eBDS - Haemonetics
Contents
1. sampling stand measure percent O E than the acceptable limit and the unit Sample Set tubing A if the liquid level is over the first line agitation is across the long axis of the Remove probe and press green start may be contaminated with bacteria It and under filled if liquid level is sample pouch C enter button to confirm baseline is recommended that the sample pouch below the second line and or product be cultured to confirm Middle pouch is filled correctly NOTE Platelets in the tubing may be results before discarding joo t t recovered by stripping contents back into platelet bag eBDS Technologically Enhanced to Make Bacteria Detection Simple and Effective Refer to the eBDS Sample Set package insert and eBDS User Manual for detailed instructions for use For technical support contact the Customer Care Hotline at 800 537 2802 Scanner Enter Start Key Soft Keys Sterile Dockable Tubing Display Tablets with SPS and TSB Visit us at www haemonetics com Sample Probe Holder for Sample Filling Lines d fs Probe E y Protected Haemonetics Corporation sample Gas Inlet Sampling Site a 406 Wood Road rs cae Xue P Braintree MA 02184 er ited Stat Ags Labeling Tab o 800 225 5242 Fixed Keys RX Onl eBDS Oxygen Analyzer eBDS Sample Set l ES pam C 2012 2013 Haemonetics Corporation Haemonetics Haemonetics The Blood Management Company and eBDS are trademar2. eBDS The Total Solution for Detecting Bacteria in Platelets 6 Steps to Bacteria Detection Platelet Sampling _ Bacteria Detection 1 Sample Set and 2 Sample Collection 3 Sealing and Storage 4 Analyzer and 5 O Measurement 6 Readings Platelet Unit Preparation Pouch Preparation Clamp tubing below check valve Suspend platelet bag above sample Clamp tubing Scan barcode information as prompted D Insert probe of the eBDS Oxygen PASS The test did not detect bacterial Strip tubing and gently mix platelet unit pouch ensuring fill lines are horizontal Seal tubing on both sides of check valve Confirm eBDS Oxygen Analyzer is ready Analyzer through the sampling site contamination and indicates the Ensure tubing is completely filled with a Open clamp detach and discard to measure sample septum and protective membrane into sample is NEGATIVE at the time of 0 well mixed representative platelet sample Fill pouch until fluid level is at or Place sample pouch on agitator insidea With label tab facing away from eBDS the headspace air of the sample pouch measurement Sterile connect Sample Set to platelet between the lines B 35 C incubator Oxygen Analyzer slide neck of sampling Press green start enter button to FAIL Indicates that the percent 0 is less unit maintaining maximum length of The pouch is considered over filled Orient the sample pouch so that site into oxygen
3. ks or registered H AEMONE I S trademarks of Haemonetics Corporation in the USA other countries or both fs All rights reserved 02 2013 USA COL COPY 000527 AB THE Blood Management Company
Download Pdf Manuals
Related Search