Home

Authentication Settings - D-Link

1. DAP 2360 Help 23 Section 3 Configuration Open System Shared Key Authentication Encryption Use the radio button to disable or enable encryption D Link DAP 2360 Home Maintenance Configuration Logout M Help Key Type Select HEX or ASCII 2 DAP 2360 E f Basic Settings A B Wireless Key Size Select 64 Bits or 128 Bits B an ire Advanced Settings 2 LE Network Name SSID Key Index 1 4 Select the 1st through the 4th key tobe the amp ai a active key Bwmsso i B van Auto Channel Selection B Intrusion Channel Key Input up to four keys for encryption You sees a will select one of these keys inthe Key Index B ARP spoofing Prevention a tne nncation B Bandwidth Optimization drop down menu 88 se tay Key Settings 8 Captive Portal Encryption 9 f DHCP Server Key Type Filters Traffic Control ne status Network Key Confirm Key 0 9 a z A Z M 8 amp _ 07 L lt gt Hexadecimal HEX digits consist of the numbers 0 9 and the letters A F ASCII American Standard Code for Information Interchange is a code that represents English letters using numbers ranging from 0 127 D Link DAP 2360 User Manual 24 Section 3 Configuration WPA WPA2 Personal Authentication WPA Mode When WPA Personal is selected for Authentication type you must also select a W
2. Basic Settings amp f Advanced Settings B Performance B Wireless Resource B Multi SSID 3 VLAN B Intrusion B Schedule B Internal RADIUS Server AP Array i Captive Portal Gf DHCP Server i Dynamic Pool Settings B Static Pool Settings Current IP Mapping List f Fiters Traffic Control status Maintenance v Configuration v Logout DAP 2360 Help DHCP Server Control Function Enable Disable Dynamic Pool Settings IP Assigned From The Range of Pool 1 254 Subnet Mask Disable v 192 168 0 20 235 255 255 255 0 dlink ap Lease Time 60 31536000 sec 604800 75 Section 3 Configuration Log Server IP Address Log Type Email Notification Outgoing Mail Server SMTP Authentication SSL TLS From Email Address To Email Address Email Server Address SMTP Port Username Password Confirm Password Schedule Log Settings Enter the IP address of the server you would like to send the DAP 2360 log to Check the box for the type of activity you want to log There are three types System Activity Wireless Activity and Notice Check to enable Email notification Select the SMTP server from the drop down menu Check to enable authentication Check to enable SSL TLS authentication Enter the From email address En
3. E H Advanced Settings iB Performance B Wireless Resource B Multi SSID B VLAN Intrusion Schedule Internal RADIUS Server B ARP Spoofing Prevention B Bandwidth Optimization B p AP Array E S Captive Portal E DHCP Server Fitters Traffic Control Status DAP 2360 Configuration Logout T Help VLAN Status Disable Enable VLAN Mode Static VLAN Lit Port List PMID Setting Add Edit VLAN PVID Auto Assign Status Disable Mgmt LAN 39 Section 3 Configuration Intrusion The Wireless Intrusion Protection window is used to set APs as All Valid Neighborhood Rogue and New Click the Save button to let your changes take effect AP List The choices include All Valid Neighbor Rogue and New D Link PA Home Maintenance v Configuration 2 DAP 2360 i Basic Settings Wireless B LAN Pv6 Advanced Settings E Performance Wireless Resource Multi SSID and C SS Last Seen Status Detect Clickthis button to initiate a scan of the network gt Internal RADIUS Server ARP Spoofing Prevention E Bandwidth Optimization H B AP Array Captive Portal B DHCP Server Fiters Set as Valid Set as Neighborhood Set as Rogue Set as New Erf Traffic Control Mark All New Access Points as Valid Access Points H Status Mark All New Access Points as Ro
4. 79 Section 3 Configuration Login Settings Each of the five main categories display various hidden administrator parameters and settings Login Name Old Password New Password Confirm Password D Link DAP 2360 User Manual Enter a user name The default is admin When changing your password enter the old password here When changing your password enter the new password here The password is case sensitive A is a different character than a The length should be between 0 and 12 characters Enter the new password a second time for confirmation purposes D Link DAP 2360 Home SM Maintenance cil Configuration v gou f Help 2 DAP 2360 B Basic Settings Pe n e COO EE EN OE meee dii 1 amp flistatus Limit Administrator M System Name Settings Login Settings Console ELSE CMM SNMP SNMP Settings meee Ping Control j Setting aaa Central Central WiFiManager Setting NEN Setting B 80 Section 3 Configuration Console Settings Each of the five main categories display various hidden administrator parameters and settings Status Status is enabled by default Uncheck the box to disable the console Dlink DAP 2360 Maintenance v m Configuration v Console Select the type of protocol you would like to use Protocol Telnet or SSH Timeout Set to 1 Min 3 Mins 5 Mins 10 Mins 15 Mins or Never Console Settings i Status Console Proto
5. Channel Channel Width Remote AP MAC Address Select 2 4GHz from the drop down menu WDS is selected from the drop down menu Service Set Identifier SSID is the name designated for a specific wireless local area network WLAN The SSID s factory default setting is dlink The SSID can be easily changed to connect to an existing wireless network or to establish a new wireless network Enable or Disable SSID visibility Enabling this feature broadcasts the SSID across the network thus making it visible to all network users Enabling this feature automatically selects the channel that will provide the best wireless performance This feature is not supported in WDS mode All devices on the network must share the same channel To change the channel use the drop down menu to make the desired selection Use the drop down menu to choose 20 MHz or Auto 20 40 MHz Enter the MAC addresses of the APs on your net work that will serve as bridges to wirelessly connect multiple networks D Link DAP 2360 User Manual D Link Home ij V DAP 2360 a Basic Settings Wireless B LAN B pve Advanced Settings status DAP 2360 Maintenance v m Configuration v System B Logout M Help Wireless Band Mode Network Name SSID SSID Visibility Auto Channel Selection Enable v Disable Channel Channel Width WDS Remote AP MAC Address 2 6 Key Inde
6. Radius Port SPAP Secondary radius Server Settings Radius Port SPAP Radius Port SPAP Captive Profile 53 Section 3 Configuration Authentication Settings LDAP The Captive Portal is a built in web authentication server When a station connects to an AP the web browser will be redirected to a web authentication page In this window user can view and configure the Captive Portal settings After selecting LDAP as the Authentication Type we can configure the LDAP authentication that will be applied to each wireless client in this network Session Enter the session timeout value here This value can M a timeout 1 1440 be from 1 to 1440 minutes By default this value is 60 o minutes Tics Advanced Settings Session Timeout 1 1440 60 Minute s gt Performance Band Select 2 4GHz poe Ea moe SSID Index Primary SSID v SSID Index Select the SSID for this Authentication E 5 Internal RADIUS Server pRO Se Authentication Select the captive portal encryption type here B onnon omn A U Type Options to choose from are Web Redirection Username amp fl AP Array Password Passcode Remote RADIUS LDAP and POP3 iy In this section we ll discuss the LDAP option Login Page Upload m A I Filter Settings o MAC Bypass uthenticate Mode Web Redirection Defaultis Disabl
7. Authentication Settings POP3 the POP3 authentication that will be applied to each wireless client in this network Session timeout 1 1440 Band SSID Index Authentication Type Web Redirection State URL Path Server Port Connection Type Enter the session timeout value here This value can be from 1 to 1440 minutes By default this value is 60 minutes Select 2 4GHz Select the SSID for this Authentication Select the captive portal encryption type here Options to choose from are Web Redirection Username Password Passcode Remote RADIUS LDAP and POP3 In this section we ll discuss the POP3 option Default is Disable or select Enable to enable the website redirection feature Select whether to use either HTTP or HTTPS here After selecting either http or https enter the URL of the website that will be used in the space provided Enter the POP3 server s IP address or domain name here Port Enter the POP server s port number here Select the connection type here Options to choose from are None and SSL TLS D Link DAP 2360 User Manual Maintenance v DAP 2660 m H Basic Settings 6 H Advanced Settings gt Performance Wireless Resource Multi SSID VLAN Intrusion Schedule Internal RADIUS Server ARP Spoofing Prevention Bandwidth Optimization E AP Array EI Captive Portal Authentication Settings Login Page Upload gt PP Filter Settings gt MAC Bypass f
8. Maximum Multicast Bandwidth on Kbps HT20 40 Coexistence Enable Transfer DHCP Offer to Unicast Disable v Maximum wireless signal rate derived from IEEE Standard 802 11n and 802 1 1g specifications Actual data throughput may vary Network conditions and environmental factors including volume of network traffic building materials and construction and network overhead can lower actual data throughout rate D Link DAP 2360 User Manual 30 Section 3 Configuration Beacon Interval 25 500 DTM Interval 1 15 Transmit Power WMM Wi Fi Multimedia AckTime Out 2 4 GHZ 64 200 Short GI IGMP Snooping Multicast Rate Multicast Bandwidth Control Maximum Multicast Bandwidth HT20 40 Coexistence Transfer DHCP Offer to Unicast Beacons are packets sent by an access point to synchronize a wireless network Specify a value in milliseconds The default 100 is recommended Setting a higher beacon interval can help to save the power of wireless clients while setting a lower one can help a wireless client connect to an access point faster Select a Delivery Traffic Indication Message setting between 1 and 15 The default value is 1 DTIM is a countdown informing cli ents of the next window for listening to broadcast and multicast messages This setting determines the power level of the wireless transmission Transmitting power can be adjusted to eliminate overlap ping of wireless
9. Schedule Internal RADIUS Server t I ARP Spoofing Prevention Bandwidth Optimization AP Array ES Captive Portal B Authentication Settings i Login Page Upload l IP Filter Settings i MAC Bypass 9 DHCP Server O8 Fiters 8 Traffic Control H H Status Configuration v System DAP 2360 B Logout f Help Session Timeout 1 1440 Band SSID Index Authentication Type IP Interface Settings Web Redirection State URL Path Username Password Settings 60 Minute s 2 4GHz Primary SSID v Username Password v Disable v http v Username Password add dear SSID Index Save Edit Delete 51 Section 3 Configuration Authentication Settings Passcode The Captive Portal is a built in web authentication server When a station connects to an AP the web browser will be redirected to a web authentication page In this window user can view and configure the Captive Portal settings After selecting Passcode as the Authentication Type we can configure the Passcode authentication that will be applied to each wireless client in this network Session timeout 1 1440 Band SSID Index Authentication Type Web Redirection State URL Path Passcode Quantity Duration Last Active Day User Limit Enter the session timeout value here This value can be from 1 to 1440 minutes By default this value is 60
10. WDS with AP functioning as a wireless AP Wirelessly connect multiple networks Wireless Client AP acts as a wireless network adapter for your Ethernet enabled device D Link DAP 2360 User Manual 13 Section 2 Installation Getting Started N Internet Cable DSL Modem PoE Switch DAP 2360 802 11n Wireless Access Point 2 gt uA DAP 2360 VAN 802 11n Wireless Access Point 7 Computer 2 with Computer 3 with Wireless N Adapter Wireless N Adapter 1 You will need broadband Internet access 2 Consult with your cable or DSL provider for proper installation of the modem 3 Connect the cable or DSL modem to a router See the printed Install Guide included with your router 4 If you are connecting a desktop computer to your network install a wireless PCI adapter into an available PCI slot on your desktop computer 5 Install the drivers for your wireless CardBus adapter into a laptop computer D Link DAP 2360 User Manual Section 3 Configuration Configuration To configure the DAP 2360 use a computer that is connected to the DAP 2360 with an Ethernet cable see the Network Layout diagram Launch your web browser Type the IP address of the DAP 2360 in the address field http 192 168 0 50 and GIL UE TAE Vint tS DICIT TT press Enter Make sure that the IP addresses of the DAP 2360 and your computer are Tan as ei JO ATUM UR e n http 192 168 0 50 login php Note I
11. sss 93 Technical Specifications eere eere 95 Section 1 Product Overview Package Contents e D Link DAP 2360 AirPremier N Plenum Rated Gigabit PoE Access Point e Power Adapter CAT5 Ethernet Cable e CD ROM with User Manual P e Install Guide A e two detachable antennas B Note Using a power supply with a different voltage rating than the one included with the DAP 2360 will cause damage and void the warranty for this product System Requirements Computers with Windows Macintosh or Linux based operating systems with an installed Ethernet Adapter e For configuration the following web browsers are supported e Microsoft Internet Explorer 7 0 and higher e Mozilla Firefox 3 5 and higher Google Chrome 20 and higher e Apple Safari 5 0 and higher D Link DAP 2360 User Manual Section 1 Product Overview Introduction The DAP 2360 802 11n AP increases productivity by allowing you to work faster and more efficiently With the DAP 2360 bandwidth intensive applications like graphics or multimedia will benefit significantly because large files are now able to move across the network quickly The DAP 2360 is capable of operating in one of four different wireless networking modes access point WDS Wireless Distribution System with AP WDS or Wireless Client mode Use less wiring enjoy increased flexibility save time and money with PoE Power over Ethernet With PoE
12. Enter the RADIUS port Enter the RADIUS secret D Link DAP 2360 User Manual 35 Section 3 Configuration VLAN VLAN List The DAP 2360 supports VLANs VLANs can be created with a Name and VID Mgmt TCP stack LAN Primary Multiple SSID and WDS connection can be assigned to VLANs as they are physical ports Any packet which enters the DAP 2360 without a VLAN tag will have a VLAN tag inserted with a PVID The VLAN List tab displays the current VLANs VLAN Status Use the radio button to toggle between Enable or Disable Next go to the Add Edit VLAN tab D Link een to add or modify an item on the VLAN List tab E A Maintenance Configuration Systen m Hep D Link DAP 2360 User Manual 36 Section 3 Configuration Port List The Port List tab displays the current ports If you want to configure the guest and internal networks on a Virtual LAN VLAN the switch and DHCP server you are using must also support VLANs As a prerequisite step configure a port on the switch for handling VLAN tagged packets as described in the IEEE 802 1Q standard VLAN Status Port Name Tag VID Untag VID PVID Use the radio button to toggle to Enable Next go to the Add Edit VLAN tab to add or modify an item on the VLAN List tab The name of the port is displayed in this column The Tagged VID is displayed in this column The Untagged VID is displayed in this column The Port VLAN Identifier is displayed in this column
13. Configuration v DAP 2360 P Logout Help Wireless Schedule Add Schedule Rule Disable v Primary SSID Y All Week Select Day s Sun Mon Tue _ hour minute Wed Thu 24 hour time 24 hour time To the end time of the next day overnight 41 Section 3 Configuration Internal RADIUS Server The DAP 2360 features a built in RADIUS server Once you have finished adding a RADIUS account click the Save button to let your changes take effect The newly created account will appear in this RADIUS Account List The radio buttons allow the user to enable or disable the RADIUS account Click the icon in the delete column to remove the RADIUS account We suggest you limit the number of accounts below 30 User Name Enter a name to authenticate user access to the internal RADIUS server Password Enter a password to authenticate user access to the internal RADIUS server The length of your password should be 8 64 Status Toggle the drop down menu between Enable and Disable RADIUS Displays the list of users Account List D Link DAP 2360 User Manual 2 n D Link Maintenance v 2 DAP 2360 f Basic Settings Home Wireless B LAN B pve Advanced Settings B Performance H A A E Wireless Resource B Multi SSID B VLAN Intrusion B Schedule B I
14. D Link DAP 2360 User Manual D Link DAP 2360 Y Home Maintenance Systen 2 ogou I Help VLAN Status Disable Enable 37 Section 3 Configuration Add Edit VLAN The Add Edit VLAN tab is used to configure VLANs Once you have made the desired changes click the Save button to let your changes take effect VLAN Status Use the radio button to toggle to Enable D Link DAP 2360 Configuration VLAN ID Provide a number between 1 and 4094 for REN a the Internal VLAN EE mm VLAN Status Disable Enable VLAN Name Enter the VLAN to add or modify VLAN Mode Static VLAN List Port List Add Edit VLAN P Sees i ai cd ue A Schedule Internal RADIUS Server ARP Spoofing Prevention Bandwidth Optimization AP Array Captive Portal ES DHCP Server H Fiters E Traffic Control amp f Status D Link DAP 2360 User Manual 38 Section 3 Configuration PVID Setting The PVID Setting tab is used to enable disable the Port VLAN Identifier Auto Assign Status as well as to configure various types of PVID settings Click the Save button to let your changes take effect VLAN Status PVID Auto As sign Status Use the radio button to toggle between Enable and Disable Use the radio button to toggle PVID auto assign status to Enable D Link DAP 2360 User Manual D Link Home Maintenance 2 DAP 2360 E H Basic Settings B Wireless LAN
15. 38 1d 90 5d 18 SSID 1 7 c4 38 1d 90 5d 19 c4 38 1d 90 5d 1f Ethernet MAC Address Wireless MAC Address 192 168 0 50 255 255 255 0 N A Wireless 2 4GHz Network Name SSID Channel Data Rate 5296 Disconnect 69 Section 3 Configuration Client Information Client Information This window displays the wireless client information for clients currently connected to the DAP 2360 The following information is available for each client communicating with the DAP 2360 SSID MAC Band Authentication Signal Power Saving Mode Displays the SSID of the client Displays the MAC address of the client Displays the wireless band that the client is connected to Displays the type of authentication being used Displays the client s signal strength Displays the status of the power saving feature D Link DAP 2360 User Manual XJ D Link Home DAP 2360 Basic Settings H H Advanced Settings jB Performance B Wireless Resource i i Traffic Control P status Maintenance v Configuration System A Logout DAP 2360 27 Help Wireless band Wireless Wireless Mode Data Rate Beacon Interval 40 500 DTIM Interval 1 15 Transmit Power WMM Wi Fi Multimedia Ack Time Out 2 4GHz 48 200 Short GI IGMP Snooping Multicast Rate Multicast Bandwidth Control Maximum Multicast Ban
16. Configuration Settings B Auto RF iB Load Balance __ E Captive Portal _ Ef DHCP Server 8 Fitters E Traffic Control fS status Maintenance v DAP 2360 Configuration v y 9 Logout Allocate average BW for each station v 246z Primary SSID v Kbits sec V Kbits sec vi Add clear Lt LSS SSID Index Downlink Speed Uplink Speed 45 Section 3 Configuration Enable AP Array AP Array Name AP Array Password Scan AP Array List Connection Status AP Array List Current Members AP Array AP Array Scan The AP Array window is used to create up to 32 APs on a local network to be organized into a single group in order to increase ease of management Click the Save button to let your changes take effect Central WiFiManager and AP Array are mutually exclusive functions Select the check box to enable the AP array function The three modes that are available are Master Backup Master and Slave APs in the same array will use the same configuration The configuration will sync the Master AP to the Slave AP and the Backup Master AP when a Slave AP and a Backup Master AP join the AP array Enter an AP array name for the group here Enter an AP array password for the group here This password must be the same on all the APs in the group Click this button to initiate a scan of all the available APs currently on the network Display the AP ar
17. DHCP Server 9 Fitters _ E Traffic Control amp Status UJ RJ EJ EJ EJ IV IV FI m Configuration v P Logout MEETS Captive Portal Authentication 000000000 Session Timeout 1 1440 Band SSID Index Authentication Type IP Interface Settings Web Redirection State URL Path POP3 Settings Server Port Connection Type SSID Index 60 Minute s 5GHz v Primary SSID v POP3 v Disable v http 110 None X Captive Profile Save Edit Delete Section 3 Configuration Login Page Upload In this window users can upload a custom login web page that will be used by the captive portal feature Click the Browse button to navigate to the login style located on the managing computer and then click the Upload button to initiate the upload Upload Login Style From Local Hard Drive Login Page Style List In this field the path to the login style file that will be uploaded will be displayed Alternatively the path can be manually entered here Selectthe wireless band and login style that will be used in each SSID here Click Download button to download the template file for login page and Click Del button to delete the template file D Link DAP 2360 User Manual D Link HF Home X Maintenance v gt DAP 2360 Basic Settings amp f Advanced Settings B Performance Wireless Resource B Mutti SSID B VLAN
18. Key Update Interval PassPhrase Confirm PassPhrase RADIUS Server RADIUS Port RADIUS Secret Check the Enable Priority box at the top of this window to enable Select the priority from the drop down menu Select Enable or Disable When you select Open System toggle between Enable and Disable If Enable is selected the Key Type Key Size Key Index 1 4 Key and Confirm Keys must also be configured Select HEX or ASCII Select 64 Bits or 128 Bits Select from the 1st to 4th key to be set as the active key Input up to four keys for encryption You will select one of these keys in the Key Index drop down menu When you select either WPA Personal or WPA Enterprise you must also choose a WPA mode from the drop down menu AUTO WPA or WPA2 WPA2 Only or WPA Only WPA and WPA2 use different algorithms AUTO WPA or WPA2 allows you to use both WPA and WPA2 In addition you must configure Cipher Type and Group Key Update Interval Select Auto AES or TKIP from the drop down menu Select the interval during which the group key will be valid The default value of 1800 seconds is recommended When you select WPA Personal please enter a PassPhrase in the corresponding field When you select WPA Personal please re enter the PassPhrase entered in the previous item in the corresponding field When you select WPA Enterprise enter the IP address of the RADIUS server In addition you must configure RADIUS Port and RADIUS Secret
19. Prevention f Bandwidth Optimization O8 AP Array Ej Captive Portal i B Authentication Settings B Login Page Upload HB IP Filter Settings Upload File To upload a MAC bypass list file click Browse and Upload MAC File B MAC Bypass navigate to the MAC bypass list file saved on the A WESS Upload Fie 3 upload i d x Download MAC File computer and then click Upload Le Bec Control Danaea Driver Download Load MAC File To download MAC bypass list file click Download to Local Hard and to save the MAC bypass list Driver D Link DAP 2360 User Manual 58 Section 3 Configuration DHCP Server Dynamic Pool Settings The DHCP address pool defines the range of the IP address that can be assigned to stations in the network A Dynamic Pool allows wireless stations to receive an available IP with lease time control If needed or required in the network the DAP 2360 is capable of acting as a DHCP server Function En able Disable IP Assigned From The Range of Pool 1 254 Subnet Mask Gateway WINS Dynamic Host Configuration Protocol DHCP assigns dynamic IP addresses to devices on the network This protocol simplifies network management and allows new wireless devices to receive IP addresses automatically without the need to manually assign new IP addresses Select Enable to allow
20. reset Logout allows the user to safely log out from the access point s web configuration Help allows the user to read more about the given options to configure without the need to consult the manual The following pages will explain settings found in the configuration and system section in more detail D Link Home X DAP 2360 Basic Settings xi Advanced Settings H B Status D Link DAP 2360 User Manual Maintenance v m Model Name Firmware Version System Name Location System Time Up Time Operation Mode MAC Address SSID 1 7 IP Address DAP 2360 Configuration Syste 2 Logout T Help Save and Activate eybiscard Changes DAP 2360 2 00 18 17 06 04 14 2014 D Link DAP 2360 01 01 1970 00 00 52 0 Days 00 00 53 Access Point c4 38 1d 90 5d 20 c4 38 1d 90 5d 21 c4 38 1d 90 5d 27 192 168 0 50 87 Section 3 Configuration Restart the Device Restore to Factory Default Settings System Settings Click Restart to restart the DAP 2360 Click Restore to restore the DAP 2360 back to factory default settings D Link DAP 2360 User Manual System D Link Home DAP 2360 Basic Settings i Advanced Settings LES Performance Wireless Resource Multi SSID B VLAN 5 Intrusion 5 Schedule Internal RADIUS Server ARP Spoofing Prevention Bandwidth Optimization AP Array Captive Portal P DHCP Server H Dynamic Po
21. server translates domain names such as www dlink com into IP addresses Domain Name Specify the domain name for the network D Link DAP 2360 User Manual 62 Section 3 Configuration Current IP Mapping List This window displays information about the current assigned DHCP dynamic and static IP address pools This information is available when you enable DHCP server on the AP and assign dynamic and static IP address pools Current DHCP These are IP address pools the DHCP server has Dynamic assigned using the dynamic pool setting Profile Home Maintenance Configuration v Nm D Link DAP 2360 2 Help 2 DAP 2360 93 Basic Settings amp f Advanced Settings i B Performance Host Name Binding MAC Address Assigned IP Address Lease Time Wireless Resource E Multi SSID B VLAN Current DHCP Static Pools irs Intrusion Host Name Binding MAC Address Assigned IP Address fH Schedule i Internal RADIUS Server j i 8 ARP Spoofing Prevention Bandwidth Optimization GG AP Array E Captive Portal ES DHCP Server i Dynamic Pool Settings Static Pool Settings i Current IP Mapping List 6 Fiters i wo Traffic Control Status Host Name The host name of a device on the network that is assigned an IP address from the DHCP dynamic pool Binding MAC The MAC address of a device on the network that Address is assigned an IP address from th
22. to accept the changes made Enable Load Select to Enable or Disable the load balance m Balance feature here D Link DAP 2360 Home Maintenance Configuration v A Help Active Enter the active threshold value here Threshold 2 DAP 2360 E Basic Settings B wi t Ei Wires Enable Load Balance Disable V A LAN gt pe Active Threshold e Advanced Settings B Performance Wireless Resource B Internal RADIUS Server ARP Spoofing Prevention B Bandwidth Optimization Gf AP Array i B AP Array Scan E Configuration Settings E Auto RF Load Balance E Captive Portal Ef DHCP Server B f Fitters E Traffic Control B Status D Link DAP 2360 User Manual 49 Section 3 Configuration Session timeout 1 1440 Band SSID Index Authentication Type Web Redirection State URL Path Captive Portal Authentication Settings Web Redirection Only The Captive Portal is a built in web authentication server When a station connects to an AP the web browser will be redirected to a web authentication page In this window user can view and configure the Captive Portal settings After selecting Web Redirection Only as the Authentication Type we can configure the redirection website URL that will be applied to each wireless client in thi
23. with your firewall software for more information on disabling or configuring it D Link DAP 2360 User Manual 90 Section 6 Troubleshooting Configure your Internet settings Goto Start Settings Control Panel Double click the Internet Options Icon From the Security tab click the button to restore the settings to their defaults e Click the Connection tab and set the dial up option to Never Dial a Connection Click the LAN Settings button Make sure nothing is checked Click OK Go to the Advanced tab and click the button to restore these settings to their defaults Click OK three times e Close your web browser if open and open it e Access the web management Open your web browser and enter the IP address of your D Link access point in the address bar This should open the login page for your the web management e If you still cannot access the configuration unplug the power to the access point for 10 seconds and plug back in Wait about 30 seconds and try accessing the configuration If you have multiple computers try connecting using a different computer 2 What can do if I forgot my password If you forgot your password you must reset your access point Unfortunately this process will change all your settings back to the factory defaults To reset the access point locate the reset button hole on the rear panel of the unit With the access point powered on use a paperclip to hold the button down for 10 secon
24. 4 4 300 130 270 117 243 104 216 78 162 66 135 58 5 121 5 52 108 39 81 26 54 19 5 40 5 12 27 and 6 5 13 5 Mbps Maximum wireless signal rate derived from IEEE Standard 802 11g and 802 11n specifications Actual data throughput will vary Network conditions and environmental factors including volume of network traffic building materials and construction and network overhead lower actual data throughput rate Environmental factors will adversely affect wireless signal range D Link DAP 2360 User Manual 95 Appendix C Technical Specifications Dipole Antenna e 5dBi Gain 2 4 GHz Transmit Output Power 26dBm 2 4GHz Max Power Consumption e Max 8W with 12V DC e Max 9W with PoE LEDs e Power LAN e 2 4 GHz Temperature e Operating 0 C to 40 C e Storing 20 C to 65 C Humidity e Operating 10 90 non condensing e Storing 5 95 non condensing Certifications e FCC Class B IC UL WiFi Dimensions L2188mm Wz166mm Hz37mm Please note that operating frequency ranges vary depending on the regulations of individual countries and jurisdictions D Link DAP 2360 User Manual
25. AP to get system time from an NTP server Enter the NTP server URL or IP address Use the drop down menu to select your correct Time Zone Check the box to Enable Daylight Saving Time Use the drop down menu to select the correct Daylight Saving offset You can either manually set the time for your AP here or you can click the Copy Your Computer s Time Settings button to copy the time from the computer you are using Make sure that the computer s time is set correctly D Link DAP 2360 User Manual r2 D Link Maintenance Advanced Settings H Status Configuration Time Configuration Current Time 01 01 1970 00 04 33 Automatic Time Configuration DAP 2360 M Help GMT 08 00 Pacific Time US amp Canada Tijuana ins Month Week DayofWeek Current Time DST Start 3n ist sun J Daylight Saving Dates 12am DSTEnd n ist sm 12am x Set the Date and Time Manually Month Minute Year 2012 Date And Time 18 v 40 v Copy Your Computer s Time Settings Hour jul v Day 86 Section 3 Configuration Configuration and System These options are the remaining option to choose from in the top menu Configuration allows the user to save and activate or discard the configurations done System allows the user to restart the unit perform a factory
26. B Internal RADIUS Server B ARP Spoofing Prevention Bandwidth Optimization f AP Array B P Captive Portal B Authentication Settings Login Page Upload HB IP Filter Settings i MAC Bypass DHCP Server 8 Traffic Control f status Configuration v A Logout DAP 2360 ka Help The Left space Wireless Band ID Style Name Upload Login Style from file Upload Login Style From Local Hard Drive aS 457216 Byte s Login Page Style List 56 Section 3 Configuration IP Filter Settings Enter the IP address or network address that will be used in the IP filter rule For example an IP address like 192 168 70 66 or a network address like 192 168 70 0 This IP address or network will be inaccessible to wireless clients in this network Wireless Band Select 2 4GHz D Link DAP 2360 IP Address Enter the IP address or network address f Home Maintenance v 7 Configuration v System B Logout f Help DAP 2360 Basic Settings 8 9 Advanced Settings l B Performance fB Wireless Resource Subnet Mask Enter the subnet mask of the IP address or networks address Upload IP Filter To upload a IP filter list file click Browse and File navigate to the IP filter list file saved on the computer and then click Upload i Internal RADIUS Server ARP S
27. DAP 2360 Version 2 03 Wireless N PoE Access Point User Manual Table of Contents Product Overview 5 sisi scssccsssneisesssexrcscescireasvasetseveieeieasssevetenss 4 P 28 Package Contents oesenieanitsarit andare in nain 4 IPVO PPP TORRENS 29 System Requirements esed duo ete taedas 4 Advanced Settings saos iter ERR RU ORARE EN UNUS 30 Lgidtere Feo RI ETES 5 Pe Ol PENES oossdierondmivwehetaste n Tam Timeam 30 51r me 7 Wireless RESOUPCE ssccssscccssssscsssesssasscasssccssssscescsscstverscsesecssoscs 32 Multi SSID t 34 MAES LESS BASICS qpuisgaest fusitiinbeisi aaiae VLAN nren 36 Standards Based TECIINOINGY sanenisosnnian 2 VLAN List 36 Viareessinstaltauon CORSIOBERHOH S ithaca Aiud 19 POLS EISE sente eer OPT Dee aa 3 Hardware OvervieW ss sssssssssessssssseressssecressssssesossssssereessseeeees 11 Add Edit VLAN Li 38 SOQHEGEROWGHOVEEEUDSIHO A DOENonsduaRDC RUE le PVID SEU aim ino Stereo tk aane uso 39 Four Operational Modes s ssssssssssssssessssssesessssssesesees 13 IEEE DEED spares rerasanan e onde copiae etc dotati t rerox 40 Schedule m A 41 Getting Started e 14 Internal RADIUS Server 42 Configuration cerent toon to tenete nene en en nenne 15 ARP Spoofing Prevention es 43 Save and Activate Settings 16 Bandwidth Optimization a Basic SOLIS si
28. Enable which allow wireless clients to detect the wireless network By changing this setting to Disable wireless clients can no longer detect the wireless network and can only connect if they have the correct SSID entered Auto Channel Selection If you check Auto Channel Scan everytime when AP is booting up the AP will automatically find the best channel to use This is enabled by default Channel Indicate the channel setting for the DAP 2360 By default the AP is set to Auto Channel Scan The Channel can be changed to fit the channel setting for an existing wireless network or to customize the wireless network Channel Width Allows selection of the channel width you would like to operate in 20 MHz and Auto 20 40MHz allow both 802 11n and non 802 11n wireless devices on your network when the wireless mode is Mixed 802 11 b g n in 2 4G 802 11n wireless devices are allowed to transmit data using 40 MHz when the channel width is Auto 20 40 MHz Authentication For added security on a wireless network data encryption can be enabled There are several available Authentications type can be selected The default value for Authentication is set to Open System Open System For Open System authentication only the wireless clients with the same WEP key will be able to communicate on the wireless network The Access Point will remain visible to all devices on the network 89 Section 6 Troubleshooting Troubleshooting This chapter pr
29. ID SSID Visibility Auto Channel Selection Channel Channel Width Authentication Key Settings Encryption Key Type Key Index 1 4 Network Key Confirm Key 0 9 2 z A Z g 95 amp O E M 7L 7 DAP 2360 ff Help selection process only occurs when the AP is booting up All devices on the network must share the same channel To change the channel first toggle the Auto Channel Selection setting to Disable and then use the drop down menu to make the desired selection Note The wireless adapters will automatically scan and match the wireless settings D Link DAP 2360 User Manual 17 Section 3 Configuration Channel Width Allows you to select the channel width you would like to operate in Select 20 MHz if you are not using any 802 1 1n wireless clients Auto 20 40 MHz allows you to connect to both 802 11n and 802 11b g wireless devices on your network Authentication Use the drop down menu to choose Open System Shared Key WPA Personal WPA Enterprise or 802 11x Select Open System to communicate the key across the network Select Shared Key to limit communication to only those devices that share the same WEP settings If multi SSID is enabled this option is not available Select WPA Personal to secure your network using a password and dynamic key changes No RADIUS server is required Select WPA Enterprise to secure your network with the inclusion of a RADIUS server Select 802 1x to secure yo
30. Interface Settings Web Redirection State URL Path Passcode Settings Passcode Quantity Duration Last Active Time Passcode 60 2 4GHz Minute s Primary SSID v Passcode Disable v http Year 2015 Duration SSID Index Hour Month Jan Day1 Houri 00 add Gear Last Active Time Captive Profile User Limit Delete C sae Edit Delete 52 Section 3 Configuration Session timeout 1 1440 Band SSID Index Authentication Type Web Redirection State URL Path Radius Server Radius Port Radius Port Remote Radius Type Authentication Settings Remote RADIUS The Captive Portal is a built in web authentication server When a station connects to an AP the web browser will be redirected to a web authentication page In this window user can view and configure the Captive Portal settings After selecting Remote RADIUS as the Authentication Type we can configure the Remote RADIUS authentication that will be applied to each wireless client in this network Enterthe session timeout value here This value can be from 1 to 1440 minutes By default this value is 60 minutes Select 2 4GHz Select the SSID for this Authentication Select the captive portal encryption type here Options to choose from are Web Redirection Username Password Passcode Remote RADIUS LDAP and POP3 In this section we ll discuss the Remote RADIU
31. L Backup RADIUS Server Setting Optional RADIUS Server RADIUS Port 1812 RADIUS Secret 0 9 a z A Z 8 0_ O0 L lt gt Primary Accounting Server Setting Accounting Mode Accounting Server Accounting Port 1813 Accounting Secret 0 9 2 z A Z e 9o amp 0 amp DD x l Backup Accounting Server Setting Optional Accounting Server Accounting Port i813 Accounting Secret J 0 9 a 2 A Z G 5 amp amp Ol V7 26 Section 3 Configuration Key Update Interval RADIUS Server RADIUS Port RADIUS Secret 802 1x Authentication Select the interval during which the group key will be valid 300 is the recommended value A lower interval may reduce data transfer rates Enter the IP address of the RADIUS server Enter the RADIUS port Enter the RADIUS secret D Link DAP 2360 User Manual D Link V pap 2360 o g P6 B Advanced Settings P status Maintenance v Configuration v 2 Logout DAP 2360 f Help Mode Network Name SSID SSID Visibility Auto Channel Selection Channel Channel Width ae RADIUS Server Settings Key Update Interval Seconds RADIUS Server Mode RADIUS Server External Internal RADIUS Server RADUSPot RADIUS Secret L 0 9 a z A Z 8 0_ OD VL Backup RADIUS Server Setting Optional RADIUS Server RADIU
32. Mask 255 255 255 0 Default Gateway e al eden C Documents and Settings gt 92 Appendix B Networking Basics Statically Assign an IP address If you are not using a DHCP capable gateway router or you need to assign a static IP address please follow the steps below Step 1 Windows 2000 Click on Start gt Settings gt Control Panel gt Network Connections Windows XP Click on Start gt Control Panel gt Network Connections Windows Vista Click on Start gt Control Panel gt Network and Internet gt Network and Sharing Center gt Manage network connections Step 2 Right click on the Local Area Connection which represents your network adapter and select Properties Step 3 Highlight Internet Protocol TCP IP and click Properties Step 4 Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN IP address on your router Example If the router s LAN IP address is 192 168 0 1 make your IP address 192 168 0 X where X is a number between 2 and 99 Make sure that the number you choose is not in use on the network Set Default Gateway the same as the LAN IP address of your router 192 168 0 1 Set Primary DNS the same as the LAN IP address of your router 192 168 0 1 The Secondary DNS is not needed or you may D Link DAP 2360 User Manual 93 Appendix B Networking Basics enter a DNS server from your ISP Step 5 Click OK twice to save your settin
33. PA mode from the drop Es DAP 2360 down menu AUTO WPA or WPA2 WPA2 Only or D Link WPA Only WPA and WPA2 use different algorithms Home Maintenance m Configuration v gt Logout f Help V pap 2360 AUTO WPA or WPA2 allows you to use both WPA 2 lias Settings and WPA2 Wireless Band 2 pve Mode Cipher Type When you select WPA Personal you must also select 5 ma uua s AUTO AES or TKIP from the drop down menu EPR Channel Group Key Select the interval during which the group key will Channel Width Update be valid The default value of 1800 is recommended Authentication WPAPersonal Select Manual to enter your key PassPhrase PassPhrase Settings WPA Mode AUTO WPA or WPA2 v Cipher T Auto v Group Key Update Interval Periodical Key You can select Periodical Key Change to have the X e c MICI Change access point automatically change your PassPhrase Activated From sn 00 00 Enter the Activate From time and the time in hours to Time Interval 1 1 168 hour s change the key Ft Confirm PassPhrase notice 8 63 in ASCII or 64 in Hex PassPhrase When you select WPA Personal please enter a 0 2 2 2 4A 2 4 G5 95 8 0 O Vl 2 PassPhrase in the corresponding field D Link DAP 2360 User Manual 25 Section 3 Configuration WPA WPA2 Enterprise Authentication WPA Mode When WPA Enterprise is selected you must a
34. S Port 1812 RADIUS Secret 0 9 a z A Z 8 0_ OD VL Accounting Mode Disable Accounting Server Accounting Port 1813 Accounting Secret 0 9 a z A 2 1 8 0_ L lt gt Backup Accounting Server Setting Optional Accounting Server Accounting Port 1813 Accounting Secret 0 9 a z A Z 1 8 0_ G1 1 lt gt 27 Section 3 Configuration LAN LAN is short for Local Area Network This is considered your internal network These are the IP settings of the LAN interface for the DAP 2360 These settings may be referred to as private settings You may change the LAN IP address if needed The LAN IP address is private to your internal network and cannot be seen on the Internet Get IP From IP Address Subnet Mask Default Gateway DNS Static IP Manual is chosen here Choose this option if you do not have a DHCP server in your network or if you wish to assign a static IP address to the DAP 2360 When Dynamic IP DHCP is selected the other fields here will be grayed out Please allow about two minutes for the DHCP client to be functional once this selection is made The default IP address is 192 168 0 50 Assign a static IP address that is within the IP address range of your network Enter the subnet mask All devices in the network must share the same subnet mask Enter the IP address of the gateway in your ne
35. S option Default is Disable or select Enable to enable the website redirection feature Select whether to use either HTTP or HTTPS here After selecting either http or https enter the URL of the website that will be used in the space provided Enter the RADIUS server s IP address here Enter the RADIUS server s port number here Enter the RADIUS server s shared secret here Select the remote RADIUS server type here Currently only SPAP will be used D Link DAP 2360 User Manual D Link LY Home Maintenance v DAP 2360 Basic Settings B p Advanced Settings iB Performance H Wireless Resource A Mutti SSID VLAN B Intrusion B Schedule Internal RADIUS Server ARP Spoofing Prevention fB Bandwidth Optimization AP Array F Captive Portal i B Authentication Settings Login Page Upload IP Filter Settings B MAC Bypass 9 DHCP Server i Fiters 8 Traffic Control H H Status B D E Configuration System DAP 2360 Help Authentication Type IP Interface Settings Remote RADIUS Settings Radius Server Settings Radius Server Radius Secret Remote RADIUS Type Radius Server Radius Secret Remote RADIUS Type Third radius Server Settings Radius Server Radius Secret Remote RADIUS Type SSID Index Session Timeout 1 1440 60 Band 2 4GHz SSID Index Primary SSID Remote RADIUS Web Redirection State Disable URL Path http
36. Settings Login Settings Console Settings SNMP Settings Ping Control Setting M Central WiFiManager Setting IV Enable Central WiFiManager D Link DAP 2360 User Manual 83 Section 3 Configuration Upload Firmware From Local Hard Drive Language Pack Upgrade Upload SSL Certification From Local Hard Drive Firmware and SSL Certification Upload This page allows the user to perform a firmware upgrade A Firmware upgrade is a function that upgrade the running software used by the access point This is a useful feature that prevents future bugs and allows for new features to be added to this product Please go to your local D Link website to see if there is a newer version firmware available The current firmware version is displayed above the file location field After downloading the most recent version of firmware for the DAP 2360 from http support dlink com to your local computer use the Browse button to locate the firmware file on your computer Click Upload to update the firmware version Please don t turn the power off while upgrading You may load a language pack to display the utility in another language Click Browse to locate the language pack file on your local computer After selecting and opening the file click Upload to upload the file to the DAP 2360 Click Browse to locate the SSL Certification file on your local computer After selecting and opening the file click Upload to upload the f
37. Sytem v Channel To change the channel use the drop down menu to make E er Pads the desired selection Note The wireless adapters will Key Type Hx v KeySze ses Key Index 1 4 iv automatically scan and match the wireless settings pe Confirm Key Channel Width Indicates whether the device is capable of 20MHz Osana zmes e OD lt gt operation only or both 20MHz and 40MHz operation D Link DAP 2360 User Manual 19 Section 3 Configuration CRemote AP MAC Enter the MAC addresses of the APs on your network that will serve as bridges to wirelessly connect multiple networks Address Site Survey Click on the Scan button to search for available wireless networks then click on the available network that you want to connect with Authentication Use the drop down menu to choose Open System Shared Key or WPA Personal Select Open System to communicate the key across the network Select Shared Key to limit communication to only those devices that share the same WEP settings If multi SSID is enabled this option is not available Select WPA Personal to secure your network using a password and dynamic key changes No RADIUS server is required D Link DAP 2360 User Manual 20 Section 3 Configuration WDS mode In WDS mode the DAP 2360 wirelessly connects multiple networks without functioning as a wireless AP Wireless Band Mode Network Name SSID SSID Visibility Auto Channel Selection
38. a network computer that has a dynamically assigned IP address D Link DAP 2360 User Manual 59 Section 3 Configuration DNS Enter the IP address of the Domain Name System DNS server The DNS server translates domain names such as www dlink com into IP addresses Domain Name Enter the domain name of the network if applicable An example of a domain name is www dlink com Lease Time The lease time is the period of time before the DHCP server will assign new IP addresses 60 31536000 sec D Link DAP 2360 User Manual 60 Section 3 Configuration Static Pool Setting The DHCP address pool defines the range of IP addresses that can be assigned to stations on the network A static pool allows specific wireless stations to receive a fixed IP without time control Function En able Disable Assigned IP Assigned MAC Address Subnet Mask Dynamic Host Configuration Protocol DHCP assigns IP addresses to wireless devices on the network This protocol simplifies network management and allows new wireless devices to receive IP addresses automatically without the need to manually assign IP addresses Select Enable to allow the DAP 2360 to function as a DHCP server Use the Static Pool Settings to assign the same IP address to a device every time you start up The IP addresses assigned in the Static Pool list must NOT be in the same IP range as the Dynamic Pool After you have assigned a static IP addr
39. area coverage between two access points where interference is a major concern For example if wireless cov erage is intended for half of the area then select 50 as the option Use the drop down menu to select 100 50 25 or 12 5 WMM stands for Wi Fi Multimedia Enabling this feature will improve the user experience for audio and video applications over a Wi Fi network To effectively optimize throughput over long distance links enter a value for Acknowledgement Time Out from 64 to 200 micro seconds in the 2 4 GHz in the field provided Select Enable or Disable Enabling a short guard interval can increase throughput However be aware that it can also increase the error rate in some installations due to increased sensitivity to radio frequency installations Select Enable or Disable Internet Group Management Protocol allows the AP to recognize IGMP queries and reports sent between routers and an IGMP host wireless STA When IGMP snooping is enabled the AP will forward multicast packets to an IGMP host based on IGMP messages passing through the AP Select the multicast rate for 2 4G band Adjust the multicast packet data rate here The multicast rate is supported in AP mode and WDS with AP mode including Multi SSIDs Set the multicast packets maximum bandwidth pass through rate from the Ethernet interface to the Access Point Enable this option to reduce interference from other wireless networks in your area If the channel widt
40. at the top of the page and then click Save and Activate Configuration D Link DAP 2360 User Manual 16 Section 3 Configuration Wireless Band Mode Network Name SSID SSID Visibility Auto Channel Selection Channel Basic Settings Wireless Access Point mode Select 2 4GHz from the drop down menu Select Access Point from the drop down menu The other three choices are WDS with AP WDS and Wireless Client Service Set Identifier SSID is the name designated for a specific wireless local area network WLAN The SSID s factory default setting is dlink The SSID can be easily changed to connect to an existing wireless network or to establish a new wireless network The SSID can be up to 32 characters and is case sensitive Enable or Disable SSID visibility Enabling this feature broadcasts the SSID across the network thus making it visible to all network users Enabling this feature automatically selects the channel that provides the best wireless performance Enable is set by default The channel D Link a Dap 2360 E Basic Settings B Wireless D LAN pve S Advanced Settings B Wireless Resource D Multi SSID B Internal RADIUS Server i 1B ARP Spoofing Prevention LB Bandwidth Optimization 9 3 AP Array a B Captive Portal m D DHCP Server 9 S Filters 9 Traffic Control status Home Maintenance Configuration Logout Mode Network Name SS
41. ays the current wireless band rate Select Enable or Disable The default is Enable When disabled all data from the Ethernet to associated wireless devices will be blocked Wireless devices can still send data to the Ethernet The default value is Enable which allows stations to inter communicate by connecting to a target AP When disabled wireless stations cannot exchange data through the AP D Link DAP 2360 User Manual D Link x Home Maintenance v gt DAP 2360 Basic Settings 6 Advanced Settings LB Performance Wireless Resource Multi SSID VLAN Intrusion Schedule Internal RADIUS Server ARP Spoofing Prevention Bandwidth Optimization 8 1 AP Array i Captive Portal B p DHCP Server EH Fiters LE Wireless MAC ACL WLAN Partition Traffic Control iS status BIY FJ RIY BIY IJ RIY BIY Rh DAP 2360 Configuration v System Logout O Help Wireless Band Link Integrity Ethernet to WLAN Access Internal Station Connection Primary SSID Multi SSID 1 Multi SSID 2 Multi SSID 3 Multi SSID 4 Multi SSID 5 Multi SSID 6 Multi SSID 7 2 4GHz Disable 65 Section 3 Configuration Traffic Control Uplink Downlink Settings The uplink downlink setting allows users to customize the downlink and uplink interfaces including specifying downlink uplink bandwidth rates in Mbits per
42. bps Compatible with the 802 11b standard to provide a wireless data rate of up to 11Mbps allowing you to migrate your system to the 802 11n and 802 11g standards on your own schedule without sacrificing connectivity Compatible with the 802 11g standard to provide a wireless data rate of up to 54Mbps in the 2 4GHz frequency range Better security with WPA The DAP 2360 can securely connect wireless clients on the network using WPA Wi Fi Protected Access to provide a much higher level of security for your data and communications than its previous versions D Link Central WiFiManager software The real time display of the network s topology and AP s information makes network configuration and management quick and simple SNMP for management The DAP 2360 is not just fast but also supports SNMP v 3 for better network management Utilizes OFDM technology Orthogonal Frequency Division Multiplexing Supports 802 3af Power over Ethernet Supports one 10 100 1000M Ethernet port Operates in the 2 4 2 4835GHz frequency ranges Web based interface for managing and configuring Maximum wireless signal rate derived from IEEE Standard 802 11n and 802 119 specifications Actual data throughput may vary Network conditions and environmental factors including volume of network traffic building materials and construction and network overhead can lower actual data throughout rate D Link DAP 2360 User Manual 7 Section 2 Installation Wi
43. col Timeout SNMP ELLE Ping Control Setting Meee Control Setting B Central WiFiManager Setting I LIN D Link DAP 2360 User Manual 81 Section 3 Configuration SNMP Settings Each of the five main categories display various hidden administrator parameters and settings Status Check the box to enable the SNMP functions This option is disabled by D Link dar default e ome Maintenance 3 Configu on System A Logou i Help Public Community String Enter the public SNMP community S MM dip string status Private Community String Enter the private SNMP community sting Trap Status Checkthe boxto enable Trap Status SNMP Semingein Status CI Enable Public Community String Private Community String Trap Status pue Enable Trap Server IP Ping Control Setting MO eeeeseseaesesesesesaise Control Setting W Trap Server IP Enter the Trap Server IP address Central WiFiManager Setting Bo D Link DAP 2360 User Manual 82 Section 3 Configuration Central WiFiManager Settings The Central WiFiManager section is used to configure and manage a set of APs on the Internet into a single group in order to increase ease of management Central WiFiManager and AP Array are mutually exclusive functions Enable Central Select to enable or disable the Central z WiFiManager WiFiManager D Link ee Home Maintenance v Configuration v System J ogot Help Limit Administrator System Name
44. ds Release the button and the access point will go through its reboot process Wait about 30 seconds to access the access point The default IP address is 192 168 0 50 When logging in the username is admin and leave the password box empty D Link DAP 2360 User Manual 91 Appendix B Networking Basics Networking Basics Check your IP address After you install your network adapter by default the TCP IP settings should be set to obtain an IP address from a DHCP server i e wireless router automatically To verify your IP address please follow the steps below Click on Start gt Run In the run box type cmd and click OK At the prompt type ipconfig and press Enter This will display the IP address subnet mask and the default gateway of your adapter If the address is 0 0 0 0 check your adapter installation security settings and the settings on your router Some firewall software programs may block a DHCP request on newly installed adapters If you are connecting to a wireless network at a hotspot e g hotel coffee shop airport please contact an employee or administrator to verify their wireless network settings D Link DAP 2360 User Manual ex C WINDOWS system32 cmd exe Microsoft Windows XP Version 5 1 26001 lt C Copyright 1985 2661 Microsoft Corp C Documents and Settings gt ipconf ig Windows IP Configuration Ethernet adapter Local Area Connection Conne dlink IP Add 10 5 7 114 Subnet
45. dwidth HT20 40 Coexistence Transfer DHCP Offer to Unicast Mixed 802 11n 802 11g and 802 11b Best Up to 300 Mbps 100 1 100 v Enable 48 us Enable Disable Disable Mbps Disable v Enable Disable v 70 Section 3 Configuration Channel Analyze Wireless Band Select 2 4GHz in default Detect Click the Detect button to scan AP List This will list the transmitting channels and quality D Link DAP 2360 User Manual D Link a Home Maintenance v Performance 5 Wireless Resource B Internal RADIUS Server ARP Spoofing Prevention Login Page Upload IP Filter Settings MAC Bypass DHCP Server B f Fiters i P Traffic Control Status DAP 2360 Configuration System Logout Help Upload Login Style from file The Left space 457216 Byte s Wireless Band ID Style Name 71 Section 3 Configuration Wireless Band Detect AP List WDS Information Select 2 4GHz in default Click the Detect button to scan This will list the transmitting channels and quality D Link DAP 2360 User Manual D Link Home Maintenance v 2 DAP 2360 H B Basic Settings E H Advanced Settings B Performance B Wireless Resource E Mult SSID B VLAN Intrusion Schedule Inter
46. e AP Array Configuration Wireless Basic Settings Wireless Advanced Settings Multiple SSID amp VLAN Advanced Functions Administration Settings Select to Enable or Disable the AP array configure feature here Select this option to specify the basic wireless settings that the APs in the group will inherit Select this option to specify the advanced wireless settings that the APs in the group will inherit Select this option to specify the multiple SSIDs and VLAN settings that the APs in the group will inherit Select this option to specify the other advanced settings that the APs in the group will inherit Select this option to specify the administrative settings that the APs in the group will inherit D Link DAP 2360 User Manual D Link Home Maintenance v Advanced Settings E Performance Multi SSID B Intrusion o SES Schedule UE Internal RADIUS Server B ARP Spoofing Prevention Bandwidth Optimization B f AP Array iB AP Array Scan i i B Configuration Settings Auto RF E Load Balance _ 6 Captive Portal DHCP Server Fiters E Traffic Control P Status DAP 2360 Configuration v f Help Enable AP Array Configuration Clear all Wireless Basic Settings W 47 Section 3 Configuration Auto RF In this windows users can view and configure the automatic radio frequency settings as well as configure the the a
47. e DHCP dynamic pool Assigned IP The current corresponding DHCP assigned IP Address address of the device iz Lease Time The length of time that the dynamic IP address will be valid Current DHCP Theseare the IP address pools ofthe DHCP server Static Pools assigned through the static pool settings Host Name The host name of a device on the network that is assigned an IP address from the DHCP dynamic pool Binding MAC The MAC address of a device on the network that is within the DHCP static IP address pool Address Assigned IP The current corresponding DHCP assigned static IP address of the device Address D Link DAP 2360 User Manual 63 Section 3 Configuration Wireless Band Access Control List MAC Address MAC Address List Upload ACL File Download ACL File Displays the current wireless band rate Select Disable to disable the filters function Select Accept to accept only those devices with MAC addresses in the Access Control List All other devices not on the list will be rejected Select Reject to reject the devices with MAC addresses on the Access Control List All other devices not on the list will be accepted Enter each MAC address that you wish to include in your filter list and click Add When you enter a MAC address it appears in this list Highlight a MAC address and click Dele
48. e is to follow these basic guidelines 1 Keep the number of walls and ceilings between the access point and other network devices to a minimum Each wall or ceiling can reduce your adapter s range from 3 90 feet 1 30 meters Position your devices so that the number of walls or ceilings is minimized Be aware of the direct line between network devices A wall that is 1 5 feet thick 5 meters at a 45 degree angle appears to be almost 3 feet 1 meter thick At a 2 degree angle it looks over 42 feet 14 meters thick Position devices so that the signal will travel straight through a wall or ceiling instead of at an angle for better reception Building Materials make a difference A solid metal door or aluminum studs may have a negative effect on the range Try to position access points wireless routers and computers so that the signal passes through drywall or open doorways Materials and objects such as glass steel metal walls with insulation water fish tanks mirrors file cabinets brick and concrete will degrade your wireless signal Keep your product away at least 3 6 feet or 1 2 meters from electrical devices or appliances that generate RF noise Ifyou are using 2 4GHz cordless phones or X 10 wireless products such as ceiling fans lights and home security systems your wireless connection may degrade dramatically or drop completely Make sure your 2 4GHz phone base is as far away from your wireless devices a
49. e or select Enableto enable the website DHCP Server an T State redirection feature d pus tm s Password Pene Base DN ou dc URL Path Select whether to use either HTTP or HTTPS here After pate ae selecting either http or https enter the URL of the ips m E website that will be used in the space provided iud iiid Server Enterthe LDAP server s IP address or domain name here SSID Index Captive Profile Port Enter the LDAP server s port number here Authenticate Selectthe authentication mode here Options to choose Mode from are Simple and TLS Username Enter the LDAP server account s username here Password Enter the LDAP server account s password here Base DN Enter the administrator s domain name here Account Enter the LDAP account attribute string here Attribute This string will be used to search for clients Identity Enter the identity s full path string here Alternatively select the Auto Copy checkbox to automatically add the generic full path of the web page in the identity field D Link DAP 2360 User Manual Section 3 Configuration The Captive Portal is a built in web authentication server When a station connects to an AP the web browser will be redirected to a web authentication page In this window user can view and configure the Captive Portal settings After selecting POP3 as the Authentication Type we can configure
50. ect the percentage of RSSI here When the RSSI of wireless clients is lower than the specified percentage the device disconnects the wireless clients When Data Rate is selected in the Aging out drop down menu select the threshold of data rate here When the data rate of wireless clients is lower than the specified number the device disconnects the wireless clients Use the drop down menu to Enable the function When enabled the device denies the connection request from the wireless clients with the RSSI lower than the specified threshold below Set the ACL RSSI Threshold D Link DAP 2360 User Manual 33 Section 3 Configuration Enable Multi SSID Band Index SSID SSID Visibility Security Multi SSID The device supports up to four multiple Service Set Identifiers In the Basic gt Wireless section you can set the Primary SSID The SSID s factory default setting is dlink The SSID can be easily changed to connect to an existing wireless network or to establish a new wireless network Check to enable support for multiple SSIDs This read only value is the current band setting You can select up to three multi SSIDs With the Primary SSID you have a total of four multi SSIDs Service Set Identifier SSID is the name designated for a specific wireless local area network WLAN The SSID s factory default setting is dlink The SSID can be easily changed to connect to an existing wireless network or to estab
51. ent mode The channel used will be displayed and matches the AP that the DAP 2360 is connected to when set to Wireless Client mode Use the drop down menu to choose 20 MHz or Auto 20 40 MHz Click on the Scan button to search for available wireless networks then click on the available network that you want to connect with Use the drop down menu to choose Open System or WPA Personal Select Open System to communicate the key across the network Select WPA Personal to secure your network using a password and dynamic key changes No RADIUS server is required Check to enable clone MAC This feature will allow you to change the MAC address of the access point to the MAC address of a client Select the MAC source from the drop down menu Enter the MAC address that you would like to assign to the access point D Link DAP 2360 User Manual D Link Home 2 DAP 2360 Basic Settings B Wireless LAN 3 Pv 51 9 Advanced Settings P status Maintenance v Wireless Band Mode Network Name SSID SSID Visibility Auto Channel Selection Channel Channel Width Site Survey Authentication Key Settings Encryption Key Type Key Index 1 4 Network Key Confirm Key Wireless MAC Clone Enable MAC Source MAC Address Configuration v 2 4GHz v Wireless Client Enable v Enable Auto 20 40 MHz Security B Logout 0 3 2 AZ G 96 8 0 OT VL 2
52. esource Multi SSID VLAN Intrusion Schedule Internal RADIUS Server ARP Spoofing Prevention Bandwidth Optimization AP Array AP Array Scan Configuration Settings Auto RF Load Balance v wwe Y amp A RU RO RV RJ RJ RO RO RJ Ely Fly RI Hl E Captive Portal DHCP Server ELM Fiters 5 8 Traffic Control D Status Enable Bandwidth Optimization Downlink Bandwidth Uplink Bandwidth a m Configuration v Disable V Mbits sec Mbits sec SSID Index Downlink Speed DAP 2360 Help Uplink Speed 44 Section 3 Configuration Allocate specific BW for SSID Band SSID Index Downlink Speed Uplink Speed All clients share the total bandwidth Use the drop down menu to toggle the wireless band between 2 4GHz Use the drop down menu to select the SSID for the specified wireless band Enter the limitation of the downloading speed in either Kbits sec or Mbits sec for the rule Enter the limitation of the uploading speed in either Kbits sec or Mbits sec for the rule D Link DAP 2360 User Manual 2 DAP 2360 B f Basic Settings D Link Home B Wireless B LAN E pve Advanced Settings B Performance B Wireless Resource B Multi SSID B VLAN gt Intrusion gt Schedule Internal RADIUS Server B ARP Spoofing Prevention B Bandwidth Optimization EH AP Array B AP Array Scan B
53. ess to a device via its MAC address click Save the device will appear in the Assigned Static Pool at the bottom of the screen You can edit or delete the device in this list Enter the MAC address of the device requesting association here D Link DAP 2360 2 ES Home Maintenance v amp f Basic Settings es Advanced Settings i Performance B Wireless Resource LED Muli ssID IE VLAN i gt Intrusion i amp ES gt Schedule B Internal RADIUS Server 2 ARP Spoofing Prevention Bandwidth Optimization wo AP Array Captive Portal P DHCP Server t B Dynamic Pool Settings 88 Static Pool Settings B Current IP Mapping List Fiters Traffic Control 2 9 Status DAP 2360 IP Logout f Help Host Name Define the submask of the IP address specified in the IP Assigned From field D Link DAP 2360 User Manual 61 Section 3 Configuration Gateway Specify the Gateway address for the wireless network WINS Specify the Windows Internet Naming Service WINS server address for the wireless network WINS is a system that determines the IP address of a network computer with a dynamically assigned IP address if applicable DNS Enter the Domain Name System DNS server address for the wireless network The DNS
54. f you have changed the default IP address assigned to the DAP 2360 make sure to enter the correct IP address Enter the user name admin and your password Leave the password field blank by default and click Login DAP 2360 Login to the Access Point User Name Password Login Note Ifyou have changed the password make sure to enter the correct password D Link DAP 2360 User Manual 15 Section 3 Configuration After successfully logging into the DAP 2360 the following screen will appear D Link DAP 2360 Home Maintenance 2 DAP 2360 E ff Basic Settings Wireless Wireless Band B LAN ire E Advanced Settings JB Performance LB Wireless Resource SSID Visibility Multi SSID B vuan Network Name SSID Auto Channel Selection B Intrusion Channel Schedule E Internal RADIUS Server Channel Width t 83 ARP Spoofing Prevention Authentication BH Bandwidth Optimization 8 f AP Array Key Settings 8 P Captive Portal Encryption H is Server Key Type s I 5 Traffic Control izi Su status Network Key Confirm Key Save and Activate Settings When making changes on most of the configuration screens in this section use the see button at the bottom of each screen to save not activate your configuration changes You may change settings to multiple pages before activating Once you are finished click the Configuration button located
55. gs D Link DAP 2360 User Manual You can get IP settings assigned automatically if your network supports this capability Otherwise you need to ask your network administrator for the appropriate IP settings Obtain an IP address automatically Use the following IP address IP address 192 168 0 52 Subnet mask 213 299 255 0 Default gateway 192 168 0 1 Obtain DNS server address automatically Use the following DNS server addresses Preferred DNS server 192 168 Alternate DNS server 94 Appendix C Technical Specifications Technical Specifications Standards Security e IEEE 802 11b e WPA Personal Enterprise e IEEE 802 11g e WPA2 Personal Enterprise e IEEE 802 11n e 802 1x IEEE 802 3 e WEP 64 128 bit IEEE 802 3u e SSID Broadcast Disable e IEEE 802 3af e MAC Address Access Control Network Management Wireless Frequency Range Web Browser interface ae HTTP 24 to 2 4835 GHz Secure HTTP HTTPS Operating Voltage e Central WiFiManager SNMP Support e 802 3af PoE or 12V 1A Private MIB Radio and Modulation Type e Command Line Interface For 802 11g n Telnet BPSK QPSK 16QAM and 64QAM with OFDM Secure SSH Telnet For 802 11b Data Rates DOPSK DBPSK DSSS and CCK For 802 11b 11 5 5 2 and 1 Mbps Operating Frequency For 802 119 For 802 11b g 54 48 36 24 18 12 9 and 6 Mbps 2 4 2 4835 GHz For 802 11n For 802 11n HT20 HT40 2 4 GHz Band 2 4 2 4835 GHz e 14
56. gue Access Points D Link DAP 2360 User Manual 40 Section 3 Configuration Wireless Schedule Name Index SSID Day s All Day s Start Time End Time Add Schedule Rule List Save Schedule The Wireless Schedule Settings window is used to add and modify scheduling rules on the device Click the Save button to let your changes take effect Use the drop down menu to enable the device s scheduling feature Enter a name for the new scheduling rule in the field provided Select the index from the drop down menu Enter the name of your wireless network SSID Toggle the radio button between All Week and Select Day s If the second option is selected check the specific days you want the rule to be effective on Check this box to have your settings apply 24 hours a day Enter the start time for your rule If you selected All Day this option will be greyed out Enter the end time for your rule Click to add the rule to the list This section will display the list of created schedules Clickthe Save button to save your created rules D Link DAP 2360 User Manual D Link Maintenance v V DAP 2360 Basic Settings 3 Advanced Settings Performance Wireless Resource Multi SSID VLAN Intrusion y BIY RJ BIY EY H Traffic Control Status
57. h The uplink bandwidth in 9 Clent IP optional Bandwidth Mbits per second This value is entered in the gn et HL Uplink Downlink Setting window Downlink Speed i _ Mbits sec f Traffic Control iB Uplink Downlink Settings Uplink Speed Mbits sec B QoS a Traffic M Add Clear E 3 f status Traffic Manager Rules Client IP Client MAC Downlink Speed Uplink Speed Edit Del D Link DAP 2360 User Manual 68 Section 3 Configuration Status Device Information Device This read only window displays the configuration Information settings of the DAP 2360 including the firmware version and the device s MAC address D Link DAP 2360 User Manual D Link Home Maintenance 2 DAP 2360 Basic Settings Advanced Settings Performance gt Wireless Resource B Muti SSID B VLAN gt Intrusion gt Schedule Internal RADIUS Server B ARP Spoofing Prevention Bandwidth Optimization AP Array f Captive Portal I DHCP Server P Fitters Traffic Control B Uplink Downlink Settings B Qos B Traffic Manager Estatus B Device Information Client Information WDS Information Channel Analyze B Statistics fS Log 1 7 E 8 E oe DAP 2360 Configuration B Logout Help Firmware Version 2 00 c4 38 1d 90 5d 18 Primary c4
58. h is operating at 40MHz and there is another wireless network s channel over lapping and causing interference the Access Point will automatically change to 20MHz Enable to transfer the DHCP Offer to Unicast from LAN to WLAN suggest to enable this function if stations number is larger than 30 D Link DAP 2360 User Manual 31 Section 3 Configuration Wireless Resource The Wireless Resource Control window is used to configure the wireless connection settings so that the device can detect the better wireless connection in your environment Wireless Select 2 4GHz band Connection Limit User Limit 11n Preferred Select Enable or Disable This is an option for load balancing This determines whether to limit the number of users accessing this device The exact number is entered in the User Limit field below This feature allows the user to share the wireless network traffic and the client using multiple APs If this function is enabled and when the number of users exceeds this value or the network utilization of this AP exceeds the percentage that has been specified the DAP 2360 will not allow clients to associate with the AP Set the maximum amount of users that are allowed access zero to 64 users to the device using the specified wireless band The default setting is 20 Use the drop down menu to Enable the 11n Preferred function The wireless clients with 802 11n protocol will have higher priority to connect to
59. ile to the DAP 2360 D Link DAP 2360 User Manual D Link Home pAp 2360 t E Basic Settings advanced Settings P status Maintenance v m Configuration v DAP 2360 Help Update Firmware From Local Hard Drive Firmware Version 2 00 Upload Firmware From File Jus Update SSL Certification From Local Hard Drive Upload Certificate From File Iss Upload Key From File a 84 Section 3 Configuration Upload File Download Configuration File D Link DAP 2360 User Manual Configuration File Upload Click the Browse button to locate a previously saved configuration file on your local computer After selecting the file click Upload to apply the configuration settings to the DAP 2360 Click Download to save the current DAP 2360 configuration to your local computer Note that if you save one configuration with the administrator s password now after resetting your DAP 2360 and then updating to this saved configuration file the password will be gone D Link Home Maintenance Config uration v DAP 2360 I Help 85 Section 3 Configuration Current Time Enable NTP Server NTP Server Time Zone Enable Daylight Saving Daylight Saving Dates Set the Date and Time Manually Time and Date Displays the current time and date settings Check to enable the
60. ings E Ping Control Setting M Central WiFiManager Setting E D Link DAP 2360 User Manual 77 Section 3 Configuration Limit Administrator Each of the five main categories display various hidden administrator parameters and settings Limit Administrator VLAN ID Limit Administrator IP IP Range Check the box provided and the enter the specific VLAN ID that the administrator will be allowed to log in from Check to enable the Limit Administrator IP address Enter the IP address range that the administrator will be allowed to log in from and then click the Add button D Link DAP 2360 User Manual D Link n DAP 2360 27 Maintenance v m Configuration v Limit Administrator Limit Administrator VLAN ID C Enable Limit Administrator IP CI Enable IP Range Fwm Te aaa 78 Section 3 Configuration System Name Settings Each of the five main categories display various hidden administrator parameters and settings System Name The name of the device The default name is D Link DAP 2360 Location The physical location of the device e g 72nd Floor D Link HQ D Link DAP 2360 User Manual D Link Maintenance DAP 2360 E Configuration v System Help Limit Administrator B System Name Settings System Name Location oi Login Settings M Console Settings Ping Control Setting WM ere B EHETS CTS GT AE SNMP Settings E
61. iver 2 4GHz Primary SSID v Subnet Mask ae Delete 73 Section 3 Configuration WLAN Traffic This page displays wireless network statistics Statistics for data throughput transmitted and received frames and frame errors D Link DAP 2360 User Manual WLAN Traffic D Link Home Maintenance v 2 DAP 2360 H Basic Settings amp f Advanced Settings LB Performance Wireless Resource 5 Multi SSID VLAN B Intrusion B Schedule B Internal RADIUS Server i Login Page Upload 1 88 IP Filter Settings B MAC Bypass E Fiters Traffic Control ARP Spoofing Prevention Authentication Settings Configuration v 2 Logout DAP 2360 ff Help Upload MAC File Upload File Load MAC File to Local Hard Driver MAC Address ae 74 Section 3 Configuration View Log The AP s embedded memory displays system and network messages including atime stamp and message type The log information includes but is not limited to the following items cold start AP upgrading firmware client associate and disassociate with AP and web login The web page holds up to 500 logs D Link DAP 2360 User Manual Log View Log x D Link Home DAP 2360 uu
62. ixed 802 11n 802 11g and 802 11b Mixed 802 11g and 802 11b and 802 11n Only Please note that when backwards compatibility is enabled for legacy 802 11g b clients degradation of 802 11n wireless performance is expected Indicate the base transfer rate of wireless adapters on the wireless LAN The AP will adjust the base transfer rate depending on the base rate of the connected device If there are obstacles or interference the AP will step down the rate This option is enabled in Mixed 802 11g and 802 11b mode The choices available are Best Up to 54 54 48 36 24 18 12 9 6 11 5 5 20r 1 D Link Home x DAP 2360 I Basic Settings 1 9 Advanced Settings i i Performance j Wireless Resource i 98 ARP Spoofing Prevention Bandwidth Optimization G J AP Array i 9 Captive Portal amp f DHCP Server B f Fiters Traffic Control H Status Maintenance v E Configuration System P Logout DAP 2360 Help Wireless band 2 4GHz Wireless On v Wireless Mode Mixed 802 11n 802 11g and 802 11b Data Rate Best Up to 300 Mbps Beacon Interval 40 500 100 DTIM Interval 1 15 1 Transmit Power 100 WMM Wi Fi Multimedia Enable Ack Time Out 2 4GHz 48 200 as us Short GI Enable IGMP Snooping Disable v Multicast Rate Disable Mbps Multicast Bandwidth Control Disable
63. le QoS Advanced QoS Downlink Bandwidth Uplink Bandwidth ACK DHCP ICMP DNS Priority User Defined 3 Priority Third Pronit User Defined Priority Other Traffic Priority Configuration v Mbits sec Mbits sec ity SM Limit 100 ity V Limit 100 V Limit 100 riority M Limit 10 t V Limit 100 Y Limit 106 V Limit 10 V Limit 150 DAP 2360 2 Logout m Help 67 Section 3 Configuration Traffic Manager The traffic manager feature allows users to create traffic management rules that specify how to deal with listed client traffic and specify downlink uplink speed for new traffic manager rules Click the Save button to let your changes take effect Traffic Use the drop down menu to Enable the traffic r DAP 2360 Manager manager feature D Link Maintenance Configuration v System A Help Unlisted Client Select Deny or Forward to determine how to Traffic deal with unlisted client traffic Advanced Setti fi 9 yr i Traffic Manager Wireless Resource Unlisted Clients Traffic Deny Forward Downlink The downlink bandwidth in Mbits per second i Downlink Bandwidth 100 Mbits sec Bandwidth This value is entered in the Uplink Downlink EL Uplink Bandwidth i00 Mbits sec 3 Schedule Setting window gt internal RADIUS Server Add Traffic Manager Rule ARP Spoofing Prevention B Bandwidth Optimization Hame Uplink Uplink Bandwidt
64. lish a new wireless network Enable or Disable SSID visibility Enabling this feature broadcasts the SSID across the network thus making it visible to all network users The Multi SSID security can be Open System WPA Personal WPA Enterprise or 802 1x For a detailed description of the Open System parameters please go to page 25 For a detailed D Link x Home lt Maintenance v la DAP 2360 B Basic Settings 71 9 Advanced Settings j 5 Performance 5 Wireless Resource E Mutti SSID iE VLAN b Intrusion PES Schedule jB Internal RADIUS Server i i 2 ARP Spoofing Prevention F Bandwidth Optimization B f AP Array Captive Portal f DHCP Server B f Fiters H H Traffic Control p Status Configuration v DAP 2360 2 Logout m Help Enable Muti SSID Wireless Settings L1 Enable Prion 2 4GHz Primary SSID dlink Enable Open System 0 Enable Encryption Add description of the WPA Personal parameters please go to page 26 For a detailed description of the WPA Enterprise parameters please go to page 27 For a detailed description of the O802 1x parameters please go to page 28 D Link DAP 2360 User Manual 34 Section 3 Configuration Priority WMM Wi Fi Multimedia Encryption Key Type Key Size Key Index 1 4 Key WPA Mode Cipher Type Group
65. lso select a WPA mode from the drop down menu AUTO WPA or WPA2 WPA2 Only or WPA Only WPA and WPA2 use different algorithms AUTO WPA or WPA2 allows you to use both WPA and WPA2 Cipher Type When WPA Enterprise is selected you must also select a cipher type from the drop down menu Auto AES or TKIP Group Key Select the interval during which the group key will Update be valid The recommended value is 1800 A lower Interval interval may reduce data transfer rates Network Access Enable or disable Microsoft Network Access Protection Protection RADIUS Server Enter the IP address of the RADIUS server RADIUS Port Enter the RADIUS port RADIUS Secret Enter the RADIUS secret D Link DAP 2360 User Manual DLink Home a DAP 2360 Basic Settings gt Wireless B LAN pve Advanced Settings Status DAP 2360 Maintenance v Configuration v 0 M Help Wireless Band Mode Network Name SSID SSID Visibility Auto Channel Selection Channel Channel Width Authentication RADIUS Server Settings WPA Mode AUTO WPA or WPA2 v Cipher Type Auto v Group Key Update Interval 5600 Seconds Network Access Protection rsp Disable Enable RADIUS Server Mode RADIUS Server External Internal Primary RADIUS Server Setting RADIUS Server RADIUSPort RADIUS Secret NNI CRECEN 0 9 a z AZ 80_ Ol V
66. minutes Select 2 4GHz Select the SSID for this Authentication Select the captive portal encryption type here Options to choose from are Web Redirection Username Password Passcode Remote RADIUS LDAP and POP3 In this section we ll discuss the Passcode option Default is Disable or select Enable to enable the website redirection feature Select whether to use either HTTP or HTTPS here After selecting either http or https enter the URL of the website that will be used in the space provided Enter the number of ticket that will be used here Enterthe duration value in hours forthis passcode Select the last active date for this passcode here Year Month and Day selections can be made Enter the maximum amount of users that can use this passcode at the same time D Link DAP 2360 User Manual D Link x Home DAP 2360 Basic Settings amp 9 Advanced Settings i Performance B Wireless Resource iB Multi SSID J VLAN L8 Intrusion H Schedule t 88 Internal RADIUS Server H ARP Spoofing Prevention Bandwidth Optimization B D AP Array B Captive Portal i Authentication Settings Login Page Upload B IP Filter Settings MAC Bypass amp f DHCP Server B f Fiters E Traffic Control H Status Maintenance v a 1 Configuration v System DAP 2360 Logout f Help Session Timeout 1 1440 Band SSID Index Authentication Type IP
67. mote Authentication Dial in User Service server a network administrator can define a list of authorized users who can access the wireless LAN When attempting to access a wireless LAN with WPA Enterprise configured the new client will be requested to enter a username with a password If the new client is authorized by the administration and enters the correct username and password then access is granted In the case where an employee leaves the company the network administrator is able to remove the previous employee from the authorized list to avoid compromising the network EAP Extensible Authentication Protocol is available through the Windows XP operating system You will need to use the same type of EAP protocol on all devices in your network when using the 802 1X feature Maximum wireless signal rate derived from IEEE Standard 802 11n and 802 1 1g specifications Actual data throughput may vary Network conditions and environmental factors including volume of network traffic building materials and construction and network overhead can lower actual data throughout rate D Link DAP 2360 User Manual 6 Section 1 Product Overview Features Four different operation modes Capable of operating in one of four different operation modes to meet your wireless networking needs Access Point WDS with AP WDS or Wireless Client Faster wireless networking with the 802 11n standard to provide a maximum wireless signal rate of up to 300 M
68. nal RADIUS Server E ARP Spoofing Prevention c E Bandwidth Optimization _ BB AP Array E Captive Portal Bf DHCP Server E D Fitters B Traffic Control i Uplink Downlink Settings A QoS B Traffic Manager Ei Status iE Device Information E Client Information E WDS Information Channel Analyze Statistics DAP 2360 Configuration v B Logout 2M Help Wireless Band Zanz v Evaluation ARssi 96 There are only three non overlapped channels in 2 4G band respectively 1 6 and 11 72 Section 3 Configuration Ethernet Traffic Statistics This page displays transmitted and received count statistics for packets and bytes D Link DAP 2360 User Manual Stats Ethernet D Link x Home DAP 2360 Basic Settings B f Advanced Settings I B Performance B Wireless Resource Mutti SSID gt Intrusion Schedule Internal RADIUS Server B ARP Spoofing Prevention Bandwidth Optimization 8 3 AP Array Captive Portal Authentication Settings Login Page Upload i B IP Filter Settings 2 MAC Bypass amp f DHCP Server 8l Fiers i 9 Traffic Control fS status Maintenance Configuration v System Logout DAP 2360 i Help IP Address Upload Fie Download IP Filter File Load IP Fiter Fie to Local Hard Dr
69. nternal RADIUS Server ARP Spoofing Prevention B Bandwidth Optimization AP Array gt AP Array Scan Configuration Settings Auto RF E Load Balance Captive Portal DHCP Server Fitters Traffic Control Status DAP 2360 RADIUS Account list User Name Delete Disable 42 Section 3 Configuration ARP Spoofing Prevention Gateway IP Address Gateway MAC Address ARP Spoofing Prevention The ARP Spoofing Prevention feature allows users to add IP MAC address mapping to prevent arp spoofing attack This check box allows you to enable the arp spoofing prevention function Enter a gateway IP address Enter a gateway MAC address D Link DAP 2360 User Manual D Link Home Maintenance 2 DAP 2360 E H Basic Settings E E Wireless i 4 B iPve EI Advanced Settings p Performance bB Wireless Resource i B Internal RADIUS Server 3 ARP Spoofing Prevention B Bandwidth Optimization AP Array 2 p AP Array Scan 0 PES Configuration Settings Db B Auto RF E Load Balance _ iB Captive Portal _ Ef DHCP Server m f Fiters E Traffic Control H Status DAP 2360 Configuration Syster B Logout I Help RADIUS Account list User Name Disable 43 Section 3 Configuration Bandwidth Optimization The Bandwidth Optimization window allows the user
70. ol Settings gt Static Pool Settings Current IP Mapping List E Fiters amp 3 Traffic Control fS status d Maintenance v Configuration v Current DHCP Static Pools Host Name Binding MAC Address System Assigned IP Address Assigned IP Address A Logout DAP 2360 W Lease Time Help 88 Section 3 Configuration Help Scroll down the Help page for topics and explanations D Link DAP 2360 User Manual Help Wireless Settings Allow you to change the wireless settings to fit an existing wireless network or to customize your wireless network Wireless Band Operating frequency band Choose 2 4GHz for visibility to legacy devices and for longer range Mode Select a function mode to configure your wireless network Function modes indude Access Point WDS Wireless Distribution System with AP WDS Wireless Client Function modes are designed to support various wireless network topology and applications Network Name SSID Also known as the Service Set Identifier this is the name designated for a specific wireless local area network WLAN The factory default setting is dlink The SSID can be easily changed to connect to an existing wireless network or to establish a new wireless network SSID Visibility Indicate whether or not the SSID of your wireless network will be broadcasted The default value of SSID Visibility is set to
71. orities and specific QoS Rules are not required QoS supports overlaps between rules If more than one rule matches a specific message flow the rule with the highest priority will be used QoS Quality of Service HTTP Automatic Enable this option if you want to allow QoS to prioritize your traffic Priority Classifiers Allows the access point to recognize HTTP transfers for many common audio and video streams and prioritize them above other traffic Such streams are frequently used by digital media players When enabled this option causes the access point to automatically attempt to prioritize traffic streams that it does not otherwise recognize based on the behavior that the streams exhibit This acts to de prioritize streams that exhibit bulk transfer characteristics such as file transfers while leaving interactive traffic such as gaming or VoIP running at a normal priority D Link DAP 2360 User Manual D Link Home 2 V DAp 2360 a Basic Settings Advanced Settings gt Performance gt Wireless Resource B Multi SSID B VLAN gt Intrusion gt Schedule B Internal RADIUS Server ARP Spoofing Prevention gt Bandwidth Optimization AP Array Captive Portal DHCP Server Fitters 9 Traffic Control 1 6 0 gt Uplink Downlink Settings B Qos gt Traffic Manager B Status Maintenance Enab
72. ovides solutions to problems that can occur during the installation and operation of the DAP 2360 Read the following descriptions if you are having problems The examples below are illustrated in Windows XP If you have a different operating system the screenshots on your computer will look similar to the following examples 1 Why can tl access the web based configuration utility When entering the IP address of the D Link access point 192 168 0 50 for example you are not connecting to a website on the Internet nor do you have to be connected to the Internet The device has the utility built in to a ROM chip in the device itself Your computer must be on the same IP subnet to connect to the web based utility e Make sure you have an updated Java enabled web browser We recommend the following Microsoft Internet Explorer 7 0 and higher Mozilla Firefox 3 5 and higher Google Chrome 20 and higher Apple Safari 5 0 and higher Verify physical connectivity by checking for solid link lights on the device If you do not get a solid link light try using a different cable or connect to a different port on the device if possible If the computer is turned off the link light may not be on Disable any internet security software running on the computer Software firewalls such as Zone Alarm Black Ice Sygate Norton Personal Firewall and Windows XP firewall may block access to the configuration pages Check the help files included
73. peed digital data over a radio wave utilizing OFDM Orthogonal Frequency Division Multiplexing technology OFDM works by splitting the radio signal into multiple smaller sub signals that are then simultaneously transmitted at different frequencies to the receiver OFDM reduces the amount of crosstalk interference in signal transmissions The D Link DAP 2360 will automatically sense the best possible connection speed to ensure the greatest possible speed and range IEEE 802 11n offers the most advanced network security features available today including WPA Maximum wireless signal rate derived from IEEE Standard 802 11n and 802 11g specifications Actual data throughput may vary Network conditions and environmental factors including volume of network traffic building materials and construction and network overhead can lower actual data throughout rate D Link DAP 2360 User Manual 9 Section 2 Installation Wireless Installation Considerations The D Link AirPremier N wireless access point lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network Keep in mind however that the number thickness and location of walls ceilings or other objects that the wireless signals must pass through may limit the range Typical ranges vary depending on the types of materials and background RF radio frequency noise in your home or business The key to maximizing wireless rang
74. poofing Prevention IP Address Subnet Mask 1 8 Bandwidth Optimization G p AP Array E Captive Portal i Authentication Settings B Login Page Upload B IP Filter Settings MAC Bypass DHCP Server 89 Fiters Traffic Control a Status Download IP To download IP Filter list file click Download and Filter File tosave the IP Filter list Load IP Fiter File to Local Downl Hard Driver Dewnieed D Link DAP 2360 User Manual 57 Section 3 Configuration MAC Bypass The DAP 2660 features a wireless MAC Bypass Once a user is finished with these settings click the Save button to let the changes take effect Wireless Band Select the wireless band for MAC Bypass D Link DAP 2360 923 ma Home Maintenance W Configuration v System Logout i Help SSID Index Select the SSID for MAC Bypass DAP 2360 EI P Basic Settings ee Advanced Settings 24GHz e Performance 3 Wireless Resource Primary SSID MAC Address Enter each MAC address that you wish to include in your bypass list and click Add MAC Address MAC Address When a MAC address is entered it appears in List this list Highlight a MAC address and click the Delete icon to remove it from this list 25 Internal RADIUS Server ARP Spoofing
75. ray connection status This table displays the current AP array status for the following parameters Array Name Master IP MAC Master Backup Master Slave and Total Thistable displays all the current array members The DAP 2360 AP array feature supports up to eight AP array members D Link DAP 2360 User Manual D Link DAP 2360 F zw p Y Home Maintenance v Configuration v i f Help DAP 2360 E 3 8 Basic Settings Hf Advanced Settings Enable AP Array Version 2 0 Performance Master Backup Master Slave AP Array Name peal AP Array Password ea Scan AP Array List Scan Internal RADIUS Server ARP Spoofing Prevention Connection Status Disconnect Bandwidth Optimization AP Array List AP Array y AP Array Scan Array Name Master IP Master BACKUP Shave Total Configuration Settings Master Auto RF Load Balance Captive Portal D DHCP Server P Fiters E Traffic Control a Status Y amp 8 RJ RU RIJ RJ RJ RO Bg EI EJ El Ry Current Members Index Role IP Address MAC Address Location 46 Section 3 Configuration Configuration Settings In the AP array configuration settings windows users can specify which settings all the APs in the group will inherit from the master AP Make the required selection in this window and click the Save button to accept the changes made Enabl
76. reless Basics D Link wireless products are based on industry standards to provide high speed wireless connectivity that is easy to use within your home business or public access wireless networks D Link wireless products provides you with access to the data you want whenever and wherever you want it Enjoy the freedom that wireless networking can bring to you WLAN use is not only increasing in both home and office environments but in public areas as well such as airports coffee shops and universities Innovative ways to utilize WLAN technology are allowing people to work and communicate more efficiently Increased mobility and the absence of cabling and other types of fixed infrastructure have proven to be beneficial to many users Wireless adapter cards used on laptop and desktop systems support the same protocols as Ethernet adapter cards allowing wireless users to use the same applications as those used on a wired network People use WLAN technology for many different purposes Mobility productivity increases when people can have access to data in any location within the operating range of their WLAN Management decisions based on real time information can significantly improve the efficiency of a worker Low implementation costs WLANS are easy to set up manage change and relocate Networks that frequently change can benefit from WLAN s ease of implementation WLANs can operate in locations where installation of wiring may be imprac
77. s network Enter the session timeout value here This value can be from 1 to 1440 minutes By default this value is 60 minutes Select 2 4GHz Select the SSID for this Authentication Select the captive portal encryption type here Options to choose from are Web Redirection Username Password Passcode Remote RADIUS LDAP and POP3 In this section we ll discuss the Web Redirection option Default setting is Enable when select Web Redirection Only Select whether to use either HTTP or HTTPS here After selecting either http or https enter the URL of the website that will be used in the space provided D Link DAP 2360 User Manual DAP 2360 D Link Home Maintenance m Configuration System A Logout M Help DAP 2360 H Basic Settings amp 9 Advanced Settings Performance Wireless Resource Band 2 Multi SSID SSID Index A VLAN Intrusion Authentication Type IP Interface Settings 5 Schedule 25 Int i RADIUS Si oed sin Web Redirection State URL Path Session Timeout 1 1440 60 Minute s 2 4GHz Primary SSD Web Redirection Only v 3 ARP Spoofing Prevention Enable http B IP Filter Settings i MAC Bypass Hf DHCP Server 8 Fiters E S Traffic Control H H Status SSID Index Captive Profile Edit Delete 50 Section 3 Configuration Authentication Settings Username Password The Captive Por
78. s possible The base transmits a signal even if the phone in not in use D Link DAP 2360 User Manual Section 2 Installation Hardware Overview reser d2V 1A Power Receptacle The supplied power adapter connects here Reset Button A pinhole button located beside the Ethernet socket is used to reset the system or restore the factory default settings Note After resetting the unit you will still be able to access the data on your hard drives LAN PoE Port An Gigabit Ethernet port that connects the unit to a network This port can also be used to supply power to this unit using Power over Ethernet D Link DAP 2360 User Manual Power LED This light will be solid green when the unit is powered on 2 4 GHz LED This light will be flickering green when the 2 4GHz frequency is in use LAN LED This light will be flickering green when there is active LAN traffic 11 Section 2 Installation Connect Power over Ethernet PoE Bi x I PoE SWITCH COMPUTER Connect one end of an Ethernet cable included with your access point to the LAN port on the DAP 2360 and the other end of the Ethernet cable to either your computer or to your PoE switch The AP can be powered on by a PoE switch or by the power adapter shipped with the AP D Link DAP 2360 User Manual 12 Section 2 Installation Four Operational Modes Access Point AP Create a wireless LAN Wirelessly connect multiple networks while still
79. second These values are also used in the QoS and Traffic Manager windows Once the desired uplink and downlink settings are finished click the Save button to let your changes take effect Downlink The downlink bandwidth in Mbits per second Bandwidth Uplink Uplink Bandwidth The uplink bandwidth in Bandwidth Mbits per second D Link DAP 2360 User Manual D Link V DAp 2360 EH Home 2 9 Basic Settings Advanced Settings gt Performance Wireless Resource Mutti SSID B VLAN Ej Intrusion B Schedule Internal RADIUS Server gt ARP Spoofing Prevention Bandwidth Optimization AP Array Captive Portal fS DHCP Server Fitters 99 Traffic Control Uplink Downlink Settings B QoS Traffic Manager Status 1 0 0 0 E amp Maintenance Downlink ink Bandwidth 1 300 plink Bandwidth 1 300 Configuration uplink Multi ssid1 Multi ssid5 Multi ssid2 Multi ssid6 DAP 2360 f Help 66 Section 3 Configuration QoS Quality of Service QoS enhances the experience of using a network by prioritizing the traffic of different applications A QoS Rule identifies a specific message flow and assigns a priority to that flow For most applications the priority classifiers ensure the right pri
80. tal is a built in web authentication server When a station connects to an AP the web browser will be redirected to a web authentication page In this window user can view and configure the Captive Portal settings After selecting Username Password as the Authentication Type we can configure the Username Password authentication that will be applied to each wireless client in this network Session timeout 1 1440 Band SSID Index Authentication Type Web Redirection State URL Path Username Password Enter the session timeout value here This value can be from 1 to 1440 minutes By default this value is 60 minutes Select 2 4GHz Select the SSID for this Authentication Select the captive portal encryption type here Options to choose from are Web Redirection Username Password Passcode Remote RADIUS LDAP and POP3 In this section we ll discuss the Username Password option Default is Disable or select Enable to enable the website redirection feature Select whether to use either HTTP or HTTPS here After selecting either http or https enter the URL of the website that will be used in the space provided Enter the username for the new account here Enter the password for the new account here D Link DAP 2360 User Manual D Link x7 Home X Maintenance v DAP 2360 c H Basic Settings H Advanced Settings j Performance t Wireless Resource LE Multi SSID VLAN B Intrusion
81. te to remove it from this list You may create an ACL list and upload it to the access point instead of manually entering the information Once created click the Browse button and locate your file Select it and then click Upload Click Download to export the ACL to a file on your computer D Link DAP 2360 User Manual Filters Wireless MAC ACL D Link J Home X Maintenance v DAP 2360 Basic Settings Advanced Settings 3 Performance kB Wireless Resource Mutti SSID SES Schedule Internal RADIUS Server i ARP Spoofing Prevention 2 Bandwidth Optimization D AP Array Captive Portal B DHCP Server B Fiters i Wireless MAC ACL M WLAN Partition amp Traffic Control fS status ose es t DAP 2360 Configuration v System 2 Logout 27 Help Wireless Band 2 4GHz Access Control List Disable v SSID Index Primary SSID v MAC Address Add MAC Address Delete Current Client Information MAC Address Band Authentication Signal Add Upload ACL File Upload File we Download ACL File Load ACL File to Local Hard Driver 64 Section 3 Configuration Wireless Band Link Integrity Ethernet to WLAN Access Internal Station Connection WLAN Partition Displ
82. ter the destination email address Enter the Email Server Address Enter the SMTP port Enter your email username Enter your email password Enter your email password again Select when to send the log to your email in hours You will receive an email when the log is full too D Link DAP 2360 User Manual D Link x Home gt DAP 2360 Basic Settings 1 9 Advanced Settings POE Performance L8 Wireless Resource Multi SSID B VLAN B Intrusion B Schedule B Internal RADIUS Server ARP Spoofing Prevention 5 Bandwidth Optimization f AP Array 6 Captive Portal Gf DHCP Server fB Dynamic Pool Settings fB Static Pool Settings bd Current IP Mapping List E Fiters Traffic Control D Status E Maintenance DAP 2360 m Configuration v System A Logout f Help Disable v Domain Name dlink ap Host Name MAC Address IP Address 76 Section 3 Configuration Maintenance Administration Settings Check one or more of the five main categories to display the various hidden administrator parameters and settings displayed on the next five pages D Link DAP 2360 Maintenance Configuration Help System Name Settings Login Settings Console Settings SNMP Sett
83. the device D Link DAP 2360 User Manual D Link Home Maintenance Basic Settings Wireless LAN pve fay ly f Advanced Settings Performance Wireless Resource Multi SSID VLAN Intrusion Schedule gt gt a 2 eN ES E Traffic Control Status Internal RADIUS Server ARP Spoofing Prevention Bandwidth Optimization Wireless band Connection Limit User Limit 0 64 11n Preferred Network Utilization Aging out RSSI Threshold Data Rate Threshold ACL RSSI ACL RSSI Threshold Configuration 2 4GHz VW Disable V Disable V v EE P Logout DAP 2360 Help 32 Section 3 Configuration Network Utilization Aging out RSSI Threshold Data Rate Threshold ACL RSSI ACL RSSI Threshold Set the maximum utilization of this access point for service The DAP 2360 will not allow any new clients to associate with the AP if the utilization exceeds the value the user specifies Select a utilization percentage between 100 80 60 40 20 or 096 When this network utilization threshold is reached the device will pause one minute to allow network congestion to dissipate Use the drop down menu to select the criteria of disconnecting the wireless clients Available options are RSSI and Data Rate When RSSI is selected in the Aging out drop down menu sel
84. the DAP 2360 shares power and data over the CAT5 cable making the setup of your network less expensive and more convenient An ideal solution for quickly creating and extending a wireless local area network WLAN in offices or other workplaces trade shows and special events the DAP 2360 provides data transfer rates up to 300Mbps The 802 11n standard is backwards compatible with 802 11g and 802 11b devices WPA WPAQ2 is offered in two options Enterprise used for corporations and Personal used for home users WPA Personal and WPA2 Personal are directed towards home users who do not have the server based equipment required for user authentication This method of authentication is similar to WEP because you define a Pre Shared Key on the wireless router AP Once the pre shared key is confirmed and satisfied at both the client and access point access is then granted The encryption method used is referred to as the Temporal Key Integrity Protocol TKIP which offers per packet dynamic hashing It also includes an integrity checking feature which ensures that the packets were nottampered with during wireless transmission WPA Enterprise and WPA2 Enterprise are ideal for businesses that already have existing security infrastructures established D Link DAP 2360 User Manual 5 Section 1 Product Overview Management and security implementation can now be centralized on a server participating on the network Utilizing 802 1X with a RADIUS Re
85. the DAP 2360 to function as a DHCP server Input the first IP address available for assignment on your network Enter the number of IP addresses available for assignment IP addresses are increments of the IP address specified in the IP Assigned From field All devices in the network must have the same subnet maskto communicate Enter the submask for the network here Enter the IP address of the gateway on the network D Link a Home X Maintenance v 2 DAP 2360 amp 9 Basic Settings 8 9 Advanced Settings f Performance H Wireless Resource LB Mult ssID b VLAN H B Intrusion B Schedule Internal RADIUS Server B ARP Spoofing Prevention Bandwidth Optimization B f AP Array 6 Captive Portal H H DHCP Server Dynamic Pool Settings Static Pool Settings i B Current IP Mapping List Fiters B m Traffic Control Status a Configuration DHCP Server Control Function Enable Disable Dynamic Pool Settings IP Assigned From The Range of Pool 1 254 Subnet Mask Gateway Domain Name Lease Time 60 31536000 sec System Disable v DAP 2360 Help Specify the Windows Internet Naming Service WINS server address for the wireless network WINS is a system that determines the IP address of
86. tical Installation and network expansion by avoiding the complications of troublesome cables a WLAN system can be fast and easy during installation especially since it can eliminate the need to pull cable through walls and ceilings Wireless technology provides more versatility by extending the network beyond the home or office Inexpensive solution wireless network devices are as competitively priced as conventional Ethernet network devices The DAP 2360 saves money by providing users with multi functionality configurable in four different modes Scalability Configurations can be easily changed and range from Peer to Peer networks suitable for a small number of users to larger Infrastructure networks to accommodate hundreds or thousands of users depending on the number of wireless devices deployed D Link DAP 2360 User Manual 8 Section 2 Installation Standards Based Technology The DAP 2360 Wireless Access Point utilizes the 802 11b 802 11g and 802 11n standards The IEEE 802 11n standard is an extension of the 802 11b and 802 11g standards that came before it It increases the maximum wireless signal rate up to 300Mbps within the 2 4GHz bands utilizing OFDM technology This means that in most environments within the specified range of this device you will be able to transfer large files quickly or even watch a movie in MPEG format over your network without noticeable delays This technology works by transmitting high s
87. tings ess 6 QO M 67 Traffic WAN AGEN occ ren ao iio Ro qm rims 68 SESS unosi em S OMEN 69 Device Information ssec a otio ee ee peii onn 69 Client Information scr Nadine vnnd 70 Channel Analyz amp auaaaneies paite tiri tnit 71 WDS Information ss oeiorioras SF FI pt RN Corto DOR Rs 72 s rae 73 EL ORIEL EET 73 WLAN Traffic ainsi ER han Fe EFE s accinua 74 LOU ee eee oU EL ee nee ee ee 75 VIEW LOO ec TR 75 Log SEttiNgS ceniris 76 Nan eB B siasisntsenthivortesenctssnexsdsdatciead nn nisi 77 Administration Settings iacent reserare neseets 77 Limit Administrator saasastesssssassssnssssnenccestectecesacscarsscitasiens 78 D Link DAP 2360 User Manual System Name SettingS ssssesssserssssserssserssssserssssessssee 79 LOGIT SEWING S csaoon admirer edo rode ae 80 Console Settings snos iaderebsirirb t ORE RII 81 SNMP Settings E 82 Central WiFiManager Settings 83 Firmware and SSL Certification Upload 84 Configuration Hle Upload verre 85 Time and Date rt eee eee 86 Configuration and System reiecta 87 cuc rS 88 System Settings shi ard tees d aie RE 88 TeV o ERIT 89 Troubleshooting ccr ei REED Rev EXER YHP YR ES IM EY E ENKEH VERS 90 Networking Basics oi ide Gi bte XE ESPERE ECHO EXER SERES 92 Check your IP a Gres uiti prts tmcrneeres 92 Statically Assign an IP address
88. to manage the bandwidth of the device and arrange the bandwidth for various wireless clients When the Bandwidth Optimization ruile is finished click the Add button To discard the Add Bandwidth Optimization Rule settings click the Clear button Click the Save button to let your changes take effect Enable Bandwidth Optimization Downlink Bandwidth Uplink Bandwidth Rule Type Allocate average BW for each station Allocate maximum BW for each station Allocate different BW for a b g n stations Use the drop down menu to Enable the Bandwidth Optimization function Enter the downlink bandwidth of the device in Mbits per second Enter the uplink bandwidth of the device in Mbits per second Use the drop down menu to select the type that is applied to the rule Available options are Allocate average BW for each station Allocate maximum BW for each station Allocate different BW for b g n stations and Allocte specific BW for SSID AP will distribute average bandwidth for each client Specify the maximum bandwidth for each connected client Reserve certain bandwidth for future clients The weight of 11b g n client is 10 20 70 20 80 AP will distribute different bandwidth for b g n clients D Link DAP 2360 User Manual D Link f Home Maintenance v pap 2360 S Basic Settings gt Wireless LAN IPv6 vanced Settings Performance Wireless R
89. twork If there is a gateway in your network please enter an IP address within the range of your network Enter the DNS IP address used here D Link DAP 2360 User Manual Xy Hom V DAP 2360 Basic Settings Wireless E pve Advanced Settings Status D Link GetIP From IP Address Subnet Mask Default Gateway DNS Maintenance v Configuration v Static IP Manual 192 168 0 50 255 255 255 0 E AOAaoUAZZ DAP 2360 B Logout Help 28 Section 3 Configuration IPv6 Enable IPv6 Check to enable the IPv6 D Link DAP 2360 Get IP From Auto is chosen here Choose this option the Home Maintenance Configuration System NCC OL DAP 2360 can get IPv6 address automatically 5 or use Static to set IPv6 address manually s tg When Auto is selected the other fields here will be Bee grayed out dos ed IP Address Enter the LAN IPv6 address used here Prefix Enter the LAN subnet prefix length value used here Default Enter the LAN default gateway IPv6 address used here Gateway D Link DAP 2360 User Manual 29 Section 3 Configuration Advanced Settings Performance Wireless Wireless Mode Data Rate Use the drop down menu to turn the wireless function On or Off The different combination of clients that can be supported include M
90. ur network using 802 1x authentication D Link DAP 2360 User Manual 18 Section 3 Configuration WDS with AP mode In WDS with AP mode the DAP 2360 wirelessly connects multiple networks while still functioning as a wireless AP Wireless Band Select 2 4GHz from the drop down menu D Link DAP 2360 Mode WDS with AP mode is selected from the drop down menu mi X Wantenence Configuration yste P I Hep T cine c Network Name Service Set Identifier SSID is the name designated for pe TEADET e SSID a specific wireless local area network WLAN The 5SID s Ea M suu eee s factory default setting is dlink The SSID can be easily 2 5 Sova a changed to connect to an existing wireless networkorto amp messo Auto Channel Selection Disable establish a new wireless network B iran Channel qum 2 SEa Siati uL ad SSID Visibility Enable or Disable SSID visibility Enabling this feature B Boraman Opimieston Renois AP MAC Ades broadcasts the SSID across the network thus making it S BB Gone hatt i amp visible to all network users oa amp raffic Con d i 2 ffic Control Auto Channel Enabling this feature automatically selects the channel Selection that will provide the best wireless performance This feature is not supported in WDS with AP mode The channel selection process only occurs when the AP is booting up Authentication Open
91. uto initiate period and threshold values Click the Save button to accept the changes made Enable Auto Select to Enable or Disable the auto RF feature ys RRO RF here D Link E Home Maintenance v m Configuration v 2 Help Click the Auto RF Optimize button to initiate 9 DAP 2360 Initiate Auto RF the auto RF optimization feature aoe L Enable Auto RF T 2 Pe Initiate Auto RF Auto Initiate Select the Enable or Disable the auto initiate Advanced Settings Milit pui Performance feature here Wireless Resource Auto Initiate Period hours 2 rg D RSSI Threshold Auto Initiate After enabling the auto initiate option the Bee RF Report Frequency seconde Period auto initiate period value can be entered here 2 Beet iii A Al ofing Prevention This value must be between 1 and 24 hours B Sandwich Optimization f AP Array amp AP Array Scan RSSI Threshold Select the RSSI threshold value here This value B seein Si is listed in the drop down menu in increments 3 Load Balance Captive Portal of 1096 from 1096 to 10096 BBB DHO Server Fitters Traffic Control RF Report Enter the RF report frequency value here fii status Frequency D Link DAP 2360 User Manual 48 Section 3 Configuration Load Balance In this window users can view and configure the AP array s load balancing settings Click the Save button
92. visssssosessninsvinsoooocooesosassnsnsnsontensvensvsesiesooesnsonesoosbes 17 AP AIT ay nnne 46 Wireless creensa nada E 17 AP Array SCAN serene 46 Access Point nodes ec dtt rrt 17 Configuration Settings id WDSwitHAPTmOd amp s LL 19 PEOR asesinar metere ote Orr 48 VOU SIGs cass I T TD 21 Load Balance e nnn 49 WiredaceChentimodas se e t ee 23 Captive Portal espana neam o pb 50 Open System Shared Key Authentication 24 Authentication Settings Web Redirection Only 50 WPA WPA2 Personal Authentication 25 Authentication Settings Username Password 51 WPA WPA2 Enterprise Authentication 26 Authentication Settings Passcode 52 802 1x Authentication 27 pt ene On Sc niga Seton eae Authentication Settings LDAP s 54 D Link DAP 2360 User Manual 2 Table of Contents Table of Contents Authentication Settings POP3 sss 55 Login Page Upload cs cca cn rat od Ep Pri isds 56 IP Filter SETUP ene ame rn eee 57 MAC CY ass uma ion dE rr in acc aa 58 BS uiu T C 59 Dynamic Pool Setbltes in ando dete tton dascess 59 Static Pool Setting aas iit i od ENESET EP an eREUS 61 Current IP Mapping List norte 63 Filters NINE 64 Wireless MAC FAC cinsassnnsuvenvvevsiessavssnncenctosessisiveeisvedaeniess 64 WLAN Pal BIEBOEL iiri ict a ebbe Eh Coetu sic 65 Tame CoD EO o nsssu c peto TH HA qo UNa 66 Uplink Downlink Set
93. x 1 4 1 Network Key Confirm Key Ld 0 9 a 2 A Z 8 0_ 0 1 lt gt 2 21 Section 3 Configuration Site Survey Click on the Scan button to search for available wireless networks then click on the available network that you want to connect with Authentication Use the drop down menu to choose Open System Shared Key or WPA Personal Select Open System to communicate the key across the network Select Shared Key to limit communication to only those devices that share the same WEP settings Select WPA Personal to secure your network using a password and dynamic key changes No RADIUS server is required D Link DAP 2360 User Manual 22 Section 3 Configuration Wireless Band Mode Network Name SSID SSID Visibility Auto Channel Selection Channel Channel Width Site Survey Authentication Enable MAC Source MAC Address Wireless Client mode Select 2 4GHz from the drop down menu Wireless Client is selected from the drop down menu Service Set Identifier SSID is the name designated for a specific wireless local area network WLAN The SSID s factory default setting is dlink The SSID can be easily changed to connect to an existing wireless network This option is unavailable in Wireless Client mode Enabling this feature automatically selects the channel that will provide the best wireless performance This feature is not supported in Wireless Cli

Authentication Settings - D-Link

Contents

Download Pdf Manuals

Related Search

Related Contents