Untitled - Billebro
Contents
1. 11 Only use attachments accessories specified by the manufacturer 12 Use only with a cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over 13 Unplug this apparatus during lighting storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Serving is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped WARNING To reduce the risk of the fire or electric shock do not expose this apparatus to rain or moisture The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on the apparatus CAUTION To reduce the risk of electric shock do not CAUTION f RISK OF ELECTRIC SHOCK remove any cover No user serviceable parts inside DO NOT OPEN The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert Refer servicing to qualified service personnel only A the use to the presence of un insulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock2. III Mi ri tit it It if in Coco o MIC LEVEL o e 12 12 MIC TREBLE 12 12 MIC BASS MIC OFF ON TALK OVER CITRONIC LLZ ECH AUTO PAN FLANGEA MANUAL FILT AUTO FILTER REVERS TRANS PITCH SHIFTER x A CG MASTER MANUAL AUTO FILTER e FILTER FLANGER e REVERB EN e TRANS ECHO e PITCH SHIFTER e SEND RETURN MIN MAX EFFECTS X PARAMETER Y PARAMETER SELECT LEVEL DEPTH TIME 4 B 16 32 OFF m EFFECTS MIX GOU e a a MASTER 10 a CUE LEVEL Cc CH1 CH2 man CUE MIXING I I PFL MASTER CITRONIC SMFX 200 m emet lt IMPORTANT SAFETY INSTRUCTIONS 1 Read these Instructions 2 Keep these Instructions 3 Heed all Warnings 4 Follow all Instructions 5 Do not use this apparatus near water 6 Clean only with a dry cloth 7 Do not block any of the ventilation openings Install in accordance with the manufacture s instructions 8 Do not install near nay heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized plug The wide blade is provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plug convenience receptacles and point where they exit from the apparatus
3. IMPORTANT SAFETY INSTRUCTIONS The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operation and maintenance servicing instructions in the literature accompanying this appliance CAUTION To prevent electric shock do not use this polarized plug with an extension cord receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure FEATURES e 8 digital effects 3 digital effects for crossfader e 3 Kind of channel fader Curve mode e Big LCD with Back light e Channel and Crossfader Start function e Send Return function e 3 Band Kill EQ for each channel e 2 USB Jacks for PC Playback and Recording e VCA Controlled channel and crossfader PART NAMES AND FUNCTIONS CH USB 1 AUX PH o 10 MIC LEVEL 12 12 MIC TREBLE 12 MIC BASS MIC OFF ON TALK OVER MIC MASTER e e SELECT EFFECTS ae tT i D amp E MANUAL AUTO FILTER e FILTER 10 MIN max HIGH EFFECTS X PARAMETER Y PARAMETER LEVEL DEPTH OFF III AUTO FFECTS MIX a MASTER o 10 CUE LEVEL CH1 CH2 8 CUE MIXING I I PFL MASTER CITRONIC T SMFX 2 00 FX ON a w PART NAMES AND FUNCTIONS 1 Source input selector switch These switches are used to select the input source assigned to each channel Each channel may only be assigned one input source at a time 2 Input gain These knobs are used to adjust the audio sour
4. als Connect each of your turntable ground leads to either of the two ground terminals 45 USB socket Use the accessory USB cord to connect to a PC 46 Fader start control jacks Connect these jacks to the fader input jacks of the CD player using the 3 5mm stereo mini o D tand m JI Citronic oi oF POWER on kaal gt BALANCE OUTPUT 84 6 GD EI G9 ED A L ei va LI TO QUICK SETUP DIAGRAM Study this setup diagram Make sure all faders are at zero and all devices are off First connect all input sources and processors Next connect your microphone and monitor headphones Finally connect the stereo outputs to the power amplifier s and or audio receivers such as tape decks Plug your mixer into AC power Now you are ready to switch everything on IMPORTANT Always switch on your audio input sources such as turntables or CD players first then your mixer and finally any amplifiers When turning off always reverse this operation by turning off amplifiers then your mixer and then input devices Turntable OUTPUT ore POWER ou L OR LOME OJ k S pa A u p p y ACIN Be i REI OUTPUT Power Amp oo oO OD OQoooo Sound system Effector SPECIFICATIONS Model SMFX200 2ch DJ mixer Power AC 100 240V 60 50Hz 14 Watts Dimensions 223 W x 296 7 D x 105 9 H mm Weight ca 6 kg Input output impedance amp sensiti
5. ce signal input gain for a channel Never use the gain control to adjust a channels output volume Setting the gain level properly will ensure a clean output signal 3 Channel EQ control These knobs are used to adjust the high mid and low range levels of a channel allowing for a maximum midrange gain of 10dB or maximum decrease of 35dB Turning the knob in a counterclockwise direction will decrease the amount of high mid low range applied to a channel signal turning the knob in a clockwise direction will increase the amount of high mid low applied to a channel signal 4 Mic level Adjusts microphone level 5 Mic treble bass EQ These knobs are used to adjust the treble or bass levels of the microphone with a maximum signal gain of 12dB or maximum signal decrease of 12dB Turning the knob in a counterclockwise direction will decrease the amount of treble or bass applied to the microphone signal turning the knob in a clockwise direction will increase the amount of treble or bass applied to microphone signal 6 Channel fader Adjusts the volume for CH1 and CH2 7 Mic ON OFF Talkover switch To set mic on and off when switch at the talkover position the mic on the sound level for everything other than mic will decrease to around 14dB 8 PFL Master switch The position of this switch will determine the level meter mode In the Master position the meter will detail the out level of the left and righ
6. nel fader curve control Adjusts the curve of the channel faders between quick normal or long fade 32 Channel fader curve mode switch Used to select the channel fader curve desired 33 Headphones jack Used to connect your headphones to the mixer Rear Panel 34 Power switch Turn this unit power ON OFF 35 AC inlet Use the accessory power cord to connect to an AC power outlet 36 Master balanced output These 1 4 TRS jacks provide a balanced line level output 37 Master outputs Left 8 Right line level unbalanced RCA 38 Rec out The record out level is dictated by the channel and cross fader level it is not influenced by the master volume control 39 Send out jack Connects to the input of an outboard signal processor 40 Return input jack Connects to the output of the outboard signal processor to create an effect loop 41 Line input jacks These jacks are inputs for any line level device 42 Ph Aux input jacks These jacks are inputs for a phono RIAA stage for magnetic MM cartridge or a line level device Rear Panel 43 Aux Phono selector switches These switches are used to change the mode of phono input jacks When connecting turntable to these jacks be sure the switch is in the phono position and when using line level input devices select AUX Always be sure main power is shut off before change the position of the Aux Phone selector switch 44 GND termin
7. ore than 70dB 1KHz between L and R channel More than 70dB 1KHz between channels SPECIFICATIONS EQ Mic 12 2aB 12 2dB at 100Hz 12 2aB 12 2aB at 10KHz Channel 10 2dB below 32dB at 70Hz 10 2dB below 32dB at 1KHz 10 2dB below 32aB at 13KHz Channel balance Within 3dB from 0 to 40dB Fader kill More than 80dB at 1KHz for channel fader and crossfader Mic talkover 14 2dB USB section EQ flat FX OFF W 20KHz LPF master output load 100K ohm Playback Output OdBV 1V 2dB 20dBfs 1KHz Maximum gain THD N Less than 0 04 OdBfs 1KHz gain at 3 position master OdBV out Frequency i a response 31 20KHZ 2dB Gain at center S N ratio More than 80dB A weighted gain at center CH separation More than 70dB at 1KHz OdBis A weighted gain at center Recording and playback Line 1KHz 14dBV input gain maximum Output 4dBV 1 6V 2dB THD N Less than 0 15
8. t channels In the PFL position the left side of the meter will indicate monaural level of the PGM 9 Crossfader Used to mix the signals from the 2 channels 10 FX ON button This button functions as an effect Master on off button and is used to activate and deactivate the effects 11 Cue mixing Used to preview channel audio to your headphones Listen here before bringing up channel faders or moving the crossfader 12 Cue level This knob is used to adjust the headphone output level 13 Master knob Adjust the level of the master output 14 Level meter The dual LED s indicators are used to detail either the master output level a combination of the master output level or the PGM monaural level 15 Effect select knobs Used to select the type of effect mix desired 3 functions Echo Zip and Roll can be choosed 16 Effects cue Used to select the beat effects to be monitored with headphones 17 Effects mode switch Used to select the desired crossover effect mode e Fader In this mode you can use the crossfader to control the crossover effects and perform start stop recue functions e Off Crossover effects are disabled e Auto In this mode you don t have to use the crossfader simply push one of the buttons and the mix will be done automatically in full beat sync 18 TAP BPM button Tap this button to switch TAP BPM function 19 Effect beat selector buttons To selec
9. t different beat also change the time parameter accoding to the measured BPM of the effector 20 Depth feedback parameter Y Used to adjust the value of the parameter Y mix ratio or resonance or feedback of the effector 21 Time array parameter X Used to adjust the value of the parameter X time of the effector 22 Effects selector Used to select desired effects 23 Input selector Used to select the source to be effected 24 Effects indicator When any of the effects are in use these indicators will grow to match any of the effects that may be functioning 25 Depth feedback display The depth feedback digital display will indicate the parameter ratio percentage 26 Time array display This display will signify the pitch percentage speed Any adjustments will be based on this default setting 27 BPM display This meter will display the source BPMs to be effected Front Panel m eae tal 28 Mic input jack This jack will accept a standard 1 4 male plug 29 Fader start switch When the unit has been connected with a control cable to a CD player this is the ON OFF switch for the function to automatically start playing and stop back cue of the CD player using the channel fader or crossfader 30 Crossfader curve switch Used to select the rising curve patterns for the crossfader function 31 Chan
10. vity EQ flat maximum gain FX OFF load 100K ohm Input impedance and reference level Line 10K ohm 14dBV 0 1dB 200mV Aux 47K ohm 14dBV 0 1dB 200mV Phono 47K ohm 50dBV 0 1dB 2mV Mic 10K ohm 54dBV 0 1dB 2mV Return 20K ohm 10dBV 0 1aB 316mV Output impedance and level Send 2 2K OHM 10dBV 316mV 2aB Rec 2 4K OHM 10dBV 316mV 2dB Master unbal 1K OHM 00B 1V 2aB di bal load 600 600 OHM 4dBm 1 23V 2dB Phones load 32 ohm 33 OHM 0aBV 1V 2aB Frequency response EQ flat maximum gain FX OFF master output load 100K ohm Line Aux 25 20KHz 2dB Phono 25 20KHz 2 3dB RIAA Mic 25 20KHz 2 3dB THD N EQ flat maximum gain FX OFF W 20KHz LPF master output load 100K ohm Line Aux Less than 0 04 20 20KHz Phono Less than 0 15 1KHz A weighted Mic Less than 0 15 1KHz A weighted Maximum input 1KHz master output THD 1 EQ flat FX OFF maximum gain Line Aux 4dBV Phono 36dBV Mic 36dBV Return 8dBV Maximum output EQ flat maximum gain FX OFF THD 1 load 100K ohm Send More than 8dBV 2 5V Master More than 18dBV 8 0V Rec More than 8dBV 2 5V Phones More than 4dBV 1 6V load 32 ohm S N ratio Maximum gain EQ Flat W 20KHz LPF A weighted FX OFF master output Line Aux More than 80dB Phono More than 69dB Mic More than 64dB Crosstalk Maximum gain EQ flat FX OFF W 20KHz LPF A weighted master output Line Aux Phono M
Download Pdf Manuals
Related Search