User Manual - IVB 995-OH_M SD XC TYPE 22
Contents
1. 6 Use a crane or fork lift truck to position the FORKLIFT above the dirt tank 7 Attach the tank to the acces SOry 8 Dispose of the dirt in accord ance with legal regulations Inserting the disposal bag 9 Clean the dirt tank 10 Check the seals F between the tank and the upper sec tion of the vacuum cleaner 11 Insert the disposal bag G in the dirt tank 12 Fold the top edge of the dis posal bag over the rim of the dirt tank 13 Push the dirt tank as far as possible into the vacuum cleaner 14 Swing the bar B downwards without forcing it 22 Optional accessories Option depending on model Original Instructions 7 2 4 Replacing the safety filter bag During the following work en sure that dust is not unnecessarily spread around Wear a P2 breath ing mask Never use the vacuum cleaner with out a filter IVB 995 0H M SD XC Type 22 1 Switch off the vacuum clean er and pull the mains plug out of the socket 2 Apply parking brakes A both castors Removing the safety filter bag 3 Swing the bar B upwards 4 Use the handle C to pull the dirt tank out of the vacuum cleaner 5 Close the disposal bag with string D and remove it from the dirt tank WARNING f heavy dirt has been picked up never lift the dirt tank alone Use the FORKLIFT E which is available as an accessory 6 Use a crane or fork lift truck to position the FORKL2. 7 2 Maintenance 20 7 2 1 Check the antistatic 20 722 Emptying the dirt tank 21 7 2 3 Replacing the disposal 22 7 2 4 Replacing the safety filter 23 7 2 5 Replacing the filter element 24 7 2 6 Replacing the filter for air suppy to motor 25 8 Troubleshooting REM FE URN 26 9 Further information 9 1 Recycling the vacuum cleaner 27 9 2 0 2162 Sc Em m 27 9 3 Tests and ADDIOVANS er 27 9 4 EC declaration of conformity 27 9 9 Technical data EE i 28 9 6 Optional 28 Optional accessories Option depending on model 1 Original Instructions IVB 995 0H M SD XC Type 22 1 Important safety instructions Symbols used to mark instructions Purpose and intended use Prior to using the appliance for the first time be sure to read this document through and keep it ready to hand DANGER Danger that leads directly to serious or irreversible injuries or even death Danger that can lead to serious injuries or even death A Dang
3. Apply parking brakes A on both castors 3 1 4 Inserting the disposal bag 3 Swing the bar B upwards 4 Use the handle C to pull the dirt tank out of the vacuum cleaner 5 Insert the disposal bag D in the dirt tank 6 Fold the top edge of the dis posal bag over the rim of the dirt tank 14 1 Optional accessories Option depending on model Original Instructions IVB 995 0H M SD XC Type 22 7 Push the dirt tank as far as possible into the vacuum cleaner 8 Swing the bar B down wards without forcing it NOB EEG p AWiw 27 9 Close inlet fitting down with plug E 10 Connect suction hose to inlet fitting M top F 1 Optional accessories Option depending on model 15 Original Instructions IVB 995 0H M SD XC Type 22 4 Operation 1 Ensure that the cleaner is switched off 2 Insert the power cord into a properly installed and fused socket with earthing contact 4 4 Connections 4 1 1 Electrical connection The operating voltage shown on the rating plate must correspond to the voltage of the mains power supply 4 2 Switching on the Switch vacuum cleaner position 4 2 1 Switch I 0 II The hose diameter and the setting for the suction hose diameter must correspond suction SS Alig Wu D 0 4 3 Check volume flow 1 Check that all the filters in monitor cluding th
4. service department gt Motor is faulty Have motor changed by Nilfisk Advance Service The acoustic warning Suction power selected with Set suction power in sounds Reduced suction suction power control is too accordance with section power low oWitching on the vacuum cleaner Hose diameter and switch e Set correct switch position for position do not correspond hose diameter Clogged suction hose nozzle Clean suction hose nozzle Tank disposal bag or safety See Emptying tank or filter bag is full Replacing disposal bag safety filter bag sections Filter element is clogged See section Cleaning filter element and Replacing filter element Cleaning mechanism is e Contact Nilfisk Advance defective Service No suction power during gt Tank is full e Switch off the cleaner Empty wet cleaning the tank i Voltage fluctuations gt Impedance of power supply is Connect the cleaner to too high another socket closer to the fuse box Voltage fluctuations over 796 should not occur if the impedance at the transfer point is lt 0 15 O 26 1 Optional accessories Option depending on model Original Instructions 9 1 9 2 9 3 9 4 IVB 995 0H M SD XC Type 22 Further information Recycling the vacuum Make the old cleaner unusable immediately cleaner 1 Unplug the cleaner 2 Cut the power cord 3 Do not discard of electrical appliances with household waste As spe
5. 2 The mains plug should not yet be inserted into a socket 3 Apply parking brakes A on both castors 3 1 Assembling the vacuum cleaner 3 1 1 Taking accessories out of the packaging 4 Open the retaining clamps B and remove the upper section of the vacuum clean er W FOR 1 Y T iIIi JLL 5 Take the accessories C out of the dirt tank and the pack aging Optional accessories Option depending on model 11 Original Instructions IVB 995 0H M SD XC Type 22 3 1 2 Before starting the Depending on how hazardous the dust is the cleaner must be fitted cleaner with appropriate filters Type of dust Filter bag waste bag Non hazardous dust _ Waste bag 5 pcs Non carcinogenic Order No 302001480 dust with OEL values UM gt 0 1 mg m observe any additional national regulations e All dusts with OEL val Safety filter bag 5 pcs ues Order No 302003473 Wood dust e Explosive dust dust ex plosion class St1 St2 St3 in Zone 22 e All dusts with OEL values Filter element Wood dust Order No 107400564 Explosive dust dust ex ULV plosion class St1 St2 St3 in Zone 22 e Explosive dust dust ex 2 Motor cooling filter TYPE plosion class St1 St2 22 St3 in Zone 22 Order No 107400041 Before picking up dust with occupational exposure limit values 1 Check that all the filters are present a
6. H M SD XC Type 22 8 Carefully remove the filter element and close the pro tective filter bag with a knot Inserting the filter element 9 Clean the filter seal F Check it for damage and re place it if necessary 10 Check the antistatic clamp G for damage and have it replaced by Nilfisk Advance Service if necessary 11 Fit a new filter element E 12 Fit the filter holder D En sure that it is in the correct position 13 Fit bar and close bar handle C 14 Dispose of the used filter ele ment in accordance with le gal regulations 1 Remove filter cassette A 2 Remove filter element B from filter cassette 3 Dispose of the used filter ele ment in accordance with le gal regulations 4 Fit a new filter element 5 Attach the filter cartridge 7 2 6 Replacing the filter for air suppy to motor During the following work en sure that dust is not unnecessarily spread around Wear a P2 breath ing mask Never use the vacuum cleaner with out a filter 1 Optional accessories Option depending on model 25 Original Instructions IVB 995 0H M SD XC Type 22 8 Troubleshooting Motor does not start gt Fuse ofthe mains socket has Connect mains fuse blown Overload protection switch e Switch off the vacuum cleaner has tripped and allow it to cool for approx 5 minutes If the cleaner cannot be started again contact the Nilfisk Advance
7. IFT above the dirt tank 7 Attach the tank to the acces sory 8 Dispose of the dirt in accord ance with legal regulations Inserting the safety filter bag 9 Clean the dirt tank 10 Check the seals F between the tank and the upper sec tion of the vacuum cleaner 11 Insert the safety filter bag G in the dirt tank 12 Fold the top edge of the dis posal bag over the rim of the dirt tank 13 Push the dirt tank as far as possible into the vacuum cleaner 14 Swing the bar B downwards without forcing it 1 Optional accessories Option depending on model Original Instructions 23 IVB 995 0H M SD XC Type 22 7 2 5 Replacing the filter element H During the following work en sure that dust is not unnecessarily spread around Wear a P2 breath ing mask Never use the vacuum cleaner with out a filter 1 Switch off the vacuum clean er and pull the mains plug out of the socket 2 Apply parking brakes A both castors 3 Opentheretaining clamps B and remove the upper sec tion of the vacuum cleaner Remove the filter element 4 Lay the upper section of the cleaner down with the filter element facing upwards 5 Unscrew the screw C open the bar handle and remove it 6 Remove the filter holder D 7 Place the protective filter bag over the filter element 24 1 Optional accessories Option depending on model Original Instructions IVB 995 0
8. IVB 995 0H M SD XC Type 22 Operating Instructions 107400432 A mu E ONilfisk setting standards Printed in Hungary Contents IVB 995 0H M SD XC Type 22 1 Important safety Se EEE a E adaa 2 2 Description 2 1 Operating neser 9 2 2 Operating DANS vassere 10 3 Before starting the 3 1 Assembling the vacuum 11 cleaner 3 1 1 Taking accessories out of the packaging 11 3 1 2 Before starting the 12 3 1 3 Inserting the safety filter bag 12 3 1 4 Inserting the disposal bag 14 4 Control Operation 4 1 PENE 16 4 1 1 Electrical connection 16 4 2 Switching on the vacuum 16 LUNES UII uM 16 4 3 Check volume flow monitor eese 16 4 4 Acoustic warning basada 16 4 5 Cleaning the filter element esee 17 5 Applications and L ENES 18 methods 5 1 1 Picking up dry 5005 2 18 5 1 2 Picking UD GU Tm 18 6 After using the cleaner 6 1 Switching the vacuum cleaner off and storage 19 7 Maintenance 7 1 Maintenance 20
9. IVB 995 0H M SD XC Type 22 Risks Electrical components DANGER Electric shock due to faulty mains connecting lead Touching a faulty mains connecting lead can result in serious or even fatal injuries Do not damage the mains power lead e g by driving over it pulling or crushing it Regularly check whether the power cord is damaged or shows signs of ageing Have the faulty mains connecting lead replaced by your Nilfisk Advance service representative or a qualified electrician prior to using the appliance again DANGER The upper section of the vacuum cleaner contains live components Contact with live components leads to serious or even fatal injuries 1 Never spray water on to the upper section of the vacuum cleaner Damage due to unsuitable mains voltage The appliance can be damaged as a result of being connected to an unsuitable mains voltage 1 Ensure that the voltage shown on the rating plate corre sponds to the voltage of the local mains power supply Picking up liquids Picking up liquids Due to their construction vacuum cleaners with a removable tank SD do not have an automatic level indicator There is a risk of damage to the vacuum cleaner due to overfilling or of damage due to leakage of the picked up liquid 1 Never pick up more than 40 litres at once 2 Switch off the vacuum cleaner and empty the dirt tank 6 Optional accessories Option depending on model Original Inst
10. an enhance the cleaning action and reduce the cleaning effort Effective cleaning is achieved if you follow just a few guidelines in combination with your own practical experience in special fields Here are some basic tips There must always be a safety filter bag in the tank before dry sub stances with maximum room concentration values are picked up oee section Optional accessories for ordering number To pick up harmless dust we recommend the use of a waste bag See section Optional accessories for ordering number Disposal of the picked up material is then simple and hygienic After picking up liquids the filter element is wet A damp filter ele ment clogs more quickly when dry substances are picked up For this reason the filter element should be washed and dried or replaced by a dry element before dry substances are picked up CAUTION Do not pick up flammable liquids Before liquids are picked up always remove the filter bag disposal bag The use of a separate filter element or filter screen is recommend ed If foam appears stop work immediately and empty the tank To reduce the amount of foam use foam killer Alto Foam Stop see section Accessories for order number 18 1 Optional accessories Option depending on model Original Instructions 6 After finishing work 6 1 Switching the vacuum cleaner off and storage IVB 995 0H M SD XC Type 22 After picking up hazardous dust vacuum cl
11. cified in European Directive 2002 96 EC on old elec trical and electronic appliances used electrical goods must collected separately and recycled ecologically Contact your local authorities or your nearest dealer for fur ther information Guarantee Our general conditions of business are applicable with regard to the guarantee Unauthorised modifications to the appliance the use of incorrect brushes in addition to using the appliance in a way other than for the intended purpose exempt the manufacturer from any liability for the resulting damage Tests and approvals Electrical tests must be performed in accordance with the provisions of safety regulations VBG4 and to DIN VDE 0701 Part 1 and Part 3 In accordance with DIN VDE 0702 these tests must be performed at regular intervals and after repairs or modifications The vacuum cleaner has been approved in accordance with IEC EN 60335 2 69 Equally the cleaners fulfil the requirements of the ATEX regulation 94 9 EG for use in zone 22 EC declaration of conformity C EC conformity declaration NILFISK ADVANCE A S Sognevej 25 DK 2605 Br ndby Product Vacuum cleaner for wet and dry operation Description 230 240 V 50 60 Hz 2x1200W Dust Class M and H ATEX Zone 22 Il 3D Ex tD A22 T135 IP54 The design of this appliance EC Machinery Directive 2006 42 EC complies with the following EC Directive EMC 2004 108 EC provisions EC Explosive Atmosphere direct
12. d checked DOEL Occupational Exposure Limit Original Instructions IVB 995 0H M SD XC Type 22 Dust Class M medium The dusts which belong to this class M are dusts with OEL values gt 0 1 mg m as well as saw dust The machine is tested in its entirety by vacuums for this dust class The maximum degree of permeability is 0 1 and the disposal must be low dust 4 Dust Class H high The dusts which belong to this class are H dusts with OEL values all carcinogenic dusts and dusts which are mixed with pathogenic agents Vacuums for Dust Class H are tested in their entirety and have a maximum degree of permeability of 0 005 The disposal must be dust free Machines to be used in Zone 22 are marked as Type 22 vacu ED UMS e These machines may be used for picking up dust from dust class L M or H e Zone 22 is defined as environments where flammable dusts are present for short periods only e g less than 10 hours per year e Type 22 machines are suitable for use as dust extractors The air flow in safety vacuum systems has to be strictly controlled to achieve a minimum flow rate of V 20 m s in the suction hose The vacuum cleaner ATTIX 995 0H M SD XC is suitable for picking up e flammable liquids flashpoint 55 C or higher e Sawdust and dusts hazardous to health including dusts with OEL values carcinogenic dusts and dusts containing germs and patho gens e Flammable dry
13. dust in Zone 22 Use the cleaner only if it is certain that no active sources of ignition can be sucked in Conductive extraction equipment e g extraction hoods on machines and conductive parts of machining equipment e g equipment in protec tive class 1 that are not earthed through the cleaner must be earthed in some other way to prevent electrostatic charges When picking up flammable dust in Zone 22 the dirt tank must be emp tied as required but always after use It must be assured that dust not accumulate on the appliance by regular cleaning The vacuum cleaner must be used only if all filters as well as the filter for the motor cooling air are attached and without damage The cleaner is not suitable for extraction on machining equipment in operation that could produce sources of ignition When dust removers are used the rate at which air is exchanged in the room must be adequate if the exhaust air from the vacuum OEL Occupational Exposure Limit Original Instructions 3 IVB 995 0H M SD XC Type 22 Transport Storage Electrical connection Extension lead cleaner is blown into the room please observe regulations valid in your country The appliance is suitable for commercial use such as e g in Hotels Schools Hospitals Factories Shops Offices Hire shops Any other use is considered as improper use The manufacturer ac cepts no liability for any damage resulting from such use The ri
14. e filter for supply air to the motor are present Before picking up dust with maxi properly fitted and not dam mum room concentration values aged 2 When the motor is running hold the suction hose shut An acoustic warning sounds after approx I second 4 4 Acoustic warning For safety reasons an acoustic warning sounds if the air speed in the suction hose drops to be low 20 m s See section Trou bleshooting 16 1 Optional accessories Option depending on model Original Instructions IVB 995 0H M SD XC Type 22 4 5 Cleaning the filter element XtremeClean Only for vacuum cleaning without a Automatic Filter Cleaning System cloth insert filter m d UH d DD Y To ensure that suction performance is always at its best the filter element is automatically cleaned during operation We recommend complete cleaning if the filter element becomes extremely dirty 1 Switch off the vacuum cleaner 2 Close the nozzles or suction hose opening with the palm of your hand 3 Turn the switch to position l and let the cleaner operate for ap prox 10 seconds with the suction hose opening closed Optional accessories Option depending on model 17 Original Instructions IVB 995 0H M SD XC Type 22 5 Applications and techniques 5 1 Techniques 5 1 1 Picking up dry substances 5 1 2 Picking up liquids If used correctly additional accessories suction nozzles and suc tion hoses c
15. e socket 2 Apply parking brakes A on both castors Removing the dirt tank 3 Swing the bar B upwards 4 Use the handle C to pull the dirt tank out of the vacuum cleaner 5 Tipping out the collected dirt WARNING If heavy dirt has been picked up never lift the dirt tank alone Use the FORKLIFT D which is available as an accessory 6 Use a crane or fork lift truck to position the FORKLIFT above the dirt tank 7 Attach the tank to the acces sory 8 Dispose of the dirt in accord ance with legal regulations Inserting the dirt tank 9 Clean the dirt tank 10 Check the seals E between the tank and the upper sec tion of the vacuum cleaner 11 Push the dirt tank as far as possible into the vacuum cleaner 12 Swing the bar B downwards without forcing it Optional accessories Option depending on model 21 Original Instructions IVB 995 0H M SD XC Type 22 1 Switch off the vacuum clean er and pull the mains plug out of the socket 2 Apply parking brakes A on both castors 7 2 3 Replacing the disposal bag Removing the disposal bag 3 Swing the bar B upwards 4 Use the handle C to pull the dirt tank out of the vacuum cleaner 5 Close the disposal bag with string D and remove it from the dirt tank WARNING If heavy dirt has been picked up never lift the dirt tank alone Use the FORKLIFT E which is available as an accessory
16. ean the out side of the cleaner Switch off the vacuum clean er and pull the mains plug out of the socket Make sure that both plugs are inserted in fittings Wind up the power cord and hang it on the handle Empty the tank and clean the vacuum cleaner After picking up liquids Store the upper section of the cleaner separately so that the filter element can dry Store the vacuum cleaner in a dry room where it is pro tected from unauthorized use 1 Optional accessories Option depending on model Original Instructions 19 IVB 995 0H M SD XC Type 22 7 Maintenance Maintenance plan When replacing After finishing When required the filter bag work waste bag or filter element Replacing the disposalbag 1 l Replacing the safety filter bag 7 2 5 Replacing the filter element KE NRI 7 2 6 Replacing the filter for air supply to motor 7 2 Maintenance work 7 2 1 Check the antistatic clamps 1 Check the antistatic clamps for damage and have them replaced by Nilfisk Advance Service if necessary Do not use the cleaner with dam aged or missing antistatic clamps Risk of explosion due to static dis charge in explosive atmospheres 20 1 Optional accessories Option depending on model Original Instructions IVB 995 0H M SD XC Type 22 7 2 2 Emptying the dirt tank 1 Switch off the vacuum clean er and pull the mains plug out of th
17. ej 25 DK 2605 Br ndby Denmark Tel 45 43 23 81 00 Fax 45 43 43 77 00 www nilfisk advance com
18. er that can lead to minor injuries and damage The appliance must e only be used by persons who have been instructed in its correct usage and explicitly commissioned with the task of operating it only be operated under supervision not be used by children Before starting work the operating staff must be informed on use of the vacuum cleaner risks associated with the material to be picked up e safe disposal of the picked up materia 1 Do not use any unsafe work techniques 2 Never use the vacuum cleaner without a filter 3 Switch off the appliance and disconnect the mains plug in the following situations Prior to cleaning and servicing Prior to replacing components Prior to changing over the appliance f foam develops or liquid emerges Besides the operating instructions and the binding accident preven tion regulations valid in the country of use observe recognised regu lations for safety and proper use Since 1997 there is a new division of hazardous dusts and their as signed vacuum machines These are regulated by IEC 60335 2 69 world wide and by EN 60335 2 69 European wide The safety label on the machine warns This appliance contains dust hazardous to health Emptying and maintenance operations including removal of the dust collecting means must only be carried out by authorized personnel wearing suitable personal protection Operate only after the full filtration sys tem has been fitted an
19. f the appliance 1 Only use spare parts and accessories from Nilfisk Ad vance 2 Use only the brushes supplied with the vacuum cleaner or specified in the operating manual Emptying dirt tank Picking up environmentally hazardous materials Materials picked up can present a hazard to the environment 1 Dispose of the dirt in accordance with legal regulations 8 Optional accessories Option depending on model Original Instructions IVB 995 0H M SD XC Type 22 2 Description 2 1 Operating elements 15 1 2 14 3 13 12 4 11 el f 19 Zac ZN 9 SS RSs VG XN o o lt 7 EAR i _ DJ gt 1 Optional accessories Option depending on model Original Instructions IVB 995 0H M SD XC Type 22 Handle Outlet for waste air Inlet for fresh air Filter for air supply to motor Retaining clamp Grip to empty tank Handle to remove dirt tank Bracket for floor nozzle Castor with brake Dirt tank 10 Inlet fitting H 11 Inlet fitting M 12 Receptacle for electrical lead 13 Applicance switch 1 0 II 14 Hose diameter setting 15 Accessory holder 2 2 Operating panel 10 1 Optional accessories Option depending on model Original Instructions IVB 995 0H M SD XC Type 22 3 Before starting the cleaner 1 Take vacuum cleaner and accessories out of the pack aging
20. ive 94 9 EC ATEX Applied harmonized standards EN ISO 12100 1 2004 EN ISO 12100 2 2004 EN 55014 1 2006 EN 55014 2 2001 EN 61000 3 2 2006 EN 61241 1 2004 EN 61241 10 2004 Applied national standards and EN 60335 2 69 2009 technical specifications IEC 60335 2 69 2008 Anton S rensen General Manager EAPC Technical Operations Br ndby 2008 06 01 Optional accessories Option depending on model 27 Original Instructions IVB 995 0H M SD XC Type 22 9 5 Technical data 995 0H M SD Type 22 Voltage IL N Mains frequency Fuse Power consumption zc Total connected load Air flow rate l min hPa mbar Vacuum kPa Sound pressure level at a distance of 1 m EN 60704 1 Sound level UJ JE IER 2 m 10 HO7RN F3G1 5 mm HO5RR F3G1 5 mm IP 54 EN 55014 1 615 Power cord Length Power cord Type Protection class Type of protection splash water protected Radio interference level Tank volume Width mm Depth vem _ mee h nn 90 9 6 Optional accessories echo OdeNe Safely fiter bag spes 1 3023988 _ Disposalbag spes 1 20009 FWerdemetm _ Protective filter bag 10 30082 Fiterscreen 302002885 Alto Foam Stop 6 x 1 I 8469 28 1 Optional accessories Option depending on model Original Instructions ONilfisk setting standards Nilfisk Advance A S Sognev
21. nd properly fitted 2 Do not use the cleaner with damaged or missing antistatic clamp Risk of explosion due to static discharge in explosive atmos pheres 3 The hose diameter and the setting for the suction hose diameter must be the same 4 When the motor is running hold the suction hose shut For safety reasons an acoustic warning sounds if the air speed in the suc tion hose drops to below 20 m s 3 1 3 Inserting the safety NN AIAN filter bag L S 1 The mains plug should not yet be inserted into a socket 2 Apply parking brakes A on both castors b Y X 12 Optional accessories Option depending on model Original Instructions IVB 995 0H M SD XC Type 22 3 Swing the bar B upwards 4 Use the handle C to pull the dirt tank out of the vacuum cleaner 5 Insert the safety filter bag D in the dirt tank 6 Fold the top edge of the dis posal bag over the rim of the dirt tank 7 Push the dirt tank as far as possible into the vacuum cleaner 8 Swing the bar B down wards without forcing it d d 4 wow KIA AW Nee 0 MEL Vy ER NI 9 Close inlet fitting top with plug E 1 Optional accessories Option depending on model 13 Original Instructions IVB 995 0H M SD XC Type 22 10 Connect suction hose to inlet fitting down F 1 The mains plug should not yet be inserted into a socket 2
22. ructions IVB 995 0H M SD XC Type 22 Hazardous materials Hazardous materials Vacuuming up hazardous materials can lead to serious or even fatal injuries 1 The following materials must not be picked up by the vacuum cleaner hot materials burning cigarettes hot ash etc flammable explosive aggressive liquids e g petrol solvents acids alkalis etc mixtures of flammable dusts with liquids explosive substances or substances considered to be similar in 1 of the law on explosives flammable dusts with an extremely low minimum igni tion energy 1 mJ also observe national regulations Highly reactive dusts or dusts with a high affinity to oxy gen For dusts like titanium and magnesium additional requirements apply consult your national labour authorities or the manufacturer of the vacuum cleaner When the vacuum cleaner has been used with dust classified as it is necessary to clean the machine thoroughly before using the machine with dust classified as M or lower 1 Optional accessories Option depending on model 7 Original Instructions IVB 995 0H M SD XC Type 22 Spare parts and accessories Spare parts and accessories For picking up flammable dust in Zone 22 Only use accessories which are certified by the manufacturer of the Type 22 machine The use of other accessories can cause danger of explosion The use of non genuine spare parts and accessories can impair the safety o
23. sk for such use is borne solely by the user Proper use also includes proper operation servicing and repairs as specified by the manufacturer Domim Before transporting the dirt tank close all the locks Make sure that both plugs are inserted in fittings Do not tilt the cleaner if there is liquid in the dirt tank Do not use a crane hook to lift the cleaner Store the appliance in a dry place protected from frost Itis recommended that the vacuum cleaner should be connected via a residual current circuit breaker When picking up flammable dust in zone 22 extension lines couplings and adapters must not be used Arrange the electrical parts sockets plugs and couplings and lay down the extension lead so that the protection class is main tained Connectors and couplings of power supply cords and extension leads must be watertight As an extension lead only use the version specified by the man ufacturer or one of a higher quality When using an extension lead check the minimum cross sec tions of the cable Cable length up to 20 m 20 to 50m DOEL Occupational Exposure Limit Original Instructions Maintenance cleaning and repair IVB 995 0H M SD XC Type 22 During the following work ensure that dust is not unnecessarily spread around Wear a P2 breathing mask Only carry out maintenance work described in the operating instruc tions Always pull out the mains plug before cleaning and main
24. tenance of the vacuum cleaner During maintenance and cleaning handle the vacuum cleaner in such a manner that there is no danger for maintenance staff or other persons In the maintenance area 1 Use filtered compulsory ventilation 2 Wear protective clothing 3 Clean the maintenance are so that no harmful substances get into the surroundings Before removing the vacuum cleaner from the area contaminated with harmful substances 1 Clean the outside of the vacuum cleaner wipe it clean or pack the vacuum cleaner in well sealed packaging 2 and avoid spreading deposited harmful dust Warning Do not reuse the essential filter element after removal out of the appliance only for class H appliances During maintenance and repair work all contaminated parts that could not be cleaned satisfactorily must be 1 packed in well sealed bags 2 disposed of in a manner that complies with valid regulations for such waste removal At least once a year a Nilfisk ALTO technician or an instructed per son must perform a technical inspection including filters air tight ness and control mechanisms According to AA 22 201 2 appliances in class H must have their filtration efficiency checked once a year If the effiency of the filter does not fulfil the requirements for dust class H the filter must be replaced and the new filter must be tested ac cording to AA 22 201 2 1 OEL Occupational Exposure Limit Original Instructions
Download Pdf Manuals
Related Search