High Definition Digital Terrestrial Receiver USER`S MANUAL
Contents
1. Component better and HDMI best A High Definition Multimedia Interface If your TV has an HDMI socket connect an HDMI cable between the HDMI socket on the SRT 5429 socket 2 and the HDMI socket on your TV A HDMI connection incorporates video and audio You do not need to make separate connections for audio A HDMI cable is not provided with the SRT 5429 HOTY Interface mi Lost gt Connect to an HOMI socket on the rear of your TW HOMI cable must be purchased separately B Y Pb Pr Component using a RCA blue red green cable For Component video connect to your TV with a Y Pb Pr Component cable with blue red and green leads Connect the leads between the Y Pb and Pr sockets on the SRT 5429 socket group 6 taking care to match the colour of a lead with the colour of the socket and the corresponding Component sockets on your TV Ihe Component sockets on the TV have the same colour coding You will need to make separate connections for left and right audio via the audio sockets in socket group 4 This can be done using the supplied RCA cable Match the colour of the plugs with the colour of the sockets mt Green TV Interface TY Interface C CVBS Composite using the supplied RCA red white yellow cable Using the appropriate socket colour coding on sockets 4 and 7 you can connect to your TV with the supplied red white yellow RCA cable This gives you CVBS Composite Video and MPE2. Errone SRT 5429 High Definition Digital Terrestrial Receiver USER S MANUAL Important Safety Instructions To avoid electric shock do not open the unit There are no user serviceable parts inside Servicing can only be performed by qualified service personnel Connection can only be to a 240V AC mains supply All safety and operating instructions should be read before the product is operated All warnings on the product and in this user s manual should be adhered to The antenna cable must be earthed Do not use attachments not recommended by the product manufacturer as they may cause hazards or damage the equipment Do not overload adaptors wall sockets or extension cables as this can result in unit failure or electric shock For cleaning use only a dry or lightly dampened cloth Do not use liquid cleaners or aerosol cleaning products Do not place this product on an uneven surface Do not block the ventilation slots on the top of the unit Overview Thank you for purchasing this Strong Digital Terrestrial Television Receiver This product has been manufactured in accordance with strict quality control procedures and is fully compliant with Australian specifications Your new receiver will enable you to experience superior picture and sound quality widescreen images extra channels plus a variety of new features e Foracomplete list of all of our digital television receivers terrestrial and satellite
3. please go to our website www strong com au e For general enquiries please email us at tech strong com au e For technical assistance please call our Technical Support Help Line on 1 800 820 030 Main Features High Definition Multimedia Interface HDMI output Component output Y Pb Pr Composite output Multi video definitions 5761 576p 720p 1080i Fully featured infra red remote control Tuner loop through Favourite channels and stations list 16 9 and 4 3 aspect ratios Subtitles 8 timer event settings COFDM demodulation Decodes high definition and standard definition broadcasts Dolby Digital audio output S PDIF coaxial USB2 0 Host for Video amp MP3 Playback and JPEG Viewing Auto and manual channel searching Band selection 7M amp 8M CD quality audio stereo EPG Electronic Program Guide Signal level and quality indicators Parental guidance locking USB port for software upgrades DVB T and MPEG 4 H 264 compliant Contents Important Salety Instruccional do 2 A O ete E E O ie eme eve stages ee sense 3 Mall Features a A AN A OA A A RA 3 Checklistof ACCESSOMES a Aaaa AEAEE ANER EAA RAA AEE 5 COMUEOIS AlnG INGICALONS nn detente dido 6 Front panela Error Bookmark not defined Rear ocio PA oo o enteric d ana aoe ace Oe latte cea sad etnetd bia pense ae a 7 Remote CONTO ce ace cae es ce A ah cane neh eee care 8 Installing the batteries in the remote control sn 9 HOW tO CONNEC raia aa Aa aa a ca c
4. 29 30 8 PAGE 4 To move to the next or previous page 9 CH A V To change the channel or to move the cursor up or down in a menu 10 SUB To turn subtitles on or off 11 AUDIO To choose speakers left right or stereo audio format and audio language 12 FAV To display the favourites list in viewing mode and to select a favourite 13 PAUSE To freeze the screen 14 DVR To Access DVR Menu directly 15 To fast rewind a movie or music track 16 To fast forward in a movie or music track 24 TIMER To access timer menu directly 17 BI To go to the end of a movie or music 25 INFO To show information about the track or show the next photo current program 18 MUTE To turn the sound on or off 26 ASPECT To cycle through the aspect 19 FORMAT To cycle through the video ratios 16 9 and 4 3 definitions 576i 5760 7200 and 1080i 20 21 22 23 27 STOP To stop a movie or music track or BACK To return to the previous channel or to stop recording a movie station 28 e To start recording a movie EXIT To close the current menu and return to normal viewing 29 P Il To start or pause a movie or music track A V To change the channel or to move the cursor up or down in a menu 30 PPI To go to the end of a movie or music track or show the next photo VOL 4 gt To change the volume in viewing mode or to change an option or setting in a menu Installing t
5. Strong website for announcements of software upgrades 1 Once you have obtained an upgrade file transfer it to a USB memory stick You need to place the file at the root or top level on the memory stick not inside a folder or directory 2 Insert the stick in the USB port on the rear of the SRT 5429 32 3 Press MENU on the remote control The Main Menu screen appears 4 If USB is not highlighted on the menu press or until it is and then press OK The USB window appears 5 Select USB Update and press OK Receiver will automatically search for software file on USB memory stick and will load new software on to receiver NOTE the updated file must be STRONG5429 AP They must be at the root level on the memory stick not inside a folder or directory 33 Clearing and resetting data You can reset the SRT 5429 by restoring the unit to the default settings it had when it left the factory This clears all channels stations preferences and other user settings You will need to rescan for channels and stations before you can continue watching digital TV or listening to digital radio WARNING This procedure returns the SRT 5429 to its default factory settings All data such as time zone channels stations and timers will be lost 1 Press MENU on the remote control The Main Menu screen appears 2 If System Settings is not highlighted on the menu press or gt until it is and then press OK The System Settings me
6. station as a favourite or to mark it for removal from your favourites list An icon of a heart appears beside the channel or station name fo indicate that it is to become a favourite or the icon disappears if it was already a a favourite If you want to select another channel or station as a favourite repeat from step 4 Press EXIT A message appears asking you to confirm that you want to save the changes To Save Select Yes To cancel Select NO NOTE You can delete channels and stations that you are never likely to watch or listen to If you want to re instate a channel or station that you have deleted you will need to rescan for it See Rescanning for channels and stations on page 24 for instructions USB To play USB files record a program or update software through USB port The USB function supports a number of file formats TS TRP DAT MPG MPEG AVILAKV MOV MP4 VOB 3PG MP3 WMA ACC BMP JPG PNG and so on 1 Press MENU on the remote control The Main Menu appears 2 If USB is not highlighted on the main menu press or gt until it is and then press OK The USB menu appears 21 USB Update If a new version of software for the SRT 5429 becomes available you can download the software to your PC and then transfer it to youn SRT 5429 You will need a USB memory stick not supplied with the SRT 5429 Visit the Strong website for announcements of software upgrades 1 Once you have obtained an upgrade file trans
7. when you press GUIDE is information about the channel that is showing at the time At the left of the screen is information about the current channel list at the right of the screen Is a list of Upcoming programs To display information about the programs on another channel press w or a until the channel you want information about is highlighted at the left of the screen To display more information than is currently shown about a selected channel you can move the channel name pane at the left of the window and move the program name pane amp press OK at the right of the window and vice versa e To move to the program pane press OK e To display program information for next day press INFO key to step through the days e To display program information for previous day press SUB key to step through the days e To scroll through the programs for a day press w or A e To move back to the channel list in the left pane of the window press or gt Selecting a channel to watch from the EPG Il With the channel name panel selected press CHY or CHA until the channel you want to watch is selected 2 Press GUIDE The current program of the selected channel is now showing Reserve Rec Press AUDIO button the green button to set a timer 24 Rescanning for channels and stations The Install option on the main menu enables you to scan for that is detect digital TV and radio stations available in your area You wil
8. 2 If User settings is not highlighted in the main menu press w or a until it is and then press OK The User Settings menu appears 3 If Timer is not highlighted press w or a until it is and then press OK The Schedule window appears 30 5 All the timer options should now be available to you see below Press CHW Or CHA to activate to select a timer you want to set You can Edit and Delete the timer 6 lf you have selected a timer that has already been set and want to edit it press the AUDIO key the green button to edit the timer 7 If you have selected a timer that has already been set and want to cancel it press Timer key the blue button to delete the timer 8 All the timer options should now be available to you see below Press CHw to select the Channel Type option Press VOL4 or VOL to set channel type You can set channel type to TV or Radio 9 Press CHW to select the Channel No option Press VOL4 or VOLE to select the channel you want displayed 10 Press CHW to select the Start Date Start Time or End time options Use the number keys on the remote control to enter the time you what the to turn on or turn off Note that times must be entered using the 24 hour clock format For example 8 o clock in the morning is entered as 0800 while 8 o clock in the evening is entered as 2000 11 Press CHw to select the Repeat option You can set the timer to Once Daily or Weekly Press VOL 4 or voL until the ti
9. 62 2 Male Frequency range 174MHz 230MHz 47 AMH7 868MHZ be amp Channel Decoder sa z IF bandwidth 7 and 8 MHz switchable Code Rate 1 2 2 3 3 4 5 6 7 8 Guard Interval 1 4 1 8 1 16 1 32 MPEG Transport Standard MPEG 4 MP L4 0 1920 x 1080 50MHz acon 64 Mbps Profile Level MPEG 4 MP L4 0 1920 x 1080 50MHz Input Rate 80 Mbps Video Decoding E Aspect Ratio 4 3 Letter Box 16 9 Pan amp Scan Standard MPEG Layer 1 2 3 Dolby AC 3 12S S PDIF Audio Decoding Chen ER Single Dual Mono Stereo Joint Stereo Dolby Digital bit streams ARM926 Main System Memory AMD Flash 128Mb SDRAM HDMI 1 2 connector with HDCP copy HDMI protection Y Pb Pr Component YUV Power Supply Benion W250mm x H38mm x D175mm case only 185mm to end of connectors Physical Video Resolution 1080i 720p 576p 576i Weight 1 38 kg Optimum operating temperature 0 50C 37 TRONG 7 60 WEDGEWOOD ROAD HALLAM VICTORIA 3803 PH 61 3 8795 7990 FAX 61 3 8795 7991 TECHNICAL SUPPORT 1800 820 030 STRONG amp CO FAR EAST LTD P O BOX 85 YOKOHAMA KANAGAWA KEN JAPAN 231 91 FAX 81 45 651 1842 www strong com au Email techOstrong com au Strong Australia Pty Ltd 2010
10. AUDIO Selecting a Partition and Partitioning your USB HDD How do choose and set different partitions from my HDD Usually there are several partitions available in HDD s and our STB can allow you to choose different partitions for recording purposes choose from DVR partition menu menu of Device List will popup it lists all partitions your HDD has choose the one you want and press the OK button to save Then the recorded video file will be stored into this partition The recorded file will be saved in the DVRRECORD folder WARNING Using USB1 1 or USB2 0 Key or Stick Including MP3 player 1 We strongly suggest not to record any TV program by USB Key or Stick Due to the large variety of USB Key s or Stick s being available in the market with different quality levels we cannot guarantee that your USB Key or Stick will not be damaged by attempting to record on fo if 2 Do not remove your USB device from the STB while if is in Use during any USB multimedia function Electronic Program Guide EPG broadcast information information is available electronic program guide GUIDE on the remote Some providers about their programs This on screen via an displayed by pressing control An example is shown below You can navigate through the EPG looking for information about channels and programs explained in the next section or press EPG or EXIT to close the guide Displaying program information The information displayed
11. G 4 stereo audio For video connect the yellow RCA lead between the yellow video socket socket 7 on the SRT 5429 and the corresponding socket on your TV For audio connect the same RCA cable between the white and red sockets in socket group 4 and the corresponding sockets on your TV Match the colour of the leads white and red with the colour of the sockets All three leads of the cable yellow white and red should be plugged into the same socket group on your TV TW Interface VOED BT TY Interface Step 3 Coaxial connections Dolby Digital Dolby digital bitstream audio S PDIF can be achieved using a coaxial cable This cable is not supplied The cable should be connected between socket 3 on the SRT 5429 and the S PDIF socket on your Dolby Digital decoder amplifier Optical cable Dolby Digital mb compatible Must be purchased separately amplifier Looping Out for VCR recording In order to watch one channel while recording another on a VCR connect an RF cable not supplied between the LOOP OUT socket on the SRT 5429 socket 1 and the RF IN socket on your VCR Note that VCR recordings are only analogue not digital RF cable VCR or other L h peripheral device Must be purchased separately Getting Started First time use Once you have connected the SRT 5429 to your antenna and to your television you need to 1 Turn on the television 2 Plug the SRT 5429 info mains power 4 Select th
12. Or A To select the Frequency what you wish to search 6 Press AUDIO button the green button to add the Frequency what you wish to add TIP To avoid a fruitless search check the strength and quality of the signal beforehand These are shown by the Level and Quality bars at the bottom of the screen Poor strength or quality indicates that it may be difficult to scan for that channel or that the reception might be too poor for you to comfortably watch the channel 4 Press OK to begin scanning When the search is finished the channel will begin playing if it has been found otherwise the previous channel will reappear 26 Multi language and Dolby Digital broadcasting If a channel is being broadcast in more than one audio language you can choose which language fo listen to Similarly if a channel is being broadcast in more than one audio format you can choose which format to listen to 1 Press the AUDIO button the green button on the remote control The Audio setting window appears 2 If more than one audio language or format is being broadcast pressing w or a will cycle through each language and format If a channel is being broadcast in Dolby Digital the language will be shown with an AC3 suffix as in English AC3 Non Dolby broadcasts will have an MP2 suffix as in English MPEG2 3 Press EXIT to close the Audio setting window and return to normal viewing 27 User Settings Audio Visual AV settings 1 P
13. ade edadangivhehsaascoceceeneuey E A A S 10 Step 1 Connect tothe amenna 110 A AA ES A AE os Or ae GOS yey 10 Step 2 Choose an installation method sise 10 A High Definition Multimedia Interface iii 11 B Y Pb Pr Component using a RCA blue red green cable 11 C CVBS Composite using the supplied RCA red white yellow cable 12 Step 3 Optional CONN CLIONS sine dea a aid 13 POND VAD IGM all O 13 Looping QUETO VGR TECOS 13 GOTHIING ois a E e AA E E A AN T A A eis eves A E liada 14 PISCU A O O nt esse 14 Operan O eiaa ada 15 BASIC Opera Sii id a iaa cid 15 SEISCHING ACA a id 15 PIES UG the VO MIC rada dad 16 Geiting Channel IMOMMaAlON wes eSsceei Re nn nn ne ARE SA ANNE ne ne nan 16 NVA AGIO SS WII cid 16 COS CAD OMS LS COC OPEREN 17 PACU M AS SPAS ran oia 17 Fay OUR CS IS Sn RS O tense 17 Adding channels or stations to your favourites list 18 Selecting a favourite to watch or listen O A Res 20 Organising channels and Stations ooocccccccnncnnccconcnnnnnnnnnnnnonnconnnononcnnnonnnnnnnnnnnnrnnnnnnnrnnnnnanrnnnnnnnrnrnnnnnanennss 20 A te dae ne be te en en ic ee ed AO En 0 nt te 21 VSB UDC lO senno a it se segue eens nee on nee finie 22 JSB ere Fs een ene do ete aa 22 Instructions for recording TV programs sise 22 Selecting a Partition and Partitioning your USB HDD oocccoccnnconccncnnncnnconcnnnonanncnnanoncnnannconanononancncnnannnnnns 23 WARNING tati li it 23 Electronic Program Guide EPG sin iu 23 Dis
14. e video or AV input channel to which the SRT 5429 is connected this can be done by pressing the TV AV or VIDEO button on your TV remote control Refer to your TV user s manual for instructions The Strong banner appears on your TV screen followed by a message asking if you want to automatically search for channels and stations 5 To search for available channels and stations press OK on the remote control The Auto window appears and the searching begins If you want to search for channels and stations yourself see Rescanning for channels and stations on page 24 or instructions and ignore the rest of this procedure As channels and stations are found they are displayed on the Auto window When the SRT 5429 can find no more channels and stations the search ends and one of the TV stations found will appear on the screen NOTE You can now start watching digital TV stations and listening to digital radio stations However there are settings that you should consider that will improve your enjoyment of your SRT 5429 These are explained in User Settings on page 27 But if you want to start watching TV straight away see Basic operations on page 15 for instructions Operation Basic operations Selecting a channel There are a number of ways to select a TV channel or radio station e Number pad on the remote control If you know the channel number enter the number using the numeric keys on the remote contro
15. fer it to a USB memory stick You need to place the file at the root or top level on the memory stick not inside a folder or directory 2 Insert the stick in the USB port on the front of the SRT 5429 3 Press MENU on the remote control The Main Menu screen appears 4 If USB is not highlighted on the menu press or until it is and then press OK The USB window appears 5 press w or A Select USB Update and press OK Receiver will automatically search for software file on USB memory stick and will load new software on to receiver NOTE the updated file must be STRONG5429 AP They must be at the root level on the memory stick not inside a folder or directory USB Media Press w or A to select the USB Media option then Press OK Multimedia appears If you have an external USB device connected to the receiver you will need to select which HDD you wish to access 1 HDD refers to the inbuilt 160Gb HDD 2 USB refers to the external USB HDD Press ok to select the desired HDD the Multimedia screen relevant to the particular HDD will be displayed MUSIC press 4 or Pto select Music Select the audio file what you want to play 2 PHOTO press 4 or gt to select Photo Select the photo what you want to view Press the PLAY key to view next picture 3 Movie press or to select Movie Select the video file what you want to play 4 DVR Supported Device 1 Most popular USB2 0 Hard Disk Drives are supp
16. ger is not seen in the main menu press or gt until it is and then press OK The Channel Manager menu appears Edit TV Channels Edit Radio Channels Main Meng Loir 3 If you want to make a TV channel a favourite make sure Edit TV Channels is highlighted if you want to make a radio station a favourite make sure Edit Radio Channels is highlighted With the option you want highlighted press OK A list of channels or stations appears 4 Press w or a until the channel or station you want to select is highlighted 5 Press the FAV button on the remote control to mark the highlighted channel or station as a favourite or to mark it for removal from your favourites list An icon of a heart appears beside the channel or station name fo indicate that if is to become a favourite or the icon disappears if it was already a a favourite CE If you want to select another channel or station as a favourite repeat from step 4 Press EXIT A message appears asking you to confirm that you want to save the changes To Save Select Yes To cancel Select NO Press OK to return to normal viewing Selecting a favourite to watch or listen to Press FAV on the remote control The first channel or station or channel in your favourites list appears Note that the information panel reads FAV channel Organising channels and stations The Channel Manager option on the Main Menu enables you to organise channels and stations 1 Pre
17. he batteries in the remote control 1 Press down on the retaining catch on the lid of the battery recess on the remote control and remove the lid Insert two AAA batteries into the recess Be careful to insert the batteries as shown in the diagram inside the recess Replace the lid over the recess and gently push down on the lid until it snaps firmly into place How to Connect Refer to the diagram on page 7 for the location of the sockets identified by numbers in the procedures in this section Make sure you have installed the batteries in the remote control before you begin connecting the receiver to your TV Depending on the connection method you choose you may need to adjust certain settings using the remote control before you can see a digital broadcast Step 1 Connect to the antenna Connect the antenna lead coming from your antenna wall plate to the TV ANT IN socket on the SRT 5429 socket 5 TIP You probably already have an antenna lead coming from your antenna wall plate to the TV ANT IN socket on the back of your TV If so simply unplug the lead at the TV and plug it into the TV ANT IN socket on the SRT 5429 Step 2 Choose an installation method There are a number of methods of connecting the SRT 5429 These methods are labelled A B C and D below NOTE The various video connection options available provide differing degrees of video quality In ascending order of quality these connections are Composite good
18. l and then press OK If you don t press OK the channel selected appears after approximately 2 seconds To choose a radio station using the number keys press TV RADIO first and then enter the number For example 201 is the number for ABC Dig Jazz NOTE The SRT 5429 uses the Logical Channel Numbering system LCN by default Some samples of primary LCN channel numbers are 1 Ten network and affiliates 2 ABC 3 SBS 7 Seven network and affiliates 9 Nine network and affiliates Secondary channels can be selected by pressing the primary number followed by another number For example pressing 2 gives you ABC1 and pressing 22 gives you ABC2 e Channel list Press OK on the remote control This displays the channel list To list radio stations instead of TV channels press TV RADIO before pressing OK Press w or amp on the remote control until the channel or station you want is highlighted and then press OK TIP Press the PAGE button to quickly scroll through a long list of channels 15 e Favourites list Press FAV on the remote control to see the first channel or station in your favourites list Press w or 4 to see each favourite in turn See Favourites on page 17 for instructions on creating a favourites list e Scroll Pressw or a on the remote control to scroll through the channels in channel number order You can also scroll through the channels in order by pressing the channel up and channel do
19. l need to rescan if new channels or stations become available if you want to reinstate a channel or station you have deleted or if you move to a new location There are two scanning options e Auto Search The SRT 5429 will automatically search for all digital TV and radio stations it can detect and store their details e Manual Search This option lets you search for a particular channel or all channels from a specified broadcaster Automatic Search 1 Press MENU on the remote control 2 If Installation is not highlighted on the main menu press or until it is and then press OK The Installation sub menu appears 3 If Auto Search is not highlighted on the sub menu press w or a until it is and then press OK The Auto window appears and the search begins automatically When the search is finished a channel that has been found will begin playing Manual Searching NOTE Automatic searching described above is suitable in most cases You might use manual searching if you have deleted a channel and now want to access it again In this case you would just search for that particular channel 1 Press MENU on the remote control 2 If Installation is not highlighted on the main menu press lt or P until it is and then press OK The Installation sub menu appears 3 If Manual Search is not highlighted on the sub menu press CHW or CHA until if is and then press OK The Manual Search window appears 5 Press Y
20. mer service option you want is displayed 31 12 Press CHw to select the Mode option You can set the timer to View or Record Press VOL or VOLE until the timer service option you want is displayed 13 Press the ok button on the remote control Your timer settings are saved System Maintenance You can upgrade the software in your SRT 5429 as new versions become available Information about the current version and information about the hardware is available from the menu fo help you determine if you need to upgrade This information might also be useful if you need to obtain technical support from Strong You can also reset the SRT 5429 by reinstating the default settings it had when it left the factory System information To display system information about your SRT 5429 such as the model number software version hardware version 1 Press MENU on the remote control The Main Menu screen appears 2 If System Settings is not highlighted on the menu press or until it is and then press OK The System Settings window appears Make a note of the information on this window if you are intending to contact Strong for technical support 3 Press EXIT or MENU twice fo return to normal viewing Software upgrades If a new version of software SRT 5429 becomes available you can download the software to your PC and then transfer it to youn SRT 5429 You will need a USB memory stick not supplied with the SRT 5429 Visit the
21. nch Left and right audio for Component or Right e white left Composite connection audio e red right audio ES TV ANT IN IEC 169 24 female Input from terrestrial antenna Y Pb Pr RCA RCA cinch Component connection Y Pb Pr Component green blue red 7 Video RCA RCA Composite video connection cinch yellow Note the presence of this symbol on the rear panel This indicates A that important operating and maintenance instructions accompany the product These are set out in this manual It is highly recommended that you read this manual thoroughly before using the product To reduce the risk of electric shock do not remove any panel of the SRT 5429 Even when the unit is turned off voltages may be present within it that are of sufficient magnitude to constitute a risk of electric shock Remote Control E Co S 1 STANDBY To switch to stand by mode when the receiver is on or vice versa 2 Numeric Keys 0 9 To choose a channel directly or to enter numeric information in a menu 3 TV RAD To switch between TV and radio and vice versa 4 GUIDE Electronic Program Guide To show the TV and radio program guide 5 MENU To display the main menu or return to a previous menu 6 A V To change the channel or to move the cursor up or down in a menu 7 OK To show the channel list in viewing mode and to select an item or confirm a choice in a menu 19 20 21 22 23 24 29 26 Zt
22. nu appears 3 If Factory Default is not highlighted on the menu press w or a until it is and then press OK 4 Warning message appears asking if you are sure you want to clear all services and reset all settings To continue press OK To cancel press EXIT and ignore the rest of this procedure 34 Troubleshooting There may be a number of causes of abnormal operation Occasionally receivers can hang just as a PC will do from time to time In this case you should disconnect the SRT 5429 from mains power wait 30 seconds and then reconnect it to mains power If the unit is still not operating correctly refer to the following table for the indicated problem and likely solution Symptoms Possible causes Solution Indicators on front panel do not light up No picture and sound Picture and or audio glitch Remote control is not working Music files on a USB memory stick don t appear AC power cord is not connected The cables connecting the TV and the receiver are not properly connected The TV mode is not correct Incorrect video definition Insufficient signal strength Electrical interference The receiver or TV is in mute mode Initial volume level has not been set on your TV Batteries not inserted or incorrect polarity Remote control is outside the range of operation Files are not at the root or top level 35 Check that the power cord is plugged into the wall socket Make s
23. on number PIN The default PIN is 000000 The PIN is required if you have enabled the parental lock To change the PIN 1 Press MENU on the remote control The Main Menu appears 2 If User Settings is not highlighted in the main menu press or until it is and then press OK The User Settings menu appears 3 If Parent Control is not highlighted press w or a until it is and then press OK amp Input Password The Parent Control menu appears 29 4 If Parent Lock is not highlighted press W Or A until it is and then press OK The Parent Lock menu appears You can press Or to select the Level of parental guidance All R and above AV and above MA and above M and above PG and above and G above 5 Press to move to the Change Password option Press OK to Old Password option and enter the current PIN using the number keys on the remote control If you haven t previously changed the PIN this will be the default PIN 000000 4 Press CHW to move to the New pin option and enter a new PIN A PIN must be six digits long 5 Press CHW to move to the Confirm pin option and re enter the new PIN 6 Press OK to save your changes and then EXIT to return to normal viewing Timer settings You can set up to eight timers at which specified channels can automatically be shown or recorded or to have the unit turn off Follow this procedure to set or change a timer 1 Press MENU on the remote control The Main Menu appears
24. orted by our STB however due to many types of HDD being available in the market if you find one particular HDD that does not work with our STB please kindly provide us the details and we will be happy to solve it for you if possible 2 System required FAT32 Note Instructions are included on our website on how to format your USB device into FAT32 format 22 Record Device If you have an external HDD connected press 4 or gt to select the desired HDD to use as the default drive for recording Instructions for recording TV programs 1 To record a TV program you are currently viewing press the RECORD button The default recording time is 3 Hours If you wish to edit the default recording time press the RECORD button again then manually enter the desired time using the numeric buttons 2 To record a TV program from the EPG press the EPG button select the program you wish to record using the w or a buttons then press the Reserve Rec GREEN button The program information will be displyed in the timer menu Scroll down to MODE and select RECORD then press the OK button to confirm and EXIT to return to live viewing The receiver is now set to record this program Please note that if you are watching another channel at this time the receiver will automatically change to the channel set for the recording e During recording EPG SUB Multi AUDIO functions can not be operated e Recorded TV programs will not support EPG and SUB Multi
25. playINGPrograni IMIOMIALION aristides 24 Rescanning forchannels and Stato siii 24 Multi language and Dolby Digital broadcasting 26 USES S oninia a a E E a E E ini ii ei ein aim 27 Audio Visual AVI Seting erica a E A E A E A Ron 27 Palen CONrOlL SSSR ita 28 Timer SCUNAG eein a a e E E E cie 29 System Mantenan nooo E r 31 SYSICM IO MAN il ii a ie 31 SOMWare LDOTAURS si lino ace ns 31 dearna Ai OSs AA A ent db ni nu ti dt ie 33 TFOUDIESMOOUING iisa en Dan A AAEE Ea aN aaa AAEE A ETAN E AETA 34 O A E E 35 SDECHICATIONS ESS SE ace si 36 Checklist of Accessories The following accessories have been supplied with yours RT 5429 If any were not supplied contact the retailer from whom you purchased the unit User s manual Remote control 1 Batteries AAA type CVBS Composite video and audio cable yellow white red 1 Controls and Indicators Front panel L 2 3 4 9 1 To switch the receiver between stand by mode and power on mode 2 To change the volume or next option in a menu 3 To select the previous channel or previous option in a menu 4 To display the main menu or return to a previous menu 5 To confirm menu selection Rear panel No Name Connector Function EE LOOP OUT IEC 169 24 female Loop through output to VCR etc NN HDMI HDMI cable HDMI video and audio connection ES S PDIF RCA Coaxial Digital audio output coaxial Audio Left and RCA ci
26. r vice versa Closed captions Closed captions are the spoken words written on the screen This option is particularly useful for the hard of hearing If the roots are covered by water mud or oil for too long To turn on closed captions or turn them off 1 Press the SUB button on the remote control The Subtitle window appears 2 With Off highlighted press w or a until the option you wanit Off or Language is shown 3 If the subtitles are being broadcast in more than one language and you want to choose a language other than the one shown on the screen press w to highlight the Language option and then press w or A until the language you want is shown 3 Press OK Picture freeze e Press PAUSE on the remote control to freeze the display e Press PAUSE again to resume normal viewing Favourites list You can create a favourites list of channels and then select a channel from that list This makes it easier to choose and switch between channels if there are many channels available in your area 17 You display your favourites lists by pressing FAV on the remote control You then press w or 4 to step through each favourite Stop pressing when you reach the favourite you want Adding channels or stations to your favourites list Follow this procedure to add channels or stations to your favourites list or fo remove them 1 Press MENU on the remote control The Main Menu appears 2 If Channel Mana
27. ress MENU on the remote control The Main Menu appears 2 If User Setting is not highlighted on the main menu press lt or until if is and then press OK The User Setting menu appears If OSD Setting is not highlighted on the menu press Y Or A until it is and then press OK The OSD Settings menu appears 3 If AV Setting is not highlighted on the menu press w or a until it is and then press OK The AV Setting menu appears With this menu you can control the following settings e Sceen ratio 4 3 or 16 9 e S PDIF output PCM AC3 RAW e Aspect mode Full screen Letterbox or Pan amp Scan e HD Video Mode 576i 576p 7200 and 1080 28 Note that some of these settings are restricted by the type of connection you have made between the SRT 5429 and your TV For example e If you have connected the SRT 5429 to a Dolby Digital decoder amplifier the S PDIF output setting must be set to AC3 4 Select an option you want to change If necessary press w or a until the option is highlighted 5 With the option you want to change highlighted press or to step through the allowable values shown in the panel at the right of the screen Stop when the value you want Is displayed 6 If there is another option you want to change repeat this procedure from step 4 7 When you have finished press EXIT to save and return previous menu Parental control The SRT 5429 is shipped with a default personal identificati
28. ss MENU on the remote control The Main Menu appears 2 If Channel Manager is not highlighted on the main menu press or until it is and then press OK The Channel Manager menu appears 3 If you want to organise a channel make sure Edit TV Channels is highlighted or if you want to delete a station make sure Edit Radio Channels is highlighted With the option you want highlighted press OK A list of channels or stations appears Program Edit 4 LOCK Press W Or A until the channel or station you want to lock is highlighted Press SUB button the red button again the program will be un locked The default password is 000000 20 5 MOVE Press W Or A until the channel or station you want to lock is highlighted Press AUDIO button the green button the Move logo will appear on the sreen Press W Or A to move to the place what you want 6 DELETE Press w or 4 until the channel or station you want to delete is highlighted Press the INFO button on the remote contron the following will appear Do you want to delete this Pessing OK will delete Pressing EXIT will cancel If you want to delete another channel or station repeat from step 4 7 SORT Press TIMER button the blue button to sort channels The sort icon will appear at the top of the channels list 8 FAV Press w or until the channel or station you want to select is highlighted Press the FAV button on the remote control to mark the highlighted channel or
29. ure the power switch Is on Make sure that the correct cable is connected between the TV and the receiver and that the antenna is connected Check that the correct video or AV input has been selected on your TV If you have a Composite or S Video connection to your TV video definition must be set to 576i Press EXIT and then FORMAT on the remote control until you see a picture Check that the antenna cable is securely plugged in and that the signal is adequate Check that all antenna cabling is quad shielded Press the MUTE button on the receiver and on the TV Select the desired TV volume level using the TV remote control Insert batteries ensure the batteries are inserted as per the diagram inside battery cover Batteries are flat Change the batteries in the remote control Aim the remote control directly at the receiver Files are of wrong format Check that the format is MP3 Move the files out of folders or directories Support For Technical Assistance For General Enquiries Product Return Tracking Please call our Technical Support Help Line on 1800 820 030 Please email us at tech strong com au If you need to send your receiver to Strong for repair or evaluation please keep a record of the unit s serial number This will ensure ease of tracking and identification on your behalf 36 Specifications Input Connector Antenna IEC 169 2 Female Output Connector RF Loop Out IEC 1
30. wn buttons on the front panel of the SRT 5429 e By EPG Press EPG on the remote control select the channel from the electronic program guide EPG and press EPG again The EPG is explained on page 23 e Previous channel Press the BACK button to return to the previous channel or station Adjusting the volume While you are watching TV or listening to the radio press or on the remote control to decrease or increase the volume respectively Turning the sound off muting To turn off the sound altogether press the MUTE button on the remote control button 18 in the diagram on page 8 The mute icon is displayed on the screen Press the MUTE button again to restore the sound Getting channel Information e Press INFO on the remote control to display the information banner SUS Lock Stereg 4 11 15 73 45 Vodafone Live AT The Chape 3 45 00 45 The Late Show With David Letterman Information about the current and the next program is provided The headings along the top of the banner are SUB Subtitles and LOCK STEREO A heading will be highlighted if the corresponding option applies for example if the broadcast is in high definition if subtitles are available if stereo are available and so on The information banner will stay displayed for a few seconds To hide it sooner press EXIT on the remote control TV Radio switching Press TV RADIO on the remote control to switch between TV channels and radio stations o
Download Pdf Manuals
Related Search