Home

Ultrasonic Anemometer

Contents

1. SDI 12 active mA typ standby 2 mA typ 2 RS 232 active 501 12 active 9 typ standby 8 mA typ 21300 RIDGETOP CIRCLE 703 406 2800 STERLING VA 20166 703 406 2801 FAX WWW SUTRON COM SALES SUTRON COM VAISALA www vaisala com HMP155 Humidity and Temperature Probe M BIN HMP155 with a new stable HUMICAP 180R sensor and an additional temperature probe New probe for reliability The new Vaisala HUMICAP Humidity and Temperature Probe HMP155 provides reliable humidity and temperature measurement Long term stability The HMP155 has a new generation Vaisala HUMICAP 180R sensor that has excellent stability and withstands well harsh environments The probe structure is solid and the sensor is protected with a sintered teflon filter which gives maximum protection against liquid water dust and dirt Warmed probe and high humidity environment Measuring humidity reliably is challenging in environments where humidity is near saturation Measurements may be corrupted by fog mist rain and heavy dew A wet probe may not give an accurate measurement in the ambient air This is an environment to which Vaisala has designed a patented warmed probe for reliable measuring As the sensor head is warmed continuously the humidity level inside it stays below the ambient level Thus it also reduces the risk of condensation forming on the probe Fast temperature
2. Acushioning spring system pro tects the load cell from damage from impact for example The electrical supply and output interfaces are protected against overload Anti freeze prevents freezing operation without compro mise even in areas with high levels of snow and frost Ring heating optionally available no formation of snow caps Possibility of power supply using solar energy can also be used at self sufficient measuring stations even with snow and hail Wolcome to the quided accuracy toot Rui Rate ma wq AM MALA APA Ii iar ales dal died tha DUI Tr i r dnd qt mores gere pea the beastie ee 108 i erg thes at aed af the Paves ee ee een apa bo rei mja B SLE rae ses Ceca chats F Tua Sal cg iaai Me The OTT Pluvio operating software is menu driven and allows simple functional checks and accuracy tests on location using a notebook computer The power supply is simply provided via USB Technical Data General data Types of precipitation Collecting area Collection volume Sensor element Interfaces USB serial interfaces Digital outputs Measurement output Electrical and mechanical data Power supply Power current consumption Ring heating optional Dimensions x OTT Pl
3. Setting standards with the OTT Pluvio It does not matter whether it is drizzle or a cloudburst sleet hail or snow the new OTT Pluvio reliably and accurately measures both the amount and the intensity of liquid solid and mixed pre cipitation It works according to the balance principle taking account of external factors such as temperature and wind that could distort the results Both digital outputs impulse 0 1 mm and status and the serial interface freely configurable as SDI 12 or RS 485 are available for transferring the data Ready for anything When collecting climate data throughout the world different demands are made regarding the bucket orifice of the rain gauge OTT Pluvio 200 Bucket orifice 200 cm measuring capacity 1500 mm ring heating optional High precision technology and robust design provide high accu racy and complete reliability Load cell and sensor electronics are reliably protected from damaging environmental influences We have designed the carrier bucket and protective housing parts to be particularly robust and we have ensured the use of high qual ity materials And the best thing is The OTT Pluvio saves valu able time as it not only provides precise precipitation data but is also practically maintenance free How s that for a benchmark In accordance with the standards applicable in the world we therefore offer the OTT Pluvio in two versions OTT Pluvio 400 Bucket orifice 400 cm
4. measuring capacity 750 mm The balance measuring process Below the collecting bucket and well protected from damaging environmental factors there is a high precision hermetically sealed load cell in stainless steel This measures the total weight on it The sensor electronics attached use the measured value to calculate the net weight of the precipitation collected and to derive the temperature com pensated amount and intensity An integrated temperature sensor provides the current environmental temperature at the time The raw data obtained is subjected to a plausibility check by the OTT Pluvio Factors affecting the result such as wind are eliminated by using a mathematical algorithm thus providing adjusted pre cipitation data Innovative professional and practical Developed in conjunction with technologically leading meteoro logical services the OTT Pluvio fulfills the highest expectations and at the same time stands out with relatively low operating costs A price performance ratio that will convince you Accurate and stable long term Fulfills all requirements of WMO manual 306 No 8 WMO World Meteorological Organisation E Calibration of the load cell and sensor electronics is valid for the life of the unit E The individual temperature characteristic curve of the load cell is continually and drift free compensated during the measurement Measurement accuracy of 0 1 mm for the whole l
5. 0 40 RH uncertainty 20 C 68 F 1 0 RH 40 97 RH Defined as 2 standard deviation limits Small variations possible see also calibration certificate 20 440 C 4 104 F 40 20 C 40 4 F 440 460 104 140 F 60 40 C 76 40 F Recommended humidity sensor HUMICAP 180R C Response time at 20 C in still air with a sintered PTFE filter 63 20s 90 60s TEMPERATURE Measurement range Accuracy with voltage output at 80 460 C 112 140 F 80 20 0 226 0 0028 x temperature C 20 60 C 0 055 0 0057 x temperature C passive resistive output according to IEC 751 0 1 0 00167 x Itemperaturel C 1 3 Class B RS485 output 80 20 C 0 176 0 0028 x temperature C 20 60 C 0 07 0 0025 x temperature Accuracy over temperature range opposite Temperature sensor Pt100 RTD 1 3 Class B IEC 751 Response time with additional temperature probe in 3 m s air flow 63 lt 20 5 90 lt 35 OTHER VARIABLES dewpoint frost point temperature wet bulb temperature mixing ratio For more information visit wwwvaisala com or contact us at sales vaisala com VAISALA General Operating temperature range storage temperature range 80 60 C 112 140 F 80 460 C 112 140 F Connection 8 pin male M12 connector Connection cables 3 5 10 and 30 m Cable material PUR Wire size AWG2
6. 20 00 1 600 00 mm 6 00 1 800 00 mm h 0 10 30 mm min 0 10 500 00 mm 20 00 850 00 mm x 0 1 mm 0 1 mm min or 6 mm h 0 01 mm and 0 01 mm min or mm h 1 minute HT 18 seconds NRT 5 minutes 6 seconds 60 minutes measured value display configuration diagnosis firmware update guided accuracy test real time NAT non real time units can be configured in mm or in inch and C or F OTT Your partner for Water level measurement in ground and surface water Discharge measurement Precipitation measurement Water quality measurement Data management and communication HydroService consulting training installation and maintenance H OTT OTT MESSTECHNIK GmbH amp Co KG Ludwigstrasse 16 87437 Kempten Phone 49 0 831 5617 0 Fax 49 0 831 561 7 209 info ott com www ott com We reserve the right to make technical changes and improvements without notice 70 020 020 R E Version 03 04 2008 Measuring hydrometeors with Parsivel Parsivel is a modern laser based optical system for measuring all types of precipitation completely and reliably Hydrometeors are differentiated and are classified as drizzle rain sleet hail snow and mixed precipitation Precipitation measurements are carried out with a special sen sing head developed for this purpose It detects precipitation optically one meter above ground level other heights are available on requ
7. Edition 2 TIPPING BUCKET RAINGAUGE E 010 933 E MODEL TB3 World standard 200mm catch Accuracy not affected by rainfall intensity Bucket sizes 0 01 inch 0 2mm 0 5mm 1 0mm Long term stable calibration Stainless Steel leaf sieve filter resists blocking Optional internal Data Logger with no external power requirement In build discharge outlets at base for water collection and analysis Dual output signal for data collection and transmission World class meteorological instrument Easy to service with low maintenance requirement ISO 9001 HYDROLOGICAL SERVICES PTY LTD auarysysrey HYDROLOGICAL INSTRUMENTS amp EQUIPMENTS LL CERT DESIGNED AND MANUFACTURED Encre BY HYDROLOGISTS Description The Hydrological Services Tipping Bucket Raingauge is recognised as the world standard for measuring rainfall and precipitation in remote and unattended locations The integrated syphon mechanism delivers high levels of accuracy across a broad range of rainfall intensities Each unit consists of a collector funnel with stainless steel leaf sieve an integrated syphon control mechanism an outer enclosure with quick release fasteners and base which houses the tipping bucket mechanism The unit includes dual output reed switches with varistor protection as well as dual rainfall discharge outlets for water collection and or analysis The bucket tips when precipitation of 0 01 inch 0 2mm 0 5mm or
8. Registered 5041 YEG UK Copyright Gill Instruments 2012 1390 0033 Iss 1 Gill Instruments Ltd Reg No 3154453 Registered Office The George Business Centre Christchurch Road New Milton BH25 6QJ WindObserver OPTIONS 1 Connector A Analogue 2 Cable Gland 2m Cable B Non Analogue 3 Gland 10m Cable 4 Gland 15m Cable Product Code 1 No Base Mount 2 Base Mount Short 3 Base Mount Long 4 Pipe Mount 65 65 m s 1 No Heating 70 70 m s 2 Standard Heating 75 75 m s 3 Enhanced Heating Product options may be model specific Consult the Gill sales team for availability Connection Options Drawings below shown without base mounts WindObserver fitted with integral connector WindObserver fitted with cable gland and flying lead Cable length options 2m amp 10m Base amp Pipe Mount Options Base Mount Short Base Mount Long Pipe Mount M5 CLEARANCE HOLES M5 CLEARANCE HOLES M5 CLEARANCE HOLES a 29 1 1 INCH NPT THREADED HOLE 57 00 100 00 100 00 65 00 65 00 65 00 50 50 INSTRUMENTS Gill Instruments Ltd www gill co uk Saltmarsh Park 67 Gosport Street Lymington Hampshire UK 5041 Copyright Gill Instruments 2012 T 44 0 1590 613 500 44 1590 613 555 E anem gill co uk 1390 0035 Iss 1 Gill Instruments Ltd Reg No 3154453 Registered Off
9. Temperature resolution 0 1K Interfaces Relative humidity resolution 0 1 96 Ba drate 2400 bps constant Accuracy x 0 15 K from 20 C to 50 C N E a orm RS232 electrically isolated 0 25 from 65 C to 20 C without hardware handshake Operating Voltages 10 15 V DC 48 VAC or RS485 electrically isolated Weight 9 5 kg please specify when ordering Data Storage EMV Data memory approx 3500 data records ESD EN61000 4 2 corresponding to 10 minute 8 kV contact discharge measuresmentes for 24 days 15 kV discharge through the air Modes of operation 4 diff operating modes Burst EN61000 4 4 for convenient data access 2 kV 5 50 ns 5 kHz Power supply Surge EN61000 4 5 Mains supply 12 VDC 350 mA peak 140 mA mean value 48 VAC max 3 6 A for heating Dimensions All measurements in mm outrigger i e Letrona LSTH 80 adf 3 ca 285 0 Details for ordering e Thermo Hygrometer VTP37 RS485 MGE VTP37 00 e Thermo Hygrometer VTP37 RS232 MGE VTP37 01 e VTP37 Airport RS485 MGE VTP37 03 VTP37 Airport RS232 MGE VTP37 02 e replacement fan including heating BGM METEO TP0169 meteolabor reserves the right to make changes without further notice Hofstrasse 92 Phone 41 44 934 40 40 CH 8620 Wetzikon meteolabor ag Fax 441 44 934 40 99 Internet www meteolabor ch E Mail info meteolabor ch Bulletin 52
10. Trials carried out over the past year have confirmed that errors under adverse conditions are typically half those compared to similar shields Key Features Accuracy in trials comparable to Stevenson Screens Less sensitive to rainfall e Improved protection against wind blown precipitation e Secure sensor installation with stable mounting mechanism e Durable UV stable plastic power required ive VAISALA P O Box 26 FIN 00421 Helsinki FINLAND Tel 358 9 894 91 Fax 358 9 8949 2485 Email industrialsales vaisala com www vaisala com Vaisala Weather Transmitter WXT510 The Most Essential of Weather The Vaisala Weather Transmitter WXT510 is acompact and lightweight multi sensor instrument that measures the most essential weather parameters Itis a configurable product that can measure wind speed and direction liquid precipitation barometric pressure temperature and relative humidity all in one transmitter Affordable weather intelligence The demand for accurate weather information is constantly increasing In addition to professional meteorology there are also numerous businesses that are weather sensitive even though measuring the environment is not their actual core operation To meet the growing needs for easy to access weather data the Vaisala Weather Transmitter WXT510 has been developed It combines the modern The Vaisala Weather Transmitter WXT510 makes building weather sta
11. With an impact resistant corrosion free aluminium alloy housing and optional INSTRUMENTS heating system this wind sensor is recommended for use in harsh environmental conditions and is particularly suited to both marine and land based installations The WindSonic M has no moving parts offering maintenance free operation in a wide range of applications Wind Speed 2 O12 001 002 knot Threshold 0 01 m s Direction Measurement Ultrasonic Output Rate 0 25 0 5 1 2 or 4 Hz Parameters Wind Speed amp Direction or U and V vectors Output Outputs RS232 RS422 RS485 NMEA Baud Rate 2400 to 38400 Power Requirement 5 30V DC 5 5mA 12V 24V AC DC 4 2A 24V Start up time 5 seconds NMEA 0183 Consult the technical manual for optimum heating supply voltage Download software free from www gill co uk Anemometer Optional heating Mechanical Environmental 35 to 70 without heating 5 to 10096 RH EN 61326 1998 amp BSEN 60945 Impact Resistance UL2218 Class 1 Operational Factory Calibration Traceable to National Standards Accessories Pipe Mounting Windview Software Cables Display 44 45mm 1 75 in diameter Available to match output options See Gill display datasheet VVindSonic hM Ultrasonic Wind Sensor Typical Applications mM Remote weather monitoring stations E Environmental field sites E Buil
12. also available e flange mounting arrangement is provided as standard with option to order a different mounting e Wind tunnel calibration in accordance with ISO 16622 and traceable to national standards e Travelling case 40 C To 70 0 01 C Range Resolution ANALOGUE OUTPUTS OPTIONAL Resolution 12 bits or 14 bits 4 channels available Selectable Range User selectable full scale wind speed Output Type 0 20mA 4 20mA 0 5V 2 5 5V ANALOGUE INPUTS OPTIONAL Resolution 12 bits or 14 bit Up to 4 single ended or 2 diffferential Input Type 5V 1 0 kg 750mm x 240mm Environmental IP65 40 C to 70 C lt 5 to 100 Operation to 300mm hour Emissions BS EN 61000 6 3 Immunity BS EN 61000 6 2 Accuracy spec applies for wind speed and for wind incidence up to 30 from the Operating Temp Humidity Precipitation EMC horizontal This range is in continuous development and therefore specifications may be subject to change without prior notice D1300 Gili R3 50 INSTRUMENTS Ultrasonic Research Anemometer ALL WEATHER SENSING TECHNOLOGY WIND TURBULENCE MEASUREMENT 50 Hz DATA RATE COMPONENT WIND VELOCITY UVW m CUSTOM CALIBRATED WIND PROFILING m ANALOGUE OUTPUTS m MAINTENANCE FREE SPEED OF SOUND AND SONIC ROBUST CONSTRUCTION TEMPERATURE OUTPUTS RM u I n RM www gill co uk R3 50 ULTRASONIC RESEARC
13. changes and errors excepted e PRODUCT INFORMATION soM e MESS SYSTEMTECHNIK Properties and Advantages Registration of the snow parameters e Snow depth e Snow density e Snow water equivalent Contents of liquid water and ice System assembly on demand e Information above the whole snow cover Information above a specific snow depth level Information above an extended area by measuring with up to 4 SPA sensors No measurement errors caused by ice lay ers in the snow cover Simple and convenient installation even at hillsides Automatic continuous measurement Energy saving sensor operation e Standby between the measuring phases Optimum for solar powered stations Produktinfo SPA V004 DEU ENG indd 1 e 21 06 2010 16 21 07 NENNEN e PRODUCT INFORMATION SPA S MESS STSTEMTECHMHMIK Area Multiple SPA sensors are installed in a star shape The measurement values of the sensors are ave raged and supply information with a high spatial extent as it is used for example to calibrate remo te sensing data Example for application The SPA system measured high resolution data in the winter season 2006 2007 for the parameters snow water equivalent snow density snow depth and liquid water content of the snow pack The snowmelt period in april is the most interesting pe riod First the snow depth is decreasing A then th
14. control 0 04 mis Offset 0 01 m s Direction 525 12 m s 1 for turbine control Measurement Flexible 1 3600 seconds Power Requirement Anemometer only 9 30 VDC 60mA max 50mA average Digital Output Mechanical External construction Stainless steel 316 Refer to diagram overleaf Weight 1 7kg with 2m cable 1 3kg with connector Environmental lt 0 to 100 RH Approvals Standards Traceable to NAMAS standards Site calibration None required Integrity check unit Zero wind supplied as optional extra VWindObserver 75 Ultrasonic Anemometer Typical Applications E Building controls structural safety Wind turbine control High altitude mountainous regions E Road amp rail tunnels transport safety E Arctic Antarctic Weather monitoring E Ports amp Harbours Marine vessels dynamic positioning systems Aircraft landing systems 213mm 8 4 io Top view 56 8mm 2 23 dia ee Note Optional base mounts and cable exit options are available Specifications may be subject to change without prior notice Gill Instruments Ltd T 44 0 1590 613 500 Saltmarsh Park F 44 1590 613 555 67 Gosport Street E anem gill co uk Lymington ISO 9001 Hampshire www gill co uk Registered 5041 JEG UK INSTRUMENTS Copyright Gill Instruments 2012 1390 0034 Iss 1 Gill Instruments Ltd Reg No 3154453 Registered Office The George Busines
15. hailstone detected Output resolution 10s Hail intensity one minute running average in ten second steps Output resolution 0 1 hits cm h 1 hits in h Units available hits cm h hits in h hits h Due to the nature ofthe phenomenon deviations caused by spatial variations may exist in precipitation readings especially in short time scale The accuracy specification does nor include possible wind induced error PTU module Barometric Pressure Air Temperature and Relative Humidity Barometric Pressure Range 600 1 100 hPa Accuracy 0 5 hPa at 0 30 C 32 86 F 1 hPa at 52 60 C 60 140 F Technical Data Dimensions Output resolution Units available 0 1 hPa 10 Pa 0 0001 bar 0 1 mmHg 0 01 inHg hPa Pa bar mmHg inHg Air Temperature Range Accuracy for sensor element at 20 C 68 F 52 60 C 60 140 F 0 30105 70 Accuracy over temperature range see graph Power Supply Input Voltage 9 00 VDC Power consumption on average minimum 0 07 mA 12 VDC in SDI 12 mode maximum 13 mA 30 VDC with continuous measurement of all parameters typical 3mA 12 VDC with default measuring intervals Heating voltage options DC AC full wave rectified AC recommended ranges 12 VDC 20 1 1 A max 24VDC 20 0 6 A max 68V 20 AC 0 6 A max 34 20 f wrect AC 0 6A max absolute max 30 VDC 84V AC 42V w rect AC Electromagneti
16. intensity and duration of the rain all in real time Due to the measurement method flooding clogging as well as wetting and evaporation losses in rain measurement are eliminated The Vaisala RAINCAP Sensor is the only maintenance free precipitation sensor on the market The WXT510 measures accumulated rain fall rain intensity and duration of the rain in real time The patented ultrasonic based Vaisala WINDCAP Sensor ensures accurate wind measurement from all wind directions Barometric pressure temperature and humidity sensors are combined in an advanced PTU module placed inside the specially designed radiation shield WEATHER MULTI SENSOR PTU module for barometric pressure temperature and humidity Barometric pressure temperature and humidity measurements are combined in an advanced PTU module utilizing capacitive measurement method for each parameter Barometric pressure is measured using the silicon based Vaisala BAROCAP Sensor The sensor has minimal hysteresis and excellent repeatability as well as outstanding temperature and long term stability The measurement range for pressure is from 600 to 1100 hPa Temperature measurement is based on the ceramic Vaisala THERMOCAP Sensor The measurement range is from 52 to 60 Humidity measurement is based on the Vaisala HUMICAP technology The Vaisala HUMICAP Sensor is highly accurate and it offers excellent long term stability in
17. interface ensures universal application e Intelligent processing of measurement readings for compensation and filtering of effects of the weather e Watertight design for outdoor use in the open air Hydrology Meteorology Geology MESS SYSTEMTECHNIK Technical specifications USH 8 Measurement range Snow depth Measurement range Temperature Functions Interface Analog Interface Digital Power supply Lightning protection Range of application Housing Protection rating Installation Copyright 2006 Sommer All rights reserved Content may be changed without notice Pictures drawings and other graphic images are for illustration only and do not represent product configuration Subject to deliverability technical changes and errors excepted Version 002 PRODUCT INFORMATION Snow Scale for Snow Water Equivalent SWE measurement 4 05 12 2008 05012010 2200 oe za 2010 2000 0505 2000 0556 2210 Snow Scale Snow Pillow Seow Depth soM er UBER ON Functions and advantages Automatic Measurement of Snow Water Equivalent SWE Realistic represenation of actual snow High representativness of the measured value and minimisation of ice bridging effect Optimised thermal flow between sensor and ground for high accuracy during the melting process Reli
18. is in continuous development and therefore specifications may be subject to change without prior notice D400 all R3 100 INSTRUMENTS Ultrasonic Research Anemometer ALL WEATHER SENSING TECHNOLOGY WIND TURBULENCE MEASUREMENT CUSTOM CALIBRATED COMPONENT WIND VELOCITY UVW m ANALOGUE OUTPUTS WIND PROFILING SPEED OF SOUND AND SONIC m MAINTENANCE FREE TEMPERATURE OUTPUTS ROBUST CONSTRUCTION m OPTIONAL ANALOGUE AND PRT m 00 Hz DATA RATE INPUTS RM u I n RM www gill co uk R3 100 ULTRASONIC WIND SENSOR The R3 100 combines the latest electronic components with Gill Instrument Ltd s considerable experience in producing solid state ultrasonic anemometers for micrometeorological research It take as its pedigree the world leading Solent Research R2 which have been proven time and time again to be consistant and reliable instruments for the study of wind and its turbulance parameters The R3 100 has a faster response time up to l O0Hz and operating system RCOM designed to be robust and simpler to use ULTRASONIC MEASUREMENT Ultrasonic sampling rate 1 00Hz Parameters UVW Speed of Sound WIND SPEED Range and Resolution 0 45m s 0 01 m s Accuracy lt 1 5 Range and Resolution 0 360 I Accuracy sr SPEED OF SOUND 300 370m s 0 01 s Accuracy lt 0 5 20 C RS422 full duplex 8 data bits stop bit no
19. keeps the tipping bucket and the drain tubes from freezing up While the heater elements are turned on the status LED flashes at 8 flashes per second For more information about the operation of the TB Heater please refer to the manual SPECIFICATIONS Ambient temperature range 40 C to 70 C 40 F to 158 F Snow sensor and heater operating parameters Between 15 C to 4 C 14 F to 39 F Average power generated 35 watts 150 watts during initial minute warm up Voltage requirements Main Power 1OVDC to 30VDC 12VAC to 28VAC SDI 12 Power 9 6VDC to 16 SDI 12 standard SDI 12 Interface optically isolated 1200 baud 7 bits even parity Power generated and current requirements 12 VDC 45 watts average 70 watts when heater is on 3 7 amps average approx 65 duty cycle 5 8 amps when the heater is on Average weekly energy consumption Assume 4 x 10 hour snow storms in a week Energy 4 x 10x 45W 1800 Watt hours week AmpHours 4 x 10 x 3 7A 150 AmpHours over 1 week Which averages to 150Ah 24 x 7 0 9 Amps Average over a week Specifications are subject to change at anytime without notice Aq poynqrnsiq Export 1 07 ACCUBAR AJ BAROMETRIC PRESSURE SENSO HIGHLY ACCURATE SOLID STATE PRESSURE TRANSDUCER FEATURES E Low power design makes it ideally suited for remote monitoring applications Capable of operating from elevations of 120
20. measurement What s more with its fast response time the additional temperature probe for the HMP155 is ideal for measurement in environments with changing temperatures Features Benefits Vaisala HUMICAP 18OR sensor superior long term stability a Optional warmed humidity probe Plug and play Chemical purge USB connection for service use a Installation kits for DTR13 and DTR5O 2 radiation shields and also for a Stevenson screen Weather proof housing IP66 New fast temperature probe Different output possibilities voltage RS 485 resistive PtIOO Applications meteorological applications aviation and road weather instrumentation Long lifetime Protecting the sensor from scattered and direct solar radiation and precipitation will increase its lifetime Thus Vaisala recommends installing the HMP155 in one of the following radiation shields DTR503 DTR13 or a Stevenson screen Easy maintenance The probe can be calibrated using a pc with a USB cable with the push buttons or with the MI70 indicator Technical data Performance RELATIVE HUMIDITY Measurement range Accuracy incl non linearity hysteresis and repeatability at 15 425 59 77 F 0 100 RH 1 RH 0 90 RH 1 7 RH 90 100 RH 1 0 0 008 x reading RH 1 2 0 012 x reading RH 1 2 0 012 x reading RH 1 4 0 032 x reading RH Factory calibration 0 6 RH
21. power requirement In built discharge outlets at base for water collection and analysis Dual output signal for data collection and telemetry World class meteorological instrument Easy to service with low maintenance requirement ISO 9001 HYDROLOGICAL SERVICES PTY LTD HYDROLOGICAL INSTRUMENTS amp EQUIPMENTS DESIGNED AND MANUFACTURED E BY HYDROLOGISTS Description The Hydrological Services Tipping Bucket Raingauge model TB6 is recognised as the world standard for measuring rainfall and precipitation in remote and unattended locations Each unit consists of a collector funnel with Leaf filter an integrated flow control mechanism an outer enclosure with quick release fasteners and base which houses the tipping bucket mechanism The unit includes dual output reed switches with varistor protection as well as dual rainfall discharge outlets for water collection and or analysis The bucket tips when precipitation of 0 01 inch 0 2mm or 0 5mm has been collected Each tip activates a reed switch closure which is detected by a Data Logger and or Telemetry System The Tipping Bucket Raingauge can be used in conjunction with Hydrological Services data logger model ML The logger is rugged and compact it records the date and time of occurrence of tips from the raingauge up to 100 000 events with 1 Second Resolution can be stored in the ML1 s memory The data is stored in a flash EPROM figure TB6 ba
22. the effect of rain on the condition of the disposal sites in conjunction with other sensors e g ground condition probes The degree of dimming is a measure of the size of the hydrometeor and together with duration of the signal the fall velocity can be derived precipitation in the melting layer Comprehensive precipitation analysis using 2 dimensional distribution of size and velocity Special measuring head prevents secondary spectra caused by drops splashing on the sensor head Transmitter and receiver head in perfect design with no obstacles for precipitation catching Monitoring road conditions Highly localised precipitation can lead to aquaplaning or packed snow on roads herefore rapid traffic warning and control Systems are necessary in order to prevent accidents Precipitation measurement hydrometeor composition and atmospheric visibility are of considerable importance in such systems Parsivel is an integrated instrument that measures all these quantities Flood early warning To assure a timely warning of impending high water it is necessary to measure the amount and spatial distribution of precipitation rapidly and accurately This goal can be achieved by combining weather radar measurements spatial information with reduced accuracy and groundbased disdrometer measurements Parsivel provides drop size distributions on the ground and a function to derive a local relation ready to be used to adjus
23. 0 First Class First class pyranometer for solar energy test applications 5 Hukseflux 4 Thermal Sensors net radiometer 4 component net radiation sensor 4 component SW amp LW sensor RAO1 radiometer 2 component radiation sensor 2 component SW amp LW sensor DRO1 pyrheliometer ISO 9060 First Class First class pyrheliometer DRO2 pyrheliometer ISO 9060 First Class Fast response first class pyrheliometer with heated window 1 sec rapid response sensor SRAO1 albedometer Albedometer compliant with ISO and WMO standards 2 Second Class SRO1 model pyranometers mounted back to back on the same housing IRO2 pyrgeometer Pyrgeometer with heating IRO2 TR Pyrgeometer with heating with integrated transmitte Burnaby British Columbia 604 872 7894 Burlington Ontario 905 333 5510 Montreal Quebec 514 735 5267 Hukseflux Thermal Sensors Figure 1 HFPO1 heat flux plate dimensions 1 sensor area 2 guard of ceramics plastic composite 3 cable standard length is 5 m All dimensions are in mm HFPO1 HEAT FLUX PLATE HEAT FLUX SENSOR is the world s most popular sensor for heat flux measurement in the soil as well as through walls and building envelopes By using a ceramics plastic composite body the total thermal resistance is kept small HFPO1 serves to measure the heat that flows through the object in which it is incorporate
24. 0 feet below sea level to 13 000 feet above sea level Wide temp range 45 C to 60 C E Low power consumption B Solid state construction B Low cost B Light weight aluminum construction E RS 232 SDI 12 and Analog 0 5 VDC outputs ORDERING 5600 01 20 1 Pressure Sensor Barometric RS 232 and SDI 12 outputs 5600 01 20 2 Pressure Sensor Barometric RS 232 SDI 12 and Analog O 5VDC outputs SUTRON notice RANGE ELEVATION ACCURACY RESOLUTION AV TIME TEMP RANGE SUPPLY POWER OUTPUT RS 232 DATA PRESSURE UNITS SPECIFICATIONS Specifications subject to change without 600 to 1100mB hPa 17 7 to 32 5 in Hg 1200 to 13 000 feet O 5mB hPa Consult factory for greater accuracy 0 01mB O to 240 seconds user selectable 45 C to 60 C 8 to 28VDC reverse polarity protected Standard 1 RS 232 and SDI 12 Optional 2 RS 232 SDI 12 and Analog 0 5VDC accuracy 7mV Continuous or on demand COMMUNICATION 1 200 baud even parity 7 data bits one stop bit mB hPa kPa in Hg mm Hg ATM psi user specified units DIMENSIONS 3 14 in x 2 95 in x 2 24 in excluding connectors and cable WEIGHT lt 1 Ib VIBRATION 0 5g 10 50Hz PRESSURE FITTING Hose barb for 3 16 in ID hose ELECTRICAL Cable gland for 1 4 in cable to CONNECTION terminal block for 16 to 28 AWG wire POWER CONSUMPTION 1 RS 232 active 17 mA typ
25. 1 0mm has been collected Each tip is marked by a reed switch closure and sorted to a Data Logger and or used by a Telemetry System The Tipping Bucket Raingauge can be used in conjunction with Hydrological Services data logger model ML The logger is rugged and compact it records the date and time of occurrence of tips from the raingauge up to 100 000 events with 1 Second Resolution can be stored in the ML1 s memory The data is stored in a flash EPROM The ML fits inside the model TB3 Raingauge Its compact design makes it ideal for incorporation into any piece of equipment where intelligent data acquisition and logging are required Accessories Description Part No Data Logger MLI MLI FL RS232 to USB Converter DL307 Field Calibration Device TB320 FCD TB3 Heater Kit TB323 TB3 Bird Guard TB333 TB3 Pole Mounting Bracket TB334 Specifications Receiver 200 mm 0 3 diameter machined aluminium rim Powder coated Bucket capacity 0 2 mm 0 5 mm 1 0 mm 0 01 inch of rainfall Sensitivity one tip Measuring range 0 to 700 mm hr Calibration accuracy 2 for intensities from 25 to 500 mm hr Long term stable calibration Humidity to 100 90 Temperature 20 to 70 Contact system dual reed switches potted in soft silicon rubber with varister protection Max Capacity 12 VA 0 5 amp max Resistance Initial contact resistance 0 1 OHMS M T B F 10 to 10 Operations Syphon 0 4 mm capac
26. 6 USB connection cable MI70 connection cable Service cables Additional T probe cable length 2m Housing material PC Housing classification IP66 Sensor protection sintered PTFE Weigth probe 86 g Electromagnetic compatibility Complies with the EMC standard EN61326 1 Electrical equipment for measurement control and laboratory use EMC requirement for use in industrial locations Inputs and outputs Operating voltage Ts 20 VDC Note minimum operating voltage 12V with 0 5 V output and 16V with 0 10V output probe heating chemical purge or XHEAT Outputs voltage output resistive Pt100 4 wire connection RS485 Average current consumption 15 VDC load 100 kOhm VO aV D FOV 0 1 V output 3 mA 0 10V output 40 5 mA RS485 lt 4mA during chemical purge 110 mA with warmed probe max 150 mA Settling time at power up voltage output 25 RS485 35 RS485 output voltage output Ref B210752EN C Vaisala 2009 This material is subject to copyright protection with all copyrights retained by Vaisala and its individual partners All rights reserved Any logos and or product names are trademarks of Vaisala or its individual partners The reproduction transfer distribution or storage of information contained in this brochure in any form without the prior written consent of Vaisala is strictly pr
27. 76 Up to down variation 396 Response time 45s to 95 Supply 5 5 14 5 VDC 3mA Spect range 0 3 1 15 SK01 D 0 4 to 0 7 SKO1 DP Sensitivity 1 0mV W m 2 SK01 D 0 5mV pymol 1 2 SK01 DP Directional resp x30W m 2 Sensitivity 200 V W m 2 5 08 1 0mVAW m 2 SK08 E Spectral range 0 3 to 3um Directional resp lt 20W m 2 Response time 11s to 95 SK08 E supply 5 5 14 5VDC Sensitivity 150 V W m 2 EQ08 1 0mV AW m 2 08 Spectral range 0 3 to 3um Directional resp lt 20W m 2 Response time 11s to 95 EQ08 E supply 5 5 14 5VDC Sensitivity 17uV W m 2 EQ08 S 1 0mV W m 2 EQ08 SE Spectral range 0 3 to 3um Directional resp x10W m 2 Response time 15s to 95 08 5 supply 5 5 14 5VDC Specifications similar to EQ08 Separate Up Down outputs Supply 5 5 14 5 VDC 12W Sensitivity 25mV W m 2 UVR1 A 500mV W m 2 UVR1 B Resolution lt 0 1 of fullscale Directional resp lt 2 sideband error 5 typical Supply 5 5 14 5 VDC 20mA Sun threshold 120W m 2 15 Uncertainity lt 0 1 hour Sunshine 5V output No sunshine OV output sensitivity 210 VAN m 2 Ther conductivity 0 4W m C Response time 30s to 95 Temp range 20 to 70 Temp coeff 0 2 C FOV 5 SP02 2 5 SP02 L aerosol 412 500 675 862nm ozone 368 500 610 778nm water 500 778 812 862nm Response time 0 2s to 95 Resolution 0 0050D
28. H ANEMOMETER The Solent Research R3 50 is a cost effective solution for projects requiring the benefit of Gill s proven experience in the production of ultrasonic anemometers for all weather applications Robust and easy to use the R3 50 employs the same software as the popular R3 range of sensors but with a data rate of 50 Hz If required the unit can be supplied with the optional Sensor Input Unit for analogue inputs and Power Supply including analogue outputs Based on the highly successful range of Solent Research Anemometers the R3 50 is ideal for users undertaking research ULTRASONIC MEASUREMENT 50 Hz Parameters UVW Speed of Sound 0 45 m s 0 01 m s Accuracy lt 1 RMS 0 359 1 lt Ultrasonic output rate Range amp resolution Range amp resolution Accuracy 300 370 m s 0 01 m s Accuracy 0 5 20 RS422 full duplex 8 data bits stop bit no parity 2400 115200 Output rate Selectable 0 4 to 505 Quantity 7 U V W SoS PRT plus 2 analogue inputs 10 20 30 60 m s 0 4 to 50s t 2 5V 14 bits Accuracy lt 0 1 of FSR ANALOGUE INPUTS requires SIU Quantity Range amp resolution Communication Baud Rates Scale Update rate Range and resolution 6 differential inputs 50s 5V 4 bits lt 0 1 of FSR Sampling rate Range and resolution Accuracy GILL INSTRUMENTS LTD Saltmarsh Park 67 Gosport Street Lymington Ham
29. OGICAL INSTRUMENTS amp EQUIPMENT DESIGNED AND MANUFACTURED BY HYDROLOGISTS DESCRIPTION The Hydrological Services Tipping Bucket Heater has been designed for use with the Hydrological Services Tipping Bucket Raingauges The device is a thermostatically controlled heating element that raises the temperature of the interior of the raingauge funnel and catch to avoid the freezing of the gauge in cold climates with subsequent loss of precipitation records When the ambient temperature drops below a preset value 4 C the snow sensor in the funnel is activated The heating elements remain OFF until snow is detected in the catch area funnel The heating elements are turned on and off to keep the funnel temperature at the preset Setpoint temperature 10 C This will continue for a minimum preset time 18 mins after there is no snow remaining in the catch The heater will then be switched off and the unit will return to the WAIT mode until triggered by another snow event The system will be de activated when temperature drops below 15 C or above 5 C nominal Snow Sensor Temperature Sensor The combination of snow sensor and thermostatic control of the heater element is designed to conserve power The TB Heater is supplied ready to be installed with no settings required The TB Heater incorporates an SDI 12 interface that allows the operator to configure monitor and manually control the TB He
30. Observer ll provides the best solution on the market for reliable accurate and cost effective wind speed and directional measurement It combines the latest patented advances in ultrasonic technology together with Gill s fifteen years experience as the recognised world leading supplier of all weather ultrasonic wind sensors The elimination of moving parts together with a rugged stainless steel construction means that WindObserver ll is virtually maintenance free and requires no calibration on site The heated head keeps the unit free from ice and snow providing continuous use even in the most extreme weather conditions A new flexible design ensures that the WindObserver II can be configured by the user to their exact requirements which DIMENSIONS Size Weight MEASUREMENT Output Parameters Units Averaging WIND SPEED Range Starting Threshold Accuracy Resolution Offset DIRECTION Range Dead Band Direction Accuracy Resolution SONIC TEMPERATURE Range DIGITAL OUTPUT Communication Baud Rates Formats Anemometer Status 405mm x 210mm 1 5 I Hz 4Hz OHz UV Polar NMEA Tunnel m s Knots MPH KPH ft min Flexible 1 3600 seconds 0 65 m s 0 01 m s 2 0 01 m s 0 01 m s 0 145mph 0 359 None 2 59 40 C to 70 refer to user manual RS422 full duplex 1200 2400 4800 9600 19200 38400 8 data odd even or no parity Supplied as part of standard message GILL IN
31. S e Solar Radiation Barometric Pressure O Pires elim Wea E O Windspeed O lemperature O Ultrasomie Mechanical Ame MOM eters II p 3 Q Integra ted HOSK Weather Stations D GU WindSonic INSTRUMENTS Wind Speed amp Direction Sensor WINDSONIC LOW START SPEED CORROSION FREE UV STABLE MATERIAL NO CALIBRATION REQUIRED ROBUST CONSTRUCTION TRUE 0 359 OPERATION no dead band WIND SPEED amp DIRECTION FROM SINGLE UNIT ALL WEATHER SENSING TECHNOLOGY MAINTENANCE FREE 2 YEAR WARRANTY AGRICULTURE HVAC POLLUTION CONTROL PORTABLEWEATHERSTATIONS ROADSIDEWEATHERSTATIONS TUNNELS MARINE www gill co uk WINDSONIC ULTRASONIC WIND SENSOR At last a real low cost alternative to conventional cup vane propeller wind sensors in a single unit WindSonic from Gill Instruments Utilising our expertise as the world s leading sonic manufacturer WindSonic is based on our existing highly successful proven ultrasonic technology Ideal for applications that demand economic wind sensing WindSonic is suitable for land based and marine environments A lightweight unit WindSonic is of a robust high strength construction designed to withstand installation and use with no fear of the damage commonly experienced with more fragile cups vanes or propellers Without the need for expens
32. STRUMENTS LTD Saltmarsh Park 67 Gosport Street Lymington Hampshire 5041 9EG UK Tel 44 0 1590 613500 Fax 44 0 1590 613555 E mail anem gill co uk ii INSTRUMENTS Website www gill co uk Gill Instruments 2005 may include analogue outputs 10 Hz output heating or sonic temperature The Windows based WindCom communications package allows the user to operate the anemometer in various modes permitting the measurement of U amp V vectors or wind speed and direction Communication is via an RS422 bidirectional link which allows several units to be networked together and data to be logged on demand The WindObserver Il has been rigorously tested to internationally recognised standards and meets the stringent performance criteria specified by airport marine oil production meteorological and utility organisations around the world ANALOGUE OUTPUT OPTIONAL 3 speed direction status or sonic temp Multiples of 10 m s up to 70 m s 2 5V 0 5V or 4 20mA V output resistance 60 Ohms 4 20mA loading 10 300 Ohms MATERIALS External Construction Stainless Steel 316 IP66 NEMA4X Operating Temperature 55 C to 70 C 5 to 100 RH 300mm hr EN 61000 6 2 2001 EN 61000 6 3 2001 Icing MILSTD81I0E Method 521 1 Procedure Standards Traceable to NAMAS standards None Required Integrity Check Unit Zero Wind supplied as optional extra 9 30 V DC 40mA 12 V DC 3A Q24V AC or DC Mo
33. TPUTS 20 Hz or 32 Hz 1 2 4 8 10 16 20 amp 32 option m s mph KPH knots ft min UVW Polar or NMEA Averaging Flexible 0 3600 s 0 45 m s 0 01 m s 1 5 RMS Accuracy 12 m s Custom 1 RMS 0 359 Resolution 0 1 Internal sample rate Output rate Units of measure Format Range Resolution Accuracy 12 m s Generic Range Accuracy 12 m s Generic 2 Accuracy 12 m s Custom 0 5 300 370 m s 0 01 m s Accuracy lt 0 5 20 POWER REQUIREMENT 9 30 30 mA 12 Vdc Range Resolution DIGITAL OUTPUT RS232 422 485 network upto 26 anemometers 2400 115200 ASCII Binary Baud rates Format ll GILL INSTRUMENTS LTD Saltmarsh Park 67 Gosport Street Lymington Hampshire 5041 9EG UK Tel 44 0 1590 613500 Fax 44 0 1590 613555 E mail anem gill co uk INSTRUMENTS Website www gill co uk Gill Instruments 2005 Both software and electronics have been enhanced to provide improved vertical W resolution and SOS accuracy New design electronics has facilitated a reduction in power consumption to 30 mA at 12 V dc a significant advantage when used on power sensitive sites A number of orderable options are available including e Increase in data output rate to 32 Hz e 4 analogue output channels with options for 12 or 14 bit resolution e 4 analogue input channels with options for 12 or 14 bit resolution additional PRT input
34. a wide range of environments and negligible hysteresis The measurement range for humidity is 0 100 RH The whole PTU module is replaceable and available as a spare part The PTU module is mounted in a specially designed radiation shield The shield protects the sensors from both scattered and direct solar radiation and precipitation The plastic material in the plates offers excellent thermal characteristics and UV stabilized construction The white outer surface reflects radiation while the black inside absorbs accumulated heat ce VAISALA P O Box 26 FIN 00421 Helsinki FINLAND Tel 358 9 894 91 Fax 358 9 8949 2485 Email industrialsales vaisala com www vaisala com Simple to Install Easy to Integrate wns es c Arang me 10 16 nd 074 06 m TT Mm 216 16 tomay Device Stabat Last 142526 update 00 00 02 vdd Mode WXT510 fesnebe 12630000 pru Vern C14 PTU x4644018 27 219 t 25 6 2003 CAL 18 2 mee 10030 3 Rd ELI Laut updated 142522 update VME 9 9 Healing and sell atas Ran settings O 3 Enable tresru Measures tera Deel Accumdaton 021 fo Bee 000240 iea EE EEE ee 16 x Commune ation protoced Uber part Statue Las updated 1425 23 0 wm f 10012413 Pat ye
35. able light and long life aluminium construction Measure up to 200 500 1 500 mm of SWE Simple and easy installation and setup NO antifreeze liquid required Simple systems integration Flat construction design PRODUCT INFORMATION SGG Description The SGG Snow Scale is a precision Snow Water Equivalent measuring device which is developed for quick and easy installation and implementa tion in the field The SGG uses exactly for SWE measurement designed aluminium plates which garuantee accurate measuring values A broad outer frame of plates minimises the effects of ice Functioning characteristics The working principle of the SGG is based on the measuring principle of load cells The sensor con sists of seven 2 8 x 2 4 m and perforated plates each plate of the size of 0 8 x 1 4 m The center panel and six surrounding panels allow water to percolate through the sensor Water percolation minimizes thermal differences between the sen sor and surrounding panels act to buffer the cen ter panel where SWE is measured from stress Installation guide The SGG is designed for modular and easy in stallation and maintenance in the field The snow scale consists of an intrumented center panel sur rounded by six panels that act to buffer the center panelform edge stress condition Figure 1 Each 2400 Figure 1 SGG snow scale Design soM er MESS SYSTEMTECHNIK bridging commonly experienced late in the mea surment se
36. ance 0 1 OHMS 105 to 10 Operations chrome plated injection moulded ABS bucket balanced to 0 05 gms Retains less than 0 2 ml of water in each bucket after tipping injection moulded non hydroscopic ABB bulls eye level fitted to base three 10 mm diameter mounting holes at 117 mm p c d in feet moulded to outside diameter of base able to attach 12 mm inside diameter tubing to catch rainfall after passing through buckets two stainless steel rolling bearings mounted at 90 degrees to bucket axle stainless steel mesh on all openings to prevent insects and ants entering gauge keyed to enable the release of the outer enclosure without the need for the removal of the three securing screws 300mm Weight 2 kg 4 4 lbs 3 2 Kg 7 16 0 03m Aq paynqiysiq Export 7 07 HYDROLOGICAL SERVICES PTY LTD Field Calibration Device Description In response to field Hydrologists requests for a device to check the calibration of Tipping Bucket Raingauges in the field Hydrological Services have developed a Field Calibration Device It is a light portable device that allows field calibration tests Using this instrument will save field time and money The advantage of using a Field Calibration Device is that the Tipping Bucket Raingauges can remain fixed in their location and are therefore only out of service for a very short period of time The Field Calibration Device has adopted the same basic principles as the Mo
37. ason The use of lightweight aluminum materials minimize thermal resistance improving heat flow throughout the device for better emula tion of natural conditions Integration and connec tion to weahter stations or other signal processing systems are kept easy and simple concentrations that develop along the perime ter of the sensor This systems allows accurate measurement even during periods of rapid snow settlement following large snow accumulations And also when the rate of snowmelt at the sensor snow interface was significantly different from the snowmelt rate at the soil snow interface on the surrounding ground panel is constructed and consists of a top plate of aluminum perforated with holes to allow water flow through the sensor The SGG is supported by angle beams to provide strength and stiffness 2800 PRODUCT INFORMATION SGG S MESS SYSTEMTECHNIK Set up The measuring device can be set up in even in layer of gravel or sensor so in the end the SGG clined up to 5 areas The site should be for is flush with the surrounding ground The support optimal measuring values prepared as followed pedestals and load cells rest on aluminium base Remove the ground and fill the trench with a thin plates placed on this gravel pad Figure 2 maasuring coi Gl plate wiih 4 penes iod conr ca meecung oreo n coming crea aea pone ground height dummies weh sensor sand beding t
38. ater depending on the system requirements It is not mandatory to use the SDI 12 interface but only optional if more detailed information or control is required The SDI 12 interface is optically isolated from the control electronics because the control electronics may be operated from AC and therefore have separate earthing The SDI 12 interface requires a separate 12V DC power source For information relating to the TB3 Tipping Bucket Raingauge refer to the TB3 100 Instruction Manual HYDROLOGICAL SERVICES PTY LTD 48 50 SCRIVENER STREET WARWICK FARM 2170 SYDNEY AUSTRALIA A B N 37 000 732 954 PO Box 332 Liverpool BC 1871 PH 02 96012022 INT 612 9601 2022 FAX 02 9602 6971 INT 612 9602 6971 Email sales hydrologicalservices com Website www hydrologicalservices com OPERATION When the TB Heater is not Active the status LED flashes every 1 5 seconds When the ambient temperature sensor detects the temperature fall below the Active On temperature 4 C then the system becomes Active and the snow sensor is enabled The status LED flashes slightly faster at 2 flashes per second indicating the system is active When the proximity sensor detects snow for 5 seconds continuously the heater elements are turned on and the block temperature sensor is monitored The heaters are controlled so that the temperature inside the funnel reaches the Set Point temperature 10 C The lower heating block
39. cal compatibility Complies with EMC standard EN61326 1 1997 Am1 1998 Am2 2001 Generic Environment 80 60 40 20 0 20 40 60 80 Output resolution OX C DOT RE Units available Relative Humidity Range 0 100 RH Accuracy 3 RH within 0 90 RH 5 RH within 90 100 RH Output resolution 0 1 RH PTU Update Interval Update interval 3 3 600 s 60 min at one second steps General Self diagnostic separate supervision message unit status fields to validate measurement quality Start up automatic lt 10 seconds from Communication protocols Port H W Baud rate Operating temperature Storage temperature Operating humidity Dimensions Height Diameter Weight power on to the first valid output SDI 12 v1 3 ASCH automatic amp polled NMEA 0183 v3 0 with query option SDI 12 RS 232 RS 485 RS 422 1 200 2 400 115 200 52 60 C 60 140 F 60 70 C 76 158 F 0 100 RH 240 mm 9 4 in 120 mm 4 7 in 650 g 1 43 lbs Dimensions Dimensions in mm inches 240 9 4 TOP VIEW 40 1 6 32 1 3 Mounting kit optional HUMICAP RAINCAP THERMOCAP and WINDCAP are registered trademarks of Vaisala Specifications subject to change without prior notice Vaisala Oyj Vaisala Box 26 FIN 00421 Helsinki FINLAND Tel 358 9 894 91 Fax 358 9 8949 2485 Email i
40. ctrically insulated on a meteomast outrigger The air intake is at the bottom The air leaves the housing by way of a duct below the lid e Automatic differentiation between ice and water films on the mirror The type of deposit is distin guished in the calculation of the relative humidi ty e he humidity measurements are supplied either as relative humidity over water or as dew point frost point selection by software com mand e Control identifier indicates the operating state of the sensor e VIP37 is using exactly the same measurement system as the VTP6 which is recommended as a working reference by World Meteorological Or ganization WMO e The VIP37 is available with MeteoBus RS232 interface VTP37 Airport has additional abilitiy to detect Fog Fog detection is made by measuring oversatura ted water content and reported in 3 Steps 1 danger of fog 2 light fog visibility 150 300m 3 heavy fog visibility 150m Tel 41 44 934 40 40 CH 8620 Wetzikon Internet www meteolabor ch meteolabor ag Fax 41 44 934 40 99 E Mail info meteolabor ch Technical data Measuring instrument Control commands Temperature range 50 C to 50 C Set the internal clock Dew point range 65 C to 50 C Check the sensor status max Dew point depression at 20 C 40 K Switch from normal to continuous operation Sensor type copper constantan Check for special messages thermoelements Change address of the instrument
41. d or on which it is mounted The actual sensor in HFPO1 is a thermopile This thermopile measures the differential temperature across the ceramics plastic composite body of HFPO1 Working completely passive HFPO1 generates a small output voltage proportional to the local heat flux Using HFPO1 is easy For readout one only needs an accurate voltmeter that works in the millivolt range To calculate the heat flux the voltage must be divided by the sensitivity a constant that is supplied with each individual instrument HFPO1 can be used for in situ measurement of building envelope thermal resistance R value and thermal transmittance H value according to ISO 9869 ASTM C1046 and ASTM 1155 standards Traceability of calibration is to the guarded hot plate of National Physical Laboratory NPL of the UK according to ISO 8302 and ASTM C177 A typical measurement location is equipped with 2 sensors for good spatial averaging If necessary two sensors can be put in series creating a single output signal If measuring in soil in case a more accurate measurement is needed the model HFPO1SC should be considered See also models HFPO3 and the PU series HFPO1 SPECIFICATIONS Sensitivity nominal 50 uV Temperature range 30 to 70 C Sensor thermal resistance lt 6 25 10 3 Km W Range 2000 to 2000 W m Calibration traceability NPL ISO 8302 ASTM C177 Expected typical accuracy within 5 15 12hr totals in m
42. dSonic is designed to be mounted using a standard pole fitting and comes complete with all screw fittings a mating marine grade connector and comprehensive user manual The unit is supplied with a 2 year warranty as standard ENVIRONMENTAL Ingress Protection IP65 35 C to 70 C 40 C to 90 576 to 10076 MC EN 61000 6 2 2001 EN 61000 6 3 2001 Operating Temperature Storage Temperature Operating Humidity 5 years MATERIALS External Construction LURAN S KR 2861 1 ASA PC DIMENSIONS Size 142 x 160 mm Weight 0 45 kg WARRANTY 2 years OPTIONAL FACTORY CALIBRATION Traceable to national standards ACCESSORIES Pipe Mounting 44 45 mm 1 75 in diameter WindCom Display amp logging software Cables Display download WindCom free from www gill co uk The WindSonic is part of the Solent range of ultrasonic anemometers The range is in continuous development and therefore specifications may be subject to change without prior notice D300 WiindSonic hM Ultrasonic Wind Sensor Robust Aluminium Construction Optional Heating System Key Features Compact Wind Speed amp Direction Sensor E Hard Anodised Aluminium Alloy Construction 40 C Operation with optional heating E NMEA output Impact Resistance to UL2218 Class 1 E Maintenance Free The Gill WindSonic M utilises Gill s proven ultrasonic technology that has a proven performance over many years of operation in the popular WindSonic
43. del TB340 Calibration Unit but operates in a slightly different manner The Field Calibration Device nozzle is unscrewed from the cylinder which is in turn filled with water to the very top The nozzle is then screwed back on the cylinder and placed through the holding plate which sits on the catch of any Tipping Bucket Raingauge When the cap on the Field Calibration Device is closed the air is entrapped in the cylinder When the cap is removed a vacuum is created and the water is released down through the nozzle and into the Tipping Bucket Raingauge A preset volume 653ml water will discharge through the Tipping Bucket Raingauge This process is to be repeated a second time for an accurate calibration check The number of tips can be manually counted or stored on the data logger for calibration check evidence and then checked with Calibration Specifications to confirm that the results come within the acceptable range Figure FCD Distributed by Hoskin Scientific Limited 239 East 6th Ave Vancouver BC VST 1J7 Phone 604 872 7894 Fax 604 872 0281 Email salesv hoskin ca Website www hoskin ca Bulletin 9F Edition 3 RAINGAUGE HEATER KIT MODEL TBH LP Power Requirement AC DC Low Power Consumption Only Operating When Snow Is Detected Fully Automated Operation Thermostatically Controlled Heating Element SDI 12 Interface ISO 9001 QUALITY SYSTEM CERTIFIED HYDROLOGICAL SERVICES PTY LTD HYDROL
44. ding controls Ports amp harbours Data buoys SN Mobile weather monitoring vehicles E Marine vessels E Remote airports amp helipads E Road amp rail tunnels E Coastal weather monitoring stations 142mm 5 6 44 45 1 75 120 o gt 120 120 7 5mm 0 29 M5 threaded hole Mounting pipe dimensions showing the size and position of the 3 mounting holes 9 way mating connector supplied North alignment notch Specifications may be subject to change without prior notice Gill Instruments Ltd T 44 1590 613 500 Saltmarsh Park F 44 1590 613 555 67 Gosport Street anem gill co uk zl mngon ISO 9001 Hampshire www gill co uk Registered 5041 YEG UK INSTRUMENTS Copyright Gill Instruments 2012 1405 0029 Iss 3 Gill Instruments Ltd Reg No 3154453 Registered Office The George Business Centre Christchurch Road New Milton BH25 6QJ WindObserver II INSTRUMENTS Wind Speed amp Direction Sensor ALL WEATHER SENSING TECHNOLOGY ULTRASONIC TECHNOLOGY WINDOBSERVER II Bg m TRANSPORT SAFETY m MAINTENANCE FREE m WIND TURBINE CONTROL ROBUST CONSTRUCTION m SHIPDYNAMICPOSITIONINGSYSTEMS m LLOYD S TYPE APPROVAL m AIRCRAFT LANDING SYSTEMS LOW TEMPERATURE DE ICING METEOROLOGICAL SYSTEMS USERSELECTABLEOUTPUTFORMAT m STRUCTURAL SAFETY www gill co uk WINDOBSERVER II ULTRASONIC WIND SENSOR The Wind
45. e FAA amp CAA for the observation and reporting of surface wind as part of a suitable AWOS Automatic Weather Observing System Wind Speed 070 mls 8 156mph Starting threshold 0 01 m s 2 012 ms 0 01 mis Offset 0 01 m s Direction i Gum Measurement Power Requirement Anemometer only 9 30 VDC 60mA max 50mA average FAA amp CAA accepted for airport applications Heating power 7A 24VAC or DC 1W cm 0 359 wind direction range no dead band INSTRUMENTS Digital Output Mechanical External construction Stainless steel 316 Refer to diagram overleaf Weight 1 7kg with 2m cable 1 3kg with connector Environmental Approvals Standards Traceable to NAMAS standards Site Calibration None required Integrity check unit Zero wind supplied as optional extra VindObserver 1 Ultrasonic Anemometer Typical Applications Aviation Weather Observing Systems E Helicopter Landing Pads E Aircraft Landing Systems Transport Safety E Remote Meteorological Systems 381mm 15 S 213mm 8 4 gt W Top view 56 8mm 96 8mm 2 23 dia Note Optional base mounts and cable exit options are available Specifications may be subject to change without prior notice INSTRUMENTS Gill Instruments Ltd T 44 1590 613 500 Saltmarsh Park F 44 1590 613 555 6 Gosport Street E anem gill co uk Lymington ISO 9001 Hampshire www gill co uk
46. e jos a E Bite per second 19200 ient Spend wt E sf a E Connected 0 42 29 ptu r Par N 3 ura eem Sharia ASCH gta f lumen pease ard pes 5 Manas poling oni 405 tre dry mil Regures eth The WXT Configuration Tool ua Cancel includes an easy to use Windows m aso software that enables the further a SEED adjustment of WTX510 settings In f T addition the software can be used as a WXT510 user interface display in a PC environment Heating to ensure constant data availability In order to have measurement data constantly available and ensure correct measurement also during snowfall the WXT510 offers heating for the wind and rain sensors The heating circuit is separate from the operational power which makes it possible to use separate supplies The nominal input level for heating voltage is 12 V or 24 V with automatic switch over either DC AC or rectified AC The WXT510 has an automatic control circuit that switches the heating on only at low temperatures Low power consumption and wide input voltage range The Vaisala Weather Transmitter WXT510 is an excellent choice for applications where power consumption is a critical factor During the idle mode the device typically consumes less than 0 1 mA The WXT510 has a wide input voltage range Any 5 30 VDC power supply can be used as long as i
47. e liquid water content is rising B and ten days after that the snow water equivalent is decreasing C At that point the snowmelt run off starts That shows that the SPA system can improve the pre diction of snowmelt run off Snow waler equivalent SWE mm 8 Liquid water 9 Snow height em T gm 01 01 2007 0 02 2007 01 09 2007 01 04 2007 01 06 2007 01 06 2007 07 2007 Fig 5 Data of the SPA System in the winter season 2006 2007 Components of the system Component Description 1 4 sensors mountable 3 10 m sensor length Multiplexer controls the switching between multiple sensors and connects the snow depth sensor SPA sensor Suspension of the SPA sensor Measurement and control unit Snow depth sensor Optional components Copyright Copyright 2009 Sommer V003 All rights reserved Content may be changed without notice Pictures drawings and other graphic images are for illustration only and do not represent product configuration Exclusion Subject to deliverability technical changes and errors excepted Produktinfo SPA V004 DEU ENG indd 4 e 21 06 2010 16 21 10 Hoskin Scientific Limited has been supplying testing and monitoring instruments since 1946 Although our range is broad we focus on three major markets including Geotechnical amp Materials Testing Environmental Monitoring Test amp Measurement Instrumentation Hoskin Scientific operates out of three office
48. er consumption Compact and light weight Fast and simple to install Low maintenance Configuration Tool for PC Proven Vaisala technology Accurate measurement begins with the sensors Vaisala has decades of experience in designing and manufacturing weather sensors with field proven reliability and accuracy WXT510 Accurate and Stable Measurement Wind measurement Both wind speed and direction are measured using the advanced Vaisala WINDCAP Sensor The sensor uses ultrasound to determine horizontal wind speed and direction The array of three equally spaced ultrasonic transducers on a horizontal plane is an ideal Vaisala proprietary design The design ensures accurate wind measurement from all wind directions without blind angles or corrupted readings The wind sensor has no moving parts which makes it maintenance free The measurement range for wind speed is from 0 to 60 m s and for wind direction from 0 to 360 Precipitation measurement The precipitation measurement is based on the Vaisala RAINCAP Sensor which detects the impact of individual rain drops The signals exerting from the impacts are proportional to the volume ofthe drops Hence the signal from each drop can be converted directly to the accumulated rainfall Compared to traditional precipitation gauges the Vaisala RAINCAP Sensor gives more detailed information about precipitation The WXT510 measures accumulated rainfall rain
49. est The data obtained are handled and stored by a fast digital signal processor Primary data are the size and velocity of each single hydrometeor from which the size spectrum the amount of rainfall the equiva lent radar reflectivity the visibility the precipitation kinetic energy and the precipitation type are derived The results can be trans mitted to a datalogger or a PC with a serial interface The advantages of Parsivel9 Remote access facility for data gathering and configuration One multipurpose instrument fits for 5 single units Simultaneous measurement of all kind of precipitation at all windspeed from calm to hurrican Solid state instrument as alternative for raingauges with mechanical tipping bucket principle Accurate and overall recording and analyse of precipitation type quantity and distribution Fully operable precipitation sensor in arctic E desert and tropical climate zones Low initial and operating costs as unatten ded stand alone system or as part of an unmanned weather station The principle Parsivel uses a laser based optical sensor to measure precipita tion The transmitter unit of the sensor generates a flat horizontal beam of light which the receiver unit converts into an electrical signal This signal changes whenever a hydrometeor falls through the beam anywhere within the measurement area 54 cm Parsivel features unique performance Patented extinction measurement proced
50. gible maintenance need The Vaisala Weather Transmitter WXT510 is calibrated at the factory and requires very little maintenance The only maintenance actions are cleaning the transmitter when necessary and replacing the PTU module Both rain and wind measurements are practically calibration free The PTU unit has a recommended calibration interval of two years WXT510 Technical Data Operating Principle Vaisala WINDCAP Sensor separation length L o Time of flight t WwW Parallel component of wind velocity Time of flight t 8 6 ac l For static speed of sound ve Transmit Transmit Rece lt z Time of flight for a sonic impulse from the transmit transducer to the receive transducer is determined for both directions Simple algebra allows solving for the parallel component of wind velocity independently of the static speed of sound V Combine to remove V V Solve for V w ol gt The equilateral triangle configuration of the three transducers provides three possible sets of basis vectors The combinations yield bi directional measurements on the paths labeled A B and C These measurements are used to determine the wind velocity components parallel to each of the three paths Vaisala RAINCAP9 Sensor The precipitation sensor detects the impact of individual raindrops The v
51. ice The George Business Centre Christchurch Road New Milton BH25 6QJ VWindObserver Ultrasonic Anemometer Key Features 0 75 5 wind speed range 1 within X25 of datum IP66 rated stainless steel housing Connector or cable exit options Optional customer base mounts The WindObserver 75 has been developed for measuring higher wind speeds in extreme weather environments featuring 150 Watts of electrical heating power in the anemometer head This anemometer has been designed to remain ice free in most freezing weather conditions The sensor provides data via RS422 RS485 bidirectional link which allows several units to be networked together and data logged on demand With innovative transducer design this anemometer boasts a very high wind speed range of 0 75 m s 0 168mph and gives an output status indicating the validity of data so that you can be confident that the instrument is providing accurate information Constructed from Stainless steel this anemometer meets the stringent performance criteria specified by wind turbine manufacturers Heating power 7 24VAC or DC 1W cmv 0 359 wind direction range no dead band Wind soeed accuracy for turbine control Calibration traceable to NAMAS standards INSTRUMENTS airports marine oil and gas production and meteorological organisations around the world Wind Speed 0 75 mjs 0 168 Starting threshold 0 01 m s 2 12 m s 196 for turbine
52. ife of the unit Suitable for any location Conceived for a precipitation intensity range of 0 1 to 30 mm min the OTT Pluvio reliably measures the drizzle of the temperate zones as well as heavy tropical rains and arctic snow showers Bucket orifice without a funnel heavy and solid precipita tion are also recorded with precise timing E Continuous precipitation measurement and the highest availability of data no evaporation losses from heated fun nels or buckets Virtually maintenance free The OTT Pluvic is supplied with lifetime calibration Calibration work on location is therefore no longer necessary E Maintenance work is limited to emptying the collecting bucket occasional visual checks and adding anti freeze as necessary E Onerous cleaning work due to blocked funnels or filters are a thing of the past Alarm and error messages are available for remote data transfer via the output interfaces thus an overflow for example can automatically be detected by the status Data output is blocked during maintenance work and accu racy tests Non sensitive and robust The big plus of the OTT Pluvio is its robust nature which also resists adverse environmental conditions The calculation electronics are hermetically protected from environmental influences and achieve the highest EMC Formed parts are made by machine they are particularly strong and of high quality materials
53. isture Protection Humidity Precipitation EMC Site Calibration Anemometer only Heating Optional The WindObserver ll is part of the Solent range of ultrasonic anemometers The range is in continuous development and therefore specifications may be subject to change without prior notice D601 VWindObserver 1 Ultrasonic Anemometer Key Features 0 70 5 wind speed range Calibration traceable to NAMAS standards IP66 rated stainless steel housing Connector or cable exit options Optional customer base mounts The WindObserver 70 is a solid state heated ultrasonic anemometer designed for use within the aviation industry and for more extreme weather conditions The sensor has been accepted for service by both the FAA Federal Aviation Administration USA and the CAA Civil Aviation Authority UK for the observation and reporting of surface wind This WindObserver meets the requirements of Annex 3 to the Convention on International Civil Aviation Organization ICAO when supplied as part of a suitable AWOS With 150 Watts of electrical heating in the anemometer head producing 1 Watt cm and tested in accordance with MILSTD810F the unit is particularly suited to operate as part of Aviation Automatic Weather Observing Systems which are often exposed to extreme weather conditions Manufactured from stainless steel with no moving parts the sensor requires no on site calibration and minimal maintenance Accepted by th
54. ity of rainfall made from brass with a non hydroscopic outer case Bucket two types of buckets synthetic ceramic coated brass bucket balanced to 0 05 gms and injection moulded non hydroscopic plastic ABS balanced 0 05 gms Base Diecast aluminium Level bulls eye level adhered to aluminium base Mounting holes three 10 mm diameter mounting holes with 117 mm p c d cast in feet attached to outside diameter of base Drain fittings to attach 12 mm inside diameter tubing to catch rainfall after passing through buckets Pivots ground sapphire pivots with hard stainless steel shaft Insect covers stainless steel mesh on all openings to prevent insects and ants entering gauge Outer enclosure keyed to enable the release of the outer enclosure without the need for the removal of the three securing screws Height 342mm Weight 3 kg HYDROLOGICAL SERVICES PTY LTD 48 50 SCRIVENER STREET WARWICK FARM 2170 SYDNEY AUSTRALIA A B N 37 000 732 954 PO Box 332 Liverpool BC 1871 PH 02 96012022 INT 612 9601 2022 FAX 02 9602 6971 INT 612 9602 6971 Email sales hydrologicalservices com Website www hydrologicalservices com Aq paynqiysig EXPORT 7 07 Bulletin 9G Edition 1 TIPPING BUCKET RAINGAUGE MODEL TB6 World standard 200mm catch Bucket size 0 01 inch 0 2mm 0 5mm Long term stable calibration Leaf filter resists blocking Optional internal Data Logger with no external
55. ive on site calibration or maintenance and with a corrosion free exterior WindSonic is a true fit and forget unit CUSTOMER SELECTABLE Output 1 2 or 4 outputs per second Parameters Wind Speed amp Direction or U and V vectors Units of Measure m s knots mph kph ft min 0 60 m s 116 knots 2 Resolution 0 01 m s 0 02 knots 0 to 359 no dead band 3 Resolution 1 ANEMOMETER STATUS Message supplied as part of standard output 9 30Vdc 14 5mA typical Start up time second RS232 RS232 RS422 RS485 NMEA RS232 RS422 RS485 NMEA 0 5V or 4 20mA SDI 12 Range Accuracy Range Accuracy Anemometer NMEA 0183 Version 3 GILL INSTRUMENTS LTD Saltmarsh Park 67 Gosport Street Lymington Hampshire 5041 9EG UK Tel 44 0 1590 613500 Fax 44 0 1590 613555 E mail anem gill co uk INSTRUMENTS Website www gill co uk Gill Instruments 2005 The flexible design enables you to easily configure WindSonic to deliver the information you require By using the software provided it is possible to select the output rate and choose the units of measurement that suit your application Ensuring accuracy and reliability WindSonic automatically transmits an anemometer status code with each output to indicate its operating status Available in four options providing a number of different digital and analogue outputs Maintenance free quick and easy to install Win
56. mplifier EQ08 S EQ08 SE Secondary Standard Pyranometer Very high quality sensor for solar global radiation ISO9060 Secondary Standard Thermoelectric detector temperature compensated EQO8 SE has internal signal amplifier EQ16 EQ16 E Pyrano Albedometer For ratio of upward to downward solar radiation Comprises two matched response pyranometers on common body EQ16 E has signal amplifier UVR1 A amp UVR1 B Ultraviolet Pyranometers UVR1 A UVA 315 400nm and UVR1 B UVB 280 315nm Low noise signal amplifier Active thermal stabilisation Outputs for signal and temperature Low power standby mode Marine grade aluminium hard anodised SD4 Sunshine Duration Sensor For accurate measurement of direct sunlight duration Microcontroller evaluates contrast of four omni directional sensors No alignment required Marine grade aluminium hard anodised CN3 Heat Flux Plate For conductive heat measurement eg in soil Waterproof Stainless steel with phenolic core Complete with calibration certificate SP02 amp SP02 L Sunphotometer For optical depth column ozone and water vapour measurement Four narrow bandpass channels axially aligned Temperature output Marine grade aluminium hard anodised Sensitivity 7uV W m 2 DN5 1 0mV AW m 2 DN5 E spectral range 0 2 to 5um Response time lt 10s to 95 DN5 E supply 5 5 14 5VDC Sensitivity 250 V W m 2 Spectral range 0 3 to 0 SW to LW variation 59
57. ndustrialsales vaisala com Please look for other locations at www vaisala com s VAISALA WWW Vaisala com Ref B210417en 2004 10 5 VN C Hydrology Meteorology Geology MESS S STEMTECHNIK Snow depth Snow depth sensor USH 8 The robust design of the USH 8 makes it ideal for the reliable measurement of snow depth in extreme conditions It is used by the central weather services all over Europe as well as by the avalanche warning services in high mountain regions The ultrasonic membrane incorporated into the USH 8 stands out due to its long service life The additional air temperature detection feature permits precise measurement of snow depth over a wide temperature range The powerful ultrasonic impulses emitted by this snow depth sensor deliver reliable readings even when there is a difficult reflection ratio as is the case with powdery or fresh snow The sensor is characterized by its high level of operating reliability low energy consumption and ease of use in the field The operating parameters and adjustment settings of the USH 8 are controled simply and easily via a standard terminal program installed on a PC or laptop Features and characteristics e Hard wearing highly robust measuring head Precise measurement thanks to integrated temperature compensation e Reliable readings even with the difficult reflection ratio caused by powdery or fresh snow Analog and digital
58. ohibited All specifications technical included are subject to change without notice RAD 01 amp RAD 02 Unaspirated Radiation Shields A cross sectional cutaway showing the external and internal louvres of a RAD 01 shield Accuracy Testing of these Shields has been carried out by Campbell Scientific Ltd UK and the results are published with their kind permission Typical solar heating errors In conditions of high solar radiation and wind speeds less than 1 m s the readings were compared with an aspirated shield RAD 01 Small version 0 75 RAD 02 Large version 0 5 These errors are less than half those recorded from other similar shields on the market and the performance is comparable to the Stevenson screens although the time constant of our new shields is shorter Detailed report on the trial is available from Metspec ZWMETSPEC SPECIALIST METEOROLOGICAL EQUIPMENT specifications Double louvred high impact thermoplastic e White external layer with U V stabiliser for long term weather resistance e Extra black internal layer e Aluminium arm with durable white powder coating e A4 grade 316 stainless steel V bolt and securing nuts to fit a pole of between 25 51 mm diameter e Black acetal plastic locating clamp Probe compatibility RAD O1 Houses probes from 5 12 mm in diameter with up to 120 mm of the probe inside the shield RAD 02 Houses larger
59. oltage signals resulting from the impacts are proportional to the volume of the drops V and therefore the signal of each drop can be directly converted to accumulated precipitation P WEATHER MULTI SENSOR Wind Wind speed Range 0 60 m s Response time 0 255 Available variables average maximum and minimum Accuracy 0 3 m s or 296 whichever is greater Output resolution 0 1 m s km h mph knots Units available m s km h mph knots Wind direction Azimuth 0 360 Response time 250 ms Available variables Average maximum and minimum Accuracy 2 Output resolution 1 Measurement frame Averaging time 1 600 s 10 min at one second steps on the basis of 0 25 second samples Update interval 1 3 600 s 60 min at one second steps Liquid Precipitation Rainfall cumulative accumulation after latest automatic or manual reset Collecting area 60cm Output resolution 0 01 mm 0 001 in Accuracy 5 Units available mm in Rain duration counting each ten second increment whenever droplet detected Ouput resolution 10s Rain intensity one minute running average in ten second steps Range 0 200 mm h broader range with reduced accuracy Ouput resolution 0 1 mm h 0 01 in h Units available mm h in h Hail cumulative amount of hits against collecting surface Output resolution Units avaiable 0 1 hits cm 1 hits in hits cm hits in hits Hail duration counting each ten second increment whenever
60. ome Figure 2 SGG snow scale set up Figure 3 SGG measuring cell construction Set up example In Switzerland Davos 2 660 m the SGG snow Aim is that the snow scale takes over the characte scale has been set up in the ground So the SGG ristics of the ground and therfore the measuring and the surrounding ground are on the same level values should have a higher informative value Figure 4 Preparation measuring site Davos Figure 5 SGG snow scale set up Davos System applications e Water resource management e Flood risk management e Monitoring of precipitation e Automatic snow load monitoring PRODUCT INFORMATION SGG soe MESS SYSTEMTECHNIK Technical Specifications Range of measurement Resolution Accuracy 22 on Dimension mm Packaging mm 7 x L 800 B 1200 30 bars L 2800 Protection SGG 200 4 20 mA 0 200 mm SWE SGG 500 4 20 mA 0 500 mm SWE SGG 1500 4 20 mA 4 0 1500 mm SWE Order information oGG 200 range O 200 mm SWE SGG 500 range 0 500 mm SWE SGG 1500 range 0 1500 mm SWE Connecting box with high voltage protection All declarations of weight and accuracy refering to standardised weights Copyright Copyright 2010 Sommer V001 All rights reserved Content may be changed without notice Pictures drawings and other graphic images are for illustration only and do not represent product configuration Exclusion Subject to deliverability technical
61. optic observer drizzle rain hail snow 0 001 1200 mm h 0 00004 47 2 inch h 5 96 liquid x20 96 solid WMO 4680 4677 SYNOP 4678 METAR and NWS tables 100 5000 m 300 16 000 feet 21096 9 9 99 dBz 2096 15 seconds to 60 minutes 10 36 V DC reverse battery protection software controlled heating device 6 W electronics with dew heater at 24 V DC 50 W max 2 A heating device at 24 V DC configurable HS 485 1200 115 200 Baud half duplex SDI 12 open collector digital output for precipitation status solid liquid and pulse 0 1 mm 0 004 inch 0 01 mm 0 0004 inch EN 61000 4 2 4 5 6 4 kV integrated for power and interfaces lines EN 61000 4 3 CE conform Galvanized aluminium housing Max 5 kg 40 70 C 40 158 F 0 100 96 rH IP 65 salt fog proof 560 x 370 x 120 mm 22 05 x 14 57 x 4 72 inch On a tube 50 60 mm 2 2 36 inch Accuracy applicable from firmware version 1 10 1 calibration ex factory implied upgrade of previous versions possible OTT MESSTECHNIK GimbH amp Co KG Ludwigstrasse 16 87437 Kempten Tel 49 0 831 56 17 0 Fax 49 0 831 56 17 209 info ott com www ott com We reserve the right to make technical changes 70 200 005 As at 06 06 2007 Ventilated thermohygrometer VTP37 e meets the highest demands as to reliability and accuracy e Ventilated heated air thermometer e Automaticall
62. ost common soils within 5 5 on walls OPTI ONS Additional cable length x metres add to 5m AC100 amplifier LI 18 hand held readout mibpDLETOD SOLAR 4e Leon AVENUE BRUNSWICK VICTORIA 5056 AUSTRALIA E DN5 amp DN5 E First Class Pyrheliometer For solar direct radiation ISO9060 First Class Marine grade aluminium hard anodised Thermoelectric sensor temperature compensated Optional Filterwheel available CN1 R Net Pyrradiometer For global amp reflected total radiation balance Semi rigid polythene domes permanently inflated hermetically sealed construction calibration certificate for shortwave amp longwave SK01 D2 Pyranometer Moderate quality sensor for solar global radiation Silicon photodiode detector In built amplifier Circular level Glass dome Hard anodised IP67 SK01 DP2 PAR Sensor Version of SK01 D2 for solar global Photosynthetically Active Radiation _ SK08 amp 5 08 First Class Pyranometer Good quality sensor for solar global radiation 1509060 First Class Hard anodised aluminium Thermoelectric detector temperature compensated Complete with calibration cert SKO08 E has internal signal amplifier _ EQO08 amp EQ08 E First Class Pyranometer High quality sensor for solar global radiation 1509060 First Class Marine grade aluminium hard anodised Thermoelectric detector temperature compensated Complete with mount kit and calibration cert EQ08 E has internal signal a
63. parity 2400 115200 selectable 0 4 00Hz ANALOGUE INPUTS VIA OPTIONAL SIU Quantity Range and Resolution Communication 6 differential inputs 100 2 Input range resolution 5 14 bits Accuracy 0 176 of FSR ANALOGUE OUTPUTS VIA SUPPLIED PCIA Sampling Rate Quantity 7 U V W SoS PRT 2 analogue inputs Sampling 10 20 30 60m s Update rate 0 4 to 100Hz Output range res 2 5V 4 bits lt 0 25 of FSR Accuracy The resolution of the analogue outputs has been greatly improved to l4bits whilst the high accurancy and measurement resolution of the solent research has been maintained Optional extras such as the inclinometer are available as well as a sensor input unit to allow upto 6 analogue sensors plus a PRTIOO input Supplied Accesssories RCOM operating system with a graphical interface data presentation and storage flux calculations power supply PCIA Transit Case Optional Accessories Analogue and PRT Inputs via Signal Interface Unit SIU Inclinometer PRT INPUT REQUIRES OPTIONAL SIU 00 NOT INCLUDED lt 0 01 from 0 C to 50 lt 0 15 C from 40 C to 60 C 120 0 01 0 15 0 3 from 10 to 10 of inclination 9 30VDC 4w eg 150mA 24VDC or 300mA I2VDC 40 C to 60 Moisture Ingress IP65 300mm hr BS EN 50081 1 1992 Emissions BS EN 50082 1 1992 Immunity GENERAL Suitable for exposure to a ma
64. probes 14 25 mm Dimensions and weight RAD 01 Overall 165 mm diameter x 172 mm height Shield only 308 mm including bracket Weight 1 05 kg RAD 02 Overall 165 diameter x 274 mm height Shield only 405 mm including bracket Weight 1 34 kg RAD 01 amp RAD 02 Unaspirated Radiation Shields Introducing our new range of Radiation Shields designed to house temperature and humidity probes and protect them from the heating effects of solar radiation and direct exposure to rain and snow Benefits over existing models on the market include e Improved accuracy proven in recent comparison trials Unique double louvred construction e Highly durable non yellowing UV stable plastic Accommodates complete range of sensor sizes A SPECIALIST METEOROLOGICAL EQUIPMENT Radiation Shields Metspec Radiation Shields have an innovative design to reduce overheating when solar radiation is high and windspeed is low This is also effective in the winter when the sun s angle is low or there is reflection off Snow The design of the shield has a white outer reflective surface combined with an inner barrier of non reflective black louvres This prevents sunlight and reflected radiation reaching the sensor whilst still allowing air to flow across the sensor This design is based on the Metspec Stevenson Screen which is now established as an industry standard and sold to National Meteorological Services worldwide
65. pshire 5041 9EG UK Tel 44 0 1590 613500 Fax 44 0 1590 613555 E mail anem gill co uk INSTRUMENTS Website www gill co uk Gill Instruments 2005 with large eddies at high mast levels Having identical output formats to the R3 the R3 50 is particularly suited to applications where a complete wind profile is required with an R3 or HS positioned near the ground and the R3 50 positioned at a higher level Gill research grade units are individually custom calibrated and supplied with a certificate of calibration All of our test equipment has been designed specifically to test and calibrate our range or ultrasonic sensors and is traceable to national standards PRT INPUT requires SIU PRT 100 not supplied 0 01 C lt 0 01 C 0 to 50 C lt 0 15 C 40 C to 60 C 9 30V dc lt 150 24VDC or 300mA I2VDC Operating temperature 40 C to 60 C IP65 Operation maintained to 300mm hr BS EN 50081 1 1992 Emissions BS EN 50082 1 1997 Immunity GENERAL Suitable for exposure to a marine environment MATERIALS External construction Aluminium Carbon Fibre DIMENSIONS Size 750mm x 240mm Weight Input resolution Input accuracy Anemometer Ingress protection Precipitation EMC Accuracy specification applies for wind speeds 32 m s and for wind incidence up to 20 from the horizontal The R3 50 is part of the Solent range of ultrasonic anemometers The range
66. rine environment Accuracy specification applies for wind speeds 32m s and for Input resolution Input accuracy Range Resolution Null Repeatability Anemometer Operating Temp Precipitation EMC wind incidence lt 150 in the horizontal plane and up to 50 from the horizontal GILL INSTRUMENTS LTD Saltmarsh Park 67 Gosport Street Lymington Hampshire 5041 9EG UK Tel 44 0 1590 613500 Fax 44 0 1590 613555 E mail anem gill co uk INSTRUMENTS Website www gill co uk Gill Instruments 2005 The R3 100 is part of the Solent range of ultrasonic anemometers The range is in continuous development and therefore specifications may be subject to change without prior notice D900 HOSKIN SCIENTIFIC LIMI TED Solar Sensors LPO2 pyranometer ISO 9060 Second Class Solar radiation sensor compliant with ISO and WMO standards LPO2 TR Solar radiation sensor compliant with ISO and WMO standards with integrated transmitter LPO2 119 Portable solar radiation sensor with read out unit datalogger SRO3 pyranometer ISO 9060 Second Class Fast response pyranometer for PV application compliant with ISO and WMO standards 1 sec rapid response sensor SR11 pyranometer ISO 9060 First Class First class pyranometer solar radiation sensor SR11 TR First class solar radiation sensor with integrated transmitter SR12 pyranometer ISO 906
67. s Centre Christchurch Road New Milton BH25 6QJ WindObserver OPTIONS 1 Connector Analogue 2 Cable Gland 2m Cable 3 Cable Gland 10m Cable 4 Cable Gland 15m Cable Product Code 1 No Base Mount 2 Base Mount Short 3 Base Mount Long 4 Pipe Mount 65 65 m s 1 No Heating 70 70 m s 2 Standard Heating 75 75m s 3 Enhanced Heating Product options may be model specific Consult the Gill sales team for availability Connection Options Drawings below shown without base mounts WindObserver fitted with integral connector WindObserver fitted with cable gland and flying lead Cable length options 2m amp 10m long tails Base amp Pipe Mount Options Base Mount Short Base Mount Long Pipe Mount M5 CLEARANCE HOLES M5 CLEARANCE HOLES 5 CLEARANCE HOLES A 57 00 100 00 100 00 65 00 1 INCH NPT THREADED HOLE 65 00 30 00 INSTRUMENTS Gill Instruments Ltd www gill co uk Saltmarsh Park 67 Gosport Street Lymington Hampshire UK 5041 YEG Copyright Gill Instruments 2012 T 44 0 1590 613 500 44 1590 613 555 E anem gill co uk 1390 0035 Iss 1 Gill Instruments Ltd Reg No 3154453 Registered Office The George Business Centre Christchurch Road New Milton BH25 6QJ Gill WindMas
68. s within Canada 3735 Myrtle Street Burnaby BC V5C 4E7 Phone 604 872 7894 Fax 604 872 0281 email salesv Hoskin ca 4210 Morris Drive Burlington ON L7L 5L6 Phone 905 333 5510 Fax 905 333 4976 email salesbeHoskin ca 300 Rue Stinson Montreal PO HAN 2 7 Phone 514 735 5267 Fax 514 735 3454 email salesm Hoskin ca
69. se with MLI FL logger Installed The ML fits inside the model TB6 Raingauge Its compact design makes it ideal for incorporation into any piece of equipment where intelligent data acquisition and logging are required Accessories Description A TB3 Pole Mounting Bracket B Field Calibration Device C Data Logger D RS232 to USB Converter Part No TB334 TB320 FCD MLI or MLI FL DL307 HYDROLOGICAL SERVICES PTY LTD 48 50 SCRIVENER STREET WARWICK FARM 2170 SYDNEY AUSTRALIA A B N 37 000 732 954 PO Box 332 Liverpool BC 1871 PH 02 96012022 INT 612 9601 2022 FAX 02 9602 6971 INT 612 9602 6971 Email sales hydrologicalservices com Website www hydrologicalservices com Specifications Receiver Bucket capacity Sensitivity Measuring range Calibration accuracy Humidity Temperature Contact system Capacity Resistance M T B F Bucket Base Level Mounting holes Drain fittings Bucket pivot system Insect covers Outer enclosure Height Packed Dimensions 200 mm 0 3 diameter injection moulded ABB 0 5 mm of rainfall one tip 0 2 mm 0 5 mm or 0 01 inch of rainfall 2 for intensities from 0 to 100 mm hr 3 for intensities from 100 to 300 mm hr Long term stable calibration 0 to 100 96 20 to 70 dual reed switches potted in soft silicon rubber with varistor protection 0 5 amp 12 Volts D C Initial contact resist
70. t meets all applicable safety regulations Easy settings The WXT510 is supplied pre configured from the factory If the factory settings are needed to be altered the user friendly configuration tool Windows based WXT Cofiguration Tool is available Averaging times output mode settings etc are easy to change if required The WXT Configuration Tool can also be used as a display for the WXT510 transmitter Flexible output options The Vaisala Weather Transmitter WXT510 communicates with the host via a bi directional serial line It offers a choice of four configurable serial interfaces SDI 12 RS 232 RS 485 and RS 422 The screw terminals inside the bottom part ofthe transmitter are easy to access For extra convenience an industry standard 8 pin M12 connector at the bottom ofthe transmitter is available as an option Easy installation The Vaisala Weather Transmitter WXT510 has been designed considering easy installation After assembling the calibratd PTU module the WXT510 only needs to be mounted aligned and connected to the data logger and the power source The WXT510 can be mounted either on top of a pole mast or on to a cross arm In both cases the mounting procedure is very simple For facilitating the installation to the pole mast and eliminating the risk of misalignment during the use an optional mounting kit is available With the mounting kit the north alignment needs to be performed only once Negli
71. t the radar data In combination with water level sensors and drainage model ling a high performance regional high water early warning system can be erected Technical data Optical sensor laser diode Laser class Beam size W x D Measuring area Range of measurement Particle size Particle velocity Particle classification Precipitation types Distinction of precipitation types Precipitation intensity Rain rate Reports Visibility in precipitation MOR Radar reflectivity Z Measurement interval Power supply Power consumption Interfaces configurable Overvoltage protection EMC EMI Material Weight Temperature range Protection Dimension W x Hx D Mounting 1 2 ASDO configuration software included in delivery OTT Your partner for Water level measurement in ground and surface water Discharge measurement Precipitation measurement Water quality measurement Data management and communication HydroService consulting training installation and maintenance 4 Wave length 650 nm 1 mW output power 1 21 CFR 1040 10 and 1040 1 1 1M IEC EN 60825 1 A2 2001 180 x 30 mm 7 09 x 1 18 inch 54 cm 8 37 inch statistical correction of border events 0 2 25 mm 0 008 0 98 inch 0 2 20 m s 7 87 787 4 inch s 32 size classes and 32 velocity classes 8 drizzle drizzle rain rain mixed rain snow snow snow grains sleet hail 97 96 compared with syn
72. ter INSTRUMENTS 3 Axis Ultrasonic Anemometer ALL WEATHER SENSING TECHNOLOGY WINDMASTER METEOROLOGICAL SYSTEMS m MAINTENANCE FREE TRANSPORT SAFETY LIGHTWEIGHT CONSTRUCTION STRUCTURAL SAFETY U V W SOS amp SONIC TEMP OUTPUT WIND PROFILING 20Hz OR OPTIONAL 32Hz DATA RATE MARINE RESEARCH OPTIONAL ANALOGUE INPUTS OR WIND TURBINE SITE SURVEY OUTPUTS www gill co uk WINDMASTER ULTRASONIC WIND SENSORS The new WindMaster three axis anemometer is a robust instrument based on time of flight measurements and is essential in the understanding of turbulent flows surface energy balance and scalar fluxes All these areas of research rely on accurate and precise measurements of mean and variance of time averaged wind velocities and Speed of Sound SOS derived temperature This is particularly true in determining scalar fluxes using the eddy covariance technique Gill employs the optimum mechanical configuration and electronic processing to minimise flow distortion and transducer shadow effects Gill undertakes an individual calibration with a Gill wind tunnel test on each unit to provide the optimum performance The WindMaster is available with a 20Hz data output rate with an option to increase this to 32Hz The instrument is constructed in the familiar Aluminium carbon fibre construction The WindMaster is fitted with field proven standard Gill transducers with the ability to measure a top wind speed of 45 m s OU
73. tions easier than ever It combines decades of experience and the latest innovations on weather instruments into a compact and durable package sensor technology advanced design and decades of experience in environmental measurements resulting a high quality instrument that reliably measures all essential weather parameters This makes the WXT510 an optimal building block for dense weather measurement networks and other weather stations used in multiple applications The WXT510 is truly flexible and it can be configured to meet most user requirements The transmitter is easy to install with its one bolt mounting method Easy and fast installation as well as low power consumption make it ideal for use in weather stations or applications where light weight and compactness are an advantage As the WXT510 has no moving parts it is durable and has long maintenance intervals The materials used are also highly resistent against UV radiation and corrosion Features Benefits Six most essential weather parameters combined in one instrument Accurate and stable measurement Proven Vaisala sensor technology Vaisala WINDCAP Ultrasonic Wind Sensor for wind speed and direction Vaisala RAINCAP Sensor for advanced precipitation measurement Vaisala BAROCAP Sensor for barometric pressure Vaisala THERMOCAP Sensor for temperature Vaisala HUMICAP Sensor for relative humidity No moving parts Low pow
74. ure Operates unattended and fast using maintenance free laser technology Reliable in all environmental and weather conditions lightning protection and self regulated heating Low power and heating operation by software commands Reliable recognition of all precipitation types including mixed 5 systems in one unit Up to five systems can be accommodated in a single unit using appropriate and efficient software to suit customer requirements Precipitation Measurements designed for determining the distribution and amount of precipitation can be carried out maintenance free with Parsivel regardless of the intensity duration or type of precipitation Additionally its composition i e the distribution of particles with respect to their type is obtained directly from the measured sizes and velocities of each single particle and is recorded stati Stically Present Weather Sensor PWS The present weather and the types of precipitation rain drizzle snow hail and sleet are classified in accordance with a weather code established by the WMO Unmanned weather stations require automatic detection reliably and unambiguously Parsivel can ascertain the type quantity and composition of the hydro meteor and the atmospheric visibility in every kind of weather Monitoring of disposal sites The functions of precipitation kinetic energy distribution and pre cipitation measurement are utilised by Parsivel to record
75. uvio 200 OTT Pluvio 400 Pedestal 0 Weight bucket empty Material for base plate bucket pipe housing Environmental conditions Temperature in operation Temperature storage Relative humidity Protection Housing Load cell EMC Measuring range Intensity RT measuring interval 1 minute Amount RT INRT amount NRT amount total NRT Bucket content RT and NRT Accuracy at 25 45 C Amount and bucket content absolute max 60 min collection time Intensity Resolution Times Intensity output interval Output delay Query interval Pluvio operating software supplied with unit liquid solid and mixed 200 cm and 400 cm 1500 mm and 750 mm sealed load cell configuration service mode and firmware update SDI 12 or RS 485 impulse 0 1 mm and status 120 impulses min configurable 5 Hz or 2 Hz intensity RT amount RT NRT amount NRT amount total NRT bucket content RT and temperature of load cell OTT Pluvio status heating status if present 9 6 28 VDC lt 180 mW max 15 mA at 12 V typically 12 mA at 12 V 24 VDC 50 Watt 450 mm x 740 mm 450 mm x 660 mm 110 120 mm 4 2 possible 15 kg aluminium polyethylene ASA UV resistant 40 60 C 50 70 100 96 non condensed IP 65 resistant to salt fog IP 67 complies with EN 61000 4 2 3 4 5 6 CE conformity 200 400 12 00 1 800 00 mm h 0 20 30 mm min 0 10 500 00 mm
76. y regulated mechanical cleaning of the dew point mirror for maintenance free operation e Connectable to PC Modem GSM VTP37 is the combination of the proven Thermo hygrometer Thygan VTP6 and the control unit CU VTP The combination of this two instruments sa ves space and weight and helps reduce installati on efforts The VTP37 is a ventilated heated thermometer combined with a mirror type dew point hygro meter The instrument is designed for field Operation and meets the highest demands as to reliability and accuracy even under the most severe environmental conditions Its special features include Cyclic operation which allows automatic control and regulation of the most important functions The VTP37 measures the air temperature and dew point temperature about ten times within 40 seconds every ten minutes The instrument delivers the average values together with their standard deviations allowing the quality of the data to be checked e For special applications continuous operation can be selected by software command e The influence of moisture psychrometric effect radiation icing wind and electromagnetic inter ference from radio transmitters have been vir tually eliminated e Low power consumption permits battery operati on without heater e Automatically regulated mechanical cleaning of the dew point mirror allows maintenance free operation Hofstrasse 92 Thermohygrometer VTP37 mounted ele

Download Pdf Manuals

Related Search

Related Contents

User's Guide Series A.1 CSA  IBM G- MR G-Mouse GPS Receiver G-Mouse MR User's Manual  Associations et ASBL Cover  Solução de Limpeza Biochoque  LV-1.0/2.0 パワーアンプ基板 ［LV2  Casablanca 54102 Instructions / Assembly  USER`S MANUAL Cloud Email Firewall 4.3.2.4 1 Cloud Email  Hamilton Beach 35135 User's Manual    Let,S Spin 内容  

Copyright © All rights reserved. Failed to retrieve file