SONIC ULTRAMIZER SU9920
Contents
1. Your product was carefully packed at the factory to ensure safe transport Nevertheless if the box is damaged inspect the unit immediately for signs of damage lt gt If the unit is damaged please do NOT return it to us but notify your dealer and the shipping company immediately otherwise claims for damage or replacement may not be granted We recommend that you use a flight case to give the unit optimum protection during use or transport Always use the original box to prevent damage during storage or transport Make sure that children cannot play unsupervised with the unit or its packaging a A A R Please ensure proper disposal of all packing materials 1 1 2 Initial operation Ensure adequate air supply and to avoid overheating do not place the unit near radiators etc Blown fuses must be replaced by fuses of the correct rating Please refer to the SPECIFICATIONS section for the applicable rating For connection to the mains use the enclosed power cord with cold connector which complies with the relevant safety regulations gt Please make sure that all devices are properly grounded For your own safety never remove or disable the ground conductors from the devices or on the power cords The unit must always be connected to the mains outlet with a protective grounding connection 1 The tone quality may diminish within the range of powerful radio broadcasting stations and high frequency sources Increase2. any defects within the specified warranty period that are not excluded from this warranty as described under 5 BEHRINGER shall at its discretion either replace or repair the product using suitable new or reconditioned parts In the case that other parts are used which constitute an improvement BEHRINGER may at its discretion charge the customer for the additional cost of these parts 2 If the warranty claim proves to be justified the product will be returned to the user freight prepaid 3 Warranty claims other than those indicated above are expressly excluded 4 RETURN AUTHORIZATION NUMBER 1 To obtain warranty service the buyer or his authorized dealer must call BEHRINGER during normal business hours BEFORE returning the product All inquiries must be accompanied by a description of the problem BEHRINGER will then issue a return authorization number 2 Subsequently the product must be returned in its original shipping carton together with the return authorization number The return shipment address will be indicated by BEHRINGER 3 Shipments without freight prepaid will not be accepted SONIC ULTRAMIZER SU9920 5 WARRANTY REGULATIONS 1 Warranty services will be furnished only if the product is accompanied by a copy of the original retail dealer s invoice Any product deemed eligible for repair or replacement under the terms of this warranty will be repaired or replaced 2 If the product needs to b
3. contrast to an exciter the SONIC ULTRAMIZER does not add any new harmonics to the signal but rather improves the signal quality by processing the harmonics in the original material Through this action the sound is changed more naturally than it is through harmonic enhancement with an exciter The concept behind the SONIC ULTRAMIZER is based on the fact that through signal modification as is caused for example by equalizers and frequency filters the original signal is distorted Through this the time based sequence of the fundamental tone and the harmonics whose correlation is extremely important for naturally sounding signal reproduction via loudspeakers is shifted Restoring the original time based relationships between the fundamental tone and the harmonics thus ideally leads to optimal reproduction of the original signal and hence a sound which is free from unpleasant distortion With the SU9920 you can reproduce the original relationships between the fundamental tone and the harmonics and additionally boost the high and low frequency portions independently of each other Through this the transparency of the starting signal is greatly increased and a precise reproduction of all signals over the entire frequency spectrum is obtained 3 1 Application examples Similarly to a compressor or a graphic equalizer the SU9920 is integrated into the signal path i e connected in series to mix outputs or integrated into the insert path of a
4. harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures A Reorient or relocate the receiving antenna A Increase the separation between the equipment and receiver A Connect the equipment into an outlet on a circuit different from that to which the receiver is connected A Consult the dealer or an experienced radio TV technician for help This device complies with Part 15 of the FCC rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Important information Changes or modifications to the equipment not expressly approved by BEHRINGER USA can void the user s authority to use the equipment BEHRINGER www behringer com JUST LISTEN
5. m m mi Prolless Low CdTOUR Pr Figure 2 1 Control elements on the front panel SONIC CLIP This LED is constantly lit when the input level is too 5 IN OUT With this switch signal processing is activated high If it lights up for a short period of time it is warning and deactivated The LED lights up in the active operating you of an impending overdrive There is a safety headroom mode f 3dBu before the signal b distorted The LED aa en i a 6 POWER Use the POWER switch to put the unit into i operation The POWER switch should be in the Off 2 LEDs The four LEDs display the output level in 10dBu position when you connect the unit to the power feed steps Regular illumination of the OdBu LED indicates an mains optimal output level To disconnect the unit from the mains pull out the power plug 3 PROCESS With this control the portion of high frequency When switching on the unit ensure that the power plug is easily accessible To mount the unit in a rack ensure that the unit can signals to be processed by the SU9920 is specified The easily be disconnected from the mains by means of a plug or an MAX setting corresponds to a level boost of 12dbU at 5kHz all pole mains switch on the back side lt gt Please note Switching the POWER switch off does LOW CONTOUR This control adjusts the portion of low not disconnect the unit completely from the mains For frequency signals t
6. strain relief clamp tip sleeve signal ground shield sleeve strain relief clamp tip sleeve signal ground shield sleeve Tl if Fig 4 4 Insert cable with one 4 TRS tip ring sleeve jack plug on one end and two TS tip sleevel jack plugs on the other end 4 INSTALLATION 9 a SONIC ULTRAMIZER SU9920 5 SPECIFICATIONS INPUTS Connections XLR sockets and stereo jacks Type Balanced Input impedance 20 kQ balanced 10 kQ unbalanced Nominal input level 4 dBu Maximum input level 22 dBu OUTPUTS Connections XLR sockets and stereo jacks Type Servo balanced Output impedance 60 Q balanced 60 Q unbalanced Maximum output level 22 dBu ENHANCER SECTION Type 3 band phase delay and dynamic filter PROCESS control max 12 dBu 5 kHz LOW CONTOUR control max 12 dBu 50 kHz SYSTEM DATA Frequency response 25 Hz to 50 kHz 3 dB Signal to noise ratio gt 95 dB unweighted 20 Hz to 20 kHz Distortion THD N 0 05 typ 4 dBu 1 kHz IN OUT Crosstalk gt 75 dB POWER SUPPLY Mains voltage USA Canada 120 VAC 60 Hz China Korea 220 VAC 50 60 Hz Europe UK Australia 230 VAC 50 Hz Japan 100 VAC 50 60 Hz Export model 120 230 VAC 50 60 Hz Power consumption approx 12 W Fuse 100 120 VAC T 250 mA H 250 V 220 240 VAC T 125 mA H 250 V DIMENSIONS WEIGHT Dimensions HxWxD approx 1 75 x 19 x 8 54 approx 44 5 x 482 6 x 217 mm Weight approx 4 85 Ibs approx 2 2 kg BEHRINGER i
7. suggestions for new products you ve made a significant contribution to shaping our company and making it successful In return we guarantee you uncompromising quality as well as excellent technical and audio properties at an extremely reasonable price All of this will enable you to give free rein to your creativity without being hampered by budget constraints We are often asked how we manage to produce such high quality devices at such unbelievably low prices The answer is quite simple it s you our customers Many satisfied customers mean large sales volumes enabling us to get better purchasing terms for components etc Isn t it only fair to pass this benefit on to you Because we know that your success is our success too would like to thank all of you who have made the SU9920 possible From the developers to the many other employees at this company each has made a personal contribution to you the BEHRINGER user My friends it s been worth the effort Thank you very much k p Uli Behringer TABLE OF CONTENTS 1 INTRODUCTION zuuusuussnnennnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn 5 1 1 Before YOUNGEU SAMO sass coresarconcersnenceasgersusccarens rennen 5 DAA ASMIPIMO N r sesaat iaa aa ia EEEE 1 1 2 Initial operation 1 1 3 Online Registration 5 2 CONTROL ELEMENTS AND CONNECTIONS u 6 2 1 Front pael parry era 6 2 2 Rear panel 0er 6 3 PRACTICAL APPLICATION u nns
8. the distance between the transmitter and the unit and use shielded cables for all connections SONIC ULTRAMIZER SU9920 1 1 3 Online Registration Please register your new BEHRINGER equipment right after your purchase by visiting http www behringer com and read the terms and conditions of our warranty carefully Should your BEHRINGER product malfunction it is our intention to have it repaired as quickly as possible To arrange for warranty service please contact the BEHRINGER retailer from whom the equipment was purchased Should your BEHRINGER dealer not be located in your vicinity you may directly contact one of our subsidiaries Corresponding contact information is included in the original equipment packaging Global Contact Information European Contact Information Should your country not be listed please contact the distributor nearest you A list of distributors can be found in the support area of our website http www behringer com Registering your purchase and equipment with us helps us process your repair claims more quickly and efficiently Thank you for your cooperation 1 INTRODUCTION 5 SONIC ULTRAMIZER SU9920 2 CONTROL ELEMENTS AND CONNECTIONS 2 1 Front panel The control elements for CHANNEL 1 and CHANNEL 2 are identical In the following paragraphs the functions are described using CHANNEL 1 as an example ae CHANNEL 1 CHANNEL 2 um a ULTRAMIZER 3 20 40 o o cu BEHRINGER mu AH
9. ER accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description photograph or statement contained herein Colors and specifications may vary slightly from product Products are sold through our authorized dealers only Distributors and dealers are not agents of BEHRINGER and have absolutely no authority to bind BEHRINGER by any express or implied undertaking or representation No part of this manual may be reproduced or transmitted in any form or by any means electronic or mechanical including photocopying and recording of any kind for any purpose without the express written permission of BEHRINGER International GmbH ALL RIGHTS RESERVED c 2007 BEHRINGER International GmbH BEHRINGER International GmbH Hanns Martin Schleyer Str 36 38 47877 Willich Muenchheide II Germany Tel 49 2154 9206 0 Fax 49 2154 9206 4903 6 WARRANTY 11 FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION Responsible party name BEHRINGER USA Inc Address 18912 North Creek Parkway Suite 200 Bothell WA 98011 USA Phone Fax No Phone 1 425 672 0816 Fax 1 425 673 7647 hereby declares that the product complies with the FCC rules as mentioned in the following paragraph This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against
10. SU9920 SONIC ULTRAMIZER www behringer com User Manual Version 1 0 April 2007 BEHRINGER JUST LISTEN SONIC ULTRAMIZER SU9920 IMPORTANT SAFETY INSTRUCTIONS CAUTION To reduce the risk of electric shock do not remove the top cover or the rear section No user serviceable parts inside Refer servicing to qualified personnel CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR WARNING To reduce the risk of fire or electric shock do not expose this appliance to rain and moisture The apparatus shall not be exposed to dripping or splashing liquids and no objects filled with liquids such as vases shall be placed on the apparatus This symbol wherever it appears alerts you to the presence of uninsulated dangerous voltage inside the enclosure voltage that may be sufficient to constitute a risk of shock This symbol wherever it appears alerts you to important operating and maintenance instructions in the accompanying literature Please read the manual 1 Read these instructions 2 Keep these instructions 3 Heed all warnings 4 Follow all instructions 5 Do not use this apparatus near water 6 Clean only with dry cloth 7 Do not block any ventilation openings Install in accordance with the manufacturer s instructions 8 Do not install near any heat sources such as radiators heat registers stoves or other apparatus inclu
11. are the original and processed signals repeatedly press the IN OUT button 7 Repeat steps 4 to 6 until you are satisfied with the result 8 3 PRACTICAL APPLICATION 4 INSTALLATION 4 1 Rack mounting The BEHRINGER SONIC ULTRAMIZER SU9920 requires 1U for installation in a 19 inch rack Please make sure that you leave around 10cm for the rear connections For installation of the unit in a rack please use M6 machine screws and nuts 4 2 Audio connections There are various ways to integrate the SU9920 into your setup Depending on the application you will need different connecting cables and these will be discussed in the following section 4 2 1 Cabling with jack cables To operate the SU9920 in series with other equipment you will need standard commercial 1 4 jack cables often referred to as instrument cables or patch cables These cables have a 1 4 TS jack plug at each end Connect the inputs of the equipment with the corresponding outputs of each of the other devices Unbalanced 1 4 TS connector sleeve tip ground shield signal strain relief clamp sleeve tip BR Fig 4 1 Unbalanced 1 4 TS jack plugs If your other equipment has balanced inputs use a balanced switched cable with two stereo jack plugs at the balanced outputs of the SU9920 These cables provide a high level of security against interference signals such as noise interference from power cables and they should be used for al
12. ding amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Place the power cord so that it is protected from being walked on and sharp edges Be sure that the power cord is protected particularly at plugs convenience receptables and the point where it exits from the apparatus 11 The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection 12 Where the MAINS plug or an appliance coupler is used as the disconnect device the disconnect device shall remain readily operable 13 Only use attachments accessories specified by the manufacturer 14 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over LAT 15 Unplug this apparatus during lightning storms or when unused for long periods of time 16 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged
13. e modified or adapted in order to comply with applicable technical or safety standards on a national or local level in any country which is not the country for which the product was originally developed and manufactured this modification adaptation shall not be considered a defect in materials or workmanship The warranty does not cover any such modification adaptation irrespective of whether it was carried out properly or not Under the terms of this warranty BEHRINGER shall not be held responsible for any cost resulting from such a modification adaptation 3 Free inspections and maintenance repair work are expressly excluded from this warranty in particular if caused by improper handling of the product by the user This also applies to defects caused by normal wear and tear in particular of faders crossfaders potentiometers keys buttons tubes guitar strings illuminants and similar parts 4 Damage defects caused by the following conditions are not covered by this warranty A improper handling neglect or failure to operate the unit in compliance with the instructions given in BEHRINGER user or service manuals A connection or operation of the unit in any way that does not comply with the technical or safety regulations applicable in the country where the product is used A damage defects caused by force majeure or any other condition that is beyond the control of BEHRINGER 5 Any repair or opening of the unit carried out b
14. l long cable routes Balanced 1 4 TRS connector sleeve tip strain relief clamp ground shield hot ve sleeve ring ring cold ve bo For connection of balanced and unbalanced plugs ring and sleeve have to be bridged at the stereo plug Fig 4 2 Balanced 1 4 TRS jack plugs SONIC ULTRAMIZER SU9920 Alternatively you can use professional XLR cables with an XLR socket on one side and an XLR plug on the other side This cable connection is the most reliable both electrically and mechanically Balanced use with XLR connectors input For unbalanced use pin 1 and pin 3 have to be bridged output 1 ground shield 2 hot ve cold ve Figure 4 3 Balanced XLR plug 4 2 2 Connection with insert cables Please use standard insert cables equipped with 1 4 connectors to connect the SONIC ULTRAMIZER to the insert path of a mixing console These Y cables have two 1 4 TS connectors at one end and one 1 4 TRS connector at the other Connect the plug marked Send to the INPUT L jack on the effects unit Connect the Return plug to the OUTPUT L jack on the device Connect the TRS connector to the insert jack of the channel strip on the mixing console Use two insert cables for stereo sub groups and main mix inserts The second cable must be connected to the INPUT OUTPUT R jacks of the SU9920 strain relief clamp tip sleeve sleeve send out ground shield ring ring 7 in HN
15. liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped 17 Caution These service instructions are for use by qualified service personnel only To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions Repairs have to be performed by qualified service personnel SONIC ULTRAMIZER SU9920 SONIC ULTRAMIZER Ultimate Stereo Sound Enhancement Processor A A gt gt gt gt gt gt Dramatically improves your sound by adding clarity dimension and depth Produces natural brightness through harmonic enhancement and tighter bass with increased punch through phase compensation Professional and home recording studios brings out the full sound spectrum of your tracks mixdown and mastering PA nightclub and DJ systems improves the performance of any sound system by adding sparkling high end and super tight bass without the need for additional speakers or amps Churches and worship houses dramatically increases voice intelligibility and your music gains presence Guitar bass and keyboard rack improves articulation and restores cutting power often lost in miking and amplification Broadcasting and webcasting adds loudness and live presence even on small car or computer speakers 5 1 and hi fi setups DVDs become stunningly lifelike and the spatial di
16. marily work with a digital audio workstation you can perform the final mastering with the SU9920 and an external recorder For this application connect the SU9920 so that it comes before the mastering recorder Channels 1 and 2 must have the same settings since this application involves stereo processing Otherwise the original stereo image will be distorted 3 PRACTICAL APPLICATION 7 SONIC ULTRAMIZER SU9920 I Recorder Outputs 1 Outputs 2 XM8500 FCA202 Keyboard Line in 2 3 Main out Line in 1 XENYX 1622FX Figure 3 2 The SU9920 in Studio mode 3 1 3 Stage operation with instrument amplifiers Besides being ideal for use with stereo signals the SONIC ULTRAMIZER is also suitable for use with one or two individual signals e g guitars With electric guitars it can be used in combination with a combo amp or a separate modelling processor amplifier combination to give the guitar sound more presence fullness and punch A similar combination with a keyboard and an external amplifier is possible Because the two channels of the SU9920 work independently even two different mono signals can be processed Connect the SU9920 with the effects loop connections on your combo amplifier if it provides for connection in insert mode i e exclusively reproduces the output signal of the SU9920 via the loudspeaker If you are using a modelli
17. mension of your sound system increases dramatically Dedicated Low contour and Process controls per channel for ultimate sound enhancement Accurate 5 segment LED level meters for optimum performance Servo balanced inputs and outputs with 4 TRS and gold plated XLR connectors High quality components and exceptionally rugged construction ensure long life Conceived and designed by BEHRINGER Germany SONIC ULTRAMIZER SU9920 FOREWORD Dear Customer Welcome to the team of SONIC ULTRAMIZER users and thank you very much for expressing your confidence in us by purchasing this device Writing this foreword for you gives me great pleasure because it represents the cul mination of many months of hard work delivered by our engineering team to achieve a very ambitious goal to present an outstanding Psychoacoustic Processor whose neutral sound makes them ideal for studio use The task of designing our new SU9920 certainly meant a great deal of responsibility which we assumed by focusing on you the discerning user and musician Meeting your expectations also meant a lot of work and night shifts But it was fun too Developing a product usually brings a lot of people together What a great feeling it is when all who participated in such a project can be proud of what they ve achieved It is our philosophy to share our enjoyment with you because you are the most important member of the BEHRINGER team With your highly competent
18. mixing console Avoid parallel use in the Aux path as with an effects unit since this mixes the original signal with the processed effect signal thereby considerably worsening the sound characteristics The best way to use the SONIC ULTRAMIZER is in a signal chain e g from keyboard to SU9920 to amplifier as the following application examples show 3 1 1 Live sound The SU9920 is ideally suited to use with live sound systems in clubs discos live concerts and public performances Here the unit not only can considerably improve the signal quality but also can compensate for the inadequacies of small or weak PA systems For this application the unit should be installed between the mixing console mix output and the amplifier input If a graphic equalizer is also used it should be positioned after the SU9920 Because this application involves stereo processing channels 1 and 2 must have the same settings Otherwise the original stereo image will be distorted SONIC ULTRAMIZER SU9920 B1220 PRO B1220 PRO SONIC ULTRAMIZER SU9920 Inputs 2 Keyboard Main out fi XENYX 1622FX Figure 3 1 Use of the SU9920 with live sound systems 3 1 2 Studio application In a studio environment the SONIC ULTRAMIZER is ideal for mastering to enhance the sound of recordings The SU9920 can lend your music the professional polish of high quality productions in just a few steps Even if you pri
19. ng processor you must connect the processor output to the SU9920 input and route the SU9920 signal to the amplifier E Guitar Seno LX1B PRO Inputs 2 Outputs 2 SONIC ULTRAMIZER SU9920 o BEHRINGER o fo e o o BX4410A Figure 3 3 The SU9920 in use with guitar amplifiers 3 2 Basic operation Due to the small number of control elements on the SU9920 it is easy to learn to use it Perform the following steps 1 Connect the unit according to the application as described in section 3 1 2 Switch on all devices amplifier and loudspeaker last and ensure that the IN OUT switch on the SU9920 is illuminated i e that the unit is working and all controls are set to MIN lt gt First make the following settings for one channel channel 1 or 2 according to the input assignment For stereo applications choose the same settings for the second channel as those made for the first channel 3 Set the signal level on the device feeding the SONIC ULTRAMIZER such that the CLIP LED on the SU9920 either does not light up at all or for a short period of time only 4 Turn the PROCESS control until the desired enhancement effect in the high frequency range is achieved or the OdBU LED in the level display lights up continuously 5 Turn the LOW CONTOUR control until the desired enhancement effect in the low frequency range is achieved or the OdBu LED in the level display lights up continuously 6 To comp
20. nssnnsnnnnonnnnnonnnnnnnnnannannen 7 3 1 Application Gxam ple isisisi aiai 7 SAT LIVE Sound ana 7 3 1 2 Studio application sirsiran T 3 1 3 Stage operation with instrument amplifiers 8 3 2 BASIC operation 8 4 INSTALLATION zuussusenusssnennnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnrnnnnnnnnnnn AA Rack MOUNN arsana iia 4 2 Audio COMNECONS nenne 4 2 1 Cabling with jack cables 4 2 2 Connection with insert cables 9 5 SPECIFICATIONS swsisssssscciccscccevsssasssecsessasscvaisscsscccscasasceen 10 6 WARRANTY sc civics 25 2 ctzaxiaseee sets cocdcticacsetzcavsssceevtosscezcatiaaies 11 1 INTRODUCTION Thank you for purchasing the SONIC ULTRAMIZER SU9920 The SU9920 is a professional signal processor used to improve the presence and liveliness of audio signals For signal processing a combination of a dynamic filter and a phase delay algorithm is used The latter is based on psychoacoustic principles and guarantees improved sound characteristics without unnatural side effects The unit works with two independent channels so you can selectively process stereo or two mono signals separately from each other Whether you purchased the SU9920 for your studio live sound or the stage the unit s sound qualities are so impressive that you ll never again want to do without this sound enhancer when mixing We at BEHRINGER hope you enjoy your new acquisition 1 1 Before you get started 1 1 1 Shipment
21. o be processed by the SU9920 The this reason you should unplug the power cord if the MAX setting corresponds to a level boost of 12dbU at unit is not going to be used for prolonged periods of 50kHz time 2 2 Rear panel BEHRINGER SONIC ULTRAMIZER CAUTION REPLACE FUSE Wi MODEL SU9920 Mmsanerusenee Un TA 3 En SERIAL NUMBER WE OUTPUTS 2m INPUTS E OUTPUTS Tui INPUTS 1 ms ON Figure 2 2 Control elements on the rear panel 7 e mains Balance sockets and jacks these FUSE HOLDER IEC POWER SOCKET Th i 9 INPUTS 1 Bal d XLR k d jack h connection is made via an IEC male socket It complies are used to connect line level signal sources e g a mixing with relevant safety regulations A suitable power cord is console To avoid interference only the jacks or the XLR included Replace the fuse with a fuse of the same type sockets should be used 8 OUTPUTS 1 Balanced XLR sockets and jacks these SERIAL NUMBER The serial number can be found on are used to connect amplifiers as well as further signal the back right side of the unit It is needed for online processors and recording devices The jacks and XLR registration sockets can be used in parallel when two outputs are required 6 2 CONTROL ELEMENTS AND CONNECTIONS 3 PRACTICAL APPLICATION The SU9920 belongs to the group of psychoacoustic enhancers which also includes exciters These devices can enhance the quality of audio signals In
22. s constantly striving to maintain the highest professional standards As a result of these efforts modifications may be made from time to time to existing products without prior notice Specifications and appearance may differ from those listed or illustrated 10 5 TECHNICAL SPECIFICATIONS 6 WARRANTY 1 OTHER WARRANTY RIGHTS AND NATIONAL LAW 1 This warranty does not exclude or limit the buyer s statutory rights provided by national law in particular any such rights against the seller that arise from a legally effective purchase contract 2 The warranty regulations mentioned herein are applicable unless they constitute an infringement of national warranty law 2 ONLINE REGISTRATION Please do remember to register your new BEHRINGER equipment right after your purchase by visiting www BEHRINGER com alternatively www BEHRINGER de and kindly read the terms and conditions of our warranty carefully Registering your purchase and equipment with us helps us process your repair claims quicker and more efficiently Thank you for your cooperation 3 WARRANTY 1 BEHRINGER BEHRINGER International GmbH including all BEHRINGER subsidiaries except BEHRINGER Japan warrants the mechanical and electronic components of this product to be free of defects in material and workmanship for a period of one 1 year from the original date of purchase in accordance with the warranty regulations described below If the product shows
23. y unauthorized personnel user included will void the warranty 6 If an inspection of the product by BEHRINGER shows that the defect in question is not covered by the warranty the inspection costs are payable by the customer 7 Products which do not meet the terms of this warranty will be repaired exclusively at the buyer s expense BEHRINGER will inform the buyer of any such circumstance If the buyer fails to submit a written repair order within 6 weeks after notification BEHRINGER will return the unit Costs for freight and packing will be invoiced separately C O D When the buyer has sent in a written repair order such costs will also be invoiced separately 6 WARRANTY TRANSFERABILITY This warranty is extended exclusively to the original buyer customer of retail dealer and is not transferable to anyone who may subsequently purchase this product No other person retail dealer etc shall be entitled to give any warranty promise on behalf of BEHRINGER 7 CLAIM FOR DAMAGES Failure of BEHRINGER to provide proper warranty service shall not entitle the buyer to claim consequential damages In no event shall the liability of BEHRINGER exceed the invoiced value of the product Customers in the European Union please contact BEHRINGER Germany Support for further details Technical specifications and appearance are subject to change without notice The information contained herein is correct at the time of printing BEHRING
Download Pdf Manuals
Related Search