Instruction Manual for "Extension Ring 30L"（1.14MB
Contents
1. by salt to the product Salty residue may be left on the product where it will crystallize as it evaporates Crystallized salt is hard to dissolve and difficult to be removed once formed and it will result in water leakage After rinsing dry the product well with a soft dry cloth then let the product dry in the shade out of direct sunlight Do not dry the product by heating using a hair dryer for example Preparation for Installation Maintaining the O ring Do not store the product in wet or high humidity place to avoid mold rust corrosion or malfunction Do not store the product wet Thoroughly dry the surface using a soft non scratching cloth to prevent spot marks SEA amp SEA SUNPAK Co Ltd will not be responsible for the replacement or compensation for cameras lenses or those accessories damaged due to your invalid operation SEA amp SEA SUNPAK Co Ltd assumes no liability for compensation of loss of captured image or expenses caused by loss of images even if you are unable to shoot due to a product defect or malfunction SEA amp SEA SUNPAK Co Ltd assumes no liability for errors or discrepancies in this manual Heating can deform and damage the product If you will not use the product for an extended period of time store it away from high temperatures high humidity direct sunlight or extreme cold Do not store the product with naphthalene or camphor mothballs or in locations such as a labo2. S AcSEA 30123 30124 30125 1446 Z 01A Thank you for purchasing SEA amp SEA products Please read this instruction manual carefully prior to using your underwater housing Only with a thorough understanding of this manual s content will you be able to use the housing correctly After reading the manual please be sure to keep it in a place where you can easily come back to it at any time Safety Precautions Failure to heed the precautions listed below could result in rerious consequences To prevent injury or damage to yourself and or others please observe the precautions as they contain highly important information related to personal and product safety N CAUTION Unauthorized disassembling and or modification could Extension Ring 20L 30L 40L Instruction Manual Situations that could result in AN CAUTION property damage or personal injury summer Identification of Parts Port Lock Lever White Bayonet Mount Bayonet Mount Position z K guide mark lt Extension Ring 20L gt Attaching and Detaching The intermediate ring fits sungly with the port to provide a watertight seal This sung fit may make it difficult to remove the ring from the port when detached from the housing To remove the ring keep the ring and port installed on the housing with the port lock engaged in Port Lock Lever White lt Extension Ring 30L gt Port Lock Lever White Bayon
3. et Mount Position guide mark Position a lt guide mark lt Extension Ring 40L gt in the counter clockwise direction Then disengage the port lock and remove the intermediate ring from the housing Please also note that if the port and intermediate ring are left together for long periods of time they may be difficult to separate Always store the intermediate result in malfunction or flooding and void product warranty Take the product to a SEA amp SEA authorized service center for repair or inspection Do not open the product in a wet or sandy environment Protect the interior from moisture and debris in order to prevent malfunction or flooding Avoid strong shocks impacts or excess stress to prevent malfunction damage or breakdown Make sure that the product has been securely mounted to other products in order to prevent injury fall or missing Do not carry the camera or housing by holding the accessories such as arm cable strobe etc Heavy components may fall and cause damage or injury Do not leave the product in places with hot temperatures such as inside of a car or in a car trunk in Maintenance and Storage Never use chemicals cosmetics any petroleum solvents such as paint thinner or neutral detergent on the product They may deform and damage the product e After each use in salt water make sure it s watertight then soak it sufficiently in fresh water Insufficient soaking causes damage
4. ratory where chemicals are used This environment can cause mold rust corrosion or malfunction After using the product maintain the O rings before storing Examine the O rings before and after each dive We recommend early exchange of the O rings at least once a year Every two years we recommend a complete overhaul of O rings regardless of the frequency in use for the best performance of the product This product is kept watertight by the O ring To keep the O ring functioning properly please observe the following before setting up Make sure to remove the O ring when maintaining For detailed O ring maintenance methods please see the O ring maintenance manual The O ring is a consumable item and it generally lasts for one year It is advisable to replace it early Specifications Construction Weight 20L Approx 154g 5 430z Corrosion resistant aluminium alloy Depth rating 30L Approx 194g 6 840z Dimensions DIAxXH 20L Approx 0129x35 5mm 5 2x1 79inches 30L Approx 0129x45 5mm 5 2x1 79inches 40L Approx 0129x55 5mm 5 2x1 79inches 100m 330ft Accessories Instruction manual this manual 40L Approx 234g 8 250z The specifications and appearance are subject to change without notice the intermediate ring First remove the port from the intermediate ring Attaching the Port 1 Align the LOCK INDEX on the Extension Ring and the OPEN mark on the port Press the port onto the Extension Ring and t
5. urn the port clockwise till it stops at the LOCK mark N CAUTION When attaching the port to the housing always refer to the instruction manual provided Before attaching the port make sure there are no specks of dust scratches or deformities on the O ring and the O ring contact surfaces When fitting or removing a port from the extension ring ensure the Port Lock Lever is in OPEN position This extension ring may be broken or damaged if an ML port is forcibly attached or removed when they are locked ring and the port separately LOCK mark OPEN mark Port 2 Pull the Port Lock Lever then turn it counter clockwise into the LOCK position as shown OPEN position LOCK position i te ye ed Turn to LOCK position __ Detaching the Port 1 Please refer to the instruction manual of the housing Z CAUTION When fitting or removing a port from the extension ring ensure the Port Lock Lever is in OPEN position This extension ring may be broken or damaged if an ML port is forcibly attached or removed when they are locked SEAcSEA SEA amp SEA SUNPAK Co Ltd 1 4 6 Kitasenzoku Ohta ku Tokyo Japan 145 0062 TEL 81 3 5701 5533 World Customer Service Center TEL 81 48 255 8512 Current as of Mar 2015 http www seaandsea co jp
Download Pdf Manuals
Related Search