M10-AC250-1 Series.cdr
Contents
1. solderingirons or gunsaway from theequipment Allow the equipment to stabilize at room temperature before taking up measurement important for exact measurements Use caution when working with voltagesabove 35V DC or 25V AC These voltages pose shock hazard Periodically wipe the cabinet with a damp cloth and mid detergent Do not use abrasives or solvents The meter is suitable for indooruse only Do not operate the meter before the cabinet has been closed and screwed safely as terminal can carry voltage Do not storethe meter ina place of explosive inflammable substances Do not modify the equipment inany way Do not place the equipment face down on any table or work bench to prevent damaging the controlsat the front Opening the equipment and service and repair work must only be performed by qualified service personnel Measuring instruments don t belong to children hands Cleaning the cabinet Clean only witha damp soft cloth and a commercially available mild household cleanser Ensure that no water gets inside the equipment to prevent possible shorts and damage tothe equipment 1 The model M10 AC250 1 is avoltage adjustable AC power supply Output voltage is continuously adjustable The unit isin small size good performance and novel appearance It is an ideal power supply unit for school 1 Specifications 1 1 Input Voltage 230 220 VAC 1 2 Output Voltage 0 260VAC 1 3 Output Current Max 5A 1 4 Output Power M2. Power switch turn on the switch then the power supply works Output fuse protect output from overloading and it cabbe reset Voltage output adjusting knob adjust the output voltage continuously from Display indicating outputcurrent and voltageby LED Output terminal outlet connecting the terminal of AC load d va oe 0 4 Input fuse protect input from overloading oe 6 7 Output terminal safety socket connecting the terminal of AC load a M10 AC250 1 2 2 Operating lab electronics 2 2 1 First connect the load to the power supply After the unit is switched on output AC POWER SUPPLY voltage and current will be indicatedby LED 2 2 2 Turing the outputvoltage adjustment knobto adjust the voltage 2 2 3 The outlet and safety socket can beused at the same time withinthe rated power 2 2 4 If theinput overloading protection fuse works checkthe input source whether it is overload or other problems then solve the problem and replace the input fuse before use the power supply again If the output overloading protection fuse works check the load whether it is overload or other problems then solve the problem and press thered button before use the power supply again 3 Caution When operating is finished put it in a dry place of good ventilation and keep it clean If itis not inuse for along period pull off the power supply plug for storage For maintenance input voltage must be cut off 4 Accessories Us
3. ax 1300VA 1 5 Display Accuracy Voltmeter 2 5 Rdg 2digits Ampmetert 2 5 Rdg 2digits 1 6 Protection Over current 1 7 Dimension WXH XD 260X 160X340 mm 1 8 Weight 17kg 2 Operation 2 1 Controls anddescription of front panel 5 AC POWER SUPPLY OUTPUT VOLTAGE 0 260V oe oe AC OUTPUT iy j 5A 230V 000 6 AC OUTPUT 0 260V
4. er s Manual 1 Fuse 2 Shanghai MCP Corp Safety Precautions This product complies with the requirements of the following European Community Directives 2004 108 EG Electromagnetic Compatibility and 2006 95 EG Low Voltage and CE Marked To ensure safe operation of the equipment and eliminate the danger of serious injury due to short circuits arcing the following safety precautions must be observed Damages resulting from failure to observe these safety precautions are exempt from any legal claims whatever Do not use this instrument forhigh energy industrial installation measurement Do not placethe equipment ondamp or wetsurfaces Replace a defective fuse only witha fuse ofthe original rating Never short circuit fuse or fuse holding Check test leadsand probes for faulty insulation orbare wires before connection to the equipment To avoid electric shock do not operate this product in wet or damp conditions Conduct measuring works only in dry clothing and rubber shoes 1 e on isolating mats Never touch thetips of thetest leads or probe Comply with the warning labels andother info onthe equipment The measurement instrument is not to be to operated unattended Do not subject the equipment to direct sunlight or extreme temperatures humidity or dampness Do not subject the equipment to shocks or strong vibrations Do not operate the equipment near strong magnetic fields motors transformers etc Keep hot
Download Pdf Manuals
Related Search