User`s manual This manual is for HWM105-987S Twin
Contents
1. The draining does not Is the drain hose frozen work Is the drain hose blocked by foreign material Are there laundries falling to the outer side of the spin tub There s abnormal sound during washing Are there hair pin coins or metal items brought inside the tub There s abnormal e Is the machine slanting sound and violent e Is the gland pressed evenly vibration during e Are there laundries falling to the outer side of spinning the spin tub e Are the laundries in spin tub too much There may be some ee a e It is the water remained in the factory inspection first use of the of performance machine 15 Packing list Name Quantity User s manual One piece e One piece Gland One piece e Twin tub washing machine e One set Speciafication Water level Water quantity L about Maximum 70 Medium 60 Minimum 50 Injection pressure MPa 0 02 0 2 Washing capacity kg 10 5 Spinning capacity kg 7 5 162. SH SELECTOR Figure 5 Midway spinning 1 Put the laundries into the spin tub evenly and smoothly 2 Spin 1 Put the gland in properly Please put in the gland properly even if the laundries quantity is small Push Gland Sk Bk Proper The laundries Proper No gland are slanting 2 Close the inner and outer cover of the spin tub Outer cover of The spin tub Inner cover of The spin tub 3 Spin for 1 2 minutes 3 Run the foam removing spinning 1 Set the water filling selector control rod at the SPIN side Fill water for about 1 minute If the water quantity filled is too large the water may flow out from the wash tub side Please twist the water tap to limit the water filling 2 Close the outer cover of the spin tub Spin for 1 2 minutes Rinsing Rinse with water filling 1 Put the laundries into the wash tub Select suitable current according to the laundries 2 Adjust the water level Set the water level with water level adjusting lever according to the laundries quantity Then fill suitable water continuously 3 Rinse Adjust the wash timer to 5 7 minutes to do rinsing Repeat the midway spinning and rinsing with stored water for 2 3 times Rinse with stored water 1 Put the laundries into the wash tub Select suitable current according to the laundries 2 Fill water to preset water level 3 Rinse Adjust the wash timer to 2 3 minutes to do rinsing When the laundries
3. Twin tub Washing Machine User s manual This manual is for HWM105 987S e Please read this manual carefully before using e Retain it for future reference 0030808394 Contents e Names of the parts e Safety precautions e Installation and adjustment Preparation before washing e The musts in washing Usage of the detergent e Washing sequence Disposal after washing e Trouble Shooting answer to question 14 e Packing list amp Specification Names of the parts Overflow filter D Wash selector Outer cover of the spin tub Inner cover of the spin tub Wash timer Spin timer Water filling entrance Control panel Major frame Water filling translation Spin tub Water level adjusting lever Cabinet Lint filter Valve cover Pulsator Wash tub Wash tub cover Back cover Drain hose KEN i Base frame Notes All illustrations in this manual are given for reference only Your products and accessories may show differences from these illustrations due to our continuous improvement Meaning and description of the symbols Contents marked with that symbol are related to the safety of the product and the personal safety of the users Please operate in strict conformity to the contents otherwise it may cause damage of the machine or injure the personal safety of the user Warning sign Forbidding sign Contents marked with that symbol are actions forbidden to pe
4. ake it out from the installation hole As per Figure 3 Install the two drain hose fixing hooks taken out into 4 the installation hole atthe other side of the base frame INL toaim atthe installation hole accurately you can lean the washing machine forward slightly Then rotate sluts cisions for 90 As per Figure 4 hook for 90 fag A hook for 90 pA to fixit Pull the fixing hook outwards slightly Inlay the Take ofthe Rung N drain hose into the fixing hooks reliably along f the groove at spin tub side and make it extend igure Figure 4 towards spin tub side the drain hose 5 Drain hose a Figure 1 fixing hook Figure 2 Then hang the drain hose into the hanging hole at the spin tub side As per Figure 5 Extend the drain hose from the rear side Take out the drain hose from the fixing hook Extend it from the rear side When the drain hose is extended from the rear side it can be hung on the point for drain hose at the two sides of the cabinet See to Figure 6 Figure 5 Water inlet hose Insert the water inlet hose into the water filing Water inlet entrance on the control pane directly pull it Oo out to dismantle it Water level indicator Select water level according to the quantity of the laundries Maximum p 24 Set the water level adjusting lever Medium MS to needed line Minimum phin Prep
5. aration before washing Preparation before washing 1 Connect the water inlet hose 2 Confirm that the washing machine is earthed reliably Then insert the power plug into the receptacle Do not connect the earth terminal to the gas pipe and tap water pipe 3 Put down the drain hose 4 Slanting or uneven ground may result in unstable working or abnormal noise Please make the machine stand horizontally Pay attention to followings before washing the laundries Check if the laundries has special requirement on washing Clear the pocket Take out the coins sand hairpins etc When the pulsator is running the buttons of the laundries may cause noise For The quantity of the laundries shall not be too large Stretch and loosen the Tie the long strips fasten the buttons close zippers Z Q A2 laundries before putting them in the tub 2 the sake of discretion please put the laundries with buttons into other laundries Check if the laundries are applicable for washing with machine Divide the laundries that are not colorfast from other laundries Put those laundries difficult to absorb water into water with hand For those laundries with heavy soil please first remove the dirt like mud or dust For the parts with heavy soil please apply detergent on them in advance which can make it easier to remove the soil For those laundries that may get lint ball and thos
6. curity and correct operating the machine Install the lint filter Put the underside of the lint filter into overflow filter then push the upside into overflow filter e After installation please refer that the lint filter installed to the right station otherwise the lint filter may be falled off when washing influencing your use Usage of the drain hose The drainage shall be smooth with the drain hose 1 The height of the drain hose shall be less than 10cm or the drainage will not be smooth enough and cause incomplete drainage 2 Do not tramp or press the drain hose 3 If the drain hose is too long cut it at mid point To make smooth drainage cut the front end of the hose slantingly Co 59 sen 4 If extra drain hose is needed please make separate purchase The inner diameter of the extra hose shall not less than 30mm and the length shall not exceed 1 5m If the extra hose is too long cut it either at point Aor B How to change the direction of the drain hoses Figure 1 indicates the ex factory installation position of the drain hose Side sectional view Drain hose iking hoo Extend the drain hose from the side of spin tub fixing hoo installation e Take off the drain hose from the hanging hole slighty a of the cabinet Pull the drain hose fixing hook outwards gently to take outthe drain hose from the two fixing hooks As per Figure 2 Rotate the drain hose fixing hook for 90 to t
7. e tub for long period Discharge the water immediately after each using Pull off the power plug and hang up the power cord Hang up the drain hose Wipe off the water drops on the surface and inside the tub with clean soft cloth Open the cover of the wash tub and the inner outer cover of the spin tub for some time about one hour then close them 13 Trouble shooting Answer to question When the remained water is frozen Prevent the freezing be sure to discharge the water completely after using After complete draining set the WASH SELECTOR at STRONG or STANDARD If it is set at DRAIN it will be rather difficult for the frozen water to melt When the water is frozen Pour hot water below 50 C into the wash tub to soak it completely Then turn the pulsator with hands gently Please confirm the drainage can work normally before next using 14 Trouble shooting Answer to question If there s breakdown please pull off the power plug before checking The following phenomena are not breakdowns sometimes Please confirm again before sending it to repair If there are real breakdowns please come to the special maintenance department or after sale service department of our company Do not repair it by yourself Phenomena The reason Is there power failure The machine does Is the power plug loose not act Is the pulsator twisted by foreign materials Is the drain hose put down
8. e with long fur tum it over before putting in Do not put those laundries polluted by chemicals into the washing machine directly The musts in washing e The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition that can be washed or spinned in one time Laundries quantity in one washing cycle shall be lower than the rated capacity The thickness size type of the cloth will influ ence the actual washing capacity Itis suit able to put in reasonable amount of laundries and the laundries can be turned round in wash ing for one time washing e Do not select Maximum water level for laundries less than 1 0kg so as to avoid splashing of water Usage of the detergent fou EE the whitenen How to use the washing powder Direct dissolved in th hine Fill water to decided level Dilute 1 Fill smail quantity bosses the whitener with container 2 Add the powder Run for 30 Pour it slowly into the washing tub seconds to dissolve it completely 3 Put it in the laundries Select suitable e Avoid using whitener on laun water level dries with color or pattern as they are prone to lose color The instant dissolving of the washing The whitener shall not touch powder the laundries directly 1 Prepare warm water of 30 C and a Refer to the user s manual for container the usage and quantity of the 2 Add the powder while stirring to ful
9. ke covers etc to avoid abnormal vibrations in spinning Do not let the machine share one receptacle with other electric appliances If the power plug is damaged or the plugging into the receptacle is loose do not use the plug any more 9 9 ed Safety precautions Do notstretch hands into the working machine It is dangerous even if the rotation is slow Take special care of the children Do not decompose repair or alter the machine by yourself Do not put any hot or heavy items such as the kettle with hot water on the washing machine Do not wash laundries with volatile materials such as thinner petrol etc Handicapped or children without care shall not use the machine Keep the machine away from direct sunlight and heat source like the heater e Please put down the drain hose before washing and connect the water inlet pipe properly e tis suggested to use foamless washing powder Please don tuse the washer in the environment below 0 C If the washer is below 0 C the washer s water inlet system and draining system will be frozen then result in the damaged of the whole machine If the washer has below 0 C please be sure to ensure the washer is placed under the room temperature for 2 4 hours and then use Installation and adjustment Please install and adjust the machine according to the requirement of the manual It is very important to your se
10. ly dissolve it m The powder is more prone to pollute the For powder whitener please laundries than the detergent Therefore dissolve it before using please use it with proper quantity e i A Dosage of different washing powder is different Please refer to the instruction of the washing powder for the detail dosage whitener Washing seguence Wash timer Wash selector Spin timer AE set to below 2 minute standard current fto set to below 1 minute irst set to 6 minute then strong current irst set to 2 minute then Water inlet turn it back it can increase turn it back it can increase the service life of the timer the service life of the timer STRONG p WASH TIMER WASH SELECTOR SPIN TIMER EA Wash 1 Water filling selector WASH SPIN Set the water inlet selector at the WASH side ENG Figure 1 2 Fillthe water and add the dissolved washing powder to make the water level reach the preset position Figure 2 Run washing program for some time to stir and dissolve the powder completely 3 Put in the laundries If the water quantity is insufficient please add water 4 Select the current WASH SELECTOR Select the strength of the current according to the laundries Figure 3 5 Select the washing time Select the washing time according to the laundries Figure 4 WASH TIMER 6 After washing Set the WASH SELECTOR at DRAIN Figure 5 WA
11. quantity is a few please use Standard current If you use Strong current it may splash 10 Put the laundries into the spin tub evenly and smoothly Press the gland in the tub properly Close the inner and outer cover of the spin tub Spin Select suitable spin time according to the laundries and do spinning During spinning if there s abnormal sound it is generally owing to slanting placement of the laundries Please stop the machine and re order the laundries In spinning it will pause the work if you open the outer cover of the spin tub Close it to resume the spinning To do spinning and ere or rinsing with water filling together please first do spinning for around 1 minute then do draining or rinsing with water filling Otherwise the spinning will stop owing to too much water stored in the spin tub J 11 Disposal after washing 6 Afterusing please clean the lint and foreign materials of the lint filter and overflow filter in time Otherwise it may influence your using the machine Please first pull off the power plug from the receptacle before cleaning Cleaning the lint filter The lint filter must be used during washing It must be cleaned in time after each using 1 Press the elastic piece at upper end of lint filter to release the tab from the filter cover and pull the lint filter outward to remove it See Figure 1 Figure 1 2 Remove lint Pull the lo
12. rform Performing of those actions may result in damage of the machine or injure the personal safety of the user Please check if the power receptacle has good earthing condition before using to guarantee your safety Safety precautions Please insert the power cord into special receptacle with rated vol tage Be sure to use single phase three pins receptacle The earthing terminal of the receptacle must be earthed reliably If possible please adopt electric leakage protector When the machine is normally using please put the power plug at the location easily to be insert ed and extracted by hand Be sure to pull the plug off when there s power failure or the machine is being moved cleaned or when it is idle If the power cord is bad to avoid risk it is required to replace it by the technicians of our special shop or the after sale service department Keep the pin of the power plug clean Do not put the machine at damp place like the bathroom Never wash it with water Do not place wet laundries on the control panel Do not use water hotter than 50 C ce In case the washing machine is installed on ground with carpet do not block the ventilation hole with carpet Ventilation hole at the bottom of the washing machine 9 Do not wash water proof laundries like the raincoat bi
13. wer end of lint filter rear cover outward to disassemble it from the lint filter front cover Remove lint completely with clear water See Figure 2 Lint filter rear cover Disassembl 6 Assemble 3 Install lint filter Lint filter frontcover Peli Figure 2 Cleaning the overflow filter Too much lint on the overflow filter will influence the normal usage of the machine Please clean it every two months Elastic fixin 1 Take off the overflow filter claw As indicated in the figure nip the elastic fixing claw and pull it to the direction of the arrow to take it off Me at 2 Cleaning the overflow filter 2 Take off the corrugation pipe Dismantle the upper part of the corrugation pipe inside the overflow filter as indicated in Figure 1 Cleaning the overflow filter Clean the lint around the filter and flush with tap water Install the overflow filter 1 Install the corrugation pipe 2 Insert the mounting plate at the bottom of the filter into the valve cover 3 Hang up the hook at the left upper side 4 Push the upper part in as indicated in Figure 2 Water level adjusting lever Corrugation Dj ipe gt Figure 2 Disposal of the complete unit Wipe the complete unit with soft cloth twisted dry Wipe with neutral detergent if too dirty e Do not wash it directly by water e After washing dismount the water inlet hose Do not store water in th
Download Pdf Manuals
Related Search