Home
EasySlide™ and RollerSlide™ Transfer Devices Competency
Contents
1. Locate and remove operate red on off switch verbalize understanding of charging 10 Locate andoperateemergencydown fomshainbed commodatolst fT from chair bed commode toilet 12 Demonstrate proper body mechanics when moving lift pf with patient Explain significance of ergonomic design aeneae nee T relates to lift design 14 Caregiver verbalizes knowledge of where lift sling poductownermanuasarekspe nn o I understand how to use the equipment and all of my questions have been answered If have any questions prior to use of lift will consult the owner user manual for the Mini 200 Stand Assist Lift Name Title Signature Evaluator Signature Date SystemRoMedic 3 25 13 TM L handicare F exiGrip Sit Stand Manual Aid Clinical Guidelines for Use Competency Statement After attending this orientation the clinician will be able to properly use specialty equipment according to manufacturer s recommendations If the performance criteria are not met additional training will be provided If the caregiver has any questions always consult the product owner manual prior to use or contact your Handicare Representative Objective Caregiver will be able to choose the correct transfer assistive device and demonstrate competency by instructing the patient on safely transferring from a seated position between wheelchair and bed commode or chair For transfer where a gap must be bridged an EasyGlide transfer board should
2. additional training will be provided If the caregiver has any questions always consult the product owner manual prior to use or contact your Handicare Representative Objective Caregiver will be able to choose the correct transfer device and demonstrate competency by safely transferring the patient from stretcher to bed bed to stretcher or repositioning patient up in bed Directions Check the appropriate box for each performance criteria Schedule retraining as indicated PURING TASK Transferring a patient from stretcher to bed or bed to stretcher is a two person task unless otherwise stated in your facility policy and procedure for transfer devices If the patient is overweight or has tubes or drains an additional caregiver may be required to protect the tubes and lines 2 When transferring a patient from bed to stretcher or stretcher to bed make certain that the head of the bed and stretcher are in a flat position and the receiving surface is slightly lower than the transferring surface The height of the bed and stretcher should be at a safe working height and must allow the caregiver to transfer the patient without bending over the surface 3 Make sure thatthe bed wheel locks and stretcher wheel locks are engaged V T 7 Place a draw sheet underneath the patient to assist in log rolling the patient ee ae onto the transfer device ReadySheet Slide sheet 5 Log roll the patient toward the caregiver and away from the surface that
3. be used Directions Check the appropriate box for each performance criteria Schedule retraining as indicated ALWAYS EXPLAIN PROCEDURE TO RESIDENT OR PATIENT BEFORE AND TASK Product description a FlexiGrip is used as a helpful grip that facilitates more active raising of the patient from a recumbent to a seated position b FlexiGrip is used to provide leverage to transfer and reposition c The FlexiGrip supports a maximum weight of 330 Ibs d See product manual for cleaning instructions Functional inspection a Always check assistive device after laundering and regularly to insure that the product is not worn damaged or bleached b Pull on handles to assure they can withstand a heavy load and if there are signs of wear the product should be discarded Placement of Flexigrip Fasten the FlexiGrip by drawing the straps through the loops to cinch to a Stable strong structure on the bed such as frame mattress pan or other secure place that can withstand the maximum weight and pull force Caution Never cinch FlexiGrip to a part on the bed that moves Transferring a patient a Using the FlexiGrip from a seated position between wheelchair and bed toilet or chair can be performed by the patient or individual with minimal or no assistance from the caregiver The FlexiGrip should be attached to the opposite side of the transfer point to provide leverage for the patient Example If a patient is transferring from a wheelchair to a
4. Signature SystemRoMedic Evaluator Signature Date 3 26 13 WY handicare MultiLift Mobile Lift Competency Assessment Competency Statement After attending this orientation the clinician will be able to properly use specialty equipment according to manufacturer s recommendations If the performance criteria are not met additional training will be provided If the caregiver has any questions always consult the product owner manual prior to use or contact your Handicare Representative Directions Check the appropriate box for each performance criteria Schedule retraining as indicated Describe and demonstrate equipment features understanding Safety checks Battery Locate and remove operate red on off switch verbalize understanding of charging system 3 quick short beeps indicate recharging necessary Mast and boom secure all nuts and bolts secure Only operate motor driven MultiLift on flat surface Locate and operate emergency down Sling free of defects tears or fraying of loops rene Pe of MultiLift 550 ee ee ee 1 Identify lift capacity is within limits for patient 550lb max 2 net contas are avatale emote and one tng mast Be va 3 MutiLift is motor driven patient lift controlled by a steering handle The rear wheel can turn meaning that the lift can be moved sideways or rotate on its own axis and be placed where exactly required 4 The Lifting Mast can telescope up and down to provide various lifting height options
5. and the lifting strap can lower or raise independently Demonstate 5 Demonstrate lift controls using info control panel and remote controls Drive lift forward and backward side to side and operate the mast up and down 6 Brake locking can be activated with the brake pawl on the rear wheel Never release by hand and always unlock wheels when lifting esded Cee erder bod or around cheir usina eg spreader banon as fOO needed 8 Select appropriate sling and position under patient and attach same color straps on each side starting with the leg straps See sling selection guidelines 9 Press Up button to retract sling strap and raise patient in sling only high enough to clear surface For additional lifting height you may use the controls to raise the mast Move lift to receiving surface and center patient 10 Press down button on lift or hand control to lower lifting strap t e 11 Unhook sling from sling bar verbalize method DOOS a 12 Observe and verbalize understanding of Lift Transfer from chair bed TT floor 13 Caregiver can verbalize as to where the user manual is kept on the unit i I understand how to use the equipment and all of my questions have been answered If have wo questions prior to use of lift will consult the owner user manual for the MultiLift 550 floor lift product Name Title Signature SystemRoMedic Evaluator Signature Date 3 26 13 y handicare MiniLift 200
6. bed then position the bed slightly lower than the wheelchair Place the bed with the head of bed in a seated position Use an EasyGlide or other type of slide board to bridge the gap The FlexiGrip should be secure to the opposite side of the bed to the frame Hand the loop ladder to the patient individual The FlexiGrip can be used as leverage for the transfer Sitting up in bed or on side of bed a The FlexiGrip can be used to sit up in bed for repositioning or to move to the side of the bed to facilitate egress from the bed This can be accomplished by securing the FlexiGrip to the frame at the foot of the bed The patient individual can use the loops as a ladder to pull them to a seated position or swing their legs to sit at the side of the bed I understand how to use the equipment and all of my questions have been answered If have any questions prior to use of the transfer device I will consult the owner user manual for the FlexiGrip Name Title Signature Evaluator Signature Date SystemRoMedic 3 26 13 H handicare EVA 450 and 600 Mobile Lift Competency Assessment Competency Statement After attending this orientation the clinician will be able to properly use specialty equipment according to manufacturer s recommendations If the performance criteria are not met additional training will be provided If the caregiver has any questions always consult the product owner manual prior to use or contact your Handicare Re
7. bending over the surface 7 Place a draw sheet underneath the patient to assist in log rolling the patieni onto the transfer device RollerSlide or EasySlide 5 Log roll the patient toward the caregiver and away from the surface that you intend to transfer the patient Receiving Surface 6 Place the RollerSlide or EasySlide under the patient about 4 6 inches and roll the patient flat onto the edge of the RollerSlide or EasySlide 3 The nurse on the side of the receiving surface should lift slightly and pull at the same time that the nurse on the side of the transferring surface closest to the patient lifts slightly and guides the patient onto the intended surface 9 Itis important at all times to protect the patients head and neck as well as assure that the patient s feet transfer freely If you are transferring larger patients it may require three caregivers to safely transfer the patient 10 Once the patient is transferred raise the side rails and head of bed or stretcher as needed I understand how to use the equipment and all of my questions have been answered If have any questions prior to use of the transfer device will consult the owner user manual for the RollerSlide or EasySlide Transfer Device Roller board Name Title Signature Evaluator Signature Date SystemRoMedic 3 26 13 TurnTable Transfer Device My handicare Competency Assessment Competency Statement Afte
8. this orientation the clinician will be able to properly use specialty equipment with digital scale according to manufacturer s recommendations If the performance criteria are not met additional training will be required If the caregiver has any questions always consult the product owner manual prior to use or contact your Handicare Representative Directions Check the appropriate box for each performance criteria Schedule retraining as indicated Describe and demonstrate equipment features understanding Safety checks e Make sure that scale is attached securely to Sling spreader bar e Follow safety checks for EVA 450 or 600 e Ensure the sling is free from defects Operation of Digital Scale System EE RoMedic Ss 1 Scale system attached and secure ae 3 E 2 Caregiver identifycontrol buttons for zero weigh and a kg lb 3 Attach empty sling to sling spreader scale system bar securely 4 Ensure the scale is hanging vertically and is free to pivot at both the top and bottom connection points 5 Ensure the scale system is free and clear of any obstructions 6 Press the Zero button to set the system to zero 0 will pan across the screen for a couple seconds Display will then read 0 0 7 Press Kg Lb button to choose display modes a 8 Remove the sling and position patient i a a 9 Position the patient into the sling and reattach the sling to the Sling spreader bar scale system ensurin
9. to allow the patient s knees to bend 3 Open and adjust seat swing pads to allow patient to stand and close seat swing pads for safety and sitting when necessary E Sandandeumtostingposton o ooo stand and return to sitting position gt bostera lock raar casters prior to etanging patent gt bolsters lock rear casters prior to standing patient ready to more patane ee ready to move patient _ _inreehoide back over alirased pamere thresholds back over all raised barriers nar bed eommodanonet ee fT chair bed commode toilet 9 Demonstrate proper body mechanics when moving QuickMove with patient Explain significance of pf ergonomic design produet omor manuais ara kaet nn P product owner manuals are kept I understand how to use the equipment and all of my questions have been answered If have any questions prior to use of transfer device will consult the owner user manual for the QuickMove Stand Aid Name Title Signature SystemRoMedic Evaluator Signature Date 3 27 13 l OneWaySlide Sliding Mat handicare Clinical Guidelines for Use Competency Statement After attending this orientation the clinician will be able to properly use specialty equipment according to manufacturer s recommendations If the performance criteria are not met additional training will be provided If the caregiver has any questions always consult the product owner manual prior to use or contact your Handicar
10. to follow pf directions 3 Patient is not combative or agitated ee Operation of ReTurn 7500 Stand Aid 330 Ibs max ee ee es 1 Position ReTurn 7500 at bed or chair with foot plate directly in front of patient 2 Adjust shin bolster just below knee to allow the patient s a knees to bend 3 Place ReTurn Belt around patient s waist with lower portin of belt supporting buttocks Adjust belt to fit snug around patient and clip buckle 4 Instruct patient to grasp ReTurn 7500 bar directly in front and pull themself up to a standing position Adjust safety strap around vertical bar and clip buckle Tension in strap should prevent excessive side to side movement bedtochatchabtocharorchaitotolet fT bed to chair chair to chair or chair to toilet mobityofpatontatbedsie fT mobility of patient at bedside 7 The ReTurn 7500 should only be used to transfer patients short distances Use caution when transfer requires a move through door thresholds B e e TT chair bed commode toilet Retun7soewthpaien o ooo ReTurn 7500 with patient podtomernanasaekgpt P product owner manuals are kept understand how to use the equipment and all of my questions have been answered If have any questions prior to use of transfer device will consult the owner user manual for the ReTurn 7500 Stand Aid Name Title Signature SystemRoMedic 3 27 13 Evaluator Signature Date handicare Rena 600 Sit to Stand Lift Compet
11. you a ae intend to transfer the patient Receiving Surface 6 Fold the Slide Sheet in half vertically and place the ReadySheet underneath of the patient as far as possible Next log roll the patient to the opposite side and pull the folded slide sheet so that it is completely under the patient Log roll the patient back to a supine position to prepare for the transfer 8 The nurse on the side of the receiving surface should lift slightly and pull at the same time that the nurse on the side of the transferring surface closest to the patient lifts slightly and guides the patient onto the intended surface 9 With ReadySheet positioned under patient a nurse caregiver should be positioned on each side of the bed The nurse caregiver should grasp handles on the ReadySheet and together slide the patient up in bed 10 Once task is completed the ReadySheet should be removed by log rolling patient to one side and fold ReadySheet under patient as far as possible Log roll patient to opposite side and remove ReadySheet 11 It is important at all times to protect the patients head and neck as well as assure that the patient s feet transfer freely If you are transferring larger patients it may require three caregivers to safely transfer the patient 12 Once the patient is transferred or repositioned raise the side rails and head of bed or stretcher as needed understand how to use the equipment and all of my questions
12. D handi EasySlide and RollerSlide XY qnaicare Transfer Devices Competency Assessment Competency Statement After attending this orientation the clinician will be able to properly use specialty equipment according to manufacturer s recommendations If the performance criteria are not met additional training will be provided If the caregiver has any questions always consult the product owner manual prior to use or contact your Handicare Representative Objective Caregiver will be able to choose the correct transfer device and demonstrate competency by safely transferring the patient from stretcher to bed or bed to stretcher Directions Check the appropriate box for each performance criteria Schedule retraining as indicated ALWAYS EXPLAIN PROCEDURE TO RESIDENT OR PATIENT BEFORE AND Ser TASK Transferring a patient from stretcher to bed or bed to stretcher is a two person task unless otherwise stated in your facility policy and procedure for transfer devices If the patient is overweight or has tubes or drains an additional caregiver may be required to protect the tubes and lines 2 When transferring a patient from bed to stretcher or stretcher to bed make certain that the head of the bed and stretcher are in a flat position and the receiving surface is slightly lower than the transferring surface The height of the bed and stretcher should be at a safe working height and must allow the caregiver to transfer the patient without
13. Stand Assist Lift Competency Assessment Competency Statement After attending this orientation the clinician will be able to properly use specialty equipment according to manufacturer s recommendations If the performance criteria are not met additional training will be provided If the caregiver has any questions always consult the product owner manual prior to use or contact your Handicare Representative Directions Check the appropriate box for each performance criteria Schedule retraining as indicated ALWAYS EXPLAIN PROCEDURE TO RESIDENT OR bahia Performed Needs PATIENT BEFORE AND DURING TASK ait review Describe and demonstrate equipment features Safety checks e Person weight being lifted appropriate for lift limits e Shin bolster centered and shin strap secure e Sling free of defects tears or fraying of loops Operation of Mini 200 Stand Assist Lift 440lbs max 1 Select appropriate sling and place around patient rr ee rr a 2 Position lift at bed or chair using leg spreader button as E meegog eerste smo aa preadorbatonas I j 3 Extend sling bar toward patient prior to attaching sling Once sling is attached take up any slack by retracting sling bar away from patient ae ee rr ee rr ee ee rr ee ee rs es Sling Attachment Attach sling to sling bar Use the same colored loop on the patient s left side as the patient s right side Demonstrate use and rationale for slide bar when connecting Thorax Sling 9 Battery
14. ck of the chair There are three sets of loop straps on each side of the OneWaySlide The lowest set of loops should be low where the seat meets the back rest This will provide the caregiver with enough loops to reposition the patient several times without repositioning the OneWaySlide Repositioning patient up in Chair or Wheelchair To reposition a patient up in a chair or wheelchair who has slide down over time and is now in an uncomfortable unsafe posture please follow these steps Place a SystemRoMedic FootStool or device under the patient s feet to elevate thighs and eliminate friction points Stand behind chair or wheelchair and grasp the lowest sets of loops on both sides of the OneWaySlide while bending your knees to maintain proper body alignment Pull up on loops and patient will effortlessly slide up in the chair and the one way material of the OneWaySlide will retard movement down If the patient is heavy and places the caregiver at risk if manually repositioned then an Eva floor lift or equivalent can be used by placing loops in spreader bar one on each side The lift can be raised and the patient will be repositioned up in the chair or wheelchair The FootStool can remain under the patient s feet I understand how to use the equipment and all of my questions have been answered If have any questions prior to use of the transfer device I will consult the owner user manual for the OneWaySlide Name Title
15. e Representative Objective Caregiver will be able to choose the correct devices and demonstrate competency by using correct procedure to safely reposition a patient up in chair or wheelchair Directions Check the appropriate box for each performance criteria Schedule retraining as indicated ALWAYS EXPLAIN PROCEDURE TO RESIDENT OR PATIENT BEFORE AND DURING Verbalized Performed Needs TASK understanding review Product description The OneWaySlide is used to improve the sitting positions of a patient in a chair or wheelchair The OneWaySlide is an ultra low friction device that allows sliding to reposition up in a chair or wheelchair and inhibits sliding in the opposite direction that causes uncomfortable and unsafe body posture The OneWaySlide comes in two sizes and supports a maximum weight of 330 Ibs and 440 See product manual for cleaning instructions Functional inspection a Always check assistive device after laundering and regularly to insure that the product is not worn damaged or bleached b Pull on handles to assure they can withstand a heavy load and if there are signs of wear the product should be discarded Placement of OneWaySlide The OneWaySlide should be left under the patient at all times when seated in a chair or wheelchair Fasten the OneWaySlide to the back of the wheelchair or chair using the tie straps The OneWaySlide label should be facing up with the arrow pointing toward the ba
16. egiver has any questions always consult the product owner manual prior to use or contact your Handicare Representative Directions Check the appropriate box for each performance criteria Schedule retraining as indicated ALWAYS EXPLAIN PROCEDURE TO RESIDENT OR PATIENT BEFORE AND Verbalized Performed Needs review DURING TASK understanding Describe and demonstrate equipment features rr ee e Patient weight being appropriate for product limits e Patient meets phyiscal and cognitive guidelines Patient physical and cognitive guidelines oo o y o 1 The RoWalker is used for rehabilitation through progessive mobility as well as promoting early mobilization specifically for cardio thoracic and abdominal post surgical patients 2 Patient able to support weight and maintain balance while standing and has appropriate upper body strength to actively paticipate in standing position 3 Patient is aware of surrounding and able to follow directions i a ae 4 Patient is not combative or agitated ee es ee Operation of RoWalker Ambulation Aid 400 Ibs max a a S 1 Place ReTurnBelt around patient s waist with lower portion of belt supporting buttocks Adjust belt to fit snug around patient and clip buckle Make sure the handles on the ReTurnBelt are aligned on the side so the caregiver can grasp if necessary to guide and aid in stability 2 Position RoWalker at bed or chair as close to the patient as possible Adjust the base width by u
17. ency Assessment Competency Statement After attending this orientation the clinician will be able to properly use specialty equipment according to manufacturers recommendations If the performance criteria are not met additional training will be provided If the caregiver has any questions always consult the product owner manual prior to use or contact your Handicare Representative Directions Check the appropriate box for each performance criteria Schedule retraining as indicated ALWAYS EXPLAIN PROCEDURE TO RESIDENT OR Verbalized Performed Needs PATIENT BEFORE AND DURING TASK e aag ii Describe and demonstrate equipment features a Safety checks e Patients MUST have the ability to bear weight e Person weight being lifted appropriate for lift limits e Shin bolster centered and shin strap secure e Sling free of defects tears or fraying of loops e Lift will not operate when plugged into wall for charging operation of Rena 600 Stand Assist Lift 600lbs max OOOO o o o Select appropriate 1 Select appropriate sling and place around patient and place around patient 1 Select appropriate sling and place around patient 2 Position Rena stand assist lift at bed or chair using leg spreader button as needed Sling Attachment Attach sling to sling bar Use the same colored loop on the patient s left side as the patient s right side Demonstrate use and rationale for slide bar when connecting StandUP Sling Note Certain ga
18. ferring from bed to wheelchair bed to gurney or location that has a gap to bridge Using a pair of EasyGlide can is effective in reducing the strain while applying slings for patients of any size and in any position 2 Functional inspection a Carefully bend the EasyGlide to check strength and durability 3 Placement of EasyGlide for sling application a The EasyGlide can be used to apply slings in a supine or seated position By using two EasyGlides a channel is created to slide the sling between to eliminate friction and facilitate sling placement When apply a sling for someone in a supine position who is on a floor such as linoleum or tile you will require only one EasyGlide Seated Sling Application When applying a sling on someone in a chair wheelchair car seat or any other seated position please follow the following steps Place two EasyGlides sliding boards together and hold handle Insert the pair of EasyGlides in the small of the back of the patient Rotate the EasyGlide sliding boards toward the head of the patient until they are aligned with the spine Insert the lifting sling between the EasyGlide sliding boards and pull on both sides of the lifting sling until the bottom of the back of the sling reaches the tailbone of the patient Remove the EasyGlide sliding boards and apply the leg straps Recumbent Sling Application When apply a sling to someone in a recumbent position in a bed or who has fal
19. g the scale is hanging vertically and is free to pivot 10 Carefully lift the patient When the motion has stabilized press the Weigh button to display the weight data Do not touch the patient or sling during this step 11 Carefully lower patient when weighing process is complete understand how to use the digital scale and all of my questions have been answered If have any questions prior to use will consult the owner user manual for the digital scale product Name Evaluator Signature Date Title Signature SystemRoMledic 3 27 13 H handicare RISE 450 and 625 Manual Traverse Ceiling Lift Competency Assessment Competency Statement After attending this orientation the clinician will be able to properly use specialty equipment according to manufacturer s recommendations If the performance criteria are not met additional training will be provided If the caregiver has any questions always consult the product owner manual prior to use or contact your Handicare Representative Directions Check the appropriate box for each performance criteria Schedule retraining as indicated Describe and demonstrate equipment features Verbalized Performed Needs review understanding Safety checks Battery charge adequate for task Only lift patient off surface high enough to complete task Never lift patient over bed side rails Sling free of defects tears or fraying of loops Operation of RISE 450 and 625 Ma
20. have been answered If have any questions prior to use of lift will consult the owner user manual for the ReadySheet Slide sheet Name Title Signature SystemRoMedic Evaluator Signature Date 3 27 13 handicare QuickMove Stand Aid Competency Assessment Competency Statement After attending this orientation the clinician will be able to properly use specialty equipment according to manufacturers recommendations If the performance criteria are not met additional training will be provided If the caregiver has any questions always consult the product owner manual prior to use or contact your Handicare Representative Directions Check the appropriate box for each performance criteria Schedule retraining as indicated ALWAYS EXPLAIN PROCEDURE TO RESIDENT OR Verbalized Performed Needs PATIENT BEFORE AND DURING TASK Aog EEU Describe and demonstrate equipment features Safety checks e Patient weight being appropriate for product limits e Shin bolster centered and feet on foot plate e Patient meets phyiscal and cognitive guidelines Patient physical and cognitive guidelines re 1 Patient able to weightbear and has appropriate upper bodpetength is acivelypatcvaisinctanding poston en directions ee Operation of QuickMove Stand Aid 374 Ibs max 1 Position QuickMove at bed or chair using leg spreader open and close base prior to placing patient s feet on foot plate 2 Adjust shin bolster just below knee
21. len on the floor please follow the following steps Insert a pair of EasyGlide sliding boards perpendicular to the spine of the in the small of the back of the patient Rotate the EasyGlide sliding boards toward the head of the patient until they are aligned with the spine Insert the sling between the EasyGlide sliding boards and pull on both sides of the lifting sling until the bottom of the back of the sling reaches the tail bone of the patient Remove the EasyGlide sliding boards Positioning Sheet Application Use the steps above for a Recumbent Sling Application Use the steps above for a Recumbent Sling Application Insert the folded positioning sheet between the EasyGlide sliding boards and pull on both sides of the lifting sling until the bottom of the back of the sling reaches the tail bone of the patient Fold out the positioning sheet by pulling both sides of the sheet under the legs of the patient until the bottom of the sheet reaches the end of the bed and remove the EasyGlide sliding boards I understand how to use the equipment and all of my questions have been answered If have any questions prior to use ol the transfer device I will consult the owner user manual for the EasyGlide Sling Application Name Title Signature SystemRoMedic Evaluator Signature Date
22. loor D aak fT patient heute e user manual skepton J OO OOOO the unit If attaching a seated sling or limb sling the sling bar will be parallel with the patient s shoulders Repositioning sling types should be connected with the sling bar perpendicular to the patient s shoulders I understand how to use the equipment and all of my questions have been answered If have any questions prior to use of lift will consult the owner user manual for the EVA floor lift product Name Title Signature SystemRolledic Evaluator Signature Date 3 27 13 RY handicare EasyGlide Slide Board Clinical Guidelines for Sling Application Competency Statement After attending this orientation the clinician will be able to properly use specialty equipment according to manufacturer s recommendations If the performance criteria are not met additional training will be provided If the caregiver has any questions always consult the product owner manual prior to use or contact your Handicare Representative Objective Caregiver will be able to demonstrate competency by using correct procedure to safely apply a sling using the EasyGlide Ovals Directions Check the appropriate box for each performance criteria Schedule retraining as indicated ALWAYS EXPLAIN PROCEDURE TO RESIDENT OR PATIENT Verbalized Performed Needs understanding review Product description a The EasyGlide is a thin flexible slide board used to bridge gaps when trans
23. ns an additional caregiver may be required to protect the tubes and lines 4 Place the TurnTable on the floor beside the patient Secure the TurnTable in place before raising the patient by placing the ball of your foot on the TurnTable and your heel on the floor e menee nn pushing win Pe ont of your tener f J O o the heel 6 When the patient is in position to sit down secure the TurnTable in place before raising the patient by placing the ball of your foot on the TurnTable o and your heel on the floor C minimize meranstaraetanea ee fT minimize the transfer distance 8 Pull the patients pants up down when the patient has risen slightly from the seat Preferably two caregivers should assist with this task 9 For added security use a FlexiBelt EasyBelt a a ae 10 Care of product clean surface using facility approved disinfectant ee understand how to use the equipment and all of my questions have been answered If have any questions prior to use of the transfer device will consult the owner user manual for the TurnTable Name Title Signature Evaluator Signature Date systemRoMedic 3 26 13 X handicare RoWalker 400 Ambulation Aid Competency Assessment Competency Statement After attending this orientation the clinician will be able to properly use specialty equipment according to manufacturer s recommendations If the performance criteria are not met additional training will be provided If the car
24. nual Traverse ee ee 1 Identify lift capacity is within limits for patient a a ee Sling selection and application competency Highback sling Limb strap Repositioning 3 Select appropriate sling for task and position under patient a ee Press down button on hand control to lower sling bar to attach sling a ee ee Move lift to receiving surface and center lift over bed or chair using hand control for auto traverse or pull by hand for manual placement Attach sling to sling bar Use the same colored loop on the patient s left side as the patient s right side Select shorter shoulder loops and longer leg loops for upright seating Select longer shoulder loops and shorter leg loops for more reclined seating Pf Press up button on lift or hand control to raise patient off surface or to reposition patient in bed ae Press down button on lift or hand control to lower patient in place to complete ak and L remove ore om sling o 9 Unhook sling from sling bar verbalize metho 0 f oo o y Battery Locate and aed display ea emergency stop switch ae a E Locate and ale Recap ondioperatcemoneny om emergency down He ar NN TORT TOT 13 Demonstrate proper body mechanics when moving lift with patient ee ee 14 Caregiver can verbalize as to where the user manual is kept on the unit a ee ae If attaching a seated sling or limb sling the sling bar will be parallel with the patient s shoulders Repositioning sling types
25. presentative Directions Check the appropriate box for each performance criteria Schedule retraining as indicated Describe and demonstrate equipment features understanding Safety checks Mast and boom secure All nuts and bolts secure Sling free of defects tears or fraying of loops Operation of EVA 450 and 600 Mobile Lift Sef 1 Identify lift capacity is within limits for patient Position lift around bed or chair using leg spreader button as ee 3 Sling selection and application competency e Highback Sling e Limb Sling e Repostiioning 4 Select appropriate sling and position under patient ee ee ee 5 Attach sling to sling bar Use the same colored loop on the patient s left side as the patient s right side Select shorter shoulder loops and longer leg loops for upright seating Select longer shoulder loops and shorter leg loops for more reclined seating 6 Ensure wheels are UNLOCKED Explain rationale Jo o o y yY oO 7 Press up button on lift or hand control oS o S S o 8 Move lift to receiving surface and center patient lo o o o To S y yY oO 9 Press down button on lift or hand control 10 Unhook sling from sling bar verbalize method 11 Battery Locate and remove operate red on off switch verbalize understanding of charging 12 12 Locate and operate emergency down _ sSY and 12 Locate and operate emergency down _ sSY emergency down a a bed f
26. r attending this orientation the clinician will be able to properly use specialty equipment according to manufacturer s recommendations If the performance criteria are not met additional training will be provided If the caregiver has any questions always consult the product owner manual prior to use or contact your Handicare Representative Objective Caregiver will be able to choose the correct pivot transfer device and demonstrate competency by safely transferring the patient from a seated position between wheelchair and bed toilet or chair For increase security the turntable can be used with a FlexiBelt EasyBelt Directions Check the appropriate box for each performance criteria Schedule retraining as indicated ALWAYS EXPLAIN PROCEDURE TO RESIDENT OR PATIENT BEFORE AND DURING TASK To transfer using the TurnTable the patient must be able to a Support weight while standing b Stand up and maintain balance with support c Understand instructions 2 Functional inspection a Check the condition and function of the product regularly b Check to insure that the product is not worn damaged or bleached c If there are signs of wear the product should be discarded 3 Transferring a patient using the TurnTable from a seated position between wheelchair and bed toilet or chair can be performed by one person unless otherwise stated in your facility policy and procedure for transfer devices If the patient is overweight or has tubes or drai
27. rments may cause sling to slide up back 3 Ensure wheels are UNLOCKED Explain rationale a 4 Press up button on lift hand control to lift patient Only lift patient high enough to accomplish transfer or in a comfortable position for patient If lift does not work check that Red power button below battery is in the out position by pushing in and turning clockwise 5 Move lift to receiving surface and center patient i i ae 6 Press down button on lift hand control a 7 Unhook sling from sling bar verbalize method OOS O ee vervaizo understanding ofenerang P verbalize Peo of charging 9 Locate and operate 2 locations for emergency down o Jo o o aere e S from chair bed commode toilet 11 Demonstrate proper body mechanics when moving lift with patient Do not move lift by boom sling attachments pf hooks ductomormanualsarskepte product owner manuals are kept I understand how to use the equipment and all of my questions have been answered If have any questions prior to use of lift will consult the user manual for the Rena 600 Sit to Stand Lift Name Title Signature SystemRoMedic Evaluator Signature Date 3 26 13 ReadySheet Slide Sheet H handicare Competency Assessment Competency Statement After attending this orientation the clinician will be able to properly use specialty equipment according to manufacturer s recommendations If the performance criteria are not met
28. should be connected with the sling bar perpendicular to the patient s shoulders understand how to use the equipment and all of my questions have been answered If have any questions prior to use of lift will consult the owner user manual for the RISE Ceiling lift product Name Title Signature SystemRoMedic Evaluator signature Date 3 26 13 H handicare ReTurn 7500 Stand Aid Competency Assessment Competency Statement After attending this orientation the clinician will be able to properly use specialty equipment according to manufacturers recommendations If the performance criteria are not met additional training will be provided If the caregiver has any questions always consult the product owner manual prior to use or contact your Handicare Representative Directions Check the appropriate box for each performance criteria Schedule retraining as indicated ALWAYS EXPLAIN PROCEDURE TO RESIDENT OR e aen Performed Needs PATIENT BEFORE AND DURING TASK a ai Describe and demonstrate equipment features Safety checks Person weight being appropriate for product limits Shin bolster centered and feet on foot plate Patient meets phyiscal and cognitive guidelines The caregiver must always apply counter pressure when the patient is standing up sitting down and during the actual transfer Only use on flat surfaces Patient physical and cognitive guidelines standing position 2 Patient is aware of surrounding and able
29. sing the foot pedal at the front to position around chairs and other obstacles as needed 4 Open and adjust seat swing pads prior to patient standing Assist patient to step forward into RoWalker and grasp handles of RoWalker Close seat swing pads once patient is standing for safety and sitting if necessary Caregivers should support as needed using the handles on the ReTurnBelt 5 Locate the lever on the right of the handlebar and the two locking handles on both sides of the RoWalker Adjust height of arm rests once patient is standing by using the lever on the handlebar Lock the arm rests in place by using the two locking handles 6 Unlock front brakes once patient is secure and is ready to walk or stand Locate the lever above the back wheels and press down to lock steering into a straight direction a a a a on front support bars 8 Observe and verbalize understanding of seated transfer from chair and bed 9 Demonstrate proper body mechanics when moving RoWalker with patient Serinapres oan mecimme err mea R S alien owner manas J O OO are kept understand how to use the equipment and all of my questions have been answered If have any questions prior to use of transfer device will consult the owner user manual for the RoWalker Ambulation Aid Name Title Signature Evaluator Signature Date SystemRoMedcc QS Nandicare Digital Scale Competency Assessment Competency Statement After attending
Download Pdf Manuals
Related Search
Related Contents
User Manual Targus CUCT02UA15EU Door Station User`s Manual 広報 - 善通寺市 QUALITÀ QUALITY QUALITÉ CALIDAD QUALITÄT l`utilisation et Comité directeur du 10 septembre 2015 MANUAL DE I N S T R U C C I O N E S - TA Triumph Copyright © All rights reserved.
Failed to retrieve file