Home

Vox-Net user manual v4

1. 2 RX RX 3 3 TX ground 6 5 ground PORT 2 used by MODAN or MODBUS protocol used also to connect the matrix to an Evacboards port 2 IDA side port PC VNB side TX 9 2 RX RX 1 3 TX ground 6 5 ground PORT 3 used to connect the matrix to IDA4SU port 3 IDA side IDA SU side TX 4 4 RX RX 5 5 TX Matrix configuration In the main window of Vox net right click in a zone button of the matrix Zone 1 fone 1 mean Zone 3 Zone 4 Zone 4 Doon Hame Matrix Logical one 1 LE Adm pa RE Qi aod gon o y FLEST lt The PCIDA4XM software is composed of three windows e Main for general settings Communication Appearance IDA updating date and time internal software Language e Settings for application settings site zones call stations messages Site Zones Call stations and messages Evacuation inputs Control inputs Sources OdB inputs Serial ports Fault inputs e Monitoring for the selection of signal which has to be routed to the monitoring loudspeaker 8 ohms Number of slaves The matrices capacity may be inc
2. u 8 Authorizations for Users Authorizations for Users 1 INST Add Delete AutoLog i Record message i Site parameters w Volume setting i Play message Ww Zone parameters Ww Music Setting wW Delete Message W Local music W Access i Priority message 2 Window W Microphone call wW Message scheduler i Maintenance w Message parameters MW History i Listen Message i Close i Yolume Source SP i Stop computer The user codes allow creating limited accesses to the application in function for example operators profiles By default there one user access its code is INST Until 10 different s codes can be created each with their specific access rights To select an existing user click on the drop down menu To understand what are meaning these restrictions please look the descript By clicking on Add a new user is created named User 2 for example Write his code in the box and ticks the functionalities who will be attributed to the user This code must be of 1 to 10 characters to the maximum There is not difference between capital and minuscule It can contain figures and other characters amp u 8 To delete an user code just click on the Delete button AutoLog If the function Autolog is ticked the software will be started by default in the user mode without requesting the access code to the user Only one of the user access can be set in Autolog
3. The music can come from an audio device connected to the network through a VNB or from a folder in the PC server External Music sources A music source is a client which have a priority set to 1 in the configuration window of Vox Net tab Clients from the server PC The device which provide the music CD player tuner etc is connected to the VNB which have a IP address Its audio quality depends only of the VNB setting can be MP3 or SPEEX pz Vox Net Configuration Setup Setup MICROPHONE IP SPEAKER IP PRIORITY EE 168 10 110 o 0 0 0 lo 0 0 0 1100 Call Options l server 192 _169 10 110 0 0 0 0 0 0 0 100 Call z client PMI 192 168 10 105 192_168 10 15 0 0 0 0 30 Call 3 Music player 0 0 0 0 192 _168 10 130 0 0 0 0 Music Internal Music sources These music sources refer to a folder which contains MP3 files The music database must be stored in the server Procedure Create a new folder in the Vox Net folder C Vox Net This folder must be named Music following by the client s number which will be attributed to him Copy the MP3 files in this folder as example C Vox Net Music3 After all those handling it is necessary to restart the software In this example the folder Music3 which contain MP3 is associated with the client 3 named music library 1 see configuration Vox Net folder Vox net configuration tab Clients J Ordinateur Vox Net Configuration ee Je
4. Mi Organiser 2 Affichages lg Graver Er Date de modificati Type Taille B hoii dae FH Configuration du syst me 02 11 2006 13 53 Raccourci 2 lam Gestion de l impression 02 11 2006 13 55 Raccourci E PRE LA Gestion de l ordinateur 24 04 2008 07 03 Raccourci 2 El Images GAISS Manager 03 11 2009 14 48 Raccourci 2 Autres ae Initiateur iSCSI 2 pee w Moniteur de fiabilreercepre F ure A eo E x BE Observateur d v nements 02 11 2006 13 54 Raccourci 2 Panneau de configuration EN N o BB Accueil Windows fag Outil Diagnostics de la m moire 02 11 2006 13 53 Raccourci 2 a EEE E EPER Ed Pare feu Windows avec fonctions avanc 24 04 2008 07 03 Raccourci 2 ib EOE cido E E Planificateur de t ches 02 11 2006 13 54 Raccourci 2 earch EE E Ets aj Services 24 04 2008 07 03 Raccourci 2 E a Sy Sources de donn es ODBC 02 11 2006 13 53 Raccourci 2 ab Strat gie de s curit locale 24 04 2008 07 04 Raccourci 2 a Comptes d utilisateurs la il AA A PE aa a a In the 1156 Manager open the default FTP site Right click on it and open proprieties Fichier Action Affichage Fen tre LS EEE Services Internet IS Description Identificateur tat Adresse IP Port Erreur a 99 EMMANUELPC ordinateur local Default FTP Site Arr t 1 Arr t Toutes valeurs 21 4 Le Sites FTP Default ETD Autorisations Parcourir D marrer Arr ter Suspendre Nouveau Toutes les t ches Nouvell
5. Commercial Chimel_com 40 Add Securty chime _secu 80 Informative Chime3_Inf 50 Delete The numbering of the chimes associated with a bank is defined by their order in this list In this example Chime1_com is the chime number 1 chime2_secu is the chime 2 and Chime3_Inf is the chime 3 The mp3 pre recorded files used as chime must be stored in the folder C Vox Net messages The user can also record a chime by using the messages window Ordinateur EL os C de Vox Net messages Chimel_com mp3 e chime _secu mp3 All the messages used as chimes are not accessible as messages The messages window does not display them The registers containing the parameters does not change Auto Parameters The user can store the auto parameters of the message by clicking on the button Auto parameters in the messages window Auto Parameters The parameters of the message will be stored in a file named with the name of the message and with an extension ini L blues mps blues mi This file contains only one row For example M1C1 0 1 2 With the following parameters destination priority chime bank destination MmCc m matrix number c code number zones priority O high 1 medium 2 low The real value is defined in the Audio window Menu Configuration Audio Audio Messages Priority chime Associate chime s number bank The bank number associated with the message Music Music sources
6. Define the audio quality as you want Click L4BBly new Settings to store the new setting RS232 VNB1 Select the tab Config and RS232 to open this page Set the parameters as follow Home Status Config System Contig Logic Audio RS2352 Intercom Decoder 1 Decoder 2 Encoder 1 Command Vox net Encoder 2 R5232 Settings Mode UDP Gateway Options M Fault if not connected IP port 12310 Destination Address 192 168 10 1150 Baud Rate 115200 bps Data Bits a stop Bits 1 Parity None Apply new settings Copyright 2008 Ateis International About Us The serial parameters Baud rate Data bit Stop bit and parity must match with the serial parameters in the other VNB 2 Notch the option Fault if not connected if you want the VNB displaying a fault when the RS232 port is unconnected For the RS232 protocol we want a continuous UDP streaming So under Mode select UDP Gateway Chose an IP port Here we chose 12310 Click LABBly new Settings to store the new setting Command VNB1 Select the tab Config and Command to open this page Home Status Config System Config Logic Audio R5232 Intercom Decoder 1 Decoder 2 Encoder 1 Encoder 2 Command Vox net TCP Command Interface Settings Mode OFF k TCF pot 1 Options Fault if not connected Apply new settings Copyright 2008 Ateis International About Us As the VNB is in stand alone mode it s not l
7. MR A a Client parameters Click on the button Add to create a new client and in accordance with the network organization fill in the following parameters Name The name of the client The client number is automatically set in order This name must be legible and clear because it will use for the default display Client IP The IP address of the PC used as client In dual mode backup server only one row have to be set here with the shared IP address of the servers see Configuration window Network Microphone IP The IP address of the PMIP or VNB and microphone if a microphone is associated with the client Speaker IP The IP address of the client loudspeaker PMIP or VNB if a loudspeaker is associated with the client M PMIP NB if you use a PMIP or a VNB this option must be notched That s means that the microphone and the speaker have the same IP address of the PMIP VNB wrote in the microphone IP box MAME CLIENT IP MICROPHONE IP PRIORITY PMIPD 192 168 10 161 192 168 10 161 100 Cal Options M PMIPA NB Setup Z PHIPD O O A Pan dela nears eon With the PMIP D the Client IP and the Microphone IP are the same because the PMIP D has its own GUI Priority The priority of the client calls The minimum is 1 used for music sources And from 2 to 100 for call sources Next to the priority level you can read Call or Music respectively if it s a call or music priority level As
8. Message scheduler Maintenance 4 Message parameters History 4 Listen Message Close xl Yolume Source SP Stop computer Mode Ok Server Dual Server Clientof 1921680100 A Cance Access In the main window of Vox net software click on the button k configuration Then select the tab Access This window able to control the user access rights with the Vox net software interface When Vox Net is started it request to enter an access code This will define the rights according to the user There is two user level administrator and user d and chose 45 Vox Net Configuration Administrator Access limited to 15 mnis 27779 Authonzations for Users 1 DEMOVN Add Delete M Autol og Record message i Site parameters Ww YWolume setting 4 4 Play message W Zone parameters i Music Setting x Delete Message W Local music W Access x Priority message W Window W Microphone call x Message scheduler i Maintenance x Message parameters i History x Listen Message i Close x Yolume Source 5P W Stop computer Mode For details please see the other chapter Configuration Window on Server Access Ok Serre Dual Serer Clientof 192 168 0 100 po Lancel Maintenance In the main window of Vox net software click on the button and chose configuration Then select the tab Maintenance Proa OC Access Restore YoxM
9. Tools Acces Martenernce Helivagik Setup au CLEHT F MICROPRHONE IP SPEAKEA PRIGRITY A O Options Client Z 1397 168 10 120 0 0 0 0 0 0 0 0 100 Call 3 Cliane 3 132 166 10 103 152 168 10 111 0 0 0 0 100 Call 4 CD playas 0 0 0 0 152 168 210 130 0 0 0 0 100 Call 5 Husic library 192 168 190 219 0 0 0 0 1 0 0 0 Music Client In the main window of Vox net software click on the button configuration Then select the tab Client Here is the framework of Vox net All the IP addresses are defined here in accordance with the network organization and chose The following elements must be understood as client e The server if it must be able to send messages e Every clients PC associated or not with its microphone and loudspeaker e Every music sources internal MP3 in a folder c Vox Net Musicx or external CD player tuner 4 YoxoNet Configuration PMIPYYNE Setup Setup MAME CLIENT IP MICROPHONE IP SPEAHER IP PRIORITY Panel PC 192 168 10 105 192 168 10 136 0 0 0 0 100 Call Options 168 10_5 0 0 0 0 0 0 0 0 100 Call 162 10 161 192 168 10 161 PHIF VNE 100 Call 3 Panel PC SE o loo O e a a TE 0 100 Call CREA NE REA ERENG ce Stream to 192416610265 Port 8011 Mode Ok Server Dual Server Client of AI Cana On the left of the client s name the check boxes activate or not any client
10. Server and matrices Modan protocol server gt matrix _E E gt Matrix 1 Station 1 matrix gt server Matrix 1 Station 1 gt E 16 15 14 13 12 11 09 08 07 060504030201 C The answer from the matrix contain the stats of each zones busy state and fault state Server and backup server Client protocol server gt backup server send ACT backup server gt server receive BKP Mode Backup Server Basically the Vox net software installed on each computer is the same On the window s bottom a box called Mode able to specify the using mode of the PC Mode f Server f Dual Server Client of Three mode are available select one of them depending of the computer s function e Server if the PC is a single server no backup to configure the client see Configuration window on a server e Dual server if two servers PC are used in dual mode the both must be set as dual server to configure the client see Configure Dual server mode to understand this mode see Mechanism Dual Mode e Client Of if the PC is a client of Vox net to configure the client see Configuration window on a client Computers with Vox net software Server PC Backup Server PC Mode Dual Server Mode Dual Server cn Mode Client network Configuration Window on the Server In the Vox Net software click on the Menu button and chose configuration JB Voxt Net Configuration E ts Mater
11. cong 3 notes 50 1 matrix number code number priority client number In this example the message blues wait to be diffuse in the matrix 1 code of zone 1 and 2 with the chime Gong 3 notes Its priority is 50 For each matrix the destination is displayed like this Matrix number 1 Code of zones 1 and 2 For example if the message has to be played in matrix 1 code 3 and in matrix 4 code 1 and 2 the destination is displayed like this M1C3 M4C1 2 Faults Report Box The fault box is on the top right of the main Vox net window This box allows the user to know in real time all the reportable fault of the Vox net network If all is working fine the fault box is white and display No fault reported Mo fault reported If something is wrong the fault box becomes yellow and display the faults Name Name The name of the client or matrix from which comes the issue Type For the server the issue can be SERVER unavailable Displayed in the Clients when the server is unavailable Network unavailable The server is not connected to the ethernet network For each client the issue can be ClientName CLIENT absent The client is not connected For each matrix the issue can be MatrixName Matrix Absent The matrix MatrixName is not connected MatrixName Immediate fault There is an immediate fault on the matrix MatrixName MatrixName Deferred fault There is an deferred fault on the matrix MatrixName For each Decode
12. Access limited This parameter limits in time the access to the Vox net software when no action is done It can be set between 1 to 30 minutes This counter is reset as soon as any action is done by the user keyboard or mouse action Access limited to 15 mnis El l gt This parameter can be inhibited by set the cursor in the minimum the name of the box will appear as Unlimited access Unlimited access ET D Description of access rights RIGHTS DESCRIPTION CONSEQUENCES IF NOT SELECTED Record Allow the user to record This button in the message window is not accessible Message new messages New Record Play message Allow the user to diffuse This button in the message window is not accessible messages Play Now Delete Allow the user to delete This button in the message window is not accessible message messages Delete Priority Allow the user to chose the This button in the message window is not accessible Message message priority level when he plays one Medium Messages Allow the user to create or This button in the message window is not accessible scheduler modify the messages TT scheduler Message Allow the user to save all the This button in the message window is not accessible parameters selected parameters of Auto message Parameters In order to use them again for every diffusion of the same message Listen message Volume Source SP Site parameters Zone pa
13. Modbus amp OPC There is two way to control Vox net from an external third party equipment Modbus and OPC Modbus Please find the Modbus table in the attached document In the window Menu configuration Tools set the third party parameters Supervisory OPC and Modbus OPC definition file Address 1 Any RTU 9600 Eds RTU ASCII le Even parity TCPAIP 502 8 bits 1 stop bit Monitor 4ny Address By default the Modbus address of the server is 1 Type Select which protocol the third party use It can be RTU or ASCII if you use the RS232 serial port of the server Or it can be TCP IP 502 if you use a third party equipment which is linked to the server through a ethernet The TCP port is fixed to 502 Serial parameters If you have selected the protocol RTU or ASCII you have to set all these parameters in accordance with the third party equipment serial port setting COM 1 Select in the first raw the used communication port of the E server Monitor Here you can select which client speaker will be use to hear the listening Modbus request Information 1 The listening audio level on a client cannot be controlled by Modbus Command Execution and Acknowledge Write O in command register 5FFF Write O in Execution register 0009 Write the command in the command register 5FFF Read Execution register 0009 until it becomes 0 Read NACK register 6000 Quick
14. PMIP D Presentation PMIP D With Vox net GUI a The PMIP series are microphones and speaker desk specially developed for the Vox net system They contain integrated analogical coder and decoder interfaces toward IP used to pass on audio signals through the network Network The PMIP have their own IP address with subnet mask They are linked to the network by a RJ45 cable The PMIP are configurable in a web interface reachable by its IP address Audio The PMIP series provide only one audio channel which is used by the integrated microphone and one other audio channel which is used by the integrated loudspeaker To be adaptable with the network capacities two encoding format can be chose Speex or MP3 with several audio quality level Control The encoder and decoder part of the PMIP is leaded by the server by using the command protocol The PMIP D communicates also with the server by using the CLIENT protocol Intercom The PMIP VNB series provide also the intercom function It able make a direct call between two devices In this usage the Vox net server does not interfere The both devices communicate directly together In this example we won t show the intercom part Connectors Headset T TE O TL N can Power supply RelayOut1 amp 2 Logic In RS232 VNB Presentation Please refer to the Quick start Complete procedure VNB Presentation PMIP D Configuration The configuration of the PMIP VN
15. Parami M1C1 Open the configuration file ini Modify this text document as below to create your graphical user interface For the whole configuration please see GUI configuration In our example we just need to have four buttons one for each zone in the matrix We also have to set one key for each pre recorded message The GUI should contain at least these following raw Change the key numbering as you want Paging Page1 Func1 ZONESEL Label1 Matrix 1 zone 1 Param1 M1C1 Func2 ZONESEL Label2 Matrix 1 zone 2 Param2 M1C2 Func3 ZONESEL Label3 Matrix 1 zone 3 Param3 M1C3 Func4 ZONESEL Label4 Matrix 1 zone 4 Param4 M1C4 Messages Page2 Func1 MSGSEL Labell Message1Name Param1 blues Func2 MSGSEL Label2 Message2Name Param2 blues Func13 MSGPLAY Label13 PLAY Func14 MSGSTOP Label14 STOP Func15 LISTENMSG Label15 LISTEN MSG Func16 LISTENSTOP Label16 LISTEN STOP Save your GUI file and close this document When your GUI is done go back to the PMIP D web page the click on GUI configuration import Parcourir and select your new GUI configuration from your PC Then Click on LMBOr this UNI Te import and activate the selected GUI configuration in your PMIP D VNB Configuration Please refer to the Quick start Complete procedure VNB Configuration Matrix Configuration Please refer to the Quick start Complete procedure Matrix Configuration Intercom between Te
16. Settings Auto Reset Selection This function will automatically reset the selection when the microphone call is ended Without this function when the call is ended the zones selection in blue is still active Stop messages if owner If selected only the client who has started the call can stop it The others can t do this Wait messages This parameter defines the waiting time between successive messages It can be set from 1 to 30 seconds This delay is able to space the messages diffusion to avoid fast succession of diffusion on the same zone Audio Messages Priority This parameter is used for the messages which are not associated with a bank or associated with a bank which have no predefined priority For these messages the user can chose between three level of priority lower medium and higher The corresponding value of priority is set here Audio Messages Priority High 100 al gt Medium 50 4 gt C Low 1 4 Chimes for clients Chimes for clients commercial Chimel_com Add security chime _secu 80 Informative Chime3_Inf 50 Delete type of call chime priority This box able the user to associate calls with predefined chime and priority Several type of call or family are defined here each associated with a chime and a priority When the user won t to do a call with chime he will have to choose between these types of call So the call will take the associated prio
17. The both PMIP communicate directly together Client 1 PC Client 2 Touch screen Touch screen Vox net GUI Voxnet GUI A PMIP series There is three types of PMIP the PMIP N the PMIP K and the PMIP D The PMIP N consists of a microphone and a speaker As it has no screen it must be associated with a VoxO net client with its own graphical user interface GUI Vox mnet network CPR 1 gt The PMIP K consists of a microphone and a speaker It provides also a key able to open or close the microphone As it have no screen it must be associate with a Vox net client with its own graphical user interface GUI The PMIP K may be used as intercom in this case the button able to call a fixed IP destination Vox net GUI o WMaxrinet network TC P IP The PMIP D consist of a microphone and a speaker with a Graphical User Interface This one has its own touch screen display as graphical user interface It communicates directly with the server by using the CLIENT protocol It can work alone without any client PC The PMIP D may be used as intercom its display able to get several virtual buttons each button allow to call a fixed IP destination PMIP D With Vox net GUI O VWoxmnet network TCP I gt PMIP D Graphical User Interface GUI The Graphical User Interface of the PMIP D is done through the ini file Web Page In the web page of the PMIP D select the tab Config and G
18. Vox net use a command protocol It contain order to lead the streaming as start end or volume It can be Barix Instreamer Barix Extreamer or Vox net Vox net display in the faults box CMD absent if the commands does not works Command Config In the web page of the VNB PMIP select the tab Config and Command to open this page To enter in the Config web page a login and password is required By default the login is ateis and the password is ateis Home Audio Status Config System Decoder Encoder RS232 Command Intercom TCP Command Interface Settings OFF TCP port 12302 Apply new settings Copyright 2006 Ateis International About Us Mode Select in the unroll menu the mode of commands That is means which protocol is used to control the VNB PMIP The mode Vox net is not ready implemented Vox net Barx Exstreamer Barix Instreamer OFF Unable the command communication VoxOnet The VNB PMIP is controlled by the Vox net protocol Barix Extreamer The VNB PMIP is controlled by the Barix Extreamer protocol Barix Instreamer The VNB PMIP is controlled by the Barix Instreamer protocol TCP port The TCP port used to command the VNB PMIP It s always 12302 When any settings was been changed here don t forget to click Apply new Settings to store the new setting in the VNB Command Status In the web page of the VNB PMIP select the tab Status and Command to
19. intercon CONE eienen a E A A 217 rer on oo a a a a a a A nn 219 PA OO 220 FXO CORNE deiran a E 220 DOW Sr ad e o AE A A E ANE A A ONA E EE 221 Matte SIN APS ti tai 222 Matrik conne urati ON A le Ca dote 224 Matrix LOL LEGAL TO GA 1e ids 229 MEA LS RE UN Sn lt Rte ne set Vesta 232 Contacts ATE S Ateis International S A Chemin du D vent 1024 Ecublens Switzerland Mr Phone 41 0 21 881 25 10 INTERNATIONAL Fax 41 0 21 881 25 09 Web http www ateis international com Mail info ateis international com Ateis Middle East Building SEA room 324 DAFZA DUBAI United Arab Emirats Phone 971 4609 1325 24 Fax 971 4609 1326 Web contact http www ateis international com Ateis France 34 avenue de l Europe Z A Font Ratel CLAIX FRANCE Phone 33 0 4 76 99 26 30 Fax 33 0 4 76 99 26 31 Web contact http www ateis france fr Ateis Germany Industriestrasse 8 D 63801 Kleinostheim Deutschland Phone 49 0 60 27 97 98 85 Fax 49 0 60 27 97 98 80 Web http www ateis germany de Mail service ateis germany com Ateis UK Fountain Court 2 Victoria Square Victoria Street St Albans Hertfordshire AL1 3TF UK phone 44 0 8456 521 511 Fax 44 0 8456 522 527 Web contact http www ateis co uk Ateis China felt CE RAR ID mit Een TKR e555 EX 5610 H 021 54495191 92 EH 021 54495193 Web contact http www ateis com cn Presentation ATEIS ATE S
20. 12 09 50 005 RECORD 16 09 2009 09 52 45 y Listen New Record men rare A Parameters PlayNow iy lee Medium Core Auto To finish the recording press on Now you can see the new record with a name automatically attributed in the list 001 RECORD 15 09 2009 12 07 21 002 RECORD 15 09 2009 12 08 12 003 RECORD 15 09 2009 12 09 50 005 RECORD 16 09 2009 09 52 45 006 RECORD 16 09 2009 10 08 17 Configure Messages Rename _t This button allows changing the name of the message This keyboard will appear on the screen helpful on a touch screen 106 RECORD 16 09 2009 10 08 17 This button allows placing the messages in the banks The banks are managed creation association in the Configuration Audio Select a message 001 RECORD 15 09 2009 12 07 21 002 RECORD 15 09 2009 12 08 12 003 RECORD 15 09 2009 12 09 50 Delete Rename Move Listen New Record Auin Parameters Click on Move a window will appear and list the banks Messages Bank2 Banks import a Auto Delete Rename Move to Listen Hew Record Parameters So oo CHINS a iam The Move button change to Move to indicating that you have now to chose the target bank E i Program Move Move to Click on one of the bank This bank will be opened with your message inside Auto A By clicking on the button Auto parameters the current parameters of the messag
21. 23 800 Denoise Enable the denoiser to decrease the audio noise Echo Cancellation Able to eliminate the audio echo AGC Enable the Automatic Gain Control Call Options Queue Incoming calls Max The maximum number of call accepted The supplementary calls will be forwarded By accepted we mean one active call and the calls placed in the waiting queue Forward All If selected this option allows forwarding all the incoming calls Forward on Busy If selected this option allows forwarding the incoming calls if the intercom is busy or if the waiting queue is full Forward on No Answer If selected this option allows forwarding the incoming calls if there is no answer after x seconds Forward to Address The destination IP address used in case of the call have to be forwarded TCP Controller IP If the intercom is controlled by en external TCP controller write here the IP address of the device which controls the intercom When any settings was been changed here don t forget to click Apply new settings to store the new setting in the VNB PMIP Intercom Status In the web page of the VNB PMIP select the tab Status and Intercom to open this page Home Status Config System Decoder Encoder Command Intercom Intercom Status IP control connected State Idle Copyright 2006 Ateis International About Us Intercom Status IP control Display the state of the connection with the TCP controller State The
22. 255 255 255 0 152 168 10 2 132 168 10 20 E E 3 FTP Utsemame Password Port Automatic switching anonymous z foo oo Test FTP on backup server Hoda C Sarve Dual Server C Cliant of A Cancel o Server 2 IP audio and subnet mask 192 168 10 3 255 255 255 0 IF Backup audio control 192 168 10 2 IP Shared audio control 192 168 10 20 Configuration Window on a Client In the Vox Net software click on the Menu button and chose configuration Basically the Vox net software installed on each computer is the same On the window s bottom a box called Mode able to specify the using mode of the PC Mode Server 0 Dual Server C Chent of As you want to configure a Client select the mode Client Of To able the Client to communicate with the server the IP Address of the server must be write in the box next to Client Of Client of 1 42 163 0 100 For the Client of Vox net only two tabs are available Access and Maintenance All the others Vox net parameters of the configuration must be modified on the server AB Vox Net Configuration Administrator Access limited to 15 mn s 727977 al gt Authorizations for Users 1 IDEMOYN Add Delete utoLog Record message i Site parameters W YWolume setting 4 4 Play message W Zone parameters W Music Setting 4 Delete Message i Local music M Access x Priority message Window i Microphone call 4
23. Chimes for clients High 100 al commercial Chimel_com security chime _ secu 80 5 Medium 50 4 Music On Off Scheduler Broadcast Audio Messages Priority Add Message banks and associate chime Commercial Chimel_com 40 Add Secunty chimez secu 80 Informative Chime3_Inf 50 Delete Add Delete 00 00 00 00 Mode Ok f Server f Dual Server C Client of WN Sn rs Max Audio Streams 2 Max Audio Streams EJ gt This parameter defines the number of audio flux allowed to be sent in the network at the same time This value from 1 to 10 is directly bounded with the physical network Capacities To understand the relationship between the network and the number of allowed flux please refer to Installation Network Broadcast bel Broadcast Passive multicast Broadcast Multicast Active multicast Here you can select the audio streaming method This mode is bounded to the infrastructure of the Ethernet network set up in particular with the network devices set up routers switchs In broadcast communication the data diffusion is done from one unique source to several receptors in the same network The data stream is send with an unique destination address It s named broadcast IP address as for example in IP version 4 IPv4 192 168 10 255 where the subnet is 192 168 10 xxx and all the bit in the host part is set to 1 All the receptors in with an address between 192 168 10 1 and 192 168 10 254
24. D with Intercom GUI One IP address Phone network private automatic branch exchange VNB FXO One IP address e One phone number FXO Config Inthe web page of the VNB FXO select the tab Config and FXO to open this page Home Status Config System Config Logic Audio RS252 Command Intercom FRO FXO Interface Settings Phone call Target Intercom address 192168 10 140 Intercom call Default Phone Number 00218812510 Apply new settings Copyright 2006 Ateis International About Us FXO Interface Settings Phone call Target address Write here the IP address of the target intercom If a telephone call is received from the phone line RJ11 on the VNB FXO the call will be forwarded through ethernet to the target intercom device with this IP address Intercom call Default Phone Number Write here the phone number of the remote telephone If an intercom call is received from ethernet RJ45 on the VNB FXO the call will be forwarded through the phone line to the telephone with this phone number When any settings was been changed here don t forget to click Apply new settings to store the new setting in the VNB FXO FXO Status Inthe web page of the VNB FXO select the tab Status and FXO to open this page Home Status Config System Logic Network R5232 Command Intercom FXO FXO Board Status Line Side Device ID 3 System Side Revision 4 150 Cap Link 1 Line Side Device Revisi
25. IP of the both servers In the Clients configuration only one server must be displayed with this shared IP address In this example we chose 192 168 10 20 First of all a different statics IP address must be set in each PC server WARNING One must have an odd IP address the last number and the other server must have a even IP address To do this you can either configure yourself by the Network configuration of windows or write an IP in the box IP Audio and subnet mask and click on the button Clic here to make this computer compatible with the recorded network configuration Clic here to make this computer compatible with recorded network configuration Then select your network card in the both unroll menu orange and green Control that its IP address in the box IP audio and subnet mask and your network card match In this example the first PC have the IP address 192 168 10 2 and the second PC have the IP address 192 168 10 3 E ox Net Configuration E E Network card for Audio encoders decoders 2755 755 0 Broadcom NetXtreme G Iga bit nernel 2 168 IP Audio and subnet mask IP Backup Audio IP Shared Audio a 255 255 255 0 pes om 92 168 10 20 Network card for Control IP Data and subnet mask IP Backup Control IP Shared Control Clients 1 92 168 102 255 255 255 0 1 92 168 103 1 92 168 10 20 L Connection FTP Utsername Password Port anonymous 21 Test FTP on backup server Hode Ok p Se
26. Master allows to do remote access in multipoint Sa e eR ATE S MODBUS Evac board 32E allows to connect an Evac Board 32E ATE S Multipoint Master Evac board 16E16C allows to connect an Evac Board 16E16C NOTIFIER ID3000 ATEIS Evac Board 22E ATEIS Evac Board 16E16C The port 3 used to link the IDA4SW matrix with a IDA4SU is not displayed because it cannot be changed In the middle of the window click on the tab Logical Zones This window allows to associate codes and zones One code can designate one or several zones as example a code can be use to make an all call if all the zones are notched here A Configuratio AL SITE changed c 1 Write ele pam a EE 3 1 L001 O Looz O LOO3 O Loo4 Codes Code 00 Code O02 Lal Code 003 FF Code 004 Code 005 empty Code 006 empty Code 007 empty Code 008 empty Code 009 empty Code 010 empty Copy Code O11 empty Code O12 empty Paste Code 013 empty Code 014 empty Code 015 empty M Delete dd Priority In the top left of the window Configuration unroll the menu and select OdB inputs In the middle of the configuration window click on the tab Priority KAPPA Configuration INITIAL SITE changed clic on Write ko 048 inputs 1 IDA Read Write Restarr Import Export Priority Mode 1 TOO 1 0 dE 100 Ida 1 Port 1 not monitored 100 1048 1 Permanent 1003 1048 1 Permanent 1004 10d8 1 Permanent A A A A Pr
27. Priority In the top left of the Configuration window unroll the general menu and select OdB inputs In the middle of the configuration window click on the Priority tab MP rs i on Wie i mx 04B inputs 1 IDA Read Write Restart Import Export 1 1001 10dB 100 Ida 1 Port 1 not monitored 1002 1048 1 Permanent 1003 10dB8 1 Permanent 1004 10dB 1 Permanent 4 Il General Audio Equalization Routing Priority Y Priority High ah Call station monitoring speaker This is the input priority It will limit the priority of the incoming audio line That s means if the input used by the server has a priority of 20 when the server will send a message with high priority of 100 this message will finally has a priority of 20 Set the priority of 1001 at 100 When the setting is done click on _Mrive to store the configuration in the IDA matrix VoxOnet amp PMIP D VNB matrix This quick start explains how to set up a Vox net system with one server one client PMIP D and a VNB connected to a matrix For this example In the matrix we will define 4 zones In the Vox net software we want to have 4 buttons one for each IDA zones The PMIP D is able to make call to each zones of the matrix The server is able to send messages to each zones of the matrix We chose the following IP address Vox net server 192 168 10 110 PMIP D 192 168 10 8 VNB 192 168 10 10 Subnet mask 255
28. SITE changed clic on Write Serial ports 1 IDA Read Write Restart d rt a oer Pons Ta Tios alee Ta ae 1 PCIDE4XM 38400 None 1 2 MODAN 3600 Even 1 8 Don dis settings Available OdB inputs ecrpaaxu 6 1002 1003 No parity 1 stopbit le 8 databits ne Audio channels Channel 1 1001 Channel 2 3 4 Channel 3 E Channel 4 da a The audio inputs controlled by Vox net must be associated with the port 1 and with a channel Input and channel association Click in the row of the port 1 PCIDA4XM Select the input linked to the VNB in the available OdB inputs box Select a channel in order in the Audio channels box Pu Then click on _ lt r By the same way associate all the audio line used by Vox net to communicate with the matrix with the port 1 The channels must by associate in order the channel one is the first PU Serial port settings The port 1 is used by the PCIDA4XM software it must be configured like follow 1 Click in the row of the port to configure port 1 5 Inthe settings box select the protocol of this port PCIDA4XM 6 Set all the serial parameters 38400 bauds No parity 1 stopbit 8 databits Use the same way to configure the others ports if they are used Now in the middle of the window click on the tab Logical Zones A Configuration INITIAL SITE changed clic on Write co ea Serial
29. TCP IP VOxinet network VNB FXO The VNB FXO is a VNB enhanced with a FXO phone line interface on a RJ11 connector As the VNB the VNB FXO is available with the both case simple or rack able The features of the VNB are all available in the VNB FXO The VNB FXO have its own IP address with subnet mask it is linked to the ethernet network by a RJ45 cable The VNB is configurable in a web interface reachable by its IP address VNB front face VNB rear face power led fault led VHB 24 DC RELAT REL OUTS GLAM AUDIO QUT AUDIO H La rad 0 al oO LI i S312 Da Oo FACETS REE TIE TT mpa 2022285 mol ee SS 0 2 2 2 Z OU teke Oo RJ45 RJ11 Ethernet network TCP IP Phone network The VNB FXO can be used as a simple gateway between the PABA telephone network and the TCP IP network The VNB FXO is connected to the ethernet network with the RJ45 connector and has its own IP address The difference with the other VNB is that the VNB FXO is connected to a dedicated phone line with a RJ11 connector This phone line must be operational with a specific own phone number RJ11 pins RJ11 pin Pair T R Cat 5e 6 colors Colors Old colors Corman D colors 3 T 6 white green 4 white green orange m pink 2 T a white orange white orange os black D green 1 1 R qa blue blue white MN red gt white 2 1 T white blue white blue green brown 2 R Em orange A orange
30. Vox Net Clients atrixes udio aola ccess alntenance etwor de messages Setup Setup Li Musi 3 NAME MICROPHONE IP SPEAKER IP PRIORITY de de Music music library 2 un 0 0 0 0 0 0 0 0 0 0 0 Music Files q e 1 server 192 168 106 110 0 0 0 0 0 0 0 0 100 Call 2 client EMIE 192 168 10 109 192 168 10 159 0 0 0 0 90 Call w 33 music library 1 0 0 0 0 0 0 0 0 0 0 0 0 Music a music library 0 0 0 0 0 0 0 0 O_0_0_0 Music Music Mode Vox net can works in two music modes normal and enhanced This mode is selected in the configuration window of Vox Net tab Audio from the server PC normal mode enhanced mode Enhanced Music Hode W Enhanced Music Hode Enhanced Music Mode This mode makes possible several actions e Selection between several music sources internal or external e Selection of the zones where the music has to be send e Setting of the time slot of music diffusion for each musical source The music can be route zone by zone and in all stations In addition when a message or call diffusion is made only the concerned zones will stop the music The others keep the music on To diffuse the music the user has to select the zones where the music has to be sent and click on MUSIC button CD player Then the user can select which source has to be diffused Music library Settings Normal Music Mode This mode allows predefining the music routing that s means to as
31. Vox THet Servers Now the both server are running one is the active server and the other is the backup server The control if the active server is still running the backup server will permanently send the string BKP to the active server If the active server is working it will send back the string ACT ACTIVE SERVER BACKUP SERVER 2 rat mm D om NTI sm 7 7 2 a me wsi Pecera ALT Zane 13 066258 Racecee ACT MIA Sand WEP SOTA Beceawe ALT Gimp Bis l MAL San MEF MALIA becerro ACT MIDA Jend HE E 2 H 3 Zona a a J ESE y gt pu twee rm Only two actions are available on the backup server Close 1 PRE The user can quit Vox Net in the backup server without disturbing the system because the active server keep the control Switch SEVE S R The user can switch the backup server to active server e lfthe user switch the backup server will becomes the active server The password will be required on the both PC The switching takes a few time to switch during which Vox net can not do any actions The new active server will start after 5 seconds and the new backup server will start after 60 seconds e lfthe backup server fails or if the user closes the software this fault will be reported in the fault box of the active server and Vox net will be still working e lfthe active server fails or lose the network connection the backu
32. a 119 Contisure a MATE A SR dE Ed 122 Contigur FIPTordualSer er mode in id 125 PEPA COUN Lati cd da 125 IIS and the FTP service Installation Window Vista 126 Configure the FTP Service Window Vista sense 126 IIS and the FTP service Installation Window server 2003 129 Configure the FTP Service Window server 2003 129 Control your FTP configuration in your web browser ss 131 Contisure Dual Server Mode ea 131 Testi NBI a Ta 133 Use a third party control Modbus OPC ooocccccccnnnccnnncnnnnccnnnnonanocnnnnnnanocnnnnonanononnonanoconnnonanoronnnonaaioss 135 PPP SN Le ne ce di 135 CIC S CES rias 137 Vox net 8 VNB matrix complete procedure ooooononnnnnccccnccncnononononnnonononanananacccnnncnonnnnnnnnononononanananos 137 WOK COIN ta a se e e io e o e E tes nn 138 VNB Presenta OM iO 141 VNB COPE WARIO Ni 143 Matrix COMME UMAUON efecto AS die Pr dite Eine ie Male 146 Voxone t amp PMIP D VNB MATED LR A 150 o ee ee eC A aor ane nie Tae Tce 151 PIPE Presentation ARA a E 152 VNB Presentations 153 PIVIIP D Contursi da as 153 PMI D GUI CON CUra HON ii teen naa elec on ie 156 VNB CO tii Surtido 158 Matrix COMPS UPAUIOM outsider dicos 158 Intercom between Telephone and PMIP D with VNB FXO PABA cccccssseecccseessecceeeeeeseeceeeeeeeeees 159 VNB EXO CON IBUTATIOM HE ali 160 PMIP D COANBUAtIONS SSSR Re Dire nc cm Do 161 PMIP D GUI CONTIBUrATIONMES LE al E 163 VNB VNB continuous streaming
33. a music source Messages Server 0dB Client 2 0dB Client 3 Music library Matris CD player a Yalidate o Stant Time End Time 1800 1400 Days i Monday iM Thursday M Saturday All Y Thuesday I Friday F Sunday M Wednesday M Activated Start Time This box allows to set the start time Write here the time of the beginning of the music diffusion End Time This box allows setting the end time Write here in which hour the music has to stop Days Here you can find all the days of the week Notch all the days in which the music has to be programmed If the option Activated is not notched the program will be stored but it won t be active and the music won t be diffused Now it is necessary to select the zones where must be diffused the music Several zones in several remote stations can be used to diffuse the music source In the main Vox net window just left click on the concerned zones At last store your settings by clicking on the button Validate Program The button Close will close the window Now during the programmed time slot the music will be diffused in the selected zones Schedule Messages Zones selection In the buttons area of the main Vox net window select the zones where you want to diffuse the message Open the messages window To set the message scheduler click on the but
34. absent Poste 1 07 11 2008 15 21 51 2 Event Begin soir eee 07 11 2008 15 21 57 2 Event nd Message page E El Date Time Fault Event Begin End Details For each row we can see e Its date and time e lf itis an event or a fault e lf itis the beginning or the end of the event e The details of the event First ae Click on First to see the first event Before i n Click on Before to see the precedent event After n i Click on After to see the next event Last Bda a Click on Last to see the last event Search Click on Search to open the search window Print O Click on Print to print the current history a printer must be configured before Close Click on Close to close the history window and go back to the main window of Vox net Search window The search function is able to make smaller the research to find a specific thing from 08 10 2008 at Ww Start Stop software x Start Stop function x Clock setting Calls lt lt Audio Messages x Programs Music Yolume al 4 Dialogs Matrixes faults All zonez Clients Faults Others lt lt 4 In the top of the window the both box is able to define the date and time from which the events are visible In the left of the window several types of events can be selected The visible matrices faults can be restricted by zone Unroll the menu next to the Matrices faults and sele
35. and size option which allow relocating and sizing the button see Vea chapter Design Place a Button Close Vox Met Buttons destruction option which allow the destruction of area and Stop this computer group see chapter Design Delete a Button Background image open a window to select or delete the drawing format bmp to display on the background of the main window see chapter Design Background image Parameter display this option replace the button name by the parameter which are affected them Don t ask this option inhibited the questioning Site Saving at every change supplied Beep this option speed up a beep on the computer loudspeaker when a defect living Music on this control allow or not the overall diffusion of music on the Modan Matrix This function can be also schedule Memorize the window this control display the dialogue observation window Dialogs display This option display the dialogue observation window see chapter Mechanism Dialog display Close Vox Net control which stop Vox Net Stop this computer control which stop Vox Net and the computer Dialogs Display The Vox net dialogs box able to see the communication between the computer using the Vox net application and the Vox net server That is means that if the dialogs box is open on a client PC of Vox net it will display all the communication between this client PC and the Vox net server If the dialogs box is open on the server PC of Vox ne
36. box displays all the programs of the message schedulers and all the programs of the music scheduler message name days of diffusion 08 00 09 00 Mo ON Music library 1 18 00 0 30 MoThHNeThEr a CH Message sweet 17 01 18 01 00 10 FrSaSu ON welcom message 08 01 09 01 00 20 MoThWeThFr tal start time end time period beginning of difusion end of diffusion time between successive diffusions only for messages In this example e The external music source called CD player will be diffused between 8 00 and 09 00 only on Monday e The internal music library called Music library 1 will be diffused between 18 00 and 20 30 from Monday to Friday e The message Message sweet will be diffused between 17 01 and 18 01 every 10 minutes from Friday to Sunday e The message welcome message will be diffused between 08 01 and 09 01 every 20 minutes from Monday to Friday see Mechanism Messages see How to Schedule Messages Waiting Messages Box The waiting messages box is on the top right of the main Vox net window This box allows the user to know if a message waits to be diffused Waiting Messages blues M1C1 cong 3 notes 50 1 If the zones where a message has to be diffuse are already busy by another source with a higher priority the message will wait in this list It will be diffused as soon as possible when the busy zones will become free again message name chime name blues M101
37. complete procedure 165 VNB Presentate RO Re D TRUE 166 VNB L isend r Conie a ON iio 168 VNB 2 receiver Contursi td 172 NOK COIN DATES e A en eet 176 Sale A o aeteateeDewatat a aauectcoutaneuce eats 176 WARNI o q ni aide noi ti dd ie 176 CADDIE RI E On Li ne 177 UN o hee AT 178 VNB FAO snc isi cacti asda oes ace a ees aa wn aa dt dt 181 PIIP ccs ca ee hel ci cama cla area tec ta cca ack Adela cach A klein ac a 183 PMIP D Graphical User Interface GUI oocccccccnnnccnnnnonnncnnnnnnnanoconnnonacninonnnonanoconnnonanonnnnnonanonnnnnnons 185 M DIAS ne ae On ONES ll ed 185 GUI COnriG uration AMI asi boda 187 Era mp O EU da 189 PIMP Se VNB CONS UPATIOMEES EE EDS D cent ete 190 HOME EE a ur Seeman au tee 191 CONVE CONE eannan Sn de ne diet 192 BORIC Re SN ne Et a ra A Sa dt 193 FOSC CON olaa 193 LOSE SAUS o in 197 VNB AUdIO COn acia 198 PMIPAUdIO Conti id Sd SR in 200 D COR AIS et a 202 Decoder CONT ra en at en ne 202 DIAL Te A men ER AE es ea a a AN nn 204 ERIC OGOM ES MR Me RS Re Re er A ace tn O 205 Encoder Conos 205 Encod r SSA A A ne ee ices te ee ne 207 A O nee 208 A A I Rr A A TP 208 AS A Re uen Re A Re ne NN en 210 COMMANC bios 211 Command CONS oo 211 Command y Status Essen en ton cs ce ne ado 212 AO 213 o yo AA O A ee 213 A II paeacaiaiiedis slau uasloecbiralea auto paeac ana dlgsntaoesawaaatarseutee 214 SN o AA O A sit etes E 215 A E E dd bec ne Ge 216 Ater OMen a a a T aaoaias 217
38. current state of the Intercom It display if the intercom is connected with another intercom or not and display the IP address of the remote intercom generally the server Calls Table Display the call state with the IP of the remote intercom Example In Idle state the intercom is connected with the TCP controller Intercom Status Mode TCP Controller connected State Idle The intercom receives an incoming call from the remote intercom 10 130 83 172 Intercom Status Mode TCP Controller connected state 1 call s Calls Table 0 Call from 10 130 83 172 Ringing The user answers by accepting the call Intercom Status Mode TCP Controller connected state 1 call s Calls Table O Call fom 10 130 83 172 Active FXO The VNB FXO can be used as a simple gateway between the PABA telephone network and the TCP IP network The VNB FXO is connected to the ethernet network with the RJ45 connector and has its own IP address The difference with the other VNB is that the VNB FXO is connected to a dedicated phone line with a RJ11 connector This phone line must be operational with a specific own phone number To be clear the following parameters will be used in the FXO settings e VNB FXO The IP address of the VNB FXO The phone number of the VNB FXO e Target Intercom The IP address of the target intercom e Telephone The phone number of a remote telephone Telephone One phone number Target Intercom PMIP
39. done through the ini file In the web page of the PMIP D select the Config tab then GUI tab to open this page ATEIS embedded HTTP server Home Status Config System Config Logic Audio Decoder Encoder Command Intercom Vox Net Client Settings Vox Net Server Address 192 168 10 110 Options Fault if not connected Apply new settings GUI configuration export Export current configuration GUI configuration import Select file Parcourir Import this INI file O a vw Ateis International About Us Copyright 2008 Under Vox net Client Address write the IP address of the Vox net server in our example it is 192 168 10 110 Notch the option Fault if not connected if you want the PMIP D displaying a fault when the server is not connected Export current configuration If you don t already have a configuration file then click on to open it on your i Mozilla Firefox Fichier Edition Affichage Historique Marque pages Outils E dy A http 192 168 10 140 simplegui ini Microsoft Outlook We Ateis International ATEIS Download ATEIS FRANCE P ATEIS peo web browser http 192 168 10 140 simplequi ini Save it on your PC Main NbPages 4 DisplaySourceName 1 a 2 AutoResetselection 0 Msgfueued Attente A YA MsgPartial Partiel SIT PI O O0 MsgRejected Rejet FontLabel 18 FontSource 12 Pagel Funci ZONESEL Labell Matrix 1 zone 1
40. e Your configuration was not charged from the right location It must be c Vox Net and nothing else Go to Menu change Site Message cannot be sent it appears quickly in the e The TCP port of the commands is waiting messages box and it disappears wrong History Window In the main window of Vox net software click on the button History to open the Vox net This window allows seeing the events and faults history of Vox net Yoxi0Net Site History cvox net voxanetseryl vns Tools 07 11 2008 15 24 2710 8710 NR After Last Search Print Close 07 11 2008 11 23 00 2 Event Begin Message played piano gt M2C1 2 07 11 2008 11 23 42 2 Event End Message played piano 07 11 2008 11 30 00 2 Event Program loaded blues M1iC1 2 Gong 3 notes 50 1 07 11 2008 11 30 00 2 Event Begin Message played blues gt Mici 2 07 11 2008 11 30 40 2 Event End Message played iblues 07 11 2008 11 35 00 2 Event Program loaded piano M201 2 Gong 3 notes 50 1 07 11 2008 11 35 00 2 Event Begin Message played piano gt M2c1 2 07 11 2008 11 30 42 2 Event End Message played piano 07 11 2008 11 45 00 2 Event Program loaded blues M1C1 2 Gong 3 notes 50 1 07 11 2008 11 45 00 2 Event Begin Message played iblues gt M1C1 2 07 11 2008 11 45 40 2 Event End Message played iblues 07 11 2008 11 53 00 2 Event Program loaded piano M2C1 2 Gong 3 notes 50 1 O7 11 2008 11 53 00 2 Event Begin Message played pia
41. gt Options 1 Client 1 192_168 10 110 192_168_10 160 PMIP VNB 0 Call 2 pmipd 192 168 10 140 1592 168 10 140 EMIP VNE 100 Call i 3 Music3 0 0 0 0 0 0 0 0 0 0 0 0 Music As audio source and encoder you can use e a microphone or any audio source connected to an encoder VNB or instreamer Barix e aPMIP D which contains the client of Vox net e aPMIP N PMIP K Audio quality The audio quality of the message must be chose in the encoder configuration web page As example we ll set a PMIP N reach its web interface by clicking on setup in the client configuration window or write its IP address in your web browser To configure your encoder please see How to configure an encoder Select Config and Encoder to open this page Home Status Config System Config Logic Audio Decoder 1 Encoder 1 Command Intercom Audio Stream Encoder Settings Mode OFF Target port 8010 Target Address 192 168 10 255 Packets TIL 32 Packets Optimization Latency Format MP3 Frequency 48000 Hz Bit Rate 192 kbitls Apply new settings Copyright 2008 Ateis International About Us To be played on Vox net the messages must be recorded in MP3 not SPEEX SPEEX is only available for microphone call Recording In the VoxO net software on a client PC of Vox net click on the window button to open this 001 RECORD 15 09 2009 12 07 21 002 RECORD 15 09 2009 12 08 12 003 RECORD 15 09 2009
42. in Broadcast mode Streaming IP address Streaming UDP Port Server Message broadcast IP of the network Message 8300 1 source simultaneously Server Message broadcast IP of the network Source Message 1 8300 3 source simultaneously Source Message 2 8301 Source Message 3 8302 Server Internal Music broadcast IP of the network Internal Music 8200 1 source simultaneously Server Internal Music broadcast IP of the network Source Internal Music 1 8200 3 source simultaneously Source Internal Music 2 8201 Source Internal Music 3 8202 Microphone number 1 broadcast IP of the network 8010 Microphone number 2 broadcast IP of the network 8011 Microphone number 3 broadcast IP of the network 8012 Streaming IP Address and UDP Ports in Multicast Passif Actif mode Streaming IP address Streaming UDP Port Server Message 224 0 36 0 Message 8300 1 source simultaneously Server Message Source Message 1 224 0 36 0 Source Message 1 8300 3 source simultaneously Source Message 2 224 0 36 1 Source Message 2 8301 Source Message 3 224 0 36 2 Source Message 3 8302 Server Internal Music broadcast IP of the network Internal Music 8200 1 source simultaneously Server Internal Music Source Message 1 224 0 36 0 Source Internal Music 1 8200 3 source simultaneously Source Message 2 224 0 36 1 Source Internal Music 2 8201 Source Message 3 224 0 36 2 Source Internal Music 3 8202 Microphone numbe
43. itis played as soon as possible by cking on Record E When the record is start a meter indicates the duration of the announcement To end the record click on Stop Recording in progress click on Stop to complete recording aa When the announcement is recorded the operator can either listen to it on the control speaker by clicking on Listen or to diffuse the announcement by clicking on Play The recorded call will be diffuse as soon as the selected zone will be set free by the more priority source Recording complete click on Listen to listen your nnouncement Cancel or Play The parameter Record Max able to limit the duration of recorded call for all the clients It can be fixed from 1 to 30 minutes After this time limit the record will be automatically stopped without any user action or control Enhanced Music Mode W Enhanced Music Mode If selected this parameter set Vox net in the enhanced music mode This mode makes possible several actions Selection between several music sources A music source can be internal or external please refer to Configuration Client Selection of the zones where the music has to be send Setting of the time slot of music diffusion for each musical source The music can be route zone by zone and in all stations In addition when a message or call diffusion is made only the concerned zones will stop the music The others keep the music on Music library
44. its IP address Audio It has two symmetrical audio input channels and two symmetrical audio output channels The inputs allow encoding an external source and the outputs allow decoding audio coming from the network The input does not provide phantom power 48V The using of an electrets microphone requests an external pre amplifier Serial port RS232 It have also on serial RS232 ports one allow to encode the data to the network or to decode the data coming from the network depending of the configuration as TCP server or TCP client The VNB convert the RS232 data to the RS485 format adapted for the TCP IP network Connectors VNB front face VNB rear face AudioOut1 amp 2 Audioln1 amp 2 power led fault led E RE 22 RE TCP IP telephone e a Vox net network power supply RelayOut18 2 Logic In RS232 In our example we will use the VNB as decoder for matrix So we will only use the both audio outputs and the RS232 of the VNB We also won t use the telephone FXO interface Wiring Server PC Vox net GUI Messages Music library morir Balanced audio lines 24 V DC VNB Configuration The configuration of the VNB PMIP is available by the web navigator Simply write its IP address A http 192 168 0 159 Network In the web page of the VNB PMIP select the tab System A login and password is required By default the login is ateis and the password is ateis Select the t
45. not interfere The both PMIP communicate directly together Client 1 PC Client 2 Touch screen Touch screen Voxi net GUI Voxi net GUI PMIP D PMIP K S A 4 A Intercom Config In the web page of the VNB PMIP select the tab Config and Intercom to open this page Home Status Contig System Contig Logic Audio Decoder 1 Encoder 1 Command Intercom Intercom Settings Mode External TCP Control Speex Quality El Y Denoise Echo Cancellation MAGC Call Options FiQueue Incoming calls 1 Forward All Forward on Busy Forward on No Answer Forward To Address TCP Controller IP 0 130 1 83 105 k Apply new settings Copyright 2008 Ateis International About Us External TCP Control Internal Command Auto Answer Mode OFF The intercom is not used External TCP Control Select this mode if the intercom is leaded by an external TCP device as a PC with VNClient or a software which control the intercom Internal Command Select this mode if the control of the intercom is internal by using the logic inputs contact or key Config and Logic tab Key Command to execute when ON answer OFF Key Command to execute when ON call addr 10 130 83 172 OFF Auto Answer Select this option if you want the intercom answering automatically Speex quality The quality level of the encoding in Speex format 4 12800 8 27 800 5 16 800 9 34 200 6 20 600 10 42 200 7
46. site with the select size Create Click on the button will make appear the elements created on the site and will close the window Close This button close the window and save any data corresponding to the buttons Then it s possible to size again the new elements of the site with the same process than to change the size above because the action location and size of the button MENU is automatically activate The process is the same for the Group and Bookmark buttons creation By clicking on Create the window will be closed and the news buttons will appear in the main window Place a Button From the Menu click on Place and Size Buttons creation Place and size Buttons destruction To move the button click inside the button and simply drag and drop it to its new place To define the size of the button click in the grey area on the right or on the bottom of the button and move the mouse to adjust the size Delete a Button From the Menu click on Buttons destruction Buttons creation Place and size Buttons destruction To delete the button simply click inside the button A window will appear to confirm the destruction click on Yes Vox Net Set a Zone button To define the parameters of the buttons right click on the button that you want to adjust This window will appear Parameters Matrix Logical one 1 1 Administration PcldadXM Ok Cloze Zone 1 ES E Zone The cursor allow
47. the server has to send security messages it s generally better to set it at the maximum 100 Inversely music sources priority has to be set at the minimum The priority has to be set in accordance with the priority grid defined above Options For clients who are not a music source defined with its priority several options can be here Options LE MiPress to Talk mapas 1 IL L LI Press to Talk If selected user has to keep pull the microphone button all during the call No fault report If selected no default will be displayed if the client is disconnected No fault display If selected no fault will be display in the Vox net client application Listen manuel If selected the automatically listening of message and microphone call for the client will be inactivate Maximum 1 mn This option stop calls from the client after one minute For Internal music sources The option button becomes now the Files button It allows selecting the folder used as music library Click on Files will open the Music library windows allow you to import or delete files Import files Click on Import Files and select the folder where the MP3 file are stored It musts be named Musicx where x is the client number see chapter Mechanism Music Delete files Click on Delete files and select the folder to delete 48 Vox Net Configuration Setup Setup En NAME CLIENT IP MICROPHONE IP SPEAKER P Music library Ee 168
48. will be concern by this stream as far as the mask of sub network of the interface is defined as 255 255 255 0 The scope of the broadcast is limited to a broadcast domain In multicast communication the data diffusion is done from one unique source to a group of destinations simultaneously using the most efficient strategy to deliver the messages over each link of the network only once creating copies only when the links to the multiple destinations split The data stream is sent through the network to several receptors identifying by a specific address of group called multicast address The sender sends a single datagram from the sender s unicast address to the multicast address and the routers take care of making copies and sending them to all receivers that have registered their interest in data from that sender The addresses 224 0 0 0 to 239 255 255 255 are designated as multicast addresses M Instant Record Instant record Record Max 5 minutes This parameter confirms the function of immediate recording of an announcement microphone when the destination of which is occupied by a more priority source If the user tries to start a call in a zone where a priority call is already done the following window Instant Record is open By clicking on Record the user can record the call for an ulterior diffusion The call will be send as soon as possible he current selection is busy but you record your announcement so that
49. yellow and green bar and select your netcard Matrices Select the matrices tab 45 Vox Net Configuration l Setup NAME DECODER IP CHANNEL TYPE Matrix_VN Bl fi 932 168 10 10 182 MF YHE Modan2 IDAport r 1 Matrix VNB 192_168_10_10 0_0_0_0 VNB Delete Mode Ok Server C Dual Server Client of DM concer ax Here you have to define all the stations even if they don t have a matrix Four channels at max are available for each matrix Each VNB can provide 2 audio channels at max In our example we use one VNB with the both two channels Click on Add to add a new matrix Change the matrix name as you want Unroll the CHANNEL box and select channels 1 amp 2 Under Decoder IP write the IP address of the VNB associate to channels 1 and 2 192 168 10 10 Notch the option VNB Don t notch it if you use the Barix extreamer device Unroll the Type menu and select MODAN2 If the VNB is used without a matrix select Any Design In the main window of Vox net click on Menu and then Buttons creation That open this window Buttons creation Size of buttons Set this size to all existing zones LA Creation of 4 button s 4 E Create one Group C Bookmark Close Move the rolling bar to create 4 buttons Adjust the size as you want On the bottom select Zone Then click on create Your mouse has changed to place and size mode automatically So now you can p
50. 10110 0000 0 0 0 0 Y _ Files VW 1 Server 168 10 110 0 0 0 0 100 Call 2 Client 2 2 168 10 120 0 0 0 0 100 Call 3 Client 3 2 168 10 109 192 168 10 111 0 0 0 100 Call 4 CD player 0 0 0 192 168 10 130 0 0 0 100 Call 5 Music library Vox Net D ES Import Files Delete files Cancel Delete Mode p Server C Dual Server C Client of A Cancel Uk e Any unused IP address field must be fill in with 0 0 0 0 e Anexternal music client CD tuner has only a microphone IP address e An internal music client MP3 file database has all IP address field fill in with 0 0 0 0 Coder Decoder Configuration The configuration of the coder and decoder PMIP VNB instreamer extreamer is done in their web page interface An internet navigator must be installed before in the server By clicking on the button Setup above the IP of the microphone you can have a quickly access to the configuration web page of the microphone coder PMIP or VNB By clicking on the button Setup above the IP of the speaker you can have a quickly access to the configuration web page of the speaker decoder PMIP or VNB see PMIP amp VNB configuration AB Vow Nes Configuration N x Cher z Maes ji Au Too Access Marisranos Hemok E ur MAME CLENT E MICSCENORE F SPEARER P PRET Y Server 192 160 100 100 0 0 0 0 0 00 0 100 Call Options seCliant 192 168 10 120 D0 0 0 0 J Lod Call E d Cliant 3 192
51. 2 168 10 11 Start an intercom call to the intercom intercom destination with IP 19 168 10 11 Example of GUI Main NbPages 3 Page1 Func1 ZONESEL Label1 Matrix 1 zone 1 Param1 M1C1 Func2 ZONESEL Label2 Matrix 1 zone 2 Param2 M1C2 Func3 RESET Label3 Reset Func4 JUMP Label4 Messages Param4 2 Func5 ZONESEL Label5 Matrix 2 zone 1 Param5 M2C1 Func6 ZONESEL Label6 Matrix 2 zone 2 Param6 M2C2 Func8 JUMP Label8 Intercom Param8 3 Func12 MIC Label12 MICRO Func13 PRIO Label13 Low Param13 2 Func14 PRIO Label14 Medium Param14 1 Func15 PRIO Label15 High Param15 0 Func16 GONG Labell6 GONG Page2 Func1 MSGSEL Label1 Blues Param1 blues Func2 MSGSEL Label2 Piano Param2 piano Func4 JUMP Label4 Main Page Param4 1 Func5 MSGSEL Label5 Example Param5 Example Func8 VOLINC Label8 VOL Func12 VOLDEC Label12 VOL Func13 MSGPLAY Label13 PLAY Func14 MSGSTOP Label14 STOP Func16 LISTEN Label16 LISTEN Page3 Func1 ICOM Label1 132 Param1 192 168 10 132 Func2 ICOM Label2 157 Param2 192 168 10 157 Func3 ICOM Label3 163 Param3 192 168 10 163 Func4 JUMP Label4 Main Page Param4 1 PMIP amp VNB Configuration The configuration of the VNB PMIP is available by the web navigator Simply write its IP address To have a quick access to the Codec configuration in the Vox Net software click on the Menu button and chose configuration Then select the
52. 2 rock is stored in the folder its name contain the number 2 so it will take this number as message s number 2 All the message s parameters will be replaced in order Message count 2 Message number Bank number Message name register 1 2 rock register 2 03 Alicia register 3 Numbering of Banks The number of a bank is only defined by its order in the list Message banks and associate chime Message banks and associate chime Commercial Chimel_com 40 Add Secuntychime _ secu 80 Informative Chime3_Inf 50 Delete in this example Commercial is bank number 1 Security is the bank 2 and nformative is the bank 3 Numbering of Chimes Basically A chime is a live recorded message or pre recorded message which was been defined as a chime To become a chime the messages must be attributed as chime for client s call This association is made inthe Audio window Menu configuration Audio Chimes for clients commercial Chimel_com Add security chimes secu 80 Informative Chime3_Inf 50 Delete i The numbering of the chimes for clients is defined by their order in this list In this example Chime1_com is the chime number 1 chime2_secu is the chime 2 and Chime3_Inf is the chime 3 To define a chime the other way is to attribute the message as chime associate with a bank of messages This association is made in the Audio window Menu configuration Audio Message banks and associate chime
53. 255 255 0 We chose an audio quality in SPEEX format frequency 16 kHz and baud rate 27 800 bit s Server PC Vox net GUI Messages Music library IP 192 168 10 110 Voxionet network IGRIIP PMIP D Client 1 Touch screen Station 1 Vox net GUI 1 IDA4M IP 192 168 10 8 IP 192 168 10 10 4x amplifier Ir Speakers Vox Net Please refer to the Quick start Complete procedure Vox Net We just explain here the new configuration needed to include the PMIP D to the system Clients Select the Client tab 25 Vox Net Configuration Ex W PHIP VHB NAME CLIENT IP MICROPHONE IP PRIORITY PMIP_D 192 168 10 8 192 168 10 8 100 Call 1 Client 1 192 1684 10 110 0 0 0 0 10 Call 2 PMHITP D 192 168 10 4 192 168 10 8 PHIP VNB 100 Call Stream to 192168 10 265 Port 8010 Mode E Server C Dual Server Client of LA Cancel Ok Here you have to define all the client of Vox net including the server You can see the server on the first raw as client 1 with the IP address of the server 192 168 10 110 Click on Add to add a new raw That add a new client Change the client name as you want In the Client and Microphone IP boxes write the IP address of the PMIP D 192 168 10 8 Notch the option PMIP VNB Set the priority as you want When you select a raw the ____ Setup button able to open the configuration web page of microphone in our case it s the PMIP D
54. 268 125 1053 132 158 110 111 0 5 0 0 4 50 player 0 0 0 192 168 40 139 0 9 0 9 A Hamic library 192 168 10 1106 0 7 0 0 0 0 0 0 Hode j F Save C Dmi lan C Cm Al Lemos m Matrix In the main window of Vox net software click on the button k and chose configuration Then select the tab Matrix All the remote SINAPS matrixes as IDA4 x m must to be configured here E ox Net Configuration Matrixes Setup NAME DECODER IP CHAANMEL TYPE Matrice Ni 168 10 159 Lu BE YNE Modan IDAportl 4 l Matricel A Matricez 192 168 10 158 0 0 0 0 VNB Mode Ok i Server Dual Server Client of Al Cancel a Matrix parameters Click on the button Add to create a new client or and in accordance with the network organization fill in the following parameters Name Channel CHANNEL Channel l Decoder IP Type Any Modan The name of the remote matrix as station railway station for example This name must be legible and clear because it will use for the default display Selection of the channel that you want to define They must be set one by one IP address of the VNB associated with the selected channel Communication protocol type used to control the matrix by the server TYPE Modan IDAportl Any Modan Modan IDAportl Modan IDAportl No communication with the remote matrix In this cas
55. 8 databits It must match with the setting of the VNB The audio inputs controlled by Vox net must be associated with the port 1 and with a channel In the Audio channels box select the channel 1 In the Available OdB input box select the input 1001 Then click _ 5 Pus to associate the input 1001 with the channel 1 Up to four audio channels are available to be associate with the audio inputs The channels must by associate in order the channel one is the first In our example we only use one channel Code Zones In the middle of the window click on the Logical Zones tab Al Configuration INITIAL SITE changed clic on Write Lo Serial ports 1 IDA Read Write Restart Import Export IDA 1 LOM O LO0Z O LO03 CI Loo4 T pa de Code 005 empty Code 006 empty Code 007 empty Code 008 empty Code 00 empty Code 010 empty Copy Code 011 empty Code 012 empty Paste Code 013 empty Code 014 empty Code 015 empty De Delete dl This window able to associate codes with zones One code can designate one or several zones as example a code can be use to make an all call if all the zones are notched here In our example the code 1 designate the zone 1 code 2 designate zone 2 and so on Select the Code 001 then notch the zone L001 Select the Code 002 then notch the zone LOO2 Select the Code 003 then notch the zone LOO3 Select the Code 004 then notch the zone L004
56. 92 1168 10 1 Apply new settings Copyright 2006 Ateis International About Us MAC Address This is the physical ethernet address of the VNB PMIP It cannot be changed IP Settings This is the IP address of the VNB PMIP and its subnet mask The Gateway is not really used for yet To be accessible by Vox net the VNB PMIP must be in the same network To change it write the new IP address in the box and click on l PPIY new settings As the IP address is changed the web browser won t find the new page by itself Simply write the new IP in your navigator LAN http 192 168 10 10 System Time In the web page of the VNB PMIP select the tab System and Time to open this page Home status Config System Password Firmware Network Time Halt Time Thu 10 Sep 2009 10 03 52 Current Time Thu 10 Sep 2009 10 04 14 Set Time Date 10 FO 2009 Time 10 4 ight 2008 Ateis International About Us Halt Time Displays the date and time of the last system halt that s mean when the VNB PMIP was powered down Current Time Displays the current date and time of the set on the VNB PMIP Set Time Write here the Date dd mm yyyy and time hh mm ss that you want to set in the VNB PMIP And then click on Apply to store the new parameters Intercom The PMIP can be used to make a direct call to another PMIP or VNB It is the intercom part of the PMIP In this usage the Vox net server does
57. B is available by the web navigator Simply write its IP address By default the IP is 192 168 0 159 Your PC must be on the same network that s mean an address like 192 168 0 x A http 192 168 0 159 Network In the web page of the PMIP VNB select the System tab A login and password is required By default the login is ateis and the password is ateis Select the Network tab to open this page ATEIS embedded HTTP server Home Status Config System Password Firmware Network Time MAC Address MAC address 00 22 13 F0 00 53 IP Settings Host name pmipd IP address 192 168 10 8 Network mask 255 255 255 0 Gateway 192 168 10 1 Apply new settings Copyright 2008 Ateis International About Us Write the whished IP address of the PMIP D 192 168 10 8 its subnet mask The gateway is automatically adapted Click L4BBly new Settings to store the new setting Command Select the Config tab then Command tab to open this page Vox net software supports the Vox net Mode only since version 2 3 0 If you are using an older version select Barix Instreamer Home Status Config System Config Logic Audio R5232 Decoder 1 Decoder 2 Encoder 1 Encoder 2 Command Mode vox net TCP port 12302 Options Fault if not connected Apply new settings The TCP command port used is always 12302 Notch the option Fault if not connected if you want the PMIP D displaying a fault when the comm
58. I configuration in your PMIP D When it s done take a look on the top of the window to see if the GUI configuration has been accepted or if the configuration is corrupted GUI Configuration ini file This is a resume of the GUI configuration For complete description please see the document ATEIS PMIP D GUI configuration 1 3 pdf You can download the latest version of this document here http www ateis international com The GUI on the touch screen contains 16 buttons and a status bar Several pages can be programmed Key 13 Key 14 Key 15 Key 16 Status Bar Each buttons is defined by e one function e one abel e one parameter Functions Parameters and Examples Chen one Be Dennis ZONESEL the matrix and code M1C1 M2C1 2 3 M4C10 Select the Matrix Zones destination Matrix 1 code 1 and Matrix 2 code 1 2 3 and Matrix 4 code 10 Set the message s priority O high priority 1 medium priority 2 low priority GONG no _ Start a microphone call with chime to the selected destinations no Lu Start a microphone call to the selected destinations MSGSEL the name of the message Gong Select the message Gong3Notes LISTENMSG no parameter Start the selected message listening on the client LISTENSTOP no parameter Stop the selected message listening on the client morar rora ES ET messe esto noparomer ep e selected a message VOUNe __noparaneter O mem Vome rora Pemewum ICOM IP address of the 19
59. In the main window of Vox net software click on the button k configuration Then select the tab Maintenance JE Vox Net Configuration Mode e Server C Dual Server Client of Vox net update You can download the last version of the software in our web site http www ateis international com PRODUCTS page i High Security Sound 3 y HOME VOX NET HOME PRODUCTS NEWS REFERENCES CONTACT TCP IP based Audio distribution system for Public Address and Evacuation EN 60849 DIVA SINAPS COMPACT SINAPS M XM SINAPS SWITCHING SINAPS with LAP VOX NET Vox Net responds to public address requirements and EN 60649 SECURITY MICROPHONES compliance local when several SINAPS systems need to receive ACCESSORIES AMPLIFIERS audio and be controlled trough a TCP IP network The system comprises A PC server conventional PC with the Vox Net SoftServer and the MP3 message Music files library It can contain thousands of LAP MP3 files for either background music or pre recorded messages to UAP be broadcasted into the TCP IP network Up to 10 simultaneous UAPg2 music message files can be broadcasted into the network MESSENGER SMART VOX LCH70 LOW CEILING HORN MAGELLAN COMPACT VOCALPOINT IGME f Vox net g Um Vox net software Select PRODUCTS and VOX NET and click on the Vox net software to download it An username and password is required Username ateisint Passwor
60. Intercom Call Intercom Ringing Intercom Communication Intercom Far End Talkin PMIP N PMIP K PMIP D If the device works this variable is 1 If the device fails or turns off the variable is 0 All the following variables take the value 1 when activate Logical Input 1 Value Logical Input 2 Value Audio Output 1 Audio Output 2 Intercom Call Intercom Ringing This variable is active if the logical input 1 is activated This variable is active if the logical input 2 is activated This variable is active if an audio signal is present on the audio output 1 This variable is active if an audio signal is present on the audio output 2 This variable is active all along an intercom call including ringing and error tones This variable is active when the intercom is ringing on Incoming call Intercom Communication This variable is active all along an intercom call without ringing Intercom Far End talking This variable The Device Faults All the following faults have the value 1 in normal state and take the value O when the fault activate Logical Input 1 State Logical Input 2 State This fault is active if the input 1 is monitored and if the relay is unconnected This fault is active if the input 2 is monitored and if the relay is unconnected Loudspeaker State Audio Decoder Time Out 1 Audio Decoder Time Out 2 Serial Gateway Connection This fault is active if the loudspeaker line
61. It will take the first unused message s number 1 and will be named as 001 RECORD 02 09 2008 15 58 33 Message count 1 Message number Bank number Message name register 1 1 1 001 RECORD 02 09 2008 15 58 33 register 2 register 3 A second message is recorded from the bank number 3 It will take the first unused message s number 2 and will be named as 002 RECORD 02 09 2008 16 01 57 All the message s parameters will be replaced in order Message count 2 Message number Bank number Message name register 1 1 1 001 RECORD 02 09 2008 15 58 33 register 2 002 RECORD 02 09 2008 16 01 57 register 3 If the message number 1 is deleted the parameters of all the messages will take the previous place in the registers However the registers that become unused won t be deleted The register Message count allows to know how many registers are really used Message count 1 Message number Bank number Message name register 1 2 3 002 RECORD 02 09 2008 16 01 57 register 2 002 RECORD 02 09 2008 16 01 57 register 3 As you can see the parameters of the message 002 RECORD 02 09 2008 16 01 57 took the place of the first one but it is still the message number 2 A third message is recorded from the bank number 1 It will take the first unused message s number In this example no other message has the number 1 so it will take it and will be named as 001 RECORD 02 09 2008 16 03 13 All the message will be
62. Music On Off Scheduler Write the hour of the beginning and the hour of the end of the time slot Validate the schedule by Enter of the keyboard 8 00 1 00 In this example two time slot are programmed from 8 00 to 11 00 and from 13 00 to 20 00 00 00 08 00 11 00 13 00 20 00 00 00 Music On Off Scheduler Add Delete pe 00 11 00 All the musical sources will thus be diffused from 8 am till 11 am They will be stopped between 11 am and 1 pm then again diffused till 20 hours This programming repeats every day without distinction Schedule Global music in the main window Then To set the global music scheduler click on the button select on the end of the list Setting LO player Select the musical source in the list For example we chose the source CD player Those both buttons able to adjust the audio level of the selected source LO player Click the button Outputs A new list will be displayed with all the existing remote matrices MMatrixl Matris The button Inputs is now renamed with the name of the selected source in this example CD player If a matrix is selected those both buttons appear they able to adjust the audio level of the selected matrix hl atris 1 To set the scheduler click on the button Program The window gets bigger with the scheduler part If this button is not displayed that is means the source selected before is not
63. Sites 4 Right click Default FTP Site and then click Properties 5 In the FTP Site tab fill the box as follow with the IP address of the remote server Control that the TCP port is 21 Eigenschaften yon Standard FTP Site E ee ix FTP Site Sicherheitskonten Meldungen Basisverzeichnis Verzeichnissicherheit Identifikation der FTP Site Beschreibung voxs net FTP Folder IP Adresse 10 130 83 100 TCP Port E FTP Siteverbindungen Unbegrenzt i verbindungen begrenzt auf 100000 Yerbindungszeit berschreitung in Sekunden 120 Protokollierung aktivieren Aktiwes ProtokollFormat W3C ermeitert Eigenschaften Aktuelle Sitzungen Abbrechen bernehmen Hilfe Click the Security Accounts tab Unselect the Allow Anonymous Connections check box That is because we want to unable all anonym user log on Click the Home Directory tab In the box local folder select the Vox net folder c Vox net Click to select the Read Log visits and Write check boxes if they are not already selected Eigenschaften von Standard FTP Site E 2 ed ES FTP Site Sicherheitskonten Meldungen Basisverzeichnis Verzeichnissicherteit Der Inhalt F r diese Ressource befindet sich In einem Yerzeichnis auf einem anderen Computer Verzeichnis der FTP Site Lokaler Pfad Cocer Durchsuchen M Lesen M Schreiben M Besuche protokollieren V
64. Starts VoxOnet amp VNB matrix complete procedure This quick start explains how to set up a Vox net system with one server and a VNB connected to a matrix For this example In the matrix we will define 4 zones In the Vox net software we want to have 4 buttons one for each IDA zones The server is able to send messages to each zones of the matrix We chose the following IP address all the IP address must be on the same network Vox net server 192 168 10 110 VNB 192 168 10 10 by default 192 168 10 159 Subnet mask 255 255 255 0 We chose an audio quality in SPEEX format frequency 16 kHz and baud rate 27 800 bit s Server PC Vox net GUI Messages Music library IP 192 168 10 110 Vox net network TCP IP Station 1 1 IDA4M IP 192 168 10 10 Vox Net Install Vox net software on the Vox net server PC Start Vox net software When required type the admin as password Network Click on Menu then Configuration Select the Network tab 1 x Poema conan UE streme 5xx Gigabit Controller Network card for Control IP Data and subnet mask Clients 1 92 168 10 110 255 255 255 0 Connection Hode Ok Server Dual Server Client of NI Lancel Write the IP address of the Vox net server in the both box If your PC has not already this IP address a button will appear able you to automatically set the this IP address to your PC Then unroll the
65. TYPE Matrice RES 168 10 159 IE YNE Modan IDAportl Mf l Matricel DEEE When this option is notched Vox Net understand that two audio channels are associated to one IP address The VNB provide 2 outputs audio channels so the channel 1 and 2 will use the IP address of the VNB number 1 and the channel 3 and 4 will use also the IP address of the VNB number 2 F yii With the VNB the option 77 must be notched To select channel 1 amp 2 or 3 amp 4 unroll Channel CHANNEL 142 ba ECS Setup NAME DECODER IP CHANNEL TYPE Matrice2 32 168 10 158 112 d F VHB Modan2 IDAport1 B i y E hm aa m A remote matrix can be linked to the network with 4 independent audio channels at most That s means 4 sources can be diffused simultaneously If just one channel is used only one source microphone message or music shall be diffused in the matrix at the same time To get the audio signal out from the network each matrix input is linked to the network thru a VNB with its own IP address The physical audio lines out from the VNB can be connected on any matrix input but one of them must be associated with the channel 1 If several channels are used they must be associated with channels in order These associations must be define in the matrix setup thru the PCIDA4XM software The VNB and extreamer can provide also the serial RS232 connection from the network So one of the VNB Extreamer must be link to the RS232 i
66. UI to open this page ATEIS embedded HTTP server Home Status Config System Audio Decoder Encoder Command Config Logic Vox Net Client Settings Vox Net Server Address 192 168 10 15 Options Fault if not connected Apply new settings GUI configuration export Export current configuration GUI configuration import Select file Import this INI file Parcourir Copyright 2008 Ateis International About Us Intercom Vox net Client Settings Vox net Client Address The IP address of the Vox net server Options Notch this option if you want the PMIP D displaying a fault when the server is not connected GUI configuration export Click on Export current configuration to open the configuration in your web browser I Mozilla Firefox Fichier dition Affichage Historique Marque pages Outils 7 Q A A http 192168 10 140 simplegui ini Microsoft Outlook We A Ateis International ATEIS Download ATEIS FRANCE ATEIS peo 2 http 192 168 10 140 simplequi ini Main NbPages 4 DisplaySourceName 1 AutoResetSelection 0 MsqQueued Attente MsgPartial Partiel MsgRejected Rejet FontLabel 18 FontSource 12 Pagel Funcl1 ZONESEL Labeli Matrix 1 zone 1 Param1 M1C1 And then save it on your PC File Save as GUI configuration import Click on to load a GUI configuration from your PC Then Click on IMPOR this INI tile import and activate the selected GU
67. Welcome ATEIS yg Thank you for choosing ATEIS Vox net system We hope you will enjoy using this exciting piece of technology as much as we enjoy developing and building it This HelpDoc file version is v4 This file has been written with the Vox net software version v 2 3 13 but the most of the information are valid for all versions We will do our best to update this manual when it is necessary But if you detect any mistakes or if you have any suggestions please send an email We hope that this HelpDoc will provide you all the answer you need However if you have questions contact us Summary SO A SUE o pg 1 A AP E era ere eee 8 Presentado gem reer oer ena cocoa 9 PS OI PR ER e o O XA 11 NE TWIT ISG IC UAT OI Maca mat n 11 NetWork a GC SI ae eee ne eng de ce 12 VOM MEE SO MALE E dada co es een ee a ee EE eee 13 ANENE g PR ER EEE EE EE E ETE E EE T 13 MPO Tes IMD ALO a E 16 do E en 17 to e o O A o 19 oi e ae ee a de D en de io 21 MV AN CIPI MESS POS BOK eee one ae ae a ee ot a tit ation 22 ADS RO BON a 23 Table of the reported AR ne ios 24 FURE 4 CU e E T ee 24 No faults are reported but an issue happened ss 26 ETO AN AO W E A E A 27 RCE A CN Sr E a og E E A E nse en arene 29 A Pe 30 A nn 31 PONTOT I aaa 33 COON NOS SO ar E E 2 des 33 Commands received from Matrix ii 33 Commands received from clients sise 33 Commands received from the server series 33 Keep alive c
68. _K has been sent to the Matrix 1 named Station 1 command gt destination IP address gt 192 168 10 10 means the command has been sent to the IP address 192 168 10 10 s udp 0 0 0 0 8010 gt 192 168 10 10 means the command s udp 0 0 0 0 8010 has been sent to the IP address 192 168 10 10 Commands received from matrix sender type sender name gt command Matrix 1 Station 1 gt ACK means the command ACK has been received from the Matrix 1 named Station 1 Commands received from clients Client data received sender name command Client data received Poste 1 MIC means the command MIC has been received from the client Poste 1 Commands received from the server Data received from server command Data received from server ETC means the command ETC has been received from the server Keep alive communications seen from the server These commands are able to control the connection between the server and the Vox net devices Server and coders VNB PMIP Barix protocol server gt VNB Coder connection 192 168 10 10 VNB gt server CMD1 gt lt ACK gt not visible for the moment Server and decoders VNB Barix protocol server gt VNB Decoder connection 192 168 10 10 VNB gt server CMD1 gt lt ACK gt Server and clients Client protocol server gt client ETC gt Client Poste 1 No answer is expected The TCP protocol is able to know if the connection is still active
69. ab Network to open this page Write the whished IP address of the VNB its subnet mask and the gateway Home Status Config System Network Password Firmware MAC Address MAC address 10 10 10 10 10 53 IP Settings IP address 192 168 10 110 Network mask 255 255 255 0 Gateway 192 168 10 1 Apply new settings Copyright 2006 Ateis International About Us Click LAPPIy new settings store the new setting Decoder Select the tab Config and Decoder to open this page Set the parameters as follow Home Status Config System Audio Decoder Encoder R5232 Command Intercom Audio Stream Decoder Settings Mode OFF Format Auto Detect Buffered Packets 1 UDP port 0 Address 0 0 0 0 multicast or source filter Apply new settings Copyright 2008 Ateis International About Us In broadcast mode don t write any IP address In multicast mode write the multicast IP address Click Apply new settings to store the new setting RS232 Select the tab Config and RS232 to open this page Set the parameters as follow ATEIS embedded HTTP server Home Status Config System Config Logic Audio RS232 Decoder 1 Decoder 2 Encoder 1 Encoder 2 Command RS232 Gateway Settings Mode TCP server Options WViFault if not connected IP port 12303 Destination Address 0 0 0 0 Baud Rate 38400 bps Data Bits 8 Stop Bits 1 Parity None Apply new settings Copyright 2008 A
70. al type of buttons Zone It able to select a logical area matrix couple code to make notice or display the occupancy in real time It s a graph element disposed on the main window It is associated with a code that may be assign to several zone in the remote matrix Group It able to select several zone buttons in the same time These zone buttons must be created before Bookmark It able to change the window arrangement to a predefined position It does not select any zone The server site must contain all the existing areas on the network The user site can contain only the button which will be useful not obligatory all the existing areas access limitation to specific areas Create buttons This window opened by the command buttons creation of the button MENU allow to create a variable number of areas or groups with a size which can be also configure Buttons creation Size of buttons Adjust size Set this size to all existing zones Creation of 1 button s Zone Group Select the type of button you want to create down left of the window C Zone i Group C Bookmark To adjust the size by put the mouse on the grey border and move the mouse in keep the left button pushed in All the button created will take this size a a Set this size to all existing groups Set this size to all existing zones Set this size to all existing groups This button allow it to fix the size of all existing buttons in the
71. and port is unconnected Click APPIY new settings to store the new setting Encoder Select the Config tab then Encoder tab to open this page Set the parameters as follow Home Status Config System Config Logic Audio Decoder 1 Encoder 1 Command Intercom LCD GUI Audio Stream Encoder Settings Mode OFF Target port 8010 Target Address 192 168 10 _ 255 Packets TTL 32 Packets Optimization Latency Format Speex Frequency 16000 Hz Bit Rate 8 27800 bits Apply new settings mo Copyright 2008 Mode OFF means automatic detection The Target Port and the Target Address are displayed in the Clients configuration of Vox net You have first to select the client s raw Prete ortn a emi FF PMIF VHE Sup MAME CLIENT P MICROPHONE IP PMIP_D 192 168 10 8 192 168 10 8 w i Lilient i 192 168 19 110 0 0 0 0 Stream to 192 166 170 255 Port 8010 In broadcast mode the Target Address is the broadcast address of your network In multicast mode the Target Address is the IP address of the multicast server it is incremented for each additional source You can choose between broadcast and multicast in the Audio tab The parameters Format Frequency and Bit Rate should be adapted with your network capacities See the manual for the network calculation ew settings to store the new setting PMIP D GUI configuration The Graphical User Interface of the PMIP D is
72. ation fails when the web page is already open this page will stay the same and won t inform the user It is necessary to reload the web page to see that the access to the VNB PMIP is impossible This fault is reported in the Vox net faults report box Mode The current mode of the VNB PMIP It displays the used communication protocol and the used port As the RS232 communication must be permanent to enable the server to ever control the VNB this mode still be unchanged while the VNB PMIP is connected State The current state of the VNB PMIP It display if the VNB PMIP is connected or not and display the IP address of the remote device generally the server N A not available waiting connected with IP address TX packets The number of packets sent since the connection with a Vox net client generally the server was established Even without user action one keep alive packet is sent each 5 seconds RX packets The number of packets received since the VNB PMIP since the connection with a Vox net client generally the server was established Even without user action one keep alive packet is received each 15 seconds UART to IP characters The number of characters sent since the connection with a Vox net client generally the server was established IP to UART characters The number of characters received since the connection with a Vox net Command client generally the server was established To lead the VNB PMIP
73. ational About Us Under mode select Raw UDP Uder Format you can either chose Auto detect or write the same audio parameters than in the VNB 1 Write the same UDP port as on the VNB 1 Here it was 8500 As we use the broadcast address there is nothing to write under Address Only if we use multicast address Click L PPIy new settings to store the new setting RS232 VNB2 Select the tab Config and RS232 to open this page Set the parameters as follow Home Status Config System Config Logic Audio R5232 Intercom Decoder 1 Decoder 2 Encoder 1 Command Vox net Encoder 2 R5232 Settings Mode UDP Gateway Options MF ault if not connected IP port 12310 Destination Address 192 168 10 10 Baud Rate 115200 bps Data Bits a stop Bits loo Parity None Apply new settings Copyright 2006 Ateis International About Us For the RS232 protocol we want a continuous UDP streaming So under Mode select UDP Gateway Write the same IP port than in the VNB 1 Here it was 12310 Under destination address write the IP address of the VNB 1 Notch the option Fault if not connected if you want the VNB displaying a fault when the RS232 port is unconnected The serial parameters Baud rate Data bit Stop bit and parity must match with the serial parameters in the other VNB 1 Click L4BBly new settings to store the new setting Command VNB2 Select the tab Config and Command to open thi
74. aturate incoming audio signal Outputs Analogue Attenuation The output attenuator It is used to decrease the audio signal coming from the network It is used to adapt the output signal with the device connected to the VNB PMIP Mute It able to mute the output audio signal Left Output Pilot Tone Notch this function to enable the pilot tone Pilot Tone Level Level of the pilot tone Pilot Tone Frequency Frequency of the pilot tone When any settings was been changed here don t forget to click Apply lto store the new setting in the VNB PMIP Audio Config In the web page of the VNB PMIP select the tab Config and Audio to open this page The PMIP is provided with an Automatic Gain Control AGC It adjusts automatically the gain of the microphone source by setting a target level A Gate is available to ignore the audio signal below a defined threshold Home Status Config System Config Logic Audio Decoder Encoder Command Intercom Audio Device lExternal Microphone External Speaker Microphone Settings Gain 20 0 to 59 dB AGC Max Gain 35 0 to 59 dB AGC Target Level 10 dEFS AGC Attack Time ms AGC Decay Time 200 ms Noise Gate Threshold 80 dB Noise Debounce 192 ms Signal Debounce ims Speaker Settings Attenuation 0 0 to 50 dB Apply Copyright 2006 Ateis International About Us Audio Device External Microphone Notch this option if you use the PMIP without it
75. ay ply new settings to store the new setting Select the tab Config and Encoder to open this page Set the parameters as explained below Home Status Config System Config Logic Audio Decoder 1 Encoder 1 Command Intercom Audio Stream Encoder Settings Mode OFF Target port 8010 Target Address 192 168 10 255 Packets TTL 32 Packets Optimization Latency Format MP3 Frequency 48000 Hz Bit Rate 192 kbitis Apply new settings Copyright 2006 Ateis International About Us Mode Select mode OFF In this mode the encoder is leaded by the commands received on the command port usually from the server Target The Target Port and the Target Address are displayed in the Clients configuration of Vox net A aban E i 4 xl Cheats Mate Aun Ta Acc harinas hiar ep Setup HARE ENT F BSP F EA F FERT Y Poste 1 hana 162168108 oan 100 Cat Dgli ns aed Deus traca lo 150 168 10255 Pot 8010 Stream to 192 168 10 255 Port 8010 biere Au a EN In broadcast mode the Target Address is the broadcast address of your network In multicast mode the Target Address is the IP address of the multicast server it is incremented for each additional source see chapter IP address and TCP UDP Port to understand the IP and port attribution Packet TTL Limit the Time To Live IP parameter Don t set a too little value Packet Optimization Chose between latency and Ban
76. buttons able to adjust the audio level of the selected source LO player By clicking on the button Outputs A new list will be displayed with all the existing remote matrices EMMatrix 1 CD player Matrix 2 0dB Matrice 1 CD player Cancel Save The button Inputs is now renamed with the name of the selected source in this example CD player The user has to notch the box of the matrix where the music has to be sent Now the source is displayed next to the matrix If a matrix is selected those both buttons appear they able to adjust the audio level of the selected matrix Matri Now the music will be diffused as predefined Import Messages You can import a message in Vox net from your PC It must be a MP3 file button to open this window jp Er CNE oe The imported files are always stored in the first bank import Click on the button This window will appear select your MP3 file to import Import from cusersiemmanuelimusickimeszagechimeimp31_evacuation en mp3 De 05 Evacuation EN mp3 wb_male mp3 J Music EJ MessagetChime Listen New Record Parameters Record Messages live To record a message you need an audio source and an encoder associated with a client of Vox net JB Vox Net Configuration a a iw PMHIPAYHNE Setup NAME CLIENT IP MICROPHONE IP PRIORITY Client 1 192 166 710 110 1 92 168 10 160 30 Cal
77. call Click on the button to stop the call Diffuse Call with Chime To be able to make a call the client must be associated with a microphone Zone selection In the buttons area of the main Vox Net window select the zones where you want to diffuse the call Start the call In the Configuration Audio several type of call or family can be defined each associated with a chime and a priority If only one type of call is available In the buttons bar of the main Vox net window click on the button to start the call with chime If more than one type of call are available In the buttons bar of the main Vox net window click on the button k the unrolled menu commercial Select the wished type of call to start the call with the associated chime security Informative During the call the zone button display a microphone icon with the source name and the microphone button becomes orange Stop the call Click on the button to stop the call Schedule Music For historical reasons there are two different music schedulers 1 The local music scheduler is accessible in the configuration menu It able to switch on and off the music directly in the matrices The music will be diffused in the pre routed zones of the matrices The cycle of this scheduler is 24 hours 2 The global music scheduler is accessible with the music button and able to program the music zone by
78. ces It activates and deactivates the music directly on the remote station matrices IDA4XM Concretely the Vox net server will just issue a command Music On Off to the remote matrices The user cans also do this function manually by activate or not the command Music On in the Menu Music On This control can also be accessible with the button Music on in the touch screen PA PSSDT Add To add a new time slot click on the button Add Delete To delete an existing time slot select the concerned line and click on the button Delete 08 00 11 00 Those both boxes allow to set the hour of the beginning and the hour of the end of the time slot Tools In the main window of Vox net software click on the button k i and chose configuration Then select the tab Tools In this window tree elements can be set the language the clock communication and the Modbus communication ay JE Vox Net Configuration x Clock Supervisory OPC and Modbus Paging Record Any OPC definition file _ Enabled 9600 Bds xl For 60 days le Even party Address 1 COM 1 Done at 0 hour s 8 bits Li ATU al 9600 Eds 1 stop bit le Even party Send request 8 bits 1 stop bit Language Langue English y Monitor Chent 1 Mode Server f Dual Server f Client of Language Language Langue English Dutch _ English Here is the languag
79. cket received since the VNB PMIP was switched from mode OFF to start the streaming Frames Decoded The number of frames received since the VNB PMIP was switched from mode OFF to start the streaming Encoder Encoder Config In the web page of the VNB PMIP select the tab Config and Encoder to open this page To enter in the Config web page a login and password is required By default the login is ateis and the password is ateis Home Status Config System Config Logic Audio Decoder 1 Encoder 1 Command Intercom Audio Stream Encoder Settings Mode OFF Target port 8010 Target Address 224 37 0 Packets TTL 32 Packets Optimization Latency Format Speex Frequency 16000 Hz Bit Rate 3 27800 bilis Apply new settings Copyright 2006 Ateis International About Us Mode three mode of encoder are available OFF The encoder will automatically switch to Raw UDP or RTP modes depending of the command received from the Vox net server Raw UDP The encoder will code any audio signal in its inputs and send it in User Datagramm Protocol to the network RTP This mode is not yet implemented It able to communicate in Real Time Protocol Target port The UDP port used to send the audio information to the network Target Address Packet TTL Format Frequency Bit rate Frequency The VNB PMIP will send the encoded audio to this IP address In broadcas
80. coder Command Intercom 192 168 10 110 Fault if not connected Parcourir GUI Copyright 2008 Ateis International About Us Under Vox net Client Address write the IP address of the Vox net server in our example it is 192 168 10 110 Notch the option Fault if not connected if you want the PMIP D displaying a fault when the server is not connected If you don t already have a configuration file then click on web browser Save it on your PC 2 Mozilla Firefox Export current configuration s Edition Affichage Historique Marque pages Qutils 7 c A httpy 192 168 10 140 simplegui ini Main NbPages 4 DisplaySourceName 1 AutoResetSelection 0 MsqQueued Attente MsgPartial Partiel MsgRejected Rejet FontLabel 18 FontSource 12 Pagel Funci ZONESEL Labell Matrix 1 zone 1 Parami MiC1 to open it on your y A http 192 168 10 140 simplegui ini Microsoft Outlook We 4 Ateis International ATEIS Download ATES FRANCE O ATEIS peo Open the configuration file ini Modify this text document as below to create your graphical user interface For the whole configuration please see GUI configuration In our example we just need to have one button to call the telephone Write the following raw Func1 ICOM Label1 telephone 38 Param1 192 168 10 159 Func1 ICOM gt means this button is an intercom key Label1 telephone 38 gt the label telephone 38 wi
81. computer you must use the Add or Remove Programs tool in Control Panel to install the FTP Service 1 Click Start point to Control Panel and then click Add or Remove Programs 2 Click Add Remove Windows Components 3 In the Components list click Application Server click Internet Information Services IIS but do not select or clear the check box and then click Details 4 Click to select the following check boxes if they are not already selected Common Files File Transfer Protocol FTP Service Internet Information Services Manager 5 Click to select the check boxes next to any other lIS related service or subcomponent that you want to install and then click OK Then Click Next 7 When you are prompted insert the Windows Server 2003 CD ROM into the computer s CD ROM or DVD ROM drive or provide a path to the location of the files and then click OK 8 Click Finish IIS and the FTP service are now installed You must configure the FTP Service before you can use it Configure the FTP Service Window server 2003 To configure the FTP Service to allow only Vox net server connections follow these steps y Internetinformationsdienste E 2d VOXANETSERY1 lokaler Computer El FTP Sites GB standard FTP Site A WYOXANETSERw1 lokaler Computer Ja IIS 6 0 1 Start Internet Information Services Manager or open the IIS snap in 2 Expand Server _ name where Server name is the name of the server 3 Expand FTP
82. crophone CD player tuner or audio server In this case only the audio input of the VNB is used Audio source CD player tuner gt O 0000 000 Microphone Vox netnetwork Vox Anetnetwork 2 As decoder It allows extracting the audio from the Vox net network As example to connect a speaker In this case only the audio output of the VNB is used 0000000 0600060060 SPA2120 2x120W o Vox netnetwork 3 As decoder for matrix It allows to connect a matrix to the Vox net network In this case the RS232 serial link is connected to the matrix One or two audio line can be connected to the matrix inputs Up to 4 with two VNB audio input of the matrix can be associated with the RS232 port That is mean that these input are lead by the server through the RS232 Vox netnetwork 4 As encoder decoder for matrix with remote access The remote access allows doing microphone paging from a PSSDT of a matrix to another matrix In this case the RS232 serial link is connected to the matrices The audio line of the matrix must be associated with the RS232 port That is mean that this audio line is lead by the PSSDT through the RS232 In the PSSDT side the VNB is used to encode the audio from the matrix to the network In the other side the VNB is used to decode the audio from the network to the matrix Paging microphone PSSDT audio audio RS232 d RS232 A zam VNB L VNB TCP IP
83. ct the wished zone a Set the current date and time as date and time from which the events are visible All Select all the event type Cancel Close the search window and forget the selection Close the search window and return to the history window with the selection When the history file is open in txt format the display is different The following table help to understand it DBXD Default Begin Matrix DEXD Default End Matrix DBCD Default Begin Client DECD Default End Client 25 Client absent 26 Micro absent 28 Command absent 29 RS absent 32 Matrix absent Menu In the main window of Vox net software click on the button MENU to obtain it New Site delete all the data concerning a site button on the main window and user matrix audio Configuration window tools Mew Site a Change Site download a site file already living on the hard disk open a Change Site dialogue box to select it Save Site Configuration 3 Save site save all the data actually settled on a site file open a dialogue Buttons creation box to enter the file name Place and size i Et de Configuration open the configuration window which allow settling the Background image general parameters of Vox Net Parameters display Don t ask Bep Buttons creation open the window which allow creating area button or 7 group button for the site exploitation see chapter Design Y Music On Memorize window Place
84. d ateisint Authentification requise Q Le site http wwew ateis international com demande un nom d utilisateur et un mot de passe Le j site indique Secure ccess Utilisateur HE Mot de passe ssssssss View Errors File Click on this button to open the Error File of Vox net This file is usefully for us when an issue has to be resolved on a system This is an example of a string we won t explain it Information Application C Vox Net vox net_errors txt Thread ID 3500 Logged 24 02 2009 17 21 33 IpGeneral InitComlp 380 10049 Address is not available from the local machine Reset Errors File Click on this button to erase all the data in the Error File of Vox net Network In the main window of Vox net software click on the button d and chose configuration Then select the tab Network This tab allows to set the Netcards used and to configure the dual mode mode with backup server In Server Mode Tools ACCESS Maintenance 192 168 10 110 255 255 255 IP Audio and subnet mask 1 92 168 10 110 255 255 255 0 Network card for Control 192 168 10 110 255 255 255 0 Broadcom NetXtreme 57xx Gigabit Controller IP Data and subnet mask Clients 192 168 10 110 2552552550 Cie chon f Dual Server C Client of In this mode there is only one PC used as server Vox net The used Netcard for control has to correspond with that of the Configuration Client The card u
85. d password will be required in the Vox net configuration Network window IIS and the FTP service Installation Window Vista Because FTP depends on Microsoft Internet Information Services IIS IIS and the FTP Service must be installed on the computer To install IIS and the FTP Service follow these steps 1 Inthe Configuration panel open Programs and functionalities 2 Click on enable or unable Windows functionalities 3 Inthe list under IIS service notch the both functionalities FTP console and server FTP Fonctionnalit s de Windows Fs es Activer ou d sactiver des fonctionnalit s Windows Pour activer une fonctionnalit activez la case cocher correspondante Pour d sactiver une fonctionnalit d sactiwez la case cocher correspondante Une case cocher pleine signifie qu une partie de la fonctionnalit est activ e FI Service de r plication DFS Windows FI Service d indexation CIRE Services d impression a il Services Internet IS Outils d administration Web a Mk Service de publication FTP Y 1 Console de gestion FTP FIRE Serveur FTP FILM Services World Wide Web a rie Services TCP IP simplifi s par exemple echo daytime etc Mm 4 Click on OK Configure the FTP Service Window Vista In the configuration panel open administration tools Open IIS6 Manager kd Panneau de configuration Outils d administration v
86. der or decoder The VNB PMIP is the TCP client In the other side of the network the codec must be set in TCP server The VNB PMIP use the UDP protocol to transport the RS232 IP port The TCP port used to send or receive the RS232 It s always 12303 Destination address Baud Rate Data Bits Stop Bits Parity Only in TCP client or UDP mode a destination IP address is required Mode TCP client Destination Address 0 0 0 Mode Destination Address 0 10 0 10 The baud Rate parameter of the serial RS232 protocol The number of data bits of the serial RS232 protocol The number of stop bits of the serial RS232 protocol The type of parity of the serial RS232 protocol When any settings was been changed here don t forget to click Apply new settings to store the new setting in the VNB RS232 Status In the web page of the VNB PMIP select the tab Status and Encoder to open this page Home Status Config System Decoder Encoder R5237 Command Intercom R5232 Gateway Status Mode TCP server on port 12303 State connected with 192 168 10 18 TX packets 30450 RA packets 11097 UART to IP characters 549332 IP to UART characters 5 833 Copyright 2006 Ateis International About Us This page gives the current state of the RS232 communication It only displays the connection with the VNB PMIP not the connection with device as matrix connected to the VNB Be carefully If the communic
87. dwidth Format Frequency and Bit Rate The parameters Format Frequency and Bit Rate should be adapted with your network capacities about the network see chapter Network about the audio quality see chapter Audio Codec Click L PPIy New Settings to store the new setting Select the tab Config and Command to open this page Home Status Config System Audio Decoder Encoder Command Intercom TCP Command Interface Settings Mode Barix Instreamer TCP port 12302 Apply new settings Copyright 2008 Ateis International About Us Vox net software supports the Mode Vox net with two audio channels only since version 2 3 0 If you are using an older version select Barix Instreamer with one audio channel The TCP Command port is always 12302 Click Apply new settings to store the new setting Configure a matrix In the main window of Vox net right click in a zone button of the matrix O cane IES Name one 2 _ Matrix i Zone n e Administration Pclda4 lt HM Ok Close Click on nes Heuer aS to open the PCIDA4XM software The matrices capacity may be increased by link one or several IDA slave units In the top of the window Configuration unroll the menu and select the total number of IDA and IDA slaves linked to the matrix If there is no slave select 1 IDA In the top left of the window Configuration unroll the menu and select Serial ports WFR INITIAL
88. e Ok p Server Dual Server Client of A Lancel ai First of all a different statics IP address must be set in each PC server To do this you can either configure yourself by the Network configuration of windows or write an IP in the box IP Audio and subnet mask and click on the button Click here to make this computer compatible with the recorded network configuration In this example the first PC has the IP address 192 168 10 2 and the second PC have the IP address 192 168 10 3 E Yox Net Configuration Y ee Network card for Audio encoders decoders 166 107 255 2 55 0 Broadcom Netttreme Giga bit Etherne IP Audio and subnet mask IP Backup Audio IP Shared Audio z 192 168 10 2 255 255 255 0 192 168 10 3 kaa 192 168 10 20 20 Network card for Control IP Data and subnet mask IP Backup Control IP Shared Control Clients f 92 166102 255 255 255 0 f 932 168 10 3 f 932 168 10 20 E Connection FTP Utsername Password Port Autora tees Rag anonymous 21 Joo od Test FTP on backup server Mode Ok p Server Dual Server Client of LA Lancel The card used for the audio encoding decoding can be different or identical than the card used for control By selecting your network card in the unroll menu its IP address will be automatically write in the both IP audio and subnet mask box IP audio and subnet mask If necessary write here the IP address and its subnet mask of the server PC that
89. e when an audio diffusion is requested the Extreamer will send the audio signal directly to the matrix without any control There is no waiting of confirmation to validate This is used to connect the VNB to a simple Amplifier for example The communication protocol used by Vox net to converse with remote matrix In this mode the server talk with the matrix on any RS232 port configured for MODAN protocol ONLY The RS232 port number one dedicated to the PCIDA4XM is unused by the server That means that this mode unable to administer the matrix thru PCIDA4XM software Modan IDAport1 identical to the Modan protocol but it allows using PCIDA4XM protocol for administration Therefore it can be used only on IDA Master Port 1 Modan2 IDAport1 Extended Modan protocol It s the same as above but in addition it able to T YHB control the matrix with priority management This protocol can be used only with the PCIDA4XM software version 2 8 28 or 2 8 43 and higher and only on Vox net version higher than 2 2 5 When this option is not notched Vox Net understand that one audio channel is associate to one IP address The old devices Extreamer Barix provide only one audio channel so if you use one don t notch this option Click on all the channel one by one and write a decoder IP address for each extreamer max 4 To select channel 1 2 3 or 4 unroll Channel CHANNEL L 2 3 4 Setup MAME DECODER IP CHANNEL
90. e cordless microphone for example Up to 8 digital messages can be downloaded and recorded as WAV files directly from a computer into IDA Four messages can be played simultaneously in different zones A security message is pre programmed in 4 languages One of the messages can be used as a chime for the PSS microphone 4 alarm inputs making it possible to obtain the pre programmed routings The 4 output contacts can be used to disable the 100 V line attenuators As an EN 60849 security system all SINAPS XM components and peripherals are monitored All incidents are recorded into a data file which can be consulted on the master module monitor display or on a PC Also any detected faults are signalled by a general fault output contact A local loudspeaker output enables selective listening to all the sources and the system s 100 V output signals The setup of SINAPS XM is realised through a PC computer and the PCIDA4XM configuration software Windows compatible Access can be password protected The routing and the level of the music sources can be controlled directly from the PSS microphones Furthermore SINAPSXM can be combined with the DA4SU when fault back microphone and a b wiring features are requested In comparison with SINAPS M SINAPS XM has following additional features 1 automatic Gain Control one sensing microphone PABFMP per IDA could be connected to one of the audio inputs It will allow IDA to make an intelligent measu
91. e fen tre partir d ici Supprimer Renommer Actualiser Propri t s Aide Set the parameters as follow TCP ftp port is 21 Connexions au site FTP Illimit es 8 Connexions limit es D lai d attente de la connexion en secondes Activer l enregistrement dans le journal Format du journal actif Write here the count used by FTP Autoriser les connexions anonymes Utilisez le compte d utilisateur Windows suivant pour l acc s anonyme Nom d utilisateur IUSR_EMMANUELPC Parcourir Mot de passe AA TT F N autoriser que les connexions anonymes Enable the access to this computer and select the Vox net folder Le contenu de cette ressource doit provenir de a Un r pertoire situ sur cet ordinateur R pertoire du site FTP Chemin d acc s local c Wox net Parcourir Lecture Ecriture Acc s au journal Style de la liste de r pertoire UNIX E Then in the ISS6 Manager right click on the FTP icon and select start Now go to chapter Control your FTP configuration in your web browser IIS and the FTP service Installation Window server 2003 Because FTP depends on Microsoft Internet Information Services IIS IIS and the FTP Service must be installed on the computer To install IIS and the FTP Service follow these steps NOTE In Windows Server 2003 the FTP Service is not installed by default when you install IIS If you already installed IIS on the
92. e selection for the Vox net software interface Tree languages are available German English or French When the selection is done the dialog box of the main window will be displayed in the selected language However Vox net has to be restarted to make actual the global display of texts in the chosen language Clock Clock COMI xl 3600 Bds 8 bits xl 1 stop bit Send request An external clock allowing the synchronization of date and the hour of the Vox Net server can be linked on a serial port of the server PC The server will synchronize all the client of Vox net Several parameters can be set here they must be in accordance with the PC who send the clock From the top to the bottom Serial port number Bitrate from 1200 to 38400 bauds Parity no parity even parity odd parity Number of data bits 7 or 8 Number of stop bit 1 or 2 The button Send request is able to generate a clock synchronization request Supervisory OPC and Modbus Supervisory OPC and Modbus OPC definition file Address 1 Any RTU bal 9600 Eds RTU ASCII le Even parity TCPAP 502 8 bits 1 stop bit Monitor 4ny The Vox net server can be connected to a third party control using the Modbus protocol The third party can be connected directly to the server PC using the serial port configured to work with strings in format ASCII or RTU By the other way Vox net can be controlled th
93. e when a variable or fault is active use the both connector CO and NO Device Global Status Logical Input 1 Value Logical Input 1 State l Logical nput 2 Value ILogical Input 2 State Ethernet Link Serial Gateway Connection Audio Output 1 Audio Decoder Time Out 1 udio Output 2 udio Decoder Time Out 2 Audio Input 1 lAudio Input 2 Command Interface Connection ntercom Call Intercom Ringing Intercom Communication ntercom Far End Talkin gt gt bP b VNB The Device Variables Device Global Status i none Device Global Status Logical Input 1 Value Device Global Status Logical Input 1 Value Logical Input 1 State Logical Input 2 Value Logical Input 2 State evice Global Status Logical Input 1 Value Logical Input 1 State Logical Input 2 Value Logical Input State D Logical Input 1 State Logical nput 2 Value lLogical Input 2 State Loudspeaker State Ethernet Link Push Button Loudspeaker State Audio Output 1 Loudspeaker State Ethernet Link A di Hoche Time ui Ethernet Link Audio Output 1 ant a 4 ee Audio Output 1 Audio Decoder Time Out 1 pla rel Audio Decoder Time Out 1 Audio Input 1 Command Interface Connection Audio Input 1 Command Interface Connection Intercom Call Intercom Ringing Intercom Communication Command Interface Connection Intercom Call Intercom Ringing Intercom Communication net Client Connection
94. e will be saved as auto parameters For the future uses of this message these parameters will be automatically applied when this message is selected The parameters are Destination The target zones Priority The message priority high medium or low If the message is not already associated to a predefined priority in the Configuration Audio Chime The chime s number associated in the Configuration Audio Bank The bank number which contains the message You can reset the auto parameter by deleting the messagename ini file in c Vox net Messages Diffuse Messages The messages can be classified in several banks each bank can be associate with a chime and a priority see Mechanism messages see Configuration window Audio Zones selection In the buttons area of the main Vox Net window select the zones where you want to diffuse the message Message window In the buttons bar of the main Vox net window click on the button to open the messages window 001 RECORD 15 09 2009 12 07 21 d ji jiti 002 RECORD 15 09 2009 12 08 12 Choice of the banks sssages 1S gt 11003 RECORD 15 09 2009 12 09 50 f 47 if more than one exist 004 evacuation en j Messages files importation scheduler option with chime only if the bank isn t Priority of the message associated with a chime any selected only if the bank isn t associated with a priority Message selection If there is only one bank defined in the Conf
95. eaded so under Mode select OFF Click L4BBly new settings to store the new setting VNB 2 receiver Configuration On the VNB which is the receiver we have to set the RS232 and the Decoder 1 parameters The configuration of the VNB PMIP is available by the web navigator Simply write its IP address A http 192 168 0 159 Network In the web page of the VNB PMIP select the tab System A login and password is required By default the login is ateis and the password is ateis Select the tab Network to open this page Write the whished IP address of the VNB its subnet mask and the gateway Home Status Config System Password Time Log Firmware Network MAC Address MAC address 00 22 13 FO0 02 E5 IP Settings Host name IDA2 E IP address 192 _ 168 10 111 Network mask 255 255 255 0 Gateway 192 6 168 10 A Apply new settings Copyright 2006 Ateis International About Us Click L PPIy new settings to store the new setting Decoder VNB2 Select the tab Config and Decoder to open this page Set the parameters as follow Home Status Config System Config Logic Audio RS232 Intercom Decoder 1 Decoder 2 Encoder 1 Encoder 2 Command Vox net Audio Stream Decoder Settings Mode Raw UDP Format Auto Detect Options Fault if time out Buffered Packets 1 UDP port 12310 Address 0 0 0 0 multicast or source filter Apply new settings Copyright 2006 Ateis Intern
96. eck the result displayed on the top The file was been imported if you see OK File imported Configuration saved Home Status Config System Config Logic Audio RS232 Decoder 1 Decoder 2 Encoder 1 Encoder 2 Command Intercom Configuration file export Export current configuration Configuration file import Select file Parcourir Import this configuration Copyright 2008 Ateis International About Us Logic Logic Config In the web page of the VNB PMIP select the tab Config and Logic to open this page Home Status Config System Config Logic Audio Decoder Encoder RS232 Command Intercom Logical Outputs Relay 1 Device Global Status Relay 2 none Logical Input 1 Mode Normally Closed Monitored Command to execute when ON OFF Fault Logical Input 2 Mode Normally Closed Monitored Command to execute when ON OFF Fault Apply new settings Copyright 2006 Ateis International About Us Logical Outputs Two relay can be use to control another external party Select in the unrolled menu which fault or variable will lead each one relay For each relay three connector are available normally close NC common CO normally open NO The mode of the relay depends of the wiring If you want the relay close in normal state and open when a variable or fault is active use the both connector CO and NC If you want the relay open in normal state and clos
97. ected inthe buttons area see How to Diffuse Call Messages Clicking on Message open the messages window able the user to chose a message and diffuse it or schedule it see Mechanism Messages see How to Diffuse Messages Reset Music In normal music mode this button open the Volume setting and music routing window In enhanced music mode this button able to select the music to be diffused in the zones selected in the buttons area see Mechanism Music see How to Diffuse Music History Clicking on History open the history window It allows seeing the history of Vox Net events see Vox net Software History Window Access Menu aT F In Vox net several user account can be predefine with different user authorization see Configuration window Access Clicking on Access open the Protected access window It able to change of user account The password is required By default two account are available an administrator account with ADMIN as password and an installer account with INST as password Protected access If the PC does not have a keyboard the yellow button able to open a virtual keyboard which can be easily used with the mouse or with a Touch screen Clicking on Menu open the unroll menu which able to have access to the configuration It contain also the buttons usefully to make the design of Vox Net see Vox net Menu Programs Box This
98. ed By default the login is ateis and the password is ateis Select the tab Network to open this page Home Status Config System Network Password Firmware MAC Address MAC address 10 10 10 10 10 53 IP Settings IP address 192 168 10 110 Network mask 255 255 255 0 Gateway 192 168 10 1 Apply new settings Copyright 2008 Ateis International About Us Write the whished IP address of the VNB its subnet mask and the gateway Click P ply new Settings to store the new setting Select the tab Config and Decoder to open this page Set the parameters as follow Home Status Config System Audio Decoder Encoder RS232 Command Intercom Audio Stream Decoder Settings Mode OFF Format Auto Detect Buffered Packets 1 UDP port 0 Address 0 0 _ 0 0 multicast or source filter Apply new settings Copyright 2006 Ateis International About Us Click L PPIy new settings to store the new setting Select the tab Config and RS232 to open this page Set the parameters as follow these parameters must match with the matrix serial configuration Home Status Config System Audio Decoder Encoder RS Command Intercom R5232 Gateway Settings Mode TCP server IP port 12303 Destination Address Baud Rate 38400 bps Data Bits a stop Bits 4 01 5 2 Parity None Odd Even Apply new settings Copyright 2008 Ateis International About Us Click L PPIY new
99. ed from mode OFF to start the streaming RS232 To lead the SINAPS matrices Vox net use the MODAN protocol It contain order to route the signal in the matrix and request to know the current states of the matrix These orders pass through the TCP IP network and are sent to the matrix by the serial RS232 link Vox net display in the faults box RS absent if the serial RS232 port does not works RS232 Config In the web page of the VNB PMIP select the tab Config and Encoder to open this page To enter in the Config web page a login and password is required By default the login is ateis and the password is ateis Home Status Contig System Audio Decoder Encoder RS 73 Command Intercom R5232 Gateway Settings Mode TCP server IP port 12303 Destination Address Baud Rate 38400 bps Data Bits B Stop Bits 0101 52 Parity 8 None Odd Even Apply new settings Copyright 2006 Ateis International About Us TCP server TCP client Mode The RS232 communication port can works in tree modes UDP OFF Unable the RS232 communication TCP server The VNB PMIP use the TCP protocol to transport the RS232 Select this mode if the VNB PMIP is used basically by Vox net The VNB PMIP is the TCP server and the Vox net server is the TCP client TCP client The VNB PMIP use the TCP protocol to transport the RS232 UDP Select this mode if the VNB PMIP is used in stand alone mode as simple network co
100. erzeichnisformat UNIX G f MS DOS Abbrechen bernehmen Hilfe 11 Click OK 12 Quit Internet Information Services Manager or close the IIS snap in The FTP server is now configured to accept incoming FTP requests Control your FTP configuration in your web browser Open your web browser as Explorer or Firefox Write in the address box ftp Pserver Where Pserver is the IP address of the remote server The username and password of your user account As example vnftp will be required If your FTP works you should see all the files contained in the Vox net folder of the remote server Configure Dual Server Mode FTP setting To allow the both Vox net servers to exchange their information you need to install and active the service File Transfer Protocol Please see the chapter How to Configure FTP for dual server mode FTP test Simply write the Username and the password of the FTP account created in the remote server FTP Utsername Password Port vnftp ateis 21 Test FTP on backup server Then click on Test FTP on backup server If the FTP works this window box will appear YouMNeL va FTP unfip ateis 21 Ok IP Address setting In the main window of Vox net software click on the button d and chose configuration Then select the tab Network see also chapter Mechanism Dual Mode An common IP address must be used as shared address it must be different than the
101. ested on Windows Vista professional service Pack 1 Windows Server 2003 service Pack 2 To install a Vox net server or user execute the file vox netxyz exe xyz is the software version First of all select your language and click Yes or Oui Installer Language EM Installing Vox Net i E Welcome to the Vox Net Setup Wizard This wizard will guide you through the installation of Vox Net It is recommended that you dose all other applications before starting Setup This will make it possible to update relevant system files without having to reboot your computer Click Next to continue In this box you can select the folder where the software will be install c Vox Net by default You must keep this folder And then click on Install EM Installing Vox Net Setup will install Vox Net in the following folder To install in a different folder dick Browse and select another folder Click Install to start the installation Destination Folder Space required 12 1MB Space available 26 1GB If you want that Vox net start automatically when the PC startup click on Yes or Oui E Installing Vox Net Ex kh E all Then click on Next and Finish EM Installing Vox Net Completing the Vox Net Setup Wizard Thank you for installing Vox Net For more informatiosn please check the ateis website at http www ateis comf If you want install a
102. et update View errors file Rezet errors file Mode Ok Per C Dual Server Clientof 192 168 0100 Al Lancel For details please see the other chapter Configuration Window on Server Maintenance Mechanism Priority Management The priority is a numerical value between 1 and 100 100 been the maximum used for security sources and 1 been the minimum and is used for music sources The rule is when to sources with the same priority try to take a zone the quickly take the zone By the first in first out logic Vox net Clients priority These priorities have to be set in the configuration window of Vox net tab Clients from the server PC Every call from a client will take its priority Message priority This priority is chose by the user when he selects the message from a bank If the bank is associated with a predefined priority the message will take this priority Otherwise the user can chose between three levels of priority lower normal or higher The priorities of banks and the priority of the three levels have to be set in the configuration window of Vox net tab Audio from the server PC Matrix priority Each physical matrix input has a priority The priority of an incoming audio signal call messages or music is limited by this input priority A paging microphone called PSM or a microphone console called PADT can be connected to each matrix units They have their own priority Generally the
103. etwork mask 255 255 255 _0 Gateway 192 168 10 1 Apply new settings Copyright 2006 Ateis International About Us Write the whished IP address of the PMIP D 192 168 10 140 its subnet mask The gateway is automatically adapted Click L4BBly new settings to store the new setting Intercom Select the Config tab then Intercom tab to open this page Set the parameters as follow Home Status Config System Config Logic Audio Decoder 1 Encoder 1 Command Intercom LCD GUI Intercom Settings Speex Quality 8 WiDenoise Echo Cancellation WIAGC Call Options llQueue Incoming calls 1 Forward All Forward on Busy Forward on No Answer Address Pilot Tone when Far End talking Frequency 0 Hz Attenuation 0 0 to 40 dB Auto Answer Apply new settings copyright 2006 Ateis International About Us Click L4BBly new settings to store the new setting PMIP D GUI configuration The Graphical User Interface of the PMIP D is done through the ini file In the web page of the PMIP D select the Config tab then GUI tab to open this page ATEIS embedded HTTP server Home Status Config Logic Audio Vox Net Client Settings Vox Net Server Address Options Apply new settings GUI configuration export Export current configuration GUI configuration import Select file Import this INI file Config System Decoder En
104. f selected the button will stay in the same place even if the user moves the main window To assign or take off areas with the Group button just click on the concerned areas with the left button of the mouse The areas related to the group are indicated by a straw orange color background A click on the button close will ask if this adjustments are to save except if the option Don t Ask of the Main menu is activated Set a Bookmark button The Bookmark allows changing the window arrangement to a predefined position because the main window of Vox Net can be bigger than what the screen can display To move the displayed part simply click in the unused surface of the window the grey surface where there is no buttons To define the parameters of the Bookmark buttons right click on the button you want to adjust This window will appears Darameters Name Bookmark 1 Bookmark 1 Move site and click on DK to record its position in the bookmark Button unable to move Name Write here the name oF the Bookmark Bookmark x The cursor able to set the parameters of several Bookmark one by one To define the window positioning of the Bookmark move the window to the wished position and then click on Ok and Close EAS o 1 et ds Bi O r r r r Now you can move the window positioning the Bookmark button will stay in its place Backgr
105. following parameters will be used in the FXO settings e VNB FXO The IP address of the VNB FXO 192 168 100 159 The phone number of the VNB FXO 21 internal phone number not necessary for the setting e Target Intercom The IP address of the target intercom 192 168 10 140 e Telephone The phone number of a remote telephone 37 internal phone number VNB EXO Configuration First of all power on the VNB connect it to the ethernet network and reach its web page You can either use AteisIPUpdate software or write its IP address in your web browser Default IP address is 192 168 10 159 A http 192 168 10 159 wo On the Home tab check the firmware type of the VNB It must be VNB TEL ATEIS embedded HTTP server Home Status Config System Firmware Product VNB TEL Version 0 9 0 Free Memory 4071356 bytes Network Select System tab A login and password is required By default the login is ateis and the password is ateis Then Select the Network tab to open this page Home Status Contig System Password Log Firmware Network Time MAC Address MAC address 00 22 15 F0 02 EC IP Settings Host name IP address 192 168 110 159 Network mask 255 255 255 _0 Gateway 192 168 10 AL Apply new settings Copyright 2008 Ateis International About Us Write the whished IP address of the VNB FXO 192 168 10 159 its subnet mask The gateway is automatically adapted Click Apply new sett
106. ges recorded live A message recorded live is a message recorded by the user from the message window The record is done by using an encoder as an Instreamer a VNB or a PMIP configured as client s microphone That is why the choice of the recording quality must be made directly in the configuration of the encoder see the chapter How to configure an encoder PMIP VNB The mp3 files are automatically numbered dated and stored in the folder c Vox Net messages Ordinateur E 05 C Vox Net di messages 1001 RECORD 02 09 2008 15 58 33 mp3 14002 RECORD 02 09 2008 16 01 57 mp3 14003 RECORD 02 09 2008 16 03 13 mp3 For messages recorded live from the message window the following rules are implemented o A new recorded message will take the first unused message s number o A new recorded message will be named with its message s number following by the date and time of the record o A new recorded message is associated with the bank from which it has been recorded in the messages window o When a message is deleted the parameters of all following messages will take the previous place in the registers and the registers containing its parameters won t be deleted For example this is the state of registers in the table of exchange Modbus when no messages are stored Message count 0 Message number Bank number Message name register 1 register 2 register 3 A new message is recorded from the bank number 1
107. have to set the RS232 and the Encoder 1 parameters The configuration of the VNB PMIP is available by the web navigator Simply write its IP address A http 192 168 0 159 Network In the web page of the VNB PMIP select the tab System A login and password is required By default the login is ateis and the password is ateis Select the tab Network to open this page Write the whished IP address of the VNB its subnet mask and the gateway Home Status Config System Network Password Firmware MAC Address MAC address 10 10 10 10 10 53 IP Settings IP address 192 168 10 110 Network mask 255 2655 255 0 Gateway 192 168 10 _ 1 Apply new settings Copyright 2008 Ateis International About Us Click LAPPIy new settings store the new setting Encoder VNB1 Select the tab Config and Encoder to open this page Set the parameters as follow Home Status Config System Config Logic Audio LATAY Intercom Decoder 1 Decoder 2 Encoder 1 Encoder 2 Command Vox net Audio Stream Encoder Settings Mode Raw UDP Target port 8500 Target Address 192 168 10 11 Packets TTL 1 Packets Optimization Latency Format Speex Frequency 16000 Hz Bit Rate 8 27800 bits Apply new settings Copyright 2006 Ateis International About Us Under mode select Raw UDP Chose an UDP target port Here we chose 8500 Under Target address write the IP address of the remote VNB 2
108. he MP3 message files library for pre recorded messages The MP3 music file library for background music The MP3 chimes library The server can contain a maximum of thousands MP3 files Up to 50 since version 2 3 10 simultaneous music message files can be broadcasted into the network The server can be rescue by a backup server it s the redundant mode e One or several client computer on which complies the Vox Net software configured in client Its interface is the same of the server without the settings Each client can be associated with a microphone and a loudspeakers desk e VNB Analogical audio coder and decoder interfaces toward IP used to pass on audio signals and serial control between matrices and the network The VNB has its own IP address e PMIP N Client microphone and speaker including analogical audio coder and decoder The PMIP N has its own IP address e PMIP K Client microphone with toggle button and speaker including analogical audio coder and decoder The PMIP N has its own IP address e PMIP D Client interface touch screen associated with microphone and speaker including analogical audio coder and decoder The PMIP N has its own IP address e External music sources As CD player or tuner connected to the network thru the VNB which have an IP address e Remote matrix Audio matrix SINAPS as IDA4 x m s With audio in outputs connected to the network thru a VNB The VNB provide also a serial link RS232
109. he network Network The VNB have its own IP address with subnet mask it is linked to the network by a RJ45 cable The VNB is configurable in a web interface reachable by its IP address Audio It has two symmetrical audio input channels and two symmetrical audio output channels The inputs allow encoding an external source and the outputs allow decoding audio coming from the network The input does not provide phantom power 48V The using of an electrets microphone requests an external pre amplifier Serial port RS232 It have also on serial RS232 ports one allow to encode the data to the network or to decode the data coming from the network depending of the configuration as TCP server or TCP client The VNB convert the RS232 data to the RS485 format adapted for the TCP IP network Connectors VNB front face VNB rear face AudioOut1 amp 2 Audioln1 amp 2 power led fault led E VNB 1 24 DC RELATA REL QURS TA AS 23 Al ALIDIO M TCP IP telephone AT a Vox net network power supply RelayOut1 amp 2 Logic In RS232 In our example we will use the VNB as decoder for matrix So we will only use the both audio outputs and the RS232 of the VNB We also won t use the telephone FXO interface Wiring TCP IP TCP IP YNE 24 DC RELAQUT REL OUTS MOLA RS ALENO OUT AUDIO M VNE 24 DC RELATA REL OURS MALA AS 25 eric ALDO M 24 VDC 24 VDC VNB 1 sender Configuration On the VNB which is the sender we
110. hock hazard results e When disconnecting the power cord from an AC outlet always grab the plug Never pull the cord A damaged power cord is a potential risk of fire and electrical shock hazard e Avoid touching power plugs with wet hands Doing so is a potential electrical shock hazard e Take care for correct polarity when operating the device from a DC power source Reversed polarity may cause damage to the unit or the batteries e Avoid placing heavy objects on power cords A damaged power cord is a fire and electrical shock hazard e Do not cut scratch bend twist pull or heat the power cord A damaged power cord is a fire and electrical shock hazard Ask your ATEIS dealer for replacement e Turn off the unit immediately remove the power cord from the AC outlet and consult your ATEIS dealer in any of the following circumstances Smoke odor or noise getting out of the unit Foreign objects or liquids get inside the device The unit has been dropped or the shell is damaged The power cord is damaged If you continue using the device fire and electrical shock may result e Do not drop or insert metallic objects or flammable materials into the unit as this may result in fire and electrical shock e Do not remove the device s cover as there are exposed parts inside carrying high voltages that may cause an electrical shock Contact your ATE S dealer if internal inspection maintenance or repair is necessary e Dono
111. iguration Audio simply select the message in the list AAA n r nr rs n If there are several banks click on the button bank and then select the message in the list to display the list of existing banks Select a Commercial Informative Rename Move Listen Hew Record au Parameters Chime selection If a chime is associated with the current bank notch the option With chime if you want to diffuse the chime before the message Priority selection If any priority is associated with the current bank select the priority in this unroll menu between Low Medium and High IM diun The real levels of these priorities are also defined in the Configuration Audio teaium Medium Pre listening Listen The button allows to hear the message if the client is associate with a loudspeaker before sending it Diffuse message Click on to start the message diffusion Click on to stop the message diffusion Diffuse Call To be able to make a call the client must be associated with a microphone Zone selection In the buttons area of the main Vox Net window select the zones where you want to diffuse the call Start the call In the buttons bar of the main Vox net window click on the button to start the call During the call the zone button display a microphone icon with the source name and the microphone button becomes orange Stop the
112. ings to store the new setting FXO Inthe web page of the VNB FXO select the tab Config and FXO to open this page A login and password is required By default the login is ateis and the password is ateis Home Status Config System Contig Logic Audio R5232 Command Intercom FXO FXO Interface Settings Phone call Target Intercom address 1921686 10 140 Intercom call Default Phone Number 37 Apply new settings Copyright 2008 Ateis International About Us FXO Interface Settings Phone call Target address Write here the IP address of the target intercom 192 168 10 140 Intercom call Default Phone Number Write here the phone number of the telephone 37 After change settings don t forget to click Apply new settings to store the new setting in the VNB FXO PMIP D settings PMIP D Configuration The configuration of the PMIP VNB is available by the web navigator Simply write its IP address By default the IP is 192 168 10 159 Your PC must be on the same network That means with an address like 192 168 10 x 192 168 10 159 rE Network In the web page of the PMIP VNB select the System tab A login and password is required By default the login is ateis and the password is ateis Select the Network tab to open this page Home Status Config System Password Log Firmware Network Time MAC Address MAC address 00 22 13 F0 02 EC IP Settings Host name IP address 192 168 110 1140 N
113. iority High Call station monitoring speaker This is the input priority It will limit the priority of the incoming audio line That is means that if the input used by the server has a priority of 20 when the server will send a message with high priority of 100 this message will finally has a priority of 20 Matrix faults description When a matrix is in fault its led fault lit and the LCD display the fault message descript below DISPLAY DESCRIPTION IDA LCD ONLY RESET SLAVES SLAVE ADDR SP OFF IDAs xx TEST CONFIG SITE INITIALIZATION RESET MONITORING Resetting slaves Indication of slave and master address SLAVE ADDR 1 is master address Monitoring speaker off number of IDAs in the system Site name in the configuration Initialization of the system Resetting monitoring status Validation for menu action Safety question after parameters changes YES OK NO ESC ARE YOU SURE Log event END or BEGINNING EVT DEF Log Event or Defect IDA STOP IDA START CHGE CONFIG RESET LOG CHGE MESSAGE IDA RESET IDA stopped IDA started Configuration has been changed Reset the log file Messages have been changed IDA have been reset IDA PSS STRING No fault status Immediate fault detected NO FAULT IMMED FAULT Ixxx SYNCHRO Audio codec interrupt issue on the DSP Ixxx RAM External RAM issue on the DSP board Ixxx LINK Link issue between master and slave Ixxx CLOCK Real Time Clock chip issue Ix
114. is a leading supplier of high quality VA PA audio equipment with distributors and subsidiaries in 23 countries throughout Europe States Middle East and Asia Since 1981 we are manufacturing reliable and high quality loudspeakers amplifiers and other audio components Our products are manufactured to ISO 9001 standards and when possible meet local requirements Vox net is a audio distribution system for public address and evacuation who rest on Ethernet IP network architecture It is able to make microphone call to send pre recorded messages or music through the network This software installed on several computers is associate with microphones speakers or external audio sources One computer must be used as Vox net server it contain the pre recorded messages and the music library It is able to do the Vox net configuration and settings On the other side several audio matrices SINAPS can be connected to this network They are lead by the server through the network using an RS232 serial protocol These matrices respond to public address requirements and EN 60849 compliance The VoxOnet network is composed of the following units e AnEthernet lP network of which the minimum guarantee debit depends of wishes performance e A server computer it s the heart of the system It contain The Vox Net software configured in server Its interface is able the user to broadcast messages call or music and to configure the system setting T
115. is short circuited or open Only on PMIP This fault is active if the decoder does not receive anything on audio 1 over the Time Out time This fault is active if the decoder does not receive anything on audio 2 over the Time Out time Only on VNB This is depending on the RS232 settings This fault will be ignored if the fault option is not activate or if the Mode is OFF R5232 Settings Mode TCP server Gateway Options YiFault if not connected This fault is active if the RS232 interface on port 12303 is not connected with the TCP server in TCP client mode or TCP client in TCP sever mode Command Interface Connection This is depending on the command interface settings Vox net Client Connection Ethernet Link Logical Inputs Mode Normally Closed Monitored This fault will be ignored if the fault option is not activate or if the Mode is OFF TCP Command Interface Settings Mode Vox net TCP port 12302 Options Fault if not connected This fault is active if the command interface on port 12302 is not Connected with the Vox net server Only on PMIP D This fault is active if the PMIP D is not connected with the server This fault is active if ethernet is not available Notch the option Normally closed if you want the relay closed in normal state and opened when a variable or fault is active Do not notch the option Normally closed If you want the relay opened in normal state and closed
116. l vit crime commercial remote 40 gt 0 5 5 0 5 5 0 5 5 0 0 0 0 1 2 0 Messages Classification s method of messages Vox Net manages the messages with several parameters e The name of the message e The number of the message e The bank number or library in which the message is associated e The auto parameters destination chime priority library If there is enough hard disk space a maximum of 255 messages can be stored And maximum number of banks is 9 Several protocols are used to communicate with the server The protocol of communication CLIENT used between the clients of Vox net and the server refers to messages by using their name The protocol of communication MODBUS used between the Vox net server and thirds party refers to messages by using their number MODBUS use a table of exchange This table contain several registers concerning the messages A register Messages Count contain the total numbers of messages Vox Net can works with a maximum of 255 messages For each message the table of exchange contain two registers one for the message s number and a second for the associated bank s number The messages are numbered automatically but you can choose the number of a message by yourself just write the number on the first characters of the message name The table contain also a register which allows making the link between the names of messages and their number Numbering of Messa
117. lace the buttons in the Vox net area as you want Then click on Menu renamed Place then unselect place and size Right click on the first button It opens this window Parameters Matrix Logical Zone 2 L Administration Pclda4 M Ok Close Here you have to define a destination for each buttons In our example we have one matrix number 1 which has four zones number 1 2 3 and 4 Change Site Save Site Configuration Buttons creation Place and size Buttons destruction Background image Parameters display Don t ask Beep Music On Memorize window Dialogs display Close Vox Net Stop this computer The rolling bar allows moving between the buttons For each button define a name a matrix destination and a zone destination Don t forget to type on ENTER when you write something On the first button chose matrix 1 and logical zone 1 For the second button chose matrix 1 and logical zone 2 For the third button chose matrix 1 and logical zone 3 lt Vox Net gt 2 3 13 Server E g A For the fourth button chose matrix 1 and logical zone 4 VNB Presentation The VNB is an analogical coder and decoder interfaces toward IP used to pass on audio signals and serial control through the network Network The VNB have its own IP address with subnet mask it is linked to the network by a RJ45 cable The VNB is configurable in a web interface reachable by
118. le message ini is created as soon a parameter is set e The music parameters are copy in the both servers when the user saves the music setting in the music window If the user quit the music window without saving before the setting will be lost during the next server switching The information about all parameters and configuration are regularly exchange between the both servers and automatically updated When the user save the configuration When the dual mode settings are done see Configuration window on server Network Vox Net will closes the software on the both server and start Vox net again in only one server During the starting it will search on the Network if another server is already working If it does not find another server it will begin as active server Toret 5004906 Connecting to active Server 5091156 No active server startup APA Switch Vox Het Servers al Ea trier ea a n r a lt en a Leg Bien E Ge Minis ss he un il Fe A ee aid Sao EL ao EC En Then start Vox net in the second PC It will search if an active server is already in the network When it will find an active server it will start as backup server YouaNet 1115141 Connecting to active server 11181575 Connected to active server 111515758 Send BKF 11151578 Receive ACT Close Switch
119. lephone and PMIP D with VNB FXO PABA We will set an intercom system between a standard telephone and a PMIP D The VNB FXO is simply used as network gateway D Telephone Target Intercom ge number PMIP D with Intercom GUI P address 192 168 10 140 Phone network Pele automatic VNB FXO branch exchange J phone number gt sb Sa RJ11 To e IP address R45 192 168 10 159 fox net When the user uses the telephone to call the VNB FXO by typing the phone number of the VNB FXO the VNB FXO will forward the call to the target PMIP D intercom On the target side the user will respond to the call on the PMIP D intercom by pressing the key on the LCD touch screen Then the both users one on the telephone and the other on the remote intercom are able to discuss together The user can also call the telephone from the PMIP D by pressing a virtual dedicated key If the intercom is not set in auto answer mode The user needs keys to start call or answer Those keys could be e Physical keys on the device PMIP K telephone e External keys with contact buttons PMIP N VNB to configure the key see Logic Config e Virtual keys on the LCD touch screen PMIP D to configure the key see GUI configuration This kind of control is described below In our example we don t use the auto answer mode and our intercom is a PMIP D with only one key to call the telephone through the VNB FXO The
120. ll be displayed in the key Param1 192 168 10 159 gt Write here the target IP address here it s the IP of the VNB FXO because the VNB FXO is the gateway to the target telephone The number 1 means the first key on the PMIP D screen Change the key number as you want Save your GUI file and close this document When your GUI is done go back to the PMIP D web page the click on GUI configuration import Parcourir and select your new GUI configuration from your PC Then Click on Import this INI file to import and activate the selected GUI configuration in your PMIP D Now the system is ready VNB VNB continuous streaming complete procedure This quick start explains how to set up a system with to send audio and RS232 data from one point to another point by using two VNB For this example We chose the following IP address all the IP address must be on the same network VNB 1 192 168 10 10 by default 192 168 10 159 VNB 2 192 168 10 11 by default 192 168 10 159 Subnet mask 255 255 255 0 We chose an audio quality in SPEEX format frequency 16 kHz and baudrate 27 800 bit s About the RS232 we chose a baudrate of 115200 bit s 8 data bits 1 bit stop no parity VNE 1 VNE 2 IP 192 168 10 10 IP 192 168 10 11 continuous stream LPP network VNB Presentation The VNB is an analogical coder and decoder interfaces toward IP used to pass on audio signals and serial control through t
121. low encoding external sources and the outputs allow decoding audio coming from the network The input does not provide phantom power 48V The using of an electrets microphone requests an external pre amplifier It have also on serial RS232 ports The VNB is a gateway between the ethernet network and the serial link It encodes the data to the network and decodes the data coming from the network The VNB convert the RS232 data to the RS485 format adapted for the TCP IP network The VNB have its own IP address with subnet mask it is linked to the network by a RJ45 cable The VNB is configurable in a web interface reachable by its IP address VNB front face VNB rear face power led fault led VNB 24 DO RELOUTI ABOUTS LA R252 AUDIO CUT AUNDE ipo 9 Td ml ALS RJ45 Ethernet network TCP IP The power led light when the VNB is powered with a 24VDC power supply The fault led light when the there is a fault or to display the start up state The fault can come from e RS232 port not connected if this option is notched e command port not connected if this option is notched e logical inputs disconnected if monitored e ethernet link absent When the VNB is powered on the fault led blink two times e First blink when the Bootloader is loaded e Second blink when the firmware is loaded Concretely the VNB is used in the following cases 1 As encoder It allows connecting to the Vox net network an external sources as mi
122. n window Audio When any settings was been changed here don t forget to click Apply new settings to store the new setting in the VNB PMIP Decoder Status In the web page of the VNB PMIP select the tab Status and Decoder to open this page Home Status Config Decoder Encoder R5232 Command Audio Stream Decoder Status Mode OFF State N A Format Bit Rate 64 kbit s Frequency 24000 Hz Channels 2 Packets Recewed 210 Frames Decoded 1464 Copyright 2006 Ateis International About Us This page gives the current state of the VNB PMIP decoder Mode The current mode of the VNB PMIP If the VNB PMIP is configured in mode OFF this mode status becomes Raw UDP or RTP when the VNB PMIP receives the command to start the decoding OFF Raw UDP on port UDP port from IP address RTP State The current state of the VNB PMIP It display if the VNB PMIP is connected or not and display the IP address of the remote device generally the server N A not available waiting streaming from IP address Format The current format of the incoming audio MP3 or Speex automatically switching in mode Auto Detect Bit rate The current bit rate of the incoming audio Which is automatically detected by the decoder Frequency The current frequency of the incoming audio Which is automatically detected by the decoder Channels The number of active audio channels Packet Received The number of pa
123. nd chose pz Vox Net Configuration Administrator Access limited to 15 mnis 72277 al Authorizations for Users 1 INST Add Delete M Autol og Record message i Site parameters w YWolume setting Security key present for 20 matrixes 4 4 Play message W Zone parameters Ww Music Setting x Delete Message Ww Local music M Access x Priority message Ww Window W Microphone call a Message scheduler i Maintenance x Message parameters i History x Listen Message i Close x Yolume Source 5P W Stop computer Mode Ok f Server i Dual Server Client of MN Lance SN Access limited This parameter limits in time the access to the Vox net software when no action is done It can be set between 1 to 30 minutes This counter is reset as soon as any action is done by the user keyboard or mouse action Access limited to 15 mnis 4 E This parameter can be inhibited by set the cursor in the minimum the name of the box will appear as Unlimited access Unlimited access RIT pl Administrator Administrator This administrator code is unique and allows the user to having an unconditionally access to all functionalities By default the administrator code is ADMIN It can be modified here by an alphanumerical code This code must be of 1 to 10 characters to the maximum There is not difference between capital and minuscule It can contain figures and other characters amp
124. nd record OPC click on Yes or Oui EM Installing Vox Net EER Would you like to install and record OPC It will be necessary to enable P security options defined by DCOMCNFG If you want open the Vox net software now click on Yes or Oui If the software cannot be open or open in a empty configuration or if on a client PC a message tell you that you have not the rights and you are sure that the USB key is present on the server PC then open the file c Vox net voxanet ini E vox netiniint The file wrote next to Fichier must exist If not change it to a valid file Close and save the file Fichier Edition Format Affichage site Fichier voxanet demo vns Dossier c vox net Client 0 Height 9360 Dialogs To 815 Left 11265 options Pasquestion 0 Langue vnEnglish Ing HistDialogs 0 Messages Top 3450 Left 10522 Audio Top 60 Lert 3008 F When Vox net is loaded an access password will be required The yellow box able to open the virtual keyboard in case where you use a touch screen panel Log in the password by default admin give you all the rights or inst with restricted rights Protected access Windows NT To run under windows NT Wincore exe must be installed before MP3 files importation Copy in the folder c Vox Net Messages the MP3 file that you will use as pre recorded messages and the MP3 file that you will use as chime If yo
125. nde a rece a E e E S a A 79 MIOS SON C OS r une E E E N A E E eee 79 Externa MUSIESQUECES 1d T E do lister 79 Internal MUSICSOUTESS A iia 79 MUSIC MOE e e e ey o Ses DA A AT EAEE E es 80 Enhanced Music MO ollo ns ea ee ol 80 Normal MUSICOS aci 81 Dual WIOGE Be Backup Server a 83 AUTO CON dodo O 87 SPEED ia 87 MPE RP T E A O ete ian cnn EE EE 87 PAddressand TCP UDP POS cenin E a de crea 88 Streaming IP Address and UDP Ports in Broadcast mode 88 Streaming IP Address and UDP Ports in Multicast Passif Actif mode 88 A a A 89 reste DUTON ais 90 Place a BUTTON iia 91 Delete DUO PR sen sinniaedeeo deugantmenbee es aisacavaaiaieteedd naga hoanbenovaniancaaooeaceeustaucsaioneniees 91 SI ah Aare ON PU 0 9 odas 92 SEE A GPOUIO DUNO A NT RP Rs oases RS Nr ns NA 93 Seta BOOK Mark DUO at eS 94 Background Mae ii ads 96 HOW TO PRE ET x lannesatueatiets 97 DTT USC MUSIC Re E Aie tn ee lan ess 97 Nenhanced Music Mod ad 97 cc PP de io ne ermine id nie 97 MPOC MESSI OS ade 99 Record Messages iVe a A A ie 100 A a A A eokeusaneesacassee 100 ROCOCO eana O A a a dite 101 CONSUMOS ES a a ia 102 DISNEI teen 105 Diffuse Call ciao 107 Dittuse Call With CAME asado ia crio 107 DCS CU MIS aaa 108 Senequie Local MUSIC sica 109 seneaule Global MUSIC acacia oral oiaciais 111 Senequie Mess ass ta ren lee ne dorer ee de rate aude ot on ba et 114 Contisure a deconer VNB sees de ia oceania conh tea cameaice yeas 117 Configure an encoder VNB 7 PU IPod
126. ndow Network in dual server mode The Vox net software must be started on the both server but only one is really active at the same time The second stand in backup state Our advice is to make the whole configuration in one server to copy it to the second and to start the both servers in active and backup state DUAL SERVER LAWS e Since the servers are working in dual mode the whole configuration file will be saved on the both server when the user save the configuration If don t ask is selected Vox net saves the file without asking the user e The history file is automatically copy in the both servers every time an event or fault is detected e The parameters in the configuration menu are copy in the both servers when the user quit the configuration window and save If don t ask is selected Vox net saves the file without asking the user e The live recorded messages will be automatically copy in the both servers e The pre recorded messages manually imported in the message windows by the user are automatically duplicated on the both servers e The internal music files manually imported in the configuration Client windows by the user see Music internal are automatically duplicated on the both servers e The messages parameters auto parameters message number priority chime associated bank associated are copy in the both servers in the file message ini when the user quit the messages window The fi
127. nformations Firmware The device name VNB PMIP and which firmware version is already installed Libraries The communication protocols libraries Hardware The references manufacturer and device of the SPI flash and NAND flash File System Display the memories spaces free and total The boot memory contain the BFModule Boot loader The flash memory contain the firmware Config Config In the web page of the VNB PMIP select the tab Config and Config to open this page This page allows you to store your entire PMIP VNB configuration on your PC Home Status Config System Contig Logic Audio Decoder Encoder R5232 Command Intercom Configuration file export Export current configuration Configuration file import Select file Import this configuration Copyright 2006 Ateis International About Us Export current configuration Able to store the current configuration on your PC A floating window will open asking you if you want to open the configuration or store it If you chose store the configuration will downloaded as a web file on your PC You will find it in your files downloaded folder A Contig VNE Click here to open a window able you to search and select the configuration that you wish import mponr this configuration E L When the file to import was been selected click here to load the new configuration into your PMIP VNB After importing the ch
128. no gt Mecl1 2 07 11 2008 11 53 42 2 Event End Message played piano 07 11 2008 11 53 45 2 Event Begin Microphone Call Client 1 MiCz 07 11 2008 11 56 25 2 Event End Microphone Call Client 1 07 11 2008 11 56 39 2 Event FTP on backup server DELETE messages blues OO1 prg 07 11 2008 11 56 40 2 Event FTP on backup server DELETE OW 192 168 10 19 07 11 2008 11 56 40 2 Event Program deleted blues 01 00 235 15 00 15 1234567 N101 2 1 90 50 1 07 11 2008 11 56 46 2 Event FTF on backup server DELETE messages piano OO1 prg 07 11 2008 11 56 47 2 Event FTP on backup server DELETE OW 192 165 10 19 07 11 2008 11 56 47 2 Event Program deleted piano 01 08 25 23 00 15 12394567 Me2C1 2 1 90 50 1 07 11 2008 12 09 13 2 Event End Local music 07 11 2008 12 09 19 2 Event FTP on backup server COPY C VoxbNet vnsite tmp voxanetservl vns 07 11 2008 12 09 20 2 Event FTP on backup server COPY To 192 165 10 129 07 11 2008 12 10 32 2 Event Begin Microphone Call Poste 1 gt 7 MiCE 07 11 2008 12 10 45 2 Event End Microphone Call Poste 1 07 11 2008 12 10 49 2 Event Begin Message played blues gt Mice 07 11 2008 12 10 51 2 Event End Message played iblues 07 11 2008 13 00 00 2 Event Begin Local music 07 11 2008 13 35 29 2 Fault Begin MICRO absent Poste 1 07 11 2008 14 00 00 Event End Local music 07 11 2008 14 04 01 2 Fault Begin Backup server not connected 07 11 2008 14 06 00 2 Fault End Backup server not connected 07 11 2006 15 20 36 2 Fault End MICRO
129. nput of the matrix The server will use it to control the matrix by Modan protocol Zone 1 Zone 2 Zone 3 Zone 4 Zone 5 Zone 6 aes ET fe A Zone 7 fe o Zone 8 Zone 9 SS men wet Zone 10 9 sou 2 d E 4 3 Zone 11 as ee D eee Zone 12 Matrix Configuration The configuration of the matrix is done through the PCIDA4XM software This software must be installed before in the server download available on www ateis international com By clicking on the button Setup you can have a quickly access to the PCIDA4XM software through the Vox net network The first time a pre configuration of the matrix and the VNB must be done to able the communication between PCIDA4XM software and the matrix see Matrix SINAPS Matrix configuration AB Vow Net Configuration Charla Habtines aho AE ES El dur dis RARE I TOHA T CHARMEL Matice 2 1 168 10 1 HN Chanel lo 1 Hatrice 1 TLS Les LO 112 be Le 21 Loo od Audio In the main window of Vox net software click on the button k d and chose configuration Then select the tab Audio Message bank association audio parameters and several Vox net functionalities can be set here pz Vox Net Configuration HEL RAT SEE 2 Instant Record Auto Reset Selection Record Max 5 minutes Stop messages if owner W Enhanced Music Mode Wait Message 5 seconds
130. ommunications seen from the server ss 34 Mode SAR NE een rerar tnt neear eee Te tnCnar er nero enone ake re ete eae er ey eres eee ee tae ree eee aera ere 35 Configuration Window ON the SELVel sssccccsseccccessccccenscccceeseccceuseceeceuecceseusecessuecesseneceeseuseeessusecessensces 36 CR nn E 36 CCE ceauatamase E N E 37 Coder Decoder Configuratio N caidas 40 o A A A AN 41 MatDeDara meters aliadas 42 Matrix CONTISUTATIOMES LE A nace nee ee aes edit 44 PUN RSS AR RS le it nat D ie eel eat ee 45 OO a a a ene teecaunesoade ane a savenastunte 52 ACCESS OO 55 Description OF ACCESS TIEM S rira a A A ia 57 A en a Sn A de ee de ee de ose due 60 NETWORK telas 62 MYT SERVER Mode RS E ni tend tete a is 62 H Dual Server Mode RE 64 Configuration Window oma Client scans 67 ACCESS e ao oT CO ng on ae 68 MAlATenanee ss Re Sn nd cn 69 M CANISME RS a an ie te nana data bust ten aon di OR on a ile dique 70 Priority Management ARR MN NT rara rules 70 VOX Net Clients Priority siesta de AA NE nt 70 Message POr ura aa 70 MANO ER a A 70 A AS a de ee a nt a ne 71 NICSS ARS NS RS A Ait s 72 Classification s method of MESSAGES sssecccesseccecessccecesececeusececeeeecceseuseceseusecessugeceseegeceessusesetseneees 72 N mberin ot Messages recorded Wei alas 72 Numbering of pre recorded Messages iii indiennes 75 NUMBERING OF BANKS ER de id N 77 Numbering Of CRIME ARS RS ES 77 Auto PAFAME T soea e E O 78 MUSIC ct do
131. on 6 Loop Current 25 3 mA Line Voltage TV Copyright 2008 Ateis International About Us This web page is mainly used by us for debugging For your information there is a problem if the Line Side Device ID is different than 3 or if the System Side Revision is different then 4 If the phone line is physically connected the loop current should be near from 25 mA and the line voltage near from 7V Matrix SINAPS The SINAPS range are Audio matrix system for Public Address and Evacuation SINAPS XM responds to public address requirements and EN 60849 compliance for medium and large scale installations It comprises the cascading of a master module DA4XM and one or several slave modules DA4XMS This module assembly extends the system s capacity to 256 inputs x 256 outputs Each module unit houses audio digital signal processing DSP a matrix a digital message player amplifiers monitoring with switchover to backup amplifier and loudspeaker lines monitoring Each module can support 1 PSSxxDT security microphone console and can process and route another four O dB audio inputs into 4 different zones Each channel is fitted with volume controls equalizers and a programmable delay Each O dB input feature and can process and route another four O dB audio inputs into 4 different zones Each channel is fitted with volume controls equalizers and a programmable delay Each O dB input feature contact VOX activation ideal when using th
132. open this page Home Status Config System Decoder Encoder RS232 Command Intercom TCP Command Interface Status Mode Barix Exstreamer on port 12302 State connected with 192 168 10 18 Keep Alive 71 Commands 46 Errors 14 Copyright 2006 Ateis International About Us Mode The current mode of the VNB PMIP It display the used communication protocol and the used port To enable the server to ever control the VNB PMIP this mode should be permanent State The current state of the VNB PMIP It display if the VNB PMIP is connected or not and display the IP address of the remote device generally the server N A not available listening for incoming connection connected with IP address Keep Alive The number of Keep Alive packets received since the connection was established Commands The number of Commands packets received since the connection was established Errors T he number of wrong packets received System To enter in the System web page a login and password is required By default the login is ateis and the password is ateis System Password In the web page of the VNB PMIP select the tab System and Password to open this page Home Status Config System Password Firmware Network Time Change user settings Login Password Confirm Apply new settings ight 2006 Ateis International About Us To enter in the Config and System web page a login and passwo
133. or high quality speech and low bit rate To achieve this the codec uses multiple bit rates and supports wideband 16 kHz sampling rate Designing for Voice over IP VoIP instead of cell phone use means that Speex must be robust to lost packets but not to corrupted ones since the User Datagram Protocol UDP ensures that packets either arrive unaltered or do not arrive at all MP3 The MP3 is a digital audio encoding format using a form of lossy data compression It able to greatly reduce the amount of data required to represent the audio recording and still sound like a faithful reproduction of the original uncompressed audio for most listeners An MP3 file that is created using the mid range bit rate setting of 128 kbit s will result in a file that is typically about 1 10th the size of the original audio source An MP3 file can also be constructed at higher or lower bit rates with higher or lower resulting quality The voice need a lower quality to be intelligible an MP3 encoding at 32 kHz and 64 kbit s can be enough to reach a very good quality To get a good music quality the minimum bit rate required is 96 kbit s in mono IP Address and TCP UDP Ports All the command and control use the TCP protocol more secure The audio streaming use the UDP protocol steady stream The TCP Command Port is always 12302 The TCP RS232 Port is always 12303 The UDP Streaming Ports are described below Streaming IP Address and UDP Ports
134. ou can see in real time the value and state of each Variables and Faults For the details of these variables and faults please see the Logic Config VNB Audio Config In the web page of the VNB PMIP select the tab Config and Audio to open this page To be compliant with the norm when a VNB is used to send audio to a SINAPS matrix the audio lines must be monitored By monitored we mean that the matrix hears the incoming audio signal and display a fault if there is no signal To do this when the audio line is unused the VNB send a Pilot Tone with a defined frequency This pilot tone is only available on the left output output 1 Home Status Config System Config Logic Audio Decoder Encoder RS232 Command Intercom Left Audio Input Analog Gain 0 0 to 59 db Input Level OdB Right Audio Input Analog Gain 0 0 to 59 dB Input Level OdB Left Audio Output Analog Attenuation 0 0 to 50 dB Mute El Pilot Tone FA Pilot Tone Level 15 60 to 14 dBu Pilot Tone Frequency 20000 0 to 24000 Right Audio Output Analog Attenuation 0 0 to 50 dB Mute A Apply Copyright 2006 Ateis International About Us Inputs Analog Gain The the gain of the pre amplifier of the audio input used to increase the incoming audio signal send to the network as example a standard microphone without pre amplifier need an analog gain of 40 dB Input Level The input attenuator It is used to decrease a too higher or s
135. ound image An image can be used as background for the user interface To change the background click on Background image in the Vox Net menu A box will appear asking if you want to keep the current image as background Click on No to confirm that you want to change the image 19202120808 16430 25218 cb33664d bmf AE PARENT et messages music Select the image placed before in AI eae ox Sales bmp from 1 to 16 bits To match with your screen use an image with size near from your screen properties kiaia J1 q1 1177 Baw How to Diffuse Music In enhanced music mode To activate manually the music diffusion it is necessary to select at first the zones of the remote stations where must be diffused the music In the main window click on the button MUSIC The list of the musical sources is displayed CD player Music library Settings By clicking the name of the source the selected musicis directly diffused in zones previously selected To stop the music broadcast select the music library again In normal music mode To diffuse the music the user has to click on MUSIC button The window Volume setting and music routing will be displayed Messages server client PMIP Music library 2 CD player Music library 1 Cancel Then the user has to select the musical source in the list For example we chose the source CD player Those both
136. p server will detect the closed connection and wait for during 50 seconds to know if the active server really doesn t works Then the backup server will switch to active server that is means that it take the control and the management of Vox net system Now the other server becomes the backup server YouMaNet 12131671 Receive ACT 14141671 12141671 14151671 14151671 1161671 1161671 14171671 14171671 14101671 14101671 141291671 119064 14197512 14017061 Send BEF Receive ACT send BEF Receive ACT Send BEF Receive ACT send BEF Receive ACT send BEF Receive ACT send BEF Receive ACT Connection closed Connecting to activ Audio Codec To send audio through the TCP IP network the original signal must be compressed and encoded to reduce its height The audio coding and decoding request time to works This latency time is increased by the audio quality The coder can be configured for two formats MP3 or SPEEX For each format several sampling rate and bit rate can be chose In the other side the decoder will automatically detect which format is used Sampling rate Ha Bit Rate bit s 32 000 40 000 48 000 56 000 84 000 80 000 96 000 112 000 32 000 48 000 Hz 128 000 12 800 16 800 20 600 23 800 ee all 27 800 34200 42 200 SPEEX Speex is a lossy format meaning quality is permanently degraded to reduce file size The SPEEX codec is optimized f
137. phone SN Speaker amp One phone number es El Amplifier Audio out Z PABK N Microphone amp Phone network Private automatic Pre amplifier Audio In Logic ln Call button Logic In Answer Button branch exchange VNB FXO y One IP address fo _ One phone number S oa VNB One IP address Ss Ethernet network TCP IP with or without Vox net J PMIP The PMIP series are microphones and speaker desk specially developed for the Vox net system They contain integrated analogical coder and decoder interfaces toward IP used to pass on audio signals through the network Network The PMIP have their own IP address with subnet mask They are linked to the network by a RJ45 cable The PMIP are configurable in a web interface reachable by its IP address Audio The PMIP series provide only one audio channel which is used by the integrated microphone and one other audio channel which is used by the integrated loudspeaker To be adaptable with the network capacities two encoding format can be chose Speex or MP3 with several audio quality level Control The encoder and decoder part of the PMIP is leaded by the server by using the command protocol Only the PMIP D communicates with the server by using the CLIENT protocol Intercom The PMIP series provide also the intercom function It able make a direct call between two PMIP In this usage the Vox net server does not interfere
138. ports 1 IDA Read Write Restart Import Export T ii a Copy Paste Delete Ib 1 Select a code 2 Notch all the zones contained by the code 3 Repeat this for all the code used Priority In the top left of the window Configuration unroll the menu and select OdB inputs In the middle of the configuration window click on the tab Priority alas sl A Configura n bam LE rs ame se teo a ees qualiza Priority Mode 1001 10dB oo Ida 1 Port 1 1002 10dB L Permanent 1003 10dE Permanent 1004 10dE Permanent Priority High ah Call station monitoring speaker 1 Click in the row of the port 1 2 Set the priority to a high value able the server to have a high priority to control the matrix Configure FTP for dual server mode The Files Transfer Protocol allows the servers to exchange their information To do this the both servers must have the FTP service installed and configured Server PC 1 Files Transfer Protocol Server PC 2 backup Messages MP3 Auto parameters Configuration FTP Account To take a file on the remote server the server must log itself on a user or administrator account in the remote server If you don t specify the server will log by using the window accounts Our advice is to create an account with standard user right dedicated only for the FTP For example username vnftp password ateis These username an
139. quires a virtual LAN Network architecture with static IP addressing The minimum global network data rate requested is calculated like that D M C S M number of simultaneous audio messages limited to ten in version older than 2 3 9 multiplied by the MP3 or SPEEX data bit rate C number of control station multiplied by 8 kbits s S number of remote systems multiplied by 8 kbits s The data rate of audio MP3 files depends on the quality needed but very good results are achieved with 64 kbits s In this example we calculate the biggest Vox net network dimension M 50 channels X 320 kbits s 16000 kbits s C 99 clients X 8 kbits s 792 kbits s S 200 station X 8 kbits s 1600 kbits s The maximum rate is 16000 792 1600 18392 kbits s 18 39 Mbits s Network addressing Before the configuration it s important to establish the complete list of server clients diffusion sources and audio matrix which will be installed in the system Vox net NAME DEVICES IP ADDRESS 192 168 110 192 165 120 PMIP N 192 168 1 40 192 168 121 PMIP N 192 168 1 41 PMIP D 192 168 1 22 192 168 123 PMIP K 192 168 1 42 VNB CD player 192 168 1 28 VNB Tuner 192 168 1 29 IDA4M IDA4Ms 192 168 1 30 IDA4M 192 168 1 31 IDA4XM 2 IDA4XMs 192 168 1 32 IDA4XM 192 168 1 33 The subnet mask is 255 255 255 0 Vox net Software Installation Vox net can be installed on Windows NT XP and Vista The hard disk space needed is 11 91 Mb It has been t
140. r VNB Extreamer the issue can be MatrixName CMD absent The command interface connection of the decoder linked to the MatrixName is not connected control of the VNB encoder decoder by the server MatrixName RS absent The serial gateway connection of the decoder linked to the MatrixName is not connected control of the matrix by the server For each Client PMIP D PC the issue can be ClientName CLIENT absent The client is not connected PC or PMIP D ClientName MICRO absent The encoder of ClientName cannot be lead ClientName SP absent The decoder of ClientName cannot be lead For each Encoder PMIP VNB Instreamer the issue can be ClientName MIC fault There is a default on the loudspeaker of ClientName ClientName SPK fault There is a default on the microphone of ClientName Table of the reported faults Fault reported Type and Issue of the fault Explanation displayed in the fault box MatrixName Matrix absent The server can not Check the RS232 serial cables communicate with the VNB between the VNB and the matrix The VNB can not pin numbering communicate with the matrix Check the matrix configuration PCIDA4XM serial Check the VNB PMIP configuration RS232 Restart the VNB MatrixName Immediate Fault The IDA matrix has an internal Open PCIDA4XM software and look what is the fault It can comes of amplifiers etc MatrixName Deferred Fault The IDA matrix has an internal Open PCIDA4XM software and fault look wha
141. r 1 224 0 37 0 8010 Microphone number 2 224 0 37 1 8011 Microphone number 3 224 0 37 2 8012 Design This chapter explain how to create the Vox net site interface that s mean the buttons definition When the configuration is finished it will be necessary to create the user interface of the site It s meaning the selected area for the routing sign as well as the group button The creation operations of a new site record a site load a site are available by the unroll menu of the button MENU The corresponding files have the vns extension and bring together all the information links to a site configuration Those established in the Configuration window those concerning the areas and groups available for the exploitation When areas and groups are created and configured the command Site recording of the button MENU allow to save all the information of the site in a site file vns extension Definition of Zone and Code To do the routing control the Vox net server send request to remote matrices by the Modan protocol These request contain a logical code which is associate with one or several physical zones This association musts be defined locally in the matrix by the PCIDA4XM software That is mean for example that the code 1 in the matrix 1 can be assign with the zone 3 of the matrix 1 and the same code number in the matrix 2 can be assign to zones 1 and 2 of the matrix 2 Type of buttons There is three function
142. rameters Allow the user to listen message in its monitor speaker Allow the user to select a message during its diffusion for listening and set the volume Allow the user to open the zone parameters window Allow the user to modify the Vox net site create new site save site change site buttons creation buttons destruction background image Allow the user to have access of the Configuration menu Allow the user to modify the zone parameters Name of zone matrix number and code number This button in the message window is not accessible Listen These both buttons in the Vox net window are not accessible This window is not accessible Parameters Name Zone 4 Zone Le Matrix Logical Zone E 4 Administration Pelda4xHM Close _o Only these action are available in the Menu Music On Memorize window Dialogs display Close Vox Net Stop this computer This window is accessible but the parameters cannot be changed Therefore the button Administration Pclda4XM is still accessible Parameters Hame one 4 Zone a NET Le Matrix 1 Administration Pclda4xHM Ok Cloze Logical Zone TRE Local music Allow the user to active or This action in the Menu is not accessible not the music ET Whi On This is for the local music directly connected in the matrix Window Allow the user to storethe This action in the Menu is not accessible ac
143. rd is required This parameters can be changed here By default the Username is ateis and the password is ateis A second user can be created only one To create a new user write its login and password in the following box and click on Apply new settings Login The login Password The password Confirm The confirmation of the password it must be the same System Firmware In the web page of the VNB PMIP select the tab System and Firmware to open this page Home Status Config System Password Firmware Network Time Firmware Update Product VNB Current Version 0 8 2 Boot Loader 1 1 0 Select new firmware file Upload this file i Copyright 2006 Ateis International About Us Here you can read the firmware version This page allows also updating the firmware Product The name of the product Current Version Which firmware version is already installed Boot loader The version of the boot loader To update the firmware click on Pareourir and select the firmware to install You download it on our web site Then click on LHBIO8d this file start the update System Network In the web page of the VNB PMIP select the tab System and Network to open this page Home status Config System Password Firmware Network Time MAC Address MAC address 00 22 13 F0 00 3F IP Settings Host name IP address 192 168 10 10 Network mask 255 255 255 0 Gateway 1
144. re of the noise level and adapt the gain of the corresponding zone s 2 Several Racks of SINAPS XM can be remote controlled from a Master location 3 A MODBUS protocol allows third party system to control SINAPS XM over a serial link Up to 200 remote SINAPS system can be connected to the Vox net network Audio Each matrix is able to receive up to 4 simultaneous audio channel from the VNBs These audio signal can be messages microphone call or music If more channel is needed several slaves matrices can be linked to the matrix Each gives 4 channel in addition Control These remote matrices are lead by the server by using the MODAN protocol The link between the server and the matrices is done by the RS232 serial link converted to RS485 format to pass through the TCP IP network The serial cable used here is not a standard cable The RS232 port 1 of the matrix connector must be connected to the PC port of the VNB port 1 IDA side port PC PC or VNB side TX 2 2 RX RX 3 3 TX ground 6 5 ground Ports RS232 The RS232 connector of the matrices is split in tree ports The first port must be used to able the PCIDA4XM software to communicate with the matrices So AS RS PORT 1 used by the PCIDA4XM to connect matrix to PC or VNB port 1 IDA side port PC PC or VNB side TX 2
145. reased by link one or several IDA slave units In the top of the window Configuration the menu able to define the total number of IDA and IDA slaves linked to the matrix 2 3 4 5 6 7 8 Serial ports The window Configuration allows configuring the matrix In the unroll menu select Serial ports lx Configuration INITIAL SITE changed clic on Write Serial ports 1 IDA Read Write Restart Import Export Ima port Protocol 82 Parity stop pets Audio channels 1 1 1 F PCIDA4EM 38400 None 1001 2 MODAN 3600 Even 1 8 A ee Available Ode inputs PCTDA4xM 38400 bauds No parity i stopbit la databits Audio channels This window displays the ports settings The settings box able to set the serial port parameters The parameters of the port 1 must be 38400 bauds No parity 1 stopbit 8 databits It must match with the setting of the VNB The audio inputs controlled by Vox net must be associated with the port 1 and with a channel Up to four audio channels are available to be associated with the audio inputs The channels must by associate in order the channel one is the first The port 2 can be used by different protocols Settings MODAN allows to do remote access External clock allows to synchronize the matrix with an external clock ATEIS MODAN ad MODBUS allows a third party to control the matrix ATEIS MODAN Multipoint
146. replaced in order Message count 2 Message number Bank number Message name register 1 1 1 001 RECORD 02 09 2008 16 03 13 register 2 002 RECORD 02 09 2008 16 01 57 register 3 Numbering of pre recorded Messages A pre recorded message is a mp3 file which was been moved in the folder C Vox Net messages Ordinateur E OS Cr de Vox Net de messages 03 Alicia mp3 d 2 rock mp3 For the pre recorded messages the following rules are implemented o Anew pre recorded message will take the firsts characters of its name as message s number o Anew pre recorded message with a number already used will be stored and counted but won t be used o Anew pre recorded message is associate by default with the bank number 1 o When a pre recorded message is removed from the folder c Vox net messages the parameters of all following messages will take the previous place in the registers and the registers containing its parameters will be deleted For example this is the state of registers in the table of exchange Modbus when no messages are stored Message count 0 Message number Bank number Message name register 1 register 2 register 3 A new message 03 Alicia is stored in the folder its name contain the number 03 so it will take this number as message s number 3 Message count 1 Message number Bank number Message name register 1 03 Alicia register 2 register 3 A second message
147. rget to click Apply new settings to store the new setting in the VNB Encoder Status In the web page of the VNB PMIP select the tab Status and Encoder to open this page Home Status Config System Logic Network Decoder 1 Encoder 1 Command Intercom Audio Stream Encoder Status Mode OFF State N A Format Speex Bit Rate 21600 kbit s Frequency 16000 Hz Frames Encoded 0 Packets Sent O Copyright 2006 Ateis International About Us This page gives the current state of the VNB PMIP encoder Mode The current mode of the VNB OFF Raw UDP or RTP If the VNB is configured in mode OFF this mode status becomes Raw UDP or RTP when the VNB is decoding State The current state of the VNB PMIP It display if the VNB PMIP is connected or not and display the IP address of the remote device generally the server If the VNB PMIP is configured in mode OFF this mode status becomes Raw UDP or RTP when the VNB PMIP receive the command to start the encoding N A not available waiting streaming from IP address Format The current audio encoding format MP3 or Speex selected in the Config Bit rate The current bit rate of the encoded audio Frequency The current frequency of the encoded audio selected in the Config Frames Encoded The number of frames encoded since the VNB was switched from mode OFF to start the streaming Packet Sent The number of packet sent since the VNB was switch
148. rity and will be preceded by the associated chime In this example above the type Informative is associated with the chime named Chime3_ Inf and with a priority of 50 commercial security Informative Message banks and associate chime This box able the user to associate messages with predefined chime and priority Message banks and associate chime Add Delete Bank Any Write here the name of the bank Select the chime Write here the priority Message banks and associate chime Commercial Chimel _com 40 Add Secunty chimes secu 80 Informative Chime3_Inf 50 Delete bank chime priority Every pre recorded or recorded message are classified in the banks of messages Each bank can be associated with a chime and a priority When the user won t to send a message he will have to choose it inside a bank So the message will take the associated priority and will be preceded by the associated chime Music On Off Scheduler For historical reasons there are two different music schedulers The first is accessible with the music button and able to program the music zone by zone through the network see How to Diffuse Music The second explicate in this chapter is accessible in the configuration menu It is able to switch on and off the music directly in the matrices This scheduler is allows to plan one or several time slots in which the background music will be diffused in every linked matri
149. rough the ethernet network using the TCP IP protocol on port 502 Several parameters of Modbus protocol can be set here They must be in accordance with the third party PC settings The Modbus address of the server The string format RTU ASCII or TCP IP port 502 All the serial port parameters Serial port number Bitrate from 1200 to 38400 bauds Parity no parity even parity odd parity Number of data bits 7 or 8 Number of stop bit 1 or 2 Monitor used for the listening Modbus request Any or a client See also the chapter How to Use a third party control Paging Record This new function allows recording all the microphone call in the server Paging Record Enabled For 60 days Done at 0 hour s Enabled Notch this option to enable the paging record function For 60 days Here you can change the number of days after which all the recorded call will be erased Simply change the number in this box Done at 0 hour s This is the hour in the day when the recorded call older than the defined number of days will be erased Access In the main window of Vox net software click on the button k configuration Then select the tab Access This window able to control the user access rights with the Vox net software interface When Vox Net is started it requests to enter an access code This will define the rights according to the user There is two user level administrator and user d a
150. rver i Dual Server Client of E Lancel Write in the both box IP backup Audio and IP Backup Control the IP address of the other backup server PC Write in the box IP Shared Audio and IP Shared Control the common IP address shared by the both server Repeat all this procedure in the other server PC by using the respective IP address IP and backup IP are inversed the shared IP is still the same Our advice is to save and close Vox net on the both server then to restart the servers one by one When the servers are working in dual mode save the configuration The configuration is now saved in the both servers Test the VNB PMIP To test your devices without Vox net you can use a telnet software like PuTTY in the following example Connect your PC and the device to test in the same IP network Open a session with the IP address of the VNB PMIP and the port depending of what you want to test Command port 12302 RS232 port 12303 Music port 8200 or 8201 or 8202 etc Messages port 8300 or 8301 or 8302 etc Basic options for your Pu T TY session Specify your connection by host name or IP address Host Name or IP address ort 192 168 10 10 12302 Raw Tent Rogn SSH Load save or delete a stored session Saved Sessions VNB command 10 You can find the complete description of the VNB PMIP protocol in our website D ATEIS VNB protocol v2 1 pdf Use a third party control
151. s own microphone External Speaker Notch this option if you use the PMIP without its own speaker Microphone Settings Gain The gain of the pre amplifier of the audio input used to increase the incoming audio signal send to the network as example a standard microphone without pre amplifier need an analog gain of 40 dB AGC Max gain Determine the maximum of automatic gain AGC Target Level Determine which relative volume you want to target The DBFS is a unit relative to the maximum digital level AGC Attack Time This is its attack time of the AGC The time required to get the original signal to the target level AGC Decay Time This is its decay time of the AGC The time required to get back to the original signal level Noise Gate Threshold Adapt here the gate threshold The signal will be ignored below this threshold Speaker Settings Attenuation The relative attenuation of the audio level in the speaker Apply After each modification you must click on Apply to store the parameters Decoder Decoder Config In the web page of the VNB PMIP select the tab Config and Decoder to open this page To enter in the Config web page a login and password is required By default the login is ateis and the password is ateis Home Status Config System Config Logic Audio LATAY Decoder 1 Decoder 2 Encoder 1 Encoder 2 Command Audio Stream Decoder Settings Mode OFF sl Format Auto Detect Options Fa
152. s page Home Status Config System Config Logic Audio R5232 Intercom Decoder 1 Decoder 2 Encoder 1 Encoder 2 Command Vox net TCP Command Interface Settings Mode OFF k TCF pot 1 Options Fault if not connected Apply new settings Copyright 2008 Ateis International About Us As the VNB is in stand alone mode it s not leaded so under Mode select OFF Click L4BBly new settings to store the new setting Vox Net Devices Safety declaration For your safety please follow the instructions in this chapter to get the optimum results from these units Caution This sign indicates a potentially hazardous situation that can result in moderate or minor personal injury and or property damage Exclusion of responsibility Manufacturer importer or dealer shall not be liable for any incidental damages including personal injury or any other damages caused by improper use or operation of the devices Warning Warning This sign indicates a potentially hazardous situation that can result in death or serious personal injury e Do not expose the device to extreme temperatures direct sunlight humidity or dust which could cause fire or electrical shock hazard e Keep away water or other liquids from the device Otherwise fire or electrical shock may result e Connect the power cord only to an AC outlet of the type stated in this Owner s Manual or as marked on the unit Otherwise fire and electrical s
153. s setting the parameters of several buttons one by one Name Write here the name of the button it will be displayed in the graph element Matrix Define here which remote matrix will be designate by the button Logical Zone Define here the logical code using to designate one or several physical zone in the selected remote matrix Administration Pclda4XM The button Administer is used to launch the PCIDA4XM software only for a Modan matrix which allow configuring it and visualizing detailing its condition occupation defect Parameters one 1 Zone rm KI EEG Logical Zone 1 1 Administration Pclda4 lt M Ok Close For a group you can log on its name display on the graph element and assign or take off areas from this group in clicking on the concerned areas with the left button of the mouse The areas related to the group are indicated by a straw colour background In the both case a click on the button close will ask if this adjustments are to save except if the option Don t Ask of the Main menu is activated Set a Group button To define the parameters of the buttons click on the right button on the element which you want to adjust This window will appear Button unable to move Ok Close Group x The cursor able to set the parameters of several Group one by one Name Write here the name of the Group it will be displayed in the graph element Button unable to move I
154. screen These buttons does not select any zones e Buttons bar These buttons able the user to do different actions call messages music They allows also the administrator to have an access to the configuration see Vox net software Buttons bar e Client speaker buttons These buttons able to control the volume of the client speaker e Programs box This box display all the programs of the message schedulers and all the programs of the music scheduler see Vox net software Programs box see Mechanism Messages see How to Schedule Messages e Waiting messages box This box display the messages which are waiting to be diffuse see VoxOnet software Waiting Messages box e Fault report box This box display all the faults reported by the Vox net see Vox net software Fault report box Buttons Bar This buttons bar able to do several actions and setting The available buttons depend of the client configuration CHIME fe DoucroPhoirs MESSAGES o r ESE fr HISTORY ET ACCESS STOP Le Available only if the client is associated with a microphone By clicking on Chime the user can start a microphone call preceded by a chime defined in Configuration window audio in the zones selected in the buttons area see How to Diffuse Call with Chime MICROPHONES Microphone Available only if the client is associated with a microphone By clicking on Microphone the user can start a microphone call in the zones sel
155. se microphones are used only for local call The call is diffused in the zones connected to the matrix but is not transmit to the network These microphones can also do a remote access that s means that a microphone connected to a matrix can do a remote call diffused in another matrix In this case the priority of this remote call will be the microphone priority limited by the input priority of the remote matrix Priority grid Next step is to fix the priority grid for all sources connected to the network Example of priority grid PO E O E S Client2 PMIP N al remote 90 7 Client3 PMIPD call remote 90 7 PO E E E S 0 Matrixt DAM localPsSMical___ local 90 7 i DAIM Message evacuation 1 DaM input voxanet channel DaM nput 2 voxanet channel 2 DA4M Message closing 2 DAAM focal PADT cal oa 0 Matrix 3 IDA4M remote PADT call from remote access matrix 2 to matrix 3 IDA4M Input 1 voxanet channel 1 local DAAM gt input2 voxanet channel2 Serverorclients PCserver Messages from security bank Peserver Messages from information bank remote 80 Poseer Messages from commercial bank Server or clients PC server Messages high leve Server or clients PC server Messages medium level Server or clients PCserer Messages low level remote J Server or Clients Call with chime security remote 90 Call with chime information C Music source 1 CD player Music library E
156. sed for the audio encoding decoding can be different or identical than the card used for control By selecting your network card in the unroll menu its IP address will be automatically write in the both IP audio and subnet mask box IP audio and subnet mask If necessary write here the IP address and its subnet mask of the server PC that you are configuring Clients connection Select this option if the network card is used for the clients connection Chents Connection If the IP address of the PC wrote in the boxes Clic here to make this computer does not match with the current IP address of compatible with recorded network configuration the PC this new window will box appear By clicking on it you can automatically set the IP address In Dual Server Mode In this mode two PC are used as server Vox net It allows to have a safety backup of the server The Vox net software must be started on the both server but only one is really active at the same time The second stand in backup state see also chapter Mechanism Dual Mode A common IP address must be used as shared address It must be different than the IP of the both servers In the Clients configuration only one server must be displayed with this shared IP address In this example we chose 192 168 10 20 pe Yox Net Configuration Setup Setup MAME CLIENT IP MICROPHONE IP SPEAHER IP PRIORIT oo E 168 10 20 a 0 0 0 om 0 0 0 EE Call Options Mod
157. settings to store the new setting Select the tab Config and Command to open this page Vox net software support the Mode Vox net only since version 2 3 0 If you are using an older version select Barix Extreamer Home Status Config System Audio Decoder Encoder RS73 Command Intercom TCP Command Interface Settings Mode Barix Exstreamer TCP port 12302 Apply new settings Copyright 2006 Ateis International About Us ply new settings to store the new setting Configure an encoder VNB PMIP This chapter explain how to configure a PMIP or a VNB used as encoder For the parameters description please see the PMIP VNB Configuration chapter The configuration of the PMIP VNB is available by the web navigator Simply write its IP address By default is 192 168 10 158 http 192 168 10 158 In the web page of the PMIP VNB select the tab System To enter in the System or Config web page a login and password is required By default the login is ateis and the password is ateis Select the tab Network to open this page Home Status Config System Password Log Firmware Network Time MAC Address MAC address 00 22 13 F0 00 5D IP Settings Host name EH IP address 192 168 110 158 Network mask 255 266 255 0 Gateway 192 168 10 11 Apply new settings Copyright 2006 Ateis International About Us Write the whished IP address its subnet mask and the gatew
158. sociate sources to matrices In this mode the music is controlled with the function MUSIC ON in the Menu of Vox Net To diffuse the music the user has to click on MUSIC button The window Volume setting and music routing will be displayed Volume setting and music routing Messages server client PMIP Music library 2 CD player Music library 1 Inputs Cancel Outputs Program Program Then the user has to select the musical source in the list For example we chose the source CD player Those both buttons able to adjust the audio level of the selected source CD player By clicking the button Outputs a new list will be displayed with all the existing remote matrices Volume setting and music routing Matrix 1 CD player Matrix 2 0OdB Matrice 1 CD player Cancel Save Outputs Program The button Inputs is now renamed with the name of the selected source In this example it s CD player The user has to notch the box of the matrix where the music has to be sent Now the source is displayed next to the matrix If a matrix is selected those both buttons appear they able to adjust the audio level of the selected matrix Matris Now the music will be diffused as predefined Dual Mode Backup Server In this mode two PC are used as server Vox net It allows having a safety backup of the server The parameters of the dual mode have to be set before see Configuration wi
159. t it will display all the communication between the Vox net server and all the Vox net devices That includes communication with VNB PMIP instreamers extreamers remote matrices and clients of Vox net To open the dialogs box click on i and then dialogs display Y Dialogs display ox Met Dialogs Display Un Partial To File 09 49 20 140 ETC gt Client Z 09 49 20 140 Data received from server ETC 09 49 20 140 ETC gt Client Client 1 09 49 25 156 ETC gt Client 09 49 25 156 Data received trom server ETC 09 49 25 156 ETC gt Client Client 1 09 49 27 34d Receive HEP 09 49 27 2354 Send ACT 09 49 30 171 ETC gt Client 09 49 30 171 Data received trom server ETC 09 49 30 171 ETC gt Client Client 1 09 49 31 171 PEPE gt Matrix 1 Matrix 1 03 49 31 171 Decoder connection 192 168 10 10 09 49 31 171 CHD1 lt ACE gt 09 49 31 406 Matrix 1 Matrix 1 gt JE 16 15 14 13 12 11 09 08 OF 06 OS 04 03 02 01 09 49 32 171 ELEI gt Matriz 2 Matrix 2 09 49 32 171 Decoder connection 192 168 10 11 09 49 32 171 CHD2 gt lt ACE gt l 09 49 32 515 Matrix Matrix gt JE 16 15 14 13 12 11 09 08 UY 06 OS 04 03 02 01 ICI 09 49 34 187 Coder connection 192 168 10 5 09 49 35 187 ETC gt Client 09 49 35 187 Data received trom server ETC a 09 49 35 187 ETC gt Client Client 1 This window displays all the Vox net communications between the Vox net server and all the VoxO net clien
160. t is the fault It can comes of speaker lines amplifiers etc MatrixName RS absent the RS232 configuration is wrong Check the serial cables pin numbering see Vox net Devices Matrix Check the RS port must be 12303 in the extreamer VNB restart the extreamer VNB MatrixName CMD absent there is a problem with the Check the command port must be command interface 12302 in the extreamer VNB restart the extreamer VNB ClientName CLIENT absent The client is not connect Check the RJ45 cables Check the Vox net software configuration Client tab Is Vox net software started ClientName MICRO absent The encoder of ClientName Check the RJ45 cables cannot be lead Check the VNB PMIP configuration Check the command connection of the client ClientName SP absent The decoder of ClientName Check the RJ45 cables cannot be lead Check the VNB PMIP configuration Check the command connection AAA e ClientName MIC fault There is a default on the e Check the microphone it can be microphone of ClientName defect or it can have a bad contact ClientName SPK fault There is a default on the e Check the loudspeaker it can be loudspeaker of ClientName defect or it can have a bad contact server unavailable the client cannot connect with thelle Check the IP address of the server server in the Client s Configuration No faults are reported but an issue happened Message cannot be sent e the commands mode of the VNB PMIP is OFF
161. t mode the broadcast IP address of the network must be set here as example 192 168 10 255 In multicast mode the IP address used as multi cast server must be write here as example 224 0 123 0 see Configuration window Audio The encoder will wait to have this number of packet in its buffer before start to send the frame MP3 Two audio format are available to encode the audio MP3 Select this format if you want to encode in MP3 format Speex Select this format if you want to encode in Speex format The sampling frequency used to convert the analogical signal to numerical value Different value are available in function of the selected format A higher sampling frequency gives a better audio quality but increase the number of samples to send and the latency time Format MP3 Format Speex Frequency 16000 Hz The bit rate used to send the audio It should be adapted to the network capacities A higher bit rate decrease the latency time but use more network bandwidth This parameter should be adapted to the network capacity 48000 Hz 32000 Hz Format MP3 Bit Rate SG kbits i mat Speex 40 kbit s Bit Rate 4 12800 bits i 48 kbit s 4 12800 bit s 56 kbit s 5 16800 bit s 64 kbit s 6 20600 bit s 80 kbit s 7 23800 bit s 96 kbit s 8 27800 bit s 112 kbit s 9 34200 bit s 128 kbit s 10 42200 bit s When any settings was been changed here don t fo
162. t try to make any modifications to the device This is a potential fire and electrical shock hazard Caution e To prevent the unit from falling down and causing personal injury and or property damage avoid installing or mounting the unit in unstable locations e Leave enough space above and below the unit to provide good ventilation of the device If the airflow is not adequate the device will heat up inside and may cause a fire e Operate the device in an environment with a free air temperature of between 0 C and 40 C 32 F and 104 F e Turn off all audio equipment when making any connections to the device and make sure to use adequate cables e Do not use benzene thinner or chemicals to clean the device Use only a soft dry cloth e f the device is moved from a cold place e g overnight in a car to a warmer environment condensation may form inside the unit which may affect performance Allow the device to acclimatize for about one hour before use VNB amp PMIP VNB There is two kind of VNB case e The VNB 2 which contain one VNB board e The VNB24 1 VNB24 2 VNB24 3 VNB24 4 which contain respectively 1 2 3 or 4 VNB board inside a rackable case VNB 2 VNB24 4 The VNB is an analogical coder and decoder interfaces toward IP used to pass on audio signals and serial control through the network It have two symmetrical audio input channel and two symmetrical audio output channel The inputs al
163. tab Client if the VNB PMIP is associated with a client or a Matrixes if the VNB is associated with a Matrix Select the channel corresponding with the VNB PMIP you want configure in the channel unroll box and click on the button Setup LL Hiin f mudo To O toco Meitenarcs Hetmok Setup Setup HEHE CLEMT F MICROFHOKE IF TEAREN F PROSITY e isa tenia rio rsz ten 10153 fonos fiucal Options i cliens FENTE 127 1065 16 103 0 0 5 0 6 6 0 0 A S Music library 1 9 0 0 0 0 0 0 0 0 9 0 9 hi Humic library z 0 0 0 0 0 0 0 0 0 0 0 0 Il S CO player 4 0 0 0 192 168 10 111 0 0 0 0 Stream to 0 0 0 265 Port 8010 Home If the VNB PMIP with its specific IP address is correctly connected the Vox net network this configuration web page will be open ATEIS embedded HTTP server Home Status Config System Firmware Product VNB Version 0 9 3 Free Memory 3767140 bytes Libraries TCP IP Stack LwiP 1 3 1 Speex Codec speex 1 2beta3 MP3 Decoder ADI MP3 Decoder Rev 2 1 0 MP3 Encoder ADI MP3 Encoder Rev 1 2 0 Hardware SPI Flash Manufacturer 0x20 Device 0x8014 NAND Flash Manufacturer 0x20 Device 0xf1 Capacity 1024 blocks 64 pages 2048 bytes 128 MB File System boot 6508 kB free 7552 kB total flash 121728 kB free 122240 kB total This is the Home page of the VNB PMIP Here you can only read several i
164. teis International About Us The serial parameters Baud rate Data bit Stop bit and parity must match with the serial parameters in the IDA matrix The PCIDA software for matrices is described below the RS232 settings look like this Serial ports PCIDA4xM 28400 bauds No Parity kd a atopbit z 8 databits ae Notch the option Fault if not connected if you want the VNB displaying a fault when the RS232 port is unconnected For the RS232 protocol the VNB is the RS232 server So under Mode select TCP server The IP port is always 12303 ply new settings to store the new setting Command Select the tab Config and Command to open this page Vox net software support the Mode Vox net only since version 2 3 0 If you are using an older version select Barix Extreamer Home Status Config System Config Logic Audio R5232 Decoder 1 Decoder 2 Encoder 1 Encoder 2 Command TCP Command Interface Settings Mode Vox net a TCP port 12302 Options Fault if not connected Apply new settings Copyright 2006 Ateis International About Us Under Mode select Vox net The command TCP port is always 12302 Notch the option Fault if not connected if you want the VNB displaying a fault when the command port is unconnected Click Apply new settings store the new setting Matrix Configuration Connect your PC to the RS232 port of IDA by using the delivered cable look on
165. the cable labelling Install PCIDA4XM software on your PC Start the PCIDA4XM software A E ato EEES ES EE SE E toa more protocol oa Parity Scop Dara Audio channel 1 a a Fe 0 di 4 0 4 7 il _ 1 BCIDAMKM SED Mona 1l B 1001 AAA El 2 MOON 9600 Evin 1 A If needed notch the connection box to establish the connection with the matrix Number of IDA In the configuration window unroll this menu and select the number of IDA in your system If there is no slave like in our example select 1 IDA 1 IDA Serial setting In the configuration window unroll the general menu and select Serial ports Ex Configuration INITIAL SITE changed clic on Write A Serial ports 1 IDA Read Write a Restart rt Export AE E O EE Audio channels 1 ECIDE4XM MODAN F 38400 3600 None 1 Even 1 8 ro r r PCIDA4xM 38400 bauds r No parity a atopbit 8 databits m Audio channels Channel 4 Available 0d8 inputs 1002 1003 1004 lt Put Delete This window display the RS232 ports settings Vox net use the port 1 PCIDA4XM to communicate with the matrix This port support the PCIDA protocol wich able to use PCIDA4XM software from Vox net Click on the first raw which is IDA port 1 PCIDA4XM Check the serial settings The parameters of the port 1 must be 38400 bauds No parity 1 stopbit
166. ton in the buttons bar of the main Vox net window to open the messages window Program Then on the bottom left of the messages window click on the button to open the program part Message sweet welcom message Time slot of diffusion dur Medium Set all the parameters to define the time slot of diffusion Start Time End Time Times Period Days The beginning of the diffusion The end of the diffusion The number of repetition of the message in the time slot The time between two successive message diffusion in the time slot It can be wrote or selected in the unroll menu Notch here the days when the message have to be diffused Click on to select all the days Options Notch the option With chime if you want to diffuse the chime before the message This chime is defined in Configuration Audio If no priority is associate with the bank of the message select the priority in the unroll menu Medium gt Validate Click on to validate the settings l Close Click on ose to close the program part Configure a decoder VNB For the parameters description please see the PMIP VNB Configuration chapter The configuration of the VNB PMIP is available by the web navigator Simply write its IP address A http 192 168 10 10 gt In the web page of the VNB PMIP select the tab Config To enter in the Config web page a login and password is requir
167. ts matrices coders decoders and third party The server is also considered as a client of Vox net That is means that in the Dialogs display we can see the communication between the server and the client server Client 1 Server Backup Server Vox net SERVER Client 5 PMIP D Client 4 Poste 3 Third party control Communication with the Clients protocol Client Communication with the Matrices protocol Modan Communication with the coders and decoders protocol Barix or Vox net Communication with the Backup Server protocol Client Communication with the Third party control protocol Modbus or OPC On the left of the window the date and hour is displayed for each communication Display On Notch this option to start or stop the communication capture Partial Notch this option able to see the communications without the keep alive part It gets the reading more easily Click on Close to close the Dialogs display o lofie Click on To File to store the capture in the file C Vox net voxanet txt If the capture is not stored all the information will be lose at the closing of the Dialogs Display How to read Commands sent command gt destination type destination name ETC gt Client Poste 1 means the command ETC has been sent to the Client named Poste 1 _Y11002_K gt Matrix 1 Station 1 means the command _Y1100 2
168. tual windows positioning PE and height Maintenance Allow the user to The button Administration Pclda4XM is not administrate the remote accessible matrix Parameters Name Zone 4 Zone mma Y PK D Matrix Logical one lz 4 Ok Close History Allow the user to access the This button in the Vox net window is not accessible window ses oo Historic of the events HISTORY Sal Close Allow the user to quit the This action in the Menu is not accessible Vox net software Close Vox Net Stop Allow the user to shut down This action in the Menu is not accessible computer the computer j Stop this computer Volume Allow the user to modify the These both buttons in the Volume setting and music setting volume settings of sources routing window are not accessible messages clients music Client 2 sources and the outputs to remote matrix Music setting Access Microphone call Allow the user to select the music sources for the diffusion zones that include the scheduler Allow the user to type another access code And so to change the predefined access rights Allow the user to diffuse microphone announcement with or without chime If the client does not has microphone this parameter is automatically disable This button in the Vox net window is not accessible These buttons in the Vox net window are not accessible CHIME te MICROPHONES Maintenance
169. u find some MP3 file in the folder c Vox Net you can delete them Only the folder c Vox Net Messages will be used If you want to use a music database stored in the server Copy the MP3 file in a new folder This folder must be named Music following by the client s number which will be attributed to him see chapter Mechanism Music Presentation This is the Graphical User Interface GUI of Vox Net it s automatically open when the software is started It looks the same in the server PC or in clients PC lt VoxeNet gt 2 2 16 Server voxanet demo Volume 10 Y Waiting Messages Audio Streams F E Iho faut reported CHIME OS Station 1 Station 2 All Call Station 1 All platforms Station 1 4 kS te Start oh lt ox Net gt 2 2 16 a f 9 36 AM Client speaker buttons Programs box Waiting Messages box Buttons bar A eet Fault report box AN Cal _ AAA LT e Buttons Area This area contain all the buttons able to select the diffusion zones There is tree type of buttons Zone Always turquoise these buttons are associated to a matrix and a code this code able to designate one or several zones in the matrix Group Always grey these buttons are groups that can contain several zones Bookmark Always orange These buttons able to move the visible part of the buttons area As the buttons area can be more big than the
170. ult if time out Buffered Packets 1 UDP port 0 Address 0 0 0 O multicast or source filter Apply new settings Copyright 2008 Ateis International About Us Mode three mode of decoder are available OFF The decoder will automatically switch to Raw UDP or RTP modes depending of the command received from the Vox net server Raw UDP The decoder will decode any User Datagramm Protocol string coming from the network if it match with the UDP port number RTP This mode is not yet implemented It able to communicate in Real Time Protocol Format three audio format are available Auto Detect The decoder will automatically detect the format of the incoming audio signal and switch to MP3 or Speex format MP3 Select this format if you know that the audio coming from the network was been encoded in MP3 format Speex Select this format if you know that the audio coming from the network was been encoded in Speex format Buffered Packets The decoder will wait to have this number of received packet in its buffer before start to decode the information to audio signal UDP port The UDP port used to receive the audio information from the network In mode OFF this port will be automatically detected Address The VNB PMIP will only see the string coming from this IP address It can be used as source filter In multicast mode the IP address used as multi cast server must be write here see Configuratio
171. when a variable or fault is active Notch this option if you want the logical input monitored In this case you must use two resistances of 4700 Ohm wired as follow Non Monitored Monitored Command to execute when ON OFF Fault For each of these states you can define which string command the device has to do This enables an external device to command the PMIP VNB You can find the description of this protocol in our website 2 ATEIS VNB protocol v2 1 pdf When any settings was been changed here don t forget to click Apply new Settings 4 store the new setting in the VNB Logic Status In the web page of the VNB PMIP select the tab Status and Logic to open this page Home Status Config System Logic Network R5232 Decoder 1 Decoder 2 Encoder 1 Encoder 2 Command Intercom Device Logical Variables Device Global Status state 0 Logical Input 1 Value remin 1 0 Logical Input 2 Value reminz 0 Serial Gateway Connection serialconn 0 Audio Output 1 audioout1 0 Audio Decoder Time Out 1 audiotimeout1 1 Audio Output 2 audioout2 0 Audio Decoder Time Out 2 audiotimeout2 1 Audio Input 1 audioin1 0 Audio Input 2 audioin2 0 Intercom Call call 0 Intercom Ringing ring 0 Intercom Communication comm 0 Intercom Far End Talking farend 0 Device State Variables 0 fault 1 0k Logical Input 1 State reministate 1 Logical Input State remingstate 1 Ethernet Link ethlink 1 Command Interface Connection cmdconn 0 Here y
172. which able the server to control the matrix thru the network This concept allow the greatest installation suppleness as any unit can be located in any area from the moment of this area is link up to the network On the other hand thanks to the actual network deployment technique the physique distance notion disappears It is also possible to administer totally away all the constituent elements of a Vox Net network Vox Net responds to public address requirements and EN 60849 compliance local when several SINAPS systems need to receive audio and be controlled trough a TCP IP network Server PC Vox net GUI Third party Client 1 PC Client 2 PC Client 3 PC Client 4 Messages control Vox net GUI Touch screen Touch screen Audio music source Music library Vox net GUI Speaker Vox net GUI Micro amplified CD player y y Jl Vox net network TCP IP b VNB VNB VNB Matrix SINAPS Matrix SINAPS amplifier JENSI Cases eo l on piles Bianca RS Tel el Touch screen Touch screen rere rier a Speaker Vox net GUI Vox net GUI jo ME ay Es Pa Pe i 4 lifi Tifi K ampiner 4x amplifier Station 3 any matrix Speakers Speakers Station 1 Station 2 PABFMP 1 IDA4M 1 IDA4M Microphone sensor Network Network calculation First of all set a Network TCP IP dedicated with statics IP address manual for each PC All computers must be in the same network When the network has to be shared with other services VoxOnet re
173. white qu yellow qu yellow 3 R green greenfwhite os blue D gray Concretely the VNB FXO is used as gateway between a telephone and an intercom Telephone AN One phone number lt Target Intercom PMIP D with Intercom GUI e One IP address Fat Ai m 1 E Phone network Prvate automatic branch exchange VNB FXO e One IP address gt gt e One phone number gor RHI RMS Ethernetnetwork TCP IP with or without Vox net If a user uses a telephone to call the VNB FXO by typing the phone number of the VNB FXO the VNB FXO will forward the call to another intercom device The VNB FXO is not an intercom interface for the user it is only a gateway between an intercom and the phone line On the target side the user will respond to the call on the intercom device which could be a PMIP K the user press the key a PMIP D the user press the key on the LCD touch screen a PMIP N the user use the contact input as key or another VNB the user use the contact input as a keys Then the both users one on the telephone and the other on the remote intercom can discuss together It is a full duplex communication The both users can speak and hear the other in the same time As wrote above several devices can be used as target intercom If a VNB or a PMIP N without key is used as target intercom it s necessary to use two logic inputs one as key to start a call and the other to answer Tele
174. xx CONFIG Configuration issue between master and slave Ixxx COMM Read write issue on communication process between master and slaves Ixxx IDA4SU Communication issue between IDA4 X M and IDA4SU Ixxx CRC Firmware Corrupted Ixxx VERSION Version conflict between master and slave Ixxx AGC MIC Issue with the AGC sensing Microphone Pxxx PREAMP Preamplifier of PSSxxx or PSM defect m gJ A A AE AAA Pxxx CALL PSS PSM xxx calling Cxxx CALL Contact input xxx calling Txxx CALL Remote access xxx calling AS AO AN NN a C Lxx B SH C O AAA A er Backup Amp Initialization A eee Fxxx MISSING Communication issue between fire panel and IDA4 xxx AAA Event is a DEFECT Event is an input ACTIVATION Event is a MESSAGE playing Matrix connection Here you can see the connection between a matrix a VNB and the network VC AE ret network VNB MOCHON MELO WCA RSHA ARIOCUT AO 18899285308 bi MA ll
175. you are configuring IP Backup audio control Write here the IP address of the other backup server PC IP Shared audio control Write here the common IP address shared by the both server Client s connection Select this option if the network card is used for the client s connection Chents Connection If the IP address of the PC wrote in the boxes does not match with the current IP address of the PC this new window box will appear By clicking on it you can automatically set the IP address Clic here to make this computer compatible with recorded network configuration As example this the Network setting of the both server Vos det Configuration i l leon N E the Fran fe Fes Mfemus 0 192 168 10 2 255 255 255 0 192 168 103 Fszr ex IP Backup Control E Shared Control fi 32 168 103 192 168 10 20 FTP Utsemame Password Port anonymous 21 Test FTP on backup server ps and subnet mask 192 1 68 10 2 255 255 255 0 Mode Save F Dual Server C Client of E Lancel ax Server 1 IP audio and subnet mask 192 166 102 255 255 255 0 IP Backup audio control 192 168 10 3 IP Shared audio control 192 168 10 20 IP Audio and tubevel mask IF Backup Audio AP Shared Audio Fees 255 255 255 0 192 168 10 2 192 168 10 20 Network card for Control IP Data and subnet mask er SSS ee 192 168 10 3
176. zone through the network The cycle of this scheduler is one week Schedule Local music This scheduler allows to plan one or several time slots in which the background music will be diffused in every linked matrices It activates and deactivates the music directly on the remote station matrices IDA4XM Concretely the Vox net server will just issue a command Music On Off to the remote matrices The user cans also do this function manually by activate or not the command Music On in the Menu Music On This control can also be accessible with the button Music on in the touch screen PA PSSDT The local scheduler does not able to choose between the days it will be activate every days of the week In the Vox net software click on the Menu button and chose configuration Then select the tab Audio Cents Matias Tr Aocess Maintenance Porc Ns Instant Record Auto Reset Selection al 1 E Record Max 5 minutes Stop messages if owner Broadcast Enhanced Music Mode Wait Message 5 seconds Audio Messages Pronty r Chimes for clients High 4 commercial Chime _ com High 100 secunty chimez_s ecur 80 Medium 50 linformative Chime3_Inf 50 Low 1 i Music OnfOft Scheduler Message banks and associate chime Commercial Chimel_com 40 Secunty chimes secu Si Informative Chimes Inf 50 To add a new time slot click on the button Add A new line will be displayed

Vox-Net user manual v4

Contents

Download Pdf Manuals

Related Search

Related Contents