GS026 Radio Anemometer
Contents
1. CE GLCXXX 02 GS001 CE GS001 ATEX CE GS002 CE GS002 ATEX CE GS007 XX CE GS009 CE Anti Two Block GS005 CE GS005 ATEX CE GS050 CE GS050 ATEX CE GS075 CE GS085 Angle sensors GS010 XX CE GS010 XX ATEX CE GS011 XX CE GS011 XX ATEX CE GS012 CE GS030 CE GS030 10 Wind speed sensors GS020 CE GS020 ATEX CE GS026 Pressure sensors PT00120 XXX PT00130 XXX Gateways GS2XX XX CE Displays GS320 CE GS375 CE GS550 XX GS550 CE GS550 ATEX CE GS550 03 CE 65550 AX CE GS820 CE GS820 KXX CE to which this declaration refers conform to the relevant standards or other standardising documents Safety IEC 61010 1 2 ed 2001 EN 61010 1 2 ed 2001 Wireless EN 300 220 3 V1 1 1 2000 09 EMC EN 301 489 3 V1 4 1 2002 08 Qu bec June 21 2013 Eric Beaulieu Technologies Manager GM026 ENG rev_20130620 www loadsystems com PLSI 9 LSI Product Limited Warranty IN EFFECT APRIL 1 2013 LIMITED WARRANTY LOAD SYSTEMS INTERNATIONAL INC hereafter LSI warrants its products the Products will be free from defects in materials and workmanship for a period as determined by the product family as indicated below the Warranty Period Warranty Duration Product Family GC Series Load Cells GD Series Line Riders GP Series Load Pins GS001 GS002 GS003 GS004 GS005 GS007 GS010 GS011 GS012 GS020 GS030 GS031 24 months GS035 GS050 GS075 GS101 GS106 GS110 GS1122. the transport or the moving of the Product e Damages caused by accidents abuse misuse a force majeure described as events outside a LSI s or any Product user s control including war riot strikes embargoes or external cause e lt Any cost damage or expenses for field labor or any other expenses related to or arising from the replacement of defective parts e Products used for pile driving wire rope activated clamshell or dragline applications If purchaser uses the Products for pile driving wire rope activated clamshell or dragline application the Limited Warranty will be deemed to have been violated for abuse e Any costs associated with providing LSI with data logging equipment LIMITATION OF LIABILITY To the maximum extent permitted by applicable law in no event will LSI be liable to the purchaser or any third party for any indirect special consequential incidental or exemplary damages whatsoever including but not limited to loss of revenue or profit lost or damaged data business interruption or any other pecuniary loss whether based on contract tort or other causes of action even if LSI has been advised of the possibility of such damages In any event the total liability of LSI arising from any cause of action or claim whatsoever whether 1 in contract 2 in tort including negligence whether sole joint contributory concurrent or otherwise but not including intentional reckless or wanton tort 3 under stric
3. 0 www loadsystems com LSI 6 Replacement parts PD058 A Windcup Set Replacement PA122 Wind Speed Sensor Pivoting support Replacement TB021 Battery Lithium D Size 7 FCC and IC Instructions to the User This equipment has been tested and found to comply with the limits for a class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radiofrequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help In order to maintain compliance with FCC regulations shielded cables must be used with this GM026_ENG rev_20130620 LSI equipment Operation with no
4. GS220 GS221 GS222 GS224 GS550 GS820 LP Series Load Pins LS051 LS055 PT00100 GS026 GS085 GS320 GS375 Unless otherwise specified the default Warranty Period for the Products is 12 months after delivery of such product Please consult LSI for any Product that is not listed in the above chart for further details The Warranty Period commences after delivery of such Products to the user as evidenced on a LSI document subject to installation and use in accordance with specifications described in the LSI Installer and User s Manual as amended from time to time LSI technical materials and any related writings published by LSI with respect with such Products and any applicable industry standards During the Warranty Period LSI or its designated service representative shall repair or at its option replace any Product that is confirmed to be defective by LSI in its sole discretion in accordance with the Limited Warranty Services Procedures described below WARRANTY SERVICES PROCEDURES In order to benefit from this Limited Warranty the purchaser must notify LSI s customer service or LSI s authorized distributor or representative originally responsible for the sale of the Products within 10 days of the occurrence of a suspected defect in materials or workmanship and in any case prior to the expiry of the Warranty Period Timely notification will permit the purchaser to obtain a Return Authorization Number which will indicate ret
5. PLSI WIRELESS TECHNOLOGY amp CRANE INSTRUMENTATION DIVISIONS GS026 Radio Anemometer Installer and user guide N N A WARNING Carefully read and understand this manual and the receiving unit User s manual before proceeding IMPORTANT Refer to the GS320 GS550 GS820 Display amp GS Series Sensors Installer and User s Manual for complete information about installation operation maintenance certification and warranty GMO026 ENG _rev_20130620 www loadsystems com PLSI BEFORE PROCEEDING Read and understand the following For your safety and that of the people that come into contact with LSI products understand the significance of the instructions included in this guide respect all laws and regulations and comply with applicable standards Pay particular attention to text boxes and the following words WARNING Warning this denotes an instruction that if not complied with may lead to serious injury or death IMPORTANT Important this denotes an instruction that if not complied with may lead to product performance issues WARNING Installation must be made in compliance with LS instructions and using LS supplied components only Failure to install all parts or replacing parts or components with parts or components not supplied by LS may lead to system failure serious injury or death Table of contents Te OWE IVC IW eese a E E EAE 3 2 COG Oera E E ere
6. etermining if the Limited Warranty coverage is applicable that LSI receive the data logging equipment used with the Products and that LSI be authorized to retrieve all information from such data logging equipment in order to among others ensure that the written instructions and applicable standards including safety margins were respected and not exceeded during Product use Failure by the owner or user of the Product to supply such information shall be deemed a material default of the terms and conditions of this Limited Warranty and shall be irrevocably construed as GM026_ENG_rev_20130620 www loadsystems com 7 PLSI evidence that the Product was misused or abused Consequently LSI shall irrevocably be relieved of any obligations to compensate the user or owner of the Product for any and all damages resulting from Product failures when data logging equipment and access to its content cannot be freely and readily provided unhampered to LSI LSI will pay ground freight transportation costs of replacement or repaired parts or Products to the destination in the countries in which it maintains a service center currently Canada continental United States of America United Kingdom Australia and the United Arab Emirates the Territory LSI will not pay any transportation costs of replacement or repaired parts to a destination outside of the Territory Shipping and handling costs to locations outside the Territory shall be the responsibility o
7. f and borne by Purchaser or Owner of the Product prior to any shipment by LSI Contact LSI to obtain a Return Authorization Number and the address to ship parts EXCLUSION OF OTHER WARRANTIES THE ABOVE WARRANTY IS THE SOLE WARRANTY APPLICABLE AND THERE ARE NO EXPRESS LEGAL OR IMPLIED WARRANTIES OR CONDITIONS IN RELATION TO ANY PRODUCTS INCLUDING ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY NON INFRINGEMENT OR FITNESS FOR A PARTICULAR PURPOSE AND THOSE OTHERWISE ARISING BY STATUTE OR OTHERWISE IN LAW OR FROM A COURSE OF DEALING OR USAGE OF TRADE WHICH ARE EXPRESSLY DISCLAIMED NO ORAL OR WRITTEN INFORMATION OR ADVICE GIVEN BY LSI OR ITS EMPLOYEES OR REPRESENTATIVES SHALL CREATE A WARRANTY OR CONDITION OR IN ANY WAY INCREASE THE SCOPE OF LSI S OBLIGATIONS LSI DOES NOT WARRANT THAT THE BUSINESS RESULTS OBTAINED FROM THE USE OF THE PRODUCTS WILL BE APPROPRIATE OR ADEQUATE FOR THE PURCHASER EXCLUSION This Limited Warranty does not cover and shall not apply to e Any Product that is misused or abused including being altered modified or repaired not in accordance with LSI written instructions or authorizations or used not in compliance with LSI s instructions and or industry standards and practices e Any incidental costs or expense such as shipping charges to LSI or an designated service representative as well as the technician out of pocket expenses including traveling lodging and meal expenses if any e The damages caused during
8. he United States of America or anywhere else excluding Canada ENTIRE AGREEMENT This document contains the entire agreement of the parties regarding the subject matter of the Product Warranty and supersedes all previous communications representations understandings and agreements either oral or written between you and LSI VIENNA CONVENTION EXCLUDED The United Nations Convention on Contracts for the International Sale of Goods does not apply to this Limited Warranty LSI Contact Information Technical support LSI Technical Support is available 24 hours a day 7 days a week from our Houston and Dubai locations Please direct all technical support questions to either of these locations or contact us via email techsupport loadsystems com USA CANADA UK DUBAI UAE AUSTRALIA 9633 Zaka Road 4495 Wilfrid Hamel Blvd Suite 110 Unit 5 Silverfield House Q3 171 SAIF Zone 32 West Thebarton Road Houston TX 77064 Quebec City QC Canada G1P 2J7 Claymore Drive Aberdeen Energy Park PO Box 7976 Thebarton South Australia 5031 Tel 1 281 664 1330 Tel 1 418 650 2330 Bridge of Don Aberdeen AB23 8GD Sharjah UAE Tel 61 0 8 8238 3500 Fax 1 281 664 1390 Fax 1 418 650 3340 Scotland UK Tel 971 6 557 8314 Fax 61 0 8 8352 1684 sales loadsystems com sales loadsystems com Tel 44 0 1224 392900 Fax 971 6 557 8315 sales lsirobway com au Fax 44 0 1224 392920 lsifzc emirates net ae uksales loadsystems com GMO026 ENG _rev_20130620 w
9. n approved equipment or unshielded cables is likely to result in interference to radio and TV reception This device complies with Industry Canada licence exempt RSS standard s Operation is subject to the following two conditions 1 this device may not cause interference and 2 this device must accept any interference including interference that may cause undesired operation of the device This Class A digital apparatus complies with Canadian ICES 003 IMPORTANT Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment FCC ID QVBGS002 IC 7076A ICGS002 RF Exposure Warning This product complies with FCC IC radiation exposure limits set forth for an uncontrolled environment To comply with RF exposure requirements the unit must be installed and operated with 20 cm 8 in or more between the product and your body This product may not be collocated or operated in conjunction with any other antenna or transmitter www loadsystems com 5 LSI 8 CE Declaration of conformity LSI LOAD SYSTEMS INTERNATIONAL INC Declaration of Conformity According to EN 45014 Manufacturer s Name Load Systems International Inc Manufacturer s Address Canada 4495 Blvd Wilfrid Hamel Suite 110 Qu bec OC Canada G1P 2J7 Declare under our own responsibility that the products Load sensors GCXXX CE GCXXX ATEX
10. ree eee re eee 3 Be E e l o IY E E A E AEE A E N E T 3 Be OPE OM e a E E E O 4 z PENE PECENE 9 a R 4 Ce RPAC EEN a E E ee ee ee 4 7 FCC and IC Instructions to the USET ccccccccccsssssssseececceceaeesseeecccesssaeasseececeeesseeasseeeseeeessagaasess 5 8 CE Declaration of conformity sinsixcewccsdsccinedistecosnidcessqasdaccsnansecasnniceganis ieaesanndotaanatdeaaanateeadantadaaanieans 6 9 LSI Product Limited Warranty IN EFFECT APRIL 1 2013 ccecceccecessesseccessscescescesseeeeseeeaceaees 7 GMO026 ENG rev_20130620 www loadsystems com 2 1 Overview The GS026 is a battery powered radio anemometer The wind speed is calculated from pulses of magnets inserted in the rotor No adjustment is necessary the anemometer never needs to be calibrated The expected battery life with a lithium battery is about 4 years Both the battery and rotor can be serviced in the field without tools 2 Location For optimal radio communication mount the anemometer on the same side of the boom as the receiver unit perpendicular to the boom and at the highest point possible ono The wind speed sensor must pivot freely on the mounting mast at all boom angles The wind cups must be fully exposed to the wind and spin freely at all boom angles Anemometer There should be a clear and unobstructed line of sight between the anemometer sensor and the cabin mounted display unit GM026_ENG rev_ 20130620 LSI 3 In
11. stallation Weld or screw the mast to the boom at the selected position Note Angle iron can be used to extend the reach of the mast to clear the boom tip IMPORTANT Do not weld in proximity to LSI sensor transmitters The base of the mast can be used when retrofitting the GS026 on a previously installed GS020 anemometer rod Make sure the base of the mast is fully tightened and add the cotter pin at the rod tip GS020 Rod L Cotter pin Once the mast is secured in place the radio anemometer can be inserted on the pivot and secured in place by the washer and hairpin www loadsystems com 3 4 Operation The radio anemometer is supplied with a battery and is ready for installation It does not need to be calibrated or adjusted Refer to the GS320 GS550 GS820 manual for instructions on how to add the anemometer to the sensor list of the display 5 Battery replacement After a period of about 4 years of normal use the battery may need to be replaced To ensure the same battery life as the original battery replace with 3 6V lithium D cell Alternatively for about 15 months of battery life replace with 1 5V alkaline D cell To remove the battery compartment cover rotate turn counterclockwise To close the battery compartment cover turn turn clockwise IMPORTANT The positive battery contact must point to the battery compartment cover see picture below GM026_ENG rev_ 2013062
12. t liability 4 under any environmental or antipollution law or regulation 5 connected with any toxic or hazardous substance or constituent 6 arising out of any representation or instruction or under any warranty 7 or otherwise arising out of connected with or resulting from the design manufacture sale resale delivery repair replacement or use of Products or the furnishing of any service shall in no event exceed the price allocable to and paid to LSI for the individual unit of Products or service or part thereof which gives rise to the cause of action or claim GMO026 ENG _rev_20130620 www loadsystems com 8 SOME STATES OR JURISDICTIONS DO NOT ALLOW THE LIMITATION OR EXCLUSION OF LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU RECOMMENDED PRACTICES LSI recommends careful consideration of the following factors when specifying and installing the Products Before installing a Product the Installation Operation and Maintenance instructions provided with the unit must be read and understood and complied with CHOICE OF LAW This Limited Warranty shall be governed by and construed in accordance with the laws of the Province of Quebec Canada for products sold by LSI in Quebec the laws of the Province of Ontario Canada for products sold by LSI in Ontario and anywhere else in Canada and the laws of the State of New York for products sold by LSI anywhere in t
13. urn procedures and terms and conditions of such returns A proof of purchase of the Product such as an invoice or a receipt certifying the validity of the Warranty must be presented in order to obtain Limited Warranty coverage In any event even if a Return Authorization Number is provided to purchaser LSI reserves the right to inspect the damaged Product or part before its final decision to repair or replace the defective Product or part The Product or part shall be returned to LSI or its designated service representative accompanied by the Return Authorization Number with prepaid shipping charges The purchaser must insure the shipment or accept the risk of loss or damage during the shipment Purchaser shall also pay any tariff or duty applicable to the return of the defective part or Product LSI will at its option repair or replace the Product or part returned to LSI or to its designated service representative LSI owns all parts or Products replaced repaired or removed from a repaired Product If LSI repairs a Product the Product Warranty coverage Period is not extended and the Limited Warranty shall expire as if uninterrupted at the end of the last month of the original Warranty Period from shipping from LSI If LSI replaces a Product the replaced Product is warranted for the remainder of the original term or sixty consecutive 60 days whichever is longer LSI reserves the right to require from the user or owner of the Products prior to d
14. ww loadsystems com 9
Download Pdf Manuals
Related Search