Home

Untitled

1. VIDEO 2 Composite video inputs RCA Connector 750 1Vp p RF Antenna or CATV Input F Connector 750 AUDIO 1 Stereo audio outputs RCA Connector 8dbm 1 5KO AUDIO DVD only 1 Digital audio output t coaxial 1 pair Stereo audio outputs Outputs VIDEO 1 Composite video output RCA Connector 750 1Vp p VIDEO DVD only 1 8 Video output S Connectar 750 Y 1 0Vp p C 0 286Vp p 1 Component video output 750 Y 1 0Vp p Pb 0 7Vp p Pr 0 7Vp p RF Channel 3 or 4 VIDEO SYSTEM 1 ineh VHS system 4 rotary head helical scanning FM azimuth luminance chrominance converted sub system phase shift AUDIO TRACK Normal 1 track Hi Fi 2 track PLAY RECORD TIME T 180 tape SP 3 hours SLP 9 hours VCR FF REW TIME T 120 tape lt 2 minutes HEADS Video DA 4 rotary Audio 2 rotary heads Hi Fi 1 stationary head Linear Control 1 stationary head Erase 1 full track 1 audio track WOW amp FLUTTER Less than 0 005 Hi Fi FREQ RESPONSE 20 20 000 Hz Hi Fi DISC COMPATIBILITY CD CD R CD RW DVD Video CD Digital Audio 5 and 3 5 DvD FREQ RESPONSE 96 48 kHz Sampling 4 Hz 22kHz S N RATIO 110 dB DYNAMIC RANGE 96 dB THD 0 003 POWER REQUIREMENT 120V AC 60 Hz 25 watts SYSTEM ENVIRONMENT 44 104 F 5 40 C 10 75 humidity WEIGHT 13 8 Ibs Samsung Electronics Co Lid reserves the right to chan
2. a se ms i Q soss co SAFETY INSTRUCTIONS Safety Instructions CAUTION This symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the product s risk of fire or electric shock to persons This symbol is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL RISK OF ELECTRIC SHOCK enclosure that may be of sufficient magnitude to constitute a DO NOT OPEN Note to CATV system installer This reminder is provided to call CATV system installer s attention to Article 820 40 of the National Electrical Code Section 54 of Canadian Electrical Code Part that provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical Caution FCC regulations state that any unauthorized changes or modifications to this equipment may void the user s authority to operate it Caution To prevent electric shock match wide blade of plug to wide slot fully insert Attention Pour eviter les chocs
3. The VCR does not play sound while a video tape is paused If you see white lines on the screen see Using Automatic Tracking on page 65 3 Pausing Play While a tape is playing press the 4 Play Pause button when you want to interrupt play The tape pauses temporarily Press the il Play Pause button to resume playing the tape ENG 63 VCR OPERATIONS Special VCR Playback Features While a videotape is playing you can enjoy a variety of special playback features including Still Frame Advance Skip Repeat and more Press the Play Pause button again to resume normal playback Frame Advance a a E In the pause mode press O F ADV to advance to the next F ae frame ng a Fps Rps Review in Play mode press the p gt Forward or a Rewind fo AGN AD review at two speeds OCHO Picture Search Press and R LIQ release to advance the tape KGA ZEEN ey forward or backward al 5 times normal speed Jet Search Press and hold down the SEARCH button then release it to play back at the normal speed Skip Qe ey ee in Play mode press the SKIP aun Go 00 button to move ahead exactly 20 OE 30 seconds Press the SKIP iN a button repeatedly up to 4 times ong aG to move ahead 2 minutes i OH x FA IR ok Hey ae Repeat In Play mode press the REPEAT button to review the last 5 seconds of tape SP mode in Play mode p
4. button on the front panel ies 360 2 Place a disc gently into the tray with the disc s label facing up 3 Press the a Play Pause button on your remote control or on the front panel Most discs will start to play back as soon as the tray closes at Stop Resume Press the m Stop button once to 4 Stopping Play stop playback To resume he DVD CD from the point where the Press the m Stop PUG disc stopped press the ma during play Play Pause button Press the m Stop button twice to completely stop playback The next time you press the mu Play Pause the disc will start over from the beginning ENG 29 DVD OPERATIONS 5 Removing Disc Press the OPEN CLOSE button on the front panel i a Screen stops no sound To resume press the mil Play Pause button once again 6 Pausing Play Press the wal Play Pause button on your remote control or on the front panel during play Note if the player is left for about 5 minutes in pause mode it will stop ai Each time the button is pressed a new frame will appear No sound is heard during STEP mode Press the ml Play Pause button to resume normal play You can only perform step motion play in the forward direction 7 Step Motion Play Except CD Press the FADV button on the remote control during play d No sound is heard during slow mode Press the u Pl
5. 4 To make the DVD setup screen disappear after setting up ress the MENU button again pi e MENU button again Note Depending on the disc some DVD Setup menu selections may not work ENG 52 DVD OPERATIONS Setting Up the Language Features if you set the there is no player menu on the osd disc menu audio and subtitle language in advance they will come up automatically every time you watch a movie 1 AI With the unit in Stop mode Z press the MENU button on the remote control Press the buttons to nn ee select DVD then press ine oo or ENTER button a Press the A buttons to ii Sage select Language then press the or ENTER button 4 Press the A V buttons to select the desired item then press the or ENTER button a The language is selected and the screen returns to Language Setup menu To make the DVD Setup menu disappear press the MENU button 5 Press the A F buttons to select the desired language then press the or ENTE button os aoe ENG 53 DVD OPERATIONS Language Function Disc Menu To set the Disc Menu Language to your preferred language follow these steps If your preferred language is available on a DVD your Disc Menu Language will automatically be set to the language you choose Audio To set ihe Audio Language to your preferred language follow these steps If your prefer
6. Method 1 Antenna DVD VCR TV No Cable box e Method 2 Antenna Cable box DVD VCR TV Cable box with many scrambled channels e Method 3 Antenna DVD VCR Cable box TV Cable box with a few scrambled channels f you are using an off air antenna that has 300 ohm twin flat leads use an external antenna connector 300 75 ohm adaptor not supplied to connect the antenna to the DVD VCR f you have two separate antennas one VHF and the other UHF use a UHF VHF combiner adaptor available at most electronics shops to connect the antenna to the DVD VCR The RF OUT TO TV jack of this product sends signals received through the antenna and output Audio Video signals Methodi Antenna DVD VCR TV No Cable box You can record non scrambled channels by selecting the channel on the DVD VCR Also use this Method if you watch channels without cable box To RF IN To RF OUT Antenna cable To Antenna Input ENG 11 CONNECTIONS Method2 Antenna DVD VCR TV Cable box with many scrambled channels BK Wall You can record channels by selecting the channel on the cable box You cannot record one channel 2 while watching another channel Be sure that the i VBS cable box is turned on To RF IN fi To RF OUT Antenna cable To Antenna Input Methoda Antenna DVD VCR TV Cab
7. Adjusting the Aspect Ratio EZ View TREE selecting NeAUdIO Language e o e a AR ae HAY alda a va i Selecting the Subtitle Language Changing the Camera Angle Using the Bookmark FUNCION iaa en A a oh a TA AA ES ts A ETNA Using the Zoom Function DVD a Clips Menu for MPSAWMAISPEG occ ccc err 46 PolderSelection arki aga il la easiness wimax A RA nase neue a 46 PSIWMAPlAVO ACK aaa essa ld titra a ad saa saa a an steig sni sala iia ll sa ni a lr 47 Program Play 8 Random Playa arsen AAA ies nan anne ae 49 Picture CD Playback 50 Using the Setup Menu arog Setting Up the Language Features 308 Setting Up the Audio OplONS 0223 gn tiene AL ire liars engi ane 55 SENS UP Me Display ODOM Sete cacy ac td AIAG Mag an E ari 57 settiig Uosthe ParentanGontol nanna a ln al aia ng lh ses ln 59 Chapter 5 VCR Operations Inserting and Ejecting a Video Cassette Tape eranrr rare 62 Playing a Pre Recorded Video Cassette Tape 0 nr 63 special VCR Playback Features eraann iiaii na san A RA A fa 64 USING AULOMANC EFACKING 2 3 safnar Lat paa a E Ea a goose eel an A ga ie IG Eie Selecting the Cassette Type i Seting NE AULO PAY sin ristar ni ri N i aaa i oa eg a a Dries Setting he Auto Repeat nenn orane a A EAT pase EA EN E a Using the Tape COUMEN onor p arn aaa A NA Sas a Using the Assemble Edit Function Selecting the Audio
8. 5 The unit enters slide show mode Before beginning the Slide Show the picture interval must be set A When this icon is selected and ENTER is pressed the pictures change automatically with about a 6 second interval The pictures change automatically with about a 12 second interval i The pictures change automatically with about a 18 second interval Notes Depending on a file size the amount of time between each picture may be different from the set interval time lf you don t press any button the slide show will start automatically in about 10 seconds by default ENG 50 DVD OPERATIONS CD R JPEG Discs Only files with the jpg and JPG extensions can be played lf the disc is not closed it will take longer to start playing and not ail of the recorded files may be played Only CD R discs with JPEG files in 190 9660 or Joliet format can be played The name of the JPEG file may not be longer than 8 characters and should contain no blank spaces or special characters Only a consecutively written multi session disc can be played If there is a blank segment in the multi session disc the disc can be played only up to the blank segment Amaximum of 3000 images can be stored on a single CD Kodak Picture CDs are recommended When playing a Kodak Picture CD only the JPEG files in the pictures folder can be played Kodak Picture CD The JPEG files in the pictures f
9. 6 Press the A F buttons fo select Time Zone then press the or ENTER button Select the time zone of your area by using the A F lt 4 buttons ul then press the ENTER button Select Automatic to set the time zone automatically FE Press the A W buttons to select Daylight Saving then press the gt or ENTER button to select Yes No or Auto 8 Press the MENU button to exit Note if your clock is set to the wrong Time Zone or Daylight Saving you can adjust these settings without turning off the Auto Clock Set function Setting the Clock Manually If Auto Setup fails to set the DVD VCR s internal clock by locating a local TV station follow these steps to set the data and time manually Note For accurate Timer Recording your DVD VCR s internal clock must be set correctly 1 Press the MENU button ENG 22 INITIAL SETUP Press the a buttons to select Setup then press the P Or ENTER button Press the A V buttons to select Clock then press the gt or ENTER button 4 Press the A T buttons to select Manual Clock then press the or ENTER button 5 Use the lt gt buttons io select each of the following options then use the A F buttons to set each option Press the ENTER button to set the clock nt Z Press the MENU button to exit ENG 23 INITIAL SETUP Memorizing the Channels Selecting the Video Signal source
10. 4 hours The DVD VCR stops recording automatically when the time has elapsed The DVD VCR will automatically be turned off when the OTR finished Selecting the Recording Speed You can slow down the recording speed from SP to SLP in order to fit six hours of programming on a T 120 tape Nate wae Qa The selected Record Speed will appear on p the front panel display and on screen display Press the SPEED button on the remote control io select the Record Speed SP Standard Play for best gt quality SLP Super Long Play for maximum recording time 3 times SP Maximum Recording Time SP vs SLP Tape Length SP Standard Play SLP Super Long Play T 120 2 hts 6 hrs T 160 2hrs 40 mins 8 hrs 7 180 3 hrs 9 hrs ENG 77 VCR OPERATIONS Using a Timer Recording Insert a blank videotape into the VCR deck Be sure to leave the Record Safety Tab intact With the Timer Recording function you can program up to 7 events at a time to record up tc a month in advance To Begin Setting the Timer Recording Power On your DVD VCR Power On your TV 1 Press the MENU button on the remote control 2 Press the buttons to select PROG then press the r or ENTER button it can be displayed simply by pressing the TIMER button 3 Select Channel Number Press the button then press the A buttons to set the channel Press the button to move to the next s
11. Connection to an Audio System 2 Channel Amplifier ceece cece ceseeeeeeeeeeseseesesestaeees 7 Connection to an Audio System Dolby digital MPEG2 or DTS Amplifier eee 18 Connecting a Power Cord amp Auto S lUp coat Aa fe a aa RN bo 19 Chapter 3 Initial Setup deleting a Menu Langu sn ah aclu Mkts cancel een de ted lls at ll a a atid 20 SMO 0306 lE SN I GRA saa ER lt et Setting the Clock Automatically Setting the Clock Manually Memorizing the Channel 24 Selecting the Video Signal sourCe eenias nnd re ae iena aeiee rah Nadanie ripen rena 24 Storing Channels in Memory Automatic Method neneeeseesesneneceeesesessaeetees 25 Adding and Erasing Channels Manual Method o oo cee cients 25 selecting ihe RF OU ULENANNI trenc vie MA BR eae eden mune 26 selecting the Front Panel DISMAY esi joan eisini okt a e a detect a a undoes 27 Seting he Power Off Automatically osesssvs demonii A KA A aga a i 28 ENG 4 TABLE OF CONTENTS Chapter 4 DVD Operations Playing DISC as agna pects i eens tis oa ase en a aa nae eben Using the Search and Skip Functions Using the Display Function Using the Disc and Title Menu DVD Using the Function Menu DYB inea gati slate a ded unin aie alas Repeat Play atti i Bari ace Grecian anne dice ae alae ce pe ee rare Slow Repeat Play asta a a Ata dane tibiae AAN a nahin aga a
12. For 4 3 aspect ratio discs NORMAL WIDE Displays the content of the DVD title in 16 9 aspect ratio The picture will look horizontally stretched SCREEN FIT The top and bottom portions of the screen are cut off and the full screen appears The picture will look vertically stretched ZOOM FIT The top bottom left and right portions of the screen are cut off and the central portion of the screen is enlarged VERTICAL FIT When a 4 3 DVD is viewed on a 16 9 TV black bars will appear al the left and right of the screen in order to prevent the picture from looking horizontally stretched ENG 39 DVD OPERATIONS If you are using a 4 3 TV For 16 9 aspect ratio discs 4 3 Letter Box Displays the content of the DVD title in 16 9 aspect ratio The black bars will appear at the top and bottom of the screen 4 3 Pan Scan The left and right portions of the screen are cut off and the central portion of the 16 9 screen is displayed 8 SCREEN FIT The top and bottom portions of the screen are cut off and a full screen appears The picture will look vertically stretched ZOOM FIT The top bottom left and right of the screen are cut off and the central portion of the screen is enlarged Note For 4 3 aspect ratio discs NORMAL SCREEN Displays the content of the DVD title in 4 3 aspect ratio SCREEN FIT The top and bottom portions of the screen are cut off and the full screen appears The pictu
13. Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories DTS and DTS Digital Out are trademarks of Digital Theater Systems Inc Note There is no analog audio output when you play a DTS sound disc lt Dynamic compression restrains the dynamic range of the sound i e the difference between the loud and quiet passages of a DVD audio track This is useful when watching a DVD late at night Note Even when PCM Down sampling is Off some discs will only output down sampled audio through the digital outputs DVD OPERATIONS Setting Up the Display Options Display options enable you to set various video functions of the player With the unit in Stop mode iz press the MENU button on the remote control Press the A V buttons to A select DVD then press the gt or ENTER button 3 7 MAA M Press the A buttons to e select Display then press the or ENTER button To make the DVD Setup menu disappear press the MENU button 4 Press the A F buttons to select the desired item then press the or ENTER button ES ENG 57 DVD OPERATIONS Display Options TV Aspect Depending on the type of television you have you may want to adjust the screen setting aspect ratio 4 3 Letter Box Select when you want to see the total 16 9 ratio screen DVD supplies even
14. Once you select point A B i will be selected Note The minimum A B Repeat time is 5 seconds 4 ce Mark the Ending Point Press the ENTER button again at the end of the segment you want to repeat Point B nvr The segment will begin repeating in a continuous 0 loop Be i 5 ha DVD Cancel A B Repeat Press the REPEAT button then press the lt gt buttons to select Off and press gt ENTER button ENG 37 DVD OPERATIONS Slow Repeat Play This feature allows you to slowly to repeat scenes containing sports dancing musical instruments being played ete so you can study them more closely When playing a DVD eae FAISKIP During play press the FAN ar pit Play Pause button e 2 Press and hold the p nF Forward button to choose the So ac play speed between 1 8 1 4 ow and 1 2 of normal during PAUSE or STEP mode 3 Press the REPEAT button on the remote control Press the d buttons to select A E To set A B repeat set A first then set B after the following slow play time has elapsed 1 8x wait 40 seconds then press B 1 4x wait 20 seconds then press B 1 2x wait 10 seconds then press B A oe Press the ENTER button at the point where you want gt repeat play to start A B is automatically selected Press the ENTER button at the point where you want the repeat play to stop B 5 To return to normal play
15. an RF cable i When you watching through the Antenna input during recording press the TV VCR bution on the remote control Using your TV remote control change the channel you want to watch When you watching through Line input during recording change the input of your TV from Line io Antenna Using your TV remote control change the channel you want to watch ENG 75 VCR OPERATIONS To Watch a DVD while Recording Insert a DVD in the DVD tray and press the m4 Play Pause The output will automatically change to the DVD To Add Recording Time See One Touch Recording OTR below Using One Touch Recording One Touch Recording OTR allows you to add recording time in 30 minute increments up to 4 hours at the touch of a button 1 insert a blank VHS tape into the VCR deck 2 Use the Number buttons or the CH 4 or buttons to select the desired channel or press the INPUT SEL bution to select Line 1 or 2 if recording from an external device connected tothe front or rear jacks respectively 3 Press the REC button on the remote control or front panel ENG 76 VCR OPERATIONS 4 While in Record mode press the REC button again to activate One Touch Recording OTR Record length 0 30 appears on the On screen display and the DVD VCR will record for exacily 30 minutes 5 Add Recording Time Continue pressing REC button to add recording time in 30 minute increments up to
16. 5 DIGITAL AUDIO IN eo Dolby digital or DTS Amp Press the input select button of the Amplifier to select external input in order to hear sound from the DVD VCR Refer to your Amplifier s user manual to set the Amplifier s audio input Notes When you connect the DVD VCR to DTS Amplifier and play a DTS disc set the DTS to Gn in Audio Setup menu If itis set to Off sound will not be heard or there wilf be a loud sound Please turn the volume down when you turn on the Amplifier Sudden loud sound may cause damage to the speakers and your ears Please set the audio in the menu screen according to the Amplifier See pages 55 to 56 The position of terminals may vary depending on the Amplifier Please refer to the user s manual of the Amplifier ENG 18 CONNECTIONS Connecting a Power Cord amp Auto Setup 1 Your DVD VCR s power cord should be plugged into a standard 120V 60Hz wall outlet Avoid pressing any buttons on the remote control or on the unit during Auto Setup While your DVD VCR is running Auto Setup Auto will blink When Auto Selup is complete the current time will be displayed onthe front panel if Auto Setup fails to locate a channel to set the clock you should set You must have the anttenna the clock manually See page 22 to 23 connected to set the Auto Clock 2 a You must have the anttenna connected to set Turn on the power by pressing the POWER the Auto Clock See pages 11 12
17. A F buttons to select one of the five functions Info Then press the or ENTER MARK button to access the function REPEAT ENG 35 DVD OPERATIONS Repeat Play Repeat the current track chapter title a chosen section A B of all of the disc When playing a DVD CD During play press the REPEAT button on the remote control Repeal screen appears a DVD repeats play by chapter or title and CD repeats play by track or disc 2 Press the d P buttons to Chapter repeats the chapter that is select Chapter Title or A B playing l l then press the ENTER gt Title repeats the title that is playing button Track repeats the track that is playing Disc repeats the disc that is playing A B repeats a segment of the disc that you select 3 Las DVD To return fo normal play press the REPEAT button again then press the 4 gt buttons to select Off and press ENTER button it s available to press the CLEAR button in order to stop repeat play Note Depending on a disc the Repeat function may not work ENG 36 DVD OPERATIONS Using the A B Repeat function TX SRS Rey During play press the REPEAT d A button on the remote control Repeat screen appears 2 i DVD Press the lt gt buttons to select A ee ao VD a Mark the Starting Point Press the ENTER button at the beginning of the segment you want to repeat Point A cD
18. DOES NOT WARRANT UNINTERRUPTED OR ERROR FREE OPERATION OF THE PRODUCT All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG Replacement parts and products assume the remaining original warranty or ninety 90 days whichever is longer This limited warranty covers manufacturing defects in materials and workmanship encountered in normal noncommercial use of this product and shall not apply to the following including but not limited to damage which occurs in shipment applications and uses for which this product was not intended failures or problems which are caused by products or equipment not supplied by SAMSUNG accidents misuse abuse neglect misapplication fire water lightning or other acts of nature incorrect electrical line voltage fluctuations or surges damage caused by improper or faulty installation improper connection with any peripheral product alteration or modification improper or unauthorized repair cosmetic damage or exterior finish product with altered serial numbers failure to follow operating instructions customer adjustments maintenance and environmental instructions that are covered and prescribed in the instruction book use of non SAMSUNG or unauthorized parts supplies accessories or equipment which damage this product or result in service problems failures or problems due to incompatibility with other equipment a ELECTRONICS HEADQUART 105 Challenger
19. Search missed a channel that you would like to add delete a channel you wish to remove 6 Press the A F buttons to select Channel Add Delete then press the or ENTER button T r Press the CH A V buttons to Ba pa tune in the channel number you wish to add or delele and press P to ADD Use the number button to presa Qia DELETE select the channel directly RETURN CH AV 3 ied ADDDELETE Press the 4 or button to Select channel 07 in memory delete the channel from your channel list or to add ang press P to ADD Repeat steps 7 to add or ee to delete additional channels RETURN TE Note Use the number button to move the channel Press the MENU bution to exit directly ENG 25 INITIAL SETUP Selecting the RF Output Channel Use this feature if DVD VCR is connected to TV using RF antenna cable a ee SOB CRIA Press the MENU button D a Press the A buttons to select Setup then press the P or ENTER button 3 Press the buttons to select Channel then press th bor ENTER button 4 Press the amp buttons to select RF Output CH then press the or ENTER button to select 3CH or 4CH ae Press the MENU button to exit ENG 26 INITIAL SETUP Selecting the Front Panel Display You can set the Front Panel Display to be bright all the time dim all the time or to automatically dim during power off 1 Press the MENU button 2 Press the
20. This feature allows you to manually set ihe DVD VCR s tuner band to Antenna or Cable whichever you connected to the Antenna In jack during initial setup Use this setting only if Auto Setup detected the incorrect tuner band i e channels are coming in on the wrong channel numbers 1 Press the MENU bution Press the A buttons to select Setup then press the or ENTER button 3 Press the buttons to select Channel then press th or ENTER button ai Antenna Select this if the DVD VCR is connected to an indoor or outdoor VHF UHF antenna Cable TV Select this if the DVD VCR is connected to Cable TV Press the or ENTER button to select Antenna or Cable TV IS ENG 24 INITIAL SETUP Storing Channels in Memory Automatic Method Auto Channel Memory will automatically seek and store all active channels in your area 5 Press the a buttons to select Auto Channel Memory then press the or ENTER button The DVD VCR will tse ttl automatically search for all we available channels in the e selected tuner band Co a This procedure may take a few o mn minutes to complete a hee a Do not turn the power off when Auto When finished the lowest a a Channel Memory function is proceeding channel found will be if the power is off Auto Channel Memory displayed should be reset Adding and Erasing Channels Manual Method Use this feature if Auto Channel
21. button on the remote control or on the front panel 3 Turn on your TV by pressing the POWER button on the TV remote control ENG 19 Chapter 3 INITIAL SETUP Selecting a Menu Language To change the on screen MENU language to English French or Spanish follow these steps 1 Press the MENU button 2 Press the amp buttons to select Setup then press the or ENTER button 3 Press the buttons to select Language then press the or ENTER button BA Press the A buttons to select the appropriate language English Francais or Espa ol Press the ENTER button 5 Press the MENU button to exit ENG 20 INITIAL SETUP Setting the Clock This menu is used to set the current time You need to set the time to use timer recording Setting the Clock Automatically 1 Press the MENU button Press the A V buttons to select Setup then press the or ENTER button 3 Press the A F buttons to select Clock then press the or ENTER button Notes You must have the antenna connected to set the Auto Clock See pages 11 12 The Clock will be automatically set when you turn off the DVD VCR Press the A buttons to select Auto Clock then press the or ENTER button 5 Selecl a channel that carries a time signal by using the or ENTER button Auto 1 2 125 ENG 21 INITIAL SETUP
22. disc hasa a Menu Play mode differs Some of the functions selected in the Setup Menu may not work from the Setup properly if the disc is not encoded with the corresponding Menu selection function The screen ratio The Screen Ratio is fixed on your DVDs cannot be changed Make sure you have selected the correct Digital Output in the No audio Audio Options Menu ENG 80 GE 7 The screen is Press the button for more than 5 seconds with no disc in blocked the unit All settings will revert to the factory settings Press the from a cold start with no disc in unit press the lt p gt Fargot password button simultaneously on the front panel for 5 seconds All settings including the password will revert to the factory settings Don t use this unless absolutely necessary if you experience lt Go to the contents and find the section of the instruction book other problems that contains the explanations regarding the current problem and follow the procedure once again if the problem still cannot be solved please contact your nearest authorised service center The picture is Make sure that the disc is not dirty or scratched noisy or distorted Clean the disc identifying VCR Problems Problem Action No power Check that the power plug is connected to a wall outlet You cannot insert TA video cassette can only be inserted with the window a is cassette side up and the safety tab facin
23. disc to play if the codes do nat match the disc will DOLBY DIGITAL Dolby Digital disc not play The Region Number for this player is STEREO Stereo disc DIGITAL SOUND Digital Audio disc DTS disc MP3 disc You must only insert one DVD disc at a time Inserting two or more discs will not allow playback and may cause damage to the DVD VCR ENG 7 described on the rear panel of the player SETUP Description Front Panel Controls 1 DISC TRAY 9 bP Forward Fast Forward Place the disc here Press to forward fast forward a dise videotape 2 OPEN CLOSE 10 REC VCR Press to open and close the disc tray Press to begin recording 3 VCR Deck 11 EZ VIEW Insert a standard VHS video tape The aspect ratio of a picture can easily be 4 EJECT adjusted to your TV s screen size Press to eject a video tape if the tape is stopped 142 Front Panel Display 5 POWER Operation indicators are displayed here Press to tum the DVD VCR on and off 18 CHANNEL Vand A 6 dd Reverse Rewind Press to change channels Press to reverse rewind a disc video tape 14 DVDAVCR 7 STOP Press to view DVD or VCR mode Press to stop a disc video tape during playback 15 PSCAN of record VCR Press to select video out mode 8 pil Play Pause 16 LINEIN2 Press to play or pause the disc v
24. down 1 or backwards Hold the video cassette tape 4 A Use only video tapes labeled VHS window side up with the arrow lt 4 European FAL VHS video tapes and pointing away from you S VHS pre recorded tapes aren t compatible with this unit Choose brand name high quality tapes for best results a Ifthe safety tab of your video tape 2 has been removed the tape begins Gently push the tape through to play automatically You don t have the compartment door until you to press PLAY For more information feel the VCR pull it on the safety tab see page 74 The VCR loads the tape automatically io To Eject a Video Cassette Tape When you re finished playing a pre 1 recorded video tape it s best to rewind it Press the g Stop button to to the beginning and remove it from the stop playing the tape 3 D n VCR to protect it from wear and tear a After ejecting a tape you should remove it completely from the compartment and turn off the VCR 2 Press the EJECT button on the front panel to eject the tape ENG 62 VCR OPERATIONS Playing a Pre Recorded Video Cassette Tape Playing the Tape a For more information on the safety 1 tab see page 74 Insert the video cassette tape e y gt qa FA SKI nn lf the tape doesn t begin to play ae Z automatically press the mal SOH Play Pause button mee
25. electriques introduire la lame le plus large de la fiche dans la borne correspondante de la prise et pousser jusqu au fond Important One Federal Court has held that unauthorized recording of copyrighted TV programs is an infringement of U S copyright laws Certain Canadian programs may be copyrighted and any unauthorized recording in whole or in part may be a violation of these rights To prevent damage which may result in fire or electric shock hazard do not expose this appliance to rain or moisture Important Safety Instructions Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong is provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where the
26. information A clear description of the problem Then contact your nearest SAMSUNG service center Identifying DVD Problems Check the batteries in the remote control No operations can They may need replacing i be performed with Operate the remote control at a distance of no more than 20 feet the remote control Remove batteries and hold down one or more buttons for several minutes to drain the microprocessor inside the remote control to reset it Reinstall batteries and try to operate the remote control again Ensure that the dise is installed with the label side facing up Sa the ted ion number of the DYD 5 1 channel sound i is reproduced only when the fol lowing conditions are met 1 The DVD VCR is connected with the proper Amplifier 2 The disc is recorded with 5 1 channel sound Check whether the disc being played has the 5 1 ch mark on the outside Check if your audio system is connected and working properly i a DVD Setup Menu is the Audio Output set to Bitstream Disc does not play 5 4 channel sound is not being reproduced The features or action cannot be completed at this time because The icon The DVD s software restricts it appears on 2 The DVD s software doesnt support the feature e g angles screen 3 The feature is not available at the moment 4 You ve requested a title or chapter number or search time that is out a tange appeal Check if the
27. layer CDGs play audio only not graphics DVD RW VR mode Non finalizing DVD RW R DVD RW and R disc a Ability to play back may depend on recording conditions DVD RW R CD RW DVD RW R CD ROM Note This product incorporates copyright protection technology that is protected by U S patents and other intellectual property rights Use of this copyright protection technology must be authorized by Macrovision and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Reverse engineering or disassembly is prohibited COPY PROTECTION Many DVD discs are encoded with copy protection Because of this you should only connect your DVD VCR directly to your TV not to a VCR Connecting to a VCR results in a distorted picture from copy protected DVD discs This product incorporates copyright protection technology that is protected by methods claims of certain U S patents and other intellectual property rights owned by Macrovision Corporation and other rights owners Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation Reverse engineering or disassembly is prohibited PROGRESSIVE SCAN OUTPUTS 525p CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAU
28. make sure that you use 8 characters or less have no spaces in the name and avoid the use of special characters including 4 Use a decompression transfer rate of at least 128 Kbps when recording MP3 files Sound quality with MP3 files basically depends on the rate of compression decompression you choose Getting CD audio sound requires an analog digital sampling rate that is conversion to MP3 format of at least 128 Kops and up to 160 Kbps However choosing higher rates like 192 Kbps or more only rarely give better sound quality Conversely files with decompression rates below 128 Kbps will not be played properly Use a decompression transfer rate of at least 64Kbps when recording WMA files Sound quality with WMA files basically depends on the rate of compression decompression you choose Getting CD audio sound requires an analog digital sampling rate that is conversion to WMA format of at least 64kbps and up to 192Kbps Conversely files with decompression rates below 64Kbps or over 192Kbps will not be played properly so Do not try recording copyright protected MP3 files Certain secured files are encrypted and code protected to prevent illegal copying These files are of the following types Windows MediaTM registered trade mark of Microsoft Inc and SDMITM registered trade mark of The SDMI Foundation You cannot copy such files important The above recommendations cannot be taken as a gua
29. press the REPEAT button then press the 4 buttons to select Off and press ENTER button t The disc will play from A to B repeatedly at the speed you chose DVD OPERATIONS Adjusting the Aspect Ratio EZ View Set the aspect ratio length x width of your TV screen so the DVD VCR will display movies at the appropriate size for your television To Playback using Aspect Ratio DVD The EZ View feature is not available Press the EZ VIEW button on ihe front panel The screen size changes when the button is pressed repeatedly The screen zoom mode when the A B Repeat function is activated operates differently depending on the screen setting in the Display Setup menus To ensure correct operation of the EZ VIEW button you should set the correct aspect ratio inthe Display Setup menu See pages 57 t0 58 If you are using a 16 9 TV For 16 9 aspect ratio discs WIDE SCREEN Displays the content of the DVD title in 16 9 aspect ratio SCREEN FIT The top and bottom portions of the screen are cut off When playing a 2 35 1 aspect ratio disc the black bars at the top and bottom of the screen will disappear The picture will look vertically stretched Depending on a type of disc the black bars may not disappear completely ZOOM FIT The top bottom left and right of the screen are cut off and the central portion of the screen is enlarged
30. though you have a TV with a 4 3 ratio screen Black bars will appear at the top and bottom of the screen 4 3 Pan Scan Select this for conventional size TVs when you want to see the central portion of the 16 9 screen Extreme left and right side of movie picture will be cut off 16 9 Wide You can view the full 16 9 picture on your wide screen TV Black Level The Black Level feature adjusts black reference level 49 in the video signal to one of two choices On This will enhance the Black Level for increased brightness contrast when viewing DVDs Off This is the Standard NTSC reference Black Level for consistent brightness contrast across all sources Alt Video Out The Alt Video Out option must be set in the on screen menu if you have connected your DVD VCR to a TV using the S VIDEO OUT or COMPONENT VIDEO OUT jacks S Video Select when you want to use S Video output Component Select when you want to use Component interlace 525i Out or Progressive 525p Out ENG 58 Note it cannot be adjusted when Alt Video Out is set to Progressive See your TV owner s manual to determine what type of TV you have interlace Interlaced Scan mode will work Progressive Progressive Scan mode will work and Video and S Video will not work Press the PROGRESSIVE button on the front panel or remote control in stop mode Be sure to set the correct Video output fo
31. ERS Road Ridgefield Park NJ 07660 05114 TEL 1 800 SAMSUNG SERVICE DIVISION 400 Valley Road Suite 201 Mount Arlington NJ 07856 1 800 SAMSUNG 1 800 726 7864 Www samsung com AK68 00593A 00
32. Output Mode Searching for a Specific Sequence Basic Recording P Speak ROGO NFS ntaat i a na a aa a ae UMS Using One Touch Recording erna Selecting the Recording Speed x usinga NmMerRecordNg 23 223 a AAA a A fa vee pa ee Chapter 6 Reference FROUDIGSHOOUAG seti s a dks ta bi Pa a AT RA aa aga 80 FOCHNICALSDOCIICANONS renesse Nene reprae aisead pr Beats das Saket hin deste 82 Chapter 1 SETUP General Features DVD VCR Features Perfect compatibility to play back DVDs audio CDs or VHS Tapes Enjoy a DVD movie while recording a TV show to the VCR Auto Setup instantly finds the time and runs channel search RF inputs and outputs for all kinds of TVs available Composite S Video and Component Video outputs On Screen Program Englisn French Spanish DVD Features 10 bit video digital to analog converter and 54MHz advanced digital filter Playback of 96KHz 24 bit sources DTS digital output for DTS ennanced DVDs VCR Features Hi Fi Stereo VCR Superior slow motion and stop action with 4 heads Playback of S VHS tapes with a better than standard resolution INTRO Scan Zero Return and END Search 7 event 1 month timer recording Time remaining counter real time counter Note a Discs which cannot be played with this player DVD ROM DVD RAM VCD CDVCDV Super Audio CD CD HD
33. SE ARTIFACTS TO BE DISPLAYED IN THE PICTURE IF 525 PROGRESSIVE SCAN PICTURE PROBLEMS OCCUR IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE STANDARD DEFINITION OUTPUT IF THERE ARE QUESTIONS REGARDING YOUR TV SET COMPATIBILITY WITH THIS MODEL 525p DVD VCR PLEASE CONTACT SAMSUNG S CUSTOMER SERVICE CENTER ENG 6 SETUP Disc Type and Characteristics This DVD VCR is capable of playing the following types of dises with the corresponding logos Disc Types Logos Recording Types Disc Size Max Playing Time Characteristics DVD Single sided 240 min DVD contains excellent sound Audio 12 Cm Double sided 480 min and video due to Dolby Digital i and MPEG 2 system END a Various screen and audio VEDEO video 8 Cm a ft functions can be easily selected ouple sided 199 MIN through the on screen menu AUDIO CD 12 Cm 74 min CDis recorded as a Digital Signal with better audio quality POMEACT Audio less distortion and less ISG 8 om 20 min deterioration of audio quality DIGITAL AUDIO over time CD R CD RW and DVD RW R DVD RW R discs may not be playable in all cases due to the disc type or condition of the recording Disc Markings oO Play Region Number Region Number Both the DVD VCR and the discs are NTSC NTSC broadcast system in U S A Canada Korea Japan etc coded by region These regional codes must match in order for the
34. amp buttons fo select Setup then press the or ENTER button 3 Press the A buttons to select Front Display then press the or ENTER button to select Auto Bright or Dim 4 Press the MENU button to exit e Auto Front Panel Display will dim automatically during power off e Bright Front Panel Display will be bright all the time e Dim Front Panel Display will be dim all the time ENG 27 INITIAL SETUP Setting the Power Off Automatically This feature automatically turns off your DVD VCR if no signal is received and you do not press any buttons for the selected time eae AA 1 SO Press the MENU button 2 Press the A V buttons to select Setup then press the gt or ENTER button 3 Press the amp buttons to select Auto Power Off then press the gt or ENTER bution to select Off 1Hr or 2Hr 4 Press the MENU button to exit Off Auto power off is disabled Hr DVD VCR will auto shut off 1 hour after the last button is pressed or no signal is received a 2Hr DVD VCR will auto shut off 2 hours after the last button is pressed or no signal is received ENG 28 Chapter 4 DVD OPERATIONS Playing a Disc Before Play Turn on your TV and set it fo the correct Video Input on your TV s remote control If you connected an external Audio System turn on your Audio System and set it to the correct Audio Input Playback 1 Press the OPEN CLOSE A
35. ay Pause button to resume normal play Reverse slow motion play will not 8 Slow Motion Play Except CD Press and hold the p Forward GG Wok button to choose the play speed AAA between 1 8 1 4 and 1 2 of 5 x normal during PAUSE or STEP amp Note _ mode This icon indicates an invalid button press ENG 30 DVD OPERATIONS Using the Search and Skip Functions During play you can search quickly through a chapter or track and use the skip function to jump to the next selection Searching through a Chapter or Track aj if you want to search at a faster speed on the DVD or CD press and hold the button pvo 2X 8X 32X 128X CD 2X 4X 8X During play press and hold the 4 gt Search buttons on the remote control for more than 1 second Notes The speed marked in this function may be different from the actual playback speed No sound is hearing during search mode Except CD Skipping Tracks During play press the 144 p Skip buttons When playing a DVD if you press the Skip button it moves to the next chapter If you press the kea Skip button it moves to the beginning of the chapter One more press makes it move to the beginning of the previous chapter ENG 31 DVD OPERATIONS Using the Display Function When Playing a DVD CD i 7 EN R EN 1 OOO During play press the INFO ees button on the remot
36. can be organized into folders as shown below They are similar to how you use your computer to put files into different folders 1 Open the disc tray 2 Place the disc on the tray 3 aie Se A E Parent Folder Folders and Files Current Folder and in Current Folder Close the tray Peer Folders The tray closes and this screen displays Name of currently playing file MP3 file icon Current Playback Time ETE WMA file icon ao Current Playback Mode There are four A E baa is modes They can be selected in order by VREG Mecon pressing the REPEAT button Off Normal Playback g lt Folder icon Track Repeats the current track Folder Repeats the current folder gy Current Folder icon Random Files in the disc will be played in random order Disc mode Folder Selection The folder can only be selected in the Stop mode To select the Parent Folder BI noot Press the RETURN button to go the to parent pon folder or press the A buttons to select and H wma press the ENTER button to go to the parent folder HE seca To select the Peer Folder H meo Parent Forger Press the lt buttons to highlight the left window J oenen roder Press the amp buttons to select the desired folder then the ENTER button an r To select the Sub Folder Press the d buttons to highlight the right window Press the amp buttons to select th
37. cassette Press the CLEAR button at the point on the tape where you want to set the counter to 0 00 00 The VCR will rewind or fast forward searching for the 0 00 00 counter position and then automatically stop at that position End Search Use this feature when you Lo a want to search for a blank sg position to record a program Ly on a cassette os The VCR will fast forward searching for a blank position and then automatically stop at that position if the VCR reaches the end of the tape during ends search the tape will be ejected Scan and play Use scan and play when you don t know exactly where a program is located on a cassette tape Forward Intro Scan Select Forward Intro Scan then press the ENTER button Reverse Intro Scan A Select Reverse Intro Scan then press the ENTER button ENG 73 VCR OPERATIONS Basic Recording You can record a TV show in progress by inserting a blank tape and pressing the REC button You can even add time in 30 minute increments up to 4 hours by pressing the REC button repeatedly see page 76 Note Be sure your videotape has a Record Safety Tab If the tab is missing you can cover the opening with a small piece of tape Warning Do not cover this opening unless you are sure you want to record over the tape Before You Begin Power on the DVD VCR Power on the TV Protecting a Recorded Cassette Video casset
38. d on the tape box The menu cycles through 1 120 T 160 or T 180 Once the type of cassette is set the VCR can display the amount of time remaining on the tape when you press the INFO button 3 Press the A F buttons to select Tape Length then press the or ENTER button to select the correct cassette length 4 Press the MENU button to exit ENG 66 VCR OPERATIONS Setting the Auto Play if you want your videotapes to play automatically when you insert them turn on Auto Play Note Only tapes that are missing the Record Safety Tab will play automatically when inserted See page 62 Press the MENU button on the ss remote control amp 2 Press the buttons to select VCR then press the P or ENTER button a On The VCR will automatically begin playing a video tape when it is inserted as long as the safety 3 Press the A W buttons to select Auto Play then press tab of we cassette has been the gt or ENTER button to I select On or Off Off Auto play is disabled 4 Press the MENU button to exit ENG 67 VCR OPERATIONS Setting the Auto Repeat if you want your videotapes to play repeatedly turn on Auto Repeat Press the MENU button on the gt remote control S Press the A butions to Megs select VCR then press the or ENTER button 7 ai On The VCR will play a tape repeatedly unl
39. ded With the unit in stop mode set the Alt video Blue Green output to Component Interlace in the Display Setup menu see pages 57 58 or press the PROGRESSIVE button on the remote control 3 y TV until interlace is output AUDIOIN COMPONENT IN 4 Press the input selector on your TV remote control until the Component signal from the DVD VCR appears on the TV screen Notes If Video output is Incorrectly set to S Video with the Component cables connected the screen will turn red if you want to connect to an Amplifier please refer to the Amplifier connection page See pages 17 to 18 The component terminal of your TV may be marked R Y B Y Y or Cr Cb Y instead of PR PB Y depending on the manufacturer The number and position of terminals may vary depending on the TV set Please refer to the user s manual of your TV ENG 15 CONNECTIONS Connection to a TV Progressive 1 Using component video cables not included connect the COMPONENT VIDEO OUT terminal on the rear of the DVD VCR to the COMPONENT IN terminal of your TV 2 Using the audio cables connect the AUDIO red and white OUT terminals on the rear of the DVD VCR to the AUDIO red and white IN terminals of your TV Turn on the DVD VCR and TV 3 With the unit in stop mode set the Alt video Component Cabl
40. dio output jack of your external device 4 LINE OUT VIDEO AUDIO Use a Video Audio cables to connect to the Video Audio input jacks on your television Notes e Consult your TV User s Manual to find out if your TV supports Progressive Scan If Progressive Scan is supported follow the TV User s Manual regarding Progressive Scan settings in the TV s menu system e if Component Progressive Scan Output is selected in Alt Video Out menu Video and S Video will not work See pages 57 58 to get more information on how to use the Alt Video Out menu ENG 9 SETUP Tour of the Remote Control 1 10 11 12 13 POWER button Press to turn the DVD VCR on and off NUMBER Buttons CLEAR button Use to remove menus or status displays from the screen DVD button Use to operate DVD VCR button Use to operate VCR dd H d Search Skip button Press to reverse search skip a disc Use to skip a title chapter of track on a disc E STOP button Press to stop a disc video tape during play or record VCR SUBTITLE button Press to display the subtitle language name abbreviation on screen MENU button Brings up the DVD VCR player s menu ENTER 4 lt b Channel Tracking A or Y buttons This button functions as a toggle switch Press to change channels TY Press to adjust tape tracking VCR REC button Press to begin recording VCR PROGRESSIVE SPEED button Press to select
41. e a not included output to Component Progressive in the Display Red AnieA Yh A Green Setup menu see pages 57 58 or press the LS PROGRESSIVE button on the remote control OC 6 Progresive Scan mode prompt screen appears e P a cana k Iy Then press ENTER and progressive will be output 4 Press the input selector on your TV remote control until the Component signal from the DVD VCR appears on the TV screen To see the progressive video output Consult your TV User s Manual to find out if your TV supports Progressive Scan If Progressive Scan is supported follow the TV User s Manual regarding Progressive Scan settings in the TV s menu system Depending on your TV the connection method may differ from the illustration above Note What is Progressive Scan Progressive scan has twice as many scanning lines as the interlace output method Progressive scanning method provides better and clearer picture quality ENG 16 CONNECTIONS Connection to an Audio System Connection to an Audio System 2 Channel Amplifier 1 Using the audio cables connect the LINE AUDIO red and white OUT terminals on the rear of the DVD VCR to the AUDIO red and white IN terminals of the Amplifier 2 Using the video signal cable s connect the VIDEO S VIDEO or COMPONENT OUT terminals on the rear of the DVD VCR to t
42. e canceled To Cancel Programming 4 Press the REPEAT button Jo finish programming and The program will not be saved and the start playback press the mil program screen will disappear button The disc will be played in i let orca Elin hal a programmed order 7 FOGLE ip ae stop mode Press ENG 49 DVD OPERATIONS Picture CD Playback 1 Select the desired folder then press the ENTER button 2 Press the amp buttons to select a Picture file in the clips menu then press the ENTER button Notes 3 if no buttons on the remote control are un am k Press the INFO button to Gp n enai eee te Dene display th menu Press the m Stop button to return to the Press the d butions to clips menu select the menu you want to When playing a Kodak Picture CD the view then press the ENTER button Album Screen aa Returns to the Album Screen To see the next six pictures press the b Skip button To see the previous six pictures press the 144 Skip button Rotation ET Each time the ENTER button is pressed the picture rotates 90 degrees clockwise Zoom Q Press the amp or lt buttons to select the part of the screen you want to Zoom in on Press the ENTER button Each time the ENTER buiton is pressed the picture is enlarged up to 4X 2X 4X gt 2X Normal unit displays the Photo directly not the clips menu Slide Show
43. e control a YOu can select information in the DVD Function menu by pressing the MENU button Press the amp butions to select the desired item a You may use the number buttons of the remote control to directly access a title chapter or to start the playback from a desired time 3 Press the 4 buttons to make the desired setup and then press the ENTER button ENG 32 DVD OPERATIONS A To exit the menu press the INFO button again Nate To access the desired title when there is more than one in the disc For example if there is more than one movie on a DVD each movie will be identified Most DVD discs are recorded in chapters so that you can quickly find a specific passage similar to tracks on an audio CD Allows playback of the film from a desired time You must enter the starting time as a reference The time search function does not operate on some discs Refers to the film s soundtrack language In the example the soundtrack is played in English 5 1CH A DVD disc can have up to eight different soundtracks Refers to the subtitle languages available in the disc You will be able to choose the subtitle languages or if you prefer turn them off from the screen A DVD disc can have up to 32 different subtitles ENG 33 DVD OPERATIONS Using the Disc and Title Menu DVD MENU button can be used to access Disc and title menus on a DVD dur
44. e desired folder oy Sauer a Peer Folders then press the ENTER button i aR eat SONG FILE 3 ENG 46 DVD OPERATIONS MP3 WMA Playback 1 Open the disc tray 2 Place the disc on the tray 3 Close the tray 4 a When a disc or a folder contains both MP3 and WMA files only one type will Press the amp or 4 gt beplayed notibath buttons to select a song file Press the ENTER button to begin playback of the song file Repeat Random playback During paly press the REPEAT button to change the playback mode There are four modes Off Track Folder and Random G Off Normal Playback Track Repeats the current song file Folder Repeats the song files which have the same extension in the current folder Random Song files which have the same extension will be played in random order To resume normal play press the CLEAR button ENG 47 DVD OPERATIONS CD R MP3 WMaA file When you record MP3 or WMA files on CD R please refer to the following Your MP3 or WMA files should be ISO 9660 or JOLIET format ISO 9660 format and Joliet MP3 or WMA files are compatible with Microsoft s BOS and Windows and with Apple s Mac This format is the most widely used When naming your MP3 or WMA files do not exceed 8 characters and enter mp3 wma as the file extension General name format Title mp3 or Title wma When composing your title
45. e is any fluorescent lighting nearby ENG 3 TABLE OF CONTENTS Table of Contents Safety INSIUCHONSS xi dna ieee nee SR GR U eens see ears 2 Imporiant Salety INSWUCTIONS iris sta anna aa 2 Before you Stat asnast ina gaf a cen eel E A enn Maecenas 3 PCCOSSONGSS assa na ME nn altari Mas A Lana onde ae te ae AR ase 3 Install Batteries in the Remote Control 30 202 yn aaa kana i a AR a AR RA AR RA 3 Chapter 1 Setup General FAS k sinni li anna ina Abd ana A menace ei a pg ala 6 Dise ype and CNAFACICHISTCS alent deere na o E oee E OTE 7 POS CI oons miget aaa a a a ake ad a tn 8 AOUPOL Me REME CONO ci inusitat alaaa 0 Chapter 2 Connections Connecting the Antenna Caples we co 32 133 ikea ad sat eh ay louse aaaade a ang dauennidaceadesecpeddasczerseusetied 1 Method Antenna DVD VCR TV NO Cable BOX oo ene tt Method2 Antenna DVD VCR TV Cable box with many scrambled channels 12 Method3 Antenna DVD VCR TV Cable box with a few scrambled channels 42 Before Connecting the DVD VOR re 48 GOMMOCHON 1028 abs Vendo ee ete ee SEEEN AEE topics EEE EEA EEE psd ga desde a eres 13 Connection toa FV Video av 3 10 Mee acien ARA Ra aa ute eee aie R 3 Connection toa EV AS ViGGO tornia ran AE eg a a g a Ea 4 Connection toa TV InteHlace 1 0 0 30s3insstn ns Ata KRR A JR VR a FR RUN 15 Connection io d FVRLOGLOSSIVE snerta as aaa ai a 16 Connection to an Audio SYSTEM anian dui eee ee eee ee os T
46. ed to listen to the sound on the normal mono channel Hi Fi Used to listen to Hi Fi stereo sound on the left and right channels When playing back tapes recorded in Hi Fi the sound switches to Hi Fi after five seconds of Mono ENG 71 VCR OPERATIONS Searching for a Specific Sequence Each time you record a cassette on this DVD VCR an index is automatically marked on the tape when recording starts The Search function allows you to fast forward or rewind to a specific index and start playback from that point Depending on the direction selected the indexes are numbered as follows 4 i Prev Seq being Next i ete Seq played Seq elt 2 1 1 2 This DVD VCR uses a standard indexing system VISS As a result it will recognize any indexes marked by other VCRs using the same system and vice versa 1 RERE ALS B wont Press the MENU button onthe 2 remote control i i ry Press the A buttons to select Function then press the gt or ENTER button 3 ah L HAM Press the amp buttons to select VCR Function then press the or ENTER button VCR Function can be displayed simply by pressing the SEARCH button Press the A buttons to stent select the desired item then press the or ENTER button ENG 72 VCR OPERATIONS Variable Search System Go To 0 00 00 Stop Use this feature when you want to search for the 0 00 00 counter position on a
47. ess a tape control 3 Press the A F buttons to is activated stop fast forward or seleci Auto Repeat then rewind press the or ENTER button to select On or Off Off Auto Repeat is disabled 4 Press the MENU button to exit ENG 68 VCR OPERATIONS Using the Tape Counter The tape counter Indicates the elapsed time in the play and record modes hours minutes and seconds s reset when a cassette is inserted in the DVD VCR Allows you to easily find the beginning of a sequence If the remaining time is to be calculated correctly you must indicate the type of cassette being used 1 Insert a cassette in your DVD VCR To set the tape counter to zero al the beginning of a sequence Press the INFO button twice to display the counter Press the CLEAR button when you want to set the tape counter to zero D 4 EN R om When you are ready HOHE Start playback or Recording hs Press the Stop button To fast forward or rewind to the sequence at which the Ile gt counter Was set to zero press the thess Forward or sd Rewind button Some DVD VCR information such as the counter can be displayed on the television screen Press the INFO button Once fo display the current function recording speed and counter Twice to display the counter only Three times to display the time remaining on the cassette Four times to clear the display
48. etting Note You can select external input directly L1 or L2 using INPUT SEL button 4 s Set Time Date Speed Repeat Step 3 above to set start time end time date and record speed Date can be sel for one time daily or weekly recording ENG 78 VCR OPERATIONS Selecting Auto Speed lf the length of the videotape is not long enough for a timer recording in the SP mode set the recording tape speed to Auto Recording will start in the SP mode If the length is not long enough the tape speed will automatically change from SP mode to SLP mode DailyWeekly Date Programming Weekly sun s sat s Use this to record TV programs on the same channel at the same time every week Daily MO FR Use this to record TV programs on the same channel at the same time every day Monday through Friday 5 Save Timer Recording Press the RETURN button to finish setting the timer recording Stop the DVD VCR or turn the power off Then the DVD VCR will automatically turn on and begin recording at the time you set To stop the timer recording press the POWER button or press the E Stop button twice E ENG 79 Chapter 6 REFERENCE Troubleshooting Before contacting a Samsung authorized service center perform the following simple checks If you are unable to solve the problem after reading the above instructions note The model and serial number on the rear of your DVD VCR The warranty
49. g you The television Check the DVD VCR antenna cable connections program was not Is the DVD VCR tuner properly set recorded Check if the safety tab is intact on the cassette Timer recording Re check the recording start stop time settings was unsuccessful If there was a power failure or interruption during timer tenor the recordi ding will have been cancelled No playback picture Check to see ef youe are using a 2 prerecorded tape or the picture is distorted You cannot see Check the tuner or external setting It should be on tuner normal broadcasts Check the TV or VCR antenna connections Noise bars o or Press the TRK buttons to minimize this effect streaks on playback When the Al button A stil picture may have noise bars depending on the lyti oat condition of the tape Press the TRK buttons during slow picture Hasisavere motion to minimize this effect noi ise bars streaks Video Head If poor pictures appear on a variety of cassettes the video Cleaning heads may need cleaning This is not a common problem and unless it appears the heads should not be cleaned When cleaning the video heads read all instructions provided with the head cleaning cassette Incorrect head cleaning can permanently damage the video heads ENG 81 REFERENCE Technical Specifications AUDIO 2 Stereo audio inputs RCA Connector 8dbm 47KQ front and rear
50. ge the specifications with out notice Weight and dimensions are approximate ENG 82 REFERENCE Warranty THIS SAMSUNG BRAND PRODUCT AS SUPPLIED AND DISTRIBUTED BY SAMSUNG ELECTRONICS AMERICA INC SAMSUNG AND DELIVERED NEW IN THE ORIGINAL CARTON TO THE ORIGINAL CONSUMER PURCHASER IS WARRANTED BY SAMSUNG AGAINST MANUFACTURING DEFECTS IN MATERIALS AND WORKMANSHIP FOR THE FOLLOWING LIMITED WARRANTY PERIOD One 1 Year Parts Ninety 90 days Labor This limited warranty begins on the original date of purchase and is valid only on products purchased and used in the United States and does not include transportation installation removal or reinstallation WARRANTY REPAIRS MUST BE PERFORMED BY SAMSUNG S AUTHORIZED SERVICE CENTER TO RECEIVE WARRANTY SERVICE THE ORIGINAL DATED BILL OF SALE MUST BE PRESENTED UPON REQUEST AS PROOF OF PURCHASE TO SAMSUNG OR SAMSUNG S AUTHORIZED SERVICE CENTER TRANSPORTATION TO AND FROM THE SERVICE CENTER IS THE RESPONSIBILITY OF THE PURCHASER SAMSUNG WILL REPAIR OR REPLACE THIS PRODUCT AT OUR OPTION AND AT NO CHARGE WITH NEW OR RECONDITIONED PARTS IF FOUND TO BE DEFECTIVE DURING THE LIMITED WARRANTY PERIOD SPECIFIED ABOVE The product must be returned during the warranty period with transportation charges prepaid fo SAMSUNG s designated service center Prior to returning any product for warranty service the purchaser must contact SAMSUNG for problem determination and service procedures SAMSUNG
51. he VIDEO S VIDEO or COMPONENT OUT terminal of your TV as described on pages 13 to Red White 16 T Sateo OUT a Turn on the DVD VCR TV and Amplifier Red White oo 2 channel Stereo Amp AU IGIN 4 Press the input select button of the Amplifier to Select external input in order to hear sound from the DVD VCR Refer to your Amplifier s user manual to set the Amplifiers audio input Notes Please turn the volume down when you turn on the Amplifier Sudden loud sound may cause damage to the speakers and your ears Please set the audio in the menu screen according to the Amplifier See pages 55 to 56 The position of terminals may vary depending on the Amplifier Please refer to your Amplifier s user manual ENG 17 CONNECTIONS Connection to an Audio System Dolby digital MPEG2 or DTS Amplifier 1 Using a coaxial cable not included connect the DIGITAL AUDIO OUT COAXIAL terminal on the rear of the DVD VCR to the DIGITAL AUDIO IN COAXIAL terminal of the Amplifier 2 Using the video signal cable s connect the S VIDEG or COMPONENT OUT terminals on the rear of the DVD VCR tothe S VIDEO or COMPONENT OUT terminal of your TV as described on pages 14 fo 16 Coaxial Cable 3 not included 1 gt Turn on the DVD VCR TV and Amplifier Coaxial A
52. ideo tape Connect to the Video Audio output jack of your external device Front Panel Display o 8 1 DVD is activated 2 The time counter position time remaining or current deck status is indicated VCR is activated DVD or CD media is loaded VHS videotape is loaded ENG 8 SETUP Rear Panel 1 AUDIO OUT 5 RF IN FROM ANT Connect to the Audio input jacks of your Connect the RF Antenna cable to your DVD VCR television 6 VIDEO OUT 2 COMPONENT VIDEO OUT Use the S Video cable to connect this jack to the Use these jacks if you have a TV with S Video input jack on your television for higher Component Video in jacks picture quality These jacks provide Pr Ps and Y video if Component Progressive Scan Video Output 7 DIGITAL AUDIO OUT COAXIAL is selected in the Alt Video Out menu or by Use a Coaxial digital cable to connect to a using the P SCAN button on the front panel compatible Dolby Digital receiver progressive scan mode will be enabled Use a coaxial digital cable to connect to an AV If Component Interlace Scan Video Output is Amplifier that contains a Dolby Digital MPEG2 selected in the Alt Video Out menu or by using or DTS decoder the P SCAN button on the front panel interlaced scan mode will be enabled 8 RF OUT TOTV Connect your DVD VCR to a TV 3 LINE IN 7 VIDEO AUDIO Connect to the Video Au
53. ing playback During playback of a DVD disc press the MENU button on the remote control Press the A F buttons to select Function then press the or ENTER button 3 Press the amp buttons to select DVD Function then press the or ENTER button 4 er Notes Depending on the disc the Disc Menu or Press the amp buttons to d Title Menu may not work select Title Menu or Disc You can also use the Disc Menu by using Menu then press the P or eae the DISC MENU button on the remote ENTER button ie control Title Menu will only be displayed if there are at least two titles in the disc ENG 34 DVD OPERATIONS Using the Function Menu DVD MENU button can be used to access DVD functions such as Information Zoom Bookmark Repeat and EZ view menu during DVD playback During the playback of a DVD disc press the MENU button on the remote control 2 Press the A buttons to select Function then press the or ENTER button Press the A W buttons to snp select DVD Function then press the or ENTER button information on tetas See pages 32 to 33 E ecto es Zoom See page 45 Bookmark See pages 43 to 44 Repeat See pages 36 to 37 EZ View See pages 39 to 40 a You can also directly select these functions using their respective buttons on the remote control 4 Press the
54. j ENG 69 VCR OPERATIONS Using the Assemble Edit Function This function allows you to start a new recording at a specific position on the cassette while maintaining a very smooth scene change 1 insert the cassette to be edited in your DVD VCR 2 Press the il Play Pause button to start playback 3 When you reach the position from which you wish to start the new recording press the bil Play Pause button 4 Press the FADV button as often as necessary to advance frame by frame until the exact recording position is located 5 While the DVD VCR is in pause mode press the REC button The pause mode is displayed on the screen ENG 70 VCR OPERATIONS Select the source from which you wish to record by pressing The CH amp or button for television channel The INPUT SEL button for the LINE or LINE2 input source F Press the REC button to start recording When you have finished recording press the Stop button Selecting the Audio Output Mode You can select the mode in which the sound is reproduced on the loudspeakers and AV outputs The following options are available Press the AUDIO button on the remote control until the required option is displayed a Audio output Mode Left Used to listen to the sound on the left Hi Fi channel Right Used to listen to the sound on the right Hi Fi channel Mono Us
55. le box with a few scrambled channels You can record non scrambled channels by selecting the channel on the cable box You cannot record scrambled channels that require a cable box To RF IN Antenna cable To Antenna Input ENG 12 CONNECTIONS Before Connecting the DVD VCR Always turn off the DVD VCR TV and other components before you connect or disconnect any cables Refer to the user s manual of the additional components such as a TV you are connecting for more information on those particular components Connection to a TV The following shows examples of connections commonly used to connect the DVD VCR with a TV and other components Connection to a TV Video 1 Using video audio cables connect the VIDEO yellow AUDIO red and white OUT terminals on the rear of the DVD VCR to the VIDEO yellow AUDIO red and white IN terminals of your TV 2 Turn on the DVD VCR and TV Audio Cable Real j i I Video Cable 3 Red White Yellow Press the input selector on your TV remote A g 6 control until the Video signal from the DVD VCR appears on the TV screen Doen e Yellow Notes Noise may be generated if the audio cable is placed too close to the power cable if you want to connect to an Amplifier please refer to the Amplifier con
56. nection page See pages 17 to 18 The number and position of terminals may vary depending on your TV set Please refer to the user s manual of your TV lf there is one audio input terminal on the TV connect it to the AUDIO OUT Left white terminal of the DVD VCR if you press the PROGRESSIVE button when DVD VCR is in stop mode or no disc is inserted the Alt Video Out mode changes in the following sequence S Video Interlace Progressive When the Alt Video Output in Display setup menu is set to Progressive the S Video Outputs does not work ENG 13 CONNECTIONS Connection to a TV S Video Connecting to your TV using an S Video cable You will enjoy high quality images S Video separates the picture element into black and white Y and color C signals to present clearer images than regular video input mode Audio signals are delivered through the audio output 1 Using an S Video cable not included connect the S VIDEO OUT terminal on the rear of the DVD VCR to the S VIDEO IN terminal of your TV 2 Using the audio cables connect the AUDIO red and white OUT terminals on the rear of the DVD VCR to the AUDIO red and white IN terminals of your TV Turm on the DVD VCR and TV 3 With the unit in stop mode set the Ali video output to S Video in the Display Setup menu see pages 57 58 or press the PROGRESSIVE button on the remote control until S Video is output A Press the input selec
57. older can be played automatically Konica Picture CD If you want to see the Picture select the JPEG files in the clips menu Fuji Picture CD if you want to see the Picture select the JPEG files in the clips menu O85 Picture CD The unit may not play QSS Picture CD If the number of files in Disc is over 3000 only the first 3000 JPEG files can be played H he number of folders in 1 Disc is over 300 only JPEG files in the first 300 folders can be played ENG 51 DVD OPERATIONS Using the Setup Menu The Setup menu lets you customize your DVD VCR by allowing you to select various language preferences set up a parental level even adjust the player to the type of television screen you have 1 l HHH With the unit in Stop mode ss press the MENU button on the remote control pot Press the A F buttons to select DVD then press the P 7 or ENTER button d DVD Setup seri gusg p Language Setup of the Language Audio Setup of the Audio Options Display Setup of the Display Options Used to select which type of screen you want to watch and several display options Parental Setup of the Parental Level Allows users to set the level necessary to prevent children from viewing unsuitable movies such as those with violence adult subject matter etc 3 Press the A buttons to access the different features Press the P or ENTER bution to access the sub features
58. on depends on what subtitles 5 are encoded on the disc and may not The subtitle changes when work on all DVDs the lt d button is pressed repeatedly The subtitle languages ae represented by abbreviations A DVD disc can contain up to 32 subtitle languages To have the same subtitle language come up whenever you play a DVD see pages 53 to 54 2 To remove ihe SUBTITLE icon press the SUBTITLE CLEAR or RETURN bution ENG 42 DVD OPERATIONS Changing the Camera Angle When a DVD contains multiple angles of a particular scene you can use the ANGLE function Using the ANGLE button DVD if the disc contains multiple angles the ANGLE icon appears on the screen 1 Press the ANGLE button then the ANGLE icon will appear with the current angle number and the number of angles available Note 2 Big If the disc has only one angle this feature Press the lt gt button won t work Currently very few discs have repeatedly to select the inis Jeatire desired angle To remove the ANGLE icon press the CLEAR or RETURN bution Using the Bookmark Function This feature lets you bookmark sections of a DVD so you can quickly find them at a later time Using the MARK button DVD 1 During play press ihe MARK button on the remote control SED REPEAT TER Note Depending on a disc the Bookmark function may not work 9 When you reach the scene you want to mark p
59. progressive scan mode DVD Press to select the tape recording speed VCR MODE button Use to select the program or random play REPEAT button Allows you to repeat play a title chapter track or disc DVD o 00000 o CE I SAMSUNG ENG 10 20 21 22 23 24 TVAVCR button Press to switch between TV and VCR mode SHUTTLE 9 6 buttons Use fo play a sequence at variable speeds VCR AUDIO button Use this button to access various audio functions on a disc DVD F ADV SKIPANPUT SEL button Press to advance play one frame at a time DVD and VCR Press to fast forward a video tape VCR Press to select a external signal source Pe b Pl Search Skip button Press to forward search skip a disc Use to skip a title chapter or track on a disc m l Play Pause button Press to play or pause the disc video tape INFO button Displays the current disc mode DVD RETURN button Returns to a previous menu DISC MENU button Brings up the Disc menu DVD MARK SEARCH button Press to memorize scenes for replay DVD Displays the VCR Function menu VCR ANGLE TIMER button Use to access various camera angles on a dise DVD Displays the Timer Program menu Chapter 2 CONNECTIONS Connecting the Antenna Cable There are several ways to connect your DVD VCR Select one of the following antenna connections that best suits you below
60. r the proper picture DVD OPERATIONS Setting Up the Parental Control The Parental Control function works in conjunction with DVDs that have been assigned a rating which helps you control the types of DVDs that your family watches There are up to 8 rating levels on a disc Tto i Ao oo With the DVD in Stop mode oot press the MENU button on the remote control Sey 2 Press the A buttons to select DVD then press the P or ENTER button 3 Press the amp buttons to select Parental then press the or ENTER button 4 Press the or ENTER button to set up password if you want to use a password The Enter Password screen appears sat To make the DVD Setup menu disappear press the MENU button 5 Enter your password The Re enter Password screen appears to confirm the password Enter your password again The player is locked Note There is no default password ENG 59 DVD OPERATIONS Setting Up the Rating Level SS OU With the unit in stop mode press the MENU button on the g remote control 2 Press the buttons to select DVD then press the gt or ENTER button 3 Press the A butions to select Parental then press the or ENTER button Enter your password 4 Press the A buttons to select Rating Level then press the or ENTER button To make the DVD setup menu disappear p
61. rantee that the DVD VCR will play MP3 recordings or as an assurance of sound quality You should note that certain technologies and methods for MP3 file recording on CD Rs prevent optimal playback of these files on your DVD VCR degraded sound quality and in some cases inability of the player to read the files This unit can play a maximum of 3000 files and 300 folders per disc ENG 48 DVD OPERATIONS Program Play amp Random Play You can listen to songs randomly or in the desired sequence Up to 20 tracks can be programmed This function is available only with Audio CDs Program Play 1 a HAN Note Random Play With the unit In stop mode With the unit in stop mode press the press the REPEAT button REPEAT button The play mode menu will The play mode menu will appear appear lE Mil Press the d or butions to select 2 Random then press the ENTER button Press the 4 or buttons to The disc will be played in random order select PROGRAM then press the ENTER button The program play screen will appear i 3 ae Press the A V or d r buttons to select the desired track then press the ENTER button The selected track will be added to the Program order Ifyou delete the track press the CLEAR bution The track added last will be Note deleted from the Program if the disc tray is opened during order programming program play will b
62. re will look vertically stretched ZOOM FIT The top bottom left and right portions of the screen are cut off and the central portion of the screen is enlarged This function may behave differently depending on the type of disc ENG 40 DVD OPERATIONS Selecting the Audio Language You can select a desired audio language quickly and easily with the AUDIO button Using the AUDIO button DVD CD 1 During play press the AUDIO button Audio languages changes when the lt gt button is gt pressed repeatedly The audio languages are represented by abbreviations DVD When ain a CD you can cD select among Stereo Right or Left 2 To remove the AUDIO icon press the AUDIO CLEAR or RETURN button Notes To change the desired audio in the Disc Menu press the DISC MENU button This function depends on what audio languages are encoded on the disc and may not work on all DVDs ADVD disc can contain up to 8 audio languages To have the same audio language come up whenever you play a DVD see pages 55 to 56 T JE CZES ae ea a ae ENG 41 DVD OPERATIONS Selecting the Subtitle Language You can select a desired subtitle quickly and easily with the SUBTITLE button Using the SUBTITLE button DVD Notes 1 To change the desired subtitle in the Disc During play press the Menu press the DISC MENU button SUBTITLE button This functi
63. red language is available on a DVD your Audio Language will automatically be set to the language you choose Subtitle To set the Subtitle Language to your preferred language follow these steps If your preferred language is available on a DVD your Subtitle Language will automatically be set to the language you choose ENG 54 Select Others if the language you want is not listed If the selected language is not recorded on the disc the original pre recorded language is selected Select Original if you want the default soundtrack language to be the original language the disc is recorded in Select Others if the language you want is not listed Ifthe selected language is not recorded on the disc the original pre recorded language is selected Select Automatic if you want the subtitle language to be the same as the language selected as the audio language Select Others if the language you want is not listed Some discs may not contain the language you select as your initial language in that case the disc will use its original language setting DVD OPERATIONS Setting Up the Audio Options Audio Options allows you to set up sound for use with your external audio system 1 CH an ed o With the DVD in Stop mode sp press the MENU button on the g remote control s DD 2 Press the amp W buttons to
64. ress the ENTER button Up to three scenes may be marked ata time ENG 43 DVD OPERATIONS Recalling a Marked Scene Se During play press the MARK a button on the remote control wey hd 2 Press the lt gt buttons to select a marked scene 3 Press the wal Play Pause button to skip to the marked scene Clearing a Bookmark During play press the MARK St button on the remote control es J SO AEA TIMER Press ihe lt gt buttons to select the bookmark number you want to delete Press the CLEAR button to delete a bookmark number ENG 44 DVD OPERATIONS Using the Zoom Function DVD P During the playback of a DVD disc press the MENU button onthe remote control 2 Press the A buttons to select Function then press the or ENTER button Press the amp bultons to select DVD Function then press the or ENTER button 4 Press the amp buttons to select Zoom then press the gt or ENTER button sd During DVD play press ENTER to 5 A zoom in 2X 4X 2X Normal in order Press the A V or lt gt ee buttons to select the part of the screen you want to we a ae zoom in on Note Press the ENTER button Depending on a disc the Zoom function may not work ENG 45 DVD OPERATIONS Clips Menu for MP3 WMA JPEG Discs with MPJANMA JPEG contain individual songs and or pictures that
65. ress the REPEAT button to review the last 15 seconds of tape SLP mode ENG 64 VCR OPERATIONS Shuttle In Play mode Shuttle gt gt gradually increases the cue speed Double Speed playback Picture Search gt Jet Search Shuttle lt lt gradually slows down the tape then goes into Slow mode Still mode Reverse Picture Search and Reverse Jet Search Each time you press the SHUTTLE button the playback speed is different accordingly Using Automatic Tracking The Tracking adjustment removes the white lines that sometimes appear during playback because of slight differences in recording decks The TRK button will automatically align the recorded tracks with the playback heads to solve this problem You may also set tracking manually 1 Insert and play a video cassette tape As soon as the tape begins to play the VCR begins Mo automatic tracking 0 2 If automatic tracking doesn t remove the streaks from the picture press and hold the TRKA of TRK button until the streaks disappear ENG 65 VCR OPERATIONS Selecting the Cassette Type If you wish to use the tape counter to display the time remaining on a cassette you must indicate the type of cassette inserted 1 Press the MENU button on the remote control 2 Press the A V buttons to 23 y select VCR then press the amp or ENTER button Nate This information is usually printe
66. ress the MENU button 5 Press the 4 W buttons to select the Rating Level you want then press the or ENTER button e g Setting up in Level 6 For example if you select up to Level 6 discs that contain Level 7 8 will not play ENG 60 DVD OPERATIONS Changing the Password With the unit in stop mode press the MENU bution on the remote control 2 Press the A W buttons to select DVD then press the gt or ENTER bution Press the A V buttons to select Parental then press the or ENTER button Enter your password 4 Press the A buttons fo select Change Password then press the or ENTER button To make the DVD setup menu 5 ENAT Pelor disappear press the MENU button Enter your new password Note Re enter the new password If you forgot your password press power on again from a cold start with no disc in the unit Si Press the a44 gt Skip buttons g simultaneously on the front panel for 5 seconds The Reset OK message will appear Press the POWER button ENG 61 Chapter 5 VCR OPERATIONS in this chapter you will learn how to play a video cassette tape how to use the time counter and memory stop features and how to record a program as you are watching TV Inserting and Ejecting a Video Cassette Tape To insert a Video Cassette Tape Don t try to insert a tape upside
67. select DVD then press the P or ENTER button 3 Press the A T buttons to select Audio then press the or ENTER button al To make the DVD Setup menu 4 do Setup disappear press the MENU button Press the A V buttons to oe select the desired item then a tess press the gt or ENTER button ENG 55 DVD OPERATIONS Audio Options Digital Output PCM Convers to PCM 2CH audio Bitstream Outputs Dolby Digital via the digital output Select Bitstream when connecting to a Dolby Digital Decoder iii DTS Select On when connecting r to a DTS Decoder klara Off Doesn t output digital signal On Outputs DTS Bitstream via digital output Dynamic Compression On When the movie soundtracks are played at 7 low volume or from smaller Vp ae speaker the system can apply appropriate compression to make low leveel content more stj intelligible and prevent dramatic passages from getting too loud Off To select the standard range PCM Down Sampling On Select this when the Amplifier connected to the playeris not 96KHz compatible In this case the 96KHz signals will be down f converted to 48KHZ Off Select this when the Amplifier connected tothe player is 96KHz compatible in this case all signals will be output without any changes ENG 56
68. tes have a safety tab to prevent accidental erasure When this tab has been removed you cannot record on the tape If you wish to protect a cassette break off the tab using a small screwdriver Cr To re record over a protected cassette safety tab broken Oa cover the hole with adhesive Record Safety Tab tape Recording 1 insert a blank VHS tape into the VCR deck Make sure the tape is long enough to record the entire program Press the SPEED button to set to the record speed See page 77 2 Use the Number buttons or the CH 4 or Y buttons to select the desired channel or press the INPUT SEL button to select Line 1 or 2 if recording from an external device connected to the front or rear jacks respectively ENG 74 VCR OPERATIONS 3 Press the REC bution on the remote control or front panel For options while recording is in progress see Special Recording Features on this page Note Recording from the DVD VCR to the VCR is not possible 4 Pause Resume Recording Press the mil Play Pause button Press the REC bution again to resume 5 Stop Recording Press the Stop button Special Recording Features While a recording is in progress you can watch a different channel or a DVD or add recording time in 30 minute increments To Watch a different Channel while Recording Make sure that you connect the DVD VCR to the TV using
69. tor on your TV remote control until the S Video signal from the DVD VCR appears on your TV screen Notes SED OE Audio Cable S Video Cable not Included b gt Red White al Q Q Tv SVIDEO IN AUDIO IN If you want to connect to an Amplifier please refer to the Amplifier connection page See pages 17 to 18 The number and position of terminals may vary depending on the TV set Please refer to the user s manual of your TV ENG 14 CONNECTIONS Connection to a TV Interlace Connecting to your TV using Component video cables You will enjoy high quality and accurate color reproduction images Component video separates the picture element into black and white Y blue Ps red Pa signals to present clear and clean images Audio signals are delivered through the audio output 1 Using component video cables not included connect the COMPONENT VIDEO OUT terminal on the rear of the DVD VCR to the COMPONENT IN terminal of your TV 1 FROM ANT 2 Using the audio cables connect the AUDIO red and white OUT terminals on the rear of the seoce DVD VCR to the AUDIO red and white IN terminals of your TV i White Red pue Turn on the DYD VCR and TV Greer 2 Red r wos lt Audio Cable Component Cable 3 not inclu
70. y exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Use only with cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over 13 Unplug this apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped ENG 2 NOM CoP BEFORE YOU START Before you start Accessories ae Remote Control Batteries 2EA Video Audio Cable Antenna Cable User s Guide Registration Card AK59 000210 1 5V AAA AC97 01746A AC39 420014 AC43 12002H install Batteries in the Remote Control 1 Open the battery cover on the back of the remote control 2 Insert two AAA batteries Make sure that the polarities and are aligned correctly 3 Replace the battery cover if the remote control doesn t operate properly Check the polarity of the batteries Dry Ceil Check if the batieries are drained Check if remote control sensor is blocked by obstacles Check if ther

Untitled

Contents

Download Pdf Manuals

Related Search

Related Contents