Home

Juno 3B and 3D Handhelds

Contents

1. The PAN service is not available on the Juno 3D handheld model which has an integrated modem Making a Bluetooth PAN connection with a Bluetooth enabled cellular phone is similar to making a Bluetooth Dialup Networking DUN connection see Connecting to a Bluetooth enabled phone for Internet access page 60 in that it enables the handheld to access the Internet If PAN connections are supported by your cellular phone the advantages of using a PAN connection rather than a DUN connection are e PAN connections are easier to set up e PAN connections automatically attempt to reconnect when the handheld is resumed from being suspended or shut down To access the Internet using a Bluetooth PAN connection to a Bluetooth enabled cellular phone you must Juno Series Handhelds User Guide 63 64 l 2 Pair the Juno series handheld with a cellular phone that supports the Bluetooth PAN profile Enable the PAN connection on the handheld Step 1 Pairing with the cellular phone l Make sure that the handheld and the Bluetooth device you want to pair with are within five meters of each other and that the Bluetooth radio in each device is turned on On the Juno series handheld tap W Settings Bluetooth In the Devices tab tap Add new device The handheld searches for other Bluetooth devices and displays them in the list If the device you are trying to connect is not displayed in the list ensure that the device is on
2. Step 2 Connecting to the Internet using the dialup network l On the handheld go to the Connections screen if it is not already open tap Settings Connections Connections Below My ISP tap Manage existing connections Tap and hold the connection you want to use and then select Connect Unless the phone provider confirmed that you must enter user name password and domain settings to access the Internet tap OK without entering any information in this screen Otherwise enter the required information and then tap OK Ifthe phone prompts for confirmation to connect to the Internet accept the connection The phone dials the configured GPRS access number and then connects to the Internet A Connectivity notification appears on the handheld as the connection is being made After the connection is made you are returned to the My JSP screen To confirm that the Juno series handheld is connected to the phone or to check the status of the connection at any time tap the title bar and then tap the Connectivity icon on the pull down list The notification shows the name of the current connection and the time elapsed since the connection was made To hide the notification tap Hide Note If you have an active Wi Fi connection the connectivity icon appears as instead 6 Tap OK to close the My ISP screen 7 Tap OK to close the Connections Tasks screen 8 Tap to close the Connections screen 62 Juno Series Handhel
3. 5 if you violate the terms of this EULA Any replacement Software will be warranted for the remainder of the original warranty period or thirty 30 days whichever is longer 2 4 NO OTHER WARRANTIES TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW TRIMBLE AND ITS SUPPLIERS DISCLAIM ALL OTHER WARRANTIES TERMS AND CONDITIONS EITHER EXPRESS OR IMPLIED BY STATUTE COMMON LAW OR OTHERWISE INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES TERMS AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE TITLE AND NONINFRINGEMENT WITH REGARD TO THE SOFTWARE ITS SATISFACTORY QUALITY AND THE PROVISION OF OR FAILURE TO PROVIDE SUPPORT SERVICES TO THE EXTENT ALLOWED BY APPLICABLE LAW IMPLIED WARRANTIES TERMS AND CONDITIONS ON THE SOFTWARE ARE LIMITED TO NINETY 90 DAYS YOU MAY HAVE OTHER LEGAL RIGHTS WHICH VARY FROM STATE JURISDICTION TO STATE JURISDICTION NO WARRANTIES FOR THE MICROSOFT SOFTWARE THE MICROSOFT SOFTWARE is provided AS IS and with all faults AND TRIMBLE PROVIDES NO WARRANTY WITH RESPECT THERETO THE ENTIRE RISK AS TO SATISFACTORY QUALITY PERFORMANCE ACCURACY AND EFFORT INCLUDING LACK OF NEGLIGENCE FOR THE MICROSOFT SOFTWARE IS WITH YOU ALSO THERE IS NO WARRANTY AGAINST INTERFERENCE WITH YOUR ENJOYMENT OF THE MICROSOFT SOFTWARE OR AGAINST INFRINGEMENT 2 5 PLEASE NOTE THE FOREGOING TRIMBLE LIMITED WARRANTY PROVISIONS MAY NOT APPLY TO SOFTWARE PRODUCT LICENSES PURCHASED IN THOSE JURISDICTIONS S
4. Note Ifthe connection is not made automatically check that the connection is enabled in the Windows Mobile Device Center software and on the handheld For more information see Troubleshooting page 83 4 Doone of the following To synchronize files and data between the handheld and a computer click Set up your device and then follow the instructions on screen To transfer data between the handheld and the computer without synchronizing the devices click Connect without setting up your device 5 To transfer files between the computer and the handheld click File Management A Windows Explorer type window appears displaying files stored on the handheld Copy and paste files to other locations on the computer or from the computer to the handheld 6 To install software onto the handheld see Installing software onto the handheld page 46 7 To uninstall software from the handheld click Programs and Services and then click Add Remove Programs Tip If the Add Remove Programs option does not appear below Programs and Services click More The Add Remove Programs option appears For more information refer to the Windows Mobile Device Center Help Tip If the GPS Pathfinder Office software is installed on the office computer you can configure the Connection Manager utility in the GPS Pathfinder Office software to automatically detect when you connect a Juno series handheld to the computer This enables you to automat
5. a Adobe Reader LE Read PDF documents Alarms Set alarms ae Calculator Perform basic arithmetic functions Calendar Keep track of appointments and arrange meetings T Contacts Keep track of your friends and colleagues File Explorer View and manage files Internet Explorer Browse the World Wide Web A WRI EE Notes Create handwritten typed or recorded notes e Pictures and Videos Take view and edit pictures or record and launch video clips Search Device Search for a file or item stored on the handheld Tasks Keep track of your tasks Windows Live Access Windows Live services including email instant messenger and Internet search Windows Media Play Windows Media or MP3 audio and video files Juno Series Handhelds User Guide 29 Program Function M E mail Write send and receive email messages On the Juno 3D handheld you can also access text messaging functions Office Mobile 2010 Provides access to these Office Mobile applications Excel Mobile Juno 3D handheld only 2010 PowerPoint Mobile 2010 OneNote Mobile 2010 SharePoint WorkSpace Mobile 2010 and Word Mobile Text Send receive and organize text messages Juno 3D handheld only Phone Access the phone functions Juno 3D handheld only g Flashlight Use the camera LED flash as a flashlight Juno 3D handheld only Interacting with the handheld To interact with the handheld use the stylus or your finger to tap items on the touc
6. aGPS and emergency calls Juno 3D handheld only When you make an emergency call your phone can use assisted Global Positioning System aGPS satellite signals to tell the emergency response center your approximate location The aGPS functionality may be limited so Always tell the emergency response center your best knowledge of your location Remain on the phone for as long as the emergency response center instructs you aGPS might not work for emergency calls if your local emergency response center does not process aGPS location information For details contact your local authorities aGPS performance For best results Go outside and away from underground locations covered vehicles structures with metal or concrete roofs tall buildings and tree cover Indoor performance might improve if you move closer to unobstructed windows Move away from electronic devices that might interfere with or block aGPS satellite signals for example radios and entertainment equipment If your phone cannot find strong aGPS satellite signals the location of the nearest cell tower in contact with your phone is automatically provided to the emergency response center aGPS technolo This mobile device incorporates aGPS technology in order to comply with emergency caller location requirements aGPS technology also can be used in other applications to track and monitor a user s location for example to provide location specific d
7. gS Pictures amp Videos Alama E Connectivity icons Tap either icon to access the Wireless Manager T g gt X o 10 58 Pull down list Tap anywhere on the title bar to open the title bar pull down list where you can access connectivity controls the Wireless Manager battery information time and date settings and volume A E mail Juno Series Handhelds User Guide 27 Status indicators Status indicators that appear in the title bar at the top of the screen are as follows Battery status indicators icon Description Battery has full charge 81 100 Battery has high charge 61 80 Battery has medium charge 41 60 Battery has low charge 16 40 Battery has very low charge 15 or less EN Coed Cid N CEN E Battery charging using external power The battery status icon on the title bar of the Home screen or the Start screen shows the status of the battery charge Tap the title bar and then on the pull down list tap the bia icon to access the Power control dialog See Checking the level of battery power page 19 Network and modem status indicators Icon Connected to ActiveSync or Windows Mobile Device Center WMDC on a computer Connected to a Bluetooth enabled phone Disconnected from ActiveSync or WMDC ei Disconnected from a Bluetooth enabled phone Wi Fi radio is on Wi Fi is detected Connected to a wireless network Maximum cellular modem signal strength No cellular mode
8. Keep the shipping and packaging material for the carriers inspection 12 Juno Series Handhelds User Guide Accessories The following optional accessories are available External patch antenna Screen protectors 2 pack anti glare or ultra clear e External battery charger Vehicle power adaptor e Replacement stylus 2 pack Carry case with belt clip e Replacement International AC adaptor e Replacement battery Vehicle mount e Replacement wrist strap Pole mount For more information go to www trimble com mappingGIS juno3B aspx www trimble com mappingGIS juno3D aspx Use and care of the handheld When using the handheld Protect the touch screen by using your finger or the stylus provided and avoid using excessive pressure and sharp or abrasive objects To protect the touch screen from pressure and abrasive objects Trimble recommends that you apply a screen protector Keep the outer surface free of dirt and dust Ensure that protective covers are appropriately fitted to the external antenna port USB and power connectors so that they are kept free from dirt dust fluid ingress and electrostatic discharge Protect the handheld from extreme temperatures For example do not leave the handheld on the dashboard of a vehicle The handheld is rated IP54 but is not waterproof Do not immerse the handheld in water and be careful not to drop the handheld or subject it to any strong impact To clean the handheld wi
9. Messages iB Deleted Items 1 b Click the Inbox drop down arrow amp eA Drafts c Click the required folder to view messages in Inbox that folder 4 Outbox e p Sent Items 42 Juno Series Handhelds User Guide Connecting to an office computer Connect the Juno series handheld to an office computer to transfer information settings and files from one device to the other or to install software onto the handheld You can connect the handheld to a computer using the USB cable or a Bluetooth wireless link A N CAUTION When using the USB port at the bottom of the handheld make sure that it is kept dry Water damage may cause the USB connection to fail and the handheld will not connect to the office computer To protect your data Trimble recommends that you regularly copy important data to an office computer Connection management software To install software onto a Windows embedded handheld or to copy files between the handheld and a computer you must connect the device to an office computer If the computer is running e the Windows 7 or Windows Vista operating system use the Windows Mobile Device Center to manage the connection e the Windows XP or 2000 operating system use ActiveSync technology to manage the connection Note You must install the Windows Mobile Device Center or ActiveSync technology onto the computer before you connect the handheld This connection management software also
10. Settings Connections Wireless Manager If the Phone is Off tap Phone to turn it on Tap 3 Settings Connections Connections Under Tasks tap Add a new modem connection Enter a name for the connection for example My Connection In the Select a modem field select Cellular Line and then tap Next Enter the APN provided by your cellular provider check with your provider first for correct settings some providers have multiple APN settings Tap Next Enter a username password and domain if required check with your provider these are often not required If not required leave these fields empty Tap Finished Step 2 Connect to the cellular network l Tap Settings Connections Wireless Manager If the Phone is Off tap Phone to turn it on Close the Wireless Manager Tap amp Settings Connections Connections Under Tasks tap Manage existing connections The configured connections are listed Tap and hold the connection that you want to use Tap Connect from the pop up menu The task bar shows the connecting icon for example H When the connection is open established the task bar shows the connected icon for example H The icons shown depend on the network see Network and modem status indicators page 28 for full details Once connected open an application for example Internet Explorer to test the connection Some applications automatically launch the connection when y
11. To change the time before the handheld enters Suspend mmm et Y CGT 1253 mode y lt Advanced gt Battery 1 Tap the title bar of the Home or the Start screen and then tap fj The Power control appears aie nate displaying the Battery tab icin eae E Turn off screen if device not used for 2 Tap the Advanced tab 3 From the On battery power option select the Turn off screen if device not used for check box and then select the idle time from the drop down list 4 Tap OK Resetting the handheld If the screen on the handheld is blank the handheld has turned off Press the Power button to turn on the handheld Ifthe handheld stops responding to the stylus or if it does not respond when you press any of the keypad buttons you may need to reset it First try a soft reset If the handheld does not respond perform a hard reset You can also reset the handheld to its factory default settings Performing a soft reset A soft reset is similar to restarting a computer A soft reset saves data and closes all open applications and then restarts the handheld All data and settings are retained after a soft reset To perform a soft reset use the tip of the stylus to lightly press the Reset button Alternatively press the Power button until the Power menu appears and then tap Reset Performing a hard reset A hard reset retains settings and data that you have previously saved on the handheld However any unsaved data
12. and then tap Connect or dismiss the message 6 Start using the program you want to use for example Windows Explorer Mobile or Internet Explorer To check the connection status at any time tap the title bar and then on the pull down list tap the required connection icon The Bluetooth PAN connection appears as Network Card To end the connection at any time tap W Settings Bluetooth In the PAN tab clear the Enable PAN connection check box Connecting to a Bluetooth enabled serial device Use Bluetooth wireless technology to receive data from a Bluetooth enabled serial device such as a laser rangefinder To connect to a Bluetooth enabled serial device you must 1 Connect to the Bluetooth enabled serial device 2 Configure the COM port on the handheld to use for the connection 3 Ifnecessary configure the GNSS field software to use data received from the serial device Step 1 Connecting to the Bluetooth enabled serial device Connect the handheld to the Bluetooth enabled device selecting the Serial Port service if it is not already selected see Connecting to a Bluetooth enabled device page 54 Step 2 Configuring the COM port to use on the handheld 1 Onthe Juno series handheld tap amp Settings Bluetooth 2 Tap the COM Ports tab 3 Tap New Outgoing Port Bluetooth gt E ao 9 52 4 Select the device you want to set up the Mode COMPorts gt PAN connection to and then tap Next cl ag ey ig tr
13. and within range and then tap Refresh to search for devices again Tap the name of the device you want to pair with and then tap Next on the right softkey In the Passcode field enter a passcode of your choice between 1 and 16 characters Note Trimble recommends that you enter only numbers as some devices do not support passcodes that include letters 6 Ja Tap Next on the right softkey When prompted enter the same passcode on the other device On the handheld the Partnership Settings screen appears 8 2 10 If required change the name of the device in the Display Name field Select the Network Access Point check box The boxes for other services offered by the phone can be unchecked Tap Finish on the right softkey Step 2 Enabling the PAN connection l In the PAN tab of the Bluetooth application on the handheld select the cellular phone you just connected to from the drop down list and then select the Enable PAN connection check box The status field in the PAN tab shows the progress of the connection Wait until the Status field shows Connected Check the cellular phone and if prompted allow the connection The W or d icon in the title bar changes to Fi Tap OK to close the Bluetooth application Tap to close the Settings screen Juno Series Handhelds User Guide 5 Ifthe Establishing Connection popup message appears on the handheld select The Internet or work via a VPN or Work
14. enter the URLs here so you can connect bo those sites URL exceptions Add new URL Juno Series Handhelds User Guide 71 72 Using the GNSS receiver The Juno series handheld includes an integrated GNSS receiver that enables you to collect GNSS data for incorporating into a GIS or for managing assets The integrated receiver tracks only Global Positioning System GPS satellites GPS is a satellite based positioning system consisting of a constellation of operational NAVSTAR satellites that orbit the earth every 12 hours This system provides worldwide all weather 24 hour time and position information Note To receive signals from GPS satellites the handheld must have a clear view of the sky GNSS positions may not always be available particularly in or near buildings in vehicles or under tree canopy Supported GNSS field software Depending on the GNSS field software you have installed the default GNSS field software will be GPS Controller TerraSync or the Trimble GPScorrect extension for Esri ArcPad software The GPS Controller software enables you to check the current GNSS status or to configure the integrated GNSS receiver and to configure GNSS output settings for third party GNSS applications To install the GPS Controller software go to www trimble com support shtml Click GPS Controller and then click Downloads Click the link for the version you want to install and then follow the instructions in the
15. is for GPS antennas only WARNING The presence of any dust or moisture in the external antenna port may cause the external antenna to not work To prevent dust or moisture entering the external antenna slot take care when using the handheld with an external antenna in wet or dusty conditions Juno Series Handhelds User Guide About the Juno series handhelds The Juno series handhelds includes the Juno 3B and 3D handhelds These rugged handhelds are rated IP54 and combine a high sensitivity GNSS receiver with the Windows Embedded Handheld 6 5 Professional operating system The Juno series handhelds have built in Bluetooth wireless technology for cable free connection to other devices Wi Fi connectivity for connections to networks and an integrated 5MP camera with autofocus and flash The Juno 3D handheld also has an integrated cellular modem for downloading and transmitting data with support for voice calls and text messaging The integrated GNSS receiver provides accurate positioning information within 3 meters when using postprocessed or 5 meters with real time differential corrections For more information see Using the GNSS receiver page 72 About this user guide The Juno Series Handhelds User Guide describes how to set up and use the Juno series handheld The information in this guide supplements the information in the Juno Series Quick Start Guide which you received with the handheld This guide describes
16. lock clockwise to secure the back cover To remove the battery 4 Remove the back cover of the handheld and then pull the right side of the battery towards you A N CAUTION The handheld is not sealed from water and dust when the battery is removed Trimble recommends only removing the battery for short periods of time and only removing the battery indoors or from inside the protection of a vehicle Charging the battery Charge the battery in the handheld see page 17 To charge the battery do one of the following e Connect the AC power adaptor to the Power socket on the handheld and then connect the adaptor to mains power An international adaptor kit is provided with the handheld e Connect the optional vehicle power adaptor to the Power socket on the handheld and then connect the adaptor to the vehicle power source e Connect the mini USB cable to the handheld and then connect the cable to your computer Note USB may provide less power than mains or vehicle power It may take longer to charge the handheld using the mini USB cable and it will also take longer to turn on or operate the handheld if you are charging it from a completely flat battery When the handheld is connected to a power source the battery icon in the Home screen changes to Fully charging the battery from empty takes approximately four hours You can use the handheld while it is charging 18 Juno Series Handhelds User Guide The Power LED around
17. of text on the screen To open the Screen control e Tap amp Settings System Screen To change the screen settings Sereen P oF E T 6 06 Tap the General tab Text Size 4 General gt ClearType Orientation 2 To change the orientation of the screen select an portrait option in the Orientation group Pisce Langecape mgnt han 3 To start the alignment sequence for the touch _ Landscape left handed screen tap Align Screen Align Sereen Align the sorgen if it is mot responding 4 Tap OK accurately to stylus taps Note To align the screen at any time press and hold the Power buiton for 1 second until the Power menu appears and then tap l Using ClearType font smoothing can make text easier to read on the screen Note ClearType is already on by default on the Juno series handheld 36 Juno Series Handhelds User Guide To enable ClearType 1 Tap the ClearType tab and then select the Enable ClearType check box 2 Tap OK To change the size of text on screen PER o KY E a 6 06 1 Tap the Text Size tab ClearType Text Size General Adjust the text size to see more content or 2 Tap and drag the slider control to the left to make inrsss the readability in many programs Smallest Largest text smaller or to the right to make text larger The example text below the slider shows how the _ Exampie text will appear on screen Ill get back to you 3
18. recording Select All To add a recording to a note create or open a note and then tap the Record button e to begin recording 4 When you finish recording tap the Stop button Ol If you are creating a stand alone recording an icon appears in the note list If you are recording in an open note an icon appears in the note Tap OK to return to the note list To play a recording tap the recording in the note list or open the note and then tap the icon in the note Personalizing the handheld Use the controls in the Settings area to customize the handheld The following examples describe the available controls Buttons Use the Buttons control under Personal settings to assign the action you want to be performed when you press the left or right application key By default these keys perform the same action as the left and right tiles in the tile bar Alternatively program these keys to perform a selected action Application buttons can be programmed to perform one of the following types of actions e Runa selected application for example Messaging or Calendar e Act as a software button for example an OK Close button or a scroll button Juno Series Handhelds User Guide e View a selected screen or part of a screen for example return to the Home screen or launch the Context menu or Input panel To open the Buttons control e Tap Settings Personal Buttons To specify an action for the butto
19. right softkey to zoom in As you zoom in each segment of the bar turns yellow to indicate the level of zoom The level of total zoom available depends on the resolution that you use the greater the current camera resolution the less you will be able to zoom in Resolution Zoom capability VGA 1 2x 1MP 1 2x 3MP 1 1 2x 5 MIP Using the camera in Video mode To start recording a video do one of the following e tap the Record icon o e press the Camera button To pause recording tap the pause icon To resume recording tap the pause icon again To stop recording a video do one of the following e tap the Stop icon E e press the Camera button tap the Delete icon Juno Series Handhelds User Guide 81 Note Only use the Delete icon if you are certain that you want to discard the recording Managing images To view and manage images do one of the following tap Pictures amp Videos tap the Pictures amp Videos icon in the top left of the camera application screen The Pictures amp Videos screen appears Pictures amp Videos gt XY 2 10 47 E My Pictures Date Camera potas videodoo30 9 videoOoo29 videoOOO0 7 C Menu S Sis hy inet i r en 82 Juno Series Handhelds User Guide Troubleshooting Use this section to identify and solve common problems that may occur when using the Juno series handheld Please read this section before you contac
20. select e Date stamp on the image and in the file EXIF header e Date stamp in the file EXIF header e Date stamp on the image e No date stamp Show GPS stamp decimal degrees Tap to select e GPS stamp on the image and in the file EXIF header e GPS stamp in the file EXIF header e GPS stamp on the image e No GPS stamp Flash e On Off Resolution e VGA video graphics array 640 x 480 e QVGA quarter video graphics array 320 x 240 Mute e On e Off Using the camera in Camera mode Camera mode Video mode Camera mode only Camera mode only Camera mode only Camera mode only Video mode only Video mode only To take a picture press the Camera button As the camera has autofocus there is a slight delay between pressing the Camera button and the photo being taken You know that you have successfully taken the picture when you hear the click 80 Juno Series Handhelds User Guide Half press the Camera button to focus and then fully press the Camera button to take the photo When focussing the focus square on the preview screen see below will change color e White attempting to focus e Red cannot focus Green focus locked Using the Zoom function The Zoom function can only be used in Camera mode To adjust the current zoom level do one of the following e tap to zoom out or to zoom in e tap the desired zoom level on the bar e press the left softkey to zoom out or the
21. tap any of the radio icons and then tap Wireless Manager e Tap Settings Connections Wireless Manager Turn on the Wi Fi radio and or Bluetooth radio to be able to connect to other devices or networks Turn on the Juno 3D handhelds phone functionality to be able to send and receive text messages and make and receive voice calls Turn off the Wi Fi radio Bluetooth radio and or phone Juno 3D handheld only to prevent the handheld from sending or receiving wireless signals Tip To conserve power turn off the radios when not in use Juno Series Handhelds User Guide To turn on or turn off the radios using the Wireless Manager 1 Open the Wireless Manager see above Wireless Manager 2 Do one of the following Note The Phone option applies only to the Juno 3D handheld Tap All at the top of the screen to turn on the radios or to turn off all the radios if they are already on Tap Wi Fi Bluetooth or Phone to turn on the radio that you want to use or to turn off the radio if it is already on The status fields below the Wi Fi button the Bluetooth button and the Phone button change from Offwhen the radios are turned on and show the current state of the radio The Wi Fi status field shows Connecting or Available the Bluetooth status field shows On or Visible and the Phone status field shows On or the name of the cellular network that you are connected to 3 Tap g to exit the Wireless Manager After
22. the Power button on the handheld indicates the battery power or charging status as shown below Power source LED state Handheld battery state Battery power Off Off in Suspend mode or turned off Off On and battery level is good Flashing red On and battery is low less than 10 External power Flashing green Charging Solid green Charging is complete Avoid keeping the battery at full charge at high temperatures For more information see Storage page 13 Note The life of the battery can be significantly shortened if power is constantly supplied to the handheld To avoid this issue connect the handheld to an external power source only when the battery requries charging Once fully charged disconnect the external power source and allow the battery to discharge through normal use Checking the level of battery power To check the level of battery power remaining at any time while the device is running tap the title bar of the Home screen and then tap ij in the pull down list The Power control appears displaying the Battery tab Power E 1051 Advanced lt Battery gt Advanced Main battery Lilon When the handheld battery is recharging from an external power source the battery icon in the Home Recharging state Charging screen changes to You can still tap the icon to view the level of battery power Low battery indicators When the battery level reaches e 15 the battery icon in the title bar of the H
23. the keypad to dial a phone number and then tap Talk 1 Voicemail Tap g to hide the keypad and select an E Customer Service option from the list of previously dialled a ay numbers a ghit 5 6 Speed Dial 9 ve Il History a fe Tak unless you use the Unlock left softkey or Call End right softkey To answer a phone call press the Start call button or the left softkey Note When you answer a voice call the screen is blank To end a phone call press the End call button or the right softkey Phone settings Note You must have a SIM card in the handheld to access and change the phone settings You can change the ring type ring tone and keypad sound If required you can also set a PIN for the SIM card or change the type of network or the name of the network you want to connect to 1 To access Phone Settings do one of the following Tap the modem status icon on the title bar of the Home screen and then tap Settings Tap 4 Settings Personal Phone 2 Do any of the following Select the Sounds tab to set the required ring type ring tone and keypad sound Select the Security tab to set a PIN change the PIN or set the handheld to require a PIN to be entered every time the phone is used For more information on setting a PIN see Setting a PIN on the Juno 3D handheld page 49 Select the GSM UMTS tab to select a particular type of network to connect to By default G
24. to connect Allow USB connections This computer is connected to Automatic Allow automatic device authentication Allow data connections on device when connected to PC Cancel Select the Allow connections to one of the following check box From the list select Bluetooth and then click OK e the Windows XP operating system a d From the Bluetooth user interface on the office computer identify the virtual COM port of the of the host Bluetooth Serial Port or Local Service and ensure that this is enabled In this example the virtual COM port is COMB Start the ActiveSync technology on the office computer Select File Connection Settings The Connection Settings dialog appears Connection Settings gt Waiting for device to connect Connect iw Show status icon in taskbar i Allow LSB connections W Allow connections to one of the Following COME af This computer is connected to Automatic Y lf Open Activesync when my device connects Allow wireless connection on device when connected to the desktop we ceel Select the Allow connections to one of the following check box Juno Series Handhelds User Guide 67 e From the list select the COM port that you selected in Step a and then click OK Note Before you try to form a Bluetooth connection from the Juno series handheld to the office computer you must correctly configure the Bluetooth host serial port
25. you should understand that speech recognition is an inherently statistical process and that recognition errors are inherent in the process Neither Trimble Microsoft nor any of their suppliers shall be liable for any damages arising out of errors in the speech recognition process 10 You may not publish the Software for others to copy 11 You may not use the Software for commercial software hosting services 1 13 Notice Regarding the MPEG 4 Visual Standard The Software may include MPEG 4 visual decoding technology This technology is a format for data compression of video information MPEG LA L L C requires this notice USE OF THIS PRODUCT IN ANY MANNER THAT COMPLIES WITH THE MPEG 4 VISUAL STANDARD IS PROHIBITED EXCEPT FOR USE DIRECTLY RELATED TO A DATA OR INFORMATION i GENERATED BY AND OBTAINED WITHOUT CHARGE FROM A CONSUMER NOT THEREBY ENGAGED IN A BUSINESS ENTERPRISE AND ii FOR PERSONAL USE ONLY AND B OTHER USES SPECIFICALLY AND SEPARATELY LICENSED BY MPEG LA L L C Ifyou have questions about the MPEG 4 visual standard please contact MPEG LA L L C 250 Steele Street Suite 300 Denver CO 80206 www mpegla com 1 14 If the Device Software is provided by Trimble separate from the Device on media such as a ROM chip CD ROM disk s or via web download or other means and is labeled For Upgrade Purposes Only you may install one 1 copy of such Device Software onto the Device as a replacement copy for the existing Dev
26. you turn on the Wi Fi radio the Wi Fi icon f appears in the title bar to indicate that the Wi Fi radio is enabled A second icon appears if a Wi Fi network is detected and a Notification for the detected network may appear in the left softkey Configuring phone settings Juno 3D handheld only You can help to keep data secure by configuring your SIM card with a PIN personal identification number You will need to enter the PIN each time you want to use the phone Most SIM cards are preset with a PIN that is assigned by your wireless service provider You will need to enter this PIN first Setting a PIN on the Juno 3D handheld To set a PIN the phone must already be turned on 1 Open the Wireless Manager see above 2 Tap Menu Phone Settings Security Juno Series Handhelds User Guide 49 3 To configure the phone to always require a PIN Phone G gy d 10 21 select Require PIN when phone is used sounds Security gt Services 4 Enter the preset PIN assigned by your wireless service provider 5 Tap OK C Require PIN when phone is used To change a PIN Q gy d 10 25 rt vodafone NZ 1 Tap Cha nge PIN Enter old PIN 3 attempts remaining 2 Enter the current PIN and then tap Enter 3 Enter anew PIN and then tap Enter Turning on and turning off the Bluetooth radio from within the Bluetooth application l Tap Settings Bluetooth Bluetooth a m 5 53 2 Tap the Mode tab De
27. AND MATERIALS ARE PROVIDED AS IS AND WITHOUT EXPRESS OR IMPLIED WARRANTY OF ANY KIND BY EITHER TRIMBLE OR ANYONE WHO HAS BEEN INVOLVED IN ITS CREATION PRODUCTION INSTALLATION OR DISTRIBUTION INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE TITLE AND NONINFRINGEMENT THE STATED EXPRESS WARRANTIES ARE IN LIEU OF ALL OBLIGATIONS OR LIABILITIES ON THE PART OF TRIMBLE ARISING OUT OF OR IN CONNECTION WITH ANY PRODUCT BECAUSE SOME STATES AND JURISDICTIONS DO NOT ALLOW LIMITATIONS ON DURATION OR THE EXCLUSION OF AN IMPLIED WARRANTY THE ABOVE LIMITATION MAY NOT APPLY TO YOU Limitation of Liability TRIMBLES ENTIRE LIABILITY UNDER ANY PROVISION HEREIN SHALL BE LIMITED TO THE AMOUNT PAID BY YOU FOR THE PRODUCT TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW IN NO EVENT SHALL TRIMBLE OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGE WHATSOEVER UNDER ANY CIRCUMSTANCE OR LEGAL THEORY RELATING IN ANYWAY TO THE PRODUCTS SOFTWARE AND ACCOMPANYING DOCUMENTATION AND MATERIALS INCLUDING WITHOUT LIMITATION DAMAGES FOR LOSS OF BUSINESS PROFITS BUSINESS INTERRUPTION LOSS OF DATA OR ANY OTHER PECUNIARY LOSS REGARDLESS OF WHETHER TRIMBLE HAS BEEN ADVISED OF THE POSSIBILITY OF ANY SUCH LOSS AND REGARDLESS OF THE COURSE OF DEALING WHICH DEVELOPS OR HAS DEVELOPED BETWEEN YOU AND TRIMBLE BECAUSE SOME STATES AND JURISDICTIONS DO NOT ALLOW THE EX
28. CLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES THE ABOVE LIMITATION MAY NOT APPLY TO YOU PLEASE NOTE THE ABOVE TRIMBLE LIMITED WARRANTY PROVISIONS WILL NOT APPLY TO PRODUCTS PURCHASED IN THOSE JURISDICTIONS E G MEMBER STATES OF THE EUROPEAN ECONOMIC AREA IN WHICH PRODUCT WARRANTIES ARE THE RESPONSIBILITY OF THE LOCAL DEALER FROM WHOM THE PRODUCTS ARE ACQUIRED IN SUCH A CASE PLEASE CONTACT YOUR TRIMBLE DEALER FOR APPLICABLE WARRANTY INFORMATION Notice to Australian Purchasers The Australian Consumer Law Our goods come with guarantees that cannot be excluded under the Australian Consumer Law You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure Trimble s warranty as set out in the user manual accompanying this statement or as described in the warranty card accompanying the Product you purchased is in addition to any mandatory rights and remedies that you may have under the Australian Consumer Law Official Language THE OFFICIAL LANGUAGE OF THESE TERMS AND CONDITIONS IS ENGLISH IN THE EVENT OF A CONFLICT BETWEEN ENGLISH AND OTHER LANGUAGE VERSIONS THE ENGLISH LANGUAGE SHALL CONTROL End User License Agreement for Product Software IMPORTANT READ CAREFUL
29. COM optons tap and hold an existing port 5 Select the COM port on the Juno series handheld to use for the connection New Outgoing Port The Juno series handheld has five COM ports COMO COM1 COM2 COM3 and COM8 available for connections out to Bluetooth enabled serial devices Juno Series Handhelds User Guide 65 66 6 Doone of the following To communicate with any device for example if you have formed this connection without pairing to a device clear the Secure Connection check box To communicate only with devices with which the handheld has a Bluetooth partnership select the Secure Connection check box 7 Tap Finish 8 Tap OK to close the Bluetooth application 9 Tap W to close the Settings screen Step 3 Configuring the GNSS field software to use data from the serial device Once you configure the connection between the Juno series handheld and the Bluetooth enabled serial device you must configure the software to use the connection to receive data To use a Bluetooth enabled external sensor such as a laser rangefinder or a barcode scanner in TerraSync software refer to the TerraSync software documentation on http www trimble com mappingGIS TerraSync aspx dtID technical_support Connecting to an office computer using Bluetooth wireless technology Instead of using a USB or serial cable to physically connect to an office computer you can use Bluetooth wireless technology to connect to Active
30. Camera button on the front of the handheld 2 Tap Pictures amp Videos eg Camera Di The camera application is started in Camera mode or Video mode depending on what mode was last used Ifin Camera mode tap the Video mode icon to switch to video mode Ifin Video mode tap the Camera mode icon to switch to camera mode 78 Juno Series Handhelds User Guide Camera settings The cameras current settings are displayed as icons on the screen Tap the required icon to change its setting The available settings vary depending on whether you are in Camera mode or Video Setting Camera mode Video mode Exit camera application Both Access Pictures amp Videos Both Settings Both Operating mode Both e Image capture e Video capture File storage location Both e Device memory e Memory card Brightness adjustment Tap the numbers to lighten the Both image tap the numbers to darken the image Replay time Tap the time you would like for the image or Both video replay to remain on screen e 5 seconds e 2seconds e until you prompt the image or video to close e no replay Juno Series Handhelds User Guide 79 Icon SMP 3MP IMP Setting Resolution e VGA video graphics array 640 x 480 e 5MP 2592 x 1944 e 3MP 2048 x 1536 e 1MP 1280 x 960 Note The larger the resolution the larger the file size The selected resolutions displays at the top of the screen Show date stamp Tap to
31. Desktop software Factors that affect the accuracy of postprocessed DGNSS include the type of receiver and antenna used at the base station the distance between the base station and the location where the rover data was collected the accuracy of the base station position and the logging interval at the base station For more information refer to the documentation provided with the postprocessing software Postprocessed real time DGNSS The accuracy of positions using the Juno series handheld is within one to three meters postprocessed or two to five meters with real time differential correction The accuracy of real time SBAS corrected positions can be improved to one to three meters with postprocessing If your data files contain autonomous uncorrected positions as well as real time corrected positions Trimble recommends that you postprocess the data During postprocessing you can choose whether to correct only autonomous positions or all positions Configuring NMEA output You can use the Juno series handhelds integrated GNSS receiver with any GNSS field software that accepts NMEA messages Juno Series Handhelds User Guide To configure the NMEA data output settings use the GPS Controller EET GPS Controller software The software is provided free from the Trimble website For more information see a Supported GNSS field software page 72 a Se Output Interval To configure NMEA data output Receiver Port Pri
32. Explorer bv rl oer RO and go to the file you want to send receive Bluetooth beams 3 Tap and hold the file and then select Beam File Infrared Align ports The handheld scans for nearby devices jail 4 Tap the device you want to send the file to The file is sent to the device A message reports Done or Failed depending on the outcome of the file transfer Accessing a corporate network through your Internet connection Use a Virtual Private Network VPN connection to access a corporate network or Intranet Before you begin obtain the following information from your network administrator e username and password e domain name e host name or IP address of the VPN server To access a corporate network through your Internet connection you must Juno Series Handhelds User Guide 69 1 Setup an Internet connection on the handheld 2 Setup a VPN connection 3 Connect to the corporate network or Intranet Step 1 Setting up an Internet connection on the handheld Do one of the following e Set up a Wi Fi connection to an access point For more information see page 53 e Connect to the Internet using the internal cellular modem Juno 3D only For more information see page 51 e Connect to the Internet using a Bluetooth enabled phone For more information see page 60 Step 2 Setting up a VPN connection EEPE Sh x GD 10 23 Make New Connection 1 On the Juno series handheld tap 3 Settings i Conn
33. Installation wizard Depending on the GNSS field software you have installed you can use the software to configure settings such as GNSS real time correction and antenna settings You may also be able to use the software to connect to a real time correction source configure logging settings and collect features For more information refer to the rest of this chapter and the documentation for the GNSS field software Starting the GNSS field software Tap amp Programs and then select the GNSS field software for example TerraSync When you first open any Trimble GNSS field software the Skyplot section is displayed Juno Series Handhelds User Guide Viewing available GPS satellites TerraSync Paid Ge 9 21 Use the graphical Skyplot section or the Satellite Info section in the installed Trimble GNSS field software to view detailed GNSS information Note To receive signals from GPS satellites the handheld must have a clear view of the sky GPS positions may not always be available particularly in or near buildings in 43 32 40 840 S 172 35 29 429 E vehicles or under tree canopy i fails nage WSs 1984 Filled black boxes represent satellites that the receiver _ enss settings Max PDOP 99 0 is using to compute its current GPS position Unfilled Min Elevation 5 Min SNR 12 0 white boxes represent satellites that the receiver is getting signals from but is not using because the signals are too weak In
34. LY THIS END USER LICENSE AGREEMENT EULA IS A LEGAL AGREEMENT BETWEEN YOU AND Trimble Navigation Limited Trimble and applies to the computer software provided with the Trimble product purchased by you whether built into hardware circuitry as firmware embedded in flash memory or a PCMCIA card or stored on magnetic or other media or provided as a stand alone computer software product and includes any accompanying written materials such as a user s guide or product manual as well as any online or electronic documentation Software or Product Software This EULA will also apply to any Software error corrections updates and upgrades subsequently furnished by Trimble unless such are accompanied by different license terms and conditions which will govern their use You have acquired a Trimble Product Device that includes Software some of which was licensed by Trimble from Microsoft Corporation or its affiliates collectively Microsoft The Software licensed from Microsoft as well as associated updates supplements internet based services and support services media printed materials and online or electronic documentation Microsoft Software are protected under this EULA The Software is also protected by copyright laws and international copyright treaties as well as other intellectual property laws and treaties The Software is licensed not sold BY USING THE SOFTWARE INCLUDING USE ON THIS DEVICE YO
35. Memory cards As an alternative to storage memory you can save data to a memory card Use either a microSD or a microSDHC high capacity memory card to securely transfer data to and from another device that supports microSD or microSDHC memory cards Note The Juno series handheld does not support SDIO SD input output cards CAUTION The presence of any dust or moisture in the memory card slot may adversely affect the device and void your Trimble warranty To prevent dust or moisture entering the memory card slot When inserting or removing a memory card place the handheld on a dust free indoor surface CAUTION Static electricity can harm electronic components inside the handheld To prevent static damage discharge static electricity from your body before you touch any of the electronic components inside your device such as a memory module You can do so by touching an unpainted metal surface To insert a microSD or microSDHC memory card 1 Turn off the handheld See Turning on and turning off the handheld page 20 2 Place the handheld face down on a dust free indoor surface p9 Remove the battery cover door and then remove the battery See Inserting and removing the battery page 18 Slide the card slot cover to the left and it will hinge open Place the memory card in the slot with the swipes facing down Lower the cover and slide it back to the right The card is locked into place ot p e SS Replace the b
36. SM UMTS is selected and the phone will connect to either that is available Alternatively you can specifically select GSM or UMTS from the drop down menu Select the Network tab to view which network you are connected to or manually select a desired network Juno Series Handhelds User Guide 41 Text messaging Use the phone functionality on the Juno 3D handheld to send and receive text messages 1 Make sure that a SIM card is installed See Installing and removing the SIM card page 26 2 Make sure that the phone is turned on See Turning on and turning off the integrated radios page 48 3 Do one of the following e To send a text message a On the Home screen select the Text item this shows Text Messages x unread or No New messages Alternatively tap amp Text b Tap New c To enter a contact number make sure that the cursor is flashing in the To field and then do one of the following Usethe keyboard to enter a phone number a From Text Messages Select Menu Add Recipient to select a number from your Contacts d Tap in the message area the cursor will flash and then enter the text using the keyboard e Tap E to send the message e To access your text message folders Text Messages Ee eel Y cer 10 14 a Onthe Home screen select the Text item J show Recewed bi this may show Text Messages x unread or T i Outlook E mail No New messages and then tap again fill Text
37. Sync technology or the Windows Mobile Device Center on a Bluetooth enabled office computer Note Not all Bluetooth devices and Bluetooth management software support ActiveSync connections Check with the manufacturer of the office computer for compatibility Note The exact steps required may vary depending on the office computer To connect to a office computer to use ActiveSync or WMDC with a Bluetooth connection you must 1 Set up the connection to the computer 2 Connect to ActiveSync or WMDC using Bluetooth wireless technology Step 1 Setting up the connection to the computer 1 From the Bluetooth user interface on the office computer make sure that the computer allows itself to be discovered by other Bluetooth devices 2 Configure ActiveSync technology or WMDC on the office computer to connect to the correct Bluetooth port The steps required depend on the operating system installed on the office computer If the office computer is using e the Windows 7 or Windows Vista operating system Juno Series Handhelds User Guide b C From the Start menu on the office computer select Control Panel Windows Mobile Device Center If you have previously connected to a device using USB or another connection method the Windows Mobile Device Center screen for this device may show In this case select Mobile Device Settings The Connection Settings dialog appears amp Connection Settings Waiting for device
38. Tap OK Backlight The backlight makes the screen easier to read in low light but uses extra power Use the Backlight control to configure power saving settings for the backlight To open the Backlight control e Tap Settings System Backlight To set the backlight to automatically turn off Backlight gt K 2 6 10 Brightness lt Battery Power gt External 1 To automatically turn off the backlight when the handheld is idle and is using battery power tap the ee ee ee een nce batters be Battery Power tab Select the Turn off backlight f fr Turn off backlight if check box and then select a time from the LXC device is nat used for drop down list Fq Tum on backlight when a button amp gt pressed or the screen is tapped Adjust power settings to conserve power Juno Series Handhelds User Guide 37 2 To automatically turn off the backlight when the per G ot x a 6 11 handheld is idle and is using external power tap EN E en Lebo the External Power tab Select the Turn off backlight F4 Turn off backlight if check box and then select a time from the device is not used for homn drop down list Fq Tum on backlight when a button i pressed or the screen is tapped 3 Tap OK Adjust power settings to conserve power Q k To change the brightness Backlight d G05 External nghtnes Battery 1 Tap the Brightness tab Oy meee Brightness Level 2 Tap and drag the Brightness Level
39. U ACCEPT THESE TERMS IF YOU DO NOT ACCEPT THEM DO NOT USE THE DEVICE OR SOFTWARE INSTEAD CONTACT TRIMBLE FOR A REFUND OR CREDIT As described below using some features also operates as your consent to the transmission of certain standard computer information for Internet based services WARNING If the Software contains voice operated technologies then operating this Software requires user attention Diverting attention away from the road while driving can possibly cause an accident or other serious consequence Even occasional short diversions of attention can be dangerous if your attention is diverted away from your driving task at a critical time Trimble and Microsoft make no representations warranties or other determinations that ANY use of this Software is legal safe or in any manner recommended or intended while driving or otherwise operating a motor vehicle This EULA does not grant you any rights with respect to the Windows Mobile Device Center Microsoft ActiveSync or Microsoft Outlook 2007 Trial which are subject to the licenses accompanying those items 1 SOFTWARE PRODUCT LICENSE 1 1 License Grant Subject to the terms and conditions of this EULA Trimble grants you a non exclusive right to use one copy of the Software in a machine readable form only as installed on the Device Such use is limited to use with the Device for which it was intended as set forth in the product documentation The Device Software is licensed wit
40. UCH AS COUNTRIES OF THE EUROPEAN UNION IN WHICH PRODUCT WARRANTIES ARE OBTAINED FROM THE LOCAL DISTRIBUTOR IN SUCH CASES PLEASE CONTACT YOUR TRIMBLE DEALER FOR APPLICABLE WARRANTY INFORMATION 3 TRIMBLE LIMITATION OF LIABILITY 3 1 LIMITATION OF LIABILITY TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW IN NO EVENT SHALL TRIMBLE OR ITS SUPPLIERS BE LIABLE FOR ANY SPECIAL INCIDENTAL INDIRECT CONSEQUENTIAL OR PUNITIVE DAMAGES HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF LIABILITY INCLUDING WITHOUT LIMITATION DAMAGES FOR LOSS OF BUSINESS PROFITS BUSINESS INTERRUPTION LOSS OF BUSINESS INFORMATION OR ANY OTHER PECUNIARY LOSS ARISING OUT OF THE USE OR INABILITY TO USE THE SOFTWARE OR THE PROVISION OF OR FAILURE TO PROVIDE SUPPORT SERVICES EVEN IF TRIMBLE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES AND NOTWITHSTANDING ANY FAILURE OF ESSENTIAL PURPOSE OF ANY EXCLUSIVE REMEDY PROVIDED IN THIS EULA IN NO EVENT SHALL THE TOTAL CUMULATIVE LIABILITY OF TRIMBLE AND ITS SUPPLIERS IN CONNECTION WITH THIS EULA OR THE SOFTWARE WHETHER BASED ON CONTRACT WARRANTY TORT INCLUDING NEGLIGENCE STRICT LIABILITY OR OTHERWISE EXCEED THE ACTUAL AMOUNT PAID TO TRIMBLE FOR THE SOFTWARE LICENSE GIVING RISE TO THE CLAIM BECAUSE SOME STATES AND JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES THE ABOVE LIMITATION MAY NOT APPLY TO YOU 4 GENERAL 4 1 This EULA shall be go
41. USER GUIDE Trimble Juno Series Handhelds Juno 3B and Juno 3D m Safety information m About the Juno series handhelds m Getting started m Using the Windows Embedded Handheld operating system m Connecting to an office computer m Using the integrated radios to connect to other devices m Using the GNSS receiver m Using the camera E Troubleshooting Version 1 00 Revision B May 2012 Trimble Trimble Navigation Limited 10355 Westmoor Drive Suite 100 Westminster CO 80021 USA www trimble com Legal Notices Copyright and Trademarks 2008 2012 Trimble Navigation Limited All rights reserved Trimble the Globe amp Triangle logo GPS Pathfinder and Juno are trademarks of Trimble Navigation Limited registered in the United States and in other countries GeoBeacon GPS Analyst GPScorrect TerraSync and VRS are trademarks of Trimble Navigation Limited Microsoft ActiveSync Excel Outlook PowerPoint Windows Windows Live Windows Media Windows Mobile Windows Vista and the Windows Start logo are either registered trademarks or trademarks of Microsoft Corporation in the United States and or other countries The Bluetooth word mark and logos are owned by the Bluetooth SIG Inc and any use of such marks by Trimble Navigation Limited is under license All other trademarks are the property of their respective owners Release Notice This is the May 2012 release Revision B of the Juno Series Han
42. a heat source such as near a fireplace or other heat generating appliance or otherwise expose it to temperatures in excess of 70 C 158 F such as on a vehicle dashboard When heated to excessive temperatures battery cells could explode or vent posing a risk of fire Do not immerse the battery in water Do not use or store the battery inside a vehicle during hot weather Do not drop or puncture the battery Do not open the battery or short circuit its contacts WARNING Avoid contact with the rechargeable Lithium ion battery if it appears to be leaking Battery fluid is corrosive and contact with it can result in personal injury and or property damage To prevent injury or damage If the battery leaks avoid contact with the battery fluid If battery fluid gets into your eyes immediately rinse your eyes with clean water and seek medical attention Do not rub your eyes If battery fluid gets onto your skin or clothing immediately use clean water to wash off the battery fluid Juno Series Handhelds User Guide 9 10 WARNING Charge and use the rechargeable Lithium ion battery only in strict accordance with the instructions Charging or using the battery in unauthorized equipment can cause an explosion or fire and can result in personal injury and or equipment damage To prevent injury or damage Do not charge or use the battery if it appears to be damaged or leaking Charge the Lithi
43. aining in the battery Before storing the handheld completely shut down the battery drops when the handheld is turned off Suspend mode or was left fully charged for a long duration handheld see Turning on and turning off the handheld page 20 Then store the handheld as recommended see Storage page 13 Juno Series Handhelds User Guide 83 Problem Cause A fully charged battery does not last a full day The internal temperature has risen above the allowed maximum for optimum battery performance The handheld and battery were operating in a hot environment The handheld and battery were operating in a very cold environment The battery has reached or exceeded is maximum charge cycles lifespan Backlight issues Cause The backlight is not set to turn on in the Backlight control Problem The backlight does not come on when you tap the screen or press a button The screen is blank or hard to see The backlight is off The backlight level needs to be adjusted Touch screen issues Problem Cause The touch screen is incorrectly aligned The touch screen does not respond to stylus taps The touch screen is locked Solution Remove the handheld and battery from any external heat sources for example sunlight Using the handheld in cold temperatures consumes additional battery power and so shortens battery life between charges Keep a spare charged battery when working
44. ally provided Otherwise enter the Network key and the Key index Tap Next For increased security select the Use IEEE amp 02 1x network access control check box and then configure additional authentication information Tap Finish Step 2 Connecting to the network or access point l Disconnect the USB data cable as the handheld prioritizes a USB connection over a Wi Fi connection Bring the handheld within range of the network or access point When a Wi Fi connection is detected the access point icon E4 appears on the title bar and a notification message appears on the left softkey Juno Series Handhelds User Guide 53 54 If the access point icon or the notification does not appear use the Wireless Manager to turn off and then turn back on the Wi Fi radio When the Wi Fi radio is turned on any networks or access points within range are detected and the icon and notification appear 3 Tap the access point icon on the title bar or tap Notification or press the left softkey A popup message shows the available networks 4 Select the network you want to connect to and then tap OK or press he left softkey 5 Select The Internet or work via a VPN or Work and then tap Connect or press the left softkey 6 Ifa Network Log On screen appears enter your user name password and domain information and then tap OK on the left softkey When the handheld is connected to the network or access point the Wi Fi conne
45. and ActiveSync technology on the office computer 3 4 On the handheld tap amp Settings Bluetooth In the Devices tab tap Add new device The handheld searches for other Bluetooth devices and displays them in the list Tap the name of the computer you want to connect to and then tap Next When prompted enter a passcode of your choice that you will easily remember on the handheld Enter the same passcode on the office computer On the handheld select the ActiveSync check box in the list of services provided by the computer and then tap Finish Note The checkbox on the handheld still shows ActiveSync even if the office computer is running the Windows 7 or Windows Vista operating system and you are using the WMDC 10 ll You have now created a partnership between the Juno series handheld and the office computer so that they can communicate Tap OK to close the Bluetooth application Tap gg to close the Settings screen To connect go to Step 2 below Note that the check box on the handheld shows ActiveSync even if the office computer is running the Windows 7 or Windows Vista operating system and you are using the WMDC Step 2 Connecting to ActiveSync using Bluetooth wireless technology l On the Juno series handheld tap amp ActiveSync Note Only ActiveSync shows on the Windows embedded handheld Select ActiveSync even if you use the WMDC on the desktop computer 2 Tap Menu and then sel
46. ard button or tap a text box in the application To enter characters use your finger or the stylus to tap the keys on the keyboard When you finish entering text in a field tap Tab to accept the text you have entered and then move to the next field Keyboard Keyboard button To enter special characters tap 123 to display keyboards containing numbers and symbols To switch back to the main keyboard tap 133 again To hide the keyboard tap the keyboard icon again Tip To make the keys larger tap J Settings Personal Input In the Input method list select Keyboard and then tap Large Keys Drawing and writing directly on screen In some applications for example Notes you can draw or write directly on the screen using the stylus 1 Tap and then tap the Notes icon P 2 Tap the Menu icon Draw 3 Select Draw Undo 4 Use the stylus to write or draw on the screen Juno Series Handhelds User Guide 31 32 Making a recording For handheld configurations equipped with an integrated microphone you can create a stand alone voice note or you can add a recording to a note Then you can work with voice notes in the same way that you work with notes To make a recording 1 Tap and then tap the Notes icon 2 Tap the Menu W icon 3 Do one of the following To create a stand alone recording in the screen displaying the list of notes tap the create Lopy Record button gO to begin
47. are connecting to a phone skip this section and go to Connecting to a Bluetooth enabled phone for Internet access on page 60 where the pairing step is described as part of the procedure for connecting to a phone Trimble recommends using a paired connection if pairing is supported by the other device as a paired connection creates a more secure connection and makes reconnecting to the device easier For more information see Pairing with a Bluetooth enabled device below Some devices do not support paired connections Use a non paired connection if the device does not have a keyboard and if you know that the device does not automatically exchange a pre programmed passkey during pairing For more information see Setting up a connection to a non paired device page 58 To connect the Juno series handheld to the other device do one of the following e Pair with a Bluetooth enabled device see below e Set up a connection to a non paired device see page 58 Juno Series Handhelds User Guide Pairing with a Bluetooth enabled device Pairing the handheld with another Bluetooth enabled device creates a permanent security bond between the devices which helps to exchange information securely between the devices The paired relationship is established when two devices create and exchange a link key Once the relationship is established the handheld and the other Bluetooth device only need to have their Bluetooth radios turned on to exchange in
48. arrows for example the DUN service is used for a connection to a cell phone and the Serial Port service is used for a serial connection to a barcode scanner or laser rangefinder The solid arrows indicate the flow of information between devices For example when the Juno series handheld connects as a client to e acellphone the handheld uses the DUN or PAN host service provided by the phone to access the Internet and background map data e alaptop computer or office computer the devices use the ActiveSync service to exchange information to and from either device e Bluetooth headphones the handheld uses the Wireless Stereo host service provided by the headphones to play audio files and system sounds Setting up a Bluetooth connection To use another Bluetooth enabled device with the Juno series handheld you must form a Bluetooth connection between the two devices during which you select the type of service to use for the connection This defines how the devices will communicate with each other After forming the Bluetooth connection between the devices you may need to configure settings for the connection such as the COM port for the field software to use or the number for the phone to dial You must then connect to the other device using the appropriate software application To connect the Juno series handheld to another Bluetooth enabled device you can use either a paired connection or a non paired connection Note If you
49. ata Users who do not want such tracking and monitoring should avoid using such applications aGPS uses your wireless service provider s network and therefore airtime data charges and or additional charges may apply in accordance with your service plan Contact your wireless service provider for details Note this service is not provided by all networks Please contact your cellular service provider if you wish to confirm that this service is provided Canada This Class B digital apparatus complies with Canadian ICES 003 This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of the Canadian Department of Communications Cet appareil num rique de la classe B est conforme la norme NNB 003 du Canada Le pr sent appareil num rique n met pas de bruits radio lectriques d passant les limites applicables aux appareils num riques de Classe B prescrites dans le reglement sur le brouillage radio lectrique dict par le Minist re des Communications du Canada Europe This product has been tested and found to comply with all requirements for CE C 0 67 8 1 Marking and sale within the European Economic Area EEA It is classified and marked as being Class 2 Radio Equipment under 2000 299 EC as Bluetooth and Wi Fi approvals are country specific Please consult your local distributor for more information The Juno series
50. attery and the battery cover door When you select the Save As option in an application the memory card appears in the list of available storage locations Note Do not store required data or applications to a memory card if the card will be removed Data saved to a memory card is available only when the card is inserted in the handheld To remove the memory card from the memory card slot 1 Turn off the handheld See Turning on and turning off the handheld page 20 2 Place the handheld face down on a dust free indoor surface 3 Remove the battery cover door and then remove the battery See Inserting and removing the battery page 18 4 Slide the card slot cover to the left to open it remove the card then lower the card slot cover and slide it to the right to lock it 5 Replace the battery and the battery cover door Juno Series Handhelds User Guide Encrypting files on memory cards To prevent sensitive data on a memory card from being used if the card is lost or stolen files can be encrypted as they are placed on the card When encryption is enabled an encryption key is stored on the handheld Files are encrypted as they are copied or written to the memory card Files already saved on memory cards before enabling encryption are not automatically encrypted Note Because the encryption key is stored on the handheld encrypted files are only readable on the handheld on which they are initially encrypted It is not poss
51. battery level see Checking the level of battery power page 19 Tap the Advanced tab to set the time before the handheld turns off when idle see Suspend mode page 21 Sounds and notifications Use the Sounds amp Notifications control to set preferences for the speaker volume and system sounds To open the Sounds amp Notifications control e Tap amp Settings Sounds amp Notifications Juno Series Handhelds User Guide 35 To turn on or turn off sounds Sounds amp Motificat gc X ft qE 6 19 1 Tap the Sounds tab Notificatio Sounds _Notificatio Enable sounds for 2 Select or clear the check boxes to enable or disable categories of sounds x Events warnings system events x Programs 3 If you select the Screen taps or Hardware buttons SE Hoiicaiions alare reminders check boxes select the Soft or Loud option to control the volume of the sounds Be 4 Tap OK Hardware buttons You can use predefined schemes to customize sounds or you can create your own sound schemes To specify a sound scheme Sounds amp Notificat F g gt X 4 6 20 1 Tap the Notifications tab Sounds lt Notifications Sounds Event i 2 From the Event drop down list select an event Pen 3 Select the type of notification you want to receive x Play sound for that event Repeat 4 Tap OK Screen Use the Screen control to align the touch screen or to change the appearance
52. commence any litigation that may arise under this EULA in the courts of The Hague The Netherlands 4 3 Trimble reserves all rights not expressly granted by this EULA 4 4 Official Language The official language of this EULA and of any documents relating thereto is English For purposes of interpretation or in the event of a conflict between English and versions of this EULA or related documents in any other language the English language version shall be controlling Registration To receive information regarding updates and new products please contact your local dealer or visit the Trimble website at www trimble com register Upon registration you may select the newsletter upgrade or new product information you desire Notices Class B statement Notice to users This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communication However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful i
53. cted icon appears in the title bar 7 Start using the program you want to use for example Windows Explorer Mobile or Internet Explorer Note To disconnect from the network or an access point at any time turn off the handheld wireless radio To do this tap title bar tap the Connectivity icon i on the pull down list select Wireless Manager and then tap the Wi Fi button To delete a Wi Fi connection tap and hold the connection in the Wireless tab of the Wi Fi Settings screen and then select Remove Settings Connecting to a Bluetooth enabled device The Juno series handheld has an integrated Bluetooth radio that you can use to establish a wireless connection to other Bluetooth devices that are within range Using a Bluetooth connection you can communicate with devices such as cellular phones office computers other handhelds and Bluetooth enabled laser rangefinders and barcode scanners You can also communicate with peripheral devices that use Bluetooth adaptors instead of serial or USB connections The Juno series handheld can act as a Bluetooth client device The concept of client devices is explained in detail below Juno Series Handhelds User Guide Connecting to a Bluetooth device as a client You can use the Juno series handheld as a client device which uses services offered by Bluetooth host devices that are within range In general the host device provides information to the client device but in some cases the cl
54. cts information data systems interfaces or devices not made supplied or specified by Trimble ii the operation of the Product under any specification other 2 Juno Series Handhelds User Guide than or in addition to Trimble s standard specifications for its products iii the unauthorized installation modification or use of the Product iv damage caused by accident lightning or other electrical discharge fresh or salt water immersion or spray outside of Product specifications or exposure to environmental conditions for which the Product is not intended v normal wear and tear on consumable parts e g batteries or vi cosmetic damage Trimble does not warrant or guarantee the results obtained through the use of the Product or Software or that software components will operate error free NOTICE REGARDING PRODUCTS EQUIPPED WITH TECHNOLOGY CAPABLE OF TRACKING SATELLITE SIGNALS FROM SATELLITE BASED AUGMENTATION SYSTEMS SBAS WAAS EGNOS AND MSAS OMNISTAR GPS MODERNIZED GPS OR GLONASS SATELLITES OR FROM IALA BEACON SOURCES TRIMBLE IS NOT RESPONSIBLE FOR THE OPERATION OR FAILURE OF OPERATION OF ANY SATELLITE BASED POSITIONING SYSTEM OR THE AVAILABILITY OF ANY SATELLITE BASED POSITIONING SIGNALS THE FOREGOING LIMITED WARRANTY TERMS STATE TRIMBLE S ENTIRE LIABILITY AND YOUR EXCLUSIVE REMEDIES RELATING TO THE TRIMBLE PRODUCT EXCEPT AS OTHERWISE EXPRESSLY PROVIDED HEREIN THE PRODUCT AND ACCOMPANYING DOCUMENTATION
55. ded from this update process and limited warranty Receipt of Software Fixes or other enhancements shall not serve to extend the limited warranty period For purposes of this warranty the following definitions shall apply 1 Fix es means an error correction or other update created to fix a previous software version that does not substantially conform to its Trimble specifications 2 Minor Update occurs when enhancements are made to current features in a software program and 3 Major Upgrade occurs when significant new features are added to software or when a new product containing new features replaces the further development of a current product line Trimble reserves the right to determine in its sole discretion what constitutes a Fix Minor Update or Major Upgrade 2 3 Customer Remedies Trimble and its suppliers entire liability and your sole remedy with respect to the Software shall be either at Trimble s option a repair or replacement of the Software or b return of the license fee paid for any Software that does not meet Trimble limited warranty This limited warranty is void if failure of the Software has resulted from 1 accident misuse abuse or misapplication 2 alteration or modification of the Software without Trimble s authorization 3 interaction with software or hardware not supplied or supported by Trimble 4 your improper inadequate or unauthorized installation maintenance or storage or
56. dhelds User Guide covering Models TNJ31 and TNJ32 The Juno series handhelds operating system is based on Microsoft Windows Embedded Handheld 6 5 Professional operating system Limited Warranty Terms and Conditions Product Limited Warranty Subject to the terms and conditions set forth herein Trimble Navigation Limited Trimble warrants that for a period of 1 year from date of purchase this Trimble product the Product will substantially conform to Trimble s publicly available specifications for the Product and that the hardware and any storage media components of the Product will be substantially free from defects in materials and workmanship Product Software Product software whether built into hardware circuitry as firmware provided as a standalone computer software product embedded in flash memory or stored on magnetic or other media is licensed solely for use with or as an integral part of the Product and is not sold The terms of the end user license agreement as included below govern the use of the Product Software including any differing limited warranty terms exclusions and limitations which shall control over the terms and conditions set forth in the limited Product warranty Warranty Remedies Ifthe Trimble Product fails during the warranty period for reasons covered by this limited warranty and you notify Trimble of such failure during the warranty period Trimble will repair OR replace the nonconf
57. ds User Guide To check the connection status at any time tap the title bar and then tap the required status icon on the pull down list To end the connection at any time tap the title bar tap the required status icon on the pull down list and then tap Disconnect To connect to a corporate network or Intranet see page 69 To send and receive email messages see Messaging page 38 Step 3 Configuring the GNSS field software to use data received from the Internet source Now that you have connected the Juno series handheld to the Internet you must configure the software to use the connection to receive data To use real time corrections in Trimble field software and background map data in the TerraSync software refer to the Trimble field software documentation on www trimble com e For the TerraSync software go to http www trimble com mappingGIS TerraSync aspx dtID technical_support e For the GPS Controller software go to http www trimble com support_trl asp Nav Collection 32054 Reconnecting to the Internet To reconnect to the Internet at any time after setting up the connection repeat the steps listed under Step 2 Connecting to the Internet using the dialup network on page 62 Connecting to the Internet through a Bluetooth enabled phone using the Bluetooth PAN profile This section describes how to set up a Bluetooth Personal Area Network PAN connection for Internet access using Bluetooth enabled cellular phone
58. e e Email messages in the Outbox folder on the handheld are transferred to Exchange or Outlook and then sent from those programs e Email messages in subfolders in other email folders in Outlook are synchronized only if they were selected for synchronization using ActiveSync technology or the WMDC To send and receive email for a synchronized Exchange or Outlook account connect the handheld to the office computer Synchronization automatically begins and the handheld sends and receives email Connecting directly to an email server In addition to synchronizing email messages with an office computer you can send and receive email messages by connecting to an email server Before you can send and receive email you must create an email account in the Messaging software Note You must set up an Internet connection on the handheld before you can set up and use your email account For more information see Connecting to a Wi Fi access point page 53 Connecting to a Bluetooth enabled device page 54 or Connecting to a Bluetooth enabled phone for Internet access page 60 If you need to connect to different mailboxes set up and name a different service for each connection Note The Messaging software supports only the POP3 and IMAP4 protocols for incoming mail and SMTP for outgoing mail To set up a mail service Messaging Col gt E 2 CH 12 09 1 Tap E mail E mail Setup E mail address 3 Enter the email addre
59. e Software 4 No service bureau work multiple user license or time sharing arrangement is permitted For purposes of this EULA service bureau work shall be deemed to include without limitation use of the Software to process or to generate output data for the benefit of or for purposes of rendering services to any third party over the Internet or other communications network 5 You may make one backup copy of the Software You may use it only to reinstall the Software on the Device 6 You may transfer the Software only with the Device the Certificate of Authenticity label and these license terms directly to a third party Before the transfer that party must agree that these license terms apply to the transfer and use of the Software You may not retain any copies of the Software including the backup copy 7 The Software is subject to United States export laws and regulations You must comply with all domestic and international export laws and regulations that apply to the Software These laws include restrictions on destinations end users and end use For additional information see http www microsoft com exporting 8 Without prejudice as to any other rights Trimble may terminate this EULA without notice if you fail to comply with the terms and conditions of this EULA In such event you must destroy all copies of the Software and all of its component parts 9 If the Microsoft Software includes speech recognition component s
60. e connection to the network 2 Connect to the cellular network Before you begin the steps below Trimble recommends that you e make sure that a SIM card is inserted in the handheld See Installing and removing the SIM card page 26 e confirm that the modem can access the Internet directly If necessary contact your service provicer and confirm whether you must enter a user name password and domain details when connecting e make sure that you have the correct APN Access Point Name from your cellular provider Step 1 Configure the connection To set up an automatic configuration 1 Tap Settings Connections Wireless Manager If the Phone is Off tap Phone to turn it on Close the Wireless Manager 2 Tap Settings Connections Connections 3 On the Connections screen on the Tasks tab tap Automatically configure connection Juno Series Handhelds User Guide 51 The device holds a database of the most common cellular providers and the correct connection settings The handheld will attempt to identify the SIM vendor If the SIM vendor is recognised correctly tap Next to continue The connection settings are set up automatically The process takes about 30 seconds If the SIM is not automatically detected or the vendor settings are not known you will need to set up the configuration manually Go to To set up a manual configuration below To set up a manual configuration l SY eae w p a Tap
61. e information refer to the ActiveSync Help Tip If the GPS Pathfinder Office software is installed on the office computer you can configure the Connection Manager utility in the GPS Pathfinder Office software to automatically detect when you connect a Juno series handheld to the computer This enables you to automatically transfer data from the TerraSync software differentially correct the data and then export it to a GIS For more information refer to the GPS Pathfinder Office Software Help Installing software onto the handheld Before you begin refer to the installation instructions provided with the software Some software installations are specifically designed to run on a Windows Embedded Handheld To install software on a Windows Embedded Handheld 1 Connect the handheld to a computer see page 44 2 Copy the installation files to a folder on the handheld 3 Browse to the folder on the handheld Tap and hold the installation setup file and then select Run 4 Ifprompted after installation perform a soft reset of the handheld see page 22 To install software that is provided on a CD or as an installation setup that runs on an office computer l Connect the handheld to a computer see page 44 2 Ifthe software is provided on a CD insert the software CD into the office computer 3 Run the installation setup 4 If prompted select the install option for a Windows embedded handheld Once the software is i
62. e parts in this product If the AC adaptor becomes damaged replace it with a new Trimble AC adaptor Battery safety WARNING Do not damage the rechargeable Lithium ion battery A damaged battery can cause an explosion or fire and can result in personal injury and or property damage To prevent injury or damage Do not use or charge the battery if it appears to be damaged Signs of damage include but are not limited to discoloration warping and leaking battery fluid Do not store or leave your device near a heat source such as near a fireplace or other heat generating appliance or otherwise expose it to temperatures in excess of 70 C 158 F such as on a vehicle dashboard When heated to excessive temperatures battery cells could explode or vent posing a risk of fire Do not immerse the battery in water Do not use or store the battery inside a vehicle during hot weather Do not drop or puncture the battery Do not open the battery or short circuit its contacts WARNING Avoid contact with the rechargeable Lithium ion battery if it appears to be leaking Battery fluid is corrosive and contact with it can result in personal injury and or property damage To prevent injury or damage If the battery leaks avoid contact with the battery fluid If battery fluid gets into your eyes immediately rinse your eyes with clean water and seek medical attention Do not rub your eyes If batter
63. e radio is connecting to the first network signal it has received Some applications are not fully compatible with all features of the Windows Embedded Handheld 6 5 Professional operating system WAPI issues China only Problem If you use Windows Live and register your email address the following message appears Unable to establish the Internet connection to Windows Live services Please check your Internet setting and ensure the mobile service you paid for includes this data service Please contact your mobile services supplier if you need any help Cause Microsoft email and contacts are not supported over a WAPI connection Audio issues Problem Poor sound from the earpiece Cause Water has pooled in the earpiece Solution Tap QJ Settings Connections Network Cards Tap and hold the network you would prefer to use and then select Connect Use the application buttons on the keypad as they map to the soft keys in the menu bar e To dismiss the notification press the right application button on the keypad e To connect to the network press the left application button Alternatively select a Windows Embedded Handheld application from the Start menu such as the Home screen or File Explorer and the menu bar and soft keys will be displayed correctly Solution Switch to a cellular connection Juno 3D handheld only or a Wi Fi connection Solution Turn the handheld
64. ebsites those links are provided to you only as a convenience and the inclusion of any link does not imply an endorsement of the third party website by Microsoft or Trimble 1 12 Other Rights and Limitations 1 The Software contains valuable trade secrets proprietary to Trimble and its suppliers To the extent permitted by relevant law you shall not nor allow any third party to copy decompile disassemble or otherwise reverse engineer the Software or attempt to do so provided however that to the extent any applicable mandatory laws such as for example national laws implementing EC Directive 91 250 on the Legal Protection of Computer Juno Series Handhelds User Guide 3 Programs give you the right to perform any of the aforementioned activities without Trimble s consent in order to gain certain information about the Software for purposes specified in the respective statutes i e interoperability you hereby agree that before exercising any such rights you shall first request such information from Trimble in writing detailing the purpose for which you need the information Only if and after Trimble at its sole discretion partly or completely denies your request may you exercise such statutory rights 2 This Software is licensed as a single product You may not separate its component parts for use on more than one computer nor make more copies of the software than specified in this EULA 3 You may not rent lease or lend th
65. echnology To download the latest version from the Microsoft website go to www imicrosoft com windowsmobile activesync default mspx Connecting the handheld to a computer To connect the Juno series handheld to a computer 1 Make sure that the handheld and the computer are switched on 2 Make sure you have installed the appropriate connection management software onto the computer see Connection management software page 43 3 To form a connection do one of the following Use a USB connection a Connect the USB data cable to the USB port on the handheld b Connect the other end of the USB data cable to a USB port on the computer Use the handheld s integrated Bluetooth radio to establish a wireless serial link to a Bluetooth enabled computer For more information see Connecting to an office computer using Bluetooth wireless technology page 66 When the handheld and the computer are connected you can manage the connection through a window that appears on the office computer See one of the following Managing the connection using the Windows Mobile Device Center page 44 Managing the connection using ActiveSync technology page 45 Managing the connection using the Windows Mobile Device Center 1 Connect the handheld to the computer see page 44 2 Ifthe Autoplay window appears close the window 3 The Windows Mobile Device Center window displays the message Connected 44 Juno Series Handhelds User Guide
66. ect Connect via Bluetooth On the Juno series handheld a message box shows the status of the connection as it is made When the connection to the office computer is successful you are returned to the ActiveSync application on the handheld Tap gj to close The connectivity icon in the status bar shows or if Wi Fi is connected To check the status of the connection tap the title bar and then tap the connectivity icon on the pull down list 68 Juno Series Handhelds User Guide To disconnect tap QJ ActiveSync on the handheld and then select Menu Disconnect Beaming files to or from another device You can beam files contacts tasks and appointments between the handheld and another device To receive beamed files from another device 1 Make sure that the Juno series handheld s g d GO 10 12 integrated Bluetooth radio is turned on see Beam Mode page 50 Receive all incoming beans 2 Tap Settings Connections Beam 3 Select the Receive all incoming beams check box and then tap OK 4 When another device attempts to beam a file you are prompted to accept the file To receive the file tap Yes Note All incoming files are automatically saved in the My Documents folder on the handheld To send beamed files to another device 1 Make sure that the Juno series handheld s integrated Bluetooth radio is turned on File Explorer see page 50 ee 2 On the Juno series handheld open File
67. ections Connections SAn 2 From the My Work Network list tap Add a new VPN server connection VPN type B PSec L2TP 3 Follow the instructions in the Make New Connection wizard PPTP 4 Tap Finish Step 3 Connecting to the corporate network or Intranet To connect to the corporate network or Intranet simply start using Internet Explorer The Windows Embedded Handheld operating system automatically controls whether the VPN connection is used depending on whether the URL contains a period For example the URL www trimble com contains periods and so the connection to this website is made without using the VPN connection However an address to a network computer or file server that does not contain periods automatically starts the VPN connection If you need to use the VPN connection to access URL addresses that contain periods specify exceptions for the addresses that are within the corporate network To do this 1 Tap Settings Connections Connections 2 Tap the Advanced tab 70 Juno Series Handhelds User Guide oS St oS po Tap Exceptions The Work URL Exceptions screen ears ee appears Tap Add new URL Enter the URL and then tap OK Repeat Step 4 and Step 5 as required Tap OK to return to the Advanced tab of the Connections screen Tap OK to close the Connections screen Tap to close the Settings screen TF your company uses periods in intranet addresses
68. eld 86 Cause The connection is not initiated automatically The Windows Mobile Device Center software does not recognize the Juno series handheld handheld The connection is not enabled in Windows Mobile Device Center on the computer The connection is not enabled on the handheld The handheld connection settings conflict with network settings or VPN client software Juno Series Handhelds User Guide Solution Disconnect the USB cable from the computer and then reconnect the handheld to the computer Alternatively in the Windows Mobile Device Center software on the office computer select Mobile Device Settings Connection Settings Restart the office computer Disconnect the USB cable from the handheld reset it see Resetting the handheld page 22 and then reconnect the cable to the handheld In the Windows Mobile Device Center software on the office computer click Mobile Device Settings Connection Settings If you are using e the USB data cable make sure that the Allow USB connection check box is selected from the drop down list e a Bluetooth connection make sure that the correct port for Bluetooth is selected Then open the Bluetooth control on the handheld In the Devices tab tap the partnership and in the services list make sure that the ActiveSync check box is selected On the handheld tap Q Programs ActiveSync Menu Connections Make sure that the Synchronize all PCs using t
69. ellular phone suddenly handheld while ends Unable to connect to connected to a cellular phone the cellular phone ends the connection mobile device Data encryption settings When setting up a peer to peer ad hoc network with a another Juno series handheld are set incorrectly WEP encryption set a Network Key rather than leaving the key blank to be provided automatically Juno Series Handhelds User Guide 87 Bluetooth wireless technology Problem Cause The handheld cannot The device is out of discover a nearby range Bluetooth device Bluetooth wireless technology is not enabled on one or both devices The device has not been made Discoverable The COM port that you The application cannot assigned to a serial port recognize ports if they service isnot available in are added after the your application application opens The Bluetooth The Bluetooth device has connection fails while in moved out of range use The Bluetooth radio has lost the connection Bluetooth file transfer interrupts the connection Wi Fi connections Problem Cause The New Network The Wi Fi radio is off Detected notification does not appear The handheld is out of automatically range of the network The handheld cannot The date on the connect to a secure site handheld is incorrect You cannot configure an Internet connection 88 Juno Series Handhelds User Guide Solution Move the devices closer
70. enables you to synchronize office applications on an office computer with the handheld A N CAUTION The available space on the handheld is small compared to an office computer To avoid accidentally synchronizing the handheld with a large amount of data on the office computer Trimble recommends that you either connect to the handheld without forming a partnership or that you limit the information types and amount of data that is synchronized A N CAUTION Synchronizing data is designed to keep the same data on both the office computer and the handheld Exercise care when resynchronizing applications after deleting data from one computer as resynchronizing will delete the same information from the other computer For more information see one of the following e Managing the connection using the Windows Mobile Device Center page 44 e Managing the connection using ActiveSync technology page 45 Juno Series Handhelds User Guide 43 Installing the Windows Mobile Device Center The Windows 7 and Windows Vista operating systems include a basic connectivity driver for Windows embedded handhelds This driver allows you to transfer files from the handheld to an office computer To install software onto a Windows embedded handheld you must install Windows Mobile Device Center onto an office computer To download the latest version from the Microsoft website go to www microsoft com windowsmobile devicecenter mspx Installing ActiveSync t
71. for a period of twelve 12 months from the date of purchase This limited warranty gives you specific legal rights you may have others which vary from state jurisdiction to state jurisdiction The above limited warranty does not apply to Fixes Minor Updates or Major Upgrades of the Software after expiration of the twelve 12 month limited warranty period all of which are provided AS IS and without warranty unless otherwise specified in writing by Trimble Because the Software is inherently complex and may not be completely free of nonconformities defects or errors you are advised to verify your work Trimble does not warrant that the Software will operate error free or uninterrupted will meet your needs or expectations or that all nonconformities can or will be corrected 2 2 Software Fixes During the limited warranty period described in section 2 1 above you will be entitled to receive such Fixes to the Product Software that Trimble releases and makes commercially available and for which it does not charge separately subject to the procedures for delivery to purchasers of Trimble products generally If you have purchased the Product from an authorized Trimble dealer rather than from Trimble directly Trimble may at its option forward the software Fix to the Trimble dealer for final distribution to you Minor Updates Major Upgrades new products or substantially new software releases as identified by Trimble are expressly exclu
72. formation they do not need to be visible to other devices To pair with a Bluetooth device k Make sure that the handheld and the Bluetooth device you want to pair with are within five meters of each other and that the Bluetooth radio in each device is turned on On the Juno series handheld tap amp Settings Bluetooth In the Devices tab tap Add new device The Bluetooth ana eeu handheld searches for other Bluetooth devices PAN Devices Mode and displays them in the list Tap Add new device to search for other Bluetooth devices Tap on a device to modify its settings If the device you are trying to connect is not displayed in the list ensure that the device is on and within range and then tap Refresh to search Fe for devices again Tap the name of the device you want to pair with and then tap Next on the right softkey In the Passcode field enter a passcode of between 1 and 16 characters If you are connecting to adevice with a keypad enter a passcode of your choice adevice without a keypad but you know that the device has a pre programmed passcode that will be exchanged enter that passcode on the Juno series handheld Note Trimble recommends that you enter only numbers as some devices do not support passcodes that include letters 6 le 8 10 Tap Next When prompted enter the same passcode on the other device On the handheld tap the name of other device The Partnership Set
73. giving access to functions such as email text messaging current time and Internet Explorer e customising which items appear on the Home screen and the order in which they appear To use the default Home screen view EE BO s l Tap amp Settings Home Appearance Items gt Appearance Checked itere appear on the Home screen 2 Tap the tems tab 3 Select the Windows Default check box Windows Default Date 4 Tap OK Wireless To customise the items which appear on the Home screen Getting Started 1 Tap Settings Home 2 Tap the Items tab 3 Select or clear the check boxes to show or hide the Home screen items 4 Use the Move Up and Move Down buttons to change where the selected item appears on the Home screen 5 Tap OK Set the time and date 1 Onthe Home screen tap the clock item or tap the BRC aa aise title bar and then on the pull down list tap the Alarms Time gt Alarms clock icon E The Clock amp Alarms screen appears 2 Tap the Time tab 3 Inthe Time Zone field select the required time zone from the drop down list Time 4 Inthe Date field tap the down arrow and then select the correct date Tip On the calendar which appears tap on the month or year to select the required value 5 Inthe Time field tap in turn the hour minute and second values and then tap the up or down arrows to set the correct time 34 Juno Series Handheld
74. grade WMDRM to access their content Microsoft software that includes WMDRM will ask for your consent prior to the upgrade If you decline an upgrade you will not be able to access content that requires the upgrade 1 10 Additional Software Services The Device Software may permit Trimble Microsoft their affiliates and or their designated agent to provide or make available to you Software updates supplements add on components or Internet based services components of the Software after the date you obtain your initial copy of the Software Supplemental Components 1 10 1 If Trimble provides or makes available to you Supplemental Components and no other end user license agreement terms are provided along with the Supplemental Components then the terms of this EULA shall apply 1 10 2 If Microsoft its affiliates and or its designated agent makes available Supplemental Components and no other end user license agreement terms are provided then the terms of this EULA shall apply except that the Microsoft entity or affiliate entity providing the Supplemental Component s shall be the licensor of the Supplemental Component s 1 10 3 Trimble Microsoft and each of their affiliates and or their designated agents reserve the right to discontinue any Internet based services provided to you or made available to you through the use of the Device Software 1 11 Links to Third Party Sites If the Software provides links to third party w
75. h screen or to scroll up or down Action Definition Tap Touch the screen once to open items and select options Tap and hold Tap and hold the stylus on an item to see a list of actions available for that item On the pop up menu that appears tap the action you want to perform Drag Hold the stylus on the screen and drag across the screen to select text and images Drag in a list to select multiple items Flick Flick the stylus or your finger over the screen to scroll a page or a list up or down If at any time the touch screen does not respond correctly to stylus taps or your finger realign it For more information see Screen page 36 Entering information Depending on the program you are using you can enter information in several ways as described below Input method Description Synchronizing Use Microsoft connection management software to exchange information between the handheld and an office computer For more information see Connecting to an office computer page 43 Typing Use the keyboard input panel to enter typed text by tapping keys on the on screen keyboard Writing Use the stylus like a pen to write directly on the screen Recording Create a stand alone recording or embed a recording into a note 30 Juno Series Handhelds User Guide Using the on screen keyboard OD aa The keyboard button automatically Textbox appears in the tile bar of any application To display the keyboard tap the keybo
76. h the Device as a single integrated product The Device Software installed in read only memory ROM of the Device may only be used as part of the Device into which it was embedded You may use the installation Software from a computer solely to download the Software to one Device In no event shall the installation Software be used to download the Software onto more than one Device A license for the Software may not be shared or used concurrently on different computers or Devices 1 2 Scope of License This EULA only gives you some rights to use the Software Trimble and Microsoft reserve all other rights Unless applicable law gives you more rights despite this limitation you may use the Software only as expressly permitted in this EULA In doing so you must comply with any technical limitations in the Software that allow you to use it only in certain ways Except as expressly provided in this EULA rights to access the Software on this Device do not give you any right to implement Microsoft patents or other Microsoft intellectual property in software or devices that access this device You may use remote access technologies in the software such as Remote Desktop Mobile to access the Software remotely from a computer or server You are responsible for obtaining any licenses required for use of the protocols to access other software 1 3 Proof of License If you acquired the Software on the Device or on a disc or other media a genuine Cer
77. handheld If version 4 5 or later of the ActiveSync technology is not installed on the office computer you can install it from the Juno Series Getting Started Disc You can also download the latest version from the Microsoft website In the ActiveSync technology on the office computer click File Connection Settings If you are using e the support module make sure that the Allow USB connections check box is selected from the drop down list e aBluetooth connection make sure that the correct port for Bluetooth is selected Then open the Bluetooth control on the handheld In the Devices tab tap the partnership and in the services list make sure that the ActiveSync check box is selected On the handheld tap Q Programs ActiveSync Menu Connections Make sure that the Synchronize all PCs using this connection check box is selected and that the correct option is selected If you are using the USB data cable use the USB to PC utility to change the connection method the handheld uses to connect to ActiveSync on the computer Tap Q Settings Connections USB to PC Utility Clear the Enable advanced network functionality check box The handheld stops using the default RNDIS method to connect to the ActiveSync technology Network connections Problem Cause Solution The Bluetooth If you change the proxy Make any changes to proxy settings before connecting to a connection with the settings of the c
78. handheld has Bluetooth and Wi Fi approval in most EU countries and the Juno SC and Juno SD are also compliant with GSM and UMTS conformity assessment requirements specified by the European Council Directive Radio and Telecommunication Terminal Equipment 1999 5 EC These requirements provide reasonable protection against harmful interference when the equipment is operated appropriately in a residential or commercial environment Australia and New Zealand This product conforms with the regulatory requirements of the Australian Communications and Media Authority ACMA EMC and Radiocommunications framework thus satisfying the requirements for C Tick Marking and sale within Australia and New Zealand Equipment that is additionally fitted with a wireless cellular modem satisfies the requirements for A Tick Marking and sale N in Australia and New Zealand The A Tick Marking is an indication to the user that the product is suitable for connection to a telecommunications network operated by a carrier or carriage service provider Taiwan Battery Recycling Requirements The product contains an internal Lithium ion battery RA Taiwanese regulations require that waste batteries are recycled l 5 ae EE a el Notice to Our European Union Customers For product recycling instructions and more information please go to www trimble com ev shtml and Electronic Equipment products that run on electrical power Call 31 497 53 24 30 and as
79. he field to improve the accuracy of your data 1 Ifyou are using TerraSync software to collect data use accuracy based logging 2 Use real time differential SBAS corrections For more information see page 74 3 Plan GNSS data collection around the times of the day when satellite geometry is best For more information refer to the TerraSync software Getting Started Guide on http www trimble com mappingGIS TerraSync aspx dtID technical_support Connecting to a real time differential correction source Use a real time differential GNSS DGNSS source to give you better accuracy as you collect data For more information about how real time differential GNSS works see Differential GNSS explained page 75 Juno Series Handhelds User Guide Using SBAS corrections The Juno series handheld has an integrated GNSS receiver that uses Satellite Based Augmentation Systems SBAS correction messages to improve the accuracy and integrity of GNSS data The SBAS tracking mode is Auto In Auto mode the receiver tracks or locks onto the most powerful satellite signal The GNSS receiver can track two SBAS satellites at the same time in Auto mode It uses corrections from only one SBAS satellite at a time but tracking two satellites can improve the availability of SBAS real time corrections For example if you are working in environments where obstacles may block the direct line of sight to the SBAS satellite there is less chance of signal loss if y
80. he handheld 3 Copy the files back to the memory card The files are encrypted as they are written to the memory card To remove encryption from files so they can be read by other devices 1 Insert the memory card in the handheld and then connect the handheld to an office computer see Connecting to an office computer page 43 2 Copy the encrypted files from the memory card to the office computer 3 To use the decrypted files on the handheld copy the files from the office computer to the handheld s main memory 4 To store the decrypted files on a memory card ensure that encryption is not enabled on the handheld and then copy the decrypted files from the office computer to the memory card Juno Series Handhelds User Guide 25 Installing and removing the SIM card A N CAUTION The SIM card and its contents can be easily damaged by scratches or bending Use caution when inserting or removing the card A N CAUTION The presence of any dust or moisture in the SIM card slot may adversely affect the device and void your Trimble warranty To prevent dust or moisture entering the SIM card slot When inserting or removing a SIM card place the handheld on a dust free indoor surface A N CAUTION Static electricity can harm electronic components inside the handheld To prevent static damage discharge static electricity from your body before you touch any of the electronic components inside your device such as a memory modu
81. he rover receiver are corrected with DGNSS either in real time or during postprocessing Real time DGNSS In real time DGNSS the base station calculates and broadcasts the error for each satellite as each measurement is received enabling you to apply corrections while in the field and collect accurate GNSS data DGNSS corrections are available from a Juno Series Handhelds User Guide 75 76 variety of public and commercial sources They can be generated and broadcast in real time by privately or self owned GNSS base stations or by a wide range of government agencies Real time DGNSS corrections can be used on the Juno series handheld from Satellite Based Augmentation Systems SBAS such as WAAS in the US and EGNOS in Europe SBAS uses multiple base stations to calculate the DGNSS corrections that are then delivered to the user from a Geostationary satellite Factors that affect real time DGNSS accuracy include how often the corrections are updated how far you are from the base station and whether the coordinate system used by the correction source matches the coordinate system used by the GNSS receiver Postprocessed DGNSS In postprocessed DGNSS the collected GNSS data is transferred to an office computer and measurements from the base station are downloaded You can postprocess GNSS data collected with Trimble GNSS field software using e the GPS Pathfinder Office software e the Trimble GPS Analyst extension for Esri ArcGIS
82. he standard operating positions adopted by the FCC that test the device for SAR while it is transmitting at the highest certified power level in all tested frequency bands The FCC has granted an Equipment Authorization for this device on the basis that all reported SAR levels have been evaluated to be compliant with the FCC RF exposure guidelines SAR information on this device is on file with the FCC and can be found under the Display Grant section of http www fcc gov oet fccid after searching on FCC ID JUP96410 model TNJ31 or JUP96420 phone model TNJ32 For documentation relating to the SAR values of the Juno series handhelds go to the Trimble Support website at www trimble com support shtml select the required Juno series handheld Juno 3B or Juno 3D select the Technical Support tab and then click Compliance Information l In the United States and Canada the SAR limit for mobile phones used by the public is 1 6 watts kg W kg averaged over one gram of tissue The standard incorporates a substantial margin of safety 8 Juno Series Handhelds User Guide AC adaptor safety A To charge the handhelds battery use the international adaptor kit provided with the Juno series handheld see Powering the handheld page 16 WARNING To use AC adaptors safely Use only the AC adaptor intended for the Juno series handheld Using any other AC adaptor can damage the handheld and may void your warranty Do not use the AC adap
83. his connection check box is selected and that the correct option is selected If you are using the USB data cable use the USB to PC utility to change the connection method the handheld uses to connect to the Windows Mobile Device Center on the computer Tap QJ Settings Connections USB to PC Utility Clear the Enable advanced network functionality check box The handheld stops using the default RNDIS method to connect to the Windows Mobile Device Center ActiveSync technology Problem Cause Solution ActiveSync The connection is not Disconnect the USB cable from the computer and then technology will not connect to the handheld initiated automatically ActiveSync does not recognize the Juno series handheld handheld An incompatible version of ActiveSync technology is installed The connection is not enabled in ActiveSync on the computer The connection is not enabled in ActiveSync on the handheld The handheld connection settings conflict with network settings or VPN client software reconnect the handheld to the computer Alternatively in the ActiveSync technology on the office computer select File Connection Settings and then tap Connect Restart the office computer Disconnect the USB cable from the handheld reset it see Resetting the handheld page 22 and then reconnect the handheld to the computer ActiveSync version 4 5 and later is compatible with the Juno series handheld
84. how to e get started with the Juno series handheld e use the Windows Embedded Handheld 6 5 Professional operating system e use the cellular modem in the Juno 3D handheld e synchronize information between a computer and the handheld e exchange information between the handheld and other devices connect to the Internet or to a computer network e use the handhelds integrated GNSS receiver e use the handhelds integrated camera Even if you have used other Global Navigation Satellite System GNSS or Global Positioning System GPS products before Trimble recommends that you spend some time reading this guide to learn about the special features of the product Juno Series Handhelds User Guide 11 Collecting GNSS data To collect GNSS data with the Juno series handheld you must install GNSS field software onto the handheld You can use the Juno series handheld with compatible Mapping and GIS field and office software For version numbers and a complete list see the Product Compatibility List on www trimble com For more information on using the integrated GNSS receiver see Using the GNSS receiver page 72 What s in the box When you unpack the Juno series handheld check that you have received all the components Mini USB cable Wrist lanyad Universal power Stylus Stylus tether supply Inspect all contents for visible damage scratches dents and if any components appear damaged notify the shipping carrier
85. ible to read encrypted files on the storage card with any other device including another Juno series handheld or an office computer CAUTION If you reset the handheld to the factory default settings the encryption key is deleted and the handheld is no longer able to read any encrypted files on a memory card This means that any files you have encrypted are permanently locked and unreadable by any device To avoid being unable to read previously encrypted files Trimble recommends that you use another device such as an office computer as the primary location for storing important data and to control the encryption of important files To enable encryption of files as they are written to a memory card l Tap Settings System Encryption 2 Select the Encrypt files when placed on a storage card check box Note Encrypted files appear as ordinary files on the handheld they were encrypted on If the memory card is inserted in another device the files appear with a menc file extension and cannot be opened To disable encryption clear the Encrypt files when placed on a storage card check box Note Disabling encryption does not remove encryption from any existing files on the memory card but ensures that new files placed onto the memory card are not encrypted To encrypt files that are already stored on a memory card 1 Copy the files to the handheld s internal memory or to an office computer 2 Ensure encryption is enabled on t
86. ically transfer data from the TerraSync software differentially correct the data and then export it to a GIS For more information refer to the GPS Pathfinder Office Software Help Managing the connection using ActiveSync technology 1 Connect the handheld to the computer see page 44 The Synchronization Setup Wizard appears Note If the connection is not made automatically check that the connection is enabled in the ActiveSync technology and on the handheld For more information see Troubleshooting page 83 2 Doone of the following To synchronize files and data between the handheld and a computer click Next and then follow the instructions in the Synchronization Setup Wizard To transfer data between the handheld and the computer without synchronizing the devices click Cancel to close the wizard 3 The Microsoft ActiveSync window displays the message Connected Juno Series Handhelds User Guide 45 4 To transfer files between the computer and the handheld click Explore A Windows Explorer type window appears displaying files stored on the handheld Copy and paste files to other locations on the computer or from the computer to the handheld 5 To install software onto the handheld see Installing software onto the handheld page 46 6 To uninstall software from the handheld select Add Remove Programs from the Tools menu Clear the check box beside the program you want to remove and then click OK For mor
87. ice Software and use it accordance with this EULA including any additional end user license agreement terms accompanying the upgrade Device Software 1 15 If any software component s is provided by Trimble separate from the Device on CD ROM disc s or via web download or other means and labeled For Upgrade Purposes Only you may i install and use one 1 copy of such component s on the computer s you use to exchange data with the Device as a replacement copy for the existing Companion CD component s 1 16 Copyright All title and copyrights in and to the Software including but not limited to any images photographs animations video audio music text and applets incorporated into the Software the accompanying printed materials and any copies of the Software are owned by Trimble or Microsoft including Microsoft Corporation and their respective suppliers You may not copy the printed materials accompanying the Software All title and intellectual property rights in and to the content which may be accessed through use of the Software is the property of the respective content owner and may be protected by applicable copyright or other intellectual property laws and treaties This EULA grants you no rights to use such content You shall not remove cover or alter any of Trimble s patent copyright or trademark notices placed upon embedded in or displayed by the Software or on its packaging and related materials All rights not s
88. ient initiates the connection and also provides information to the host device The services used by a Juno series handheld when connecting as a Bluetooth client are Service Description Dialup Networking Connects the handheld to a cellular phone or modem for dial up DUN network or Internet access Personal Area Connects to Bluetooth network access points or phones that support the Networking PAN Personal Area Network Network Access PAN profile Serial Port Emulates an RS 232 serial COM port on the handheld ActiveSync Enables an ActiveSync connection to a computer Input Device HID Connects the handheld to a physical input device such as a keyboard Wireless Stereo Connects to Bluetooth A2DP Advanced Audio Distribution Profile headphones A client can connect to a number of different services provided by different hosts The number of active connections at any one time affects the speed of the connections Figure 1 4 shows the handheld connected to different types of host devices using Bluetooth wireless technology Bluetooth headset Wireless keyboard Or Input device Laser rangefinder barcode scanner Figure 1 4 Juno series handheld Bluetooth client connections Juno Series Handhelds User Guide 55 56 In Figure 1 4 the dashed arrows indicate the client device that is the Juno series handheld connecting to host devices The Bluetooth profile or service used for the connection is shown between the
89. in low temperatures Replace the battery Solution Tap QJ Settings System Backlight to view the Backlight control and make sure that e the Turn on backlight when a button is pressed or the screen is tapped check box is selected e the brightness is not set to Dark in the Brightness tab Tap the screen or press a button Tap Q Settings System Backlight to view the Backlight control and then adjust the slider in the Brightness tab Solution Realign the screen see page 36 To unlock the touch screen tap Unlock in the menu bar of the Home screen The handheld has locked up The handheld is turned off The battery is flat The handheld has locked up A voice call is active The screen is blank Reset the handheld see Resetting the handheld page 22 Press the Power button to turn on the handheld Recharge the battery see page 36 Reset the handheld see Resetting the handheld page 22 The screen will become active and visible again when the call is ended see Voice calls page 40 84 Juno Series Handhelds User Guide Problem Cause Solution The screen is hard to The backlight level needs Open the Backlight control and then adjust the backlight see to be adjusted level see Backlight page 37 The backlight is off Tap the screen to turn on the backlight You are unable to see parts Some applications are designed for portrait orientation of an application windows only To
90. integrated cellular modem you can use the handheld s Bluetooth radio to connect to a Bluetooth enabled cellular phone and then connect to the Internet Use this type of connection to access a background map server or for Internet and email access Note Some cellular phones support the Bluetooth PAN Personal Area Networking service as well as the Bluetooth DUN Dialup Networking service Because DUN connections are more common this section assumes you are making a dialup network connection with the Bluetooth enabled phone For information on setting up a PAN service see Connecting to the Internet through a Bluetooth enabled phone using the Bluetooth PAN profile page 63 To connect to a Bluetooth enabled phone using a Bluetooth DUN Dialup Networking connection you must 1 Connect the Juno series handheld to a Bluetooth enabled phone and then configure the connection to the dialup network 2 Connect to the Internet using the dialup network 3 Configure the software to use the connection For example you must configure the GNSS field software to use map data received from the Internet source or you must set up the Messaging application to send and receive email using the connection Note Before you begin the steps below Trimble recommends that you confirm that the phone can access the Internet directly Ifnecessary contact the cellular phone provider and confirm whether you must enter a user name password and domain de
91. ives no express warranties guarantees or conditions regarding the Microsoft Software Any warranties you receive regarding the Device or the Software do not originate from and are not binding on Microsoft or its affiliates When allowed by your local laws Trimble and Microsoft exclude implied warranties of merchantability fitness for a particular purpose and non infringement LIABILITY LIMITATIONS You can recover from Microsoft and its affiliates only direct damages up to fifty U S Dollars U S 50 00 or equivalent in local currency You cannot recover any other damages including consequential lost profits special indirect or incidental damages This limitation applies to Anything related to the Software services content including code on third party internet sites or third party programs and claims for breach of contract breach of warranty guarantee or condition strict liability negligence or other tort to the extent permitted by applicable law It also applies even if Microsoft should have been aware of the possibility of the damages The above limitation may not apply to you because your country may not allow the exclusion or limitation of incidental consequential or other damages 2 LIMITED WARRANTY FOR TRIMBLE PRODUCT SOFTWARE 2 1 Limited Warranty Trimble warrants that the Software exclusive of the Microsoft Software will perform substantially in accordance with the accompanying written materials
92. k for the WEEE Associate Or mail a request for recycling instructions to Trimble Europe BV c o Menlo Worldwide Logistics Meerheide 45 5521 DZ Eersel NL Recycling in Europe To recycle Trimble WEEE Waste Electrical H Juno Series Handhelds User Guide 6 Safety information The Trimble Juno series handhelds contain a Bluetooth radio and a Wi Fi radio The Juno 3D handheld also contains a cellular modem In some situations you may be required to turn off the radios For example aviation authority regulations restrict the use of radios on board aircraft Turning off the integrated radios To prevent the handheld from emitting radio signals do one of the following e To turn off the handheld press and hold the Power button to display the Power menu then tap Shutdown To turn off the Bluetooth Wi Fi and cellular modem radios a Tap the title bar on the Home or Start screen and then on the pull down list tap the f or Ej icon b In the Connectivity or the Phone dialog select Wireless Manager c Tap All to turn off all radios The status fields below the Wi Fi Bluetooth and Phone buttons change to Off Deactivating the integrated radios The Juno series handheld is shipped with Wi Fi and Bluetooth wireless technology activated You may need to deactivate the Wi Fi and or Bluetooth radio in the handheld if the country in which you are working does not approve the use of Wi Fi and or Bluetooth wirele
93. le You can do so by touching an unpainted metal surface To insert or remove a SIM card 1 Turn off the handheld See Turning on and turning off the handheld page 20 2 Place the handheld face down on a dust free indoor surface 3 Remove the battery cover door and then remove the battery See Inserting and removing the battery page 18 4 Insert or remove the SIM card as shown with the gold contacts face down 5 Replace the battery and the battery cover door 26 Juno Series Handhelds User Guide Using the Windows Embedded Handheld operating system The Juno series handhelds are powered by the Windows Embedded Handheld 6 5 Professional operating system The main parts of the Home screen and the Start screen are shown below Home screen Provides access to the key functions on your handheld Scroll and tap any item to open it Start button Tap to open the Start screen where you can access programs and system controls Start screen Tap any item on the menu to open it Lock device Tap to lock the screen Once locked you have multiple points of unlock entry depending ma E l i getting started phone voicemail PM s No SIM text e mail ee X g 332 Title bar Contains status icons for important system functions 10 31 11 Tile bar Contains touchable tiles providing access to applications menus and notifications tx Internet Explorer _ settings
94. le GPScorrect extension is installed the extension GPScorrect extension automatically configures the ArcPad software to use the integrated GNSS receiver on COM4 using the Trimble GPScorrect protocol e To connect to GNSS tap the GPS button w and then tap Yes e To configure a real time DGNSS source or to view status information run the GPScorrect extension To do this tap the GPScorrect button in the Trimble toolbar ArcPad without the 10 In ArcPad tap the GPS drop down menu GPScorrect extension and then select GPS Preferences from the drop down menu Tap the GPS tab 11 In the Protocol field select NMEA 0183 12 In the Port field select COM4 13 Tap OK 14 Tap the GPS button w and then tap Yes NMEA application Configure the software to connect to GNSS on COM4 and then use the Connect or Activate GPS command Ensuring the accuracy of your GNSS data The Juno series handheld has an integrated GNSS receiver that provides accurate positioning with real time differential correction between two and five meters or postprocessed accuracy between one and three meters The accuracy that you obtain from your Juno series handheld is affected by a number of factors including whether the data is differentially corrected in real time or after data collection and the availability of GPS satellites in the sky when you collect the data The list below identifies the most important settings and techniques that you can use in t
95. m signal Cellular modem is turned off No cellular service Searching for cellular modem service Data is transferring using the cellular modem No SIM card UMTS network is available UMTS network is connecting UMTS connection is active 3G network is available Analog network is available EDGE network is available EDGE network is connecting EDGE connection is active eo ESI ad Cee Ee ea ES 2 A a Es 3 RE GPRS network is available 28 Juno Series Handhelds User Guide Icon By GPRS network is connecting GPSR connection is active HSDPA network is available HSDPA network is connecting i HSDPA connection is active The network and modem status icons on the title bar of the Home screen or the Start screen show the status of each radio Tap the title bar and then on the pull down list tap the jor fj icon In the Connectivity or Phone dialog select Wireless Manager and turn on or turn off the radio Speaker status indicators Icon Description Fa Speaker is on Speaker is off The speaker status icon on the title bar of the Home screen or the Start screen shows the status of the speaker Tap the title bar and then on the pull down list tap the fg icon to adjust the volume and to turn the speaker on or off Pre installed programs Programs that are pre installed on the Juno series handheld are as follows Program Function ActiveSync Synchronize information between the handheld and a computer _
96. mary 1 Inthe GNSS Settings form set the NMEA Output ce field to On ee 2 Tap the Setup button that appears next tothe Pat Bits NMEA Output field The NMEA Output Settings Stop Bits appears Parity 3 Configure the NMEA message output settings CAUTION NMEA standard dictates that a baud rate of 4800bps should be used for NMEA messages Depending on the number of satellites being tracked the amount of data being captured at once may often cause the 4800 bit limit to be exceeded Buffers have been added which allow the data to be stored and then sent when it is able to This avoids data corruption but may delay delivery of data and positions may take as long as 8 seconds to be sent from the time at which they were originally recorded If you need 4800bps output Trimble suggests that you try to minimise the effect by reducing the amount of NMEA data being sent for example by dropping out NMEA sentences from the NMEA stream 4 Tap Done For more information refer to the GPS Controller Help Juno Series Handhelds User Guide 77 Using the camera The Juno series handheld contains an integrated digital camera which you can use to capture pictures or video Parts of the camera Flash Juno 3D only Preview window Camera setting controls Camera button Figure 1 5 Juno series handheld camera controls Starting the camera application To start the camera do one of the following 1 Press the
97. may be lost Note Perform a hard reset only if a soft reset does not resolve the problem To perform a hard reset press and hold the Power button and use the tip of the stylus to lightly press the Reset button Resetting to factory default settings Reset the handheld to factory default settings to restore the handheld to its original state or only if a soft reset and then a hard reset does not resolve the problem Juno Series Handhelds User Guide A N CAUTION Resetting the handheld to factory default settings erases all data installed applications and settings stored in the handheld except for any data or applications that were pre installed on the handheld or are stored on a memory card It does not change the language of the operating system used on the handheld A N CAUTION If you have encrypted files on a memory card and you reset the handheld to factory default settings the encryption key on the handheld is deleted This means that any files you have encrypted on a memory card are permanently locked and unreadable by any device For more information see Encrypting files on memory cards page 25 9 Tip To quickly and easily restore data deleted by performing a factory reset synchronize the handheld with a computer before you reset the handheld to the factory default settings Once the handheld is reset resynchronize the handheld with the computer To reset the handheld to the factory default settings 1 Press the P
98. n Buttons f Yig 5 03 Up D lt Program Buttons gt Up D 1 Tap the Program Buttons tab 1 Select a button 2 Tap a button in the list to select it es ae 3 From the Assign a program drop down list select EIE lt Left Softkey gt the action you want to occur when you press the Button 2 lt Right Softkey gt button or tap the softkey fa Button 3 Camera 4 Tap OK 2 Assign a program lt Left Softkey gt Home Use the Home settings to change the display theme that controls the appearance of the Home screen and to customize how items appear on the Home screen Appearance You can use a theme to customize the background picture on the Home screen the color of the title and tile bars menus and messages To change the display theme l Tap Settings Home ERN SAKELA 2 Tap the Appearance tab Items Appearance gt Items Select a theme for your device 3 Do one of the following Classic Blue To use a predefined theme select it from the love green list Isaac Mizrahi purple To select the picture that you want to display in the Home screen background select the Use this picture as the background check box Then tap Browse to search for a file on the handheld 4 Tap OK Rock and Republic black Juno Series Handhelds User Guide 33 Items You can choose between e the Windows default Home screen view which allows you to flick through the list of entries
99. nds that you click Send and then click any subsequent links that are used to obtain additional information Trimble can access the report that is sent to Microsoft and use it to improve the Juno series handheld handheld Juno Series Handhelds User Guide Getting started This section describes the main features of the Juno series handheld and provides the information you need to get up and running with the handheld Parts of the Juno series handheld The following pages show the main parts of the handheld D Power button Earpiece LED surround External GPS antenna port r lt y Pictures amp Videos Alari E R Pa Soft keys Camera button Reset button Microphone Start Figure 1 1 Juno series handheld Juno 3B and Juno 3D front view The function of each key is described below Key Description Start Press to display the Windows Embedded Handheld Start screen Camera Press to start the Camera application see Using the camera page 78 Soft keys By default these keys perform the same action as the left and right softkeys in the menu bar Alternatively program these keys to perform a selected action To program the keys use the Buttons control see Buttons page 32 X Tip To lock the screen and handheld keys without turning off the handheld use the device lock option see Device lock page 35 Juno Series Handhelds User Guide 15 Stylus and wrist lanyard tethe
100. necting to save power can cost time Turning on and turning off the handheld If the screen on the handheld is blank the handheld is in Suspend mode or has been shut down To turn on the handheld press the Power key briefly less than one second To turn off the handheld or put the handheld into Suspend mode press the Power key briefly less than one second The handheld is placed in a very low power state but the Bluetooth and wireless cellular modem radios may remain active see Suspend mode page 21 To completely shut down the handheld press the Power button until the Power menu appears and then tap Shutdown All running applications are shut down and the handheld is completely turned off Juno Series Handhelds User Guide The options available from the Power menu are as follows Button Used to Power Settings quickly access the Power Settings menus Backlight Settings quickly access the Backlight Settings menu Shutdown put the handheld into Shutdown mode Applications are shut down and the handheld is completely turned off Reset restart the handheld If the handheld stops responding to the stylus or if it does not respond when you press any of the keypad buttons try a soft reset For more information see Resetting the handheld page 22 access the Align Screen Sequence You can also press the left application 7 key to access the Align Screen Sequence If at any time the touch screen does not respond correctly to st
101. nergy emitted by wireless devices such as mobile phones However the use of wireless radios may be restricted in some situations or environments such as on aircraft If you are unsure of restrictions you are encouraged to ask for authorization before turning on the wireless radios Exposure to radio frequency radiation from cellular wireless transmitters Juno series handheld equipment uses cellular wireless radios that have been designed and manufactured to meet safety requirements for limiting exposure to radio waves When used in accordance with the instructions set forth in this manual the equipment has been independently verified to not exceed the emission limits for safe exposure to radio frequency RF energy as specified by the Federal Communications Commission of the U S Government in 47 CFR 2 1093 These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population The guidelines are based on standards that were developed by independent scientific organization through periodic and thorough evaluation of scientific studies The standards include a substantial safety margin designed to assure the safety of all persons regardless of age and health The exposure standard for all wireless devices employs a unit of measurement known as the Specific Absorption Rate or SAR the SAR limit set by the FCC is 1 6W kg Tests for SAR on the Juno series handhelds have been undertaken using t
102. nstalled on the computer it is automatically transferred to the handheld Note Ifa memory card is inserted in the handheld the card appears as an installation location option Trimble recommends that you install software to the handhelds storage memory not to a memory card If you install software to a card and then remove the card from the handheld the software will not be available for use 5 If prompted after installation perform a soft reset of the handheld see page 22 Juno Series Handhelds User Guide Using the integrated radios to connect to other devices The Juno series handheld includes an integrated Wi Fi radio and an integrated Bluetooth radio and provides a number of options for connecting to networks and other devices In addition the Juno 3D handheld includes an integrated cellular modem for sending and receiving data and supports voice calls and text messaging To use Wi Fi the Bluetooth radio or the cellular modem you need to turn it on see Turning on and turning off the integrated radios below Using a data connection from your local cellular provider the Juno 3D handheld s integrated cellular modem can be used to connect to the Internet to receive real time corrections from a VRS network send and receive messages including email SMS or instant messages or to send and receive files and other data to and from the office directly in the field You can also use the handhelds integrated Wi Fi radio
103. nstructions accompanying this Software and install one 1 copy of the Software on one 1 Device presently containing a licensed copy of a predecessor version of the Software unless this EULA indicates that this Software copy has been licensed for installation on multiple Devices NO REPRESENTATION OR WARRANTY IS MADE BY TRIMBLE OR MICROSOFT WITH RESPECT TO THE COMPATIBILITY OF THIS SOFTWARE WITH ANY DEVICE OR ANY OTHER EXISTING SOFTWARE OR DATA OF ANY KIND CONTAINED ON SUCH DEVICES AND NEITHER TRIMBLE OR MICROSOFT SHALL BE RESPONSIBLE IN ANY REGARD WITH RESPECT TO ANY LOSS CORRUPTION MODIFICATION OR INACCESSIBILITY OF ANY DATA APPLICATIONS OR OTHER SOFTWARE RESULTING FROM THE INSTALLATION OF THE SOFTWARE ON ANY DEVICE 1 8 Internet Based Services Components Microsoft provides Internet based services with the software Microsoft may change or cancel them at any time The Microsoft Software features described below connect to Microsoft or service provider computer systems over the Internet In some cases you will not receive a separate notice when they connect You may switch off some of these features or not use them For more information about these features visit http go microsoft com fwlink LinkId 81931 By using these features you consent to the transmission of this information Microsoft does not use the information to identify or contact you You may not use these services in any way that could harm them or impair anyone elses u
104. nterference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and the receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Changes and modifications not expressly approved by the manufacturer or registrant of this equipment can void your authority to operate this equipment under Federal Communications Commission rules The radio devices used by this equipment are classified under 47 CFR 15 247 as spread spectrum transmitter equipment In accordance with OET Bulletin 65 supplement C Edition 1 01 the device operates at low power levels where there is a high likelihood of compliance with the RF exposure standards is categorically excluded from routine environmental evaluation as set forth in CFR 47 section 2 1093 The radiated output power of this equipment produces a calculated SAR that is significantly below the FCC radio frequency exposure limits Equipment that is additionally fitted with a wireless cellular modem is certified to satisfy US requirements as stipulated in 47 CFR Parts 22 and 24 The external antenna connector provided in this device is for GPS antennas only
105. ome screen changes to e 10 the Power LED on the handheld flashes red and the Main battery low message appears on the handheld e 5 the Main battery very low message appears on the handheld Trimble recommends that you recharge the battery when any of these indicators appear Juno Series Handhelds User Guide 19 20 Conserving power Although the handheld battery can operate for a full day without recharging Trimble recommends that you do the following to reduce power consumption e Set the handheld to automatically turn off when idle For more information see Suspend mode page 21 e Set the backlight to automatically turn off when the handheld is idle for a specified time For more information see Backlight page 37 e Reduce the brightness setting for the backlight For more information see Backlight page 37 e Turn off the integrated Bluetooth or Wi Fi radios or cellular modem whenever you are not using them For more information see Turning on and turning off the integrated radios page 48 e Disconnect from the integrated GNSS receiver when GNSS data is not required using the applications Disconnect or Deactivate GNSS command When you disconnect from GNSS the integrated GNSS receiver switches off and stops drawing power Note Do not disconnect from GNSS if you will be reconnecting within about five minutes A GNSS application can take up to 30 seconds to reactivate the integrated GNSS receiver so discon
106. orming Product with new equivalent to new or reconditioned parts or Product OR refund the Product purchase price paid by you at Trimble s option upon your return of the Product in accordance with Trimble s product return procedures then in effect How to Obtain Warranty Service To obtain warranty service for the Product please contact your Trimble dealer Alternatively you may contact Trimble to request warranty service at 1 408 481 6940 24 hours a day or email your request to trimble_support trimble com Please be prepared to provide your name address and telephone numbers proof of purchase acopy of this Trimble warranty a description of the nonconforming Product including the model number and an explanation of the problem The customer service representative may need additional information from you depending on the nature of the problem Warranty Exclusions and Disclaimer This Product limited warranty shall only apply in the event and to the extent that i the Product is properly and correctly installed configured interfaced maintained stored and operated in accordance with Trimble s applicable operator s manual and specifications and ii the Product is not modified or misused This Product limited warranty shall not apply to and Trimble shall not be responsible for defects or performance problems resulting from i the combination or utilization of the Product with hardware or software produ
107. ou are tracking more than one SBAS satellite The receiver tracks SBAS satellites according to your geographical location e Wide Area Augmentation System WAAS satellites are tracked in the Continental United States including Alaska and parts of Canada and Mexico e European Geostationary Navigation Overlay Service EGNOS satellites are tracked in Europe e MTSAT Satellite based Augmentation System MSAS satellites are tracked in Japan Note If you have other Trimble GNSS field software installed configure real time correction settings in that application instead of the GPS Controller software For further information refer to the Trimble field software documentation on www trimble com e For the TerraSync software go to http www trimble com mappingGIS TerraSync aspx dtID technical_support e For the GPS Controller software go to http www trimble com support_trl asp Nav Collection 32054 Differential GNSS explained Use differential GNSS to correct errors in your collected data Differential GNSS DGNSS requires one or more additional receivers called base stations or reference stations which are located at known points Data collected at the base stations is used to determine GNSS measurement errors and compute corrections to these errors An unlimited number of mobile GNSS receivers called rovers collect GNSS data at unknown locations within the vicinity of the base station Errors common at both the base station and t
108. ou start the application if a current connection is not already established 52 Juno Series Handhelds User Guide Connecting to a Wi Fi access point To connect to a Wi Fi access point you must l 2 Set up the Wi Fi connection Connect to the Wi Fi network or access point Note If you have installed a personal certificate on the handheld you do not need to set up the wireless connection manually as described in Step 1 To connect to the network or access point go to Step 2 Connecting to the network or access point Step 1 Setting up the Wi Fi connection l 2 a Make sure that the Juno series handheld s Wi Fi radio is enabled see page 48 Tap amp Settings Connections Wireless Manager Tap Menu and then select Wi Fi Settings Configure Wireless Network Any networks that you have already configured are displayed in the list of preferred networks To add a new network tap Add New To change Sonnac the settings for an existing network tap the M This is a hidden network network Network name This ts a device to device ad hoc Enter the name of the network and other connection details and then tap Next Do one of the following To use authentication select the authentication method from the Authentication list To use data encryption select an encryption method from the Data Encryption list To automatically use a network key select the check box for The key is automatic
109. ower button until the Power menu appears and then tap Shutdown 2 Press and hold the two soft keys on the handheld 3 While holding the soft keys press and hold the Power key until the Hive Clean prompt appears 4 Follow the on screen instructions to continue the factory reset Storing data The handheld has two types of memory Memory CER AET Storage lt Main gt Storage e Storage memory is similar to the hard disk in a Program computer and is used for storing programs and ees ee ee data 613MB Inuse 34 04MB 1512 38 ree 162 58 MB e Program memory is similar to the RAM ina computer and is used for running programs You cannot use it to save data To check the memory capacity on the handheld tap Settings System Memory The Storage and Program columns show the current memory available Find large files using storage memory and the memory that is already in use Pre installed documents and program files are not affected by power loss or resetting However you can still lose data if you accidentally delete or overwrite it A N CAUTION The Windows Embedded Handheld 6 5 Professional operating system does not include a Recycle Bin When you delete files from the handheld they are deleted permanently Trimble recommends that you regularly copy important data to an office computer For more information see Connecting to an office computer page 43 Juno Series Handhelds User Guide 23 24
110. pe it with a clean dry cloth Storage If you are not going to use the handheld for three months or more Trimble recommends that you do not leave the handheld in Suspend mode see page 21 Instead partially charge the battery and then turn off the handheld Juno Series Handhelds User Guide 13 14 To prepare the Juno series handheld for storage 1 Transfer any data that you need to an office computer 2 Charge the battery to approximately 30 3 Press and hold the Power button to display the Power menu then tap Shutdown 4 Store the handheld at room temperature To use the Juno series handheld after storage 1 Press the Power key to turn on the handheld 2 Recharge the battery see Charging the battery page 18 Technical assistance Go to the Juno series handheld technical support page on the Trimble website www trimble com mappingGIS juno3d aspx or www trimble com mappingGIS juno3b aspx for the latest support information including FAQs e support notes detailing support issues e documentation the latest files available for download Additional help If you still cannot find the information that you need contact your Trimble reseller Windows error reporting If for any reason a Microsoft Windows Error Reporting dialog appears indicating that the handheld or Trimble field software has encountered a problem and needs to close you are prompted to send an error report to Microsoft Trimble recomme
111. pecifically granted in this EULA are reserved by Trimble Microsoft and their respective suppliers 1 17 US Government Restricted Rights The Software is provided with RESTRICTED RIGHTS Use duplication or disclosure by the United States Government is subject to restrictions as set forth in this EULA 4 Juno Series Handhelds User Guide and as provided in DFARS 227 7202 1 a and 227 7202 3 a 1995 DFARS 252 227 7013 c 1 ii OCT 1988 FAR 12 212 a 1995 FAR 52 227 19 or FAR 52 227 14 ALT II as applicable 1 18 Microsoft has contractually obligated Trimble to include the following terms in this EULA Product Support The Product support for the Software is not provided by Microsoft or its affiliates or subsidiaries For product support please refer to the Trimble support number provided in the documentation for the Device Not fault tolerant The Software is not fault tolerant Trimble installed the Software on the Device and is responsible for how it operates on the Device Restricted user The Microsoft Software was designed for systems that do not require fail safe performance You may not use the Microsoft Software in any device or system in which a malfunction of the Microsoft Software would result in foreseeable risk of injury or death to any person This includes operation of nuclear facilities aircraft navigation or communication systems and air traffic control No warranties for the software Microsoft g
112. r Stylus Mini USB socket Power connector Figure 1 2 Juno series handheld bottom view Camera flash Juno 3D only Camera lens Speaker Back cover lock Figure 1 3 Juno series handheld back view Powering the handheld The Juno series handheld contains a rechargeable Lithium ion battery Note Charge the battery completely before using the handheld for the first time If the battery has been stored for longer than six months charge it before use Trimble recommends charging the battery for four hours to recharge it fully Note Cold temperatures or using Bluetooth wireless technology or Wi Fi connectivity or using the cellular modem consumes additional battery power and so shortens battery life between charges 16 Juno Series Handhelds User Guide AC adaptor safety WARNING To use AC adaptors safely Use only the AC adaptor intended for the Juno series handheld handheld Using any other AC adaptor can damage the handheld and may void your warranty Do not use the AC adaptor with any other product Make certain that the input voltage on the adaptor matches the voltage and frequency in your location Make certain that the adaptor has prongs compatible with your outlets Do not use the AC adaptor in wet outdoor areas it is designed for indoor use only Unplug the AC adaptor from power when not in use Do not short the output connector Be aware that there are no user serviceabl
113. ries Handhelds User Guide 47 48 Use the Radio Activation Manager software to deactivate the integrated Wi Fi and or Bluetooth radio or to reactivate the radios if they have been deactivated The Radio Activation Manager software runs on an office computer The latest copy of the software is available for download from the Trimble website Go to www trimble com support shtml click the link for your receiver type Juno 3B or Juno 3D click Downloads click Juno series and then click Radio Activation Manager Turning on and turning off the integrated radios You can use the Wireless Manager application to turn on and turn off the Juno series handheld s Wi Fi or Bluetooth radios or the Juno 3D handheld s cellular modem see Using the Wireless Manager below You can also turn on or turn off the Bluetooth radio from within the Bluetooth application see Turning on and turning off the Bluetooth radio from within the Bluetooth application page 50 To make the Juno series handheld visible to other Bluetooth enabled devices and enable them to connect see page 51 Using the Wireless Manager You can use the Wireless Manager application to turn on and turn off the Juno series handheld s Wi Fi radio and or Bluetooth radio and the Juno 3D handhelds cellular modem You can turn on and turn off any of the radios at the same time or control each individually To open the Wireless Manager do one of the following e Tap the title bar
114. s User Guide Device lock Tap the Device Lock icon gj on the Start screen to lock the screen and keypad while the handheld remains turned on Once the handheld is locked the screen and most of the keys do not respond until the handheld is unlocked The exception is the Power key which always respond when pressed Communication with external devices such as a GNSS receiver or external sensors used by GNSS field software is not interrupted by locking the handheld This means that you can keep using the GNSS field software when the handheld is locked For example you could lock the device so that you can safely transport it between features while keeping the software connected to the GNSS receiver so that you can continue recording GNSS positions The lock screen provides multiple unlock sliders for different applications when there are new notifications For example if a new email has arrived an email unlock slider takes you straight to the email To unlock the device slide the Unlock icon for the required application to take you straight to that application You can help to keep your data secure by requiring a password each time the handheld is turned on Tap Settings Lock to set a password or to change password settings Power To open the Power control do one of the following e Tap the title bar of the Home screen or the Start screen and then tap a e Tap Settings Power Tap the Battery tab to check the
115. same password and then accept the connection e On the Juno series handheld tap Advanced to open the Partnership Settings screen Make sure that Dialup Networking DUN is selected and then tap Save You have now created a partnership between the Juno series handheld and the phone so that they can communicate 7 From the My Connections list select the phone that you want to configure the connection to 8 Enter the GPRS access number for the Internet Two of the common GPRS access numbers for cellular phones on GSM networks are 99 1 and 99 If these access numbers do not work contact the cellular phone provider to obtain the appropriate number to use Note You do not need to set up dialling rules or change the Internet connection settings on the phone The connection settings you enter on the handheld are passed to the phone to use for this connection 9 Tap Next Juno Series Handhelds User Guide 61 10 Unless the phone provider confirmed that you must enter user name password and domain settings to access the Internet tap Finish without entering any information in this screen Otherwise Enter the required information b Ifthe phone provider has told you that you need to change the baud rate or other settings for the connection tap Advanced configure these settings and then tap OK c Tap Finish You are returned to the Connections screen You have now configured the dialup networking connection
116. se of them You may not use the services to try to gain unauthorized access to any service data account or network by any means 1 9 Device Information The following features use Internet protocols which send to the appropriate systems device information such as your Internet protocol address the type of operating system browser and name and version of the Software you are using and the language code of the Device where you installed the Software Microsoft uses this information to make the Internet based services available to you a Update Features Windows Mobile Update feature provides you the ability to obtain and install Software updates on your Device if updates are available You may choose not to use this feature Trimble and or your Mobile Operator may not support this feature or an update for your device b Security Updates Digital Rights Management Content owners use Windows Media digital rights management technology WMDRM to protect their intellectual property including copyrights This software and third party software use WMDRM to play and copy WMDRM protected content If the software fails to protect the content content owners may ask Microsoft to revoke the software s ability to use WMDRM to play or copy protected content Revocation does not affect other content When you download licenses for protected content you agree that Microsoft may include a revocation list with the licenses Content owners may require you to up
117. slider control to brag the slider to set your preferred the left to make the backlight darker or to the right 595s vs to make the backlight brighter i ze 3 Tap OK Adjust power settings to conserve power Messaging Use Messaging to send and receive email messages using the Juno series handheld Messaging is the equivalent of your email Inbox To use email you can do one of the following e Synchronize email messages with Microsoft Exchange or Microsoft Outlook on an office computer e Send and receive email messages by connecting directly to an email server through an ISP or a network Synchronizing email messages You can synchronize email messages on the handheld and the computer A N CAUTION When you delete a message on the handheld it is deleted from the office computer the next time you synchronize the devices To synchronize email you must enable Inbox synchronization in the Microsoft ActiveSync technology for Windows XP or the WMDC for Windows Vista or Windows 7 For more information refer to the ActiveSync Help or the WMDC Help on the office computer 38 Juno Series Handhelds User Guide During synchronization e Messages are copied from the mail folders of Exchange or Outlook on the office computer to the Messaging folder on the handheld By default you will receive messages from the past 3 days only the first 100 lines of each message and file attachments of less than 100 KB in siz
118. so that it is face down then shake it to expel the water from the earpiece cavity Juno Series Handhelds User Guide 89 GNSS receiver issues Problem Cause The handheld is not The integrated GNSS Solution Use the Connect or Activate GNSS command in the receiving GNSS positions receiver is not activated GNSS field software to open the GNSS COM port and The GNSS COM port is activate the integrated GNSS receiver For more information see Using the GNSS receiver page 72 Do the following already in USE Only one Exit the software that is using the GNSS COM port application at a time can and then retry in your application have the port open e Check that a GNSS application is not running in the background Tap amp Settings Memory select Running Programs and then select and close any GNSS applications you are not using The GNSS field software is Connect to COM4 using the wrong GNSS COM port Not enough satellites are Move to a location where the receiver has a clear view visible Wait for real time is of the sky and ensure the antenna is not obstructed If you are collecting data for postprocessing clear the selected in the GNSS field wait for real time selection software and the integrated receiver is waiting to receive real time corrections Handheld is lying ona metal surface NMEA data includes The integrated GNSS autonomous positions receiver outputs autonomous positions
119. ss for your account Password 4 Enter a password Select Save password if you want the device to remember your password X Save password gi Tap Next 6 To automatically get connection settings for your email account from the Internet select the check box 7 Tap Next Juno Series Handhelds User Guide 39 40 8 Follow the steps in the Setup wizard If the connection settings are not automatically downloaded from the Internet you must enter them using the connection details supplied by your ISP or network administrator Note You cannot change the account name later 9 Tap Finish 10 Tap OK to download mail immediately Tip To receive TerraSync data files by email edit the settings for the email account you have set up To do this tap Menu and then select Options In the Accounts tab tap the e mail account you want to use to receive TerraSync files The Email Setup wizard appears Tap Next until you reach the last page of the wizard From the Message download limit drop down list select Entire message When you connect the handheld to the email server new messages are downloaded to the Messaging folder messages in the Outbox folder are sent and messages that have been deleted on the email server are removed from the Messaging folder Messages received directly from an email server are linked to the email server rather than an office computer When you delete a message on the handheld it is also dele
120. ss technology If you are unsure about whether the Juno series handheld s radios are approved for use in your country check with your Trimble reseller Use the Radio Activation Manager software to deactivate the integrated Wi Fi and or Bluetooth radio or to reactivate the radios if they have been deactivated The Radio Activation Manager software runs on an office computer The latest copy of the software is available for download from the Trimble website Go to www trimble com support shtml click the link for your receiver type Juno 3B or Juno 3D click Downloads click Juno Series and then click Radio Activation Manager Exposure to radio frequency radiation from Bluetooth and Wi Fi transmitters This device is approved as a portable device with respect to Radio Frequency RF exposure compliance The radiated output power of the internal wireless radio transmitters is less than 10 milliWatt which results in exposure levels far below the FCC radio frequency exposure limits even when operated in close proximity to the body The internal wireless radios operate within guidelines found in international radio frequency safety standards and recommendations which reflect the consensus of the international scientific community Trimble therefore believes the internal Juno Series Handhelds User Guide 7 wireless radios are safe for use by users The level of electromagnetic energy emitted is hundreds of times lower than the electromagnetic e
121. t technical support Power issues Problem Cause Solution The handheld does not The battery is flat Recharge the battery see page 16 turn on The screen is blank The handheld is not The battery cover is off The handheld is connected to USB Charging the battery may take longer using USB and the handheld may take longer to turn on and operate The handheld is turned off The handheld has locked up The internal temperature Replace the battery cover Connect the handheld to mains power see page 16 Press the Power button to turn on the handheld Reset the handheld see Resetting the handheld page 22 Do one or all of the following charging The battery power has risen above the allowed maximum for charging the battery The battery has 0 e Turn off the integrated radios before charging the handheld e Suspend the handheld before charging e Remove the handheld from any external heat sources for example sunlight The handheld will automatically start charging again when the internal temperature has dropped below the range for charging the battery Recharge the battery see page 16 Once the battery percentage bar does not appear in the Power control The charge level of the power The handheld was left in level is above 0 the battery power percentage bar reappears Tap Settings System Power Battery to view the level of power rem
122. tails when connecting an external device to the phone using Bluetooth dialup networking Step 1 Connecting the handheld to the phone and configuring the connection to the dialup network 1 Make sure that the handheld and the Bluetooth device you want to connect to are within five meters of each other and that the Bluetooth radio in each device is turned on For more information see Turning on and turning off the integrated radios page 48 2 On the handheld tap amp Settings Connections Connections 3 Below My ISP tap Add a new modem connection Juno Series Handhelds User Guide 4 Enter the name for the connection For example S K of GO 1 01 enter the name of the phone or the VRS network that you will connect to Enter a name for the connection 5 From the Select a Modem drop down list select Select a modem Bluetooth and then tap Next Bluetooth 6 Ifthe phone you want to connect to is listed go to Step 7 below not listed a Tap Add new device The handheld searches for other Bluetooth devices and displays them in the list If the handheld s integrated Bluetooth radio is turned off it is now automatically turned on b From the list of available devices select the device you want to connect to and then tap Next c To pair with the phone enter a passcode of your choice that you will easily remember onto the handheld and then tap Next d When prompted by the phone enter the
123. ted from the email server the next time you connect the handheld to the email server You can work online or offline When working online you read and respond to messages while connected to the email server Messages are sent as soon as you tap Send which saves space on the handheld When working offline you can disconnect from the email server after you download new message headers or partial messages and then decide which messages to download completely The next time you connect Messaging downloads the complete messages you have marked for retrieval and sends any messages that you have written Voice calls Use the Juno 3D handheld to make and receive phone calls You can enter a number to dial using the keypad or select a number from your Contacts list To make a phone call 1 Make sure that a SIM card is installed See Installing and removing the SIM card page 26 2 Make sure that the phone is turned on See Turning on and turning off the integrated radios page 48 1 Onthe Home screen do one of the following Tap Phone Tap the Phone item and then tap the Phone item again Juno Series Handhelds User Guide 2 On the Phone screen which appears do one of the following vodafone NAOMEME Alternatively tap the left softkey tap the required contact and then tap Call pars tu wxyz Note When you make or receive a voice call the screen automatically locks and the touch screen cannot be used Use
124. th wireless technology page 66 Tip You only need to pair the handheld with a device before you connect to the device for the first time Setting up a connection to a non paired device Setting up a connection to a non paired device enables you to connect to a device that does not allow you to enter a passcode on the device or that does not automatically exchange a pre programmed passkey during pairing To set up a non paired connection to a Bluetooth enabled device 1 Make sure that the handheld and the Bluetooth device you want to connect to are within five meters of each other and that the Bluetooth radio in each device is turned on 2 Tap Settings Bluetooth Juno Series Handhelds User Guide 3 In the Devices tab tap Add new device The Bluetooth E gt XJ ff E 12 17 handheld searches for other Bluetooth devices PAN lt Devices Mede and displays them in the list Tap Add new device to search For other Bluetooth devices Tap on a device to modify its settings 4 Tap the name of the device you want to connect to and then tap Next The Enter Passcode screen appears Add new device 5 Tap Next without entering a passcode 6 Ifprompted to add the device to your device list tap No 7 On the handheld tap the name of the other device The Partnership Settings screen appears 8 Ifrequired change the name of the device in the Display Name field 9 Select the service s you want to use with this de
125. the example shown here eight satellites are being tracked and seven of these satellites are being used to compute GPS positions Note Numbers with no box represent satellites that are available but that the software is not receiving signals from Your current GPS position is displayed at the bottom of the screen X Tip For detailed information on satellite positions and signal strengths use the Satellite information screen in the Status section Resetting the GNSS receiver Trimble GNSS field applications all have options to reset the receiver to e delete the almanac e delete information stored on the last known position e restart the receiver e reset the GNSS receiver to factory default settings Configuring the GNSS field software to connect to the receiver The first time you use GNSS field software on the handheld you may need to configure the software to connect to COM4 which is the GNSS port on the handheld Connecting to the COM port Details of how to configure different types of GNSS field software to connect to the GNSS COM port are as follows GNSS field software Configuration details GPS Controller Run GPS Controller The software automatically activates the integrated GNSS receiver on COMA TerraSync Run Terrasync The software automatically activates the integrated GNSS receiver on COMA Juno Series Handhelds User Guide 73 74 GNSS field software Configuration details ArcPad with the When the Trimb
126. tificate of Authenticity label with a genuine copy of the Software identifies licensed software To be valid this label must be affixed to the Device or included on or in the software packaging If you receive the label separately it is not valid You should keep the label on the device or packaging to prove that you are licensed to use the Software To identify genuine Microsoft Software see http www howtotell com 1 4 Connectivity Software Your Device package may include Windows Mobile Device Center or Microsoft ActiveSync technology If it is included then you may install and use it in accordance with the license terms that are provided with it Ifno license terms are provided then you may install and use only one 1 copy of the Software on a single computer 1 5 Digital Certificates The Software uses digital certificates in X 509 format These digital certificates are used for authentication 1 6 Phone Functionality If the Device Software includes phone functionality all or certain portions of the Device Software may be inoperable if you do not have and maintain a service account with a wireless telecommunication carrier Mobile Operator or if the Mobile Operator s network is not operating or configured to operate with the Device 1 7 Upgrade Software In the event that any upgrades to the Software including Microsoft Software are provided under this EULA then the following shall apply you may follow the applicable i
127. tings screen appears If required change the name of the device in the Display Name field Select the service s you want to use with this device For example if you are connecting to aBluetooth enabled phone to connect to the Internet and receive real time corrections or download background maps select Dialup Networking DUN Juno Series Handhelds User Guide 57 58 aserial device such as a GeoBeacon receiver or a laser rangefinder select Serial Port acomputer to access ActiveSync technology or WMDC select ActiveSync Note Only ActiveSync shows on the Windows embedded handheld Select ActiveSync even if you use the WMDC on the desktop computer Note For more information on the types of devices that the Juno series handheld can connect to and the supported Bluetooth services see Connecting to a Bluetooth device as a client page 55 11 Tap Save 12 Tap OK to close the Bluetooth application 13 Tap ggj to close the Settings screen You have now created a partnership between the Juno series handheld and the other Bluetooth enabled device so that they can communicate To start using the connection you must complete the configuration steps for that type of connection and then connect to the device For more information see e Connecting to a Bluetooth enabled phone for Internet access page 60 e Connecting to a Bluetooth enabled serial device page 65 e Connecting to an office computer using Bluetoo
128. to connect to the Internet or a corporate network using a connection to a Wi Fi access point also known as hotspots Alternatively you can use Bluetooth wireless technology to connect to the Internet using a cellular phone You can also connect directly to other Bluetooth enabled devices such as a GeoBeacon receiver a laser rangefinder or a barcode scanner that are within range typically within 5 m to 10 m of the handheld This section describes how to enable the radios and the main connectivity options available Use the table below to identify the wireless connection type you want to make and then follow the steps provided Connection method To See Juno 3D cellular modem Connect to a cellular network page 51 Wi Fi Connect to a Wi Fi access point page 53 Bluetooth wireless Connect to another Bluetooth enabled device page 54 technology paired and non paired connections Connect to a Bluetooth enabled phone for Internet page 60 access Connect to a Bluetooth enabled serial device page 65 Connect to an office computer to use ActiveSync page 66 technology Beam files to or from another device page 69 Wi Fi or Bluetooth Access a corporate network through your Internet page 69 wireless technology or connection Juno 3D cellular modem Deactivating the wireless radios Note lf you are unsure about whether the Juno series handheld radios are approved for use in your country check with your Trimble reseller Juno Se
129. to each other and then scan again Make sure that the Bluetooth radio is turned on on both the handheld see page 50 and the other Bluetooth device Make sure that the Bluetooth device has been made Discoverable Exit from the application add the port and then run the application again Move the devices closer to each other The devices should reconnect automatically If they do not select the Bluetooth device in the Devices tab Tap and hold the device name and then select De ete Tap New to discover the device again Turn off the Bluetooth radio on the handheld and then turn on the Bluetooth radio see page 50 When you transfer large image or data files other Bluetooth connections may stop responding To avoid problems close other Bluetooth connections before transferring large files Solution Tap the wireless icon in the Home screen or go to the Wireless Manager and make sure Wi Fi is on Move to within range of the network then tap QJ Settings Connections Network Cards and then setup the connection Check that the handheld has the date set correctly on the Home screen If the date is incorrect tap the clock icon on the Home screen and then adjust the date and time Problem Within range of more than one network you are not connecting to the network you would prefer to use The New Network Detected notification appears but the menu bar and soft key options are not displayed Cause Th
130. tor with any other product Make certain that the input voltage on the adaptor matches the voltage and frequency in your location Make certain that the adaptor has prongs compatible with your outlets Do not use the AC adaptor in wet outdoor areas it is designed for indoor use only Unplug the AC adaptor from power when not in use Do not short the output connector Be aware that there are no user serviceable parts in this product If the AC adaptor becomes damaged replace it with a new Trimble AC adaptor Battery safety gt D The rechargeable Lithium ion battery is supplied partially charged Charge the battery completely before using it for the first time see Powering the handheld page 16 If the battery has been stored for longer than six months charge it before use WARNING Use only the battery intended for the Juno series handheld Using any other battery can damage the handheld and may void your warranty If the battery becomes damaged or stops charging fully replace it with a new battery WARNING Do not damage the rechargeable Lithium ion battery A damaged battery can cause an explosion or fire and can result in personal injury and or property damage To prevent injury or damage Do not use or charge the battery if it appears to be damaged Signs of damage include but are not limited to discoloration warping and leaking battery fluid Do not store or leave your device near
131. um ion battery only in a Trimble product that is specified to charge it Be sure to follow all instructions that are provided with the battery charger Discontinue charging a battery that gives off extreme heat or a burning odor Use the battery only in Trimble equipment that is specified to use it Use the battery only for its intended use and according to the instructions in the product documentation Note Many administrations have regulations relating to the recycling or safe disposal of batteries Please consult http www trimble com about_ev shtml for more information Memory card use A A The Juno series handheld provides a memory card slot providing an alternative storage location to the storage memory in the handheld WARNING Static electricity can harm electronic components inside your handheld To prevent static damage Discharge static electricity from your body before you touch any of the electronic components inside your device such as a memory module You can do so by touching an unpainted metal surface WARNING The presence of any dust or moisture in the memory card slot may adversely affect the device and void your Trimble warranty To prevent dust or moisture entering the memory card slot When inserting or removing a memory card place the handheld on a dust free indoor surface External GPS antenna use A The Juno series handheld provides an external GPS antenna port This port
132. verned by the laws of the State of California and applicable United States Federal law without reference to conflict of laws principles or provisions The United Nations Convention on Contracts for the International Sale of Goods will not apply to this EULA Jurisdiction and venue of any dispute or court action arising from or related to this EULA or the Software shall lie exclusively in or be transferred to the courts the County of Santa Clara California and or the United States District Court for the Northern District of California You hereby consent and agree not to contest such jurisdiction venue and governing law 4 2 Section 4 1 notwithstanding if you acquired this product in Canada this EULA is governed by the laws of the Province of Ontario Canada In such case each of the parties to this EULA irrevocably attorns to the jurisdiction of the courts of the Province of Ontario and further agrees to commence any litigation that may arise under this EULA in the courts located in the Judicial District of York Province of Ontario If you acquired this product in the European Union this EULA is governed by the laws of The Netherlands excluding its rules governing conflicts of laws and excluding the United Nations Convention on the International Sale of Goods In such case each of the parties to this EULA irrevocably 5 Juno Series Handhelds User Guide attorns to the jurisdiction of the courts of The Netherlands and further agrees to
133. vice For example if you are connecting to aBluetooth enabled phone to connect to the Internet and receive real time corrections or download background maps select Dialup Networking DUN aserial device such as a GeoBeacon receiver or a laser rangefinder select Serial Port acomputer to access ActiveSync or WMDC select ActiveSync Note Only ActiveSync shows on the Windows embedded handheld Select ActiveSync even if you use the WMDC on the desktop computer Note For more information on the types of devices that the Juno series handheld can connect to and the supported Bluetooth services see Connecting to a Bluetooth device as a client page 55 10 Tap Finish 11 Tap OK to close the Bluetooth application 12 Tap g to close the Settings screen You have now created a partnership between the Juno series handheld and the other Bluetooth enabled device so that they can communicate To start using the connection you must complete the configuration steps for that type of connection and then connect to the device For more information see e Connecting to a Bluetooth enabled phone for Internet access page 60 e Connecting to a Bluetooth enabled serial device page 65 e Connecting to an office computer using Bluetooth wireless technology page 66 Juno Series Handhelds User Guide 59 60 Connecting to a Bluetooth enabled phone for Internet access If your model of Juno series handheld does not contain an
134. vices lt Mode COM Forts 3 Select the Turn on Bluetooth check box to turnon TT en Sve the radio or clear this check box to turn off the a PE E PEOS T SETA devices radio To connect to a device click on the Devices tab below 4 Tap OK Note If the integrated Bluetooth radio is deactivated the message Problem with Bluetooth hardware may appear when you try to turn on the Bluetooth radio or discover devices 50 Juno Series Handhelds User Guide Making the handheld visible discoverable to other Bluetooth devices To allow other Bluetooth enabled devices to connect to the Juno series handheld or if the handheld will not connect to or pair with another device you are attempting to connect to you must make the handheld visible this is sometimes referred to as discoverable To make the handheld visible to other devices 1 Tap Settings Bluetooth 2 Tap the Mode tab 3 Select the Turn on Bluetooth check box if it is not already selected This enables the integrated Bluetooth radio 4 Select the Make this device visible to other devices check box 5 Tap OK Connecting to a cellular network from the modem Juno 3D only Use the Juno 3D handhelds cellular modem to connect to a cellular network and access the Internet or a company network Use this type of connection to access a background map server or for Internet and email access To connect to a cellular network you must 1 Configure th
135. view the entire application window change the when the screen is in screen display to portrait landscape orientation The selected display theme Select the High Contrast display theme Tap Q9 Settings does not have enough Personal Today select the High Contrast theme and then contrast tap OK Keypad issues Problem Cause Solution Pressing the The hardware application Do one of the following application key does key has been programmed Tap the touchscreen softkey to activate the function not activate the to run another program or shown on the softkey function shown on to perform another action e Re program the application key to perform the same action as the touchscreen softkey To do this tap J Settings Personal Buttons select the button to reprogram and then select lt Left Softkey gt or lt Right the softkey above it Softkey gt Memory card issues Problem Cause Solution The handheld does not The handheld does not Use a microSD or microSDHC memory card recognize a memory card support SDIO SD input output cards Files on the memory card Files have been encrypted Remove encryption from the files see Encrypting files are not visible or are not on another device and have on memory cards page 25 able to be opened a menc file extension Juno Series Handhelds User Guide 85 Connection issues Windows Mobile Device Center Problem Windows Mobile Device Center will not connect to the handh
136. when real time corrections are unavailable Real time DGNSS issues Problem Cause The handheld is not The SBAS satellite is receiving SBAS obstructed from view real time corrections You are outside the WAAS EGNOS or MSAS coverage area 90 Juno Series Handhelds User Guide Check that the real time correction source is setup correctly see Connecting to a real time differential correction source page 74 The design and location of the GNSS antenna have been maximized for GNSS reception in a typical user environment Locating the handheld on a metal surface without being in contact with the user may cause a decrease or loss of satellite reception Hold the handheld for optimum reception Configure the NMEA application to filter out non DGNSS positions Solution Check the location of the SBAS satellite in the Skyplot section of the GNSS field software and if possible move to a different location Wide Area Augmentation System WAAS satellites are tracked in the Continental United States including Alaska and in southern parts of Canada European Geostationary Navigation Overlay Service EGNOS satellites are tracked in Europe MTSAT Satellite based Augmentation System MSAS satellites are tracked in Japan
137. y fluid gets onto your skin or clothing immediately use clean water to wash off the battery fluid WARNING Charge and use the rechargeable Lithium ion battery only in strict accordance with the instructions Charging or using the battery in unauthorized equipment can cause an explosion or fire and can result in personal injury and or equipment damage To prevent injury or damage Do not charge or use the battery if it appears to be damaged or leaking Charge the Lithium ion battery only in a Trimble product that is specified to charge it Be sure to follow all instructions that are provided with the battery charger Discontinue charging a battery that gives off extreme heat or a burning odor Use the battery only in Trimble equipment that is specified to use it Use the battery only for its intended use and according to the instructions in the product documentation Juno Series Handhelds User Guide 17 Inserting and removing the battery To insert the battery into the handheld 1 On the back of the handheld turn the back cover lock counter clockwise to unlock it Pull the back cover toward you to remove it 2 To insert the battery angle the left side of the battery into the handheld first with the label facing upwards Press the battery flat until it clicks into place 3 To replace the back cover insert the bottom edge of the cover first and then push it flat until the top clicks into place Turn the
138. ylus taps start the screen alignment sequence and follow the on screen instructions Suspend mode When you press the Power key to turn off the handheld the handheld goes into Suspend mode This is a low power mode that maintains the main memory contents and keeps applications running but does not allow you to operate any of the handheld s functions The handheld appears to be turned off The integrated GNSS receiver is turned off and any application using GNSS is disconnected If a wireless radio is turned on the Wi Fi radio will be turned off and the Bluetooth and wireless cellular modem radios will remain turned on The handheld is capable of receiving data via Bluetooth or the cellular modem radio while it is in Suspend mode The handheld is able to automatically wake up to calendar alarms if it is in Suspend mode CAUTION To save battery power use the Wireless Manager to turn off the wireless radios before you place the handheld into Suspend mode To turn on the handheld when it is in Suspend mode press the Power key The handheld is immediately ready for operation There may be a delay of up to 30 seconds while the integrated GNSS receiver and the Wi Fi radio automatically reactivate You can configure the handheld to automatically enter Suspend mode when it has been idle for a specified time By default the handheld is set to enter Suspend mode if it is not used for three minutes Juno Series Handhelds User Guide 21 22

Download Pdf Manuals

Related Search

Related Contents

3年 - 鹿児島工業高等専門学校  QUEL TABLEAU DE BORD POUR LA BPI ? L`évaluation au  Samsung SPELER HD950 User's Manual  Installation d`un aquarium - conseils utiles pour débutants  UN PART - Armstrong  NKTH-FI /NKTH-FIR NKTH-FIH /NKTH-FIS  Mode d`emploi FR - Conseil & Développement  Manuel d`installation  TheGreenBow IPSec VPN Client  Manual do Usuário Medidor de pressão  

Copyright © All rights reserved. Failed to retrieve file