USER MANUAL
Contents
1. USER MANUAL D M XW 2 4 WIRELESS DMX PRO 2 4GHZ SIRS E CAUTION Keep this device away from rain and moisture Unplug main lead before opening the housing For your own safety please read user manual carefully before your initial start up Every person involved with the installation operation and maintenance of this device has to be qualified follow manual instructions consider this manual to be part of the total product keep this manual for the entire service life of the product pass this manual to future owner or user of the product download the latest version of the user manual from the internet 1 INTRODUCTION Thank you for choosing DMXW2 4 product If you follow the instruction given in this manual we are sure that you will enjoy this device for a long period of time Unpack your DMXW2 4 2 SAFETY INSTRUCTIONS This device has left our premises in absolutely perfect condition In order to maintain this condition and to ensure a safe operation it is absolutely necessary for the user to follow the safety instructions and warning notes written in this user manual Important Damages caused by the disregard of this user manual are not subject to warranty The dealer will not accept liability for any resulting defects or problems Please make sure that there are no obvious transport damages If you notice any damages on the power unit or chassis do not take the device into operation and immediately2. ated or stockpiled in surroundings where splash water rain moisture or fog may harm the device Moisture or very high humidity can reduce the insulation and lead to mortal electrical shocks When using smoke machines make sure that the device is never exposed to the direct smoke jet and is installed in a distance of 0 5 meters between smoke machine and device The room must only be saturated with an amount of smoke that the visibility will always be more than 10 meters The ambient temperature must always be between 5 C and 45 C Keep away from direct insulation particularly in cars and heaters The relative humidity must not exceed 50 with an ambient temperature of 45 C This device must only be operated in an altitude between 20 and 1000 m over NN Never use the device during thunderstorms Over voltage could destroy the device Always disconnect the device during thunderstorms Operate the device only after having familiarized with its functions Do not permit operation by persons not qualified for operating the device Most damages are the result of unprofessional operation Please use the original packaging if the device is to be transported Please consider that unauthorized modifications on the device are forbidden due to safety reasons Never remove the serial barcode from the device as this would make the guarantee void If this device will be operated in any way different to the one described in this manual th
3. consult your local dealer Always plug in the power unit least Keep away from heaters and other heating sources If the device has been exposed to drastic temperature fluctuation e g after transportation do not switch it on immediately The arising condensation water might damage your device Leave the device switched off until it has reached room temperature This device falls under protection class HI The device always has to be operated with an appropriate transformer Always disconnect from the mains when the device is not in use or before cleaning it Please note that damages caused by manual modifications on the device or unauthorized operation by unqualified persons are not subject to warranty Keep away children and amateurs from the device There are no serviceable parts inside the device Maintenance and service operations are only to be carried out by authorized dealers 3 OPERATING DETERMINATIONS This device is a wireless DMX Transmitter for transmitting DMX data without cables This product is allowed to be operated with a direct voltage of DC 9 V 1 A and was designed for indoor use only Do not shake the device Avoid brute force when installing or operating the device When choosing the installation spot please make sure that the device is not exposed to extreme heat moisture or dust There should not be any cables lying around You endanger your own and the safety of others This device must never be oper
4. e product may suffer damages and the guarantee becomes void Furthermore any other operation may lead to dangers like short circuit burns electric shock etc 4 Description A Features Transmitter or Receiver for wireless data transmission e DMXW2 4 is interference free from other wireless devices in the 2 45 GHz band such as W LAN e DMXW2 4 uses adaptive FHSS Frequency Hopping Spread Spectrum and TDMA Time Division Multiple Access e One DMX2 4 supports a single DMX 512 universe with 512 DMX channels e Larger systems can easily be adapted to support up to 8 200 DMX channels 16 DMX 512 universes e Upto 8 192 receivers can be used in a DMXW2 4 system e Frequency channel 250 B Overview Overview on the control elements 99 o hd DISPL TY i frequency display DMX signal detect Status LED Frequency selectors Power supply DMX IN OUT DMX IN socket N N DMx out socket Sl wal Bi Status switch 2 Sig A Co N O I gt UNI 3 Signal SETUP A Installation Install the device on a place surface Connect the connection cable of the power unit with the DC IN socket Plug the power unit into your outlet With the POWER switch you can switch the device on and off B DMX 512 connection NOTE The wires must not come into contact with each other otherwise the fixtures will not work at all or will not work properly Only use a stereo shielded cable and 3 pin XLR plugs and c
5. onnectors in order to connect the controller with the wireless transmitter or one fixture with another Occupation of the XLR connection XLR mounting socket and plug Ground Signal Signal If you are using controllers with this occupation you can connect the DMX output of the controller directly with the DMX input of the first fixture in the DMX chain If you wish to connect DMX controllers with other XLR outputs you need to use adapter cables Build a Serial DMX chain Connect the DMX output of the first fixture in the DMX chain with the DMX input of the next fixture Always connect one output with the input of the next fixture until all fixtures are connected Operation After you connected the device to the mains the DMXW2 4 is ready to use Wireless DMX For wireless data transmission you need a DMX controller a wireless transmitter and a wireless receiver or devices with wireless receiver respectively Meaning of the LEDs and their colours Red permanently lit Transmitter mode Green permanently lit Receive mode every free wireless receiver is logged into the wireless Transmitter Wireless receiver Transmitter DMX Signal Pilot DMX Signal Pilot flashes the DMX signal is present and transmitted DMX Signal Pilot no flashes no DMX signal the radio link is being held Installation of a transmitter DMX system On the conjunction DMX controller connect power supply establish Status Switch on the Transmit
6. position the Status LED grows for the red at this time bright the DMX Signal Pilot Flash If there is DMX signal Installation of a Receive DMX system On the conjunction DMX Equipment connect power supply establish Status Switch on the Receive position the Status LED grows for the green at this time bright the DMX Signal Pilot Flash If there is DMX signal The channel that takes place a machine and receives a machine want to establish in the same of channel and then can work normally Please note At same receive there is more than a set in the scope shoot a machine they can t establish in the same of channel otherwise would mutual interference CLEANING AND MAINTENANCE Disconnect from mains before starting maintenance operation DANGER TO LIFE We recommend a frequent cleaning of the device Please use a soft lint free and moistened cloth Never use alcohol or solvents There are no serviceable parts inside the device Maintenance and service operations are only to be carried out by authorized dealers Should you need any spare parts please use genuine parts Should you have further questions please contact your dealer TECHNICAL SPECIFICATIONS Power supply 100 240 V AC 50 60 Hz 9 V DC MINS500M A power unit included in the delivery Power consumption 3 W Number of control channels 512 1 DMX 512 universe Max number of receivers 8 190 DMX 512 input 3 pin XLR plug Frequency 2 450 GHz Coverage 1000 m wi
7. th line of sight Dimensions L x W x H 135 x 120 x 42 mm Weight 1 kg Please Note Manual information is subject to change without prior notice Contact us SIRS Electronics Inc Phone No 956 522 2006 Fax No 512 493 0484 email info sirs e com Visit our eStore wWwww sirs e com
Download Pdf Manuals
Related Search