PEC Updater user manual
Contents
1. 204 233 3252 Web site www phason ca 2 2010 03 192. Phason PEC Updater user manual PEC Updater user manual The PEC Updater is an innovative and easy to use product that allows you to upgrade your PEC s firmware Phason constantly improves and adds new features to their products With the PEC Updater you can upgrade the firmware in your PEC as these features become available The PEC Updater takes only seconds to use and can upgrade all the PEC controls at your site Features Quick and easy to use Compact design fits in a pocket 90 day limited warranty Updating the firmware There are two methods for updating the PEC firmware power on and power off Power on the power on method allows you to update the PEC firmware using the menu system without having to switch the incoming power off and then on If the power on method fails use the power off method Power off the power off method allows you to update the PEC firmware by switching the incoming power off and then on Use the power off method if the power on method fails The inside of the PEC cover is where you connect the PEC Updater The cover label must face the right when you plug the updater into the socket s here on m a 31047500 1 PEC Updater user manual Phason To update the firmware using the power on method 1 Loosen the four screws in the PEC enclosure and then gently remove the cover Make sure not to disconnect the ribbon cable 2 Insert the PEC Updater in
3. to the connector marked SAVER on the inside top left of the cover 3 Press Program until COMF displays and then press Select The display shows C4 the first item in the Configuration menu 4 Press Down until 37 displays and then press Select 5 Press Up or Down to change the na to YE5 and then press Select The PEC updates its firmware During the update the display is blank and the control beeps When the update is complete the display shows for a couple seconds and then shows the ambient temperature 6 Remove the PEC Updater 7 Verify that the control functions properly 8 Replace the cover and then tighten the four screws To update the firmware using the power off method 1 Loosen the four screws in the PEC enclosure and then gently remove the cover Make sure not to disconnect the ribbon cable 2 Insert the PEC Updater into the connector marked SAVER on the inside top left of the cover Switch off the power to the PEC for at least five seconds 4 Switch on the power to the PEC The PEC updates its firmware During the update the display is blank and the control beeps When the update is complete the display shows for a couple seconds and then shows the ambient temperature 5 Remove the PEC Updater 6 Verify that the control functions properly 7 Replace the cover and then tighten the four screws Phason Inc 2 Terracon Place Winnipeg Manitoba Canada Phone 204 233 1400 E mail support phason ca R2J 4G7 Fax
Download Pdf Manuals
Related Search