Installing the appliance
Contents
1. only operate the washing machine using cold drinking water Do not connect to the mixer tap of an unpressurised hot water boiler Do not use a used inlet hose Only use the inlet hose supplied or one which was purchased from an authorised specialist retailer Ifin doubt have a technician connect the appliance Water inlet Water inlet hose Caution do not kink squash modify or cut through otherwise its strength is no longer guaranteed Optimum water pressure in the supply network 100 1000 kPa 1 10 bar When the tap is on the water flow is at least 8 I min f the water pressure is higher than this a pressure reducing valve must be installed Model Aqua Stop Standard Aqua Secure devices must be completely removed and kept safe f you need to transport the appliance at a later date always refit the transport safety devices to prevent damage to the machine gt Page 6 Store the screw and sleeve screwed together Before using the appliance for the first time the 4 transport safety 1 Connect the water inlet hose to the tap Caution only tighten the screw connections by hand 2 Open the water tap carefully checking the leak tightness of the connection points Caution the screw connection is under mains water pressure Water outlet E outlet hose Caution do not kink or pull lengthways Height difference between the installation surfac2. 0 000 cee 4 mm Levelling s2ese544n6 es oo559 ea eee sa bx 5 M Electrical connection 008 5 E Transportation e g when moving house 6 Technical specifications 0 8 6 Agqua Stop warranty sssusa aaaea aaa 7 Do not operate the washing machine until you have read these instructions Please also observe the separate instruction manual Keep all the documents in a safe place for future reference or to pass on to the next owner
3. MZ 2200 WX 9756 CZ 110600 Z 7080X0 i Installation on a wood joist floor If possible place the washing machine in a corner Screw a water resistant wooden board min 30 mm thick to the floor The feet of the washing machine must be secured with holding brackets See above for order no Installation on a platform with drawer Order no WMZ 20460 WZ 20460 Installing the appliance A Install the appliance before connecting it to the power supply Installation in a kitchenette underneath the worktop or fitted in a cabinet i Recess width of 60 cm required Only install the washing machine underneath a continuous worktop that is securely connected to adjacent cabinets i Installation underneath the worktop Risk of electric shock Instead of the appliance covering plate you must have a metal cover fitted by an expert Order no WMZ 2043 WZ 20430 Recess width of 60 cm required Aqua Secure a Aqua stop Mains cable Water inlet Water outlet Spanner _ _ i _ depending on model Covers with hose clip Elbow for fixing the drainage hose in place Also required depending on the connection 1 hose clamp 24 40 mm specialist retailers to connect to a siphon gt Page 4 water connection Useful tools Spirit level for levelling Spanner with WAF 13 for loosening the transport safety devices gt P
4. Safety instructions Moisture inside the drum is due to final testing Scope of deli ver i4 027012141011010 R0 01110103 Removing the transport safety devices WELA connection 027012141011010 R0 111010 The washing machine is heavy take care when lifting Caution frozen hoses can crack burst Do not install the washing machine outdoors or in areas exposed to frost The washing machine could be damaged Do not lift the appliance by protruding components e g the washing machine door In addition to the instructions provided in this document special regulations from the relevant water and electric utility companies may apply Ifin doubt have a technician connect the appliance Route hoses and cables in such a way that there is no risk of tripping Environmenitally friendly disposal K Dispose of packaging in an environmentally friendly manner This appliance is labelled in accordance with European Directive 2002 96 EC on Waste Electrical and Electronic Equipment WEEE The directive provides an EU wide framework for the return and recycling of used appliances Installation surface The machine must be stable so that it does not move around The surface on which it is installed must be firm and level Soft floors floor coverings are not suitable Installation on a pedestal A N The feet of the washing machine must be secured with holding brackets Order no W
5. age 3 and WAF 17 for aligning the appliance feet gt Page 5 Hose and cable lengths 027012141011010 R0 01410102 a T DFs Di D om o 120 cm 34 5m o 00cm L SX 95cm 140 cm fad Note Using hose clips limits the possible hose lengths Available from specialist retailers the after sales service Extension for Aqua Stop and cold water inlet hose approx 2 50 m Order no WMZ2380 WZ10130 CZ11350 Z7070X0 Longer inlet hose approx 2 20 m for standard model AN Before using the appliance for the first time the 4 transport safety devices must be completely removed and kept safe Ifyou need to transport the appliance at a later date always refit the transport safety devices to prevent damage to the machine gt Page 6 Store the screw and sleeve screwed together ie 2 gt Risk of electric shock Do not immerse the Aqua Stop safety device in contains an electric valve water To prevent leaks or water damage observe the instructions in this section Caution only operate the washing machine using cold drinking water Do not connect to the mixer tap of an unpressurised hot water boiler Do not use a used inlet hose Only use the inlet hose supplied or one which was purchased from an authorised specialist retailer Ifin doubt have a technician connect the appliance Water inlet Water inlet hose Caut
6. anies may apply Ifin doubt have a technician connect the appliance Route hoses and cables in such a way that there is no risk of tripping Mains cable Water inlet Water outlet Spanner depending on model This appliance is labelled in accordance with European Directive 2002 96 EC on Waste Electrical and Electronic Equipment WEEE The directive provides an EU wide framework for the return and recycling of used appliances R Dispose of packaging in an environmentally friendly manner with hose clip Elbow for fixing the drainage hose in place Installation surface Also required depending on the connection e a The machine must be stable so that it does not move around 1 hose clamp 24 40 mm specialist retailers to connect to a siphon The surface on which it is installed must be firm and level gt Page 4 water connection Soft floors floor coverings are not suitable Useful tools Installation on a pedestal Spirit level for levelling l l Spanner with The feet of the washing machine must be secured with holding brackets WAF 13 for loosening the transport safety devices gt Page 3 and Order no WMZ 2200 WX 9756 CZ 110600 Z 7080X0 WAF 17 for aligning the appliance feet gt Page 5 Installation on a wood joist floor A N If possible place the washing machine in a corner H ose an oj cab l e l eng th S depending on moael Screw a wate
7. e and the drain O max 100 cm Outlet into a sink Caution secure the drain hose so that it cannot slip out Caution the plug must not block drainage from the sink During pumping check whether the water is draining away quickly enough The end of the drain hose must not be immersed in the water that is pumped out This would result in the risk of water being sucked back into the washing machine Drainage into a siphon Caution the connection point must be secured with a hose clamp 24 40 mm specialist retailers Outlet into a plastic pipe with rubber bushing or into a drainage pit Caution secure the drain hose so that it cannot slip out Levelling A Intense noise vibrations and wandering may be the result of incorrect levelling Transportation e g when moving house 1 Before transporting the washing machine a 1 Loosen the lock nut using a spanner by turning it in a clockwise direction Turn off the tap Drain residual detergent solution gt nstruction manual Maintenance drain pump Reduce the water pressure in the inlet hose gt nstruction manual Maintenance filter in water inlet Disconnect the washing machine from the power supply Disconnect the hoses Install the transport safety devices Levelling the washing machine with a spirit level se I 2 Change the height by turning the appliance feet Caution all four appliance feet must be firmly on the gr
8. ion do not kink squash modify or cut through otherwise its strength is no longer guaranteed Optimum water pressure in the supply network 100 1000 kPa 1 10 bar When the tap is on the water flow is at least 8 I min f the water pressure is higher than this a pressure reducing valve must Model Aqua Stop Aqua secure Connect the water inlet hose to the tap Caution only tighten the screw connections by hand Open the water tap carefully checking the leak tightness of the connection points Caution the screw connection is under mains water pressure Water outlet Water outlet hose Caution do not kink or pull lengthways Height difference between the installation surface and the drain O max 100 cm Outlet into a sink Caution secure the drain hose so that it cannot slip out Caution the plug must not block drainage from the sink During pumping be installed Standard check whether the water is draining away quickly enough The end of the _ drain hose must not be immersed in the water that is pumped out This would result in the risk of water being sucked back into the washing machine Drainage into a siphon Caution the connection point must be secured with a hose clamp 24 40 mm specialist retailers Outlet into a plastic pipe with rubber bushing or into a drainage pit Caution secure the drain hose so that it cannot slip out Levelling A Intense noise vibrati
9. liances with Aqua Stop do not need to be supervised during operation nor secured Check the levelness of the washing machine with a spirit level and adjust if necessary afterwards by turning off the tap The tap only needs to be turned off if you are away from home for a long period e g for several weeks holiday 1 Remove the covers After sales service Installation i i Instructions en 3 Tighten the lock nut against the housing If you cannot rectify a fault yourself Instruction manual What do to if Page 12 13 In doing so hold the foot tight and do not adjust its height please contact our after sales service We can always find a suitable remedy so that a Caution the lock nuts on all four appliance feet must be screwed tightly technician is not called out unnecessarily against the housing 2 Insert all 4 sleeves The contact details for your nearest after sales service can be found here or in the After sales Clamp the mains cable to the holders Insert and service directory depending on the model tighten the screws Please give the after sales service the product number E no and the production number FD of the appliance ne in OPON Contents Page 7 7 m is information can be found Electrical connection a aiericere E Safety instructions 06 eevee i l 2 After transportation the transport safety devices must be removed gt Page 3 service flap and on the back of the appliance E E
10. ng connection Nominal voltage 220 240 V 50 Hz Do not use multiple plugs couplings or extension cables Nominal current 10 A Nominal power 2 300 W Q lf a residual current circuit breaker is used only use a type which displays this Water pressure 100 1000 kPa 1 10 bar symbol Ex i Only this symbol guarantees compliance with the currently applicable regulations QO Mains plug do not plug in to pull out of the socket with damp hands when removing the plug from the socket pull the plug body only not the cable never pull the plug out during operation Manufacturer gt Instruction manual Aq ua e 0 0 Warran ty Only for appliances with Aqua Stop In addition to warranty claims against the vendor from the purchase agreement and in addition to our appliance warranty we will pay damages under the following conditions Washing machine 1 Ifa fault in our Aqua Stop system causes water damage we will reimburse damages caused to private customers 2 The liability warranty is valid for the service life of the appliance 3 A warranty claim is only valid on condition that the appliance fitted with Aqua Stop has been correctly installed and connected according to our instructions This condition includes the correct fitting of an Aqua Stop extension genuine accessory Our warranty goes not cover defective power cables or fittings between the Aqua Stop connection and the tap 4 Appliances with Aqua Stop do no
11. nvironmentally triendly disposal 1 The eo Hee ey on connected to an alternating current via a D Production number depending on model Installation surface 222 1 properly instaved earned Socket TES E Installing the appliance 000 1 ie m To prevent unused detergent from flowing straight into the drain during the next wash The power supply and voltage indicated on the washing machine rating plate You can rely on the competence of the manufacturer Please contact us M Scope of delivery aa 2 ane ae T A g g g n i Pour 1 litre of water into compartment II and start the Empty programme This way you can ensure the repair is carried out by trained service technicians who are B oe and Cable Enote eose ecu encemnn 9 equipped wi Ul r rts The connected load and fuse required are specified on the rating plate o MEP g aoe p ee eee safety devices lt z oe I I Oe RR RH RR EE ee l O m m PCV CINGG oo oe 5 oa RRA AA A EAA 5 ee once MER ko Technical specifications E Electrical connection 0 005 5 i M Transportation e g when moving house 6 the cable cross section is adequate E Dimensions width x depth x height 60 x 59 x 85 cm E A gee stone a j Ono 6 the earthing system is properly installed Weight gae Be ka denendoc ormoda Aqua Stop warranty asses a aeaa aa T The mains cable may only be replaced by a q
12. ons and wandering may be the result of incorrect levelling Transportation e g when moving house Aq ua St 07 0 warran ty Only for appliances with Aqua Stop ae Before transporting the washing machine In addition to warranty claims against the vendor from the purchase agreement and in Washing machine addition to our appliance warranty we will pay damages under the following conditions 1 Ifa fault in our Aqua Stop system causes water damage we will reimburse damages caused ie Levelling the washing machine with a spirit level a 1 Turn off the tap to private customers Bee cocire in tha inlet hose gt Instruction manual Maintenance filter in a L ENAT or the service life of the appliance OO OOOO O O O OO 1 a the lock nut using a spanner by turning it in a clockwise water inlet 3 A warranty claim is only valid on condition that the appliance fitted with Aqua Stop has been VREUR 4 Disconnect the washing machine from the power supply correctly installed and connected according to our instructions This condition includes the 5 Disconnect the hoses correct fitting of an Aqua Stop extension genuine accessory 2 Change the height by turning the appliance feet i l Our warranty goes not cover defective power cables or fittings between the Aqua Stop Caution all four appliance feet must be firmly on the ground Install the transport safety devices connection and the tap The washing machine must not wobble 4 App
13. ound The washing machine must not wobble Check the levelness of the washing machine with a spirit level and adjust if necessary 1 Remove the covers 3 Tighten the lock nut against the housing In doing so hold the foot tight and do not adjust its height Caution the lock nuts on all four appliance feet must be screwed tightly against the housing 2 Insert all 4 sleeves Clamp the mains cable to the holders Insert and tighten the screws l 3 Electrical connection EnS ET only be connected to an alternating current via a ss A N After transportation the transport safety devices must be removed gt Page 3 properly installed earthed socket a a a E To prevent unused detergent from flowing straight into the drain during the next wash The power supply and voltage indicated on the washing machine rating plate Pour 1 litre of water into compartment II and start the Empty programme must be the same p The connected load and fuse required are specified on the rating plate 5 TF z MAS o that s Technical specifications the mains plug fits the socket O the cable cross section is adequate be Dimensions width x depth x height 60 x 59 x 85 cm the earthing system is properly installed i The mains cable may only be replaced by a qualified electrician if required _ Welght 63 83 kg depending on model Replacement mains cables are available from customer services wi
14. r resistant wooden board min 30 mm thick to the floor The feet of the washing machine must be secured with holding brackets See above for order no Installation on a platform with drawer v O i u m Order no WMZ 20460 WZ 20460 f ih 130 cm 120c Sem eo Pl Installing the appliance a gt OK S TA ies Install the appliance before connecting it to the power supply FY KAI i nF x lt TOE SRE z z z go GM 140 cm Installation in a kitchenette underneath the worktop or fitted in a cabinet D ee 2 I l Recess width of 60 cm required Only install the washing machine underneath a continuous worktop that is securely connected to adjacent cabinets Installation underneath the worktop Available from specialist retailers the after sales service Extension for Aqua Stop and cold water inlet hose approx 2 50 m Note Using hose clips limits the possible hose lengths E o aiene covering plate you must have a metal cover fitted by an expert Order Ne WMZ2380 W2Z10130 0211350 27070X0 Order no WMZ 2043 WZ 20430 Longer inlet hose approx 2 20 m for standard model Recess width of 60 cm required Removing the transport safety devices Water CONNECTION cepending on model Risk of electric shock Do not immerse the Aqua Stop safety device in water contains an electric valve To prevent leaks or water damage observe the instructions in this section Caution
15. t need to be supervised during operation nor secured afterwards by turning off the tap The tap only needs to be turned off if you are away from home for a long period e g for several weeks holiday After sales service Installation i Instructions en If you cannot rectify a fault yourself Instruction manual What do to if Page 12 13 please contact our after sales service We can always find a suitable remedy so that a technician is not called out unnecessarily The contact details for your nearest after sales service can be found here or in the After sales service directory depending on the model Please give the after sales service the product number E no and the production number FD of the appliance ne in ne foun Contents page is information can be found ei m inside the washing machine door on the open m Safety Ma B ik a pO l service flap and on the back of the appliance T A riendly disposal 3 de endin on model NStalaton SUITACE anaa ae wee ee we a a Product number Production number k Installing the appliance 0 1 You can rely on the competence of the manufacturer Please contact us M Scope of delivery 000 cee eee ees 2 This way you can ensure the repair is carried out by trained service technicians who are E Hose and cable lengths D equipped with genuine spare parts E Removing the transport safety devices 3 M Water connection
16. ualified electrician if required g FERR g Replacement mains cables are available from customer services Rains connection Nominal voltage 220 240 V 50 Hz D Do not use multiple plugs couplings or extension cables Nominal current 10 A Nominal power 2 300 W fa L ia current circuit breaker is used only use a type which displays this Water pressure 100 1000 kPa 1 10 bar Do not operate the washing machine until you have read these instructions symbol l l Only this symbol guarantees compliance with the currently applicable regulations A Pig ras oe sl Prete slecicr Wide ete once aparon Q Mains plug the next owner do not plug in to pull out of the socket with damp hands when removing the plug from the socket pull the plug body only not the cable never pull the plug out during operation Manufacturer gt Instruction manual Safety instructions The washing machine is heavy take care when lifting Aqua Stop Aqua Secure Standard z Moisture inside the drum is Scope of delivery 0 c7012141011010 K001 141010 3 due to final testing Caution frozen hoses can crack burst Do not install the washing machine outdoors or in areas exposed to frost The washing machine could be damaged Do not lift the appliance by protruding components e g the washing machine door In addition to the instructions provided in this document special regulations from the relevant water and electric utility comp
Download Pdf Manuals
Related Search