SL3954 User Manual
Contents
1. RGB LED Light Strip Kit i24 A remote controller User Manual 1 4 Please read this manual carefully before using this controller O Instructions for safety Making sure you use the product perfectly and safely please observe the instructions and warning on this manual Operate cautiously and read these instructions carefully 1 For installation try to avoid strong magnetic fields and high pressure areas 2 Ensure that the wire is connected correctly and firmly in order to avoid short circuit damage to parts and posing a fire hazard 3 Please install controller in a well ventilated place to ensure that the ambient temperature is moderate 4 Before using this product please check the DC power and voltage meet the product technical requirements positive and negative polarity is defined consistent to the product 5 Prohibit live wiring check to confirm wiring is correct if no short circuit then power Specifications Input power DC12V Output signal SPI signal Max load current 5A Drive IC number 20 100pcs Output power 60W 12V 2 Descriptions for panel and remote controller keys Name of keys Key in the static mode increases or decreases the LED brighiness up down and IC number Keys in a dynamic mode increase decrease speed OFF ON Turn on or off the LED s IC set Enter the IC configuration mode press this key all the lights bright white Static red green blue yellow green purple white Mo2. ct out IO ES Meteor across the left dripping effect loi Meteor across the right driping effect lolz Around the water circulation effect E The meteor from left to right to create a circulation effect E Press this key transition effects and press the CS button to choose colour 3 colour 7 Colour 16 color gradient effect E ix Press this key to flicker effect and CS press button can select monochrome tri colour 7 colour 16 colour flicker effect Flicker Automatic All patterns of circulation 4 Key sequence description Any pattern color changes are needed to enter the static mode choose a good colour after the choice of mode in order to achieve the desired results Troubleshooting 1 No power 1 Check the power 2 Reversed the polarity 2 Make sure the polarity is right No light 3 Wrong connection or poor contact 3 Re check the wire connection 1 Input wire is too long to cause wire 1 Shorten wire or use loop circuit 2 Calculate the current and then loss replace thick wire Brightness of LED 2 Diameter of wire is too thin to cause 3 Replace larger power is not consistent wire loss 3 Poweroverodd 4 Add a power amplifier 4 Controller overload 4 4
3. nochromatic Opening water by the middle of the left right push effect The static mode of red green blue yellow green purple white monochrome water Closing From both sides to the middle closing effect Colour Red green blue yellow cyan purple white seven kinds of selection monochromatic colour select A colar Press this key to red green blue circulating flash in a dynamic mode for flicker selection gradient colour Press this key for red green blue yellow cyan purple white 7 colour rainbow circulating flash In a dynamic mode for gradient flicker selection Red green blue yellow cyan purple white orange deep yellow light yellow light green Light blue dark blue sky blue blue and t6colour purple magenta choice of 16 colours Water left Red green blue yellow cyan purple white color of eachk left the water effect E Water right Red green blue yellow cyan purple white colour of each right of water Left gradient of From the left to the right of each IC 3 flashes lights and gradually shining light up all IC after all the extinguishing effect Shining right From right to left each IC3 flashes and gradually light effect gradient Left total From left to right each IC has 3 flashes lit after quenching lit by out gradientof all IC after all the light effect shining Right full From right to left each IC has 3 flashes lit lit by out all IC after all gradient flash the light effe
Download Pdf Manuals
Related Search