Manual SF1 10x10W WW (english)
Contents
1. 8 6 11 LED PCB Temperatures Ea a a ag iiss Sa hn se ke 8 Update AMS SOWA ceria a a AA a a 9 6 135 9 7 DMX Charts and Modes NEARE ARA TANAR NEKE AA 9 8 kechnicaldala 9 2 10 EHRGEIZ SHOWTIME FACE WW 1 Safety instructions e This device is suitable for indoor use only e All modifications to the device will void the warranty e Repairs are to carry out by skilled personnel only e Use only fuses of the same type and original parts as spare parts e Protect the unit from rain and humidity to avoid fire and electric shocks e Make sure to unplug the power supply before opening the housing 1 1 FOR SAFE AND EFFICIENT OPERATION Be careful with heat and extreme temperature Avoid exposing it to direct rays of the sun or near a heating appliance Not put it in a temperature bellow 32 F 0 C or exceeding 131 F 55 C Keep away from humidity water and dust Do not place the set in a location with high humidity or lots of dust Containers with water should not be placed on the set Keep away from sources of hum and noise Such as transformer motor tuner TV set and amplifier To avoid placing on un stable location Select a level and stable location to avoid vibration Do not use chemicals or volatile liquids for cleaning Use a clean dr2. DMX Charts and Modes Mode 1 SL1 2 Channel 1 0 255 Master dimmer 0 100 Mode 2 SL2 3 Channel 1 0 255 Master dimmer 0 100 Channel 2 to has to be on Value 1 0 7 LED shutter 3 8 59 60 89 Ramp down gt 90 Ramp up Ramp down s Technical data Power consumption 110W ess Cooling Convection cooled Housing material pati Measures 260 x 213 x 61mm Weight BRR Light source 10 x 1OW WW LEDs 9 10 EHRGEIZ SHOWTIME FACE WW Importer B amp K Braun GmbH Industriestra e 2 D 76307 Karlsbad lttersbach www bkbraun com info bkbraun com RoHS 10 10
3. ACE WW To unlock the keys just press UP and DOWN at a time for minimum 3s 6 8 Master Slave on or off MASTER ON Here you can decide if you want the item to be the master You should know that if the master is activated this items send DMX signal to the slaves so make sure that you are not using the master function in a working DMX line controlled by a console You can decide between ON Sends master signal OFF don t sends master signal Choose the required option with the UP DOWN button and confirm with ENTER 6 9 Setup the dimming Curve SETUPCUR LINE Here you can decide which dimming curve and dimming behavior you want to use You can decide between LINE This setup is a liner dimmer curve OPTIMIZE This curve is an optimized curve for white values Choose the required option with the UP DOWN button and confirm with ENTER 6 10 Version VERSION 11 120 02M Here you can see the actual software version number 6 11 LED PCB Temperature LED PCB TEMP xxx Here you can see the actual temperature of the PCB module 8 10 EHRGEIZ SHOWTIME FACE WW 6 12 Update the software Please press UP or DOWN for a longer time to update the software of your par can with the dedicated updater 6 13 Reset Please Press ENTER to reset all functions to factory presets 7
4. EHRGEIZ USER MANUAL Showtime Face WW EHRGEIZ SHOWTIME FACE WW Table of contents 1 SISS Ra a ee E 3 1 1 FOR SAFE AND EFFICIENT OPERATION 000 0000 eaten 3 25 Aao ELi O a A AT 4 83 Bront wiew of the Dase A Ek 4 4 Reafiviewofithe base a a a RA Ra KRR GA UR Aa pa 5 5 1 5 6 6 6 1 Progra F RER ERE 6 6 2 evpaladewesinegeathecnedeeculiderteieeesizecceeielnetevas elena 6 6 3 ee eave 6 6 4 Master A 7 6 5 DMX Siona enaar pdre rn a arfa Sst ad 7 6 6 Setup Display strn aa Aa ee ed anne 7 6 7 SR 7 6 8 Master Slave enna a ga 8 6 9 Setup the dimming arnar 8 210s MOPSIOM A gods
5. M In this menu you can setup the color for the stand alone mode But be careful your set up of the color adjusts at the same time the maximum value for the DMX control So if you set a color down to 80 then this is the output value for 100 by DMX Setup the Master dimmer from 0 100 by using the UP DOWN Buttons Confirm with ENTER 6 5 DMX Signal DMX SIGN FREEZE Here you can decide what shall happen when the DMX signal fails You can select between FREEZE Keeps the last value BLACKOUT When the DMX fails the par can starts the blackout mode Choose the required option with the UP DOWN button and confirm with ENTER 6 6 Setup Display SETUPDIS ON Here you can decide what shall happen with the display You can select between ON LCD stays on always OFF LCD shuts down after 8s when no button is pressed Choose the required option with the UP DOWN button and confirm with ENTER 6 7 Key Lock KEY LOCK 305 you can decide if you want to lock the keys and how you want them to react then You select between 105 after 25 of doing no interaction the keys lock themselves 30s after 5s of doing no interaction the keys lock themselves OFF the keys never lock Choose the required option with the UP DOWN button and confirm with ENTER 7 10 EHRGEIZ SHOWTIME F
6. d just install a new face Even for rental this is useful that you can assemble the Par Can according to the user s choice So be creative with the achieved possibilities 3 Front view of the base Screw for fixing the bracket Holding bracket Power lock Connector for Face Holder for Face 4 10 EHRGEIZ SHOWTIME FACE WW 4 Rear view of the base Menu Display Buttons ENTER UP DOWN MENU DMX XLR In Out 3pole Powercon In 5 Installing the face on the base The led part has to look in our direction Make sure that the backside of the base looks also in your direction Now the connector should be at the lower right side the face side as well There is now only one fitting point to push these two parts together After you did that please push and turn the two quick locks at the face Make sure that the face is now connected well to the base Now the menu should show up the text according to the chosen face mounted 5 10 EHRGEIZ SHOWTIME FACE WW 6 Menu description 6 1 Program PROGRAM P 01S 01 Here you can chose which internal program you want to start in the automatic mode Push Enter to make the first Value behind the letter P blinking With the UP DOWN buttons you can change the value from 1 4 1 4 are different programs Push ENTER again to confirm the value and jump to the letter S which stands for speed In
7. the same way you can change now the speed from 0 31 0 means stop 1 is the maximum and 31 minimum speed Push MENU to leave this menu Then use the UP DOWN Buttons to go on through the next menus 6 2 Coolmode COOLMODE POWER Here you can set up how the cooling should be made There are three different modes Please push ENTER to access the menu and use UP DOWN buttons to choose one of the following modes POWER The device will be set up to a maximum dimmer value of 100 The fan runs continuously If the temperature exceeds 70 the LEDS will be dimmed down STUDIO The device is set to a maximum dimmer value from 60 The fan starts up when the device temperature exceeds 70 Additional the LEDs will be dimmed down to help the device cooling itself REGULATE The device will be set up to a maximum dimmer value of 100 The fan starts when the temperature exceeds 49 C When the temperature exceeds 60 C the LEDs will be dimmed down 6 3 DMX Setup DMXSETUP 1 011 you can setup your required DMX Mode and the required start address stands for mode Here you can choose between 1 2 and SLAVE stands for address Here you can setup the DMX start address from 1 512 With UP DOWN you can choose the setting you want Confirm with ENTER 6 10 EHRGEIZ SHOWTIME FACE WW 6 4 Master Dimmer SETUPDIM 080 DI
8. y cloth to wipe off the dust or a wet soft cloth for stubborn dirt If out of work contact sales agency immediately Any troubles arose remove the power plug soon and contact with an engineer for repairing do not open the cabinet by yourself it might result a danger of electric shock Take care with the power cable Never pull the power cable to remove the plug from the receptacle be sure to hold the plug When not using the device for an extended period of time be sure to disconnect the plug from the receptacle 3 10 EHRGEIZ 0 SHOWTIME FACE WW Important Damages caused by the disregard of this user manual are not subject to warranty The dealer will not accept liability for any resulting defects or problems Make sure the electrical connection is carried out by qualified personnel All electrical and mechanical connections have to be carried out according to the European safety standards 2 Introduction The Showtime Face is the changing part of the Showtime Series It be installed and exchanged on top of the base You can install the different faces as described in this manual You should know that the base cannot do anything without the corresponding face The complete intelligence and menus are installed in the face part The base is just equipped with a PSU the Display and the corresponding electronics The idea is the possibility to change the faces to create a maximum multifunction by leaving the base installed an
Download Pdf Manuals
Related Search