User Manual
Contents
1. FERS RavenLink User Manual A500 09 0005 Version v1 00 FORSBERG SERVICES LTD RICHMOND HOUSE WHITE CROSS LANCASTER LA1 4XF UNITED KINGDOM TEL 44 0 1524 383320 FAX 44 0 1524 382939 THIS DOCUMENT IS THE PROPERTY OF FORSBERG SERVICES LIMITED It is issued for the information of such persons only as need to know its contents in the course of their work Any person finding this document should contact Forsberg Services Limited for its safe return to the address on this page with particulars of how and where found Ravenlink User manual A0500 09 0005 V1 00 Distribution Name o Establishment Copy No v1 00 SM 11 05 15 Page i Template Version 2 03 Revision Date 26 06 2013 Forsberg Services Limited Company Registration No SC 104949 Registered Office Forsberg Services Ltd 1 East Craibstone Street Aberdeen AB11 6YQ Ravenlink User manual A0500 09 0005 V1 00 Proprietary Notice Information in this document is subject to change without notice and does not represent a commitment on the part of Forsberg Services Limited The information within this document is understood to be true and correct at the time of publication No part of this document may be reproduced or transmitted in any form or by any means electronic or mechanical including photocopying or recording for any purpose without the express written permission of Forsberg Services Limited If there is any doubt please contact Forsber2. Fault Condition Page 5 Yes Template Version 2 03 Revision Date 26 06 2013 Forsberg Services Limited Company Registration No SC 104949 Registered Office Forsberg Services Ltd 1 East Craibstone Street Aberdeen AB11 6YQ Ravenlink User manual A0500 09 0005 V1 00 9 Legal Notices FCC Part 15 This device complies with Part 15 of the FCC Rules Operation of this product is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation This equipment has been tested and found to comply within the limits for a class B digital device pursuantto Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorientor relocate the receiving antenna e Increase the separation b
3. typical 600m A m ax 3 71x 6 1 x 4 92in 94 20x 155 0x 125 1 mm 3 0 Ibs 1 36 kg Relative Humidity 0 10096 condensing Temperature 40 to 158 F 40 to 70 C Temperature Storage 67 to 185 F 55 to 85 C Altitude maximum 20 000 ft 6 096 m Die cast Aluminum IP66 Rated TNC from antenna designated for antenna gain of 34dB 6 3bB Male 2 pin binder series 423 12 24V ACor DCtypical ST Type Fiber Optic Simplex Multimode 50 125 Female 2 pin Binder Series 423 Yes Page 4 5VDC Do not apply external voltage to antenna port Template Version 2 03 Revision Date 26 06 2013 Forsberg Services Limited Company Registration No SC104949 Registered Office Forsberg Services Ltd 1 East Craibstone Street Aberdeen AB11 6YQ 8 2 RVL 1 Receiver Ravenlink User manual A0500 09 0005 V1 00 GPS L1 L2 L5 L Band 800MHz 1 800MHz 500 Power Requirements 5V 12VDCfrom GPS Receiver Power Consumption 60mA typical 1 62 x 3 2x 1 25in 41 20 x 81 15 x 31 75 mm lt 0 21 Ibs 92 kg Relative Humidity 0 95 non condensing Temperature 32 to 122 F 0 to 50 C Temperature Storage 58 to 185 F 50 to 85 C Extruded Aluminum ST Type Fiber Optic Sim plex Multimode 50 125 BNC 50Q female Pow er Fault LED Green Normal Operations Red
4. 100ft 30 5m we strongly recommend using an inline amplifier 2 Connectthe other end of the coaxial antenna cable to the TNC female connector marked From Antenna on the Ravenlink Transmitter For more information on installing the antenna see the installation guide included with the GPS antenna Do not apply any external voltage to the antenna port 3 Connectone end of the fibre optic cable multimode 50 125 fiber optic cable with ST connectors to the ToReceiver connector on the Ravenlink Transmitter For more information on installing the fibre optic cable see the instructions included with the cable Page 1 Template Version 2 03 Revision Date 26 06 2013 Forsberg Services Limited Company Registration No SC104949 Registered Office Forsberg Services Ltd 1 East Craibstone Street Aberdeen AB11 6YQ Ravenlink User manual A0500 09 0005 V1 00 4 Connectthe Binder end of the power supply cable included to the Power connector on the Ravenlink Transmitter Do not connect the power supply at this time 5 Connectthe fibre optic cable from the Ravenlink Transmitter to the Ravenlink Receiver installed inside of the building Connect the cable to the Ravenlink Transmitter connector Do not kink or make sharp bends with the fibre optic cable 6 Connecta coaxial antenna cable not included to the BNC female connector marked To GPS Receiver on the Ravenlink Receiver 7 Connectthe other end of the coaxial antenna cable to t
5. 1040 10 C FC T OS ine MADEIN US A 5 TO FROM POWER RECEIVER ANTENNA RVL 1 Ravenlink Receiver RVL 1 Ravenlink Transmitter Power cable If any components are missing contact Forsberg Services Ltd on 01524 383 320 Page 5 Template Version 2 03 Revision Date 26 06 2013 Forsberg Services Limited Company Registration No SC104949 Registered Office Forsberg Services Ltd 1 East Craibstone Street Aberdeen AB11 6YQ Ravenlink User manual A0500 09 0005 V1 00 3 Items you need to supply e GPS antenna L1 L2 L Band GPS L5 e GPS Receiver e Power supply for the Ravenlink Transmitter see specifications on page 9 for more information e Multimode 50 125 fibre optic cable with ST connectors e Two 50 OQ antenna cables e Line amplifier required if antenna and transmiteer are more than 100 feet from each other Recommended FSL LA 21 L1L2 T Page 6 Template Version 2 03 Revision Date 26 06 2013 Forsberg Services Limited Company Registration No SC104949 Registered Office Forsberg Services Ltd 1 East Craibstone Street Aberdeen AB11 6YQ Ravenlink User manual A0500 09 0005 V1 00 4 Identifying components 4 1 Ravenlink Transmitter Ant nna connector Ravenlink Receiver connector Power connector External Connectors Description Power Connector Provides power to the transmitter Ravenlink Receiver Connector ST Sends the GPS signal to the Ravenlink Receiver Antenna Connector TNC Re
6. ceives the GPS signal from the GPS antenna Page 7 Template Version 2 03 Revision Date 26 06 2013 Forsberg Services Limited Company Registration No SC104949 Registered Office Forsberg Services Ltd 1 East Craibstone Street Aberdeen AB11 6YQ 4 2 Ravenlink Receiver External Connectors Power Fault Indicator Ravenlink User manual A0500 09 0005 V1 00 Power Fault Indicator Ravenlink transmitter Description Indicates power and signal strength as follows e Green System is working correctly e Red Fibre optic cable is not connected or antenna is not connected Ravenlink Transmitter Connector ST Receives the GPS signal from the Ravenlink Transmitter GPS Receiver Connector BNC Page 8 Sends the GPS signal to your GPS receiver Template Version 2 03 Revision Date 26 06 2013 Forsberg Services Limited Company Registration No SC104949 Registered Office Forsberg Services Ltd 1 East Craibstone Street Aberdeen AB11 6YQ Ravenlink User manual A0500 09 0005 V1 00 5 Setting up the Ravenlink system 5 1 Mounting the Transmitter Mount the transmitter as follows The Ravenlink Transmitter is weather resistant and may be mounted outdoors or indoors The transmitter is constructed to withstand extreme temperatures and adverse weather conditions Thetransmitter must be mounted at least 3 feet below the GPS antenna e If there is more than 100 feet of cable used in the insta
7. etween the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced technician for help FCC warning Changesor modifications not expressly approved by the party responsible for compliance with the FCC Rules could void the user s authority to operate this equipment DHHS and FDA safety certification This product is made and tested to meet safety standardsof the FCC requirements and compliance with safety performance of the U S Department of Health and Human Services and also with FDA Radiation Performance Standards 21 CFR Subchapter J California Proposition 65 This product its packaging and its components contain chemicals known to the state of California to cause cancer birth defects or reproductive harm This notice is provided in accordance with California s Proposition 65 1999 5 EC Marking by the symbol cE indicates compliance of this equipment to the Radio and Telecom Terminal Equipment Directive 1999 5 EC Such marking is indicative that this equipment meets or exceeds the following technical standards e EN 55022 1998 CISPR 22 Information technology equipment Radio disturbance characteristics e EN 60950 1 20006 Safety of Information Technology Equipment e EN 50083 1 1997 Electromagnetic Compatibility Generic Immunity standard e EN 300 328 v1 7 1 Electromagnetic Compatibility and Radio Spectrum Matter
8. g Services Ltd on 44 0 1524 383320 O 2015 Forsberg Services Limited All rights reserved Page ii Template Version 2 03 Revision Date 26 06 2013 Forsberg Services Limited Company Registration No SC104949 Registered Office Forsberg Services Ltd 1 East Craibstone Street Aberdeen AB11 6YQ Ravenlink User manual A0500 09 0005 V1 00 i Contents EET CADCM 4 2 Package contents 5o oo or rode done ER Ec POET E Pa edd AFbsv E Oui ev E E 5 3 Items YOU need to supply iisecei pne psa enean n ago DnxS saka Suae s aul Pda xk a IuaE Sn FUE saa REGEM 6 4 Identifying componhelts 2 onere iioi Loon Ev adi nue Dopo a sosser stuss Tu Y eU ioc Leere MEE s EET V du 7 4 1 Ravenlink Transmitter hic soot eei ceo eec reae Se EE ee PRSE EGER Ta RES CPN bien AAAA RESSERRER rni 7 4 2 Ravenlink ReceNVer s cede cocinero aree deri athens ei Geo iae aep SUPR e ERE e ETUR do e ISE 8 5 Setting up the Ravenlink system eeeeee eee ee esee ee eene enne nnn nnne n nennen nne nnne 9 5 1 Mounting thesrransmittet eoo ett etm etait tte 9 5 2 Mounting the Receiver inu RR ER tai ERR XR ENS R RE RT R ERR TEE SN RS ERR VAR RR CEN ERRAT aS 9 6 Connecting the Ravenlink system Lecce eese eese eene eene enne nnne nnne nnne nnne nenne 1 7 Troubleshootllg 3 co edisid dno exa rl ee van ehe c si aaa cov eie sia aV dla seda cov ae Se dM TR AR erae 3 EE ul jic i get H 4 8 1 RVE T Transmit
9. he GPS receiver For more information on installing the receiver see the installation guide included with your GPS receiver 8 Connectthe power supply cable for the Ravenlink Transmitter to the power supply 9 Turn on the power supply for the Ravenlink Transmitter and for the GPS Receiver The Power FLT LCD on the Ravenlink Receiver should glow green If it does not see Troubleshooting on page 9 Page 2 Template Version 2 03 Revision Date 26 06 2013 Forsberg Services Limited Company Registration No SC104949 Registered Office Forsberg Services Ltd 1 East Craibstone Street Aberdeen AB11 6YQ Ravenlink User manual A0500 09 0005 7 Troubleshooting Problem Solution Power Fault LED glows Fibre optic cable isnot connected red connected Fibreoptic cable isconnected but antennaisnot V1 00 No light Page 3 User supplied GPSreceiver isnot connected User supplied GPSreceiver isnot providing sufficient DC biasto power the Ravenlink Receiver Template Version 2 03 Revision Date 26 06 2013 Forsberg Services Limited Company Registration No SC104949 Registered Office Forsberg Services Ltd 1 East Craibstone Street Aberdeen AB11 6YQ 8 Specifications 8 1 RVL 1 Transmitter Frequency Ravenlink User manual A0500 09 0005 V1 00 GPS L1 L2 L5 L Band 800MHz 1800MHz Termination 50Q Power Power Requirements 12V 24V ACor DC Power Consumption 60mA
10. llation of the GPS antenna and the Ravenlink Transmitter we recommend you use a GPS inline amplifier on the antenna output Recommended LA 21 L1L2 T if the antenna output and cable connectors are TNC If the connectors are not TNC contact your Forsberg Services Sales Representative or visit www starlinkdgps com for details The power supply you use to power the Ravenlink Transmitter must be the correct type for the environment you install it in For example the power supply must be rated for outdoor use if it is mounted outside 5 2 Mounting the Receiver Mount the receiver as follows e The Ravenlink Receiver must be mounted indoors The receiver is not weather resistant e The receiver is powered by the GPS receiver Power Requirement 5V 12V DC Antenna TNC connector 50 ohm coax cable maximum 100 feet 30m Ravenlink Transmitter ST connector GPS Receiver Fiber optic cable r maximum 5000 Ravenlink feet 1524m Receiver 50 ohm coax cable maximum 50 feet 15m BNC Connector Page 9 Template Version 2 03 Revision Date 26 06 2013 Forsberg Services Limited Company Registration No SC 104949 Registered Office Forsberg Services Ltd 1 East Craibstone Street Aberdeen AB11 6YQ Ravenlink User manual A0500 09 0005 V1 00 6 Connecting the Ravenlink system 1 Connectone end of a coaxial antenna cable not included to the GPS antenna If the total cable length is greater than
11. s ERM Wideband transmission systems e EN 301 489 17 Electromagnetic Compatibility and Radio Spectrum Matters ERM Special conditions for 2 4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment Laser Safety CLASS 1 LASER PRODUCTM Thisdevice uses a class 1 laser A class 1 laser is safe under all conditions of normal use Page 6 Template Version 2 03 Revision Date 26 06 2013 Forsberg Services Limited Company Registration No SC104949 Registered Office Forsberg Services Ltd 1 East Craibstone Street Aberdeen AB11 6YQ
12. ter eoe acera SE Re tee eu pe EEE Ran ER SURREY egeveesesataveds e MR IA SUR Se Ee ER REN 4 8 2 EM 3u Ji E R EE ia 5 9 Legal ure err 6 Page iii Template Version 2 03 Revision Date 26 06 2013 Forsberg Services Limited Company Registration No SC104949 Registered Office Forsberg Services Ltd 1 East Craibstone Street Aberdeen AB11 6YQ Ravenlink User manual A0500 09 0005 V1 00 1 Safety Information e Before installation and use please read and follow all instructions e Keep these instructions for future reference e Install in accordance with the manufacturers instructions e Protect cables from being walked on or pinched e Refer all servicing to qualified service personnel e The Ravenlink receiver is not constructed to be mounted outdoors Do not expose the receiver directly to water or extreme temperatures e Donotopen the transmitter or receiver There are no user serviceable components inside e Opening of the transmitter or receiver by unauthorized personnel will void the manufacturers warranty Page 4 Template Version 2 03 Revision Date 26 06 2013 Forsberg Services Limited Company Registration No SC104949 Registered Office Forsberg Services Ltd 1 East Craibstone Street Aberdeen AB11 6YQ Ravenlink User manual A0500 09 0005 V1 00 2 Package contents EN INDUSTRIES x 516059 E1007740 FIBER LINK TRANSMITTER INPUT POWER 12 24 AC DIMA 10586901 CLASS ILASERPRODUCT PER 1EC 60825 1 2007 AND 21CFR
Download Pdf Manuals
Related Search