGO 8 when the memory card is inserted Set Screen Orientation You can change the orientation of the screen when running Nav N Go iGO 8 Screen orientation can follow the current orientation of the PDA or you can set a fixed orientation that is independent of the PDA settings 82
58. in the opposite order than before a The route is optimised The start point and the destination remain at a their position but the via points are reordered to make the shortest possible route The selected point is removed from the route The route remains as it Remove was before adding the new point Every time a new point is added the route is recalculated automatically and you can start navigating right away 3 3 Creating a multi point route appending a new destination Multi point routes are created from simple routes so a route must be active first One of the ways of expanding the route is to add a new destination The previous destination becomes the last via point of the route This feature is available in Advanced mode only 1 Select a new location as you did in the previous sections This will be the additional destination in the route 2 The map appears with the selected point in the middle and the Cursor menu opens automatically More Options 7 l 3 Tap to open the full Cursor menu with the additional functions pii Continue 4 Tap to add the point as a new final destination demoting the previous one to the last intermediate destination 5 optional To add more points to the route repeat the above steps as many times as you like Every time a new point is added the route is recalculated automatically and you can start navigating right away 44 3 4 Editing the route This feature is avai
59. ing from the first one through the final destination again You have the following data and functions on this screen Name Description Function Route line Estimated Arrival Distance Left Time Left Method Warning icons The upper part of this screen shows your planned route as a horizontal line Its leftmost point is the start of the route the rightmost one is the final destination and you can see your via point flags along the line spaced in proportion to their distance Shows the estimated arrival time at the final destination of the route based on information available for the remaining segments of the route The calculation cannot take into account traffic jams and other possible delays Shows the distance you need to travel on the route before reaching your final destination Shows the time needed to reach the final destination of the route based on information available for the remaining segments of the route The calculation cannot take into account traffic jams and other possible delays This field shows how the route was calculated It either displays the Route Calculation Method or the Vehicle field from the Route Planning options If you have chosen Car Taxi or Bus the type of the route Fast Short Easy or Economical will be displayed here if you have selected Emergency Bicycle or Pedestrian this information will be displayed here In these square fields graphical symbol are d
60. ion from the map database included in the software product to decompile the map database to use copy modify extend transform the map database in whole or in part or the group of data stored therein or to install it in other products utilise it in other products not even with the aim of achieving a co operation with other products 8 Non warranty limitation of responsibility 8 1 Licensor hereby informs the User that although the greatest care was taken in producing the software product yet with respect to the essence of the software product and the technical limitations the Licensor does not warrant for the software product being completely error free and the Licensor is not bound by any contractual obligation by which the software product obtained by the User should be completely error free 8 2 The Licensor does not warrant that the software product is suitable for any purpose defined either by the Licensor or the User and does not warrant that the software product is capable of co operating with any other system device or product e g software or hardware 8 3 The Licensor does not assume any responsibility for damages incurred due to an error in the software product including errors of the computer program the documentation and the map database 8 4 The Licensor does not assume any responsibility for damages incurred due to the software product not being applicable for any defined purpose or the error or lack of co op
61. ions that you have set earlier appear in the History The procedure is explained starting from the Navigation menu 42 be History gt amp History Tap the following buttons Simple mode or Fmi Advanced mode If necessary turn the page with to see earlier destinations Tap the desired item pa Navigate To The map appears with the selected point in the middle Tap Set as Destination Simple mode or i Advanced mode from the Cursor menu The route is then automatically calculated and you can start navigating 3 1 7 Selecting the destination by entering its coordinate This feature is available in Advanced mode only The procedure is explained starting from the Navigation menu 1 5 Tap the following buttons fina Find Coordinate Coordinate Display Format optional Tap i to change the format of the displayed coordinates Tap the latitude or longitude value to change the coordinate Enter the coordinate values in WGS84 format on the keyboard the latitude N or S and the longitude E or W 50 A ME pa Navigate To The map appears with the selected point in the middle Tap Set as Destination Simple mode or a Advanced mode from the Cursor menu The route is then automatically calculated and you can start navigating 3 2 Creating a multi point route inserting a via point Multi point routes are created from simple routes so a route must be active first One of the ways of
62. is area animated route calculating or of the screen calculation is in recalculating the route progress Next route event next manoeuvre Tap this area to open the Route GPS position and an Information screen active route are available and you navigate the recommended route This area gives you information about the type and distance of the next route event The following area appears next to the above described rounded area When tapping this area the result depends on the information currently shown Tap this area to open If there is no valid GPS position this symbol appears the GPS Data screen to check the signal status or the connection settings Traffic When GPS position s Nothing happens if you tap restriction available but there is noj this area of the screen 18 Second route event manoeuvre after the next manoeuvre Approaching a Road Safety Camera Stops the running simulation Route recalculation progress Indicator strip route to be navigated the traffic restriction of the upcoming intersection is shown here if there is any When GPS position and an active route are both available this field shows the route event that follows the next route event shown in the above described area This icon appears when you are approaching a Road Safety Camera and the warning for cameras is enabled in Settings This icon appears during Route Fly Over Route Simu
63. isplayed in case warnings are attached to the planned Tap this field to change the content of all data fields to via point information Tap this field to change the content of all data fields to via point information Tap this field to change the content of all data fields to via point information Tap this field to change the content of all data fields to via point information Tap this field to change the content of all data fields to via point information Tap any of the icons for an explanation 61 Name Description Function route These are warnings so icons always show information for the whole route even if the data fields display values from your current position to a via point only Opens the Route Planning A options screen from theSettings menu Opens the map screen pian on Map designed for route planning gt Appears only if at least one via point Deletes the next via point A SI exists from the route Delete Appears only if there are no via Deletes the active route ali Route points in the route 4 1 7 Trip Information screen The Trip Information screen has both route and travel data you might need during your 4 04 24 m journey It can be opened directly from the Map screen by tapping the Trip Data field Temet utca Trip Computer Next Via Point The fields on this screen are continuously updated while you keep the screen open When you open the screen all rout
64. l This value is not shown on the map screen 63 Symbol This value appears on the map screen in the Trip Data area This is the value at the top This value appears on the map screen in the Trip Data area This is the value in the middle This value appears on the map screen in the Trip Data area This is the value at the bottom 4 1 7 1 Trip Computer screen The Trip Computer screen provides collected trip data It can be opened from the Trip Coffe Information screen by tapping The fields on this screen are continuously updated while you keep the screen open You can switch between the trips pause then resume them or reset their data You have the following functions on this screen 00 Resets all counters of the currently shown trip Collecting trip data is neve restarted only when Nav N Go iGO 8 receives a position from the GPS Cycles through all trips 4 1 8 Quick menu The Quick menu is a selection of controls that are frequently needed during navigation It can E be opened directly from the Map screen by tapping If you tap any of the switches in the Quick menu except for the Vehicle type the Map screen immediately returns A switch is on if its lamp is lit The Vehicle type button is different It is a 64 multi value button It opens a list of available choices and the symbol of the selected vehicle is shown on the button Main function single tap Function tap and ho
65. l sounds of the device and then to re enable them again The position of the fader determines the volume level The loudness of Nav N Go iGO 8 is independent of your device settings When you exit the program the device default settings return Voice Guidance Volume The slider adjusts the loudness of voice prompts In its leftmost position the voice guidance is suppressed in its rightmost position the master volume applies Key Sounds Key sounds are audible confirmation of either pressing hardware buttons or tapping the touch screen The switch turns the key sounds on or off Key sounds are played at the master volume level Dynamic Volume When driving at high speed the noise in the car may be too loud to clearly hear the voice guidance and other sounds Using Dynamic Volume you can instruct Nav N Go iGO 8 to increase the volume when your speed exceeds a certain minimum and reach its highest volume at the given maximum speed 4 5 3 Route Planning options These settings determine how routes will be calculated Tap the following buttons Menu 8 E Route Planning Settings J Button Description 19 Button Description You can set the type of vehicle you will use to navigate the route Based upon this setting some of the road types will be excluded from the route e g motorways for pedestrians or some of the restrictions may not be taken into account e g emergency vehicles have only a few restrictions
66. lable in Advanced mode only r Gs Edit Route Tap the following buttons Menu Route The list of route points appear with the start point at the top of the list and the final destination at the bottom If several via points exist you might need to turn the page Tap one of the route points in the list You have the following options The selected point moves up in the list becomes a via point to be reached earlier Tap this button repeatedly and the point becomes the start point of the route The selected point moves down in the list becomes a via point to be reached later Tap this button repeatedly and the point becomes the final destination of the route The route is reversed The start point becomes the destination the destination becomes the start point and all via points are to be reached in the opposite order than before a The route is optimised The start point and the destination remain at E a their position but the via points are reordered to make the shortest possible route The selected point is removed from the route Remove As soon as you leave this screen the route is recalculated automatically and you can start navigating right away 3 5 Viewing the whole route on the map Fit to Screen The map can be moved and scaled to show the whole line of the route You do not need to manipulate the map manually The Plan on Map feature does it for you In Advanced mode you have the following opti
67. lation and Track Log route recalculation field shows the recalculation progress between 0 and 100 sounds muted enabled o Track Log recording Tmc TMC status Bluetooth status The following symbols appear in the Indicator strip Description The sound output of Nav N Go iGO 8 is muted The sound output of Nav N Go iGO 8 is enabled Tap this area to open the Itinerary screen with the turn by turn guidance instructions Tap this area to suppress the audible camera warning Tap this area to stop the simulation Nothing happens if you tap this area of the screen Nothing happens if you tap this area of the screen N Track log recording is disabled No TMC receiver is connected or TMC is turned off av N Go iGO 8 records a Track log when GPS position is available TMC receiver is connected and a radio station with TMC broadcast is received s el l E There are new unread TMC events 19 Icon Description _ _ _ A part of the route is mentioned in TMC events but could not be bypassed for example the destination is on a congested street The Bluetooth radio is switched off The Bluetooth radio is turned on but no telephone is connected There is an error in the Bluetooth connection Nav N Go iGO 8 is connected to a telephone as a handsfree set via Bluetooth A phone call is in progress over the Bluetooth connection The following information can be see
68. ld Master Volume slider Adjusts the sound volume of the No action device All sounds of the application are involved If you only adjust the volume you Opens the Navigation need to use this button to return to menu the Map screen Mutes all sounds of Nav N Go iGO 8 Opens Sound settings Switches between the daytime and Opens Colour Profiles night colour schemes manually This settings will not disable the automatic switching between the two schemes the other colour scheme returns at the next scheduled time 3D buildings can be displayed on the Opens 3D Settings map Use this switch to suppress them temporarily Opens Route Planning Tap this button and select the options Vehicle type to be used for route calculation Otherwise it is selected in Route Planning options in Settings page 75 Changing the Vehicle type triggers an automatic route recalculation Turns track log recording on or off Opens Manage Track Logs otherwise controlled on the Manage Track Logs screen Opens the GPS Data screen with No action satellite information data coming from the GPS receiver and a shortcut to the GPS Settings screen if needed GPS receiver detection is automatic When a TMC receiver is connected No action to Nav N Go iGO 8 this button opens the list of TMC messages and provides access to the TMC Settings and the radio station settings screens CES Opens the Bluetooth settings screen
69. marks and 3D buildings are also displayed You can use digital maps interactively you can zoom in and out increase or decrease the scale you can tilt them up and down and turn them left and right In GPS supported navigation digital maps facilitate route planning North up map orientation In North up mode the map is rotated so its top always faces North This is the orientation in 2D map view mode and in Overview mode See also Track up map orientation 84 Overview mode You can instruct Nav N Go iGO 8 to automatically switch to Overview mode if the next route event is in a distance In Overview mode the map is shown in 2D but scaled down to a predefined zoom level When you approach the next route event the previous 2D or 3D map view returns automatically Route A series of destinations to be reached one after the other A simple route contains one start point and only one destination Multi point routes contain one or more via points intermediate destinations The last route point is the final destination and the route is cut into different legs from one destination to the next Scheme Nav N Go iGO 8 comes with different colour schemes for the map for daytime or night use Schemes are custom graphic settings for the map and they can have different colours for streets blocks or surface waters in 2D and 3D modes and they display shades or shadows in different ways in 3D mode One daytime scheme and one night scheme is
70. n leon Description _ _ 4 A The sound output of Nav N Go iGO 8 is muted 54 The sound output of Nav N Go iGO 8 is enabled Nav N Go iGO 8 records a Track log when GPS position is available Track log recording is disabled leon Description _ __ _ __ No TMC receiver is connected or TMC is turned off TMC receiver is connected and a radio station with TMC broadcast is received There are new unread TMC events A part of the route is bypassed based on TMC events A part of the route is mentioned in TMC events but could not be bypassed for example the destination is on a congested street A phone call is in progress over the Bluetooth connection 4 1 1 3 Next two route events Turn Preview fields There are two fields reserved on the Map screen to display the next two manoeuvres route events that are listed in the Itinerary Both the type of the event turn roundabout exiting motorway etc and its distance from the current GPS position is displayed Most of these icons are very intuitive and you also know them as road signs The following table lists some of the frequently shown route events The same symbols are used in both fields leon Description ________ Turn left Turn right Bear right Turn sharp left 55 ey on eon y E Continue straight in the intersection A Enter roundabout The number of the exit is shown in the circle but only for the next turn lo Enter m
71. n a few minutes before sunrise when the sky has already turned bright and a few minutes after sunset before it becomes dark 2 5 4 Colour scheme in tunnels When entering a tunnel the colours of the map change All buildings disappear the large objects such as surface waters or forests and the empty areas between roads become black However roads and streets keep their original colours from the daytime or night colour scheme currently used After leaving the tunnel the original colours return 2 5 5 Route calculation and recalculation Nav N Go iGO 8 calculates the route based on your preferences e Route calculation method e Fast e Short Economical 24 Easy e Vehicle types Car Taxi Bus Emergency vehicles Bicycle Pedestrian e Road types Unpaved Roads Permit Needed Motorways Toll Roads Charge Roads Ferries Cross border Planning Carpool Lanes appears only when used in the USA Nav N Go iGO 8 automatically recalculates the route if you deviate from the proposed itinerary Depending on the type of the TMC event Nav N Go iGO 8 also recalculates the route if a TMC event concerns a part of the recommended route For further information about Route Planning options see page 75 2 5 6 Itinerary The Itinerary is the list of the route events that is the driving instructions Ttinerary 7th 1550m Terstyanszky utca c 1st 24m Matyas kir ly utca Sa Detailed Instructio
72. n in the three data fields shown on the map screen Tap this area to open the Trip Information screen where you can select which values to be shown in these three fields When there is no active route these fields show the following information current speed compass and the current time of day icon Type Moreinformation 7 Siy W 8 Compass Shows the direction of your heading both when the map is automatically rotated 3D and when the map is always facing North 2D Speed There are speed values that can be shown information e Current speed e Speed limit on the current road Time There are time values that can be shown information e Current GPS time Time remaining to reach the destination Time remaining to reach the next via point Estimated arrival time at the destination Estimated arrival time at the next via point Distance There are distance type values that can be shown information e Distance remaining to reach the destination e Distance remaining to reach the next via point Current altitude The next area is a combined status field Tap this area to open the Quick menu page 64 Icon Statusfor More information 20 Icon Status for More information The more lit bars the better is the GPS position position quality Battery The device is running on battery power The number of lit status bars represent the remaining capacity The battery The device is running on external
73. ng of the Accept button displayed by the software during installation or use hereinafter referred to as actions of use shall be deemed as implicit conduct resulting in the conclusion of the Agreement between the User and the Licensor 2 3 Present Agreement shall by no means entitle persons who unlawfully acquire use install on a computer install in a vehicle or utilise in any manner whatsoever the software product 2 4 The end user licence agreement between the Parties shall be concluded with terms set forth in present Agreement 2 5 The time of conclusion of present Agreement is the time of executing the first action of use commencement of use 3 Applicable law 3 1 In issues not regulated by present Agreement the jurisdiction of the Republic of Hungary shall be applicable with specific reference to the Act No 4 of 1959 on the Civil Code CC and to Act No 76 of 1999 on Copyrights CA 3 2 Present agreement is issued in English and in Hungarian In case of dispute the Hungarian text shall prevail 4 The object of the Agreement 4 1 The object of present Agreement shall be the navigation guidance software product of Licensor hereinafter referred to as software product 4 2 The software product shall include the operating computer program its complete documentation and the map database belonging thereto 4 3 Any form of display storage coding including printed electronic or graphic display storage source
74. nly you can also plan a route independently of your current GPS position or even without GPS reception available in Advanced mode only 3 1 Selecting the destination of a route Nav N Go iGO 8 offers you several ways of choosing your destination and via points intermediate destinations Use the selected location on the map the Cursor page 31 Enter a full address or a part of an address for example a street name without a house number or the names of two intersecting streets page 32 Enter an address with postal code page 39 This way you do not need to select the name of the settlement and the search for street names might be faster as well Use a coordinate page 43 Use a saved location e aFavourite page 40 e aPOl page 41 e the History of previously set destinations and waypoints page 42 Tip If you are going to use a route later save it before you start navigating Tap e ri Pp Save Route Route 5 the following buttons Menu 3 1 1 Selecting the Cursor as the destination 1 Locate your destination on the map move and scale the map as needed page 15 Tap the location that you want to select as your destination The Cursor O appears Tap 4s F to open the Cursor menu pa Navigate To The map appears with the selected point in the middle Tap Set as Destination Simple mode or pe Advanced mode from the Cursor menu The route is then automatically calculated and you can s
75. nnection to the GPS receiver Tap the following buttons Menu settings AS GPS _ Button Description GPS receiver The first line of the screen informs you about the connection status of the GPS receiver Connecting the GPS receiver is automatic in Nav N Go iGO 8 so normally you will not need this screen of settings at all GPS Enabled Turn the connection to the GPS receiver on or off Turning off the GPS receiver can be useful for indoors use or demonstration 80 Button Description purposes Port The communication port used between the GPS receiver and the application Baud Rate The communication speed used between the GPS receiver and the application Autodetect Tap this button and let Nav N Go GO 8 find and connect the GPS receiver 4 5 8 TMC settings You can set up the connection to the TMC receiver If the TMC receiver is working you can O e select the radio station to be received Tap the following buttons Menu Settings If there is no TMC receiver connected to Nav N Go iGO 8 you have the following options The first line of the screen informs you about the connection status of the GPS receiver No TMC Hardware Found Connecting the TMC receiver is automatic in Nav N Go iGO 8 so normally you will not need this screen of settings at all Protocol The communication protocol used between the TMC receiver and the application Port The communication port used between the TM
76. ns Bo cco 4 pass on left M7 E71 4 7km M1 E60 Toll road lt When you are on the Map screen you can display the Itinerary in one of the following ways e Tap the area between the Turn preview and the Travel data fields where the symbol of the second next manoeuvre is displayed for example y M E Itinerary e n Advanced mode tap the following buttons Menu Route You have the following options on the Itinerary screen 25 Button Description Any of the list items Opens the map with the selected manoeuvre in the middle Changes the detail level of the ltinerary The levels are as follows Detailed Instructions all intersections are listed Itinerary only significant intersections the ones announced in voice guidance are listed Road list the list of the roads used while navigating the route gt Turns the page for additional list items When the map is open with a manoeuvre in the middle o Button Description Zooms in the map Moves the map to show the previous or next manoeuvre Avoid Opens a screen where you can avoid a part of the route starting from the selected manoeuvre 2 5 7 Track Logs Nav N Go iGO 8 can log the track that you drive page 47 A Track Log is a recording of how your GPS position changed and it is independent of the route Nav N Go iGO 8 calculated Track Logs can be recorded renamed replayed shown on the map exported to a memory
77. nts as you want Destination end point The last point of the route the final destination 57 Symbol Name Description Route colour The route always stands out with its colour on the map both in daytime and in night colour mode The active leg of the route is always displayed in a brighter shade than the inactive upcoming legs Active leg of the route The section of the route on which you are driving If you have not added any via points only a destination the entire route is the active leg If you have added via points the active leg is the part of the route from your current location to the next route point the next via point or the destination if there are no more via points to reach Inactive legs of the route The future sections of the route each of them becomes active when you reach the via point at its beginning Streets and roads that are You can choose whether you want to use or excluded from the navigation avoid certain road types page 75 However when Nav N Go iGO 8 cannot avoid such roads the route will include them and it will show them in a colour that is different from the route colour 4 1 3 Detour menu This screen contains quick detour possibilities during navigation It can be opened directly se n from the Map screen by tapping Detour You have the following options e On the main part of the screen you can see the first page of Saved Search Criteria Select any of the criteri
78. nu A To switch from Advanced mode to Simple mode on the startup screen Navigation Menu 58 tap Settings In landscape screen orientation To switch from Simple mode to Advanced mode on the startup screen Navigation Menu Settings Advanced Mode tap To switch from Advanced mode to Simple mode on the startup screen Navigation Menu tap 6 Simple Mode tap Settings The features and settings available in each mode are as follows Type of action Available in Available in Explanation Simple mode Advanced mode Yes Yes See page 31 Navigating to a street address Yes Yes See page 32 Navigating to a selected map point Navigating to an incomplete address 32 See page 37 Navigating to recent destinations History Yes Navigating to an intersection 10 Type of action Available in Available in Explanation Simple mode Advanced Navigating to Favourites Navigating to a POI Yes Navigating to coordinates Yes Creating a multi point route Yes Saving a map point as a Favourite Yes Yes destination Saving a map point as a POI Yes Saving a map point as a location of a No Yes See page Road Safety Camera Mark a map point with a Pin Yes Saving the active route No Yes See page 48 Saving Track Logs Yes See page 26 74 See page al al picture 82 volume 19 Yes el GA ll 75 selection 18 79 2 2 Hardware buttons You can use Nav N Go iGO 8 mostly by tapping the touch
79. of nearby POls will be displayed e You can check the details of any other location by selecting it on the map 1 Tap the map anywhere to open the map control buttons 2 Tap the desired location on the map The Cursor O appears there The address of the location is displayed at the bottom of the map 3 For further details tap to open the Cursor menu 4 Tap 2 rmo The address the coordinate and the list of nearby POls will be displayed e Itis even easier if you select the desired point in the Find menu Then the Cursor menu 0 MOS opens automatically You only need to tap the button 2 4 2 Manipulating the map Position markers on the map e Current GPS position A page 22 e Selected location Cursor page 23 15 The following controls help you modify the map view to best suit your actual needs Most of these controls appear only if you tap the map once and disappear after a few seconds of inactivity Action Button s Moving the No buttons Opening clo sing map control buttons Rotating left and right Viewing modes 16 Description You can move the map into any direction tap and hold the map and move your finger to the direction in which you want to move the map If GPS position is available and you have moved the map the button appears Tap this button to return to the GPS position Tap this button to show or hide the following map control buttons
80. ollowing buttons gt Simple mode or fmd Fs Advanced mode 2 By default Nav N Go GO 8 proposes the country state and settlement where you are If needed tap the button with the name of the country state and select a different one from the list 3 If needed change the settlement e To select the settlement from the list of recently used ones tap the button e To enter a new settlement 1 Tap the button with the name of the settlement or if you have changed lt City Name gt the country state tap 2 Start entering the settlement name on the keyboard 3 Get to the list of search results e After entering a couple of characters the names that match the string appear in a list e Tap KA Done to open the list of results before it appears automatically 4 Pick the settlement from the list A Enter the street name lt Street Name gt Tap 36 Start entering the street name on the keyboard Get to the list of results e After entering a couple of characters the names that match the string appear in a list e Tap KA Done to open the list of results before it appears automatically a ff searen in an 4 Instead of picking one of the streets tap 5 Enter the house number lt House Number gt ap Enter the house number on the keyboard Tap KA Done to finish entering the address 6 A list appears with the matching addresses Tap the desired one pa Navigate To 7 The m
81. on the following screens e Plan on Map screen When you have an active route you can display it in its full length on the map Track Information screen A track log can be displayed in its full length on the map 17 2 4 3 Status information and hidden controls on the map The following information appears in the rounded field in the top left corner the Turn Preview field When tapping this area the result depends on the information currently shown There is no active route in Simple mode If there is no route to be Tap this area to open Find Address navigated in Simple mode this icon appears in the Turn Preview field There is no active lf there is no route to be Tap this area to open Find route in Advanced navigated in Advanced mode mode this icon appears in the Turn Preview field Tap this area to open the Route There is no valid Ilfan active route exists Information screen GPS position and there is no valid GPS position the view of the sky above you is shown with coloured dots for each satellite Some dots need to turn green to be able to navigate If the icon is ajGPS position and an Tap this area to make Nav N Go static picture route active route are iGO 8 recalculate the recommended calculation is available but automatic route needed off route recalculation is switched off and you deviated from the route If the icon is Nav N Go iGO 8 is Nothing happens if you tap th
82. ons to enter Plan on Map 52 0 55 e Via the Find menu tap Menu find M Gp Route info Ex e Via the Route Information screen tap Menu Route Plan on Map W 1 Plan on Map e Via the Route Information screen using a shortcut tap In Simple mode the last option is available only 3 6 Watching the simulation of the route This feature is available in Advanced mode only 45 The procedure is explained sarino from the Map screen a 1 Tap the following buttons Menu l 2 The Route menu appears There are two ways of running the route simulation a Fly Over e Tap to run the simulation at high speed to give you a quick overview of the route e Tap fe ELS to run the simulation at normal speed and with voice guidance instructions announced This option is for demonstration purposes or for checking difficult parts of the route in advance 3 The simulation can be aborted any time by tapping a 3 7 Enabling Safety Mode This feature is available in Advanced mode only Safety Mode disables the touch screen above 10 km h 6 mph to keep your attention on the road While driving you will not be able to set a new destination or to change settings The only screen control that remains enabled is the gesture that puts you back on the Map screen The procedure is explained ai from the Map screen Eta ANG Safety Mode Tap the following buttons Menu 3 8 Pausing the active route You
83. or object code of the software product or any other as yet indefinable form of display storage or coding or any medium thereof shall be deemed as part of the software product 4 4 Error corrections additions updates used by the User as defined in Section 2 following the conclusion of present contract shall also be deemed as part of the software product 5 Owner of copyrights 5 1 The Licensor unless contractual or legal regulations state otherwise is the exclusive owner of all material copyrights vested in the software product 5 2 Copyrights extend to the whole software product and its parts separately as well 5 3 The owner s of the copyrights of the map database forming part of the software product is are natural person s or corporate entity es as listed in the appendix to present Agreement or in the About Map menu item of the operating computer program hereinafter referred to as Database Owner Licensor hereby states that Licensor has obtained sufficient 86 usage and representation rights from the Database Owner in order to utilise and give into further utilisation the map database as set forth in present Agreement 5 4 In conclusion and execution of present Agreement the Database Owner is represented by Licensor in relations to the User 5 5 By concluding present Agreement Licensor shall withhold all rights vested in the software product except for those that the User is entitled to according to explicit l
84. otate left right 3D map only Tilt up down 3D map only Zoom preset buttons 2D map only Tilt and zoom preset buttons 3D map only Return to GPS position button Smart Zoom button Rotates the 3D map left or right Tilts the 3D map Scales the map Tap this button to move the map back to the current GPS position If the map has been rotated in 3D mode automatic map rotation is also re enabled Tap this button once to enable Smart Zoom Tap hold the button to set the zoom limits of Smart Zoom Tap one of the preset buttons to set the zoom level to a fix predefined value Smart Zoom is disabled These buttons are avallable in 2D mode Tap amp hold any of the buttons to set its value to the current zoom level Symbol Name Action or to reset it to its original value Tilt preset buttons available in lap one of the preset buttons Advanced mode only Tap one of the preset buttons to set the tilt and zoom levels to fix predefined values Smart Zoom is disabled These buttons are available in 3D mode Tap amp hold any of the buttons to set its value to the current tilt and zoom levels or to reset it to its Original value Current GPS _ position on n a nearest road Cursor selected map location Lane information 4 1 1 Icons on the map There are several status icons on the map Most of them also function as a button The information they provide is as follows e GP
85. otorway Exit motorway In certain situations when route events are not important these fields show other useful pieces of information They are described here page 18 4 1 2 Objects on the map 4 1 2 1 Streets and roads Nav N Go GO 8 shows the streets in a way that is similar to how the paper road maps show them Their width and colours correspond to their importance you can easily tell a motorway from a small street Tip If you prefer not to see street names during navigation turn them off page 74 4 1 2 2 3D object types To enable or disable 3D visualisation on the map tap the following buttons Menu Settings JEN Map Screen 3D Settings Nav N Go iGO 8 supports the following 3D object types 3D landmarks Landmarks are 3D artistic or block representations of prominent or well known objects 3D landmarks are only available in selected cities and countries 96 Elevation model Hills and mountains are shown in the background of the 3D map view and illustrated by colour on the 2D map Elevated roads Complex intersections and vertically isolated roads such as overpasses or underground tunnels are displayed in 3D 3D buildings Full 3D city building data that represents actual building size and position on the map Building data is limited to the city centre of major cities in the US and Europe 3D terrain 3D terrain map data shows changes in terrain elevations or depressions in the l
86. ows the mode the button switches amp gt 3D to If you are in 2D mode you can see the button and you need to tap it to switch to 3D mode Nav N Go iGO 8 can automatically rotate scale and tilt the map and give you the optimal view e When you are approaching a turn Nav N Go iGO 8 zooms in and raises the view angle to let you easily recognise your manoeuvre at the next junction If the next turn is at a distance Nav N Go iGO 8 zooms out and lowers the view angle to show you the road in front of you Tap this button once to enable Smart Zoom Tap amp hold the button to set the zoom limits of Smart Zoom Tap this button to move the map back to the current GPS position If the map has been rotated in 3D mode automatic map rotation is also re enabled Tap one of the preset buttons to set the zoom level to a fix predefined value Smart Zoom is disabled These buttons are available in 2D mode Tap amp hold any of the buttons to set its value to the current zoom level or to reset it to its original value Tap one of the preset buttons to set the tilt and zoom levels to fix predefined values Smart Zoom is disabled These buttons are available in 3D mode Tap hold any of the buttons to set its value to the current tilt and zoom levels or to reset it to its original value lt a Stow 7 Nav N Go iGO 8 shows the scale of the map in 2D mode This button does not appear on the Map screen It is available
87. p Areas in cities and towns e Elsewhere at all other locations There are two types of warnings You can turn them on or off independently e Audible Warning A voice message is played using the selected voice guidance profile Visible Warning A symbol with the speed limit appears in the 50 corner of the map for example CD This feature allows you to receive a warning when approaching a Road Safety Camera You must ensure on your own liability that using this feature is legal in the country where you intend to use it You have the following options e Audible Warning beeps can be played while you are approaching the camera or just alert sounds if you exceed the speed limit while approaching one of these cameras Visible Warning the type of the camera and the controlled speed limit appears on the Map screen while you are approaching one of these cameras Enable this warning to be alert if pedestrian mode is activated and you drive fast You are asked if you want to change to car navigation mode This way you can be sure you will not be routed via one way roads in the wrong direction as a pedestrian could for example Safety Mode disables the touch screen above 10 km h 6 mph to keep your attention on the road While driving you will not be able to set a new destination or to change settings The only screen control that remains enabled is the gesture that puts you back on the Map screen QQ 6 You can set up the co
88. playback of the selected Track Log on the map 69 Turns the page for additional list items When track log details are shown Button Description __________ Button with the name of the Opens a keyboard screen to let you rename the Track Log Track Log Tap this button to hide the Track Log on the map No colour will be assigned to the Track Log Tap one of the coloured buttons to assign a colour to the Track Log The Track Log will be shown on the map with this colour xy Fit to screen The map returns with the Track Log The map is scaled to show the whole Track Log Deletes the selected Track Log Delete Saves the Track Log on the inserted memory card in GPX format 4 4 4 Manage Favourites A el You can manage the list of your Favourites Tap the following buttons Menu Manage Say Favourites Button O Description Button with the name of the Opens the selected Favourite for editing Favourite mo Deletes the selected item in the list of Favourites Clears the list of Favourites Turns the page for additional list items 4 4 5 Manage POIs You can manage your POls and set the POI visibility for both your POIs and the ones that CO ie POI came with the product Tap the following buttons Menu Manase Button Icon Button with the name of Opens the list of the subgroups of this POI group The new list the POI group behaves the same as this one Button with the name and Opens the select
89. power The battery is a being being charged charged a Vehicle type The symbol displays the vehicle type used for route calculation 2 4 4 Using the Cursor the selected map location First place the Cursor at the desired map location with one of the following options e Use the Find menu to select a location The map returns with the selected point the Cursor in the middle and the Cursor menu appears with the available options e Tap the screen and tap again to place the Cursor at the desired location Now tap Cursor to open the Cursor menu You can perform the following actions In the active route uses the Cursor as the start point by replacing 2 Set as Start the current GPS position available in Advanced mode only sy In the active route uses the Cursor as the destination by replacing set as Destination the previous destination In the active route uses the Cursor as a via point an intermediate Insert as Via destination preceding the destination available in Advanced mode only In the active route uses the Cursor as the destination while pa Continue keeping the previous destination as a via point available in Advanced mode only ee Shows the different routes calculated by the available routing pe Routing Methods methods Choose the one that suits your needs the best available in Advanced mode only Saves the Cursor as a POl available in Advanced mode only d Saves the Cursor as a Favo
90. ption of the different menu screens of Nav N Go GO 8 in Advanced mode In Simple mode these functions work the same way but only a few of them are available The Navigation menu Nav N Go iGO 8 starts with the Navigation menu From there you can access the following screens Screen Button Description Selecting the destination for example an address or a POI or using the search engine of Nav N Go iGO 8 for any other reason for example to look for the phone number of a POI Managing the active route obtaining information about it changing or deleting it or parts of it or planning a route without GPS reception Managing user data such as saved locations POls Favourites Pins and History items Saved Routes and Track Logs Managing the behaviour of Nav N Go iGO 8 for example the map layout during navigation the used languages or the warnings Settings 4 1 Map screen Nav N Go iGO 8 is primarily intended for land navigation That is why maps in Nav N Go iGO 8 look similar to paper road maps However Nav N Go iGO 8 provides much more than regular paper maps you can customise the look and the content of the map The most important and most often used screen of Nav N Go iGO 8 is the Map screen A93 E60 A Eiberg 50 130 Saint Margaret Street A302 EA o 3213 860m 3 59 44 imh During navigation the screen shows route information and trip data left screenshot but when you t
91. r selections and applies the new settings without confirmation as soon as you use the controls Slider Program Language English UK ES English US me English UK 2 8 ot a a Wettminsier Landaa Uni fed Kingdom Tap it to initiate a function to open a new screen or to seta parameter Shows status information When you need to select from several options they appear in a list When a feature has several different unnamed values Nav N Go iGO 8 shows an indicator on a gauge that displays and sets a value from a range When there are only two choices a checkmark shows whether the feature is enabled Alphabetic and alphanumeric keyboards to enter text and numbers Tap it once Some icons also function as a button Tap them once Turn the page with the and buttons and tap the value that you want e Drag the handle to move the slider to its new position e Tap the slider where you want the handle to appear the thumb jumps there Tap it to turn the switch on or off Each key is a touch screen button 13 fejwielels Ee iele pooconang o Boor a aA ay Kaye Dona 2 3 1 Using keyboards You only need to enter letters or numbers in Nav N Go iGO 8 when you cannot avoid it You can type with your fingertips on the full screen keyboards and you can switch between various keyboard layouts for example ABC QWERTY or numerical Switching to another k
92. s tap the button o To enter a new settlement 38 1 Tap the button with the name of the settlement or if you have changed lt City Name gt the country state tap 2 Start entering the settlement name on the keyboard 3 Getto the list of search results e After entering a couple of characters the names that match the string appear in a list e Tap KA Done to open the list of results before it appears automatically Pick the settlement from the list a City Centre Tap the button pa Navigate To 5 The map appears with the selected point in the middle Tap Set as Destination Simple mode or pe Advanced mode from the Cursor menu The route is then automatically calculated and you can start navigating 3 1 2 7 Entering an address with a postal code All of the above address searching possibilities can be performed with entering the postal code instead of the settlement name Find below an example with a full address The procedure is explained starting from the Navigation menu Ae Address ey e yr 1 Tap the following buttons Simple mode or fmd Fast Advanced mode 2 By default Nav N Go iGO 8 proposes the country state and settlement where you are If needed tap the button with the name of the country state and select a different one from the list 3 Tap the button with the name of the settlement and enter the postal code 1 Start entering the postal code on the keyboard
93. s and other possible delays Shows the current time corrected with time zone offset The accurate time comes from the GPS satellites and the time zone information comes from the map or it can be set manually in Regional settings Shows the elevation if it is provided by the GPS receiver Shows the speed limit of the current street if the map contains it If you tap the previous button this one replaces it Tap this field to show it on the map screen in one of the Trip Data fields Tap this field to show it on the map screen in one of the Trip Data fields Tap this field to show it on the map screen in one of the Trip Data fields Tap this field to show it on the map screen in one of the Trip Data fields Tap this field to show it on the map screen in one of the Trip Data fields Tap this field to show it on the map screen in one of the Trip Data fields Tap this field to show it on the map screen in one of the Trip Data fields Opens a new screen with three resettable Trip Computers Tap this button to change the content of the Route Data fields to show information about the next via point Tap this button and the Route Data fields show information about the final destination again Most of the fields on this screen have a A symbol next to them This symbol shows whether the field it is attached to is shown on the map as a Trip Data It also shows the position of the data as follows Symbo
94. screen The device has only a few hardware buttons You can turn mobile devices on or off at any time When mobile devices is switched off Nav N Go iGO 8 does not calculate your GPS position and it does not update the route or the driving instructions When you turn the device on again Nav N Go iGO 8 continues navigating as soon as the GPS receiver has determined your position The functions of the hardware buttons are the following the actual layout of buttons might be different on your PDA 11 Screen button equivalent 2 Tilts up in 3D map view 7 merereww A Toggles between two screens for the Route Information screen for the Itinerary Opens the Map screen AM va in the Navigation menu e Route Information screen e e Itinerary Rotates left in 3D map view Back to Navigation No equivalent for e Repeats the last voice guidance instruction side a the voice with updated distance information Instruction If necessary re enables normal navigation A Lock to Position and Track up map for re enabling orientation normal navigation 2 3 Buttons and other controls on the screen When you are using Nav N Go iGO 8 you usually tap buttons on the touch screen You only need to confirm selections or changes in Nav N Go iGO 8 if the application needs to restart it needs to perform a major reconfiguration or you are about to lose some of your data or settings Otherwise Nav N Go iGO 8 saves you
95. sual name fewer letters are enough to find it e If one of the streets is shorter search for that one first You can then find the second one faster You can search for both the type and the name of a road If the same word appears in several names for example in the name of streets roads and avenues you can obtain the result faster if you enter the first letter of the street type For example enter Pi A to obtain Pine Avenue and skip all Pine Streets and Pickwick Roads You can also search in postal codes This is useful when a street name is common and it is used in several districts of a city 3 1 3 Selecting the destination from your Favourites You can select a location that you have already saved as a Favourite to be your destination The procedure is explained starting from the Navigation menu 40 7 Favourites iad ctas 1 Tap the following buttons Simple mode Advanced mode 2 Tap the Favourite that you want to set as your destination pa Navigate To 3 The map appears with the selected point in the middle Tap Set as Destination Simple mode or i Advanced mode from the Cursor menu The route is then automatically calculated and you can start navigating 3 1 4 Selecting the destination from the POIs You can select your destination from the POIs included with Nav N Go iGO 8 or from the ones you have previously created The procedure is explained starting from the Navigation menu vy Find POI
96. ta from both the green and yellow satellites Signals from the yellow satellites are only received while green ones are used by the GPS to calculate 66 your current location Icon Colour Name Description nla Coordinates Your current GPS position in WGS84 format Status bar for the satellites Dark bars are for the yellow and lit bars are for the green satellites The more satellites your GPS tracks the green ones the better is your calculated position n a 4 2 Find menu BH gt Select the destination of your route Tap the following buttons Menu find Button Description Reference gt If you know at least a part of the address this is the page 32 eres quickest way to find the location You can select your destination from the thousands page 41 of POIs included with Nav N Go iGO 8 or from the ones you have previously created The destinations that you have already entered in page 42 History Nav N Go iGO 8 are available in the History list Find You can select your destination by entering its page 43 Coordinate coordinates 5 Favourites You can select as your destination a location that page 40 you have already saved as a Favourite Pa Ge Opens a special 2D map screen optimised for route gt planning Only the Zoom in and Zoom out buttons and the route modification buttons of the Cursor menu appear Find POT 4 3 Route menu O MC Save load and edit your routes Tap th
97. tart navigating 31 appears save it as a POI or put it on the list of your Favourites first The Cursor menu returns automatically with the same point Now you can use it as a route point 3 1 2 Entering an address or part of an address If you know at least a part of the address it is the quickest way to select the destination of the route Using the same screen you can find an address by entering e the exact address including house number e the centre of a settlement e an intersection e the midpoint of a street e any of the above starting the search with the postal code page 39 3 1 2 1 Entering an address Europe In some countries states are not used in addressing After selecting the country the next step is to define the settlement There are four lines on the screen Find Address a lt Enter Street Name gt lt House NuMmber gt The procedure is explained starting from the Navigation menu 3 Find Address y gt 1 Tap the following buttons Simple mode or fma find Address Advanced mode 2 By default Nav N Go iGO 8 proposes the country and settlement where you are If needed tap the button with the name of the country and select a different one from the list 3 If needed change the settlement gt e To select the settlement from the list of recently used ones tap the button e To enter a new settlement 1 Tap the button with the name of the settlement or if you
98. tion and re enables automatic map rotation after the given period of inactivity Automatic Overview This feature switches the map view to Overview mode when the next route event is at a distance Overview is a zoomed out 2D view to let you see the surrounding area You have the following controls for Automatic Overview e Turn Distance for Overview The map view will be switched to Overview mode if the next route even is at least as far as this value Default Zoom Level Overview mode will appear with this zoom level You can scale the map in Overview mode but next time Overview appears again this zoom level will be applied 4 5 6 Warning settings You can enable some handy warnings and disable the touch screen in a moving vehicle with E 6 Safety Mode Tap the following buttons Menu settings Button Description Warn When Speeding Maps may contain information about the speed limits of the road segments Nav N Go iGO 8 is able to warn you if you exceed the current limit This information may not be available for your region ask your local dealer or may not be fully correct for all roads in the map This setting lets you decide whether you wish to receive the warnings You can set the relative speeding at which the application 19 Button Description Speed Camera Warning Warn if Too Fast for a Pedestrian Safety Mode 4 5 7 GPS settings warns you 100 is the current speed limit e In Built u
99. tons in the Quick menu to open screens from the Manage menu or the Settings menu related with the function of the button In portrait screen orientation there are symbols instead of labels on the buttons at the bottom of the screen Tap and hold any of these buttons and its name pops up at the centre of the screen You do not need gestures to access the basic navigation features You need to drag and drop the screen only in cases like Moving the handle on a slider Moving the map grab the map and move it in the desired direction Shortcut to open the Map screen slide your finger from the bottom right corner to the bottom left corner on any screen Shortcut to open the Navigation menu slide your finger from the top left corner to the bottom left corner on any screen Start using Nav N Go iGO 8 When Nav N Go iGO 8 is started the first time you need to do the following 1 Select the written language of the application Later you can change it in Settings page 78 2 Select the language and speaker used for voice guidance messages Later you can change it in Settings page 78 3 Select whether to start the program in Simple mode or in Advanced mode Later you can switch between the two operating modes in Settings After this the Navigation menu appears and you can start using Nav N Go iGO 8 The Navigation menu in Simple mode Navigation Menu Tap one of the buttons ne ow elect your destinatio Navig
100. trom the HIStory a a Sella 42 3 1 7 Selecting the destination by entering its COOrdIMA 8 oooononnnnncnnnnnnnnnnnnnonnnnnononnnnnnnnnnnnnnnnnnnnnnnnnnonnnnns 43 3 2 Creating a multi point route inserting A VIA point oooccccnncnnnnnnnnnnnnnnnnnnnnnnnannnnnnnnnnnnnnannnnnnnos 43 3 3 Creating a multi point route appending a new destinati0W oooccccnnnnnnnnnnnnnnnnnnnnononannnnnnnnns 44 E ase Oe 45 3 5 Viewing the whole route on the map Fit t0 Screen ocooccccooonannnnnnnnnnnnnnononnnnncnnnnnnnnanannnnnnnos 45 3 6 Watching the simulation Of the route ooooonccnnnnccnnnnnnnnnnnnnnnnnnnnnnnnannnnnnnnnnnnnnnnnnnnnnn non nnnnnnnnnnnnnnoss 45 3 NAOMI ES E E AE sheesh E E eS 46 VO FAUS TINE ACHY 6 ROUTE is a tn a E aciaisa di 46 3 9 Deleting the next Vid point from the route irois cand ladenstectedsantadaseseatoedes 46 LO Delenng he GCUVE OIE os 47 BAT USING ATADOS A A a 47 ALZA VIE AQUA id 48 SAIS Lodd T A SAVEC TOUS A OS 48 4 Reference book Advanced Mode sossessesssossesseossossessesssossessesssossessssosossessssssossess 50 MIME O A e O atta ta 50 A We AC OMS OTN Ee TINA eestor att e ue a A 53 4 1 1 1 Battery GPS position quality and Vehicle type INdiCOtOT oooooonnnnnnnnnnnnnnnnnnnnnnnnnonnnnnannnnnnnnnnnnnnnnnnnnnnnos 53 PANA ZAS TAILS LOT SADA A as 54 4 1 1 3 Next two route events Turn Preview fields cisci aS 55 A O CCIS OM TNS MAP ss vean cic os paced aust OP O A N 56 hd 2 TECOS ANG TORSO Deo 56 RALLA
101. urite location Y Add to Favourites Saves the Cursor as a Road Safety Camera location available in Advanced mode only D oly Save as Camera 21 mode only Opens a screen with the name address and coordinate information of the Cursor and the list of POIs near it 1 Place P Marks the map with a Pin at the Cursor available in Advanced ace Pin 2 5 Nav N Go iGO 8 concepts 2 5 1 Smart Zoom Smart Zoom is a lot more than just a usual automatic zoom e While following a route calculated by Nav N Go iGO 8 when approaching a turn it will Zoom in and raise the view angle to let you easily recognise your manoeuvre at the next junction If the next turn is at a distance it will Zoom out and lower the view angle to be flat so you can see the road in front of you e While driving without an active route in Nav N Go iGO 8 Smart Zoom will zoom in if you drive slowly and zoom out to the limit set here when you drive at high speed Enabling Smart Zoom EL Tap the map to let the map control buttons appear and then tap ai to enable Smart Zoom Fine tuning Smart Zoom Teal Tap the map to let the map control buttons appear and then tap and hold al a to open the Smart Zoom Settings window Modify the zoom limits of Smart Zoom if necessary 2 5 2 Position markers 2 5 2 1 Current GPS position and Lock on Road When your GPS position is available Nav N Go GO 8 marks your current position with the icon on the map The e
102. xact location of the position marker depends on the vehicle type used for route calculation The vehicle type can be selected in Route settings page 75 or in the Quick Menu page 64 22 e f you choose pedestrian The A icon is at your exact GPS position The direction of the icon shows your actual heading e If you choose any of the vehicles The A icon is aligned to the nearest road to suppress GPS position errors The direction of the icon is one of the directions of the route To use the current GPS position tap Position The Position menu appears and you can save the GPS position as one of the following e aFavourite e aRoad Safety Camera e aPOl e amap marker Pin 2 5 2 2 Returning to normal navigation When GPS position is available and you have moved the map the A icon is moving or is not even visible or you have rotated the map in 3D mode the A button appears Tap it to move the map back to the GPS position and re enable Track up map orientation automatic map rotation EY Note Even if you move the map while you are driving Nav N Go iGO 8 continues navigating if there is an active route it plays the voice instructions and displays the turn preview icons according to your current GPS position 2 5 2 3 Selected location Cursor If you select a location in the Find menu or you tap the map when the map control buttons are visible the Cursor appears at the selected point on the map Nav N Go iGO 8 displays
103. xpense of the person in breach and may claim the destruction of instruments and materials used for the breach and that of the objects created by the breach 9 1 6 claim damages 9 2 The Licensor hereby also informs the User that the breach of copyrights and related rights is a crime according to Act IV of 1978 on the Criminal Code which may draw as a sanction a sentence of two years in prison in basic cases and up to eight years in prison in qualified cases 9 3 For disputes arising from present Agreement the parties hereby agree on the exclusive competence of depending on value and title disputed either the Central Court of Budapest Districts Pesti K zponti Keruleti B r s g or the Municipal Court of Budapest F v rosi B r s g 88

User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents