MDCDWinUsersManual_2.0
Contents
1. l 2 monitors display images independently To control grayscale display three palette modes Linear Static Gray Dynamic Gray Non Linear Static Gray are available You can select one of three modes These modes are valid only for grayscale mode Linear Static Gray Grayscale Mode This mode provides fixed 256 entries in the palette Therefore it MD2W MD3W is different from standard system palette of Windows Dynamic Gray Application can dynamically change the entry of palette in this mode Non Linear Static Gray This mode sets the first and last ten palette entries for Windows The other 236 entries are ramped in ascending order Select one of two modes Block Mode Image Mode Block Mode This mode provides the best performance But some visual Transfer Mode artifact may be seen If they are seen change mode to Image Mode Image Mode This mode provides the most smooth images RealVision Inc 26 VREngine MD CD Series User s Manual Display Modes in Multi monitor Mode MD2W MD3W WideView Mode TwinView Mode i IG a Man E am DualView Mode RealVision Inc 2l VREngine MD CD Series User s Manual About Dual Mode MD2W MD3W In DualView Mode one VREngine board is recognized as 2 devices for operating system Windows To support the DualView Mode virtual monitor s are displayed in Display Properties Normally the icon of virtual monitor s is surrounded by a dotted line2. Windows VREngine MD CD Series If you want to search for Microsoft digitally signed software visit the Windows Update Web site at http windowsupdate microsoft com to see if one is available Do you want to continue the installation i No More Info 10 If multiple board is installed following dialog box will appear two times of the installed number of board s for Windows 2000 or one time of the installed number of board s for Windows XP There appears no dialog box for Windows NT Please click Yes for each dialog box After the secondary board each dialog box show what number of board is corresponded Digital Signature Not Found E x The Microsoft digital signature affirms that software has been tested with Windows and that the software has not been altered since it was tested The software you are about to install does not contain a Microsoft digital signature Therefore there is no guarantee that this software works correctly with Windows VREngine MD CD Series Secondary Display If vou want to search for Microsoft digitally signed software visit the Windows Update Web site at http windowsupdate microsoft com to see if one is available Do you want to continue the installation 11 Following dialog box will appear and then click OK If multiple board is installed same type of dialog box will appear as same as the number of boards and then click OK for each of them Inf
3. colors 1 Select monitor for setting at Display Properties 2 Click Advanced button or double click monitor icon for setting and Monitor and RealVision Inc VREngine MD CD Series Properties dialog appears 3 Select Adaptor and click List All Modes button and mode reference appears 4 Select the resolution and click OK RealVision Inc 21 VREngine MD CD Series User s Manual Click Advanced then following dialog box will appear Color Management General Adapter Display Font Size Normal size S5 dpi Compatibility Some programs operate improperly if you do nat restart your computer after you change display settings After change display settings C Restart the computer before applying the new display settings Apply the new display settings without restarting Ask me before applying the new display settings cancel dme Click VREngine MD CD Series then following dialog box will appear You can set three modes for each monitor respectively Default Monitor and Real ision Inc REngineMD CD General Adapter Monitor Troubleshooting Color Management VHEngine MD IL D Senes Wode Setup Display Adapter Ho NSPLAY 1 Grayscale Ivlode Transfer Iode Linear Static Gray v Block wode Multi IMIarator lode Wide View Ivlocle v Ivionitor Re Setup coed ms RealVision Inc 22 VREngine MD CD Series U
4. s Manual 6 Uninstall Driver Software 6 1 Un installation for WindowsNT4 0 2000 XP If you need to install your RealVision display driver follow these instructions for Windows NT 4 0 and Windows 2000 1 Select Settings s from Start Menu on Task Bar gt then click Control Panel c 2 Double Click Add Remove Programs icon Add Remove Programs Ez bartin 3 Select VREngine MD CD Series from the list gt then click Add Remove button ER Add Remove Programs DI x fe hme sl b Currently installed programs Sort by Name z p Change or fe VREngine MD CD Series Display Driver Remove Programs To change this program or remove it From your Change Remove a v computer click Change Remove ea iz Windows 2000 Service Pack 2 Add New Programs Add Remove Windows Components RealVision Inc 29 VREngine MD CD Series User s Manual 4 Click Yes button VREngine MD CD Series e Do you want to uninstall YREngine MDBICD Driver 5 Restart Windows after all of applications are terminated Un installation have not completed without restart VREngine MD CD Series RealVision Inc 30 VREngine MD CD Series User s Manual Product Information 7 1 Technical Specification VREngine MD2W MD2W Operating Conditions Operating systems Windows NT 4 0 Workstation ServicePack 6 or greater Windows 2000 Professional Windows XP Host bus spec PCI 32 bit
5. sosun 2 About Trade MarKS xtc inwecancesinevecdanesttntestareikantsSentnanatastuetnteeasisnieenteimestsisetsce tind 2 Foroa i T 3 1 Check and Save Packaging Materials eeeeseeeeeeeseeesse 5 2 Ipstallagon Procedure x isctwuscseciost ip VELIM DrnE Usted utu e e CR ero E ndis 5 2 Board MStalaton ssena e RD 5 3 1 Notices for board installation 2 0 0 0 ceccceceseeeeeece ees eeseeeseeeeseeseeteeeees 6 3 2 Configuring DIP switch settings cece ceccceeeeeeeeceeeeeeeeseeeseeeeseeeas T 3 3 Board installation procedure eeeeeseeseeeeeneernerene 9 3 4 Connection with LCD Monitor s eesseeeeeenreeennne 10 4 SornwareInstallaloDt 4eutensetiaiemus Quse Detur A 11 4 1 Installation for WindowsNTA4 0 2000 XP eere 11 S JIDISDIay TPTODGIlIGS srcxidstoutiimte visendi aiio o Fur a cca d Ae tr EE Quisea 18 5 1 Display Properties for Single board configuration 18 5 2 Display Properties for Multiple board configuration 24 5 3 Detail Setting for Display Properties seeeeeeeseesse 25 o Uninstall Driver SOMWAIC 4 amp ssciceieix vssotbtr Iun deer n ERO Das m IO a ceris 28 6 1 Un installation for WindowsNTA4 0 2000 XP sssesee 28 Te JrodHetIntormallOb sxsdtssenscutesibtei a Eds toot bes ti ate mss 31 7 1 Technical Specificati
6. 5V 3 3V PCI Version2 2 compliant Host bus frequency Mechanical Spec 174 5 W x 106 7 H mm or 7 1 W x 4 2 H inch Display Resolution 1600 x 1200 pixel Landscape 1200 x 1600 pixel Portrait Dual head case 3200 x 1200 pixel Landscape 2400 x 1600 pixel Portrait Connectable Monitor 2M VESA compliant digital LCD monitor d 2M 133 6MHz Dotclk digital LCD monitor monitors Display Mode e Single Head case Landscape Portrait Dual Head case Landscape Landscape Portrait Portrait S display function Available VGA standard compliant ote 3 Rotate direction of Counter clockwise At Landscape Portrait switching Screen of display bits 8 bit pixel grayscale 10 bit pixel grayscale Integrated Gamma table can select 256 scales from 1024 scales 8 24 bit pixel color ey Video Output Spec Cercaron UUFLFOGCE RealVision Inc 31 VREngine MD CD Series User s Manual Operating Temperature 1 111 0 45C 32 113F Condition for Temp amp Humidity 40 75 C 40 167F preservation 5 100 None condensing Altitude Lower than 11 000m 36 000ft Note 1 With the use except for 2M VESA compliant monitors EDID can provide compatibility Note 2 Display mode specifications 1200 4 1600 1200 ds Landscape display Portrait display 2400 3200 a 1 e A gt Multi monitor mode DualView mode only Note 3 With a VGA mode VGA display of 640 x480 dot
7. Screen area Less More 1024 by 768 pinels Colors High Color 16 bit v Use this device as the primary monitor v Extend my Windows desktop anta this monitor Identify Troubleshoot Advanced Cancel Apply Select each monitor icons and go to Default Monitor and VREngine MD CD Series Products as the case of one board configuration Then select one board using Display Adaptor NO and set functions respectively Default Monitor and Real ision Inc YREngine MO CD Series Pr Sb xl General Adapter Monitor Troubleshooting Color Management VR Engine MD CD Series Mode Setup Display Adapter Ho Select a board Transfer IvIode Block Iode Linear Static Gray Multi Morator IvIode Wide View Mode Wornitor Re Setup coc tosh _ RealVision Inc 25 VREngine MD CD Series User s Manual 5 3 Details for Display Properties Detail setting parameters are described in following table Selection of Allows you to select and configure for each board when you have Board two or more boards installed Allows you to select one display mode from following three mode in multi monitor mode for displaying image s on multiple monitors Multi monitor WideView Mode Mode Two monitors display images as one monitor MD2W MD3W TwinView Mode Same images are displayed on two monitors mirroring Please see page DualView Mode 2 28 too
8. and this indicates that you cant use virtual monitor s please see page 20 When you use DualView mode you need to enable the virtual monitor s Windows desktop can move to the monitor You can enable the virtual monitor s by selecting DualView at Multi monitor Mode during you are selecting the corresponding monitor to the virtual monitor In case of this manual in the example window display at page 20 Select DualView at Multi monitor Mode with selecting the monitor icon of 2 Please note following points for DualView Mode setting and usage 1 Colors setting of two monitors must be the same by manual operation 2 You can t enable the virtual monitor s except for DualView Mode 3 Two monitors that are used in DualView Mode must be connected to one VREngine board Make sure the correspondence of monitor numbers and actual monitors by using Identify button which displays the monitor numbers on actually connected monitors 4 You can t use DualView Mode on Windows NT system 5 Do not select 640x480 or 800x600 resolution at Screen Area on Windows 2000 system 6 You can t use DualView Mode on Windows 2000 system if the host system PC isn t compatible with ACPI You can confirm whether your PC is ACPI compatible or not If you can find the item ACTP Uni processor PC at Computer Device Manager Control Panel then your PC is compatible with ACPI RealVision Inc 28 VREngine MD CD Series User
9. board 3 Make sure and change the setting for the Dipswitch SW1 on the corner of the board opposite to the connectors Please see page on Configuring DIP witch Settings 4 Insert the edge connector of the board into the PCI slot slowly with care 5 Make sure if the board is inserted solidly and then fix the rear panel using the bolts removed at step 2 Make sure the board is installed properly Note If the board is not properly installed you need to remove it from the slot and install it again Do not put excessive force to install or to remove the board so that you can prevent it from causing damages to the cables connectors and the board itself RealVision Inc 9 VREngine MD CD Series User s Manual niece eee LELTTEEILIIE L 12 C mic cT cR i sia ai p PCI Bus Slot 2 M 38 s m 5 TE Li EF i 7 d Ld j EJ i zj LE NC Above photo is an example of bus slots situation in PC as host system You must install VREngine MD CD Series board s into PCI bus slot s In above example five PCI bus slots are available between AGP bus slot and ISA bus slots The order of bus slot depends on a PC which you will use and some PC doesn t have AGP or ISA bus slot s When you install only one board you can use any unused PCI bus slot When you install multiple boards you can use any unused PCI bus slot too However you may need a bus order or slot number during software driver installation and please
10. following points when you install different type of boards or connect different type of LCD monitors Make sure each board is installed to which PCI bus slot Make sure the order of board Board detection order at system boot time Make sure which board is connected to which LCD monitor By these confirmation you can make sure the relation between the dialogs Selection of Product dialog and Selection of Monitor dialog and boards Regarding 12 Selection of Product dialog and 13 Selection of Monitor dialog please refer following tables and select contents correctly About Selection of Product VREngine MD2W Using VREngine MD2W card VREngine CD3W Using VREngine CD3W card for Color display VREngine MD3W Using VREngine MD3W card for Grayscale display About Selection of Monitor VREngine MD2W Note When you use DDC compatible 2 Megapixel LCD monitor s please select 2M pixel DDC Supported Monitor and then display parameters for connected display will be set automatically DDC Display Data Channel RealVision Inc 16 VREngine MD CD Series User s Manual 14 Following wizard will appear and Current settings show the results of settings Make sure the setting contents and click Next Then actual software driver installation procedure will start InstallShield Wizard m x Start Copying Files Review settings before copying files Setup has enough information to start copying the
11. installer executes the Re Setup procedure for the product Note The 10 bit grayscale output mode is available on the product When you want to use the lookup table for Gamma correction in the board you must make valid the Gamma correction function by using application with Gamma correction API provided from RealVision This application makes it possible to use the Gamma correction function and 10 bit grayscale output Note After the setting for each mode the setting will be valid to click OK or Apply button In case of the setting for Grayscale or Multi monitor Mode the dialog box asking whether reboot or not will appear Then only reboot will make valid the new settings Note If you click Monitor Re Setup the step 4 Choose Setup Language please see page 12 of software driver installation procedure will appear Then you follow the normal procedure and you may change display colors or dot clock at the step 13 Finally the new setting will be valid by the reboot of Windows at the Step 15 RealVision Inc 24 VREngine MD CD Series User s Manual 5 2 Display Properties for Multiple board configuration Display properties when multiple boards are installed is as follows Display Properties 2 x Background Screen Saver Appearance Web Effects Settings Drag the monitor icons to match the physical arrangement of your monitors Display t Default Monitor on 3Dlabs Inc Ltd PEHMEDIAZ R5
12. not associated with RealVision Inc please consult the user s manuals or your supplier for those devices B In this manual following product specific marks are prepared and indicate that the instructions with these marks have product specific contents These contents are distinguished from products common matters Please refer this manual with this notice e VREngine MD2W board specific contents MD2W e VREngine CD3W board specific contents CD3W e VREngine MD3W board specific contents MD3W B Keep this manual as close to your computer as possible so that you can review to it in need In case of missing the manual contact your local supplier B Attach this manual to the board when you transfer it to a third person B The contents of this manual may be changed without notification RealVision Inc 2 VREngine MD CD Series User s Manual About Trade Marks B VGA is a trademark of IBM B VREngine is a trademark of RealVision BI All brand names are the property of their respective owners For Safety Use This product is designed and manufactured by taking your maximum safety into account There are however possibilities of causing severe accidents by your miss handling In order to avoid such accidents it is to be desired that you should read this manual thoroughly before using this product RealVision Inc 3 VREngine MD CD Series User s Manual Contents WV CIC ONG RR EET E CER 2 ADOUL THIS Map al
13. program files If you want to review or change any settings click Back If you are satisfied with the settings click Next to begin copying files Current Settings InstallShield 15 Following InstallShield Wizard Complete will appear and select Yes want to restart my computer now Then click Finish button Windows will restart InstallShield Wizard InstallShield Wizard Complete The InstallShield Wizard has successfully installed VREngine MD CD Series Display Driver Before you can use the program you must restart your computer C No will restart my computer later Remove any disks from their drives and then click Finish to complete setup Cancel Note When you add board s or change a PCI bus slot you need to un install see page 28 once and you need to install a software driver again RealVision Inc 17 VREngine MD CD Series User s Manual 5 Display Properties Settings 5 1 Display Properties for Single board configuration From Control Panel double click Display icon and then start Display Properties Please select Setting and click Display Properties Background Screen Saver Appearance Web Etre Select a background picture or HTML document as Wallpaper Ya Mone Browse wu Blue Lace 15 ef Boiling Point Picture Display gf Chateau Tie zj wu Coffee Bean ST Fall Memories EST ilz lT Following dialog box will app
14. us RealVision be liable for any direct indirect loss and damage arising out of or in any way connected with the use of the software The software may be changed or improved without previous notification gt Do you accept all the terms of the preceding License Agreement If you choose No the setup will close To install YREngine MD CD Series Display Driver you must accept this agreement InstallShield 8 Following Wizard will appear Make sure the setting and then click Next InstallShield Wizard xi Start Copying Files Review settings before copying files Setup has enough information to start copying the program files If you want to review or change any settings click Back IF you are satisfied with the settings click Next to begin copying files Current Settings Operating system Windows 2000 InstallShield RealVision Inc 13 VREngine MD CD Series User s Manual 9 Following dialog box will appear and then click Yes This dialog box will appear twice for Windows 2000 or once for Windows XP There appears no dialog box for Windows NT Digital Signature Not Found E x The Microsoft digital signature affirms that software has been tested with Windows and that the software has not been altered since it was tested The software you are about to install does not contain a Microsoft digital signature Therefore there is no guarantee that this software works correctly with
15. Document Number 20021106MDCD 001E VREngine MD CD Series High Resolution Display Controllers User s Manual for Windows Ver 2 0 RealVision Inc Distributed by RVU INC 50 Airport parkway 125 San Jose CA 95110 USA Tel 408 437 7771 Fax 408 437 4971 URL http www rvu inc com Copyright 2001 2002 by RealVision Inc all rights reserved VREngine MD CD Series User s Manual Welcome Thank you for choosing the VREngine MD CD Series product RealVision s high resolution display controllers that target the demands of imaging applications and support high resolution LCD monitors These boards are exclusively designed to deliver the highest quality visual image on 2 Megapixel or 3 Megapixel LCD displays These boards are PCI bus graphics boards VREngine MD CD Series has following three products lineup VREngine MD2W Color amp Grayscale Display Card for 2 Megapixel LCD Monitor VREngine CD3W Color Display Card for 3 Megapixel LCD Monitor VREngine MD3W Grayscale Display Card for 3 Megapixel LCD Monitor Regarding LCD monitor or related matters please contact your local supplier or display manufacturer About This Manual Read this manual thoroughly before you use the VREngine board B This manual provides detailed information on how to install and configure your VREngine MD CD Series high resolution display controllers For information regarding your computer monitor or other attached devices
16. Product s which has been i altered except by RealVision or by another party adhering to RealVision s instructions ii used in conjunction with another vendor s product resulting in a defect or iii damaged by improper electrical power or environment abuse misuse accident or negligence RealVision warrants to Customer that the High resolution display controller covered by the Standard High resolution display controller Warranty will be free from defects in workmanship and materials for a period of thirty six 36 months from the date of purchase For repairs after warranty period please contact your local supplier 9 About Disposing the Product To dispose the product follow your regional regulations For the detail contact your local government office RealVision Inc 36
17. ear Display Properties Background Screen Saver Appearance Web Effects Settings Drag the monitor icons to match the physical arrangement of your monitors Display t Default Monitor en 3Dlabs Inc Ltd PERME D l z M5 Colors Screen area High Color 16 bit il ees More 1024 by 758 pixels M Use thie device az the primary monitor M Extend my Windows desktop onto this monitor Identify Troubleshoot Advanced ea m RealVision Inc 18 VREngine MD CD Series User s Manual Note At above example for Display Properties second and third display icons are for the VREngine The board for the first display icon 1 indicates a graphics board that is installed into AGP bus slot or PCI bus slot or graphics adaptor on a mother board of the host system This first icon doesn t appear when only the VREngine is installed Note To support the DualView mode in Multi monitor mode virtual monitor s icon is displayed in Display Properties But usually the icon can t be selected and surrounded by a dotted line At above example for Display Properties third display icon is a virtual display Please see page 28 for details about DualView mode At above example for Display Properties newly installed VREngine can control up to two monitors but the board has not been displayed yet because of without display settings Please select the icon of monitor 2 for display sett
18. ect the language for this installation from the choices below English 5 Following message will appear and then a next wizard will appear automatically VREngineg isplay Driver an ES imta erred ra 23 PM RealVision Inc 12 VREngine MD CD Series User s Manual 6 InstallShield Wizard will appear and then click Next button InstallShield Wizard Welcome to the InstallShield Wizard for REngine MD CD Series Display Driver The InstallShield Wizard will install REngine MD CD Series Display Driver on your computer To continue click Next 7 Following Wizard will appear If you could accept the contents of License Agreement then you click Yes If you click No then the install program will terminate and the installation has not been done InstallShield Wizard License Agreement Please read the following license agreement carefully Press the PAGE DOWN key to see the rest of the agreement 1 Terms and Conditions Please install the software correctly along with procedure Please note that the software is specialized for VREngine MD and VREnaine CD and it is impossible to use it for other boards Also please note that the software is specialized only for computer that installed Windows 2000 Professional or Windows NT 4 0 workstation service pack 6 or greater 2 Limited responsibility Please install software at your own responsibility In no event shall
19. ings Display Properties Background Screen Saver Appearance Web Effects settings Drag the monitor icons to match the physical arrangement of yaur monitors Display 2 Default Monitor an YAEngine DOCO Series oe Screen area 256 Colors e More 1536 by 2048 ee Use this device as the primary monitor Extend my Windows desktop onto this monitor Identify Troubleshoot Advanced ENETN RealVision Inc 19 VREngine MD CD Series User s Manual Please click to check Extend my windows desktop onto this monitor to do settings The display icon 2 will be surrounded by a solid line as follows and then click Apply Display Properties E 2x Background Screen Saver Appearance Web Effects settings Drag the monitor icons to match the physical arrangement of your monitors Display 2 Default Monitor on YREngine MD CD Seres Z Colors Screen area 256 Colors J 2 p we 1536 by 2046 pixels 0 Athis device as the primary monitor anid my Windows desktop onto this monitor Ide Troubleshoot Advanced pg Ey UD Here the second monitor is available Third monitor will be available only when DualView mode in Multi monitor mode please see page 23 is selected Third monitor can t be selected surrounded by a dotted line at WideView mode or TwinView mode Following settings are possible for second monitor at this situation e Set
20. make sure these information before a installation 3 4 Connection with LCD Monitor s Regarding the connection with LCD monitor s please follow the instructions of manuals which is attached to LCD monitor s RealVision Inc 10 VREngine MD CD Series User s Manual 4 Software Installation Once you have completed installing the hardware and rebooted your PC you will be ready to install the software or driver The following are the procedures for installing the VREngine board driver into either Windows NT 4 0 Windows 2000 Windows XP 4 1 WindowsNT4 0 2000 XP Driver Installation Procedure 1 Start Windows NT4 0 2000 or XP and login as administrator You need administrator privileges to install drivers 2 Following the message Found New Hardware Found New Hardware Wizard is displayed Then please click Cancel button Found New Hardware Video Controller pee Maire Installing Found New Hardware Wizard Welcome to the Found New Hardware Wizard This wizard helps you install a device driver for a hardware device To continue click Next RealVision Inc 11 VREngine MD CD Series User s Manual 3 Insert the Software Driver CD ROM into the host system and refer files Please double click Setup exe icon Setup exe be attin ime cee 4 Choose Setup Language dialog box will appear and select English then click OK Choose Setup Language x Sel
21. nfiguration You can install more than one VREngine MC CD Series board into a same system Dipswitch s setting for secondary or later board s is as follows Multiple board settings ON 0 12345678 Note Above settings are applied to secondary or later board Please make sure the first board is set as grayscale mode or color mod e The maximum number of board to be installed into a same system depends on the specification of host system You need to set the VREngineMD CD Series board s as Multiple board setting when you use or need to use graphics adaptors on mother board on AGP bus or on PCI bus f you need other settings except for described above please contact your local supplier to confirm the right dipswitch setting s RealVision Inc 8 VREngine MD CD Series User s Manual 3 3 Board Installation Procedure 1 Make sure the power is turned off when you get started Turn off your computer and peripheral devices hooked to it Note The internal parts of your computer are still very hot just after the turn off Wait until everything gets enough cool and then start with the installation 2 Follow User s Manual of your computer to remove the cover 3 Follow User s Manual of your computer and install the board into open PCI slot 1 If the target slot has a dust cap remove it 2 Remove the bolts which fix the rear cover of the PCI slot The bolts removed will be used to fix the graphics
22. oard supports both grayscale and color modes and the VREngine CD3 board supports only color mode Multi head support is available through the use of multiple VREngine MD CD Series controllers using Windows 2000 Operating system or greater In order to configure for specific display settings you may need to change the dipswitch settings on your board or boards The dipswitches is located on the corner of the board opposite to the connectors as described below Dip Switch SW1 The photo of backside of board B Settings for grayscale display To display in grayscale mode using the product you will need to set the dipswitch to the following before you install the board The default factory out of box setting for the VREngine MD2W and VREngine MD3W boards are as follows respectively Grayscale display settings ON ON 1 JEL 1 II OM E E E IEL o E E NN LU 12345678 12345678 RealVision Inc T VREngine MD CD Series User s Manual B Settings for color display To display in color mode using the product you will need to set the dipswitch to the following before you install the board The default factory out of box setting for the VREngine CD3W board is as follows Color display settings Note To change the board from color display mode to grayscale mode or from grayscale mode to color mode you will require to install software driver again please see page 12 Software Installation HM Setting for multiple board co
23. omation i E xj VREngineg MDICD Series display adapter was detected display adapter is set One board case RealVision Inc 14 VREngine MD CD Series User s Manual Infomation 2 VREngine MD CD Series display adapters were detected Each display adapter is set 12 Following wizard will appear Select the installed board and then click Next Please see page 16 about Selection of product Selection of product Selection of product Please select the product of the VREngine MD CD Series Display Adapter Please select product Description VREngine MD3w Display Adapter InstallShield 13 Following wizard will appear Select the type of LCD which you connected and then click Next Selection of Monitor Selection of Monitor Please select monitor to connect Please select monitor 3M Pixels Color Monitor Tvpe l Description 3M Pixels Grayscale Monitor Typa 3M Pixels Color Monitor Type 3M Pixels Grayscale Monitor Type Setting InstallShield Cancel RealVision Inc 15 VREngine MD CD Series User s Manual Note Make sure to do settings for Selection of Product and Selection of Monitor for each board respectively when you install multiple boards into a host system In multiple board configurations there is no problem when you install same boards and same LCD monitors but you have to pay attentions to
24. on VREngine MD2W een 31 7 2 Technical Specification VREngine MD3W VREngine CD3W 33 Lo Montor Intetid6G usumsiniaiestomempien a oda pat Ru rES 35 9 Tamited VVarFablby sniga a Pc c DeL Le aria ien 36 9 JADDOIUUDISDOSdl a FTOGUOL ished nada inuasit E tU dtu a e torte odd aep btw RUE 36 RealVision Inc 4 VREngine MD CD Series User s Manual 1 Check and Save Packing Materials B Make sure that your VREngine package contains the following e Display controller board e Driver amp Installer CD ROM User s manual B Contact your local supplier if any of these items are missing B Save the box and packing materials in case you need to return the board to the supplier for any reason Shipping damage is not covered under the warranty 2 Installation Procedure Make sure the installation should be done in following steps Configuring DIP switch settings 2 Install the board into host system 3 Connection with LCD monitor s Connect interface cable s 4 Power on the host system 5 Install driver software 6 Setting for Display Properties in Control Panel 7 Reboot the host system RealVision Inc 5 VREngine MD CD Series User s Manual 3 Board Installation In this section how to install VREngine MD CD Series into your computer is described Refer to User s Manual of your computer if needed 3 1 Notices for Board Installation It is recommended to ask your vend
25. or to install the VREngine MD CD Series into your computer Do not touch connectors pins of IC LSI and patterns on the board directly as the electronics devices used may be damaged by electro static discharge Clean your hands before installing the board in order to avoid dangers of possible slippage caused by stains or oil stuck to your hands Keep the remaining parts not used at your installation as they may be to use next installation later on Make sure if there are no any damages deformations rubbish or stains on connectors connector pins and contacts before doing connection These defects might be the root cause of short circuits that also might result a fire Be careful in handling the connectors to prevent them from dropping down onto or dragging on the floor so that the connectors are kept clean and no damages Secure the bolts and nuts fastened enough so that dropouts looseness of bolts can be prevented Otherwise short amp open circuits may occur Do not step on or put a heavy body on or add intense heat to the cables To remove the cables unfasten the locks and then pull out straightly by grabbing the connectors Putting mechanical stresses adding intense heat to the cables or prying the connectors may cause damages to the cables and connectors and then result in a fire by a short circuit RealVision Inc 6 VREngine MD CD Series User s Manual 3 2 Configuring DIP Switch Settings The VREngine MD2 MD3 b
26. s can be displayed with 2 x of in horizontal amp Vertical sizes RealVision Inc 32 VREngine MD CD Series User s Manual 7 2 Technical Specification VREngine MD3W CD3W MD3W cb3W Operating Conditions Host system DOS V compatibles Operating systems Windows NT 4 0 Workstation ServicePack 6 or greater Windows 2000 Professional Windows XP PCI Version2 2 compliant Mechanical Spec Board size Outline 174 5 W x 106 7 H mm or 7 1 W x 4 2 H inch Weight 158g 0 34lbs of occupied slot PCI bus slot x1 1536 x 2048 pixel Portrait Dual head case 4096 x 1536 pixel Landscape e Note 1 3M 65MHz Dotclk digital LCD monitor Display Mode Landscape Portrait Landscape Landscape MD3W only Portrait Portrait ote 3 Screen of display bits 8 bit pixel grayscale 10 bit pixel grayscale Integrated Gamma table can select 256 scales from 1024 scales 6 24 bit pixel color ae of connectable Max 2 monitors MD3W only monitors Video Output Std DVI Digital Visual Interface Video Output Spec Cetificain ULeULFCC CE Operating 0 45 C 32 113F Temperature RealVision Inc 33 VREngine MD CD Series User s Manual Condition for Temp amp Humidity 40 75 C 40 167F preservation 5 100 None condensing Altitude Lower than 11 000m 36 000ft Note 1 Display mode specifications 1536 2048 4 r 1536 2048 Landscape display Por
27. ser s Manual Setting for Grayscale Mode MD2W MD3W Please see page 26 for details Default Monitor and Real ision Inc REngine MD CD Series i 7l x General Adapter Monitor Troubleshooting Color Management VAR Engine MD CD Seres Diode Setup Display Adapter Ho DISPLAY Transfer IvIode Block Mode Nonlinear Static Gra Linear Static Gray Wide View Mode Doritor Re Setup Setting for Multi monitor Mode MD2W MD3W Please see page 24 for details Default Monitor and Real ision Inc VREngine MD ED S General Adapter Monitor Troubleshooting Color Management VHEnaine MD LD Series Mode Setup Display Adapter Ho DISPLAY 1 Grayscale Iode Transfer Mode Linear Static Gray Block Mode hi Multi Morator vode Wide View Mlode Wide ew IvInde LaalView Made TwinView Mode Monitor Re Setup e ow RealVision Inc 23 VREngine MD CD Series User s Manual Setting for Transfer Mode Please see page 26 for details Default Monitor and Real ision Inc REngine MD CD E at General Adapter Monitor Troubleshooting Color Management VR Engine MD CD Senes IWlode Setup Display Adapter Ho DISPLAY 1 Grayscale Mode Linear Static Gray Malti IvIorator Iode Wide View Mlode Motor Re Setup After the new settings for each mode click Monitor Re setup button then the
28. ting for display colors Colors You can select display colors for color monitor s from 256 colors High Color 16 bit colors or True Color 32 bit colors In case of Grayscale monitor s only 256 colors 256 scales can be selected e Setting for display resolution Screen Area You can change the resolution of display or landscape portrait setting e Moving into advanced setting mode Advanced You can move into advanced setting mode and set following three display modes Grayscale Mode Multi monitor Mode Transfer Mode RealVision Inc 20 VREngine MD CD Series User s Manual Virtual Monitor Please see page 28 Settings Display Properties Background Screen Saver Appearance Web Effect Drag the monitor icons to match the physical arrangement af your monitors ES Im Pl ELLA Display 2 Default Monitor on VREngine MD CO Seres Colors Screen area 256 Colors ene H More 1536 by 2048 pixels Use thig device as the primary monitor M Extend my Windows desktop onto this monitor Identify Troubleshoot d cancel e Setting for Setting for Move into display display Advanced colors resolution setting mode Note Please note following points when use grayscale mode with WindowsXP In WindowsXP operating system 256 colors is not normally supported and you can t set 256 color mode by Color s tab in Display Properties Please set as follows to set 256
29. trait display 3072 4096 2048 1536 MD3W Multi monitor Mode mE Em MD3W DualView Mode only RealVision Inc 34 VREngine MD CD Series User s Manual 3 Monitor Interface DVI connector 2 DVI connector 1 Pin Location 1 8 GT C2 265 ie 24 C3 C4 Digital Analog Interface Interface T M D S Data2 9 T M D S Data 1 T M D S Data 0 T M D S Data 2 T M D S Data 1 T M D S Data 0 Shield Shield DDCClock 14 5V Power 22 T M D S Clock Shield 7 DDC Data 15 Ground 23 T M D S Clock return for 5V HSync and Vsync 8 Back Light ON T M D S Clock C EN MEET RealVision Inc 35 VREngine MD CD Series User s Manual 8 Limited Warranty RealVisions Standard high resolution display controller Warranty and Customer s sole and exclusive remedies for such warranties are specified below REALVISION S WARRANTIES STATED IN THIS SECTION ARE IN LIEU OF ALL OTHER WARRANTIES EXPRESSED IMPLIED OR STATUTORY INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE No statement including without limitation representations regarding capacity suitability for use or performance of Product s whether made by RealVision employees or otherwise shall be deemed to be a warranty by RealVision for any purpose or give rise to any liability of RealVision unless expressly contained in this Warranty The warranties in this section do not apply to any
Download Pdf Manuals
Related Search
MDCDWinUsersManual_2.0