STAND MASTER USER MANUAL
Contents
1. eee Show Control 969 WWW PROLIGHT CO UK STAND MASTER ORDER CODE 12 USER MANUAL WARNING FOR YOUR OWN SAFETY PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START UP CAUTION Keep this equipment away from rain moisture and liquids SAFETY INSTRUCTIONS Every person involved with the installation operation amp maintenance of this equipment should Be competent Follow the instructions of this manual CAUTION TAKE CARE USING THIS EQUIPMENT HIGH VOLTAGE RISK OF ELECTRIC SHOCK Before your initial start up please make sure that there is no damage caused during transportation Should there be any consult your dealer and do not use the equipment To maintain the equipment in good working condition and to ensure a safe operation it is necessary for the user to follow the safety instructions and warning notes written in this manual Please note that damages caused by user modifications to this equipment are not subject to warranty IMPORTANT The manufacturer will not accept liability for any resulting damages caused by the non observance of this manual or any unauthorised modification to the equipment Never let the power cable come into contact with other cables Handle the power cable and all mains voltage connections with particular caution Never remove warning or informative labels from the equipment Do not open2. Function Selector set to AUTORUN In this mode use the sliders as above to set the output and the internal chase patterns will operate you can adjust the speed using the SPEED SENSITIVITY control STAND MASTER MAINTENENCE Maintenance Always disconnect the electric mains power supply before cleaning or servicing Damages caused by non observance are not subject to warranty The Stand Master requires almost no maintenance However you should keep the unit clean Wipe the cover with a damp cloth Do not immerse in liquid Do not use alcohol or solvents Make sure the equipment is fully dry before re connecting to the mains Product Specification Model Transcension Stand Master Voltage AC 240V 50Hz CE Max Load Per Channel 1000W Total Load 2400W e Input Fuse 250V Fuse Per output Channel F5A 250V 6x30mm Dimensions 270 190 x 116mm L x W x e Weight 2 7kgs
3. the equipment and do not modify the equipment Do not connect this equipment to a dimmer pack Do not switch the equipment on and off in short intervals as this will reduce the system s life e Only use the equipment indoors e Do not expose to flammable sources liquids or gases e Always disconnect the power from the mains when equipment is not use or before cleaning Only handle the power cable by the plug Never pull out the plug by pulling the power cable Make sure that the available voltage is between 220v 240v e Make sure that the power cable is never crimped or damaged Check the equipment and the power cable periodically e If the equipment is dropped or damaged disconnect the mains power supply immediately Have a qualified engineer inspect the equipment before operating again e If the equipment has been exposed to drastic temperature fluctuation e g after transportation do not switch it on immediately The arising condensation might damage the equipment Leave the equipment switched off until it has reached room temperature e f your product fails to function correctly discontinue use immediately Pack the unit securely preferably in the original packing material and return it to your Prolight dealer for service e Only use fuses of same type and rating e Repairs servicing and power connection must only be carried out by a qualified technician THIS UNIT CONTAINS NO USER SERVICEABLE PARTS e WARRAN
4. TY One year from date of purchase OPERATING DETERMINATIONS If this equipment is operated in any other way than those described in this manual the product may suffer damage and the warranty becomes void Incorrect operation may lead to danger e g short circuit burns electric shocks lamp failure etc Do not endanger your own safety and the safety of others Incorrect installation or use can cause serious damage to people and property STAND MASTER DESCRIPTION Description of the equipment Features 4 channel dimmer complete with manual flash override 4 channel sequencer Built in microphone for sound activation FRONT VIEW Fig 1 1 Dimmer Faders 1 4 2 Flash buttons 1 4 3 Channel activation indicator 1 4 4 Programme Change Switch 5 Speed Sensitivity Control STAND MASTER BACK VIEW Back View Fig 2 6 Main Fuse F1A 250V 7 4x IEC Sockets 8 4x Fuse 250v 6 x 30mm 9 ON OFF Switch 10 AC Input 11 Built in microphone Functions 1 Programme Selector set to FLOOD In this mode the sliders can be set to the desired output for each channel also the FLASH buttons will operate to take the channel to full output X Function Selector set to AUDIO In this mode the sliders still set the output level and the internal chase pattern will be triggered by the built in microphone you can adjust the sensitivity with the SPEED SENSITIVITY control
Download Pdf Manuals
Related Search