English user manual
Contents
1. D 5 Loosen the screw E and turn around the knee support for backstanding children Adjust the knee support with the enclosed 6 mm Allen key Loosen the screws C and D and the knee supports are depthadjustable By loosening the screw E the knee supports adjust in width and angles Use the handle B to adjust the height of the complete knee support unit FOOT SUPPORT For use of back standing When the knee support is turned the foot sup ports must be mounted in the same side as they were demounted 1 Mount the foot supports and tighten the handle A 2 Loosen the screw B and adjust the depth of the foot support 3 Loosen the screws C and D and turn the foot support 180 4 Tighten the screws in the requested position The foot plate mounting is mounted on the joint By means of this the footplate can be adjusted in different angles by loosening the screws C og D The plate can be adjusted in the depth by loosening the handle E or the unbracho screw B TRAY WITH WITHOUT BOWL Place the tray mounting in the two pibes on the back Fasten with the handle A Loosen the big handle B and the tray mounting can be turned for either prone or supine use Place the tray i the mounting Fasten with the enclosed 6 mm Allen key C in the wanted position Loosen the handle A to adjust the height of the tray Loosenthe handle B to adjust the angle for the tray The2. There is a 5 years guarantee on frame breaks The guarantee is given by the R82 dealer or subsequent R82 representative The guarantee can only be sustained if the R82 product is in use in the same country as produced for The guarantee does not cover accidential damages including damages caused by misuse or neglect The guarantee stops if the se rial number is removed or if the product is repaired or changed by others than authorized R82 staff TOOLS Use the enclosed 6 mm Allen key to perform the adjustments where described in this manual MAINTENANCE The Buffalo functions without maintenance but it is recommended to clean the frame frequently Do not use any cleaning materials containing chlorine or methylated spirit The carer should check and oil the swing away parts occasionally We re commend to use a synthetic teflon oil A Do not expose the gasspring to pressure high temperatures or perforation Adjustments which are not described in this manual must only be made by authorized R82 personnel READY FOR USE The Gazelle PS is folded when delivered to obtain as little space as possible during trans portation Follow the description below to unfold your Gazelle PS 1 Make sure that the four wheels are locked 2 Press against the floor frame with your foot as the Gazelle PS is raised to vertical position Make sure the Gazelle PS fits exactly into the fitting on the floor frame 3 With the Gaz
3. Rac gazelle ps English user manual 2004 R82 A S All rights reserved The R82 logo and the bathing chair Manatee are registered trademarks of R82 A S 09 2006 cci e H9 4 CSA AIMS Tp 4 Maintenance NETT IS 4 eo me HTC REN 4 gie Hc gi mem 5 Head support with facial aperture 6 Trunk support and extension a eoe p tax oko ni aprum re dnRod 6 Strap eraistean e d a EE addu d dau balia 7 Back SUPPO iindern EE EEEE 7 Side SUPPOTT tx area iarciet tana dades at RE jadi d a al s pag 8 Independent abduction nnnzaaaaivavavnvavaassas ssaasaaaaaaa 9 Angling of lower Igea rite e 10 Kheee SUPPO M aaa 11 IDOL SUP DORE eerren ndum Rpu enda ESEE 12 Tray with without DOWI Mt ska an 13 ANGING ienne addu cda opa eiea g Db e sU e 2G up Qua MEE 14 Adjusting the gas spring aaaaaaasss ssss sssssssssaaaaaaa 15 Product identification nnaaaaaaaaaaannnnnnnannnaanananaann 16 Mui filz d CNN TT 17 Tecnical data MN ROREM ORENSE 18 Manufacturer ss ass ex ro rini EE ER 18 Dealer a a EEEE EAEE 18 Pat pend GAZELLE PS Congratulations on choosing the Gazelle PS We are absolutely certain that it will meet your expectations to a modern aid like this The Gazelle PS is available in 3 sizes and is for children from 1 to 14 years of age The many adjustment pos sibilities and the wide range of accessories mean that it adjusts to
4. are when refitting the back sup port SIDE SUPPORT Mount the side supports on the trunk support to give the rightsupport to the upper part of the body or on the basic plate to support the body and hips The side supports are adjustable in height and in width A INDEPENDENT ABDUCTION Adjusting the abduction 0 30 by turning the handle in both sides A Retractable handle for tilt adjustment B ANGLING OF LOWER LEG Mount the bar for the lower leg angling on the abduction bar as follows 1 Loosen the handle A to remove the support 2 Loosen the Allen screw B to remove the knee supports 3 Mount the knee support on the bar for the lower leg angling and tighten the handle A 4 Mount the foot support on the bar for the lower leg angling Adjust the hight of the lower leg angling by tur ning the handle B and adjust the angling by turning the handle C To adjust the foot support see page 16 KNEE SUPPORT As standard the Gazelle PS is devivered with knee supports mounted to be used by front stan ding children Turn around the knee supports to be able to use it for backstanding children 1 Loosen the handle A to remove the foot supports 2 Loosen the handle B to remove the complete knee support unit 3 Mount the complete knee support unit on the opposite side and fasten with the handle 4 Turn the fitting for the knee support 1800 by loosening the screws C and
5. children with different types of handicaps The Gazelle PS is primarily for prone standing however supine standing is also possible Its tilts infinitely from vertical to 15 past horizontal It s best to place the child with the Gazelle PS in horizontal position For children with the need of additional support side supports and a facial plate can be mounted Table with or without bowl can be used to occupy the child and to support the child s arms This manual will help you take full advantage of your Gazelle PS w G SAFETY The Gazelle PS is CE marked according to European safety requirements directive 83 42 E F from 14 june 1993 regarding medical class arrangements This is your garantee that it fulfills all European health and safety requirements The durability of this product is 7 years when it is used on a daily basis Hereafter we recommend that the product should be renovated by R82 personnel to extend the lifetime Remove the CE mark when rebuilding the product or when using other than original R82 spare parts Never leave your child unattended in this product Ensure permanent super vision by an adjult Incorrect use of the Gazelle PS may cause serious injury to the user Take care that all the fixations and adjustments are placed and fitted correctly and check it on a regular basis GUARANTEE Any R82 product bought with an R82 dealer includes a guarantee against defects in types and materials
6. elle PS a in vertical position use the enclosed 6 mm Allen key to fasten the screw A The Allen key is placed on the Gazelle PS B and is always nearby for adjustments HEAD SUPPORT WITH FACIAL APERTURE Mounting of Head support with facial aperture A The two retaining bars go through the ad justable trunk support after removal of two plastic plugs B Positioning knobs can be screwed into place after making cut outs in the adjustable trunk support It can be helpful to mount the head support with facial aperature before placing the child on the table in horizontal position Remove the head support when the table is raised into vertical position TRUNK SUPPORT AND EXTENSION Height adjustable trunk support and extension can be mounted onthe Gazelle PS A Fasten the screws on the back B STRAP Mount the strap on the trunk support or on the basic plate considering where the support is needed The strap is mounted on the back A and fastend i front with velcro and a snap lock fitting B BACK SUPPORT The back support is adjustable in height A and in depth B Before placing the child 1 Remove the back support C 2 Fold down the fitting for back support by pul ling the release chain D Fasten with the handles Be aware if the child sit on the mounting for the back support There must always be a couple of centimetres between the child and the mounting NB Take c
7. ing angling V 90 til 15 90 til 15 Weight 20 kg 22 kg Max load 40 kg 60 kg Size 3 90 cm 70 125 cm 65 cm 99 cm 90 til 15 24 kg 80 kg TECNICAL DATA Frame Powder lacquered steel 37 Chromed steel 37 Upholstery PUR Polyurethan MANUFACTURER DEALER R82 A S Parallelvej 3 8751 Gedved Find your dealer at www r82 com
8. tray with bowl is delivered with an extra plate so it can be used as a normal tray ANGLING Degree indicator A Adjust the angel of the Gazelle PS from vertical to 15 under horizontal by pressing the foot pedal B As security the foot pedal can be locked at the wanted angle position Turn the button at the lower end of the gasspring and the Gazelle PS locks C ADJUSTING THE GAS SPRING Gazelle PS is equipped with a gas spring for angle adjustment After a while it might need ad justment The adjustment is necessary when the gas spring is releasing itself the gas spring can not be released If the gasspring releases itself loosen the nut B with and 17 m m wrench key Turn the bar A anti clock wise to tighten Tighten the nut B again If the gasspring will not release loosen the nut B with a 17 m m wrench key Turn the bar A clock wise to loosen Tighten the nut B again PRODUCT IDENTIFICATION A Serial number The label is placed under the frame B Manufacturer The label is placed on the back of the frame by the left rear wheel Dato 31 01 02 Belast kg SN 0840 01 111878 001 Vai 880003 renr 5707292 134158 RB2 cc Parallelvej 3 DK 8751 Gedved MEASUREMENTS Size 1 Size 2 Height horizontal H 76 cm 80 cm Length foot axil L 45 95 cm 60 105 cm Total width frame TB 48 cm 58 cm Total length frame TL 76 cm 88 cm Position
Download Pdf Manuals
Related Search