H-Series - Quality Certification Services
Contents
1. AWS American Weigh Scales Inc H Series H 11 11lb x 0 005Ib H 22 22lb x 0 011b H 66 66lb x 0 02Ib H 110 110Ib x 0 05Ib User Manual H Series Manual Thank you for purchasing the American Weigh H Series digital hanging scale Please read all operating instructions carefully before use This electronic scale is a precision instrument With normal care and proper treatment it will provide years of reliable service Never load the scale with more than the maximum capacity Overloading will permanently damage it Avoid any exposure to extreme heat or cold Your scale works better when operated at normal room temperature Always allow the scale to acclimate to normal room temperature for at least one hour before use Keep your scale in a clean environment Dust dirt moisture vibration air currents and a close distance to other electronic equipment can all cause an adverse effect on the reliability and accuracy of your scale Handle with care Gently apply all items to be weighed onto the hook Although this scale is designed to be quite durable try to avoid rough treatment as this may permanently damage the internal sensor Avoid shaking dropping or otherwise shocking the scale This is a precision instrument and must be handled with extreme care I OPERATION Place Scale on a horizontal flat surface 1 Place the scale in a vertical position with no weight on the hook 2 Press the ON button Wait2. r 88888 Change the batteries OUt2 Recalibrate the scale as shown above EEEEE You are overloading the scale Remove the excessive load immediately LLLLL The delicate weighing load cells have been damaged by misusing the scale i e it was shocked dropped or overloaded You can try recalibrating the scale If the load cell has not been damaged too much it will work again after recalibration UNST Use the scale in a more stable position Specifications Capacity 11Ib 221b 66 Ib 110 Ib 5 kg 10kg 30kg 50 kg Resolution 0 005 Ib 0 01 Ib 0 02 Ib 0 05 Ib 2g 10g 10g 20g 0 2 oz 0 5 oz 0 5 oz 1 oz Min Weight 100 grams Weighing Modes Ib kg Ib oz Power 2x CR2032 Batteries included replacement requires small phillips head screwdriver Auto Off 60 seconds Operating Temp 32 104 F
3. until zero is displayed 3 Hang the object s on the weighing hook 4 Using the SET key you can switch between the weighing units The scale will auto off after 60 seconds of no use Il TARE WEIGHING 1 Turn on scale as described above 2 Place the tare item on the hook 3 Press TARE and wait until zero is displayed 4 Add the net weight item Ill ADVANCED CALIBRATION Calibration is NOT required before first use Only calibrate if scale is not weighing properly 1 Turn off the scale 2 Press and hold the TARE and ON OFF keys at the same time 3 Release the ON OFF key first then the TARE key 4 You will see the offset number 1000 1800 5 Press TARE and CAL will flash followed by the first required calibration weight 6 Hang the first calibration weight from the hook and press TARE 7 The second reuired calibration weigh will be displayed Hang it on the hook and press TARE 8 The third required calibration weight will be displayed Hang it on the hook and press TARE NOTE To stop calibration press ON OFF at any time IV TROUBLESHOOTING The primary reasons for inaccuracy or malfunction are low batteries incorrect calibration overload or operating on an unstable surface Please keep this in mind and maintain and operate your scale properly This scale is a precise instrument and must be handled with the utmost care and caution Display Elimination of errors Nothing Battery Symbol lo o
Download Pdf Manuals
Related Search